Commit Graph

156 Commits

Author SHA1 Message Date
Nick Piggin
fa0d7e3de6 fs: icache RCU free inodes
RCU free the struct inode. This will allow:

- Subsequent store-free path walking patch. The inode must be consulted for
  permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
  to take i_lock no longer need to take sb_inode_list_lock to walk the list in
  the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
  page lock to follow page->mapping.

The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.

In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.

The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:26 +11:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Al Viro
51139adac9 convert get_sb_pseudo() users
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:33 -04:00
Nick Piggin
7ccf19a804 fs: inode split IO and LRU lists
The use of the same inode list structure (inode->i_list) for two
different list constructs with different lifecycles and purposes
makes it impossible to separate the locking of the different
operations. Therefore, to enable the separation of the locking of
the writeback and reclaim lists, split the inode->i_list into two
separate lists dedicated to their specific tracking functions.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:15 -04:00
Dave Chinner
a5491e0c7b fs: switch bdev inode bdi's correctly
bdev inodes can remain dirty even after their last close. Hence the
BDI associated with the bdev->inode gets modified duringthe last
close to point to the default BDI. However, the bdev inode still
needs to be moved to the dirty lists of the new BDI, otherwise it
will corrupt the writeback list is was left on.

Add a new function bdev_inode_switch_bdi() to move all the bdi state
from the old bdi to the new one safely. This is only a temporary
measure until the bdev inode<->bdi lifecycle problems are sorted
out.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:14 -04:00
Al Viro
7de9c6ee3e new helper: ihold()
Clones an existing reference to inode; caller must already hold one.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:11 -04:00
Christoph Hellwig
dd3932eddf block: remove BLKDEV_IFL_WAIT
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller.  To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead.  So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout.  For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 20:52:58 +02:00
Chris Wright
b7300b78d1 blkdev: cgroup whitelist permission fix
The cgroup device whitelist code gets confused when trying to grant
permission to a disk partition that is not currently open.  Part of
blkdev_open() includes __blkdev_get() on the whole disk.

Basically, the only ways to reliably allow a cgroup access to a partition
on a block device when using the whitelist are to 1) also give it access
to the whole block device or 2) make sure the partition is already open in
a different context.

The patch avoids the cgroup check for the whole disk case when opening a
partition.

Addresses https://bugzilla.redhat.com/show_bug.cgi?id=589662

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Serge E. Hallyn <serue@us.ibm.com>
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:18 -07:00
Linus Torvalds
2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
Linus Torvalds
5f248c9c25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
  no need for list_for_each_entry_safe()/resetting with superblock list
  Fix sget() race with failing mount
  vfs: don't hold s_umount over close_bdev_exclusive() call
  sysv: do not mark superblock dirty on remount
  sysv: do not mark superblock dirty on mount
  btrfs: remove junk sb_dirt change
  BFS: clean up the superblock usage
  AFFS: wait for sb synchronization when needed
  AFFS: clean up dirty flag usage
  cifs: truncate fallout
  mbcache: fix shrinker function return value
  mbcache: Remove unused features
  add f_flags to struct statfs(64)
  pass a struct path to vfs_statfs
  update VFS documentation for method changes.
  All filesystems that need invalidate_inode_buffers() are doing that explicitly
  convert remaining ->clear_inode() to ->evict_inode()
  Make ->drop_inode() just return whether inode needs to be dropped
  fs/inode.c:clear_inode() is gone
  fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
  ...

Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-10 11:26:52 -07:00
Al Viro
b57922d97f convert remaining ->clear_inode() to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:48:37 -04:00
Christoph Hellwig
155130a4f7 get rid of block_write_begin_newtrunc
Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to block_write_begin.

While we're at it also remove several unused arguments to block_write_begin.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:33 -04:00
Christoph Hellwig
eafdc7d190 sort out blockdev_direct_IO variants
Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence.  This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway.  Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:29 -04:00
Arnd Bergmann
6e9624b8ca block: push down BKL into .open and .release
The open and release block_device_operations are currently
called with the BKL held. In order to change that, we must
first make sure that all drivers that currently rely
on this have no regressions.

