This patch removed the old RCU debugfs interface and replaced it with
the new one.
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This patch implements the new 'rcu_pending' interface under each rsp
directory, by using the 'CPU units sequence reading', thus avoiding loss
of tracing data.
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This patch implements the new 'rcudata.csv' interface under each rsp
directory, by using the 'CPU units sequence reading', thus avoiding loss
of tracing data.
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This patch implements the new 'rcudata' interface under each rsp
directory, by using the 'CPU units sequence reading', thus avoiding loss
of tracing data.
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This patch add the fundamental facility used by the following patches, so we
can implement the 'CPU units sequence reading' later.
This helps us avoid losing data when there are too many CPUs and too
small of a buffer, since this new approach allows userspace to read out
the data one CPU at a time. Thus, if the buffer is not large enough,
userspace will get whatever CPUs fit, and can then issue another read
for the remainder of the data.
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This patch will create subdirectory according to each flavor of rcu, the new
structure will be:
/debugfs/rcu/ -> rsp_0
-> rsp_1
-> ...
So we can go to '/debugfs/rcu/rsp_0' and get the cpu info of rsp_0 there.
The flavors of RCU are currently rcu_bh, rcu_preempt, and rcu_sched.
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds the counters to rcu_state and updates them in
synchronize_rcu_expedited() to provide the data needed for debugfs
tracing.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tracing (debugfs) of expedited RCU primitives is required, which in turn
requires that the relevant data be located where the tracing code can find
it, not in its current static global variables in kernel/rcutree.c.
This commit therefore moves sync_sched_expedited_started and
sync_sched_expedited_done to the rcu_state structure, as fields
->expedited_start and ->expedited_done, respectively.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is a counter scheme similar to ticket locking that
synchronize_sched_expedited() uses to service multiple concurrent
callers with the same expedited grace period. Upon entry, a
sync_sched_expedited_started variable is atomically incremented,
and upon completion of a expedited grace period a separate
sync_sched_expedited_done variable is atomically incremented.
However, if a synchronize_sched_expedited() is delayed while
in try_stop_cpus(), concurrent invocations will increment the
sync_sched_expedited_started counter, which will eventually overflow.
If the original synchronize_sched_expedited() resumes execution just
as the counter overflows, a concurrent invocation could incorrectly
conclude that an expedited grace period elapsed in zero time, which
would be bad. One could rely on counter size to prevent this from
happening in practice, but the goal is to formally validate this
code, so it needs to be fixed anyway.
This commit therefore checks the gap between the two counters before
incrementing sync_sched_expedited_started, and if the gap is too
large, does a normal grace period instead. Overflow is thus only
possible if there are more than about 3.5 billion threads on 32-bit
systems, which can be excluded until such time as task_struct fits
into a single byte and 4G/4G patches are accepted into mainline.
It is also easy to encode this limitation into mechanical theorem
provers.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The ->onofflock field in the rcu_state structure at one time synchronized
CPU-hotplug operations for RCU. However, its scope has decreased over time
so that it now only protects the lists of orphaned RCU callbacks. This
commit therefore renames it to ->orphan_lock to reflect its current use.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
'start' is set to buf + buflen and do the '--' immediately.
Just set it to 'buf + buflen - 1' directly.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Pull rmdir updates into for-3.8 so that further callback updates can
be put on top. This pull created a trivial conflict between the
following two commits.
8c7f6edbda ("cgroup: mark subsystems with broken hierarchy support and whine if cgroups are nested for them")
ed95779340 ("cgroup: kill cgroup_subsys->__DEPRECATED_clear_css_refs")
The former added a field to cgroup_subsys and the latter removed one
from it. They happen to be colocated causing the conflict. Keeping
what's added and removing what's removed resolves the conflict.
Signed-off-by: Tejun Heo <tj@kernel.org>
All ->pre_destory() implementations return 0 now, which is the only
allowed return value. Make it return void.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
CGRP_WAIT_ON_RMDIR is another kludge which was added to make cgroup
destruction rollback somewhat working. cgroup_rmdir() used to drain
CSS references and CGRP_WAIT_ON_RMDIR and the associated waitqueue and
helpers were used to allow the task performing rmdir to wait for the
next relevant event.
Unfortunately, the wait is visible to controllers too and the
mechanism got exposed to memcg by 887032670d ("cgroup avoid permanent
sleep at rmdir").
Now that the draining and retries are gone, CGRP_WAIT_ON_RMDIR is
unnecessary. Remove it and all the mechanisms supporting it. Note
that memcontrol.c changes are essentially revert of 887032670d
("cgroup avoid permanent sleep at rmdir").
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Because ->pre_destroy() could fail and can't be called under
cgroup_mutex, cgroup destruction did something very ugly.
1. Grab cgroup_mutex and verify it can be destroyed; fail otherwise.
2. Release cgroup_mutex and call ->pre_destroy().
3. Re-grab cgroup_mutex and verify it can still be destroyed; fail
otherwise.
4. Continue destroying.
In addition to being ugly, it has been always broken in various ways.
For example, memcg ->pre_destroy() expects the cgroup to be inactive
after it's done but tasks can be attached and detached between #2 and
#3 and the conditions that memcg verified in ->pre_destroy() might no
longer hold by the time control reaches #3.
Now that ->pre_destroy() is no longer allowed to fail. We can switch
to the following.
1. Grab cgroup_mutex and verify it can be destroyed; fail otherwise.
2. Deactivate CSS's and mark the cgroup removed thus preventing any
further operations which can invalidate the verification from #1.
3. Release cgroup_mutex and call ->pre_destroy().
4. Re-grab cgroup_mutex and continue destroying.
After this change, controllers can safely assume that ->pre_destroy()
will only be called only once for a given cgroup and, once
->pre_destroy() is called, the cgroup will stay dormant till it's
destroyed.
This removes the only reason ->pre_destroy() can fail - new task being
attached or child cgroup being created inbetween. Error out path is
removed and ->pre_destroy() invocation is open coded in
cgroup_rmdir().
v2: cgroup_call_pre_destroy() removal moved to this patch per Michal.
Commit message updated per Glauber.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Glauber Costa <glommer@parallels.com>
This patch makes cgroup_create() fail if @parent is marked removed.
This is to prepare for further updates to cgroup_rmdir() path.
Note that this change isn't strictly necessary. cgroup can only be
created via mkdir and the removed marking and dentry removal happen
without releasing cgroup_mutex, so cgroup_create() can never race with
cgroup_rmdir(). Even after the scheduled updates to cgroup_rmdir(),
cgroup_mkdir() and cgroup_rmdir() are synchronized by i_mutex
rendering the added liveliness check unnecessary.
Do it anyway such that locking is contained inside cgroup proper and
we don't get nasty surprises if we ever grow another caller of
cgroup_create().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
CSS_REMOVED is one of the several contortions which were necessary to
support css reference draining on cgroup removal. All css->refcnts
which need draining should be deactivated and verified to equal zero
atomically w.r.t. css_tryget(). If any one isn't zero, all refcnts
needed to be re-activated and css_tryget() shouldn't fail in the
process.
This was achieved by letting css_tryget() busy-loop until either the
refcnt is reactivated (failed removal attempt) or CSS_REMOVED is set
(committing to removal).
Now that css refcnt draining is no longer used, there's no need for
atomic rollback mechanism. css_tryget() simply can look at the
reference count and fail if it's deactivated - it's never getting
re-activated.
This patch removes CSS_REMOVED and updates __css_tryget() to fail if
the refcnt is deactivated. As deactivation and removal are a single
step now, they no longer need to be protected against css_tryget()
happening from irq context. Remove local_irq_disable/enable() from
cgroup_rmdir().
Note that this removes css_is_removed() whose only user is VM_BUG_ON()
in memcontrol.c. We can replace it with a check on the refcnt but
given that the only use case is a debug assert, I think it's better to
simply unexport it.
v2: Comment updated and explanation on local_irq_disable/enable()
added per Michal Hocko.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
2ef37d3fe4 ("memcg: Simplify mem_cgroup_force_empty_list error
handling") removed the last user of __DEPRECATED_clear_css_refs. This
patch removes __DEPRECATED_clear_css_refs and mechanisms to support
it.
* Conditionals dependent on __DEPRECATED_clear_css_refs removed.
* cgroup_clear_css_refs() can no longer fail. All that needs to be
done are deactivating refcnts, setting CSS_REMOVED and putting the
base reference on each css. Remove cgroup_clear_css_refs() and the
failure path, and open-code the loops into cgroup_rmdir().
This patch keeps the two for_each_subsys() loops separate while open
coding them. They can be merged now but there are scheduled changes
which need them to be separate, so keep them separate to reduce the
amount of churn.
local_irq_save/restore() from cgroup_clear_css_refs() are replaced
with local_irq_disable/enable() for simplicity. This is safe as
cgroup_rmdir() is always called with IRQ enabled. Note that this IRQ
switching is necessary to ensure that css_tryget() isn't called from
IRQ context on the same CPU while lower context is between CSS
deactivation and setting CSS_REMOVED as css_tryget() would hang
forever in such cases waiting for CSS to be re-activated or
CSS_REMOVED set. This will go away soon.
v2: cgroup_call_pre_destroy() removal dropped per Michal. Commit
message updated to explain local_irq_disable/enable() conversion.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
No functional changes.
powerpc is the only user of arch_uprobe_enable/disable_step() helpers,
but they should die. They can not be used correctly, every arch needs
its own implementation (like x86 does). And they do not really help
even as initial-and-almost-working code, arch_uprobe_*_xol() hooks can
easily use user_enable/disable_single_step() directly.
Change arch_uprobe_*_step() to do nothing, and convert powerpc to use
ptrace helpers. This is equally wrong, powerpc needs the arch-specific
fixes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Add trace_options to the kernel command line parameter to be able to
set options at early boot. For example, to enable stack dumps of
events, add the following:
trace_options=stacktrace
This along with the trace_event option, you can get not only
traces of the events but also the stack dumps with them.
Requested-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Have the ring buffer commit function use the irq_work infrastructure to
wake up any waiters waiting on the ring buffer for new data. The irq_work
was created for such a purpose, where doing the actual wake up at the
time of adding data is too dangerous, as an event or function trace may
be in the midst of the work queue locks and cause deadlocks. The irq_work
will either delay the action to the next timer interrupt, or trigger an IPI
to itself forcing an interrupt to do the work (in a safe location).
With irq_work, all ring buffer commits can safely do wakeups, removing
the need for the ring buffer commit "nowake" variants, which were used
by events and function tracing. All commits can now safely use the
normal commit, and the "nowake" variants can be removed.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing_enabled file was used as a quick way to stop
tracers, and try to bring down overhead for things like
the latency tracers (irqsoff, wakeup, etc). But it didn't
work that well.
The tracing_on file was created as a really fast way to
stop recording into the ftrace ring buffer and can interact
with the kernel. That is a tracing_off() call in the kernel
can disable recording of events, and then from userspace one
could echo 1 into the tracing_on file to continue it. The
tracing_enabled function did too much to allow for this.
The tracing_on has taken over as a way to start and stop tracing
and the tracing_enabled file should not be used. But because of
its existance, it still confuses people. Over a year ago the
following commit was added:
commit 6752ab4a9c
Author: Steven Rostedt <srostedt@redhat.com>
Date: Tue Feb 8 13:54:06 2011 -0500
tracing: Deprecate tracing_enabled for tracing_on
This commit added a WARN_ON() if the tracing_enabled file's variable
was changed. After this was added, only LatencyTop complained, and
they soon fixed their tool as there was no reason that LatencyTop
should touch this file as it was using the perf ring buffers which
this file does not interact with. But since that time no one else
has complained about this WARN_ON(). Thus it is safe to assume that
this file is no longer needed. Time to get rid of it.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing_enabled file has been deprecated as it never was able
to serve its purpose well. The tracing_on file has taken over.
Instead of having code to keep tracing_enabled, have the tracing_enabled
file just set tracing_on, and remove the tracing_enabled variable.
This allows us to remove the tracing_enabled file. The reason that
the remove is in a different change set and not removed here is
in case we find some lonely userspace tool that requires the file
to exist. Then the removal patch will get reverted, but this one
will not.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function register_tracer() is only used by kernel core code,
that never needs to remove the tracer. As trace_events have become
the main way to add new tracing to the kernel, the need to
unregister a tracer has diminished. Remove the unused function
unregister_tracer(). If a need arises where we need it, then we
can always add it back.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The open function used by available_events is the same as set_event even
though it uses different seq functions. This causes a side effect of
writing into available_events clearing all events, even though
available_events is suppose to be read only.
There's no reason to keep a single function for just the open and have
both use different functions for everything else. It is a little
confusing and causes strange behavior. Just have each have their own
function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ring_buffer_oldest_event_ts() should return a value of u64 type, because
ring_buffer_per_cpu->buffer_page->buffer_data_page->time_stamp is u64 type.
Link: http://lkml.kernel.org/r/1349998076-15495-5-git-send-email-dhsharp@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because the "tsc" clock isn't in nanoseconds, the ring buffer must be
reset when changing clocks so that incomparable timestamps don't end up
in the same trace.
Tested: Confirmed switching clocks resets the trace buffer.
Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1349998076-15495-3-git-send-email-dhsharp@google.com
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch removes the timecompare code from the kernel. The top five
reasons to do this are:
1. There are no more users of this code.
2. The original idea was a bit weak.
3. The original author has disappeared.
4. The code was not general purpose but tuned to a particular hardware,
5. There are better ways to accomplish clock synchronization.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Tested-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the comments of function tick_sched_timer(), the sentence
"timer->base->cpu_base->lock held" is not right.
In function __run_hrtimer(), before call timer->function(),
the cpu_base->lock has been unlocked.
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Cc: fei.li@intel.com
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351098455.15558.1421.camel@cliu38-desktop-build
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
As irq_thread_check_affinity is called ONLY inside the while loop in
the irq thread, the core affinity is set only when an interrupt
occurs. This patch sets the core affinity right after the irq thread
is created and before it waits for interrupts. In real-tiime targets
that do not typically change the core affinity of irqs during
run-time, this patch will save additional latency of an irq thread in
setting the core affinity during the first interrupt occurrence for
that irq.
Signed-off-by: Sankara S Muthukrishnan <sankara.m@ni.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/CAFQPvXeVZ858WFYimEU5uvLNxLDd6bJMmqWihFmbCf3ntokz0A@mail.gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Attempts to retrigger nested threaded IRQs currently fail because they
have no primary handler. In order to support retrigger of nested
IRQs, the parent IRQ needs to be retriggered.
To fix, when an IRQ needs to be resent, if the interrupt has a parent
IRQ and runs in the context of the parent IRQ, then resend the parent.
Also, handle_nested_irq() needs to clear the replay flag like the
other handlers, otherwise check_irq_resend() will set it and it will
never be cleared. Without clearing, it results in the first resend
working fine, but check_irq_resend() returning early on subsequent
resends because the replay flag is still set.
Problem discovered on ARM/OMAP platforms where a nested IRQ that's
also a wakeup IRQ happens late in suspend and needed to be retriggered
during the resume process.
[khilman@ti.com: changelog edits, clear IRQS_REPLAY in handle_nested_irq()]
Reported-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1350425269-11489-1-git-send-email-khilman@deeprootsystems.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Siddhesh analyzed a failure in the take over of pi futexes in case the
owner died and provided a workaround.
See: http://sourceware.org/bugzilla/show_bug.cgi?id=14076
The detailed problem analysis shows:
Futex F is initialized with PTHREAD_PRIO_INHERIT and
PTHREAD_MUTEX_ROBUST_NP attributes.
T1 lock_futex_pi(F);
T2 lock_futex_pi(F);
--> T2 blocks on the futex and creates pi_state which is associated
to T1.
T1 exits
--> exit_robust_list() runs
--> Futex F userspace value TID field is set to 0 and
FUTEX_OWNER_DIED bit is set.
T3 lock_futex_pi(F);
--> Succeeds due to the check for F's userspace TID field == 0
--> Claims ownership of the futex and sets its own TID into the
userspace TID field of futex F
--> returns to user space
T1 --> exit_pi_state_list()
--> Transfers pi_state to waiter T2 and wakes T2 via
rt_mutex_unlock(&pi_state->mutex)
T2 --> acquires pi_state->mutex and gains real ownership of the
pi_state
--> Claims ownership of the futex and sets its own TID into the
userspace TID field of futex F
--> returns to user space
T3 --> observes inconsistent state
This problem is independent of UP/SMP, preemptible/non preemptible
kernels, or process shared vs. private. The only difference is that
certain configurations are more likely to expose it.
So as Siddhesh correctly analyzed the following check in
futex_lock_pi_atomic() is the culprit:
if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {
We check the userspace value for a TID value of 0 and take over the
futex unconditionally if that's true.
AFAICT this check is there as it is correct for a different corner
case of futexes: the WAITERS bit became stale.
Now the proposed change
- if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {
+ if (unlikely(ownerdied ||
+ !(curval & (FUTEX_TID_MASK | FUTEX_WAITERS)))) {
solves the problem, but it's not obvious why and it wreckages the
"stale WAITERS bit" case.
What happens is, that due to the WAITERS bit being set (T2 is blocked
on that futex) it enforces T3 to go through lookup_pi_state(), which
in the above case returns an existing pi_state and therefor forces T3
to legitimately fight with T2 over the ownership of the pi_state (via
pi_state->mutex). Probelm solved!
Though that does not work for the "WAITERS bit is stale" problem
because if lookup_pi_state() does not find existing pi_state it
returns -ERSCH (due to TID == 0) which causes futex_lock_pi() to
return -ESRCH to user space because the OWNER_DIED bit is not set.
Now there is a different solution to that problem. Do not look at the
user space value at all and enforce a lookup of possibly available
pi_state. If pi_state can be found, then the new incoming locker T3
blocks on that pi_state and legitimately races with T2 to acquire the
rt_mutex and the pi_state and therefor the proper ownership of the
user space futex.
lookup_pi_state() has the correct order of checks. It first tries to
find a pi_state associated with the user space futex and only if that
fails it checks for futex TID value = 0. If no pi_state is available
nothing can create new state at that point because this happens with
the hash bucket lock held.
So the above scenario changes to:
T1 lock_futex_pi(F);
T2 lock_futex_pi(F);
--> T2 blocks on the futex and creates pi_state which is associated
to T1.
T1 exits
--> exit_robust_list() runs
--> Futex F userspace value TID field is set to 0 and
FUTEX_OWNER_DIED bit is set.
T3 lock_futex_pi(F);
--> Finds pi_state and blocks on pi_state->rt_mutex
T1 --> exit_pi_state_list()
--> Transfers pi_state to waiter T2 and wakes it via
rt_mutex_unlock(&pi_state->mutex)
T2 --> acquires pi_state->mutex and gains ownership of the pi_state
--> Claims ownership of the futex and sets its own TID into the
userspace TID field of futex F
--> returns to user space
This covers all gazillion points on which T3 might come in between
T1's exit_robust_list() clearing the TID field and T2 fixing it up. It
also solves the "WAITERS bit stale" problem by forcing the take over.
Another benefit of changing the code this way is that it makes it less
dependent on untrusted user space values and therefor minimizes the
possible wreckage which might be inflicted.
