Simplify and lighten qed_set_link() by declaring static link modes maps
and populating them on module init. This way we save plenty of text size
at the low expense of __ro_after_init and __initconst data (the latter
will be purged after module init is done).
Misc: sanitize exit callback.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These modes are relevant only for several boards, but may be reported by
MFW as well as the others.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These ports ship on new boards revisions and are supported by newer
firmware versions.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Struct field qed_hw_info::port_mode isn't used anywhere in the code, so
can be safely removed to prevent possible dead code addition.
Also remove the enumeration QED_PORT_MODE orphaned after this deletion.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reformat a few nvm_cfg* structures (and partly qed_dev) prior to adding
new fields and definitions.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Ethtool callbacks for querying and setting FEC parameters if it's
supported by the underlying qed module and MFW version running on the
device.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prior to adding new callbacks, format qede ethtool_ops structs to make
declarations more fancy and readable.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add all necessary routines for reading supported FEC modes from NVM and
querying FEC control to the MFW (if the running version supports it).
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prior to adding new fields and bitfields, reformat the related
structures according to the Linux style (spaces to tabs,
lowercase hex, indentation etc.).
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently qed driver does not take into consideration transceiver's
capabilities when generating link partner's speed advertisement. This
leads to e.g. incorrect ethtool link info on 10GbaseT modules.
Use transceiver info not only for advertisement and support arrays, but
also for link partner's abilities to fix it.
Misc: fix a couple of comments nearby.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the corresponding advertised and supported link modes according
to the detected transceiver type and device capabilities.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prior to adding new bitfields, reformat the existing ones from spaces
to tabs, and unify all hex values to lowercase.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify and lighten qede_set_link_ksettings() by declaring static link
modes maps and populating them on module init. This way we save plenty
of text size at the low expense of __ro_after_init and __initconst data
(the latter will be purged after module init is done).
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently qed driver already ran out of 32 bits to store link modes,
and this doesn't allow to add and support more speeds.
Convert custom link mode to generic Ethtool bitmap and definitions
(convenient Phylink shorthands are used for elegance and readability).
This allowed us to drop all conversions/mappings between the driver
and Ethtool.
This involves changes in qede and qedf as well, as they used definitions
from shared "qed_if.h".
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Straightforward conversion to new infra, 1 VxLAN port, handler
may sleep.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Covert to new infra. Looks like this driver was not doing
ref counting, and sleeping in the callback.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is likely firmware causing this but its starting to annoy customers.
Change the message level to verbose to prevent the spam.
Note that this seems to only show up with ISCSI enabled on the HBA via the
qedi driver.
Signed-off-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NVM config file address will be modified when the MBI image is upgraded.
Driver would return stale config values if user reads the nvm-config
(via ethtool -d) in this state. The fix is to re-populate nvm attribute
info while reading the nvm config values/partition.
Changes from previous version:
-------------------------------
v3: Corrected the formatting in 'Fixes' tag.
v2: Added 'Fixes' tag.
Fixes: 1ac4329a1c ("qed: Add configuration information to register dump and debug data")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When generating debug dump, driver firstly collects all data in binary
form, and then performs per-feature formatting to human-readable if it
is supported.
For ethtool -d, this is roughly incorrect for two reasons. First of all,
drivers should always provide only original raw dumps to Ethtool without
any changes.
The second, and more critical, is that Ethtool's output buffer size is
strictly determined by ethtool_ops::get_regs_len(), and all data *must*
fit in it. The current version of driver always returns the size of raw
data, but the size of the formatted buffer exceeds it in most cases.
This leads to out-of-bound writes and memory corruption.
Address both issues by adding an option to return original, non-formatted
debug data, and using it for Ethtool case.
v2:
- Expand commit message to make it more clear;
- No functional changes.
Fixes: c965db4446 ("qed: Add support for debug data collection")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Flow Dissector's keys are mostly Network / Big Endian. U{16,32}_MAX are
the same in either of byteorders, but let's make sparse happy with
wrapping them into noops.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the function arguments was renamed some time ago, but this
wasn't reflected in its kernel-doc comment.