This blindly pushes the BKL into all .open and .release
operations for all block drivers to prepare for the
next step. The drivers can subsequently replace the BKL
with their own locks or remove it completely when it can
be shown that it is not needed.

The functions blkdev_get and blkdev_put are the only
remaining users of the big kernel lock in the block
layer, besides a few uses in the ioctl code, none
of which need to serialize with blkdev_{get,put}.

Most of these two functions is also under the protection
of bdev->bd_mutex, including the actual calls to
->open and ->release, and the common code does not
access any global data structures that need the BKL.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:25:34 +02:00
Tejun Heo
e75aa85892 block_dev: always serialize exclusive open attempts
bd_prepare_to_claim() incorrectly allowed multiple attempts for
exclusive open to progress in parallel if the attempting holders are
identical.  This triggered BUG_ON() as reported in the following bug.

  https://bugzilla.kernel.org/show_bug.cgi?id=16393

__bd_abort_claiming() is used to finish claiming blocks and doesn't
work if multiple openers are inside a claiming block.  Allowing
multiple parallel open attempts to continue doesn't gain anything as
those are serialized down in the call chain anyway.  Fix it by always
allowing only single open attempt in a claiming block.

This problem can easily be reproduced by adding a delay after
bd_prepare_to_claim() and attempting to mount two partitions of a
disk.

stable: only applicable to v2.6.35

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-04 11:17:10 -07:00
Jens Axboe
3e6c05052c block: remove duplicate BUG_ON() in bd_finish_claiming()
We do the same BUG_ON() just a line later when calling into
__bd_abort_claiming().

Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-10 19:08:34 +02:00
Nick Piggin
b0018361c3 block: bd_start_claiming cleanup
I don't like the subtle multi-context code in bd_claim (ie.  detects where it
has been called based on bd_claiming). It seems clearer to just require a new
function to finish a 2-part claim.

Also improve commentary in bd_start_claiming as to how it should
be used.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-10 19:08:34 +02:00
Nick Piggin
cf3425707e block: bd_start_claiming fix module refcount
bd_start_claiming has an unbalanced module_put introduced in 6b4517a79.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-10 19:08:34 +02:00
Nick Piggin
3322e79a38 fs: convert simple fs to new truncate
Convert simple filesystems: ramfs, configfs, sysfs, block_dev to new truncate
sequence.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:15:47 -04:00
Christoph Hellwig
7ea8085910 drop unused dentry argument to ->fsync
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:05:02 -04:00
Linus Torvalds
e8bebe2f71 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits)
  fix handling of offsets in cris eeprom.c, get rid of fake on-stack files
  get rid of home-grown mutex in cris eeprom.c
  switch ecryptfs_write() to struct inode *, kill on-stack fake files
  switch ecryptfs_get_locked_page() to struct inode *
  simplify access to ecryptfs inodes in ->readpage() and friends
  AFS: Don't put struct file on the stack
  Ban ecryptfs over ecryptfs
  logfs: replace inode uid,gid,mode initialization with helper function
  ufs: replace inode uid,gid,mode initialization with helper function
  udf: replace inode uid,gid,mode init with helper
  ubifs: replace inode uid,gid,mode initialization with helper function
  sysv: replace inode uid,gid,mode initialization with helper function
  reiserfs: replace inode uid,gid,mode initialization with helper function
  ramfs: replace inode uid,gid,mode initialization with helper function
  omfs: replace inode uid,gid,mode initialization with helper function
  bfs: replace inode uid,gid,mode initialization with helper function
  ocfs2: replace inode uid,gid,mode initialization with helper function
  nilfs2: replace inode uid,gid,mode initialization with helper function
  minix: replace inode uid,gid,mode init with helper
  ext4: replace inode uid,gid,mode init with helper
  ...

Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)
2010-05-21 19:37:45 -07:00
Josef Bacik
18e9e5104f Introduce freeze_super and thaw_super for the fsfreeze ioctl
Currently the way we do freezing is by passing sb>s_bdev to freeze_bdev and then
letting it do all the work.  But freezing is more of an fs thing, and doesn't
really have much to do with the bdev at all, all the work gets done with the
super.  In btrfs we do not populate s_bdev, since we can have multiple bdev's
for one fs and setting s_bdev makes removing devices from a pool kind of tricky.
This means that freezing a btrfs filesystem fails, which causes us to corrupt
with things like tux-on-ice which use the fsfreeze mechanism.  So instead of
populating sb->s_bdev with a random bdev in our pool, I've broken the actual fs
freezing stuff into freeze_super and thaw_super.  These just take the
super_block that we're freezing and does the appropriate work.  It's basically
just copy and pasted from freeze_bdev.  I've then converted freeze_bdev over to
use the new super helpers.  I've tested this with ext4 and btrfs and verified
everything continues to work the same as before.

The only new gotcha is multiple calls to the fsfreeze ioctl will return EBUSY if
the fs is already frozen.  I thought this was a better solution than adding a
freeze counter to the super_block, but if everybody hates this idea I'm open to
suggestions.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:18 -04:00
Al Viro
d3f2147307 Move grabbing s_umount to callers of grab_super()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:17 -04:00
Jens Axboe
7407cf355f Merge branch 'master' into for-2.6.35
Conflicts:
	fs/block_dev.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-29 09:36:24 +02:00
Dmitry Monakhov
fbd9b09a17 blkdev: generalize flags for blkdev_issue_fn functions
The patch just convert all blkdev_issue_xxx function to common
set of flags. Wait/allocation semantics preserved.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-28 19:47:36 +02:00
Tejun Heo
6b4517a791 block: implement bd_claiming and claiming block
Currently, device claiming for exclusive open is done after low level
open - disk->fops->open() - has completed successfully.  This means
that exclusive open attempts while a device is already exclusively
open will fail only after disk->fops->open() is called.

cdrom driver issues commands during open() which means that O_EXCL
open attempt can unintentionally inject commands to in-progress
command stream for burning thus disturbing burning process.  In most
cases, this doesn't cause problems because the first command to be
issued is TUR which most devices can process in the middle of burning.
However, depending on how a device replies to TUR during burning,
cdrom driver may end up issuing further commands.

This can't be resolved trivially by moving bd_claim() before doing
actual open() because that means an open attempt which will end up
failing could interfere other legit O_EXCL open attempts.
ie. unconfirmed open attempts can fail others.

This patch resolves the problem by introducing claiming block which is
started by bd_start_claiming() and terminated either by bd_claim() or
bd_abort_claiming().  bd_claim() from inside a claiming block is
guaranteed to succeed and once a claiming block is started, other
bd_start_claiming() or bd_claim() attempts block till the current
claiming block is terminated.

bd_claim() can still be used standalone although now it always
synchronizes against claiming blocks, so the existing users will keep
working without any change.

blkdev_open() and open_bdev_exclusive() are converted to use claiming
blocks so that exclusive open attempts from these functions don't
interfere with the existing exclusive open.

This problem was discovered while investigating bko#15403.

  https://bugzilla.kernel.org/show_bug.cgi?id=15403

The burning problem itself can be resolved by updating userspace
probing tools to always open w/ O_EXCL.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Matthias-Christian Ott <ott@mirix.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-27 10:57:54 +02:00
Tejun Heo
1a3cbbc5a5 block: factor out bd_may_claim()
Factor out bd_may_claim() from bd_claim(), add comments and apply a
couple of cosmetic edits.  This is to prepare for further updates to
claim path.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-27 10:57:54 +02:00
Anton Blanchard
b8af67e268 fs/block_dev.c: fix performance regression in O_DIRECT|O_SYNC writes to block devices
We are seeing a large regression in database performance on recent
kernels.  The database opens a block device with O_DIRECT|O_SYNC and a
number of threads write to different regions of the file at the same time.