As usual after staring for too long at the futex code my brain hurts
so much that I really want to ditch that whole optimization of
avoiding the syscall for the non contended case for PI futexes and rip
out the maze of corner case handling code. Unfortunately we can't as
user space relies on that existing behaviour, but at least thinking
about it helps me to preserve my mental sanity. Maybe we should
nevertheless :)
Reported-and-tested-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1210232138540.2756@ionos
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The functions defined in include/trace/syscalls.h are not used directly
since struct ftrace_event_class was introduced. Remove them from the
header file and rearrange the ftrace_event_class declarations in
trace_syscalls.c.
Link: http://lkml.kernel.org/r/1339112785-21806-2-git-send-email-vnagarnaik@google.com
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove ftrace_format_syscall() declaration; it is neither defined nor
used. Also update a comment and formatting.
Link: http://lkml.kernel.org/r/1339112785-21806-1-git-send-email-vnagarnaik@google.com
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Whenever an event is registered, the comm of tasks are saved at
every task switch instead of saving them at every event. But if
an event isn't executed much, the comm cache will be filled up
by tasks that did not record the event and you lose out on the comms
that did.
Here's an example, if you enable the following events:
echo 1 > /debug/tracing/events/kvm/kvm_cr/enable
echo 1 > /debug/tracing/events/net/net_dev_xmit/enable
Note, there's no kvm running on this machine so the first event will
never be triggered, but because it is enabled, the storing of comms
will continue. If we now disable the network event:
echo 0 > /debug/tracing/events/net/net_dev_xmit/enable
and look at the trace:
cat /debug/tracing/trace
sshd-2672 [001] ..s2 375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
sshd-2672 [001] ..s1 377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
sshd-2672 [001] ..s2 377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
sshd-2672 [001] ..s1 377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0
We see that process 2672 which triggered the events has the comm "sshd".
But if we run hackbench for a bit and look again:
cat /debug/tracing/trace
<...>-2672 [001] ..s2 375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
<...>-2672 [001] ..s1 377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
<...>-2672 [001] ..s2 377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
<...>-2672 [001] ..s1 377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0
The stored "sshd" comm has been flushed out and we get a useless "<...>".
But by only storing comms after a trace event occurred, we can run
hackbench all day and still get the same output.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functon tracing_sched_wakeup_trace() does an open coded unlock
commit and save stack. This is what the trace_nowake_buffer_unlock_commit()
is for.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If comm recording is not enabled when trace_printk() is used then
you just get this type of output:
[ adding trace_printk("hello! %d", irq); in do_IRQ ]
<...>-2843 [001] d.h. 80.812300: do_IRQ: hello! 14
<...>-2734 [002] d.h2 80.824664: do_IRQ: hello! 14
<...>-2713 [003] d.h. 80.829971: do_IRQ: hello! 14
<...>-2814 [000] d.h. 80.833026: do_IRQ: hello! 14
By enabling the comm recorder when trace_printk is enabled:
hackbench-6715 [001] d.h. 193.233776: do_IRQ: hello! 21
sshd-2659 [001] d.h. 193.665862: do_IRQ: hello! 21
<idle>-0 [001] d.h1 193.665996: do_IRQ: hello! 21
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since tracing is not used by 99% of Linux users, even though tracing
may be configured in, it does not make sense to allocate 1.4 Megs
per CPU for the ring buffers if they are not used. Thus, on boot up
the ring buffers are set to a minimal size until something needs the
and they are expanded.
This works well for events and tracers (function, etc), but for the
asynchronous use of trace_printk() which can write to the ring buffer
at any time, does not expand the buffers.
On boot up a check is made to see if any trace_printk() is used to
see if the trace_printk() temp buffer pages should be allocated. This
same code can be used to expand the buffers as well.
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The existing 'overrun' counter is incremented when the ring
buffer wraps around, with overflow on (the default). We wanted
a way to count requests lost from the buffer filling up with
overflow off, too. I decided to add a new counter instead
of retro-fitting the existing one because it seems like a
different statistic to count conceptually, and also because
of how the code was structured.
Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com
Signed-off-by: Slava Pestov <slavapestov@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
print_max and use_max_tr in struct tracer are "int" variables and
used like flags. This is wasteful, so change the type to "bool".
Link: http://lkml.kernel.org/r/20121002082710.9807.86393.stgit@falsita
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's times during debugging that it is helpful to see traces of early
boot functions. But the tracers are initialized at device_initcall()
which is quite late during the boot process. Setting the kernel command
line parameter ftrace=function will not show anything until the function
tracer is initialized. This prevents being able to trace functions before
device_initcall().
There's no reason that the tracers need to be initialized so late in the
boot process. Move them up to core_initcall() as they still need to come
after early_initcall() which initializes the tracing buffers.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Masaki found and patched a kallsyms issue: the last symbol in a
module's symtab wasn't transferred. This is because we manually copy
the zero'th entry (which is always empty) then copy the rest in a loop
starting at 1, though from src[0]. His fix was minimal, I prefer to
rewrite the loops in more standard form.
There are two loops: one to get the size, and one to copy. Make these
identical: always count entry 0 and any defined symbol in an allocated
non-init section.
This bug exists since the following commit was introduced.
module: reduce symbol table for loaded modules (v2)
commit: 4a4962263f
LKML: http://lkml.org/lkml/2012/10/24/27
Reported-by: Masaki Kimura <masaki.kimura.kz@hitachi.com>
Cc: stable@kernel.org
Due to these two commits:
8323f26ce3 sched: Fix race in task_group()
800d4d30c8 sched, autogroup: Stop going ahead if autogroup is disabled
... autogroup scheduling's dynamic knobs are wrecked.
With both patches applied, all you have to do to crash a box is
disable autogroup during boot up, then reboot.. boom, NULL pointer
dereference due to 800d4d30 not allowing autogroup to move things,
and 8323f26ce making that the only way to switch runqueues.
Remove most of the (dysfunctional) knobs and turn the remaining
sched_autogroup_enabled knob readonly.
If the user fiddles with cgroups hereafter, once tasks
are moved, autogroup won't mess with them again unless
they call setsid().
No knobs, no glitz, nada, just a cute little thing folks can
turn on if they don't want to muck about with cgroups and/or
systemd.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Xiaotian Feng <xtfeng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xiaotian Feng <dannyfeng@tencent.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org> # v3.6
Link: http://lkml.kernel.org/r/1351451963.4999.8.camel@maggy.simpson.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I've been trying to get hardware breakpoints with perf to work
on POWER7 but I'm getting the following:
% perf record -e mem:0x10000000 true
Error: sys_perf_event_open() syscall returned with 28 (No space left on device). /bin/dmesg may provide additional information.
Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?
true: Terminated
(FWIW adding -a and it works fine)
Debugging it seems that __reserve_bp_slot() is returning ENOSPC
because it thinks there are no free breakpoint slots on this
CPU.
I have a 2 CPUs, so perf userspace is doing two perf_event_open
syscalls to add a counter to each CPU [1]. The first syscall
succeeds but the second is failing.
On this second syscall, fetch_bp_busy_slots() sets slots.pinned
to be 1, despite there being no breakpoint on this CPU. This is
because the call the task_bp_pinned, checks all CPUs, rather
than just the current CPU. POWER7 only has one hardware
breakpoint per CPU (ie. HBP_NUM=1), so we return ENOSPC.
The following patch fixes this by checking the associated CPU
for each breakpoint in task_bp_pinned. I'm not familiar with
this code, so it's provided as a reference to the above issue.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Jovi Zhang <bookjovi@gmail.com>
Cc: K Prasad <prasad@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1351268936-2956-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
vtime_account() doesn't have the same role in
CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_IRQ_TIME_ACCOUNTING.
In the first case it handles time accounting in any context. In
the second case it only handles irq time accounting.
So when vtime_account() is called from outside vtime_account_irq_*()
this call is pointless to CONFIG_IRQ_TIME_ACCOUNTING.
To fix the confusion, change vtime_account() to irqtime_account_irq()
in CONFIG_IRQ_TIME_ACCOUNTING. This way we ensure future account_vtime()
calls won't waste useless cycles in the irqtime APIs.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
With CONFIG_VIRT_CPU_ACCOUNTING, when vtime_account()
is called in irq entry/exit, we perform a check on the
context: if we are interrupting the idle task we
account the pending cputime to idle, otherwise account
to system time or its sub-areas: tsk->stime, hardirq time,
softirq time, ...
However this check for idle only concerns the hardirq entry
and softirq entry:
* Hardirq may directly interrupt the idle task, in which case
we need to flush the pending CPU time to idle.
* The idle task may be directly interrupted by a softirq if
it calls local_bh_enable(). There is probably no such call
in any idle task but we need to cover every case. Ksoftirqd
is not concerned because the idle time is flushed on context
switch and softirq in the end of hardirq have the idle time
already flushed from the hardirq entry.
In the other cases we always account to system/irq time:
* On hardirq exit we account the time to hardirq time.
* On softirq exit we account the time to softirq time.
To optimize this and avoid the indirect call to vtime_account()
and the checks it performs, specialize the vtime irq APIs and
only perform the check on irq entry. Irq exit can directly call
vtime_account_system().
CONFIG_IRQ_TIME_ACCOUNTING behaviour doesn't change and directly
maps to its own vtime_account() implementation. One may want
to take benefits from the new APIs to optimize irq time accounting
as well in the future.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
vtime_account_system() currently has only one caller with
vtime_account() which is irq safe.
Now we are going to call it from other places like kvm where
irqs are not always disabled by the time we account the cputime.
So let's make it irqsafe. The arch implementation part is now
prefixed with "__".
vtime_account_idle() arch implementation is prefixed accordingly
to stay consistent.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Use DEFINE_STATIC_SRCU() to simplify the rcutorture.c SRCU test code.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
try_to_freeze_tasks() and cgroup_freezer rely on scheduler locks
to ensure that a task doing STOPPED/TRACED -> RUNNING transition
can't escape freezing. This mostly works, but ptrace_stop() does
not necessarily call schedule(), it can change task->state back to
RUNNING and check freezing() without any lock/barrier in between.
We could add the necessary barrier, but this patch changes
ptrace_stop() and do_signal_stop() to use freezable_schedule().
This fixes the race, freezer_count() and freezer_should_skip()
carefully avoid the race.
And this simplifies the code, try_to_freeze_tasks/update_if_frozen
no longer need to use task_is_stopped_or_traced() checks with the
non trivial assumptions. We can rely on the mechanism which was
specially designed to mark the sleeping task as "frozen enough".
v2: As Tejun pointed out, we can also change get_signal_to_deliver()
and move try_to_freeze() up before 'relock' label.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Merge misc fixes from Andrew Morton:
"18 total. 15 fixes and some updates to a device_cgroup patchset which
bring it up to date with the version which I should have merged in the
first place."
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (18 patches)
fs/compat_ioctl.c: VIDEO_SET_SPU_PALETTE missing error check
gen_init_cpio: avoid stack overflow when expanding
drivers/rtc/rtc-imxdi.c: add missing spin lock initialization
mm, numa: avoid setting zone_reclaim_mode unless a node is sufficiently distant
pidns: limit the nesting depth of pid namespaces
drivers/dma/dw_dmac: make driver's endianness configurable
mm/mmu_notifier: allocate mmu_notifier in advance
tools/testing/selftests/epoll/test_epoll.c: fix build
UAPI: fix tools/vm/page-types.c
mm/page_alloc.c:alloc_contig_range(): return early for err path
rbtree: include linux/compiler.h for definition of __always_inline
genalloc: stop crashing the system when destroying a pool
backlight: ili9320: add missing SPI dependency
device_cgroup: add proper checking when changing default behavior
device_cgroup: stop using simple_strtoul()
device_cgroup: rename deny_all to behavior
cgroup: fix invalid rcu dereference
mm: fix XFS oops due to dirty pages without buffers on s390
If one includes documentation for an external tool, it should be
correct. This is not:
1. Overriding the input to rngd should typically be neither
necessary nor desired. This is especially so since newer
versions of rngd support a number of different *types* of sources.
2. The default kernel-exported device is called /dev/hwrng not
/dev/hwrandom nor /dev/hw_random (both of which were used in the
past; however, kernel and udev seem to have converged on
/dev/hwrng.)
Overall it is better if the documentation for rngd is kept with rngd
rather than in a kernel Makefile.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'struct pid' is a "variable sized struct" - a header with an array of
upids at the end.
The size of the array depends on a level (depth) of pid namespaces. Now a
level of pidns is not limited, so 'struct pid' can be more than one page.
Looks reasonable, that it should be less than a page. MAX_PIS_NS_LEVEL is
not calculated from PAGE_SIZE, because in this case it depends on
architectures, config options and it will be reduced, if someone adds a
new fields in struct pid or struct upid.
I suggest to set MAX_PIS_NS_LEVEL = 32, because it saves ability to expand
"struct pid" and it's more than enough for all known for me use-cases.
When someone finds a reasonable use case, we can add a config option or a
sysctl parameter.
In addition it will reduce the effect of another problem, when we have
many nested namespaces and the oldest one starts dying.
zap_pid_ns_processe will be called for each namespace and find_vpid will
be called for each process in a namespace. find_vpid will be called
minimum max_level^2 / 2 times. The reason of that is that when we found a
bit in pidmap, we can't determine this pidns is top for this process or it
isn't.
vpid is a heavy operation, so a fork bomb, which create many nested
namespace, can make a system inaccessible for a long time. For example my
system becomes inaccessible for a few minutes with 4000 processes.
[akpm@linux-foundation.org: return -EINVAL in response to excessive nesting, not -ENOMEM]
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There don't have any 'r' prefix in uprobe event naming, remove it.
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Pull cgroup fixes from Tejun Heo:
"This pull request contains three fixes.
Two are reverts of task_lock() removal in cgroup fork path. The
optimizations incorrectly assumed that threadgroup_lock can protect
process forks (as opposed to thread creations) too. Further cleanup
of cgroup fork path is scheduled.
The third fixes cgroup emptiness notification loss."
* 'for-3.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
Revert "cgroup: Remove task_lock() from cgroup_post_fork()"
Revert "cgroup: Drop task_lock(parent) on cgroup_fork()"
cgroup: notify_on_release may not be triggered in some cases
Pull workqueue fix from Tejun Heo:
"This pull request contains one patch from Dan Magenheimer to fix
cancel_delayed_work() regression introduced by its reimplementation
using try_to_grab_pending(). The reimplementation made it incorrectly
return %true when the work item is idle.
There aren't too many consumers of the return value but it broke at
least ramster."
* 'for-3.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: cancel_delayed_work() should return %false if work item is idle
57b30ae77b ("workqueue: reimplement cancel_delayed_work() using
try_to_grab_pending()") made cancel_delayed_work() always return %true
unless someone else is also trying to cancel the work item, which is
broken - if the target work item is idle, the return value should be
%false.
try_to_grab_pending() indicates that the target work item was idle by
zero return value. Use it for return. Note that this brings
cancel_delayed_work() in line with __cancel_work_timer() in return
value handling.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <444a6439-b1a4-4740-9e7e-bc37267cfe73@default>
Not a big deal, but since other __get_key_name() callers
use it lets be consistent.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20121020190519.GH25467@moon
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While per-entity load-tracking is generally useful, beyond computing shares
distribution, e.g. runnable based load-balance (in progress), governors,
power-management, etc.
These facilities are not yet consumers of this data. This may be trivially
reverted when the information is required; but avoid paying the overhead for
calculations we will not use until then.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141507.422162369@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__update_entity_runnable_avg forms the core of maintaining an entity's runnable
load average. In this function we charge the accumulated run-time since last
update and handle appropriate decay. In some cases, e.g. a waking task, this
time interval may be much larger than our period unit.
Fortunately we can exploit some properties of our series to perform decay for a
blocked update in constant time and account the contribution for a running
update in essentially-constant* time.
[*]: For any running entity they should be performing updates at the tick which
gives us a soft limit of 1 jiffy between updates, and we can compute up to a
32 jiffy update in a single pass.
C program to generate the magic constants in the arrays:
#include <math.h>
#include <stdio.h>
#define N 32
#define WMULT_SHIFT 32
const long WMULT_CONST = ((1UL << N) - 1);
double y;
long runnable_avg_yN_inv[N];
void calc_mult_inv() {
int i;
double yn = 0;
printf("inverses\n");
for (i = 0; i < N; i++) {
yn = (double)WMULT_CONST * pow(y, i);
runnable_avg_yN_inv[i] = yn;
printf("%2d: 0x%8lx\n", i, runnable_avg_yN_inv[i]);
}
printf("\n");
}
long mult_inv(long c, int n) {
return (c * runnable_avg_yN_inv[n]) >> WMULT_SHIFT;
}
void calc_yn_sum(int n)
{
int i;
double sum = 0, sum_fl = 0, diff = 0;
/*
* We take the floored sum to ensure the sum of partial sums is never
* larger than the actual sum.
*/
printf("sum y^n\n");
printf(" %8s %8s %8s\n", "exact", "floor", "error");
for (i = 1; i <= n; i++) {
sum = (y * sum + y * 1024);
sum_fl = floor(y * sum_fl+ y * 1024);
printf("%2d: %8.0f %8.0f %8.0f\n", i, sum, sum_fl,
sum_fl - sum);
}
printf("\n");
}
void calc_conv(long n) {
long old_n;
int i = -1;
printf("convergence (LOAD_AVG_MAX, LOAD_AVG_MAX_N)\n");
do {
old_n = n;
n = mult_inv(n, 1) + 1024;
i++;
} while (n != old_n);
printf("%d> %ld\n", i - 1, n);
printf("\n");
}
void main() {
y = pow(0.5, 1/(double)N);
calc_mult_inv();
calc_conv(1024);
calc_yn_sum(N);
}
[ Compile with -lm ]
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141507.277808946@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that our measurement intervals are small (~1ms) we can amortize the posting
of update_shares() to be about each period overflow. This is a large cost
saving for frequently switching tasks.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141507.200772172@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that running entities maintain their own load-averages the work we must do
in update_shares() is largely restricted to the periodic decay of blocked
entities. This allows us to be a little less pessimistic regarding our
occupancy on rq->lock and the associated rq->clock updates required.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141507.133999170@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that the machinery in place is in place to compute contributed load in a
bottom up fashion; replace the shares distribution code within update_shares()
accordingly.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141507.061208672@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With bandwidth control tracked entities may cease execution according to user
specified bandwidth limits. Charging this time as either throttled or blocked
however, is incorrect and would falsely skew in either direction.
What we actually want is for any throttled periods to be "invisible" to
load-tracking as they are removed from the system for that interval and
contribute normally otherwise.
Do this by moderating the progression of time to omit any periods in which the
entity belonged to a throttled hierarchy.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141506.998912151@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Entities of equal weight should receive equitable distribution of cpu time.
This is challenging in the case of a task_group's shares as execution may be
occurring on multiple cpus simultaneously.
To handle this we divide up the shares into weights proportionate with the load
on each cfs_rq. This does not however, account for the fact that the sum of
the parts may be less than one cpu and so we need to normalize:
load(tg) = min(runnable_avg(tg), 1) * tg->shares
Where runnable_avg is the aggregate time in which the task_group had runnable
children.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141506.930124292@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Unlike task entities who have a fixed weight, group entities instead own a
fraction of their parenting task_group's shares as their contributed weight.
Compute this fraction so that we can correctly account hierarchies and shared
entity nodes.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141506.855074415@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Maintain a global running sum of the average load seen on each cfs_rq belonging
to each task group so that it may be used in calculating an appropriate
shares:weight distribution.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141506.792901086@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a running entity blocks we migrate its tracked load to
cfs_rq->blocked_runnable_avg. In the sleep case this occurs while holding
rq->lock and so is a natural transition. Wake-ups however, are potentially
asynchronous in the presence of migration and so special care must be taken.
