Here iterate_all_kinds() is used just to find the first (non-empty, in
case of iovec) segment. Which can be easily done explicitly.
Note that in bvec case we now can get more than PAGE_SIZE worth of them,
in case when we have a compound page in bvec and a range that crosses
a subpage boundary. Older behaviour had been to stop on that boundary;
we used to get the right first page (for_each_bvec() took care of that),
but that was all we'd got.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For one thing, it's only used for iovec (and makes sense only for those).
For another, here we don't care about iov_offset, since the beginning of
the first segment and the end of the last one are ignored. So it makes
a lot more sense to just walk through the iovec array...
We need to deal with the case of truncated iov_iter, but unlike the
situation with iov_iter_alignment() we don't care where the last
segment ends - just which segment is the last one.
[fixed a braino spotted by Qian Cai <quic_qiancai@quicinc.com>]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's easier to go over the array manually. We need to watch out
for truncated iov_iter, though - iovec array might cover more
than i->count.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1) constify iov_iter argument; we are not advancing it in this primitive.
2) cap the amount requested by the amount of data in iov_iter. All
existing callers should've been safe, but the check is really cheap and
doing it here makes for easier analysis, as well as more consistent
semantics among the primitives.
3) don't bother with iterate_iovec(). Explicit loop is not any harder
to follow, and we get rid of standalone iterate_iovec() users - it's
only used by iterate_and_advance() and (soon to be gone) iterate_all_kinds().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We can do better than generic iterate_and_advance() for this one;
inspired by bvec_iter_advance() (and massaged into that form by
equivalent transformations).
[fixed a braino caught by kernel test robot <oliver.sang@intel.com>]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of having them mixed in iter->type, use separate ->iter_type
and ->data_source (u8 and bool resp.) And don't bother with (pseudo-)
bitmap for the former - microoptimizations from being able to check
if the flavour is one of two values are not worth the confusion for
optimizer. It can't prove that we never get e.g. ITER_IOVEC | ITER_PIPE,
so we end up with extra headache.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
iovec is the most common one; test it first and test explicitly,
rather than "not anything else". Replace all flavour checks with
use of iov_iter_is_...() helpers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use corresponding plain variants, revert on short copy. That's the way it
should've been done from the very beginning, except that we didn't have
iov_iter_revert() back then...
[fixed another braino caught by Qian Cai <quic_qiancai@quicinc.com>]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
asking to advance by more than we have left in the iov_iter should
move to the very end; it should *not* leave negative i->count and
it should not spew into syslog, etc. - it's a legitimate operation.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In situation when copy_page_to_iter() got a compound page the current
code would only work on systems with no CONFIG_HIGHMEM. It *is* the majority
of real-world setups, or we would've drown in bug reports by now. Still needs
fixing.
Current variant works for solitary page; rename that to
__copy_page_to_iter() and turn the handling of compound pages into a loop over
subpages.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove iov_iter_for_each_range() as it's no longer used with the removal of
lustre.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Some arches (um, sparc64, riscv, xtensa) cause a Kconfig warning for
LOCKDEP.
These arch-es select LOCKDEP_SUPPORT but they are not listed as one
of the arch-es that LOCKDEP depends on.
Since (16) arch-es define the Kconfig symbol LOCKDEP_SUPPORT if they
intend to have LOCKDEP support, replace the awkward list of
arch-es that LOCKDEP depends on with the LOCKDEP_SUPPORT symbol.
But wait. LOCKDEP_SUPPORT is included in LOCK_DEBUGGING_SUPPORT,
which is already a dependency here, so LOCKDEP_SUPPORT is redundant
and not needed.
That leaves the FRAME_POINTER dependency, but it is part of an
expression like this:
depends on (A && B) && (FRAME_POINTER || B')
where B' is a dependency of B so if B is true then B' is true
and the value of FRAME_POINTER does not matter.
Thus we can also delete the FRAME_POINTER dependency.
Fixes this kconfig warning: (for um, sparc64, riscv, xtensa)
WARNING: unmet direct dependencies detected for LOCKDEP
Depends on [n]: DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y] && (FRAME_POINTER [=n] || MIPS || PPC || S390 || MICROBLAZE || ARM || ARC || X86)
Selected by [y]:
- PROVE_LOCKING [=y] && DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y]
- LOCK_STAT [=y] && DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y]
- DEBUG_LOCK_ALLOC [=y] && DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y]
Fixes: 7d37cb2c91 ("lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20210524224150.8009-1-rdunlap@infradead.org
Pull percpu fixes from Dennis Zhou:
"This contains a cleanup to lib/percpu-refcount.c and an update to the
MAINTAINERS file to more formally take over support for lib/percpu*"
* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
MAINTAINERS: Add lib/percpu* as part of percpu entry
percpu_ref: Don't opencode percpu_ref_is_dying
sparse was producing warnings of the form:
sparse: cast truncates bits from constant value (ffff0001 becomes 1)
There is no actual problem here. Using type_min() on an unsigned type
results in an (expected) truncation.