A simple test case is below.  I haven't defined DEVICE since getting it
wrong will destroy your data :) On an 3 disk LVM with a 64k chunk size we
see about 17MB/sec and only a few threads in IO wait:

procs  -----io---- -system-- -----cpu------
 r  b     bi    bo   in   cs us sy id wa st
 0  3      0 16170  656 2259  0  0 86 14  0
 0  2      0 16704  695 2408  0  0 92  8  0
 0  2      0 17308  744 2653  0  0 86 14  0
 0  2      0 17933  759 2777  0  0 89 10  0

Most threads are blocking in vfs_fsync_range, which has:

        mutex_lock(&mapping->host->i_mutex);
        err = fop->fsync(file, dentry, datasync);
        if (!ret)
                ret = err;
        mutex_unlock(&mapping->host->i_mutex);

commit 148f948ba8 (vfs: Introduce new
helpers for syncing after writing to O_SYNC file or IS_SYNC inode) offers
some explanation of what is going on:

    Use these new helpers for syncing from generic VFS functions. This makes
    O_SYNC writes to block devices acquire i_mutex for syncing. If we really
    care about this, we can make block_fsync() drop the i_mutex and reacquire
    it before it returns.

Thanks Jan for such a good commit message!  As well as dropping i_mutex,
Christoph suggests we should remove the call to sync_blockdev():

> sync_blockdev is an overcomplicated alias for filemap_write_and_wait on
> the block device inode, which is exactly what we did just before calling
> into ->fsync

The patch below incorporates both suggestions. With it the testcase improves
from 17MB/s to 68M/sec:

procs  -----io---- -system-- -----cpu------
 r  b     bi    bo   in   cs us sy id wa st
 0  7      0 65536 1000 3878  0  0 70 30  0
 0 34      0 69632 1016 3921  0  1 46 53  0
 0 57      0 69632 1000 3921  0  0 55 45  0
 0 53      0 69640  754 4111  0  0 81 19  0

Testcase:

#define _GNU_SOURCE
#include <stdio.h>
#include <pthread.h>
#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>

#define NR_THREADS 64
#define BUFSIZE (64 * 1024)

#define DEVICE "/dev/mapper/XXXXXX"

#define ALIGN(VAL, SIZE) (((VAL)+(SIZE)-1) & ~((SIZE)-1))

static int fd;

static void *doit(void *arg)
{
	unsigned long offset = (long)arg;
	char *b, *buf;

	b = malloc(BUFSIZE + 1024);
	buf = (char *)ALIGN((unsigned long)b, 1024);
	memset(buf, 0, BUFSIZE);

	while (1)
		pwrite(fd, buf, BUFSIZE, offset);
}

int main(int argc, char *argv[])
{
	int flags = O_RDWR|O_DIRECT;
	int i;
	unsigned long offset = 0;

	if (argc > 1 && !strcmp(argv[1], "O_SYNC"))
		flags |= O_SYNC;

	fd = open(DEVICE, flags);
	if (fd == -1) {
		perror("open");
		exit(1);
	}

	for (i = 0; i < NR_THREADS-1; i++) {
		pthread_t tid;
		pthread_create(&tid, NULL, doit, (void *)offset);
		offset += BUFSIZE;
	}
	doit((void *)offset);

	return 0;
}

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24 11:31:26 -07:00
Andrew Morton
b1dd3b2843 vfs: rename block_fsync() to blkdev_fsync()
Requested by hch, for consistency now it is exported.

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Anton Blanchard <anton@samba.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:04 -07:00
Anton Blanchard
55ab3a1ff8 raw: fsync method is now required
Commit 148f948ba8 (vfs: Introduce new
helpers for syncing after writing to O_SYNC file or IS_SYNC inode) broke
the raw driver.

We now call through generic_file_aio_write -> generic_write_sync ->
vfs_fsync_range.  vfs_fsync_range has:

        if (!fop || !fop->fsync) {
                ret = -EINVAL;
                goto out;
        }

But drivers/char/raw.c doesn't set an fsync method.

We have two options: fix it or remove the raw driver completely.  I'm
happy to do either, the fact this has been broken for so long suggests it
is rarely used.

The patch below adds an fsync method to the raw driver.  My knowledge of
the block layer is pretty sketchy so this could do with a once over.

If we instead decide to remove the raw driver, this patch might still be
useful as a backport to 2.6.33 and 2.6.32.

Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:04 -07:00
Jun'ichi Nomura
4b06e5b9ad freeze_bdev: don't deactivate successfully frozen MS_RDONLY sb
Thanks Thomas and Christoph for testing and review.
I removed 'smp_wmb()' before up_write from the previous patch,
since up_write() should have necessary ordering constraints.
(I.e. the change of s_frozen is visible to others after up_write)
I'm quite sure the change is harmless but if you are uncomfortable
with Tested-by/Reviewed-by on the modified patch, please remove them.

