If we have doubly sized SQEs, then we need to shift the sq index by 1
to account for using two entries for a single request. The CQE dumping
gets this right, but the SQE one does not.
Improve the SQE dumping in general, the information dumped is pretty
sparse and doesn't even cover the whole basic part of the SQE. Include
information on the extended part of the SQE, if doubly sized SQEs are
in use. A typical dump now looks like the following:
[...]
SQEs: 32
32: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2721, e0:0x0, e1:0xffffb8041000, e2:0x100000000000, e3:0x5500, e4:0x7, e5:0x0, e6:0x0, e7:0x0
33: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2722, e0:0x0, e1:0xffffb8043000, e2:0x100000000000, e3:0x5508, e4:0x7, e5:0x0, e6:0x0, e7:0x0
34: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2723, e0:0x0, e1:0xffffb8045000, e2:0x100000000000, e3:0x5510, e4:0x7, e5:0x0, e6:0x0, e7:0x0
[...]
Fixes: ebdeb7c01d ("io_uring: add support for 128-byte SQEs")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already have the cq_shift, just use that to tell if we have doubly
sized CQEs or not.
While in there, cleanup the CQE32 vs normal CQE size printing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit 934447a603 ("io_uring: do not recycle buffer in READV") a
temporary fix was put in io_kbuf_recycle to simply never recycle READV
buffers.
Instead of that, rather treat READV with REQ_F_BUFFER_SELECTED the same as
a READ with REQ_F_BUFFER_SELECTED. Since READV requires iov_len of 1 they
are essentially the same.
In order to do this inside io_prep_rw() add some validation to check that
it is in fact only length 1, and also extract the length of the buffer at
prep time.
This allows removal of the io_iov_buffer_select codepaths as they are only
used from the READV op.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220907165152.994979-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need the poll_flags to know how to poll for the IO, and we should
have the batch structure in preparation for supporting batched
completions with iopoll.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Combine the two checks we have for task_work running and whether or not
we need to shuffle the mutex into one, so we unify how task_work is run
in the iopoll loop. This helps ensure that local task_work is run when
needed, and also optimizes that path to avoid a mutex shuffle if it's
not needed.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have a few spots that drop the mutex just to run local task_work,
which immediately tries to grab it again. Add a helper that just passes
in whether we're locked already.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After the addition of iopoll support for passthrough, there's a bit of
a mixup here. Clean it up and get rid of the casting for the passthrough
command type.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some workloads rely on a registered eventfd (via
io_uring_register_eventfd(3)) in order to wake up and process the
io_uring.
In the case of a ring setup with IORING_SETUP_DEFER_TASKRUN, that eventfd
also needs to be signalled when there are tasks to run.
This changes an old behaviour which assumed 1 eventfd signal implied at
least 1 CQE, however only when this new flag is set (and so old users will
not notice). This should be expected with the IORING_SETUP_DEFER_TASKRUN
flag as it is not guaranteed that every task will result in a CQE.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220830125013.570060-7-dylany@fb.com
[axboe: fold in call_rcu() serialization fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow deferring async tasks until the user calls io_uring_enter(2) with
the IORING_ENTER_GETEVENTS flag. Enable this mode with a flag at
io_uring_setup time. This functionality requires that the later
io_uring_enter will be called from the same submission task, and therefore
restrict this flag to work only when IORING_SETUP_SINGLE_ISSUER is also
set.
Being able to hand pick when tasks are run prevents the problem where
there is current work to be done, however task work runs anyway.
For example, a common workload would obtain a batch of CQEs, and process
each one. Interrupting this to additional taskwork would add latency but
not gain anything. If instead task work is deferred to just before more
CQEs are obtained then no additional latency is added.
The way this is implemented is by trying to keep task work local to a
io_ring_ctx, rather than to the submission task. This is required, as the
application will want to wake up only a single io_ring_ctx at a time to
process work, and so the lists of work have to be kept separate.
This has some other benefits like not having to check the task continually
in handle_tw_list (and potentially unlocking/locking those), and reducing
locks in the submit & process completions path.
There are networking cases where using this option can reduce request
latency by 50%. For example a contrived example using [1] where the client
sends 2k data and receives the same data back while doing some system
calls (to trigger task work) shows this reduction. The reason ends up
being that if sending responses is delayed by processing task work, then
the client side sits idle. Whereas reordering the sends first means that
the client runs it's workload in parallel with the local task work.
