[Why]
If psr_feature_enable is set to true by default, it continues to be enabled
for non capable links.
[How]
explicitly disable the feature on links that are not capable of the same.
Fixes: 8c322309e4 ("drm/amd/display: Enable PSR")
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15+
Pull hyperv updates from Wei Liu:
- Remove unnecessary delay while probing for VMBus (Stanislav
Kinsburskiy)
- Optimize vmbus_on_event (Saurabh Sengar)
- Fix a race in Hyper-V DRM driver (Saurabh Sengar)
- Miscellaneous clean-up patches from various people
* tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Replace kmap() with kmap_local_page()
drm/hyperv: Add ratelimit on error message
hyperv: simplify and rename generate_guest_id
Drivers: hv: vmbus: Split memcpy of flex-array
scsi: storvsc: remove an extraneous "to" in a comment
Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization
Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability
Drivers: hv: vmbus: Fix kernel-doc
drm/hyperv: Don't overwrite dirt_needed value set by host
Drivers: hv: vmbus: Optimize vmbus_on_event
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
Pull Kbuild updates from Masahiro Yamada:
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing
particular sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
docs: bump minimal GNU Make version to 3.82
ia64: simplify esi object addition in Makefile
Revert "kbuild: Check if linker supports the -X option"
kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
zstd: Fixing mixed module-builtin objects
kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
kallsyms: take the input file instead of reading stdin
kallsyms: drop duplicated ignore patterns from kallsyms.c
kbuild: reuse mksysmap output for kallsyms
mksysmap: update comment about __crc_*
kbuild: remove head-y syntax
kbuild: use obj-y instead extra-y for objects placed at the head
kbuild: hide error checker logs for V=1 builds
kbuild: re-run modpost when it is updated
kbuild: unify two modpost invocations
kbuild: move vmlinux.o rule to the top Makefile
kbuild: move .vmlinux.objs rule to Makefile.modpost
kbuild: list sub-directories in ./Kbuild
Makefile.compiler: replace cc-ifversion with compiler-specific macros
...
Patch which added graceful exit for non-persistent contexts missed the
fact it is not enough to set the exiting flag on a context and let the
backend handle it from there.
GuC backend cannot handle it because it runs independently in the
firmware and driver might not see the requests ever again. Patch also
missed the fact some usages of intel_context_is_banned in the GuC backend
needed replacing with newly introduced intel_context_is_schedulable.
Fix the first issue by calling into backend revoke when we know this is
the last chance to do it. Fix the second issue by replacing
intel_context_is_banned with intel_context_is_schedulable, which should
always be safe since latter is a superset of the former.
v2:
* Just call ce->ops->revoke unconditionally. (Andrzej)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 45c64ecf97 ("drm/i915: Improve user experience and driver robustness under SIGINT or similar")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003121630.694249-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 0add082cebac8555ee3972ba768ae5c01db7a498)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Pull driver core updates from Greg KH:
"Here is the big set of driver core and debug printk changes for
6.1-rc1. Included in here is:
- dynamic debug updates for the core and the drm subsystem. The drm
changes have all been acked by the relevant maintainers
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they were
not being used and they really did not actually do anything)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
docs: filesystems: sysfs: Make text and code for ->show() consistent
Documentation: NBD_REQUEST_MAGIC isn't a magic number
a.out: restore CMAGIC
device property: Add const qualifier to device_get_match_data() parameter
drm_print: add _ddebug descriptor to drm_*dbg prototypes
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: optimize drm_debug_enabled for jump-label
drm-print: add drm_dbg_driver to improve namespace symmetry
drm-print.h: include dyndbg header
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm_print: interpose drm_*dbg with forwarding macros
drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
drm_print: condense enum drm_debug_category
debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
Documentation: ENI155_MAGIC isn't a magic number
Documentation: NBD_REPLY_MAGIC isn't a magic number
nbd: remove define-only NBD_MAGIC, previously magic number
Documentation: FW_HEADER_MAGIC isn't a magic number
Documentation: EEPROM_MAGIC_VALUE isn't a magic number
...