If MS_RDONLY, freeze_bdev should just up_write(s_umount) instead of
deactivate_locked_super().
Also, keep sb->s_frozen consistent so that remount can check the frozen state.

Otherwise a crash reported here can happen:
http://lkml.org/lkml/2010/1/16/37
http://lkml.org/lkml/2010/1/28/53

This patch should be applied for 2.6.32 stable series, too.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Thomas Backlund <tmb@mandriva.org>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-02-07 03:06:21 -05:00
Jens Axboe
2058297d2d Merge branch 'for-linus' into for-2.6.33
Conflicts:
	block/cfq-iosched.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 21:14:39 +01:00
Christoph Hellwig
ab0a9735e0 blkdev: flush disk cache on ->fsync
Currently there is no barrier support in the block device code.  That
means we cannot guarantee any sort of data integerity when using the
block device node with dis kwrite caches enabled.  Using the raw block
device node is a typical use case for virtualization (and I assume
databases, too).  This patch changes block_fsync to issue a cache flush
and thus make fsync on block device nodes actually useful.

Note that in mainline we would also need to add such code to the
->aio_write method for O_SYNC handling, but assuming that Jan's patch
series for the O_SYNC rewrite goes in it will also call into ->fsync
for 2.6.32.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-29 14:14:04 +01:00
Neil Brown
960cc0f4fe block: use after free bug in __blkdev_get
commit 0762b8bde9
(from 14 months ago) introduced a use-after-free bug which has just
recently started manifesting in my md testing.
I tried git bisect to find out what caused the bug to start
manifesting, and it could have been the recent change to
blk_unregister_queue (48c0d4d4c0) but the results were inconclusive.

This patch certainly fixes my symptoms and looks correct as the two
calls are now in the same order as elsewhere in that function.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-26 15:27:11 +01:00
Christoph Hellwig
4504230a71 freeze_bdev: grab active reference to frozen superblocks
Currently we held s_umount while a filesystem is frozen, despite that we
might return to userspace and unlock it from a different process.  Instead
grab an active reference to keep the file system busy and add an explicit
check for frozen filesystems in remount and reject the remount instead
of blocking on s_umount.

Add a new get_active_super helper to super.c for use by freeze_bdev that
grabs an active reference to a superblock from a given block device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-09-24 07:47:41 -04:00
Christoph Hellwig
4fadd7bb20 freeze_bdev: kill bd_mount_sem
Now that we have the freeze count there is not much reason for bd_mount_sem
anymore.  The actual freeze/thaw operations are serialized using the
bd_fsfreeze_mutex, and the only other place we take bd_mount_sem is
get_sb_bdev which tries to prevent mounting a filesystem while the block
device is frozen.  Instead of add a check for bd_fsfreeze_count and
return -EBUSY if a filesystem is frozen.  While that is a change in user
visible behaviour a failing mount is much better for this case rather
than having the mount process stuck uninterruptible for a long time.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-09-24 07:47:39 -04:00
Alexey Dobriyan
83d5cde47d const: make block_device_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:25 -07:00
Jens Axboe
2c96ce9f20 fs: remove bdev->bd_inode_backing_dev_info
It has been unused since it was introduced in:

commit 520808bf20e90fdbdb320264ba7dd5cf9d47dcac
Author: Andrew Morton <akpm@osdl.org>
Date:   Fri May 21 00:46:17 2004 -0700

    [PATCH] block device layer: separate backing_dev_info infrastructure

So lets just kill it.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16 15:16:18 +02:00
Christoph Hellwig
eef9938067 vfs: Rename generic_file_aio_write_nolock
generic_file_aio_write_nolock() is now used only by block devices and raw
character device. Filesystems should use __generic_file_aio_write() in case
generic_file_aio_write() doesn't suit them. So rename the function to
blkdev_aio_write() and move it to fs/blockdev.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-14 17:08:15 +02:00
Alan Jenkins
dddac6a7b4 PM / Hibernate: Replace bdget call with simple atomic_inc of i_count
Create bdgrab().  This function copies an existing reference to a
block_device.  It is safe to call from any context.