Also add the description for return values.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current code assumes that both host and device operates in Little Endian
in lots of places. While this is true for x86 platform, this doesn't mean
we should not care about this.
This commit addresses all parts of the code that were pointed out by sparse
checker. All operations with restricted (__be*/__le*) types are now
protected with explicit from/to CPU conversions, even if they're noops on
common setups.
I'm sure there are more such places, but this implies a deeper code
investigation, and is a subject for future works.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use intermediate pointers instead of multiple dereferencing to
simplify and beautify parts of code that will be addressed in
the next commit.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To not mix functional and stylistic changes, correct indentation
of code that will be modified in the subsequent commits.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get rid of the kernel-doc warnings when building with W=1+ by
rewriting the problematic doc comments according to the
recommended format and style.
Note that this only fixes problems found in C source files,
headers aren't in scope for now.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the prototype of qed_hw_err_notify() with the following:
* constify "fmt" argument according to printk() declarations;
* anontate it with __cold attribute to move the function out of
the line;
* annotate it with __printf() attribute;
This eliminates W=1+ warning:
drivers/net/ethernet/qlogic/qed/qed_hw.c: In function
‘qed_hw_err_notify’:
drivers/net/ethernet/qlogic/qed/qed_hw.c:851:3: warning: function
‘qed_hw_err_notify’ might be a candidate for ‘gnu_printf’ format
attribute [-Wsuggest-attribute=format]
len = vsnprintf(buf, QED_HW_ERR_MAX_STR_SIZE, fmt, vl);
^~~
as well as saves some code size:
add/remove: 0/0 grow/shrink: 2/4 up/down: 40/-125 (-85)
Function old new delta
qed_dmae_execute_command 1680 1711 +31
qed_spq_post 1104 1113 +9
qed_int_sp_dpc 3554 3545 -9
qed_mcp_cmd_and_union 1896 1876 -20
qed_hw_err_notify 395 352 -43
qed_mcp_handle_events 2630 2577 -53
Total: Before=368645, After=368560, chg -0.02%
__printf() will also be helpful with catching bad format strings
and arguments.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix several sparse warnings by moving structs declarations into
the corresponding header files:
drivers/net/ethernet/qlogic/qed/qed_dcbx.c:2402:32: warning:
symbol 'qed_dcbnl_ops_pass' was not declared. Should it be static?
drivers/net/ethernet/qlogic/qed/qed_ll2.c:2754:26: warning: symbol
'qed_ll2_ops_pass' was not declared. Should it be static?
drivers/net/ethernet/qlogic/qed/qed_ptp.c:449:30: warning: symbol
'qed_ptp_ops_pass' was not declared. Should it be static?
drivers/net/ethernet/qlogic/qed/qed_sriov.c:5265:29: warning:
symbol 'qed_iov_ops_pass' was not declared. Should it be static?
(some of them were declared twice in different header files)
Also make qed_hw_err_type_descr[] const while at it.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Static variables (and functions, unless they're inline) should not
be declared in header files.
Move the static array iro_arr[] from "qed_hsi.h" to the sole place
where it's used, "qed_init_ops.c". This eliminates lots of warnings
(42 of them actually) against W=1+:
In file included from drivers/net/ethernet/qlogic/qed/qed.h:51:0,
from drivers/net/ethernet/qlogic/qed/qed_ooo.c:40:
drivers/net/ethernet/qlogic/qed/qed_hsi.h:4421:18: warning: 'iro_arr'
defined but not used [-Wunused-const-variable=]
static const u32 iro_arr[] = {
^~~~~~~
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With legacy PM, drivers themselves were responsible for managing the
device's power states and taking care of register states. And they use PCI
helper functions to do it.
After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.
.suspend() calls __qlcnic_shutdown, which then calls qlcnic_82xx_shutdown;
.resume() calls __qlcnic_resume, which then calls qlcnic_82xx_resume;
Both ...82xx..() are define in
drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c and are used only in
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c.
Hence upgrade them and remove PCI function calls, like pci_save_state() and
pci_enable_wake(), inside them
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states. And they use PCI
helper functions to do it.
After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.
