In case of PCIe interoperability problem shows up, the firmware
payload may be corrupted in download stage. Turn off L0s to keep
fw download process accurately.
[ 1093.528363] mt7921e 0000:3b:00.0: Message 00000007 (seq 7) timeout
[ 1093.528414] mt7921e 0000:3b:00.0: Failed to start patch
[ 1096.600156] mt7921e 0000:3b:00.0: Message 00000010 (seq 8) timeout
[ 1096.600207] mt7921e 0000:3b:00.0: Failed to release patch semaphore
[ 1097.699031] mt7921e 0000:3b:00.0: Timeout for driver own
[ 1098.758427] mt7921e 0000:3b:00.0: Timeout for driver own
[ 1099.834408] mt7921e 0000:3b:00.0: Timeout for driver own
[ 1100.915264] mt7921e 0000:3b:00.0: Timeout for driver own
[ 1101.990625] mt7921e 0000:3b:00.0: Timeout for driver own
[ 1103.077587] mt7921e 0000:3b:00.0: Timeout for driver own
[ 1104.173258] mt7921e 0000:3b:00.0: Timeout for driver own
[ 1105.248466] mt7921e 0000:3b:00.0: Timeout for driver own
[ 1106.336969] mt7921e 0000:3b:00.0: Timeout for driver own
[ 1106.397542] mt7921e 0000:3b:00.0: hardware init failed
Cc: stable@vger.kernel.org
Fixes: bf3747ae2e ("mt76: mt7921: enable aspm by default")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Country Location Control (CLC) is an additional control for country rules
in firmware. We introduce this new feature to make sure mt7921 series
working properly in all region.
The addtional policies would be put into firmware based on differnt
regions. mt76 driver should be in charge of submitting per region policy.
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: YN Chen <YN.Chen@mediatek.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
We should reset mstat->airtime_ac along with clear up the entries in the
hardware WLAN table for the Rx and Rx accumulative airtime. Otherwsie, the
value msta->airtime_ac - [tx, rx]_last may be a negative and that is not
the actual airtime the device took in the last run.
Reported-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not need to check running state before configuring implicit Tx
beamform. It is okay to configure implicit Tx beamform in run time.
Noted that the existing connected stations will be applied for new
configuration only if they reconnected to the interface.
Fixes: 6d6dc980e0 ("mt76: mt7915: add implicit Tx beamforming support")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Initialize msta pointer to NULL in mt7921_mac_fill_rx() in order to not
dereference a uninitialized pointer.
Fixes: 0880d40871 ("mt76: connac: move mt76_connac2_reverse_frag0_hdr_trans in mt76-connac module")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix the error that mcs will be reduced to a range of 0 to 7 in ht mode.
Fixes: 70fd1333cd ("mt76: mt7915: rework .set_bitrate_mask() to support more options")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
False positive reset would be possibly triggered by those commands we
applied in suspend with HZ MCU timeout, especially it happened when we
enabled kernel log in pm core to diagnose how much time we spend in each
driver during suspend procedure. So we enlarge the value and align the MCU
timeout as other commands we did to reduce the false positive reset.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Given that there's no data coming from network stack for binding flows,
hence driver counts and reports station's statistics directly through
NL80211_STA_INFO_* based on active PPDU based TxS for offloading data.
Apart from that, WA firmware and its offloading engine (SDO) have hardcoded
"2" as PID, so we introduce MT_PACKET_ID_WED to differentiate WED reporting.
Note that PPDU format TxS is mutually exclusive with MT_TXD5_TX_STATUS_HOST.
Co-developed-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com>
Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix the regression of the firmware version report since
'b9ec27102ac0 ('mt76: connac: move mt76_connac2_load_ram in connac
module')'.
Fixes: b9ec27102a ("mt76: connac: move mt76_connac2_load_ram in connac module")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add mt7921_mutex_acquire at mt7921_[start, stop]_ap to fix the race
with the context holding dev->muxtex and the driver might access the
device in low power state.
Fixes: 24299fc869 ("mt76: mt7921: enable rx header traslation offload")
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add mt7921_mutex_acquire at mt7921_[start, stop]_ap to fix the race
with the context holding dev->muxtex and the driver might access the
device in low power state.
Fixes: 9d958b60eb ("mt76: mt7921: fix command timeout in AP stop period")
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Simplify mt76x02u_multiple_mcu_reads routine since burst is always
false.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce rx_check callback support for mt7663s driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix possible unaligned pointer in mt76_connac_mcu_add_nested_tlv
routine.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 25702d9c55 ("mt76: connac: rely on le16_add_cpu in mt76_connac_mcu_add_nested_tlv")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Similar to mt7921 driver, introduce mt7615_mutex_acquire/release in
mt7615_sta_set_decap_offload in order to avoid sending mcu commands
while the device is in low-power state.