[1]:
Using https://github.com/DylanZA/netbench/tree/defer_run
Client:
./netbench --client_only 1 --control_port 10000 --host <host> --tx "epoll --threads 16 --per_thread 1 --size 2048 --resp 2048 --workload 1000"
Server:
./netbench --server_only 1 --control_port 10000 --rx "io_uring --defer_taskrun 0 --workload 100" --rx "io_uring --defer_taskrun 1 --workload 100"
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220830125013.570060-5-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is not needed, and it is normally better to wait for task work until
after submissions. This will allow greater batching if either work arrives
in the meanwhile, or if the submissions cause task work to be queued up.
For SQPOLL this also no longer runs task work, but this is handled inside
the SQPOLL loop anyway.
For IOPOLL io_iopoll_check will run task work anyway
And otherwise io_cqring_wait will run task work
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220830125013.570060-4-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull io_uring fixes from Jens Axboe:
"Nothing really major here, but figured it'd be nicer to just get these
flushed out for -rc6 so that the 6.1 branch will have them as well.
That'll make our lives easier going forward in terms of development,
and avoid trivial conflicts in this area.
- Simple trace rename so that the returned opcode name is consistent
with the enum definition (Stefan)
- Send zc rsrc request vs notification lifetime fix (Pavel)"
* tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linux:
io_uring/opdef: rename SENDZC_NOTIF to SEND_ZC
io_uring/net: fix zc fixed buf lifetime
Pull io_uring fixes from Jens Axboe:
"Two small patches:
- Fix using an unsigned type for the return value, introduced in this
release (Pavel)
- Stable fix for a missing check for a fixed file on put (me)"
* tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
io_uring/msg_ring: check file type before putting
io_uring/rw: fix error'ed retry return values
If we're invoked with a fixed file, follow the normal rules of not
calling io_fput_file(). Fixed files are permanently registered to the
ring, and do not need putting separately.
Cc: stable@vger.kernel.org
Fixes: aa184e8671 ("io_uring: don't attempt to IOPOLL for MSG_RING requests")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull io_uring fixes from Jens Axboe:
- Removed function that became unused after last week's merge (Jiapeng)
- Two small fixes for kbuf recycling (Pavel)
- Include address copy for zc send for POLLFIRST (Pavel)
- Fix for short IO handling in the normal read/write path (Pavel)
* tag 'io_uring-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
io_uring/rw: fix short rw error handling
io_uring/net: copy addr for zc on POLL_FIRST
io_uring: recycle kbuf recycle on tw requeue
io_uring/kbuf: fix not advancing READV kbuf ring
io_uring/notif: Remove the unused function io_notif_complete()
We have a couple of problems, first reports of unexpected link breakage
for reads when cqe->res indicates that the IO was done in full. The
reason here is partial IO with retries.
TL;DR; we compare the result in __io_complete_rw_common() against
req->cqe.res, but req->cqe.res doesn't store the full length but rather
the length left to be done. So, when we pass the full corrected result
via kiocb_done() -> __io_complete_rw_common(), it fails.
The second problem is that we don't try to correct res in
io_complete_rw(), which, for instance, might be a problem for O_DIRECT
but when a prefix of data was cached in the page cache. We also
definitely don't want to pass a corrected result into io_rw_done().
The fix here is to leave __io_complete_rw_common() alone, always pass
not corrected result into it and fix it up as the last step just before
actually finishing the I/O.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://github.com/axboe/liburing/issues/643
Reported-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull io_uring fixes from Jens Axboe:
- A single fix for over-eager retries for networking (Pavel)
- Revert the notification slot support for zerocopy sends.
It turns out that even after more than a year or development and
testing, there's not full agreement on whether just using plain
ordered notifications is Good Enough to avoid the complexity of using
the notifications slots. Because of that, we decided that it's best
left to a future final decision.
We can always bring back this feature, but we can't really change it
or remove it once we've released 6.0 with it enabled. The reverts
leave the usual CQE notifications as the primary interface for
knowing when data was sent, and when it was acked. (Pavel)
* tag 'io_uring-6.0-2022-09-02' of git://git.kernel.dk/linux-block:
selftests/net: return back io_uring zc send tests
io_uring/net: simplify zerocopy send user API
io_uring/notif: remove notif registration
Revert "io_uring: rename IORING_OP_FILES_UPDATE"
Revert "io_uring: add zc notification flush requests"
selftests/net: temporarily disable io_uring zc test
io_uring/net: fix overexcessive retries