In this driver:
netxen_nic_resume() calls netxen_nic_attach_func() which then invokes PCI
helper functions like pci_enable_device(), pci_set_power_state() and
pci_restore_state(). Other function:
- netxen_io_slot_reset()
also calls netxen_nic_attach_func().
Also, netxen_io_slot_reset() returns specific value based on the return value
of netxen_nic_attach_func() as whole. Thus, cannot simply move some piece of
code from netxen_nic_attach_func() to it.
Hence, define a new function netxen_nic_attach_late_func() to do the tasks
which has to be done after PCI helper functions have done their job.
Now, netxen_nic_attach_func() invokes netxen_nic_attach_late_func(), thus
netxen_io_slot_reset() behaves normally.
And, netxen_nic_resume() calls netxen_nic_attach_late_func() to avoid PCI
helper functions calls.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix sparse build warning:
drivers/net/ethernet/qlogic/qed/qed_main.c:2480:6: warning:
symbol 'qed_hw_err_type_descr' was not declared. Should it be static?
Signed-off-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Correct already existing but wrong SPDX tags to match the actual
license.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Correct already existing but wrong SPDX tags to match the actual
license.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error DBG_STATUS_NO_MATCHING_FRAMING_MODE was added to the enum
enum dbg_status however there is a missing corresponding entry for
this in the array s_status_str. This causes an out-of-bounds read when
indexing into the last entry of s_status_str. Fix this by adding in
the missing entry.
Addresses-Coverity: ("Out-of-bounds read").
Fixes: 2d22bc8354 ("qed: FW 8.42.2.0 debug features")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable 'abs_ppfid' in qed_dev.c:qed_llh_add_mac_filter() always gets
printed, but is initialized only under 'ref_cnt == 1' condition. This
results in:
In file included from ./include/linux/kernel.h:15:0,
from ./include/asm-generic/bug.h:19,
from ./arch/x86/include/asm/bug.h:86,
from ./include/linux/bug.h:5,
from ./include/linux/io.h:11,
from drivers/net/ethernet/qlogic/qed/qed_dev.c:35:
drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_add_mac_filter':
./include/linux/printk.h:358:2: warning: 'abs_ppfid' may be used uninitialized
in this function [-Wmaybe-uninitialized]
printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~
drivers/net/ethernet/qlogic/qed/qed_dev.c:983:17: note: 'abs_ppfid' was declared
here
u8 filter_idx, abs_ppfid;
^~~~~~~~~
...under W=1+.
Fix this by initializing it with zero.
Fixes: 79284adeb9 ("qed: Add llh ppfid interface and 100g support for offload protocols")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sizes of all ILT blocks must be reset before ILT recomputing when
disabling clients, or memory allocation may exceed ILT shadow array
and provoke system crashes.
Fixes: 1408cc1fa4 ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently PTP cyclecounter and timecounter are initialized only on
the first probing and are cleaned up during removal. This means that
PTP becomes non-functional after device recovery.
Fix this by unconditional PTP initialization on probing and clearing
Tx pending bit on exiting.
Fixes: ccc67ef50b ("qede: Error recovery process")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is likely a copy'n'paste mistake. The amount of ILT lines to
reserve for a single VF was being multiplied by the total VFs count.
This led to a huge redundancy in reservation and potential lines
drainouts.
Fixes: 1408cc1fa4 ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
25ms sleep cycles in waiting for PF response are excessive and may lead
to different timeout failures.
Start to wait with short udelays, and in most cases polling will end
here. If the time was not sufficient, switch to msleeps.
usleep_range() may go far beyond 100us depending on platform and tick
configuration, hence atomic udelays for consistency.
Also add explicit DMA barriers since 'done' always comes from a shared
request-response DMA pool, and note that in the comment nearby.
Fixes: 1408cc1fa4 ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set rdma_wq pointer to NULL after destroying the workqueue and check
for it when adding new events to fix crashes on driver unload.
Fixes: cee9fbd8e2 ("qede: Add qedr framework")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qed_spq_unregister_async_cb() should be called before
qed_rdma_info_free() to avoid crash-spawning uses-after-free.
Instead of calling it from each subsystem exit code, do it in one place
on PF down.
Fixes: 291d57f67d ("qed: Fix rdma_info structure allocation")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