We use an atomic counter to track such migrated load, taking care to match this
with the previously introduced decay counters so that we don't migrate too much
load.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141506.726077467@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since we are now doing bottom up load accumulation we need explicit
notification when a task has been re-parented so that the old hierarchy can be
updated.
Adds: migrate_task_rq(struct task_struct *p, int next_cpu)
(The alternative is to do this out of __set_task_cpu, but it was suggested that
this would be a cleaner encapsulation.)
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141506.660023400@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are currently maintaining:
runnable_load(cfs_rq) = \Sum task_load(t)
For all running children t of cfs_rq. While this can be naturally updated for
tasks in a runnable state (as they are scheduled); this does not account for
the load contributed by blocked task entities.
This can be solved by introducing a separate accounting for blocked load:
blocked_load(cfs_rq) = \Sum runnable(b) * weight(b)
Obviously we do not want to iterate over all blocked entities to account for
their decay, we instead observe that:
runnable_load(t) = \Sum p_i*y^i
and that to account for an additional idle period we only need to compute:
y*runnable_load(t).
This means that we can compute all blocked entities at once by evaluating:
blocked_load(cfs_rq)` = y * blocked_load(cfs_rq)
Finally we maintain a decay counter so that when a sleeping entity re-awakens
we can determine how much of its load should be removed from the blocked sum.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141506.585389902@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For a given task t, we can compute its contribution to load as:
task_load(t) = runnable_avg(t) * weight(t)
On a parenting cfs_rq we can then aggregate:
runnable_load(cfs_rq) = \Sum task_load(t), for all runnable children t
Maintain this bottom up, with task entities adding their contributed load to
the parenting cfs_rq sum. When a task entity's load changes we add the same
delta to the maintained sum.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141506.514678907@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since runqueues do not have a corresponding sched_entity we instead embed a
sched_avg structure directly.
Signed-off-by: Ben Segall <bsegall@google.com>
Reviewed-by: Paul Turner <pjt@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141506.442637130@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of tracking averaging the load parented by a cfs_rq, we can track
entity load directly. With the load for a given cfs_rq then being the sum
of its children.
To do this we represent the historical contribution to runnable average
within each trailing 1024us of execution as the coefficients of a
geometric series.
We can express this for a given task t as:
runnable_sum(t) = \Sum u_i * y^i, runnable_avg_period(t) = \Sum 1024 * y^i
load(t) = weight_t * runnable_sum(t) / runnable_avg_period(t)
Where: u_i is the usage in the last i`th 1024us period (approximately 1ms)
~ms and y is chosen such that y^k = 1/2. We currently choose k to be 32 which
roughly translates to about a sched period.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120823141506.372695337@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the comments of function tick_sched_timer(), the sentence
"timer->base->cpu_base->lock held" is not right.
In function __run_hrtimer(), before call timer->function(),
the cpu_base->lock has been unlocked.
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Cc: fei.li@intel.com
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351098455.15558.1421.camel@cliu38-desktop-build
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of BUG_ON(in_interrupt()), since that doesn't check for all
the newfangled stuff like preempt.
Note that this is valid since the console_sem is essentially used like
a real mutex with only two twists:
- we allow trylock from hardirq context
- across suspend/resume we lock the logical console_lock, but drop the
semaphore protecting the locking state.
Now that doesn't guarantee that no one is playing tricks in
single-thread atomic contexts at suspend/resume/boot time, but
- I couldn't find anything suspicious with some grepping,
- might_sleep shouldn't die,
- and I think the upside of catching more potential issues is worth
the risk of getting a might_sleep backtrace that would have been
save (and then dealing with that fallout).
Cc: Dave Airlie <airlied@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull perf fixes from Ingo Molnar:
"Most of these are uprobes race fixes from Oleg, and their preparatory
cleanups. (It's larger than what I'd normally send for an -rc kernel,
but they looked significant enough to not delay them.)
There's also an oprofile fix and an uncore PMU fix."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
perf/x86: Disable uncore on virtualized CPUs
oprofile, x86: Fix wrapping bug in op_x86_get_ctrl()
ring-buffer: Check for uninitialized cpu buffer before resizing
uprobes: Fix the racy uprobe->flags manipulation
uprobes: Fix prepare_uprobe() race with itself
uprobes: Introduce prepare_uprobe()
uprobes: Fix handle_swbp() vs unregister() + register() race
uprobes: Do not delete uprobe if uprobe_unregister() fails
uprobes: Don't return success if alloc_uprobe() fails
uprobes/x86: Only rep+nop can be emulated correctly
uprobes: Simplify is_swbp_at_addr(), remove stale comments
uprobes: Kill set_orig_insn()->is_swbp_at_addr()
uprobes: Introduce copy_opcode(), kill read_opcode()
uprobes: Kill set_swbp()->is_swbp_at_addr()
uprobes: Restrict valid_vma(false) to skip VM_SHARED vmas
uprobes: Change valid_vma() to demand VM_MAYEXEC rather than VM_EXEC
uprobes: Change write_opcode() to use FOLL_FORCE
uprobes: Move clear_thread_flag(TIF_UPROBE) to uprobe_notify_resume()
uprobes: Kill UTASK_BP_HIT state
uprobes: Fix UPROBE_SKIP_SSTEP checks in handle_swbp()
...
In theory, if a grace period manages to get started despite there being
no callbacks on any of the CPUs, all CPUs could go into dyntick-idle
mode, so that the grace period would never end. This commit updates
the RCU CPU stall warning messages to detect this condition by summing
up the number of callbacks on all CPUs.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit causes the last grace period started and completed to be
printed on RCU CPU stall warning messages in order to aid diagnosis.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The RCU CPU stall warnings rely on trigger_all_cpu_backtrace() to
do NMI-based dump of the stack traces of all CPUs. Unfortunately, a
number of architectures do not implement trigger_all_cpu_backtrace(), in
which case RCU falls back to just dumping the stack of the running CPU.
This is unhelpful in the case where the running CPU has detected that
some other CPU has stalled.
This commit therefore makes the running CPU dump the stacks of the
tasks running on the stalled CPUs.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because process_srcu() will be used in DEFINE_SRCU(), which is a macro
that could be expanded pretty much anywhere, it can no longer be static.
Note that process_srcu() is still internal to srcu.h.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Lai Jiangshan rewrote SRCU, so this commit ensures that he gets his
proper share of blame^Wcredit.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The fix introduced by a10d206e (rcu: Fix day-one dyntick-idle
stall-warning bug) has a C-language precedence error. It turns out
that this error is harmless in that the same result is computed for all
inputs, but the code is nevertheless a potential source of confusion.
This commit therefore introduces parentheses in order to force the
execution of the code to reflect the intent.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There have been some embedded applications that would benefit from
use of expedited grace-period primitives. In some ways, this is
similar to synchronize_net() doing either a normal or an expedited
grace period depending on lock state, but with control outside of
the kernel.
This commit therefore adds rcu_expedited boot and sysfs parameters
that cause the kernel to substitute expedited primitives for the
normal grace-period primitives.
[ paulmck: Add trace/event/rcu.h to kernel/srcu.c to avoid build error.
Get rid of infinite loop through contention path.]
Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It's only there to call rcu_user_hooks_switch(). Let's
just call rcu_user_hooks_switch() directly, we don't need this
function in the middle.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit causes rcutorture to print the errno if cpu_down() fails
when the rcutorture "verbose" module parameter is specified.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In the old days, _rcu_barrier() acquired ->onofflock to exclude
rcu_send_cbs_to_orphanage(), which allowed the latter to avoid memory
barriers in callback handling. However, _rcu_barrier() recently started
doing get_online_cpus() to lock out CPU-hotplug operations entirely, which
means that the comment in rcu_send_cbs_to_orphanage() that talks about
->onofflock is now obsolete. This commit therefore fixes the comment.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Dave Airlie recently discovered a locking bug in the fbcon layer,
where a timer_del_sync (for the blinking cursor) deadlocks with the
timer itself, since both (want to) hold the console_lock:
https://lkml.org/lkml/2012/8/21/36
Unfortunately the console_lock isn't a plain mutex and hence has no
lockdep support. Which resulted in a few days wasted of tracking down
this bug (complicated by the fact that printk doesn't show anything
when the console is locked) instead of noticing the bug much earlier
with the lockdep splat.
Hence I've figured I need to fix that for the next deadlock involving
console_lock - and with kms/drm growing ever more complex locking
that'll eventually happen.
Now the console_lock has rather funky semantics, so after a quick irc
discussion with Thomas Gleixner and Dave Airlie I've quickly ditched
the original idead of switching to a real mutex (since it won't work)
and instead opted to annotate the console_lock with lockdep
information manually.
There are a few special cases:
- The console_lock state is protected by the console_sem, and usually
grabbed/dropped at _lock/_unlock time. But the suspend/resume code
drops the semaphore without dropping the console_lock (see
suspend_console/resume_console). But since the same thread that did
the suspend will do the resume, we don't need to fix up anything.
- In the printk code there's a special trylock, only used to kick off
the logbuffer printk'ing in console_unlock. But all that happens
while lockdep is disable (since printk does a few other evil
tricks). So no issue there, either.
- The console_lock can also be acquired form irq context (but only
with a trylock). lockdep already handles that.
This all leaves us with annotating the normal console_lock, _unlock
and _trylock functions.
And yes, it works - simply unloading a drm kms driver resulted in
lockdep complaining about the deadlock in fbcon_deinit:
======================================================
[ INFO: possible circular locking dependency detected ]
3.6.0-rc2+ #552 Not tainted
-------------------------------------------------------
kms-reload/3577 is trying to acquire lock:
((&info->queue)){+.+...}, at: [<ffffffff81058c70>] wait_on_work+0x0/0xa7
but task is already holding lock:
(console_lock){+.+.+.}, at: [<ffffffff81264686>] bind_con_driver+0x38/0x263
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (console_lock){+.+.+.}:
[<ffffffff81087440>] lock_acquire+0x95/0x105
[<ffffffff81040190>] console_lock+0x59/0x5b
[<ffffffff81209cb6>] fb_flashcursor+0x2e/0x12c
[<ffffffff81057c3e>] process_one_work+0x1d9/0x3b4
[<ffffffff810584a2>] worker_thread+0x1a7/0x24b
[<ffffffff8105ca29>] kthread+0x7f/0x87
[<ffffffff813b1204>] kernel_thread_helper+0x4/0x10
-> #0 ((&info->queue)){+.+...}:
[<ffffffff81086cb3>] __lock_acquire+0x999/0xcf6
[<ffffffff81087440>] lock_acquire+0x95/0x105
[<ffffffff81058cab>] wait_on_work+0x3b/0xa7
[<ffffffff81058dd6>] __cancel_work_timer+0xbf/0x102
[<ffffffff81058e33>] cancel_work_sync+0xb/0xd
[<ffffffff8120a3b3>] fbcon_deinit+0x11c/0x1dc
[<ffffffff81264793>] bind_con_driver+0x145/0x263
[<ffffffff81264a45>] unbind_con_driver+0x14f/0x195
[<ffffffff8126540c>] store_bind+0x1ad/0x1c1
[<ffffffff8127cbb7>] dev_attr_store+0x13/0x1f
[<ffffffff8116d884>] sysfs_write_file+0xe9/0x121
[<ffffffff811145b2>] vfs_write+0x9b/0xfd
[<ffffffff811147b7>] sys_write+0x3e/0x6b
[<ffffffff813b0039>] system_call_fastpath+0x16/0x1b
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(console_lock);
lock((&info->queue));
lock(console_lock);
lock((&info->queue));
*** DEADLOCK ***
v2: Mark the lockdep_map static, noticed by Jani Nikula.
Cc: Dave Airlie <airlied@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce struct pm_qos_flags_request and struct pm_qos_flags
representing PM QoS flags request type and PM QoS flags constraint
type, respectively. With these definitions the data structures
will be arranged so that the list member of a struct pm_qos_flags
object will contain the head of a list of struct pm_qos_flags_request
objects representing all of the "flags" requests present for the
given device. Then, the effective_flags member of a struct
pm_qos_flags object will contain the bitwise OR of the flags members
of all the struct pm_qos_flags_request objects in the list.
Additionally, introduce helper function pm_qos_update_flags()
allowing the caller to manage the list of struct pm_qos_flags_request
pointed to by the list member of struct pm_qos_flags.
The flags are of type s32 so that the request's "value" field
is always of the same type regardless of what kind of request it
is (latency requests already have value fields of type s32).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Acked-by: mark gross <markgross@thegnar.org>
Fix the warning:
kernel/module_signing.c:195:2: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t'
by using the proper 'z' modifier for printing a size_t.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
freezer_read/write() used cgroup_lock_live_group() to synchronize
against task migration into and out of the target cgroup.
cgroup_lock_live_group() grabs the internal cgroup lock and using it
from outside cgroup core leads to complex and fragile locking
dependency issues which are difficult to resolve.
Now that freezer_can_attach() is replaced with freezer_attach() and
update_if_frozen() updated, nothing requires excluding migration
against freezer state reads and changes.
This patch removes cgroup_lock_live_group() and the matching
cgroup_unlock() usages. The prone-to-bitrot, already outdated and
unnecessary global lock hierarchy documentation is replaced with
documentation in local scope.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Li Zefan <lizefan@huawei.com>
Locking will change such that migration can happen while
freezer_read/write() is in progress. This means that
update_if_frozen() can no longer assume that all tasks in the cgroup
coform to the current freezer state - newly migrated tasks which
haven't finished freezer_attach() yet might be in any state.
This patch updates update_if_frozen() such that it no longer verifies
task states against freezer state. It now simply decides whether
FREEZING stage is complete.
This removal of verification makes it meaningless to call from
freezer_change_state(). Drop it and move the fast exit test from
freezer_read() - the only left caller - to update_if_frozen().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Li Zefan <lizefan@huawei.com>
cgroup_freezer is one of the few users of cgroup_subsys->can_attach()
and uses it to prevent tasks from being migrated into or out of a
frozen cgroup. This makes cgroup_freezer cumbersome to use especially
when co-mounted with other controllers.
->can_attach() is problematic in general as it can make co-mounting
multiple cgroups difficult - migrating tasks may fail for reasons
completely irrelevant for other controllers. freezer_can_attach() in
particular is more problematic because it messes with cgroup internal
locking to ensure that the state verification performed at
freezer_can_attach() stays valid until migration is complete.
This patch replaces freezer_can_attach() with freezer_attach() so that
tasks are always allowed to migrate - they are nudged into the
conforming state from freezer_attach(). This means that there can be
tasks which are being migrated which don't conform to the current
cgroup_freezer state until freezer_attach() is complete. Under the
current locking scheme, the only such place is freezer_fork() which is
updated to handle such window.
While this patch doesn't remove the use of internal cgroup locking
from freezer_read/write() paths, it removes the requirement to keep
the freezer state constant while migrating and enables such change.
Note that this creates a userland visible behavior change - FROZEN
cgroup can no longer be used to lock migrations in and out of the
cgroup. This behavior change is intended. I don't think the feature
is necessary - userland should coordinate accesses to cgroup fs anyway
- and even if the feature is needed cgroup_freezer is the completely
wrong place to implement it.
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <1350426526-14254-1-git-send-email-tj@kernel.org>
Cc: Matt Helsley <matthltc@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Li Zefan <lizefan@huawei.com>
Because grace-period initialization is carried out by a separate
kthread, it might happen on a different CPU than the one that
had the callback needing a grace period -- which is where the
callback acceleration needs to happen.
Fortunately, rcu_start_gp() holds the root rcu_node structure's
->lock, which prevents a new grace period from starting. This
allows this function to safely determine that a grace period has
not yet started, which in turn allows it to fully accelerate any
callbacks that it has pending. This commit adds this acceleration.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The min/max call needed to have explicit types on some architectures
(e.g. mn10300). Use clamp_t instead to avoid the warning:
kernel/sys.c: In function 'override_release':
kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default]
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Emit the magic string that indicates a module has a signature after the
signature data instead of before it. This allows module_sig_check() to
be made simpler and faster by the elimination of the search for the
magic string. Instead we just need to do a single memcmp().
This works because at the end of the signature data there is the
fixed-length signature information block. This block then falls
immediately prior to the magic number.
From the contents of the information block, it is trivial to calculate
the size of the signature data and thus the size of the actual module
data.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 7e3aa30ac8.
The commit incorrectly assumed that fork path always performed
threadgroup_change_begin/end() and depended on that for
synchronization against task exit and cgroup migration paths instead
of explicitly grabbing task_lock().
threadgroup_change is not locked when forking a new process (as
opposed to a new thread in the same process) and even if it were it
wouldn't be effective as different processes use different threadgroup
locks.
Revert the incorrect optimization.
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <20121008020000.GB2575@localhost>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org
This reverts commit 7e381b0eb1.
The commit incorrectly assumed that fork path always performed
threadgroup_change_begin/end() and depended on that for
synchronization against task exit and cgroup migration paths instead
of explicitly grabbing task_lock().
threadgroup_change is not locked when forking a new process (as
opposed to a new thread in the same process) and even if it were it
wouldn't be effective as different processes use different threadgroup
locks.
Revert the incorrect optimization.
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <20121008020000.GB2575@localhost>
Acked-by: Li Zefan <lizefan@huawei.com>
Bitterly-Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org
free_pid_ns() operates in a recursive fashion:
free_pid_ns(parent)
put_pid_ns(parent)
kref_put(&ns->kref, free_pid_ns);
free_pid_ns
thus if there was a huge nesting of namespaces the userspace may trigger
avalanche calling of free_pid_ns leading to kernel stack exhausting and a
panic eventually.
This patch turns the recursion into an iterative loop.
Based on a patch by Andrew Vagin.
[akpm@linux-foundation.org: export put_pid_ns() to modules]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Calling uname() with the UNAME26 personality set allows a leak of kernel
stack contents. This fixes it by defensively calculating the length of
copy_to_user() call, making the len argument unsigned, and initializing
the stack buffer to zero (now technically unneeded, but hey, overkill).
CVE-2012-0957
Reported-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The console_cpu_notify() function runs with interrupts disabled in the
CPU_DYING case. It therefore cannot block, for example, as will happen
when it calls console_lock(). Therefore, remove the CPU_DYING leg of
the switch statement to avoid this problem.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
notify_on_release must be triggered when the last process in a cgroup is
move to another. But if the first(and only) process in a cgroup is moved to
another, notify_on_release is not triggered.
# mkdir /cgroup/cpu/SRC
# mkdir /cgroup/cpu/DST
#
# echo 1 >/cgroup/cpu/SRC/notify_on_release
# echo 1 >/cgroup/cpu/DST/notify_on_release
#
# sleep 300 &
[1] 8629
#
# echo 8629 >/cgroup/cpu/SRC/tasks
# echo 8629 >/cgroup/cpu/DST/tasks
-> notify_on_release for /SRC must be triggered at this point,
but it isn't.
This is because put_css_set() is called before setting CGRP_RELEASABLE
in cgroup_task_migrate(), and is a regression introduce by the
commit:74a1166d(cgroups: make procs file writable), which was merged
into v3.0.
Cc: Ben Blum <bblum@andrew.cmu.edu>
Cc: <stable@vger.kernel.org> # v3.0.x and later
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_freezer doesn't transition from FREEZING to FROZEN if the
cgroup contains PF_NOFREEZE tasks or tasks sleeping with
PF_FREEZER_SKIP set.