Hibernation code wishes to copy a reference to the active swap device.
Right now it calls bdget() under a spinlock, but this is wrong because
bdget() can sleep.  It doesn't need a full bdget() because we already
hold a reference to active swap devices (and the spinlock protects
against swapoff).

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13827

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-07-29 21:07:55 +02:00
Jan Kara
60b0680fa2 vfs: Rename fsync_super() to sync_filesystem() (version 4)
Rename the function so that it better describe what it really does. Also
remove the unnecessary include of buffer_head.h.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:04 -04:00
Jan Kara
5cee5815d1 vfs: Make sys_sync() use fsync_super() (version 4)
It is unnecessarily fragile to have two places (fsync_super() and do_sync())
doing data integrity sync of the filesystem. Alter __fsync_super() to
accommodate needs of both callers and use it. So after this patch
__fsync_super() is the only place where we gather all the calls needed to
properly send all data on a filesystem to disk.

Nice bonus is that we get a complete livelock avoidance and write_supers()
is now only used for periodic writeback of superblocks.

sync_blockdevs() introduced a couple of patches ago is gone now.

[build fixes folded]

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:03 -04:00
Jan Kara
429479f031 vfs: Make __fsync_super() a static function (version 4)
__fsync_super() does the same thing as fsync_super(). So change the only
caller to use fsync_super() and make __fsync_super() static. This removes
unnecessarily duplicated call to sync_blockdev() and prepares ground
for the changes to __fsync_super() in the following patches.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:03 -04:00
Linus Torvalds
512626a04e Merge branch 'for-linus' of git://linux-arm.org/linux-2.6
* 'for-linus' of git://linux-arm.org/linux-2.6:
  kmemleak: Add the corresponding MAINTAINERS entry
  kmemleak: Simple testing module for kmemleak
  kmemleak: Enable the building of the memory leak detector
  kmemleak: Remove some of the kmemleak false positives
  kmemleak: Add modules support
  kmemleak: Add kmemleak_alloc callback from alloc_large_system_hash
  kmemleak: Add the vmalloc memory allocation/freeing hooks
  kmemleak: Add the slub memory allocation/freeing hooks
  kmemleak: Add the slob memory allocation/freeing hooks
  kmemleak: Add the slab memory allocation/freeing hooks
  kmemleak: Add documentation on the memory leak detector
  kmemleak: Add the base support

Manual conflict resolution (with the slab/earlyboot changes) in:
	drivers/char/vt.c
	init/main.c
	mm/slab.c
2009-06-11 14:15:57 -07:00
Catalin Marinas
2e1483c995 kmemleak: Remove some of the kmemleak false positives
There are allocations for which the main pointer cannot be found but
they are not memory leaks. This patch fixes some of them. For more
information on false positives, see Documentation/kmemleak.txt.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-11 17:04:18 +01:00
Jens Axboe
172124e220 Revert "block: implement blkdev_readpages"
This reverts commit db2dbb12dc.

It apparently causes problems with partition table read-ahead
on archs with large page sizes. Until that problem is diagnosed
further, just drop the readpages support on block devices.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-04 22:34:44 +02:00
Martin K. Petersen
e1defc4ff0 block: Do away with the notion of hardsect_size
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case.  The
sector size will be 4KB but the logical block size will remain
512-bytes.  Hence we need to distinguish between the physical block size
and the logical ditto.

This patch renames hardsect_size to logical_block_size.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Jeff Moyer
db2dbb12dc block: implement blkdev_readpages
Doing a proper block dev ->readpages() speeds up the crazy dump(8)
approach of using interleaved process IO.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28 07:37:33 +02:00
Al Viro
47e4491b40 Cleanup after commit 585d3bc06f
fsync_bdev() export and a bunch of stubs for !CONFIG_BLOCK case had
been left behind

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-01 07:07:16 -04:00
Nick Piggin
585d3bc06f fs: move bdev code out of buffer.c
Move some block device related code out from buffer.c and put it in
block_dev.c. I'm trying to move non-buffer_head code out of buffer.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-27 14:44:03 -04:00