The PinePhone keyboard case contains a battery managed by an integrated
power bank IC. The power bank IC communicates over I2C, and the keyboard
MCU firmware provides an interface to read and write its registers.
Let's use this interface to implement a SMBus adapter, so we can reuse
the driver for the power bank IC.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220618165747.55709-4-samuel@sholland.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Both i.MX6 and i.MX8 reference manuals list 0xBF8 as SNVS_HPVIDR1
(chapters 57.9 and 6.4.5 respectively).
Without this, trying to read the revision number results in 0 on
all revisions, causing the i.MX6 quirk to apply on all platforms,
which in turn causes the driver to synthesise power button release
events instead of passing the real one as they happen even on
platforms like i.MX8 where that's not wanted.
Fixes: 1a26c92071 ("Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q")
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4599101.ElGaqSPkdT@pliszka
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.
Currently, the driver never calls fwnode_handle_put(). This patch
adds the missing calls.
Fixes: ce1cb0eec8 ("input: keyboard: Add support for Azoteq IQS620A/621/622/624/625")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/YyYbYvlkq5cy55dc@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use firmware properties (eg: OF) to get the device specific
configuration. This change just replaces the platform data since there
was no platform using it and so, it makes no sense having both.
Special note to the PULL-UP disable setting that is now supported as
part of the gpio subsystem (using 'set_config()' callback).
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-5-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This change replaces the support for GPIs as key event generators.
Instead of reporting the events directly, we add a gpio based irqchip
so that these events can be consumed by keys defined in the gpio-keys
driver (as it's goal is indeed for keys on GPIOs capable of generating
interrupts). With this, the gpio-adp5588 driver can also be dropped.
The basic idea is that all the pins that are not being used as part of
the keymap matrix can be possibly requested as GPIOs by gpio-keys
(it's also fine to use these pins as plain interrupts though that's not
really the point).
Since the gpiochip now also has irqchip capabilities, we should only
remove it after we free the device interrupt (otherwise we could, in
theory, be handling GPIs interrupts while the gpiochip is concurrently
removed). Thus the call 'adp5588_gpio_add()' is moved and since the
setup phase also needs to come before making the gpios visible, we also
need to move 'adp5588_setup()'.
While at it, always select GPIOLIB so that we don't need to use #ifdef
guards.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-2-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov:
- changes to input core to properly queue synthetic events (such as
autorepeat) and to release multitouch contacts when an input device
is inhibited or suspended
- reworked quirk handling in i8042 driver that consolidates multiple
DMI tables into one and adds several quirks for TUXEDO line of
laptops
- update to mt6779 keypad to better reflect organization of the
hardware
- changes to mtk-pmic-keys driver preparing it to handle more variants
- facelift of adp5588-keys driver
- improvements to iqs7222 driver
- adjustments to various DT binding documents for input devices
- other assorted driver fixes.
* tag 'input-for-v5.20-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
Input: adc-joystick - fix ordering in adc_joystick_probe()
dt-bindings: input: ariel-pwrbutton: use spi-peripheral-props.yaml
Input: deactivate MT slots when inhibiting or suspending devices
Input: properly queue synthetic events
dt-bindings: input: iqs7222: Use central 'linux,code' definition
Input: i8042 - add dritek quirk for Acer Aspire One AO532
dt-bindings: input: gpio-keys: accept also interrupt-extended
dt-bindings: input: gpio-keys: reference input.yaml and document properties
dt-bindings: input: gpio-keys: enforce node names to match all properties
dt-bindings: input: Convert adc-keys to DT schema
dt-bindings: input: Centralize 'linux,input-type' definition
dt-bindings: input: Use common 'linux,keycodes' definition
dt-bindings: input: Centralize 'linux,code' definition
dt-bindings: input: Increase maximum keycode value to 0x2ff
Input: mt6779-keypad - implement row/column selection
Input: mt6779-keypad - match hardware matrix organization
Input: i8042 - add additional TUXEDO devices to i8042 quirk tables
Input: goodix - switch use of acpi_gpio_get_*_resource() APIs
Input: i8042 - add TUXEDO devices to i8042 quirk tables
Input: i8042 - add debug output for quirks
...