Only kernel tasks can be non-freezable (PF_NOFREEZE) and there's
nothing cgroup_freezer or userland can do about or to it. It's
pointless to stall the transition for PF_NOFREEZE tasks.
PF_FREEZER_SKIP indicates that the task can be skipped when
determining whether frozen state is reached. A task with
PF_FREEZER_SKIP is guaranteed to perform try_to_freeze() after it
wakes up and can be considered frozen much like stopped or traced
tasks. Note that a vfork parent uses PF_FREEZER_SKIP while waiting
for the child.
This updates update_if_frozen() such that it only considers freezable
tasks and treats %true freezer_should_skip() tasks as frozen.
This allows cgroups w/ kthreads and vfork parents successfully reach
FROZEN state.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
try_to_freeze_cgroup() has condition checks which are intended to fail
the write operation to freezer.state if there are tasks which can't be
frozen. The condition checks have been broken for quite some time
now. freeze_task() returns %false if the target task can't be frozen,
so num_cant_freeze_now is never incremented.
In addition, strangely, cgroup freezing proceeds even after the write
is failed, which is rather broken.
This patch rips out the non-working code intended to fail the write to
freezer.state when the cgroup contains non-freezable tasks and makes
it official that writes to freezer.state succeed whether there are
non-freezable tasks in the cgroup or not.
This leaves is_task_frozen_enough() with only one user -
upste_if_frozen(). Collapse it into the caller. Note that this
removes an extra call to freezing().
This doesn't cause any userland behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
cgroup core has a bug which violates a basic rule about event
notifications - when a new entity needs to be added, you add that to
the notification list first and then make the new entity conform to
the current state. If done in the reverse order, an event happening
inbetween will be lost.
cgroup_subsys->fork() is invoked way before the new task is added to
the css_set. Currently, cgroup_freezer is the only user of ->fork()
and uses it to make new tasks conform to the current state of the
freezer. If FROZEN state is requested while fork is in progress
between cgroup_fork_callbacks() and cgroup_post_fork(), the child
could escape freezing - the cgroup isn't frozen when ->fork() is
called and the freezer couldn't see the new task on the css_set.
This patch moves cgroup_subsys->fork() invocation to
cgroup_post_fork() after the new task is added to the css_set.
cgroup_fork_callbacks() is removed.
Because now a task may be migrated during cgroup_subsys->fork(),
freezer_fork() is updated so that it adheres to the usual RCU locking
and the rather pointless comment on why locking can be different there
is removed (if it doesn't make anything simpler, why even bother?).
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@vger.kernel.org
As per the recent discussion with Mike and Linus, make it easier to
test with/without this feature. No change in default behavior.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-izoxq4haeg4mTognnDbwcevt@git.kernel.org
This optimize a bit the high res tick sched handler.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Besides unifying code, this also adds the idle check before
processing idle accounting specifics on the low res handler.
This way we also generalize this part of the nohz code for
!CONFIG_HIGH_RES_TIMERS to prepare for the adaptive tickless
features.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Unify the duplicated timekeeping handling code of low and high res tick
sched handlers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Pull module signing support from Rusty Russell:
"module signing is the highlight, but it's an all-over David Howells frenzy..."
Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG.
* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits)
X.509: Fix indefinite length element skip error handling
X.509: Convert some printk calls to pr_devel
asymmetric keys: fix printk format warning
MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
MODSIGN: Make mrproper should remove generated files.
MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs
MODSIGN: Use the same digest for the autogen key sig as for the module sig
MODSIGN: Sign modules during the build process
MODSIGN: Provide a script for generating a key ID from an X.509 cert
MODSIGN: Implement module signature checking
MODSIGN: Provide module signing public keys to the kernel
MODSIGN: Automatically generate module signing keys if missing
MODSIGN: Provide Kconfig options
MODSIGN: Provide gitignore and make clean rules for extra files
MODSIGN: Add FIPS policy
module: signature checking hook
X.509: Add a crypto key parser for binary (DER) X.509 certificates
MPILIB: Provide a function to read raw data into an MPI
X.509: Add an ASN.1 decoder
X.509: Add simple ASN.1 grammar compiler
...
Cleanups
Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c
Add module event hooks for simplified debugging with gdb
Fixes
Fix kdb to stop paging with 'q' on bta and dmesg
Fix for data that scrolls off the vga console due to line wrapping
when using the kdb pager
New
The debug core registers for kernel module events which allows a
kernel aware gdb to automatically load symbols and break on entry
to a kernel module
Allow kgdboc=kdb to setup kdb on the vga console
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=uf0L
-----END PGP SIGNATURE-----
Merge tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb
Pull KGDB/KDB fixes and cleanups from Jason Wessel:
"Cleanups
- Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c
- Add module event hooks for simplified debugging with gdb
Fixes
- Fix kdb to stop paging with 'q' on bta and dmesg
- Fix for data that scrolls off the vga console due to line wrapping
when using the kdb pager
New
- The debug core registers for kernel module events which allows a
kernel aware gdb to automatically load symbols and break on entry
to a kernel module
- Allow kgdboc=kdb to setup kdb on the vga console"
* tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
tty/console: fix warnings in drivers/tty/serial/kgdboc.c
kdb,vt_console: Fix missed data due to pager overruns
kdb: Fix dmesg/bta scroll to quit with 'q'
kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell
kgdb,x86: fix warning about unused variable
mips,kgdb: fix recursive page fault with CONFIG_KPROBES
kgdb: Add module event hooks
Pull perf updates from Ingo Molnar:
"This tree includes some late late perf items that missed the first
round:
tools:
- Bash auto completion improvements, now we can auto complete the
tools long options, tracepoint event names, etc, from Namhyung Kim.
- Look up thread using tid instead of pid in 'perf sched'.
- Move global variables into a perf_kvm struct, from David Ahern.
- Hists refactorings, preparatory for improved 'diff' command, from
Jiri Olsa.
- Hists refactorings, preparatory for event group viewieng work, from
Namhyung Kim.
- Remove double negation on optional feature macro definitions, from
Namhyung Kim.
- Remove several cases of needless global variables, on most
builtins.
- misc fixes
kernel:
- sysfs support for IBS on AMD CPUs, from Robert Richter.
- Support for an upcoming Intel CPU, the Xeon-Phi / Knights Corner
HPC blade PMU, from Vince Weaver.
- misc fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
perf: Fix perf_cgroup_switch for sw-events
perf: Clarify perf_cpu_context::active_pmu usage by renaming it to ::unique_pmu
perf/AMD/IBS: Add sysfs support
perf hists: Add more helpers for hist entry stat
perf hists: Move he->stat.nr_events initialization to a template
perf hists: Introduce struct he_stat
perf diff: Removing the total_period argument from output code
perf tool: Add hpp interface to enable/disable hpp column
perf tools: Removing hists pair argument from output path
perf hists: Separate overhead and baseline columns
perf diff: Refactor diff displacement possition info
perf hists: Add struct hists pointer to struct hist_entry
perf tools: Complete tracepoint event names
perf/x86: Add support for Intel Xeon-Phi Knights Corner PMU
perf evlist: Remove some unused methods
perf evlist: Introduce add_newtp method
perf kvm: Move global variables into a perf_kvm struct
perf tools: Convert to BACKTRACE_SUPPORT
perf tools: Long option completion support for each subcommands
perf tools: Complete long option names of perf command
...
Pull third pile of kernel_execve() patches from Al Viro:
"The last bits of infrastructure for kernel_thread() et.al., with
alpha/arm/x86 use of those. Plus sanitizing the asm glue and
do_notify_resume() on alpha, fixing the "disabled irq while running
task_work stuff" breakage there.
At that point the rest of kernel_thread/kernel_execve/sys_execve work
can be done independently for different architectures. The only
pending bits that do depend on having all architectures converted are
restrictred to fs/* and kernel/* - that'll obviously have to wait for
the next cycle.
I thought we'd have to wait for all of them done before we start
eliminating the longjump-style insanity in kernel_execve(), but it
turned out there's a very simple way to do that without flagday-style
changes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
alpha: switch to saner kernel_execve() semantics
arm: switch to saner kernel_execve() semantics
x86, um: convert to saner kernel_execve() semantics
infrastructure for saner ret_from_kernel_thread semantics
make sure that kernel_thread() callbacks call do_exit() themselves
make sure that we always have a return path from kernel_execve()
ppc: eeh_event should just use kthread_run()
don't bother with kernel_thread/kernel_execve for launching linuxrc
alpha: get rid of switch_stack argument of do_work_pending()
alpha: don't bother passing switch_stack separately from regs
alpha: take SIGPENDING/NOTIFY_RESUME loop into signal.c
alpha: simplify TIF_NEED_RESCHED handling
Pull third pile of VFS updates from Al Viro:
"Stuff from Jeff Layton, mostly. Sanitizing interplay between audit
and namei, removing a lot of insanity from audit_inode() mess and
getting things ready for his ESTALE patchset."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
procfs: don't need a PATH_MAX allocation to hold a string representation of an int
vfs: embed struct filename inside of names_cache allocation if possible
audit: make audit_inode take struct filename
vfs: make path_openat take a struct filename pointer
vfs: turn do_path_lookup into wrapper around struct filename variant
audit: allow audit code to satisfy getname requests from its names_list
vfs: define struct filename and have getname() return it
vfs: unexport getname and putname symbols
acct: constify the name arg to acct_on
vfs: allocate page instead of names_cache buffer in mount_block_root
audit: overhaul __audit_inode_child to accomodate retrying
audit: optimize audit_compare_dname_path
audit: make audit_compare_dname_path use parent_len helper
audit: remove dirlen argument to audit_compare_dname_path
audit: set the name_len in audit_inode for parent lookups
audit: add a new "type" field to audit_names struct
audit: reverse arguments to audit_inode_child
audit: no need to walk list in audit_inode if name is NULL
audit: pass in dentry to audit_copy_inode wherever possible
audit: remove unnecessary NULL ptr checks from do_path_lookup
Keep a pointer to the audit_names "slot" in struct filename.
Have all of the audit_inode callers pass a struct filename ponter to
audit_inode instead of a string pointer. If the aname field is already
populated, then we can skip walking the list altogether and just use it
directly.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
...and fix up the callers. For do_file_open_root, just declare a
struct filename on the stack and fill out the .name field. For
do_filp_open, make it also take a struct filename pointer, and fix up its
callers to call it appropriately.
For filp_open, add a variant that takes a struct filename pointer and turn
filp_open into a wrapper around it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently, if we call getname() on a userland string more than once,
we'll get multiple copies of the string and multiple audit_names
records.
Add a function that will allow the audit_names code to satisfy getname
requests using info from the audit_names list, avoiding a new allocation
and audit_names records.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
getname() is intended to copy pathname strings from userspace into a
kernel buffer. The result is just a string in kernel space. It would
however be quite helpful to be able to attach some ancillary info to
the string.
For instance, we could attach some audit-related info to reduce the
amount of audit-related processing needed. When auditing is enabled,
we could also call getname() on the string more than once and not
need to recopy it from userspace.
This patchset converts the getname()/putname() interfaces to return
a struct instead of a string. For now, the struct just tracks the
string in kernel space and the original userland pointer for it.
Later, we'll add other information to the struct as it becomes
convenient.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* allow kernel_execve() leave the actual return to userland to
caller (selected by CONFIG_GENERIC_KERNEL_EXECVE). Callers
updated accordingly.
* architecture that does select GENERIC_KERNEL_EXECVE in its
Kconfig should have its ret_from_kernel_thread() do this:
call schedule_tail
call the callback left for it by copy_thread(); if it ever
returns, that's because it has just done successful kernel_execve()
jump to return from syscall
IOW, its only difference from ret_from_fork() is that it does call the
callback.
* such an architecture should also get rid of ret_from_kernel_execve()
and __ARCH_WANT_KERNEL_EXECVE
This is the last part of infrastructure patches in that area - from
that point on work on different architectures can live independently.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull timer core update from Thomas Gleixner:
- Bug fixes (one for a longstanding dead loop issue)
- Rework of time related vsyscalls
- Alarm timer updates
- Jiffies updates to remove compile time dependencies
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Cast raw_interval to u64 to avoid shift overflow
timers: Fix endless looping between cascade() and internal_add_timer()
time/jiffies: bring back unconditional LATCH definition
time: Convert x86_64 to using new update_vsyscall
time: Only do nanosecond rounding on GENERIC_TIME_VSYSCALL_OLD systems
time: Introduce new GENERIC_TIME_VSYSCALL
time: Convert CONFIG_GENERIC_TIME_VSYSCALL to CONFIG_GENERIC_TIME_VSYSCALL_OLD
time: Move update_vsyscall definitions to timekeeper_internal.h
time: Move timekeeper structure to timekeeper_internal.h for vsyscall changes
jiffies: Remove compile time assumptions about CLOCK_TICK_RATE
jiffies: Kill unused TICK_USEC_TO_NSEC
alarmtimer: Rename alarmtimer_remove to alarmtimer_dequeue
alarmtimer: Remove unused helpers & defines
alarmtimer: Use hrtimer per-alarm instead of per-base
alarmtimer: Implement minimum alarm interval for allowing suspend
Pull scheduler fixes from Ingo Molnar:
"A CPU hotplug related crash fix and a nohz accounting fixlet."
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Update sched_domains_numa_masks[][] when new cpus are onlined
sched: Ensure 'sched_domains_numa_levels' is safe to use in other functions
nohz: Fix one jiffy count too far in idle cputime
Pull RCU fixes from Ingo Molnar:
"This tree includes a shutdown/cpu-hotplug deadlock fix and a
documentation fix."
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Advise most users not to enable RCU user mode
rcu: Grace-period initialization excludes only RCU notifier
It is possible to miss data when using the kdb pager. The kdb pager
does not pay attention to the maximum column constraint of the screen
or serial terminal. This result is not incrementing the shown lines
correctly and the pager will print more lines that fit on the screen.
Obviously that is less than useful when using a VGA console where you
cannot scroll back.
The pager will now look at the kdb_buffer string to see how many
characters are printed. It might not be perfect considering you can
output ASCII that might move the cursor position, but it is a
substantially better approximation for viewing dmesg and trace logs.
This also means that the vt screen needs to set the kdb COLUMNS
variable.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
If you press 'q' the pager should exit instead of printing everything
from dmesg which can really bog down a 9600 baud serial link.
The same is true for the bta command.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Allow gdb to auto load kernel modules when it is attached,
which makes it trivially easy to debug module init functions
or pre-set breakpoints in a kernel module that has not loaded yet.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
In order to accomodate retrying path-based syscalls, we need to add a
new "type" argument to audit_inode_child. This will tell us whether
we're looking for a child entry that represents a create or a delete.
If we find a parent, don't automatically assume that we need to create a
new entry. Instead, use the information we have to try to find an
existing entry first. Update it if one is found and create a new one if
not.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In the cases where we already know the length of the parent, pass it as
a parm so we don't need to recompute it. In the cases where we don't
know the length, pass in AUDIT_NAME_FULL (-1) to indicate that it should
be determined.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently, this gets set mostly by happenstance when we call into
audit_inode_child. While that might be a little more efficient, it seems
wrong. If the syscall ends up failing before audit_inode_child ever gets
called, then you'll have an audit_names record that shows the full path
but has the parent inode info attached.
Fix this by passing in a parent flag when we call audit_inode that gets
set to the value of LOOKUP_PARENT. We can then fix up the pathname for
the audit entry correctly from the get-go.
While we're at it, clean up the no-op macro for audit_inode in the
!CONFIG_AUDITSYSCALL case.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For now, we just have two possibilities:
UNKNOWN: for a new audit_names record that we don't know anything about yet
NORMAL: for everything else
In later patches, we'll add other types so we can distinguish and update
records created under different circumstances.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most of the callers get called with an inode and dentry in the reverse
order. The compiler then has to reshuffle the arg registers and/or
stack in order to pass them on to audit_inode_child.
Reverse those arguments for a micro-optimization.
Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If name is NULL then the condition in the loop will never be true. Also,
with this change, we can eliminate the check for n->name == NULL since
the equivalence check will never be true if it is.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In some cases, we were passing in NULL even when we have a dentry.
Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Complement the Nomadik pinctrl driver with alternate Cx functions
so it handles all oddities.
- A patch to the IRQdomain to reform the simple irqdomain to handle
IRQ descriptor allocation dynamically.
- Use the above feature in the Nomadik pin controller.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=UKY/
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-for-3.7-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull second set of pinctrl patches from Linus Walleij:
"Here is a late pinctrl pull request with stuff that wasn't quite
tested at the first pull request.
The main reason to not hold off is that the modifications to
irq_domain_add_simple() as reviewed by Rob Herring introduce new
infrastructure for irqdomains that will be useful for the next cycle:
instead of sprinkling irq descriptor allocation all over the kernel
wherever a "legacy" domain is registered, which is necessary for any
platform using sparse IRQs, and many irq chips are say GPIO
controllers which may be used with several systems, some with sparse
IRQs some not, we push this into the irq_domain_add_simple() so we can
atleast do mistakes in one place.
The irq_domain_add_simple() is currently unused in the kernel, so I
need to provide a user. The Nomadik stuff that goes with are changes
to the driver I use day-to-day to make use of this facility (and a
dependency), so see it as a way to eat my own dogfood: if this blows
up the egg hits my face.
A second round of pinctrl patches for v3.7:
- Complement the Nomadik pinctrl driver with alternate Cx functions
so it handles all oddities.
- A patch to the IRQdomain to reform the simple irqdomain to handle
IRQ descriptor allocation dynamically.
- Use the above feature in the Nomadik pin controller."
* tag 'pinctrl-for-3.7-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl/nomadik: use simple or linear IRQ domain
irqdomain: augment add_simple() to allocate descs
pinctrl/nomadik: support other alternate-C functions
Pull pile 2 of vfs updates from Al Viro:
"Stuff in this one - assorted fixes, lglock tidy-up, death to
lock_super().
There'll be a VFS pile tomorrow (with patches from Jeff Layton,
sanitizing getname() and related parts of audit and preparing for
ESTALE fixes), but I'd rather push the stuff in this one ASAP - some
of the bugs closed here are quite unpleasant."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: bogus warnings in fs/namei.c
consitify do_mount() arguments
lglock: add DEFINE_STATIC_LGLOCK()
lglock: make the per_cpu locks static
lglock: remove unused DEFINE_LGLOCK_LOCKDEP()
MAX_LFS_FILESIZE definition for 64bit needs LL...
tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking
vfs: drop lock/unlock super
ufs: drop lock/unlock super
sysv: drop lock/unlock super
hpfs: drop lock/unlock super
fat: drop lock/unlock super
ext3: drop lock/unlock super
exofs: drop lock/unlock super
dup3: Return an error when oldfd == newfd.
fs: handle failed audit_log_start properly
fs: prevent use after free in auditing when symlink following was denied
Pull pile 2 of execve and kernel_thread unification work from Al Viro:
"Stuff in there: kernel_thread/kernel_execve/sys_execve conversions for
several more architectures plus assorted signal fixes and cleanups.