Fixes: d4b98c63d7 ("mt76: mt7615: add support for rx decapsulation offload")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix transmitting packets hangs with continuing to pull the pending packet
from mac80211 queues when receiving Tx status notification from the device.
Fixes: aac5104bf6 ("mt76: sdio: do not run mt76_txq_schedule directly")
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: YN Chen <yn.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This if statement is never true. It was supposed to have been deleted
as part of commit 454b768f9b ("mt76: mt7921: Let PCI core handle
power state and use pm_sleep_ptr()") but was missed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Don't dereference "sar_root" after it has been freed.
Fixes: f965333e49 ("mt76: mt7921: introduce ACPI SAR support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Smatch complains that:
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:428 mt7915_mac_fill_rx()
error: uninitialized symbol 'msta'.
It looks like this was supposed to be initialized to NULL.
Fixes: 0880d40871 ("mt76: connac: move mt76_connac2_reverse_frag0_hdr_trans in mt76-connac module")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
It is not meaningful to poll sta stat when there is no data traffic.
So polling sta stat when the device has transmitted data instead to save
CPU power.
That implies that it is unallowed the stat_work to work while MCU is being
initialized in the really early stage to fix the possible time to time MCU
initialization failure.
Fixes: d39b52e31a ("mt76: introduce mt76_sdio module")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Because wake_work and sdio->stat_work share the same workqueue mt76->wq,
if sdio->stat_work cannot acquire the mutex lock such as that was possibly
held up by [mt7615, mt7921]_mutex_acquire. Additionally, if
[mt7615, mt7921]_mutex_acquire was called by sdio->stat_work self, the wake
would be blocked by itself. Thus, we move the stat_work into
ieee80211_workqueue instead to break the deadlock.
Fixes: d39b52e31a ("mt76: introduce mt76_sdio module")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Since both mt7921_rx_check and mt7921_queue_rx_skb routines are used by
all chipsets (mmio, usb and sdio), move them in mac.c and remove
duplicated code.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
remove unnecessary MT76_STATE_SUSPEND manipulation to be consistent
with the mt7921[e, s] driver.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
It is unexpected that the reset work is running simultaneously with
the suspend or resume context and it is possible that reset work is still
running even after mt7921 is suspended if we don't fix the race issue.
Thus, the suspend procedure should be waiting until the reset is completed
at the beginning and ignore the subsequent the reset requests.
In case there is an error that happens during either suspend or resume
handler, we will schedule a reset task to recover the error before
returning the error code to ensure we can immediately fix the error there.
Fixes: df3e4143ba ("mt76: mt7921u: add suspend/resume support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
It is unexpected that the reset work is running simultaneously with
the suspend or resume context and it is possible that reset work is still
running even after mt7921 is suspended if we don't fix the race issue.
Thus, the suspend procedure should be waiting until the reset is completed
at the beginning and ignore the subsequent the reset requests.
In case there is an error that happens during either suspend or resume
handler, we will schedule a reset task to recover the error before
returning the error code to ensure we can immediately fix the error there.
Fixes: ca74b9b907 ("mt76: mt7921s: add reset support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
It is unexpected that the reset work is running simultaneously with
the suspend or resume context and it is possible that reset work is still
running even after mt7921 is suspended if we don't fix the race issue.
Thus, the suspend procedure should be waiting until the reset is completed
at the beginning and ignore the subsequent the reset requests.
In case there is an error that happens during either suspend or resume
handler, we will schedule a reset task to recover the error before
returning the error code to ensure we can immediately fix the error there.
Fixes: 0c1ce98846 ("mt76: mt7921: add wifi reset support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce rx_check callback support for mt7663u and mt7921u drivers.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Compared to fixed payload packets, random payload packets have better
measured EVM under the same txpower. Our tests show EVM becomes at least
2-3 dB better in test cases with high rate and long tx length, which also
aligns the testing results to proprietary driver.
Suggested-by: Jm Chen <jm.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce mt76_connac_reg_map structure in mt76-connac module since it
is used by all connac2 chipset. Align structure definitions.
This is a preliminary patch to add mt7990 chipset support.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Found by comparing with the vendor driver. Currently this affects
only the RTL8192EU, which is the only gen2 chip with 2 TX paths
supported by this driver. It's unclear what kind of effect the
mistake had in practice, since I don't have any RTL8192EU devices
to test it.
Fixes: e1547c535e ("rtl8xxxu: First stab at adding IQK calibration for 8723bu parts")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/30a59f3a-cfa9-8379-7af0-78a8f4c77cfd@gmail.com
The range of calibration time of RX DCK is quite wide from ~40us to
~1300us by experiments, and probability is about 0.1% for the cases larger
than 1000us. Though it can retry calibration and get positive result, it
will spend more time. Therefore, enlarge it to avoid warning and duplicate
calibration.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220908051257.25353-4-pkshih@realtek.com