MediaTek keypad has 2 modes of detecting key events:
- single key: each (row, column) can detect one key
- double key: each (row, column) is a group of 2 keys
Double key support exists to minimize cost, since it reduces the number
of pins required for physical keys.
Double key is configured by setting BIT(0) of the KP_SEL register.
Enable double key matrix support based on the mediatek,keys-per-group
device tree property.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220720-mt8183-keypad-v2-5-6d42c357cb76@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
The MediaTek keypad has a total of 6 input rows and 6 input columns.
By default, rows/columns 0-2 are enabled.
This is controlled by the KP_SEL register:
- bits[9:4] control row selection
- bits[15:10] control column selection
Each bit enables the corresponding row/column number (e.g KP_SEL[4]
enables ROW0)
Depending on how the keypad is wired, this may result in wrong readings
of the keypad state.
Program the KP_SEL register to limit the key detection to n_rows,
n_cols we retrieve from the device tree.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220707075236.126631-3-mkorpershoek@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The MediaTek keypad has a set of bits representing keys,
from KEY0 to KEY77, arranged in 5 chunks of 15 bits split into 5 32-bit
registers.
In our implementation, we simply decided to use register number as row
and offset in the register as column when encoding our "matrix".
Because of this, we can have a 5x32 matrix which does not match the
hardware at all, which is confusing.
Change the row/column calculation to match the hardware.
Fixes: f28af984e7 ("Input: mt6779-keypad - add MediaTek keypad driver")
Co-developed-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220707075236.126631-2-mkorpershoek@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This driver abuses the efivar API, by using a few of its helpers on
entries that were not instantiated by the API itself. This is a problem
as future cleanup work on efivars is complicated by this.
So let's just switch to the get/set variable runtime wrappers directly.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 this program is distributed as is
without any warranty of any kind whether express or implied without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the second and last step of preparation to add support for more
PMICs in this driver, move the long press debounce mask to struct
mtk_pmic_regs and use that in mtk_pmic_keys_lp_reset_setup() instead
of directly using the definition.
While at it, remove the definition for MTK_PMIC_RST_DU_SHIFT as we
are able to calculate it dynamically and spares us some unnecessary
new definitions around for future per-PMIC variations of RST_DU_MASK.
Lastly, it was necessary to change the function signature of
mtk_pmic_keys_lp_reset_setup() to now pass a pointer to the main
mtk_pmic_regs structure, since that's where the reset debounce
mask now resides.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220524093505.85438-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov:
- a new driver for the Azoteq IQS7222A/B/C capacitive touch controller
- a new driver for Raspberry Pi Sense HAT joystick
- sun4i-lradc-keys gained support of R329 and D1 variants, plus it can
be now used as a wakeup source
- pm8941-pwrkey can now properly handle PON GEN3 variants; the driver
also implements software debouncing and has a workaround for missing
key press events
- assorted driver fixes and cleanups
* tag 'input-for-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits)
Input: stmfts - do not leave device disabled in stmfts_input_open
Input: gpio-keys - cancel delayed work only in case of GPIO
Input: cypress_ps2 - fix typo in comment
Input: vmmouse - disable vmmouse before entering suspend mode
dt-bindings: google,cros-ec-keyb: Fixup bad compatible match
Input: cros-ec-keyb - allow skipping keyboard registration
dt-bindings: google,cros-ec-keyb: Introduce switches only compatible
Input: psmouse-smbus - avoid flush_scheduled_work() usage
Input: bcm-keypad - remove unneeded NULL check before clk_disable_unprepare
Input: sparcspkr - fix refcount leak in bbc_beep_probe
Input: sun4i-lradc-keys - add support for R329 and D1
Input: sun4i-lradc-keys - add optional clock/reset support
dt-bindings: input: sun4i-lradc-keys: Add R329 and D1 compatibles
Input: sun4i-lradc-keys - add wakeup support
Input: pm8941-pwrkey - simulate missed key press events
Input: pm8941-pwrkey - add software key press debouncing support
Input: pm8941-pwrkey - add support for PON GEN3 base addresses
Input: pm8941-pwrkey - fix error message
Input: synaptics-rmi4 - remove unnecessary flush_workqueue()
Input: ep93xx_keypad - use devm_platform_ioremap_resource() helper
...