There'll be more (in particular, real fixes for the alpha
do_notify_resume() irq mess)..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (43 commits)
alpha: don't open-code trace_report_syscall_{enter,exit}
Uninclude linux/freezer.h
m32r: trim masks
avr32: trim masks
tile: don't bother with SIGTRAP in setup_frame
microblaze: don't bother with SIGTRAP in setup_rt_frame()
mn10300: don't bother with SIGTRAP in setup_frame()
frv: no need to raise SIGTRAP in setup_frame()
x86: get rid of duplicate code in case of CONFIG_VM86
unicore32: remove pointless test
h8300: trim _TIF_WORK_MASK
parisc: decide whether to go to slow path (tracesys) based on thread flags
parisc: don't bother looping in do_signal()
parisc: fix double restarts
bury the rest of TIF_IRET
sanitize tsk_is_polling()
bury _TIF_RESTORE_SIGMASK
unicore32: unobfuscate _TIF_WORK_MASK
mips: NOTIFY_RESUME is not needed in TIF masks
mips: merge the identical "return from syscall" per-ABI code
...
Conflicts:
arch/arm/include/asm/thread_info.h
Most of them never returned anyway - only two functions had to be
changed. That allows to simplify their callers a whole lot.
Note that this does *not* apply to kthread_run() callbacks - all of
those had been called from the same kernel_thread() callback, which
did do_exit() already. This is strictly about very few low-level
kernel_thread() callbacks (there are only 6 of those, mostly as part
of kthread.h and kmod.h exported mechanisms, plus kernel_init()
itself).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With a system where, num_present_cpus < num_possible_cpus, even if all
CPUs are online, non-present CPUs don't have per_cpu buffers allocated.
If per_cpu/<cpu>/buffer_size_kb is modified for such a CPU, it can cause
a panic due to NULL dereference in ring_buffer_resize().
To fix this, resize operation is allowed only if the per-cpu buffer has
been initialized.
Link: http://lkml.kernel.org/r/1349912427-6486-1-git-send-email-vnagarnaik@google.com
Cc: stable@vger.kernel.org # 3.5+
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It doesn't, because the clean targets don't include kernel/Makefile, and
because two files were missing from the list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Place an indication that the certificate should use utf8 strings into the
x509.genkey template generated by kernel/Makefile.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Use the same digest type for the autogenerated key signature as for the module
signature so that the hash algorithm is guaranteed to be present in the kernel.
Without this, the X.509 certificate loader may reject the X.509 certificate so
generated because it was self-signed and the signature will be checked against
itself - but this won't work if the digest algorithm must be loaded as a
module.
The symptom is that the key fails to load with the following message emitted
into the kernel log:
MODSIGN: Problem loading in-kernel X.509 certificate (-65)
the error in brackets being -ENOPKG. What you should see is something like:
MODSIGN: Loaded cert 'Magarathea: Glacier signing key: 9588321144239a119d3406d4c4cf1fbae1836fa0'
Note that this doesn't apply to certificates that are not self-signed as we
don't check those currently as they require the parent CA certificate to be
available.
Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Check the signature on the module against the keys compiled into the kernel or
available in a hardware key store.
Currently, only RSA keys are supported - though that's easy enough to change,
and the signature is expected to contain raw components (so not a PGP or
PKCS#7 formatted blob).
The signature blob is expected to consist of the following pieces in order:
(1) The binary identifier for the key. This is expected to match the
SubjectKeyIdentifier from an X.509 certificate. Only X.509 type
identifiers are currently supported.
(2) The signature data, consisting of a series of MPIs in which each is in
the format of a 2-byte BE word sizes followed by the content data.
(3) A 12 byte information block of the form:
struct module_signature {
enum pkey_algo algo : 8;
enum pkey_hash_algo hash : 8;
enum pkey_id_type id_type : 8;
u8 __pad;
__be32 id_length;
__be32 sig_length;
};
The three enums are defined in crypto/public_key.h.
'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA).
'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1,
etc.).
'id_type' contains the public-key identifier type (0->PGP, 1->X.509).
'__pad' should be 0.
'id_length' should contain in the binary identifier length in BE form.
'sig_length' should contain in the signature data length in BE form.
The lengths are in BE order rather than CPU order to make dealing with
cross-compilation easier.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
Include a PGP keyring containing the public keys required to perform module
verification in the kernel image during build and create a special keyring
during boot which is then populated with keys of crypto type holding the public
keys found in the PGP keyring.
These can be seen by root:
[root@andromeda ~]# cat /proc/keys
07ad4ee0 I----- 1 perm 3f010000 0 0 crypto modsign.0: RSA 87b9b3bd []
15c7f8c3 I----- 1 perm 1f030000 0 0 keyring .module_sign: 1/4
...
It is probably worth permitting root to invalidate these keys, resulting in
their removal and preventing further modules from being loaded with that key.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Automatically generate keys for module signing if they're absent so that
allyesconfig doesn't break. The builder should consider generating their own
key and certificate, however, so that the keys are appropriately named.
The private key for the module signer should be placed in signing_key.priv
(unencrypted!) and the public key in an X.509 certificate as signing_key.x509.
If a transient key is desired for signing the modules, a config file for
'openssl req' can be placed in x509.genkey, looking something like the
following:
[ req ]
default_bits = 4096
distinguished_name = req_distinguished_name
prompt = no
x509_extensions = myexts
[ req_distinguished_name ]
O = Magarathea
CN = Glacier signing key
emailAddress = slartibartfast@magrathea.h2g2
[ myexts ]
basicConstraints=critical,CA:FALSE
keyUsage=digitalSignature
subjectKeyIdentifier=hash
authorityKeyIdentifier=hash
The build process will use this to configure:
openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \
-x509 -config x509.genkey \
-outform DER -out signing_key.x509 \
-keyout signing_key.priv
to generate the key.
Note that it is required that the X.509 certificate have a subjectKeyIdentifier
and an authorityKeyIdentifier. Without those, the certificate will be
rejected. These can be used to check the validity of a certificate.
Note that 'make distclean' will remove signing_key.{priv,x509} and x509.genkey,
whether or not they were generated automatically.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we're in FIPS mode, we should panic if we fail to verify the signature on a
module or we're asked to load an unsigned module in signature enforcing mode.
Possibly FIPS mode should automatically enable enforcing mode.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do a very simple search for a particular string appended to the module
(which is cache-hot and about to be SHA'd anyway). There's both a config
option and a boot parameter which control whether we accept or fail with
unsigned modules and modules that are signed with an unknown key.
If module signing is enabled, the kernel will be tainted if a module is
loaded that is unsigned or has a signature for which we don't have the
key.
(Useful feedback and tweaks by David Howells <dhowells@redhat.com>)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we rely on all IRQ chip instances to dynamically
allocate their IRQ descriptors unless they use the linear
IRQ domain. So for irqdomain_add_legacy() and
irqdomain_add_simple() the caller need to make sure that
descriptors are allocated.
Let's slightly augment the yet unused irqdomain_add_simple()
to also allocate descriptors as a means to simplify usage
and avoid code duplication throughout the kernel.
We warn if descriptors cannot be allocated, e.g. if a
platform has the bad habit of hogging descriptors at boot
time.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
audit_log_start() may return NULL, this is unchecked by the caller in
audit_log_link_denied() and could cause a NULL ptr deref.
Introduced by commit a51d9eaa ("fs: add link restriction audit reporting").
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull generic execve() changes from Al Viro:
"This introduces the generic kernel_thread() and kernel_execve()
functions, and switches x86, arm, alpha, um and s390 over to them."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (26 commits)
s390: convert to generic kernel_execve()
s390: switch to generic kernel_thread()
s390: fold kernel_thread_helper() into ret_from_fork()
s390: fold execve_tail() into start_thread(), convert to generic sys_execve()
um: switch to generic kernel_thread()
x86, um/x86: switch to generic sys_execve and kernel_execve
x86: split ret_from_fork
alpha: introduce ret_from_kernel_execve(), switch to generic kernel_execve()
alpha: switch to generic kernel_thread()
alpha: switch to generic sys_execve()
arm: get rid of execve wrapper, switch to generic execve() implementation
arm: optimized current_pt_regs()
arm: introduce ret_from_kernel_execve(), switch to generic kernel_execve()
arm: split ret_from_fork, simplify kernel_thread() [based on patch by rmk]
generic sys_execve()
generic kernel_execve()
new helper: current_pt_regs()
preparation for generic kernel_thread()
um: kill thread->forking
um: let signal_delivered() do SIGTRAP on singlestepping into handler
...
We fixed a bunch of integer overflows in timekeeping code during the 3.6
cycle. I did an audit based on that and found this potential overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/20121009071823.GA19159@elgon.mountain
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Adding two (or more) timers with large values for "expires" (they have
to reside within tv5 in the same list) leads to endless looping
between cascade() and internal_add_timer() in case CONFIG_BASE_SMALL
is one and jiffies are crossing the value 1 << 18. The bug was
introduced between 2.6.11 and 2.6.12 (and survived for quite some
time).
This patch ensures that when cascade() is called timers within tv5 are
not added endlessly to their own list again, instead they are added to
the next lower tv level tv4 (as expected).
Signed-off-by: Christian Hildner <christian.hildner@siemens.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: http://lkml.kernel.org/r/98673C87CB31274881CFFE0B65ECC87B0F5FC1963E@DEFTHW99EA4MSX.ww902.siemens.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
In order to allow sleeping during invalidate_page mmu notifier calls, we
need to avoid calling when holding the PT lock. In addition to its direct
calls, invalidate_page can also be called as a substitute for a change_pte
call, in case the notifier client hasn't implemented change_pte.
This patch drops the invalidate_page call from change_pte, and instead
wraps all calls to change_pte with invalidate_range_start and
invalidate_range_end calls.
Note that change_pte still cannot sleep after this patch, and that clients
implementing change_pte should not take action on it in case the number of
outstanding invalidate_range_start calls is larger than one, otherwise
they might miss a later invalidation.
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Cc: Andrea Arcangeli <andrea@qumranet.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Haggai Eran <haggaie@mellanox.com>
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Liran Liss <liranl@mellanox.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the generic interval tree code that was introduced in "mm: replace
vma prio_tree with an interval tree".
Changes:
- fixed 'endpoing' typo noticed by Andrew Morton
- replaced include/linux/interval_tree_tmpl.h, which was used as a
template (including it automatically defined the interval tree
functions) with include/linux/interval_tree_generic.h, which only
defines a preprocessor macro INTERVAL_TREE_DEFINE(), which itself
defines the interval tree functions when invoked. Now that is a very
long macro which is unfortunate, but it does make the usage sites
(lib/interval_tree.c and mm/interval_tree.c) a bit nicer than previously.
- make use of RB_DECLARE_CALLBACKS() in the INTERVAL_TREE_DEFINE() macro,
instead of duplicating that code in the interval tree template.
- replaced vma_interval_tree_add(), which was actually handling the
nonlinear and interval tree cases, with vma_interval_tree_insert_after()
which handles only the interval tree case and has an API that is more
consistent with the other interval tree handling functions.
The nonlinear case is now handled explicitly in kernel/fork.c dup_mmap().
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement an interval tree as a replacement for the VMA prio_tree. The
algorithms are similar to lib/interval_tree.c; however that code can't be
directly reused as the interval endpoints are not explicitly stored in the
VMA. So instead, the common algorithm is moved into a template and the
details (node type, how to get interval endpoints from the node, etc) are
filled in using the C preprocessor.
Once the interval tree functions are available, using them as a
replacement to the VMA prio tree is a relatively simple, mechanical job.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The deprecated /proc/<pid>/oom_adj is scheduled for removal this month.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA,
currently it lost original meaning but still has some effects:
| effect | alternative flags
-+------------------------+---------------------------------------------
1| account as reserved_vm | VM_IO
2| skip in core dump | VM_IO, VM_DONTDUMP
3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP
4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP
This patch removes reserved_vm counter from mm_struct. Seems like nobody
cares about it, it does not exported into userspace directly, it only
reduces total_vm showed in proc.
Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP.
remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP.
remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP.
[akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the kernel sets mm->exe_file during sys_execve() and then tracks
number of vmas with VM_EXECUTABLE flag in mm->num_exe_file_vmas, as soon
as this counter drops to zero kernel resets mm->exe_file to NULL. Plus it
resets mm->exe_file at last mmput() when mm->mm_users drops to zero.
VMA with VM_EXECUTABLE flag appears after mapping file with flag
MAP_EXECUTABLE, such vmas can appears only at sys_execve() or after vma
splitting, because sys_mmap ignores this flag. Usually binfmt module sets
mm->exe_file and mmaps executable vmas with this file, they hold
mm->exe_file while task is running.
comment from v2.6.25-6245-g925d1c4 ("procfs task exe symlink"),
where all this stuff was introduced:
> The kernel implements readlink of /proc/pid/exe by getting the file from
> the first executable VMA. Then the path to the file is reconstructed and
> reported as the result.
>
> Because of the VMA walk the code is slightly different on nommu systems.
> This patch avoids separate /proc/pid/exe code on nommu systems. Instead of
> walking the VMAs to find the first executable file-backed VMA we store a
> reference to the exec'd file in the mm_struct.
>
> That reference would prevent the filesystem holding the executable file
> from being unmounted even after unmapping the VMAs. So we track the number
> of VM_EXECUTABLE VMAs and drop the new reference when the last one is
> unmapped. This avoids pinning the mounted filesystem.
exe_file's vma accounting is hooked into every file mmap/unmmap and vma
split/merge just to fix some hypothetical pinning fs from umounting by mm,
which already unmapped all its executable files, but still alive.
Seems like currently nobody depends on this behaviour. We can try to
remove this logic and keep mm->exe_file until final mmput().
mm->exe_file is still protected with mm->mmap_sem, because we want to
change it via new sys_prctl(PR_SET_MM_EXE_FILE). Also via this syscall
task can change its mm->exe_file and unpin mountpoint explicitly.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some security modules and oprofile still uses VM_EXECUTABLE for retrieving
a task's executable file. After this patch they will use mm->exe_file
directly. mm->exe_file is protected with mm->mmap_sem, so locking stays
the same.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com> [arch/tile]
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> [tomoyo]
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The synchronization between CPU hotplug readers and writers is achieved
by means of refcounting, safeguarded by the cpu_hotplug.lock.
get_online_cpus() increments the refcount, whereas put_online_cpus()
decrements it. If we ever hit an imbalance between the two, we end up
compromising the guarantees of the hotplug synchronization i.e, for
example, an extra call to put_online_cpus() can end up allowing a
hotplug reader to execute concurrently with a hotplug writer.
So, add a WARN_ON() in put_online_cpus() to detect such cases where the
refcount can go negative, and also attempt to fix it up, so that we can
continue to run.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce SYSCTL_EXCEPTION_TRACE config option and selec it in the
architectures requiring support for the "exception-trace" debug_table
entry in kernel/sysctl.c.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill noted the following deadlock cycle on shutdown involving padata:
> With commit 755609a908 I've got deadlock on
> poweroff.
>
> It guess it happens because of race for cpu_hotplug.lock:
>
> CPU A CPU B
> disable_nonboot_cpus()
> _cpu_down()
> cpu_hotplug_begin()
> mutex_lock(&cpu_hotplug.lock);
> __cpu_notify()
> padata_cpu_callback()
> __padata_remove_cpu()
> padata_replace()
> synchronize_rcu()
> rcu_gp_kthread()
> get_online_cpus();
> mutex_lock(&cpu_hotplug.lock);
It would of course be good to eliminate grace-period delays from
CPU-hotplug notifiers, but that is a separate issue. Deadlock is
not an appropriate diagnostic for excessive CPU-hotplug latency.
Fortunately, grace-period initialization does not actually need to
exclude all of the CPU-hotplug operation, but rather only RCU's own
CPU_UP_PREPARE and CPU_DEAD CPU-hotplug notifiers. This commit therefore
introduces a new per-rcu_state onoff_mutex that provides the required
concurrency control in place of the get_online_cpus() that was previously
in rcu_gp_init().
Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Multiple threads can manipulate uprobe->flags, this is obviously
unsafe. For example mmap can set UPROBE_COPY_INSN while register
tries to set UPROBE_RUN_HANDLER, the latter can also race with
can_skip_sstep() which clears UPROBE_SKIP_SSTEP.
Change this code to use bitops.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
install_breakpoint() is called under mm->mmap_sem, this protects
set_swbp() but not prepare_uprobe(). Two or more different tasks
can call install_breakpoint()->prepare_uprobe() at the same time,
this leads to numerous problems if UPROBE_COPY_INSN is not set.
Just for example, the second copy_insn() can corrupt the already
analyzed/fixuped uprobe->arch.insn and race with handle_swbp().
This patch simply adds uprobe->copy_mutex to serialize this code.
We could probably reuse ->consumer_rwsem, but this would mean that
consumer->handler() can not use mm->mmap_sem, not good.
Note: this is another temporary ugly hack until we move this logic
into uprobe_register().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Preparation. Extract the copy_insn/arch_uprobe_analyze_insn code
from install_breakpoint() into the new helper, prepare_uprobe().
And move uprobe->flags defines from uprobes.h to uprobes.c, nobody
else can use them anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Strictly speaking this race was added by me in 56bb4cf6. However
I think that this bug is just another indication that we should
move copy_insn/uprobe_analyze_insn code from install_breakpoint()
to uprobe_register(), there are a lot of other reasons for that.
Until then, add a hack to close the race.
A task can hit uprobe U1, but before it calls find_uprobe() this
uprobe can be unregistered *AND* another uprobe U2 can be added to
uprobes_tree at the same inode/offset. In this case handle_swbp()
will use the not-fully-initialized U2, in particular its arch.insn
for xol.
Add the additional !UPROBE_COPY_INSN check into handle_swbp(),
if this flag is not set we simply restart as if the new uprobe was
not inserted yet. This is not very nice, we need barriers, but we
will remove this hack when we change uprobe_register().
Note: with or without this patch install_breakpoint() can race with
itself, yet another reson to kill UPROBE_COPY_INSN altogether. And
even the usage of uprobe->flags is not safe. See the next patches.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
delete_uprobe() must not be called if register_for_each_vma(false)
fails to remove all breakpoints, __uprobe_unregister() is correct.
The problem is that register_for_each_vma(false) always returns 0
and thus this logic does not work.
1. Change verify_opcode() to return 0 rather than -EINVAL when
unregister detects the !is_swbp insn, we can treat this case
as success and currently unregister paths ignore the error
code anyway.
2. Change remove_breakpoint() to propagate the error code from
write_opcode().
3. Change register_for_each_vma(is_register => false) to remove
as much breakpoints as possible but return non-zero if
remove_breakpoint() fails at least once.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Pull virtio changes from Rusty Russell:
"New workflow: same git trees pulled by linux-next get sent straight to
Linus. Git is awkward at shuffling patches compared with quilt or mq,
but that doesn't happen often once things get into my -next branch."
* 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits)
lguest: fix occasional crash in example launcher.
virtio-blk: Disable callback in virtblk_done()
virtio_mmio: Don't attempt to create empty virtqueues
virtio_mmio: fix off by one error allocating queue
drivers/virtio/virtio_pci.c: fix error return code
virtio: don't crash when device is buggy
virtio: remove CONFIG_VIRTIO_RING
virtio: add help to CONFIG_VIRTIO option.
virtio: support reserved vqs
virtio: introduce an API to set affinity for a virtqueue
virtio-ring: move queue_index to vring_virtqueue
virtio_balloon: not EXPERIMENTAL any more.
virtio-balloon: dependency fix
virtio-blk: fix NULL checking in virtblk_alloc_req()
virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path
virtio-blk: Add bio-based IO path for virtio-blk
virtio: console: fix error handling in init() function
tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace
tools: Add guest trace agent as a user tool
virtio/console: Allocate scatterlist according to the current pipe size
...
and no longer use its debugfs knobs. The change slightly touches
kernel/trace directory, but it got the needed ack from Steven Rostedt:
http://lkml.org/lkml/2012/8/21/688
2. Added maintainers entry;
3. A bunch of fixes, nothing special.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=1HAE
-----END PGP SIGNATURE-----
Merge tag 'for-v3.7' of git://git.infradead.org/users/cbou/linux-pstore
Pull pstore changes from Anton Vorontsov:
1) We no longer ad-hoc to the function tracer "high level"
infrastructure and no longer use its debugfs knobs. The change
slightly touches kernel/trace directory, but it got the needed ack
from Steven Rostedt:
http://lkml.org/lkml/2012/8/21/688
2) Added maintainers entry;
3) A bunch of fixes, nothing special.