However, there is no need to test an unsigned value against type_min().
The minimum value of an unsigned is obviously 0, and any value cast to
an unsigned type is >= 0, so for unsigneds only type_max() need be tested.
This patch also takes the opportunity to clean up the implementation of
simple_numbers_loop() to use a common pattern for the positive and
negative test.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210525122012.6336-2-rf@opensource.cirrus.com
We'd like all architectures to convert to ARCH_ATOMIC, as this will
enable functionality, and once all architectures are converted it will
be possible to make significant cleanups to the atomic headers.
A number of architectures use asm-generic/atomic64.h, and it's
impractical to convert the header and all these architectures in one go.
To make it possible to convert them one-by-one, let's make the
asm-generic implementation function as either atomic64_*() or
arch_atomic64_*() depending on whether ARCH_ATOMIC is selected. To do
this, the generic implementations are prefixed as generic_atomic64_*(),
and preprocessor definitions map atomic64_*()/arch_atomic64_*() onto
these as appropriate.
Once all users are moved over to ARCH_ATOMIC the ifdeffery in the header
can be simplified and/or removed entirely.
For existing users (none of which select ARCH_ATOMIC), there should be
no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210525140232.53872-11-mark.rutland@arm.com
Commit 09c60546f0 ("./Makefile: add debug option to enable
function aligned on 32 bytes") was introduced to help debugging
strange kernel performance changes caused by code alignment
change.
Recently we found 2 similar cases [1][2] caused by code-alignment
changes, which can only be identified by forcing 64 bytes aligned
for all functions.
Originally, 32 bytes was used mainly for not wasting too much
text space, but this option is only for debug anyway where text
space is not a big concern. So extend the alignment to 64 bytes
to cover more similar cases.
[1].https://lore.kernel.org/lkml/20210427090013.GG32408@xsang-OptiPlex-9020/
[2].https://lore.kernel.org/lkml/20210420030837.GB31773@xsang-OptiPlex-9020/
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
lib/bitfield_kunit.c: In function `test_bitfields_constants':
lib/bitfield_kunit.c:93:1: warning: the frame size of 7456 bytes is larger than 2048 bytes [-Wframe-larger-than=]
}
^
As the description of BITFIELD_KUNIT in lib/Kconfig.debug, it "Only useful
for kernel devs running the KUnit test harness, and not intended for
inclusion into a production build". Therefore, it is not worth modifying
variable 'test_bitfields_constants' to clear this warning. Just suppress
it.
Link: https://lkml.kernel.org/r/20210518094533.7652-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull char/misc driver fixes from Greg KH:
"Here is a big set of char/misc/other driver fixes for 5.13-rc3.
The majority here is the fallout of the umn.edu re-review of all prior
submissions. That resulted in a bunch of reverts along with the
"correct" changes made, such that there is no regression of any of the
potential fixes that were made by those individuals. I would like to
thank the over 80 different developers who helped with the review and
fixes for this mess.
Other than that, there's a few habanna driver fixes for reported
issues, and some dyndbg fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (82 commits)
misc: eeprom: at24: check suspend status before disable regulator
uio_hv_generic: Fix another memory leak in error handling paths
uio_hv_generic: Fix a memory leak in error handling paths
uio/uio_pci_generic: fix return value changed in refactoring
Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""
dyndbg: drop uninformative vpr_info
dyndbg: avoid calling dyndbg_emit_prefix when it has no work
binder: Return EFAULT if we fail BINDER_ENABLE_ONEWAY_SPAM_DETECTION
cdrom: gdrom: initialize global variable at init time
brcmfmac: properly check for bus register errors
Revert "brcmfmac: add a check for the status of usb_register"
video: imsttfb: check for ioremap() failures
Revert "video: imsttfb: fix potential NULL pointer dereferences"
net: liquidio: Add missing null pointer checks
Revert "net: liquidio: fix a NULL pointer dereference"
media: gspca: properly check for errors in po1030_probe()
Revert "media: gspca: Check the return value of write_bridge for timeout"
media: gspca: mt9m111: Check write_bridge for timeout
Revert "media: gspca: mt9m111: Check write_bridge for timeout"
media: dvb: Add check on sp8870_readreg return
...
