Setting ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear
routine as done by commit 0e80707d94 ("net: ethernet: mtk_eth_soc:
fix typo in __mtk_foe_entry_clear") breaks flow offloading, at least
on older MTK_NETSYS_V1 SoCs, OpenWrt users have confirmed the bug on
MT7622 and MT7621 systems.
Felix Fietkau suggested to use MTK_FOE_STATE_INVALID instead which
works well on both, MTK_NETSYS_V1 and MTK_NETSYS_V2.
Tested on MT7622 (Linksys E8450) and MT7986 (BananaPi BPI-R3).
Suggested-by: Felix Fietkau <nbd@nbd.name>
Fixes: 0e80707d94 ("net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear")
Fixes: 33fc42de33 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/YzY+1Yg0FBXcnrtc@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As sizeof(hwe->data) can now longer be used as the actual size depends
on foe_entry_size, in commit 9d8cb4c096
("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") the
use of sizeof(hwe->data) is hence replaced.
However, replacing it with ppe->eth->soc->foe_entry_size is wrong as
foe_entry_size represents the size of the whole descriptor and not just
the 'data' field.
Fix this by subtracing the size of the only other field in the struct
'ib1', so we actually end up with the correct size to be copied to the
data field.
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Fixes: 9d8cb4c096 ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/YzBqPIgQR2gLrPoK@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In function mtk_foe_entry_set_vlan() the call to field accessor macro
FIELD_GET(MTK_FOE_IB1_BIND_VLAN_LAYER, entry->ib1)
has been wrongly replaced by
mtk_prep_ib1_vlan_layer(eth, entry->ib1)
Use correct helper function mtk_get_ib1_vlan_layer instead.
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Fixes: 03a3180e5c ("net: ethernet: mtk_eth_soc: introduce flow offloading support for mt7986")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/YzBp+Kk04CFDys4L@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce foe_entry_size to mtk_eth_soc data structure since mt7986
relies on a bigger mtk_foe_entry data structure.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine.
Fixes: 33fc42de33 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The __mtk_foe_entry_clear() function frees "entry" so we have to use
the _safe() version of hlist_for_each_entry() to prevent a use after
free.
Fixes: 33fc42de33 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will be used to implement a limited form of bridge offloading.
Since the hardware does not support flow table entries with just source
and destination MAC address, the driver has to emulate it.
The hardware automatically creates entries entries for incoming flows, even
when they are bridged instead of routed, and reports when packets for these
flows have reached the minimum PPS rate for offloading.
After this happens, we look up the L2 flow offload entry based on the MAC
header and fill in the output routing information in the flow table.
The dynamically created per-flow entries are automatically removed when
either the hardware flowtable entry expires, is replaced, or if the offload
rule they belong to is removed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to MediaTek, this feature is not supported in current hardware
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hardware was designed to handle flow detection and creation of flow entries
by itself, relying on the software primarily for filling in egress routing
information.
When there is a hash collision between multiple flows, this allows the hardware
to maintain the entry for the most active flow.
Additionally, the hardware only keeps offloading active for entries with at
least 30 packets per second.
With this rework, the code no longer creates a hardware entries directly.
Instead, the hardware entry is only created when the PPE reports a matching
unbound flow with the minimum target rate.
In order to reduce CPU overhead, looking for flows belonging to a hash entry
is rate limited to once every 100ms.
This rework is also used as preparation for emulating bridge offload by
managing L4 offload entries on demand.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preparation for adding more data to it, which will increase its size.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows hardware flow offloading from Ethernet to WLAN on MT7622 SoC
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
The intention is for the loop to timeout if the body does not succeed.
The current logic calls time_is_before_jiffies(timeout) which is false
until after the timeout, so the loop body never executes.
Fix by using readl_poll_timeout as a more standard and less error-prone
solution.
Fixes: ba37b7caf1 ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliminate the following coccicheck warning:
drivers/net/ethernet/mediatek/mtk_ppe.c:270:2-3: Unneeded semicolon
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PPE (packet processing engine) is used to offload NAT/routed or even
bridged flows. This patch brings up the PPE and uses it to get a packet
hash. It also contains some functionality that will be used to bring up
flow offloading.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