* tag 'for-v3.7' of git://git.infradead.org/users/cbou/linux-pstore:
pstore: Avoid recursive spinlocks in the oops_in_progress case
pstore/ftrace: Convert to its own enable/disable debugfs knob
pstore/ram: Add missing platform_device_unregister
MAINTAINERS: Add pstore maintainers
pstore/ram: Mark ramoops_pstore_write_buf() as notrace
pstore/ram: Fix printk format warning
pstore/ram: Fix possible NULL dereference
Using a recursive call add a non-conflicting region in
__reserve_region_with_split() could result in a stack overflow in the case
that the recursive calls are too deep. Convert the recursive calls to an
iterative loop to avoid the problem.
Tested on a machine containing 135 regions. The kernel no longer panicked
with stack overflow.
Also tested with code arbitrarily adding regions with no conflict,
embedding two consecutive conflicts and embedding two non-consecutive
conflicts.
Signed-off-by: T Makphaibulchoke <tmac@hp.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@gmail.com>
Cc: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If prepare_reply() succeeds we have allocated memory for 'rep_skb'. If
nla_reserve() then subsequently fails and returns NULL we fail to release
the memory we allocated, thus causing a leak.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The inclusion of <generated/utsrelease.h> is unnecessary.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory patch for the introduction of NT_SIGINFO elf note.
With this patch we pass "siginfo_t *siginfo" instead of "int signr" to
do_coredump() and put it into coredump_params. It will be used by the
next patch. Most changes are simple s/signr/siginfo->si_signo/.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: "Jonathan M. Foote" <jmfoote@cert.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Create a new header file, fs/coredump.h, which contains functions only
used by the new coredump.c. It also moves do_coredump to the
include/linux/coredump.h header file, for consistency.
Signed-off-by: Alex Kelly <alex.page.kelly@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adds an expert Kconfig option, CONFIG_COREDUMP, which allows disabling of
core dump. This saves approximately 2.6k in the compiled kernel, and
complements CONFIG_ELF_CORE, which now depends on it.
CONFIG_COREDUMP also disables coredump-related sysctls, except for
suid_dumpable and related functions, which are necessary for ptrace.
[akpm@linux-foundation.org: fix binfmt_aout.c build]
Signed-off-by: Alex Kelly <alex.page.kelly@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
orderly_poweroff is trying to poweroff platform in two steps:
step 1: Call user space application to poweroff
step 2: If user space poweroff fail, then do a force power off if force param
is set.
The bug here is, step 1 is always successful with param UMH_NO_WAIT, which obey
the design goal of orderly_poweroff.
We have two choices here:
UMH_WAIT_EXEC which means wait for the exec, but not the process;
UMH_WAIT_PROC which means wait for the process to complete.
we need to trade off the two choices:
If using UMH_WAIT_EXEC, there is potential issue comments by Serge E.
Hallyn: The exec will have started, but may for whatever (very unlikely)
reason fail.
If using UMH_WAIT_PROC, there is potential issue comments by Eric W.
Biederman: If the caller is not running in a kernel thread then we can
easily get into a case where the user space caller will block waiting for
us when we are waiting for the user space caller.
Thanks for their excellent ideas, based on the above discussion, we
finally choose UMH_WAIT_EXEC, which is much more safe, if the user
application really fails, we just complain the application itself, it
seems a better choice here.
Signed-off-by: Feng Hong <hongfeng@marvell.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As kernel_power_off() calls disable_nonboot_cpus(), we may also want to
have kernel_restart() call disable_nonboot_cpus(). Doing so can help
machines that require boot cpu be the last alive cpu during reboot to
survive with kernel restart.
This fixes one reboot issue seen on imx6q (Cortex-A9 Quad). The machine
requires that the restart routine be run on the primary cpu rather than
secondary ones. Otherwise, the secondary core running the restart
routine will fail to come to online after reboot.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri reported that he could trigger the WARN_ON_ONCE() in
perf_cgroup_switch() using sw-events. This is because sw-events share
a cpuctx with multiple PMUs.
Use the ->unique_pmu pointer to limit the pmu iteration to unique
cpuctx instances.
Reported-and-Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-so7wi2zf3jjzrwcutm2mkz0j@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stephane thought the perf_cpu_context::active_pmu name confusing and
suggested using 'unique_pmu' instead.
This pointer is a pointer to a 'random' pmu sharing the cpuctx
instance, therefore limiting a for_each_pmu loop to those where
cpuctx->unique_pmu matches the pmu we get a loop over unique cpuctx
instances.
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-kxyjqpfj2fn9gt7kwu5ag9ks@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Once array sched_domains_numa_masks[] []is defined, it is never updated.
When a new cpu on a new node is onlined, the coincident member in
sched_domains_numa_masks[][] is not initialized, and all the masks are 0.
As a result, the build_overlap_sched_groups() will initialize a NULL
sched_group for the new cpu on the new node, which will lead to kernel panic:
[ 3189.403280] Call Trace:
[ 3189.403286] [<ffffffff8106c36f>] warn_slowpath_common+0x7f/0xc0
[ 3189.403289] [<ffffffff8106c3ca>] warn_slowpath_null+0x1a/0x20
[ 3189.403292] [<ffffffff810b1d57>] build_sched_domains+0x467/0x470
[ 3189.403296] [<ffffffff810b2067>] partition_sched_domains+0x307/0x510
[ 3189.403299] [<ffffffff810b1ea2>] ? partition_sched_domains+0x142/0x510
[ 3189.403305] [<ffffffff810fcc93>] cpuset_update_active_cpus+0x83/0x90
[ 3189.403308] [<ffffffff810b22a8>] cpuset_cpu_active+0x38/0x70
[ 3189.403316] [<ffffffff81674b87>] notifier_call_chain+0x67/0x150
[ 3189.403320] [<ffffffff81664647>] ? native_cpu_up+0x18a/0x1b5
[ 3189.403328] [<ffffffff810a044e>] __raw_notifier_call_chain+0xe/0x10
[ 3189.403333] [<ffffffff81070470>] __cpu_notify+0x20/0x40
[ 3189.403337] [<ffffffff8166663e>] _cpu_up+0xe9/0x131
[ 3189.403340] [<ffffffff81666761>] cpu_up+0xdb/0xee
[ 3189.403348] [<ffffffff8165667c>] store_online+0x9c/0xd0
[ 3189.403355] [<ffffffff81437640>] dev_attr_store+0x20/0x30
[ 3189.403361] [<ffffffff8124aa63>] sysfs_write_file+0xa3/0x100
[ 3189.403368] [<ffffffff811ccbe0>] vfs_write+0xd0/0x1a0
[ 3189.403371] [<ffffffff811ccdb4>] sys_write+0x54/0xa0
[ 3189.403375] [<ffffffff81679c69>] system_call_fastpath+0x16/0x1b
[ 3189.403377] ---[ end trace 1e6cf85d0859c941 ]---
[ 3189.403398] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
This patch registers a new notifier for cpu hotplug notify chain, and
updates sched_domains_numa_masks every time a new cpu is onlined or offlined.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
[ fixed compile warning ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348578751-16904-3-git-send-email-tangchen@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We should temporarily reset 'sched_domains_numa_levels' to 0 after
it is reset to 'level' in sched_init_numa(). If it fails to allocate
memory for array sched_domains_numa_masks[][], the array will contain
less then 'level' members. This could be dangerous when we use it to
iterate array sched_domains_numa_masks[][] in other functions.
This patch set sched_domains_numa_levels to 0 before initializing
array sched_domains_numa_masks[][], and reset it to 'level' when
sched_domains_numa_masks[][] is fully initialized.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348578751-16904-2-git-send-email-tangchen@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we stop the tick in idle, we save the current jiffies value
in ts->idle_jiffies. This snapshot is substracted from the later
value of jiffies when the tick is restarted and the resulting
delta is accounted as idle cputime. This is how we handle the
idle cputime accounting without the tick.
But sometimes we need to schedule the next tick to some time in
the future instead of completely stopping it. In this case, a
tick may happen before we restart the periodic behaviour and
from that tick we account one jiffy to idle cputime as usual but
we also increment the ts->idle_jiffies snapshot by one so that
when we compute the delta to account, we substract the one jiffy
we just accounted.
To prepare for stopping the tick outside idle, we introduced a
check that prevents from fixing up that ts->idle_jiffies if we
are not running the idle task. But we use idle_cpu() for that
and this is a problem if we run the tick while another CPU
remotely enqueues a ttwu to our runqueue:
CPU 0: CPU 1:
tick_sched_timer() { ttwu_queue_remote()
if (idle_cpu(CPU 0))
ts->idle_jiffies++;
}
Here, idle_cpu() notes that &rq->wake_list is not empty and
hence won't consider the CPU as idle. As a result,
ts->idle_jiffies won't be incremented. But this is wrong because
we actually account the current jiffy to idle cputime. And that
jiffy won't get substracted from the nohz time delta. So in the
end, this jiffy is accounted twice.
Fix this by changing idle_cpu(smp_processor_id()) with
is_idle_task(current). This way the jiffy is substracted
correctly even if a ttwu operation is enqueued on the CPU.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # 3.5+
Link: http://lkml.kernel.org/r/1349308004-3482-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJQbY/2AAoJEI7yEDeUysxlymQQAIv5svpAI/FUe3FhvBi3IW2h
WWMIpbdhHyocaINT18qNp8prO0iwoaBfgsnU8zuB34MrbdUgiwSHgM6T4Ff4NGa+
R4u+gpyKYwxNQYKeJyj04luXra/krxwHL1u9OwN7o44JuQXAmzrw2tZ9ad1ArvL3
eoZ6kGsPcdHPZMZWw2jN5xzBsRtqybm0GPPQh1qPXdn8UlPPd1X7owvbaud2y4+e
StVIpGY6wrsO36f7UcA4Gm1EP/1E6Lm5KMXJyHgM9WBRkEfp92jTY5+XKv91vK8Z
VKUd58QMdZE5NCNBkAR9U5N9aH0oSXnFU/g8hgiwGvrhS3IsSkKUePE6sVyMVTIO
VptKRYe0AdmD/g25p6ApJsguV7ITlgoCPaE4rMmRcW9/bw8+iY098r7tO7w11H8M
TyFOXihc3B+rlH8WdzOblwxHMC4yRuiPIktaA3WwbX7eA7Xv/ZRtdidifXKtgsVE
rtubVqwGyYcHoX1Y+JiByIW1NN0pYncJhPEdc8KbRe2wKs3amA9rio1mUpBYYBPO
B0ygcITftyXbhcTtssgcwBDGXB0AAGqI7wqdtJhFeIrKwHXD7fNeAGRwO8oKxmlj
0aPwo9fDtpI+e6BFTohEgjZBocRvXXNWLnDSFB0E7xDR31bACck2FG5FAp1DxdS7
lb/nbAsXf9UJLgGir4I1
=kN6V
-----END PGP SIGNATURE-----
Merge tag 'kvm-3.7-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Avi Kivity:
"Highlights of the changes for this release include support for vfio
level triggered interrupts, improved big real mode support on older
Intels, a streamlines guest page table walker, guest APIC speedups,
PIO optimizations, better overcommit handling, and read-only memory."
* tag 'kvm-3.7-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (138 commits)
KVM: s390: Fix vcpu_load handling in interrupt code
KVM: x86: Fix guest debug across vcpu INIT reset
KVM: Add resampling irqfds for level triggered interrupts
KVM: optimize apic interrupt delivery
KVM: MMU: Eliminate pointless temporary 'ac'
KVM: MMU: Avoid access/dirty update loop if all is well
KVM: MMU: Eliminate eperm temporary
KVM: MMU: Optimize is_last_gpte()
KVM: MMU: Simplify walk_addr_generic() loop
KVM: MMU: Optimize pte permission checks
KVM: MMU: Update accessed and dirty bits after guest pagetable walk
KVM: MMU: Move gpte_access() out of paging_tmpl.h
KVM: MMU: Optimize gpte_access() slightly
KVM: MMU: Push clean gpte write protection out of gpte_access()
KVM: clarify kvmclock documentation
KVM: make processes waiting on vcpu mutex killable
KVM: SVM: Make use of asm.h
KVM: VMX: Make use of asm.h
KVM: VMX: Make lto-friendly
KVM: x86: lapic: Clean up find_highest_vector() and count_vectors()
...
Conflicts:
arch/s390/include/asm/processor.h
arch/x86/kvm/i8259.c
Pull security subsystem updates from James Morris:
"Highlights:
- Integrity: add local fs integrity verification to detect offline
attacks
- Integrity: add digital signature verification
- Simple stacking of Yama with other LSMs (per LSS discussions)
- IBM vTPM support on ppc64
- Add new driver for Infineon I2C TIS TPM
- Smack: add rule revocation for subject labels"
Fixed conflicts with the user namespace support in kernel/auditsc.c and
security/integrity/ima/ima_policy.c.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (39 commits)
Documentation: Update git repository URL for Smack userland tools
ima: change flags container data type
Smack: setprocattr memory leak fix
Smack: implement revoking all rules for a subject label
Smack: remove task_wait() hook.
ima: audit log hashes
ima: generic IMA action flag handling
ima: rename ima_must_appraise_or_measure
audit: export audit_log_task_info
tpm: fix tpm_acpi sparse warning on different address spaces
samples/seccomp: fix 31 bit build on s390
ima: digital signature verification support
ima: add support for different security.ima data types
ima: add ima_inode_setxattr/removexattr function and calls
ima: add inode_post_setattr call
ima: replace iint spinblock with rwlock/read_lock
ima: allocating iint improvements
ima: add appraise action keywords and default rules
ima: integrity appraisal extension
vfs: move ima_file_free before releasing the file
...
Pull vfs update from Al Viro:
- big one - consolidation of descriptor-related logics; almost all of
that is moved to fs/file.c
(BTW, I'm seriously tempted to rename the result to fd.c. As it is,
we have a situation when file_table.c is about handling of struct
file and file.c is about handling of descriptor tables; the reasons
are historical - file_table.c used to be about a static array of
struct file we used to have way back).
A lot of stray ends got cleaned up and converted to saner primitives,
disgusting mess in android/binder.c is still disgusting, but at least
doesn't poke so much in descriptor table guts anymore. A bunch of
relatively minor races got fixed in process, plus an ext4 struct file
leak.
- related thing - fget_light() partially unuglified; see fdget() in
there (and yes, it generates the code as good as we used to have).
- also related - bits of Cyrill's procfs stuff that got entangled into
that work; _not_ all of it, just the initial move to fs/proc/fd.c and
switch of fdinfo to seq_file.
- Alex's fs/coredump.c spiltoff - the same story, had been easier to
take that commit than mess with conflicts. The rest is a separate
pile, this was just a mechanical code movement.
- a few misc patches all over the place. Not all for this cycle,
there'll be more (and quite a few currently sit in akpm's tree)."
Fix up trivial conflicts in the android binder driver, and some fairly
simple conflicts due to two different changes to the sock_alloc_file()
interface ("take descriptor handling from sock_alloc_file() to callers"
vs "net: Providing protocol type via system.sockprotoname xattr of
/proc/PID/fd entries" adding a dentry name to the socket)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits)
MAX_LFS_FILESIZE should be a loff_t
compat: fs: Generic compat_sys_sendfile implementation
fs: push rcu_barrier() from deactivate_locked_super() to filesystems
btrfs: reada_extent doesn't need kref for refcount
coredump: move core dump functionality into its own file
coredump: prevent double-free on an error path in core dumper
usb/gadget: fix misannotations
fcntl: fix misannotations
ceph: don't abuse d_delete() on failure exits
hypfs: ->d_parent is never NULL or negative
vfs: delete surplus inode NULL check
switch simple cases of fget_light to fdget
new helpers: fdget()/fdput()
switch o2hb_region_dev_write() to fget_light()
proc_map_files_readdir(): don't bother with grabbing files
make get_file() return its argument
vhost_set_vring(): turn pollstart/pollstop into bool
switch prctl_set_mm_exe_file() to fget_light()
switch xfs_find_handle() to fget_light()
switch xfs_swapext() to fget_light()
...
* Improved system suspend/resume and runtime PM handling for the SH TMU, CMT
and MTU2 clock event devices (also used by ARM/shmobile).
* Generic PM domains framework extensions related to cpuidle support and
domain objects lookup using names.
* ARM/shmobile power management updates including improved support for the
SH7372's A4S power domain containing the CPU core.
* cpufreq changes related to AMD CPUs support from Matthew Garrett, Andre
Przywara and Borislav Petkov.
* cpu0 cpufreq driver from Shawn Guo.
* cpufreq governor fixes related to the relaxing of limit from Michal Pecio.
* OMAP cpufreq updates from Axel Lin and Richard Zhao.
* cpuidle ladder governor fixes related to the disabling of states from
Carsten Emde and me.
* Runtime PM core updates related to the interactions with the system suspend
core from Alan Stern and Kevin Hilman.
* Wakeup sources modification allowing more helper functions to be called from
interrupt context from John Stultz and additional diagnostic code from Todd
Poynor.
* System suspend error code path fix from Feng Hong.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)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=rbCk
-----END PGP SIGNATURE-----
Merge tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael J Wysocki:
- Improved system suspend/resume and runtime PM handling for the SH
TMU, CMT and MTU2 clock event devices (also used by ARM/shmobile).
- Generic PM domains framework extensions related to cpuidle support
and domain objects lookup using names.
- ARM/shmobile power management updates including improved support for
the SH7372's A4S power domain containing the CPU core.
- cpufreq changes related to AMD CPUs support from Matthew Garrett,
Andre Przywara and Borislav Petkov.
- cpu0 cpufreq driver from Shawn Guo.
- cpufreq governor fixes related to the relaxing of limit from Michal
Pecio.
- OMAP cpufreq updates from Axel Lin and Richard Zhao.
- cpuidle ladder governor fixes related to the disabling of states from
Carsten Emde and me.
- Runtime PM core updates related to the interactions with the system
suspend core from Alan Stern and Kevin Hilman.
- Wakeup sources modification allowing more helper functions to be
called from interrupt context from John Stultz and additional
diagnostic code from Todd Poynor.
- System suspend error code path fix from Feng Hong.
Fixed up conflicts in cpufreq/powernow-k8 that stemmed from the
workqueue fixes conflicting fairly badly with the removal of support for
hardware P-state chips. The changes were independent but somewhat
intertwined.
* tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code"
PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2
cpuidle: rename function name "__cpuidle_register_driver", v2
cpufreq: OMAP: Check IS_ERR() instead of NULL for omap_device_get_by_hwmod_name
cpuidle: remove some empty lines
PM: Prevent runtime suspend during system resume
PM QoS: Use spinlock in the per-device PM QoS constraints code
PM / Sleep: use resume event when call dpm_resume_early
cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure
ACPI / processor: remove pointless variable initialization
ACPI / processor: remove unused function parameter
cpufreq: OMAP: remove loops_per_jiffy recalculate for smp
sections: fix section conflicts in drivers/cpufreq
cpufreq: conservative: update frequency when limits are relaxed
cpufreq / ondemand: update frequency when limits are relaxed
properly __init-annotate pm_sysrq_init()
cpufreq: Add a generic cpufreq-cpu0 driver
PM / OPP: Initialize OPP table from device tree
ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp
cpufreq: Remove support for hardware P-state chips from powernow-k8
...