The existing code attempted to handle numbers by doing a strto[u]l(),
ignoring the field width, and then repeatedly dividing to extract the
field out of the full converted value. If the string contains a run of
valid digits longer than will fit in a long or long long, this would
overflow and no amount of dividing can recover the correct value.
This patch fixes vsscanf() to obey number field widths when parsing
the number.
A new _parse_integer_limit() is added that takes a limit for the number
of characters to parse. The number field conversion in vsscanf is changed
to use this new function.
If a number starts with a radix prefix, the field width must be long
enough for at last one digit after the prefix. If not, it will be handled
like this:
sscanf("0x4", "%1i", &i): i=0, scanning continues with the 'x'
sscanf("0x4", "%2i", &i): i=0, scanning continues with the '4'
This is consistent with the observed behaviour of userland sscanf.
Note that this patch does NOT fix the problem of a single field value
overflowing the target type. So for example:
sscanf("123456789abcdef", "%x", &i);
Will not produce the correct result because the value obviously overflows
INT_MAX. But sscanf will report a successful conversion.
Note that where a very large number is used to mean "unlimited", the value
INT_MAX is used for consistency with the behaviour of vsnprintf().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210514161206.30821-2-rf@opensource.cirrus.com
If a signed number field starts with a '-' the field width must be > 1,
or unlimited, to allow at least one digit after the '-'.
This patch adds a check for this. If a signed field starts with '-'
and field_width == 1 the scanf will quit.
It is ok for a signed number field to have a field width of 1 if it
starts with a digit. In that case the single digit can be converted.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210514161206.30821-1-rf@opensource.cirrus.com
Currently the bitmap_remap() and bitmap_bitremap() are available
only for CONFIG_NUMA=y case, while some users may benefit out of it
and being independent to NUMA code. Make them available to users
by moving out of ifdeffery and exporting for modules.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neeli Srinivas <sneeli@xilinx.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
RCU code supports an 'all' group as a special case when parsing rcu_nocbs
parameter. This patch moves the 'all' support to the core bitmap_parse
code, so that all bitmap users can enjoy this extension.
Moving 'all' parsing to a bitmap_parse level also allows users to pass
patterns together with 'all' in regular group:pattern format, for example,
"rcu_nocbs=all:1/2" would offload all the even-numbered CPUs regardless
of the number of CPUs on the system.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
Commit 52fbf1134d ("lib/genalloc.c: fix allocation of aligned buffer
from non-aligned chunk") added a new parameter 'start_addr' w/o
description for it. That causes some doc compile warning:
lib/genalloc.c:649: warning: Function parameter or member 'start_addr' not described in 'gen_pool_first_fit'
lib/genalloc.c:667: warning: Function parameter or member 'start_addr' not described in 'gen_pool_first_fit_align'
lib/genalloc.c:694: warning: Function parameter or member 'start_addr' not described in 'gen_pool_fixed_alloc'
lib/genalloc.c:729: warning: Function parameter or member 'start_addr' not described in 'gen_pool_first_fit_order_align'
lib/genalloc.c:752: warning: Function parameter or member 'start_addr' not described in 'gen_pool_best_fit'
This fixes it by adding a parameter descriptions.
Link: https://lkml.kernel.org/r/20210405132021.131231-1-alexs@kernel.org
Signed-off-by: Alex Shi <alexs@kernel.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Cc: Huang Shijie <sjhuang@iluvatar.ai>
Cc: Alex Shi <alexs@kernel.org>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit 3e8f399da4 ("writeback: rework wb_[dec|inc]_stat family of
functions") add some function description of percpu_counter_add_batch.
but the double '*' in comments means a kernel-doc format comment which
isn't right.
Since the whole file of lib/percpu_counter.c has no any other kernel-doc
format comments, we'd better to remove this incomplete one to tame the
kernel-doc warning:
lib/percpu_counter.c:83: warning: Function parameter or member 'fbc' not described in 'percpu_counter_add_batch'
lib/percpu_counter.c:83: warning: Function parameter or member 'amount' not described in 'percpu_counter_add_batch'
lib/percpu_counter.c:83: warning: Function parameter or member 'batch' not described in 'percpu_counter_add_batch'
Link: https://lkml.kernel.org/r/20210405135505.132446-1-alexs@kernel.org
Signed-off-by: Alex Shi <alexs@kernel.org>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