Pull networking changes from David Miller:
1) GRE now works over ipv6, from Dmitry Kozlov.
2) Make SCTP more network namespace aware, from Eric Biederman.
3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.
4) Make openvswitch network namespace aware, from Pravin B Shelar.
5) IPV6 NAT implementation, from Patrick McHardy.
6) Server side support for TCP Fast Open, from Jerry Chu and others.
7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
Borkmann.
8) Increate the loopback default MTU to 64K, from Eric Dumazet.
9) Use a per-task rather than per-socket page fragment allocator for
outgoing networking traffic. This benefits processes that have very
many mostly idle sockets, which is quite common.
From Eric Dumazet.
10) Use up to 32K for page fragment allocations, with fallbacks to
smaller sizes when higher order page allocations fail. Benefits are
a) less segments for driver to process b) less calls to page
allocator c) less waste of space.
From Eric Dumazet.
11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.
12) VXLAN device driver, one way to handle VLAN issues such as the
limitation of 4096 VLAN IDs yet still have some level of isolation.
From Stephen Hemminger.
13) As usual there is a large boatload of driver changes, with the scale
perhaps tilted towards the wireless side this time around.
Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
hyperv: Add buffer for extended info after the RNDIS response message.
hyperv: Report actual status in receive completion packet
hyperv: Remove extra allocated space for recv_pkt_list elements
hyperv: Fix page buffer handling in rndis_filter_send_request()
hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
hyperv: Fix the max_xfer_size in RNDIS initialization
vxlan: put UDP socket in correct namespace
vxlan: Depend on CONFIG_INET
sfc: Fix the reported priorities of different filter types
sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
sfc: Fix loopback self-test with separate_tx_channels=1
sfc: Fix MCDI structure field lookup
sfc: Add parentheses around use of bitfield macro arguments
sfc: Fix null function pointer in efx_sriov_channel_type
vxlan: virtual extensible lan
igmp: export symbol ip_mc_leave_group
netlink: add attributes to fdb interface
tg3: unconditionally select HWMON support when tg3 is enabled.
Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
gre: fix sparse warning
...
Make the session keyring per-thread rather than per-process, but still
inherited from the parent thread to solve a problem with PAM and gdm.
The problem is that join_session_keyring() will reject attempts to change the
session keyring of a multithreaded program but gdm is now multithreaded before
it gets to the point of starting PAM and running pam_keyinit to create the
session keyring. See:
https://bugs.freedesktop.org/show_bug.cgi?id=49211
The reason that join_session_keyring() will only change the session keyring
under a single-threaded environment is that it's hard to alter the other
thread's credentials to effect the change in a multi-threaded program. The
problems are such as:
(1) How to prevent two threads both running join_session_keyring() from
racing.
(2) Another thread's credentials may not be modified directly by this process.
(3) The number of threads is uncertain whilst we're not holding the
appropriate spinlock, making preallocation slightly tricky.
(4) We could use TIF_NOTIFY_RESUME and key_replace_session_keyring() to get
another thread to replace its keyring, but that means preallocating for
each thread.
A reasonable way around this is to make the session keyring per-thread rather
than per-process and just document that if you want a common session keyring,
you must get it before you spawn any threads - which is the current situation
anyway.
Whilst we're at it, we can the process keyring behave in the same way. This
means we can clean up some of the ickyness in the creds code.
Basically, after this patch, the session, process and thread keyrings are about
inheritance rules only and not about sharing changes of keyring.
Reported-by: Mantas M. <grawity@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ray Strode <rstrode@redhat.com>
Pull user namespace changes from Eric Biederman:
"This is a mostly modest set of changes to enable basic user namespace
support. This allows the code to code to compile with user namespaces
enabled and removes the assumption there is only the initial user
namespace. Everything is converted except for the most complex of the
filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
nfs, ocfs2 and xfs as those patches need a bit more review.
The strategy is to push kuid_t and kgid_t values are far down into
subsystems and filesystems as reasonable. Leaving the make_kuid and
from_kuid operations to happen at the edge of userspace, as the values
come off the disk, and as the values come in from the network.
Letting compile type incompatible compile errors (present when user
namespaces are enabled) guide me to find the issues.
The most tricky areas have been the places where we had an implicit
union of uid and gid values and were storing them in an unsigned int.
Those places were converted into explicit unions. I made certain to
handle those places with simple trivial patches.
Out of that work I discovered we have generic interfaces for storing
quota by projid. I had never heard of the project identifiers before.
Adding full user namespace support for project identifiers accounts
for most of the code size growth in my git tree.
Ultimately there will be work to relax privlige checks from
"capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
root in a user names to do those things that today we only forbid to
non-root users because it will confuse suid root applications.
While I was pushing kuid_t and kgid_t changes deep into the audit code
I made a few other cleanups. I capitalized on the fact we process
netlink messages in the context of the message sender. I removed
usage of NETLINK_CRED, and started directly using current->tty.
Some of these patches have also made it into maintainer trees, with no
problems from identical code from different trees showing up in
linux-next.
After reading through all of this code I feel like I might be able to
win a game of kernel trivial pursuit."
Fix up some fairly trivial conflicts in netfilter uid/git logging code.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
userns: Convert the ufs filesystem to use kuid/kgid where appropriate
userns: Convert the udf filesystem to use kuid/kgid where appropriate
userns: Convert ubifs to use kuid/kgid
userns: Convert squashfs to use kuid/kgid where appropriate
userns: Convert reiserfs to use kuid and kgid where appropriate
userns: Convert jfs to use kuid/kgid where appropriate
userns: Convert jffs2 to use kuid and kgid where appropriate
userns: Convert hpfs to use kuid and kgid where appropriate
userns: Convert btrfs to use kuid/kgid where appropriate
userns: Convert bfs to use kuid/kgid where appropriate
userns: Convert affs to use kuid/kgid wherwe appropriate
userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
userns: On ia64 deal with current_uid and current_gid being kuid and kgid
userns: On ppc convert current_uid from a kuid before printing.
userns: Convert s390 getting uid and gid system calls to use kuid and kgid
userns: Convert s390 hypfs to use kuid and kgid where appropriate
userns: Convert binder ipc to use kuids
userns: Teach security_path_chown to take kuids and kgids
userns: Add user namespace support to IMA
userns: Convert EVM to deal with kuids and kgids in it's hmac computation
...
Pull cgroup hierarchy update from Tejun Heo:
"Currently, different cgroup subsystems handle nested cgroups
completely differently. There's no consistency among subsystems and
the behaviors often are outright broken.
People at least seem to agree that the broken hierarhcy behaviors need
to be weeded out if any progress is gonna be made on this front and
that the fallouts from deprecating the broken behaviors should be
acceptable especially given that the current behaviors don't make much
sense when nested.
This patch makes cgroup emit warning messages if cgroups for
subsystems with broken hierarchy behavior are nested to prepare for
fixing them in the future. This was put in a separate branch because
more related changes were expected (didn't make it this round) and the
memory cgroup wanted to pull in this and make changes on top."
* 'for-3.7-hierarchy' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: mark subsystems with broken hierarchy support and whine if cgroups are nested for them
Pull cgroup updates from Tejun Heo:
- xattr support added. The implementation is shared with tmpfs. The
usage is restricted and intended to be used to manage per-cgroup
metadata by system software. tmpfs changes are routed through this
branch with Hugh's permission.
- cgroup subsystem ID handling simplified.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Define CGROUP_SUBSYS_COUNT according the configuration
cgroup: Assign subsystem IDs during compile time
cgroup: Do not depend on a given order when populating the subsys array
cgroup: Wrap subsystem selection macro
cgroup: Remove CGROUP_BUILTIN_SUBSYS_COUNT
cgroup: net_prio: Do not define task_netpioidx() when not selected
cgroup: net_cls: Do not define task_cls_classid() when not selected
cgroup: net_cls: Move sock_update_classid() declaration to cls_cgroup.h
cgroup: trivial fixes for Documentation/cgroups/cgroups.txt
xattr: mark variable as uninitialized to make both gcc and smatch happy
fs: add missing documentation to simple_xattr functions
cgroup: add documentation on extended attributes usage
cgroup: rename subsys_bits to subsys_mask
cgroup: add xattr support
cgroup: revise how we re-populate root directory
xattr: extract simple_xattr code from tmpfs
Pull workqueue changes from Tejun Heo:
"This is workqueue updates for v3.7-rc1. A lot of activities this
round including considerable API and behavior cleanups.
* delayed_work combines a timer and a work item. The handling of the
timer part has always been a bit clunky leading to confusing
cancelation API with weird corner-case behaviors. delayed_work is
updated to use new IRQ safe timer and cancelation now works as
expected.
* Another deficiency of delayed_work was lack of the counterpart of
mod_timer() which led to cancel+queue combinations or open-coded
timer+work usages. mod_delayed_work[_on]() are added.
These two delayed_work changes make delayed_work provide interface
and behave like timer which is executed with process context.
* A work item could be executed concurrently on multiple CPUs, which
is rather unintuitive and made flush_work() behavior confusing and
half-broken under certain circumstances. This problem doesn't
exist for non-reentrant workqueues. While non-reentrancy check
isn't free, the overhead is incurred only when a work item bounces
across different CPUs and even in simulated pathological scenario
the overhead isn't too high.
All workqueues are made non-reentrant. This removes the
distinction between flush_[delayed_]work() and
flush_[delayed_]_work_sync(). The former is now as strong as the
latter and the specified work item is guaranteed to have finished
execution of any previous queueing on return.
* In addition to the various bug fixes, Lai redid and simplified CPU
hotplug handling significantly.
* Joonsoo introduced system_highpri_wq and used it during CPU
hotplug.
There are two merge commits - one to pull in IRQ safe timer from
tip/timers/core and the other to pull in CPU hotplug fixes from
wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."
Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.
Tejun pointed out a few of them, I fixed a couple more.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
workqueue: remove @delayed from cwq_dec_nr_in_flight()
workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
workqueue: use __cpuinit instead of __devinit for cpu callbacks
workqueue: rename manager_mutex to assoc_mutex
workqueue: WORKER_REBIND is no longer necessary for idle rebinding
workqueue: WORKER_REBIND is no longer necessary for busy rebinding
workqueue: reimplement idle worker rebinding
workqueue: deprecate __cancel_delayed_work()
workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
workqueue: use mod_delayed_work() instead of __cancel + queue
workqueue: use irqsafe timer for delayed_work
workqueue: clean up delayed_work initializers and add missing one
workqueue: make deferrable delayed_work initializer names consistent
workqueue: cosmetic whitespace updates for macro definitions
workqueue: deprecate system_nrt[_freezable]_wq
workqueue: deprecate flush[_delayed]_work_sync()
...
This fixes two issues that could cause incompatibility between
kernel versions:
- If a tracer uses SECCOMP_RET_TRACE to select a syscall number
higher than the largest known syscall, emulate the unknown
vsyscall by returning -ENOSYS. (This is unlikely to make a
noticeable difference on x86-64 due to the way the system call
entry works.)
- On x86-64 with vsyscall=emulate, skipped vsyscalls were buggy.
This updates the documentation accordingly.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Will Drewry <wad@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
As we skipped the merge window for 3.6-rc1 for the tty tree, everything
is now settled down and working properly, so we are ready for 3.7-rc1.
Here's the patchset, it's big, but the large changes are removing a
firmware file and adding a staging tty driver (it depended on the tty
core changes, so it's going through this tree instead of the staging
tree.)
All of these patches have been in the linux-next tree for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlBp36oACgkQMUfUDdst+yk4WgCdEy13hot8fI2Lqnc7W0LKu7GX
4p8AoLTjzrXhLosxdijskDQ9X1OtjrxU
=S5Ng
-----END PGP SIGNATURE-----
Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY changes from Greg Kroah-Hartman:
"As we skipped the merge window for 3.6-rc1 for the tty tree,
everything is now settled down and working properly, so we are ready
for 3.7-rc1. Here's the patchset, it's big, but the large changes are
removing a firmware file and adding a staging tty driver (it depended
on the tty core changes, so it's going through this tree instead of
the staging tree.)
All of these patches have been in the linux-next tree for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up more-or-less trivial conflicts in
- drivers/char/pcmcia/synclink_cs.c:
tty NULL dereference fix vs tty_port_cts_enabled() helper function
- drivers/staging/{Kconfig,Makefile}:
add-add conflict (dgrp driver added close to other staging drivers)
- drivers/staging/ipack/devices/ipoctal.c:
"split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"
* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
tty/serial: Add kgdb_nmi driver
tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
tty/serial/amba-pl011: Implement poll_init callback
tty/serial/core: Introduce poll_init callback
kdb: Turn KGDB_KDB=n stubs into static inlines
kdb: Implement disable_nmi command
kernel/debug: Mask KGDB NMI upon entry
serial: pl011: handle corruption at high clock speeds
serial: sccnxp: Make 'default' choice in switch last
serial: sccnxp: Remove mask termios caps for SW flow control
serial: sccnxp: Report actual baudrate back to core
serial: samsung: Add poll_get_char & poll_put_char
Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
Powerpc 8xx CPM_UART maxidl should not depend on fifo size
Powerpc 8xx CPM_UART too many interrupts
Powerpc 8xx CPM_UART desynchronisation
serial: set correct baud_base for EXSYS EX-41092 Dual 16950
serial: omap: fix the reciever line error case
8250: blacklist Winbond CIR port
8250_pnp: do pnp probe before legacy probe
...
Features currently supported:
- 39-bit address space for user and kernel (each)
- 4KB and 64KB page configurations
- Compat (32-bit) user applications (ARMv7, EABI only)
- Flattened Device Tree (mandated for all AArch64 platforms)
- ARM generic timers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=buJB
-----END PGP SIGNATURE-----
Merge tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 support from Catalin Marinas:
"Linux support for the 64-bit ARM architecture (AArch64)
Features currently supported:
- 39-bit address space for user and kernel (each)
- 4KB and 64KB page configurations
- Compat (32-bit) user applications (ARMv7, EABI only)
- Flattened Device Tree (mandated for all AArch64 platforms)
- ARM generic timers"
* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (35 commits)
arm64: ptrace: remove obsolete ptrace request numbers from user headers
arm64: Do not set the SMP/nAMP processor bit
arm64: MAINTAINERS update
arm64: Build infrastructure
arm64: Miscellaneous header files
arm64: Generic timers support
arm64: Loadable modules
arm64: Miscellaneous library functions
arm64: Performance counters support
arm64: Add support for /proc/sys/debug/exception-trace
arm64: Debugging support
arm64: Floating point and SIMD
arm64: 32-bit (compat) applications support
arm64: User access library functions
arm64: Signal handling support
arm64: VDSO support
arm64: System calls handling
arm64: ELF definitions
arm64: SMP support
arm64: DMA mapping API
...
Pull x86/asm changes from Ingo Molnar:
"The one change that stands out is the alternatives patching change
that prevents us from ever patching back instructions from SMP to UP:
this simplifies things and speeds up CPU hotplug.
Other than that it's smaller fixes, cleanups and improvements."
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Unspaghettize do_trap()
x86_64: Work around old GAS bug
x86: Use REP BSF unconditionally
x86: Prefer TZCNT over BFS
x86/64: Adjust types of temporaries used by ffs()/fls()/fls64()
x86: Drop unnecessary kernel_eflags variable on 64-bit
x86/smp: Don't ever patch back to UP if we unplug cpus
Pull scheduler changes from Ingo Molnar:
"Continued quest to clean up and enhance the cputime code by Frederic
Weisbecker, in preparation for future tickless kernel features.
Other than that, smallish changes."
Fix up trivial conflicts due to additions next to each other in arch/{x86/}Kconfig
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
cputime: Make finegrained irqtime accounting generally available
cputime: Gather time/stats accounting config options into a single menu
ia64: Reuse system and user vtime accounting functions on task switch
ia64: Consolidate user vtime accounting
vtime: Consolidate system/idle context detection
cputime: Use a proper subsystem naming for vtime related APIs
sched: cpu_power: enable ARCH_POWER
sched/nohz: Clean up select_nohz_load_balancer()
sched: Fix load avg vs. cpu-hotplug
sched: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW
sched: Fix nohz_idle_balance()
sched: Remove useless code in yield_to()
sched: Add time unit suffix to sched sysctl knobs
sched/debug: Limit sd->*_idx range on sysctl
sched: Remove AFFINE_WAKEUPS feature flag
s390: Remove leftover account_tick_vtime() header
cputime: Consolidate vtime handling on context switch
sched: Move cputime code to its own file
cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING
tile: Remove SD_PREFER_LOCAL leftover
...
Pull perf update from Ingo Molnar:
"Lots of changes in this cycle as well, with hundreds of commits from
over 30 contributors. Most of the activity was on the tooling side.
Higher level changes:
- New 'perf kvm' analysis tool, from Xiao Guangrong.
- New 'perf trace' system-wide tracing tool
- uprobes fixes + cleanups from Oleg Nesterov.
- Lots of patches to make perf build on Android out of box, from
Irina Tirdea
- Extend ftrace function tracing utility to be more dynamic for its
users. It allows for data passing to the callback functions, as
well as reading regs as if a breakpoint were to trigger at function
entry.
The main goal of this patch series was to allow kprobes to use
ftrace as an optimized probe point when a probe is placed on an
ftrace nop. With lots of help from Masami Hiramatsu, and going
through lots of iterations, we finally came up with a good
solution.
- Add cpumask for uncore pmu, use it in 'stat', from Yan, Zheng.
- Various tracing updates from Steve Rostedt
- Clean up and improve 'perf sched' performance by elliminating lots
of needless calls to libtraceevent.
- Event group parsing support, from Jiri Olsa
- UI/gtk refactorings and improvements from Namhyung Kim
- Add support for non-tracepoint events in perf script python, from
Feng Tang
- Add --symbols to 'script', similar to the one in 'report', from
Feng Tang.
Infrastructure enhancements and fixes:
- Convert the trace builtins to use the growing evsel/evlist
tracepoint infrastructure, removing several open coded constructs
like switch like series of strcmp to dispatch events, etc.
Basically what had already been showcased in 'perf sched'.
- Add evsel constructor for tracepoints, that uses libtraceevent just
to parse the /format events file, use it in a new 'perf test' to
make sure the libtraceevent format parsing regressions can be more
readily caught.
- Some strange errors were happening in some builds, but not on the
next, reported by several people, problem was some parser related
files, generated during the build, didn't had proper make deps, fix
from Eric Sandeen.
- Introduce struct and cache information about the environment where
a perf.data file was captured, from Namhyung Kim.
- Fix handling of unresolved samples when --symbols is used in
'report', from Feng Tang.
- Add union member access support to 'probe', from Hyeoncheol Lee.
- Fixups to die() removal, from Namhyung Kim.
- Render fixes for the TUI, from Namhyung Kim.
- Don't enable annotation in non symbolic view, from Namhyung Kim.
- Fix pipe mode in 'report', from Namhyung Kim.
- Move related stats code from stat to util/, will be used by the
'stat' kvm tool, from Xiao Guangrong.
- Remove die()/exit() calls from several tools.
- Resolve vdso callchains, from Jiri Olsa
- Don't pass const char pointers to basename, so that we can
unconditionally use libgen.h and thus avoid ifdef BIONIC lines,
from David Ahern
- Refactor hist formatting so that it can be reused with the GTK
browser, From Namhyung Kim
- Fix build for another rbtree.c change, from Adrian Hunter.
- Make 'perf diff' command work with evsel hists, from Jiri Olsa.
- Use the only field_sep var that is set up: symbol_conf.field_sep,
fix from Jiri Olsa.
- .gitignore compiled python binaries, from Namhyung Kim.
- Get rid of die() in more libtraceevent places, from Namhyung Kim.
- Rename libtraceevent 'private' struct member to 'priv' so that it
works in C++, from Steven Rostedt
- Remove lots of exit()/die() calls from tools so that the main perf
exit routine can take place, from David Ahern
- Fix x86 build on x86-64, from David Ahern.
- {int,str,rb}list fixes from Suzuki K Poulose
- perf.data header fixes from Namhyung Kim
- Allow user to indicate objdump path, needed in cross environments,
from Maciek Borzecki
- Fix hardware cache event name generation, fix from Jiri Olsa
- Add round trip test for sw, hw and cache event names, catching the
problem Jiri fixed, after Jiri's patch, the test passes
successfully.
- Clean target should do clean for lib/traceevent too, fix from David
Ahern
- Check the right variable for allocation failure, fix from Namhyung
Kim
- Set up evsel->tp_format regardless of evsel->name being set
already, fix from Namhyung Kim
- Oprofile fixes from Robert Richter.
- Remove perf_event_attr needless version inflation, from Jiri Olsa
- Introduce libtraceevent strerror like error reporting facility,
from Namhyung Kim
- Add pmu mappings to perf.data header and use event names from cmd
line, from Robert Richter
- Fix include order for bison/flex-generated C files, from Ben
Hutchings
- Build fixes and documentation corrections from David Ahern
- Assorted cleanups from Robert Richter
- Let O= makes handle relative paths, from Steven Rostedt
- perf script python fixes, from Feng Tang.
- Initial bash completion support, from Frederic Weisbecker
- Allow building without libelf, from Namhyung Kim.
- Support DWARF CFI based unwind to have callchains when %bp based
unwinding is not possible, from Jiri Olsa.
- Symbol resolution fixes, while fixing support PPC64 files with an
.opt ELF section was the end goal, several fixes for code that
handles all architectures and cleanups are included, from Cody
Schafer.
- Assorted fixes for Documentation and build in 32 bit, from Robert
Richter
- Cache the libtraceevent event_format associated to each evsel
early, so that we avoid relookups, i.e. calling pevent_find_event
repeatedly when processing tracepoint events.
[ This is to reduce the surface contact with libtraceevents and
make clear what is that the perf tools needs from that lib: so
far parsing the common and per event fields. ]
- Don't stop the build if the audit libraries are not installed, fix
from Namhyung Kim.
- Fix bfd.h/libbfd detection with recent binutils, from Markus
Trippelsdorf.
- Improve warning message when libunwind devel packages not present,
from Jiri Olsa"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits)
perf trace: Add aliases for some syscalls
perf probe: Print an enum type variable in "enum variable-name" format when showing accessible variables
perf tools: Check libaudit availability for perf-trace builtin
perf hists: Add missing period_* fields when collapsing a hist entry
perf trace: New tool
perf evsel: Export the event_format constructor
perf evsel: Introduce rawptr() method
perf tools: Use perf_evsel__newtp in the event parser
perf evsel: The tracepoint constructor should store sys:name
perf evlist: Introduce set_filter() method
perf evlist: Renane set_filters method to apply_filters
perf test: Add test to check we correctly parse and match syscall open parms
perf evsel: Handle endianity in intval method
perf evsel: Know if byte swap is needed
perf tools: Allow handling a NULL cpu_map as meaning "all cpus"
perf evsel: Improve tracepoint constructor setup
tools lib traceevent: Fix error path on pevent_parse_event
perf test: Fix build failure
trace: Move trace event enable from fs_initcall to core_initcall
tracing: Add an option for disabling markers
...
Pull core locking changes from Ingo Molnar:
"It includes a lockdep improvement plus a spinlock inlining Kconfig
cleanup."
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Adjust spin lock inlining Kconfig options
lockdep: Check if nested lock is actually held
Pull core kernel fixes from Ingo Molnar:
"This is a complex task_work series from Oleg that fixes the bug that
this VFS commit tried to fix:
d35abdb288 hold task_lock around checks in keyctl
but solves the problem without the lockup regression that d35abdb288
introduced in v3.6.
This series came late in v3.6 and I did not feel confident about it so
late in the cycle. Might be worth backporting to -stable if it proves
itself upstream."
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
task_work: Simplify the usage in ptrace_notify() and get_signal_to_deliver()
task_work: Revert "hold task_lock around checks in keyctl"
task_work: task_work_add() should not succeed after exit_task_work()
task_work: Make task_work_add() lockless
Make default just return 0. The current default (checking
TIF_POLLING_NRFLAG) is taken to architectures that need it;
ones that don't do polling in their idle threads don't need
to defined TIF_POLLING_NRFLAG at all.
ia64 defined both TS_POLLING (used by its tsk_is_polling())
and TIF_POLLING_NRFLAG (not used at all). Killed the latter...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Let architectures select GENERIC_KERNEL_THREAD and have their copy_thread()
treat NULL regs as "it came from kernel_thread(), sp argument contains
the function new thread will be calling and stack_size - the argument for
that function". Switching the architectures begins shortly...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
After the previous change is_swbp_at_addr() is always called with
current->mm. Remove this check and move it close to its single caller.
Also, remove the obsolete comment about is_swbp_at_addr() and
uprobe_state.count.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Unlike set_swbp(), set_orig_insn()->is_swbp_at_addr() makes sense,
although it can't prevent all confusions.
But the usage of is_swbp_at_addr() is equally confusing, and it adds
the extra get_user_pages() we can avoid.
This patch removes set_orig_insn()->is_swbp_at_addr() but changes
write_opcode() to do the necessary checks before replace_page().
Perhaps it also makes sense to ensure PAGE_MAPPING_ANON in unregister
case.
find_active_uprobe() becomes the only user of is_swbp_at_addr(),
we can change its semantics.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
No functional changes, preparations.
1. Extract the kmap-and-memcpy code from read_opcode() into the
new trivial helper, copy_opcode(). The next patch will add
another user.
2. read_opcode() becomes really trivial, fold it into its single
caller, is_swbp_at_addr().
3. Remove "auprobe" argument from write_opcode(), it is not used
since f403072c6.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
A separate patch for better documentation.
set_swbp()->is_swbp_at_addr() is not needed for correctness, it is
harmless to do the unnecessary __replace_page(old_page, new_page)
when these 2 pages are identical.
And it can not be counted as optimization. mmap/register races are
very unlikely, while in the likely case is_swbp_at_addr() adds the
extra get_user_pages() even if the caller is uprobe_mmap(current->mm)
and returns false.
Note also that the semantics/usage of is_swbp_at_addr() in uprobe.c
is confusing. set_swbp() uses it to detect the case when this insn
was already modified by uprobes, that is why it should always compare
the opcode with UPROBE_SWBP_INSN even if the hardware (like powerpc)
has other trap insns. It doesn't matter if this breakpoint was in fact
installed by gdb or application itself, we are going to "steal" this
breakpoint anyway and execute the original insn from vm_file even if
it no longer matches the memory.
OTOH, handle_swbp()->find_active_uprobe() uses is_swbp_at_addr() to
figure out whether we need to send SIGTRAP or not if we can not find
uprobe, so in this case it should return true for all trap variants,
not only for UPROBE_SWBP_INSN.
This patch removes set_swbp()->is_swbp_at_addr(), the next patches
will remove it from set_orig_insn() which is similar to set_swbp()
in this respect. So the only caller will be handle_swbp() and we
can make its semantics clear.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
valid_vma(false) ignores ->vm_flags, this is not actually right.
We should never try to write into MAP_SHARED mapping, this can
confuse an apllication which actually writes to ->vm_file.
With this patch valid_vma(false) ignores VM_WRITE only but checks
other (immutable) bits checked by valid_vma(true). This can also
speedup uprobe_munmap() and uprobe_unregister().
Note: even after this patch _unregister can confuse the probed
application if it does mprotect(PROT_WRITE) after _register and
installs "int3", but this is hardly possible to avoid and this
doesn't differ from gdb case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
uprobe_register() or uprobe_mmap() requires VM_READ | VM_EXEC, this
is not right. An apllication can do mprotect(PROT_EXEC) later and
execute this code.
Change valid_vma(is_register => true) to check VM_MAYEXEC instead.
No need to check VM_MAYREAD, it is always set.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
write_opcode()->get_user_pages() needs FOLL_FORCE to ensure we can
read the page even if the probed task did mprotect(PROT_NONE) after
uprobe_register(). Without FOLL_WRITE, FOLL_FORCE doesn't have any
side effect but allows to read the !VM_READ memory.
Otherwiese the subsequent uprobe_unregister()->set_orig_insn() fails
and we leak "int3". If that task does mprotect(PROT_READ | EXEC) and
execute the probed insn later it will be killed.
Note: in fact this is also needed for _register, see the next patch.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Kill UTASK_BP_HIT state, it buys nothing but complicates the code.
It is only used in uprobe_notify_resume() to decide who should be
called, we can check utask->active_uprobe != NULL instead. And this
allows us to simplify handle_swbp(), no need to clear utask->state.
Likewise we could kill UTASK_SSTEP, but UTASK_BP_HIT is worse and
imho should die. The problem is, it creates the special case when
task->utask is NULL, we can't distinguish RUNNING and BP_HIT. With
this patch utask == NULL always means RUNNING.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
If handle_swbp()->add_utask() fails but UPROBE_SKIP_SSTEP is set,
cleanup_ret: path do not restart the insn, this is wrong. Remove
this check and add the additional label for can_skip_sstep() = T
case.
Note also that UPROBE_SKIP_SSTEP can be false positive, we simply
can not trust it unless arch_uprobe_skip_sstep() was already called.
Also, move another UPROBE_SKIP_SSTEP check before can_skip_sstep()
into this helper, this looks more clean and understandable.
Note: probably we should rename "skip" to "emulate" and I think
that "clear UPROBE_SKIP_SSTEP" should be moved to arch_can_skip.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
handle_swbp() sets utask->active_uprobe before handler_chain(),
and UTASK_SSTEP before pre_ssout(). This complicates the code
for no reason, arch_ hooks or consumer->handler() should not
(and can't) use this info.
Change handle_swbp() to initialize them after pre_ssout(), and
remove the no longer needed cleanup-utask code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
cked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
If handle_swbp()->find_active_uprobe() fails we return with
utask->state = UTASK_BP_HIT.
Change handle_swbp() to reset utask->state at the start. Note
that we do this unconditionally, see the next patch(es).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Conflicts:
drivers/net/team/team.c
drivers/net/usb/qmi_wwan.c
net/batman-adv/bat_iv_ogm.c
net/ipv4/fib_frontend.c
net/ipv4/route.c
net/l2tp/l2tp_netlink.c
The team, fib_frontend, route, and l2tp_netlink conflicts were simply
overlapping changes.
qmi_wwan and bat_iv_ogm were of the "use HEAD" variety.
With help from Antonio Quartulli.
Signed-off-by: David S. Miller <davem@davemloft.net>
Use generic steal operation on pipe buffer to allow stealing
ring buffer's read page from pipe buffer.
Note that this could reduce the performance of splice on the
splice_write side operation without affinity setting.
Since the ring buffer's read pages are allocated on the
tracing-node, but the splice user does not always execute
splice write side operation on the same node. In this case,
the page will be accessed from the another node.
Thus, it is strongly recommended to assign the splicing
thread to corresponding node.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The original module-init-tools module loader used a fnctl lock on the
.ko file to avoid attempts to simultaneously load a module.
Unfortunately, you can't get an exclusive fcntl lock on a read-only
fd, making this not work for read-only mounted filesystems.
module-init-tools has a hacky sleep-and-loop for this now.
It's not that hard to wait in the kernel, and only return -EEXIST once
the first module has finished loading (or continue loading the module
if the first one failed to initialize for some reason). It's also
consistent with what we do for dependent modules which are still loading.
Suggested-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use resolve_symbol_wait(), which blocks if the module containing
the symbol is still loading. However:
1) The module_wq we use is only woken after calling the modules' init
function, but there are other failure paths after the module is
placed in the linked list where we need to do the same thing.
2) wake_up() only wakes one waiter, and our waitqueue is shared by all
modules, so we need to wake them all.
3) wake_up_all() doesn't imply a memory barrier: I feel happier calling
it after we've grabbed and dropped the module_mutex, not just after
the state assignment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela,
ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version
into asm-generic/module.h for all arches bar MIPS.
Also, use the generic definition mod_arch_specific where possible.
To this end, I've defined three new config bools:
(*) HAVE_MOD_ARCH_SPECIFIC
Arches define this if they don't want to use the empty generic
mod_arch_specific struct.
(*) MODULES_USE_ELF_RELA
Arches define this if their modules can contain RELA records. This causes
the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be
defined by the arch rather than have the core emit an error message.
(*) MODULES_USE_ELF_REL
Arches define this if their modules can contain REL records. This causes
the Elf_Rel mapping to be emitted and allows apply_relocate() to be
defined by the arch rather than have the core emit an error message.
Note that it is possible to allow both REL and RELA records: m68k and mips are
two arches that do this.
With this, some arch asm/module.h files can be deleted entirely and replaced
with a generic-y marker in the arch Kbuild file.
Additionally, I have removed the bits from m32r and score that handle the
unsupported type of relocation record as that's now handled centrally.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cloudlinux have a product called lve that includes a kernel module. This
was previously GPLed but is now under a proprietary license, but the
module continues to declare MODULE_LICENSE("GPL") and makes use of some
EXPORT_SYMBOL_GPL symbols. Forcibly taint it in order to avoid this.
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Alex Lyashkov <umka@cloudlinux.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iQEcBAABAgAGBQJQX7MuAAoJEHm+PkMAQRiG0h0IAJURkrMCAQUxA+Ik66ReH89s
LQcVd0U9uL4UUOi7f5WR64Vf9Cfu6VVGX9ZKSvjpNskvlQaUQPMIt4pMe6g4X4dI
u0bApEy4XZz3nGabUAghIU8jJ8cDmhCG6kPpSiS7pi7KHc0yIa4WFtJRrIpGaIWT
xuK38YOiOHcSDRlLyWZzainMncQp/ixJdxnqVMTonkVLk0q0b84XzOr4/qlLE5lU
i+TsK3PRKdQXgvZ4CebL+srPBwWX1dmgP3VkeBloQbSSenSeELICbFWavn2ml+sF
GXi4dO93oNquL/Oy5SwI666T4uNcrRPaS+5X+xSZgBW/y2aQVJVJuNZg6ZP/uWk=
=0v2l
-----END PGP SIGNATURE-----
Merge tag 'v3.6-rc7' into next
Linux 3.6-rc7
Requested by David Howells so he can merge his key susbsystem work into
my tree with requisite -linus changesets.
descriptor-related parts of daemonize, done right. As the
result we simplify the locking rules for ->files - we
hold task_lock in *all* cases when we modify ->files.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This command disables NMI-entry. If NMI source has been previously shared
with a serial console ("debug port"), this effectively releases the port
from KDB exclusive use, and makes the console available for normal use.
Of course, NMI can be reenabled, enable_nmi modparam is used for that:
echo 1 > /sys/module/kdb/parameters/enable_nmi
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new arch callback should manage NMIs that usually cause KGDB to
enter. That is, not all NMIs should be enabled/disabled, but only
those that issue kgdb_handle_exception().
We must mask it as serial-line interrupt can be used as an NMI, so
if the original KGDB-entry cause was say a breakpoint, then every
input to KDB console will cause KGDB to reenter, which we don't want.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checking "user" before "is_idle_task()" allows better optimizations
in cases where inlining is possible. Also, "bool" should be passed
"true" or "false" rather than "1" or "0". This commit therefore makes
these changes, as noted in Josh's review.
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Provide a config option that enables the userspace
RCU extended quiescent state on every CPUs by default.
This is for testing purpose.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
When exceptions or irq are about to resume userspace, if
the task needs to be rescheduled, the arch low level code
calls schedule() directly.
If we call it, it is because we have the TIF_RESCHED flag:
- It can be set after random local calls to set_need_resched()
(RCU, drm, ...)
- A wake up happened and the CPU needs preemption. This can
happen in several ways:
* Remotely: the remote waking CPU has set TIF_RESCHED and send the
wakee an IPI to schedule the new task.
* Remotely enqueued: the remote waking CPU sends an IPI to the target
and the wake up is made by the target.
* Locally: waking CPU == wakee CPU and the wakeup is done locally.
set_need_resched() is called without IPI.
In the case of local and remotely enqueued wake ups, the tick can
be restarted when we enqueue the new task and RCU can exit the
extended quiescent state at the same time. Then by the time we reach
irq exit path and we call schedule, we are not in RCU user mode.
But if we call schedule() only because something called set_need_resched(),
RCU may still be in user mode when we reach schedule.
Also if a wake up is done remotely, the CPU might see the TIF_RESCHED
flag and call schedule while the IPI has not yet happen to restart the
tick and exit RCU user mode.
We need to manually protect against these corner cases.
Create a new API schedule_user() that calls schedule() inside
rcu_user_exit()-rcu_user_enter() in order to protect it. Archs
will need to rely on it now to implement user preemption safely.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
When an exception or an irq exits, and we are going to resume into
interrupted kernel code, the low level architecture code calls
preempt_schedule_irq() if there is a need to reschedule.
If the interrupt/exception occured between a call to rcu_user_enter()
(from syscall exit, exception exit, do_notify_resume exit, ...) and
a real resume to userspace (iret,...), preempt_schedule_irq() can be
called whereas RCU thinks we are in userspace. But preempt_schedule_irq()
is going to run kernel code and may be some RCU read side critical
section. We must exit the userspace extended quiescent state before
we call it.
To solve this, just call rcu_user_exit() in the beginning of
preempt_schedule_irq().
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Clear the syscalls hook of a task when it's scheduled out so that if
the task migrates, it doesn't run the syscall slow path on a CPU
that might not need it.
Also set the syscalls hook on the next task if needed.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
By default we don't want to enter into RCU extended quiescent
state while in userspace because doing this produces some overhead
(eg: use of syscall slowpath). Set it off by default and ready to
run when some feature like adaptive tickless need it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Allow calls to rcu_user_enter() even if we are already
in userspace (as seen by RCU) and allow calls to rcu_user_exit()
even if we are already in the kernel.
This makes the APIs more flexible to be called from architectures.
Exception entries for example won't need to know if they come from
userspace before calling rcu_user_exit().
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Create a new config option under the RCU menu that put
CPUs under RCU extended quiescent state (as in dynticks
idle mode) when they run in userspace. This require
some contribution from architectures to hook into kernel
and userspace boundaries.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The current implementation of RCU_FAST_NO_HZ tries reasonably hard to rid
the current CPU of RCU callbacks. This is appropriate when the CPU is
entering idle, where it doesn't have much useful to do anyway, but is most
definitely not what you want when transitioning to user-mode execution.
This commit therefore detects the adaptive-tick case, and refrains from
burning CPU time getting rid of RCU callbacks in that case.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