Pull drm fix from Dave Airlie:
"This reverts the patch I found with rough bisection to instability
around fences and the oops I got from netconsole.
sched:
- revert patch causing oopses"
* tag 'drm-next-2022-10-07-1' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/sched: Use parent fence instead of finished"
amdkfd_total_mem_size is the size of total GPUs vram plus system memory
to estimate page tables memory usage and leave enough VRAM room for page
tables allocation.
Calculate amdkfd_total_mem_size in amdgpu_amdkfd_device_probe is
incorrect because adev->gmc.real_vram_size is still 0 called from
amdgpu_device_ip_early_init. Move the calculation
to amdgpu_amdkfd_device_init to get the correct VRAM size.
Do reverse calculation in amdgpu_amdkfd_device_fini_sw to support
hot-unplugging GPUs.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under VRAM usage pression, map to GPU may fail to create pt bo and
vmbo->shadow_list is not initialized, then ttm_bo_release calling
amdgpu_bo_vm_destroy to access vmbo->shadow_list generates below
dmesg and NULL pointer access backtrace:
Set vmbo destroy callback to amdgpu_bo_vm_destroy only after creating pt
bo successfully, otherwise use default callback amdgpu_bo_destroy.
amdgpu: amdgpu_vm_bo_update failed
amdgpu: update_gpuvm_pte() failed
amdgpu: Failed to map bo to gpuvm
amdgpu 0000:43:00.0: amdgpu: Failed to map peer:0000:43:00.0 mem_domain:2
BUG: kernel NULL pointer dereference, address:
RIP: 0010:amdgpu_bo_vm_destroy+0x4d/0x80 [amdgpu]
Call Trace:
<TASK>
ttm_bo_release+0x207/0x320 [amdttm]
amdttm_bo_init_reserved+0x1d6/0x210 [amdttm]
amdgpu_bo_create+0x1ba/0x520 [amdgpu]
amdgpu_bo_create_vm+0x3a/0x80 [amdgpu]
amdgpu_vm_pt_create+0xde/0x270 [amdgpu]
amdgpu_vm_ptes_update+0x63b/0x710 [amdgpu]
amdgpu_vm_update_range+0x2e7/0x6e0 [amdgpu]
amdgpu_vm_bo_update+0x2bd/0x600 [amdgpu]
update_gpuvm_pte+0x160/0x420 [amdgpu]
amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x313/0x1130 [amdgpu]
kfd_ioctl_map_memory_to_gpu+0x115/0x390 [amdgpu]
kfd_ioctl+0x24a/0x5b0 [amdgpu]
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM buddy manager allocates the contiguous memory requests in
a single block or multiple blocks. So for the ttm move operation
(incase of low vram memory) we should consider all the blocks to
compute the total memory size which compared with the struct
ttm_resource num_pages in order to verify that the blocks are
contiguous for the eviction process.
v2: Added a Fixes tag
v3: Rewrite the code to save a bit of calculations and
variables (Christian)
Fixes: c9cad937c0 ("drm/amdgpu: add drm buddy support to amdgpu")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rectify multiple kernel-doc warnings in dcn32_fpu.c.
E.g.:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:247: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Finds dummy_latency_index when MCLK switching using firmware based
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:484: warning: Function parameter or member 'phantom_stream' not described in 'dcn32_set_phantom_stream_timing'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'dc' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'context' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'index' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'dc' not described in 'dcn32_update_bw_bounding_box_fpu'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'bw_params' not described in 'dcn32_update_bw_bounding_box_fpu'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: expecting prototype for dcn32_update_bw_bounding_box(). Prototype was for dcn32_update_bw_bounding_box_fpu() instead
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: George Shen <george.shen@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Nevenko Stupar <Nevenko.Stupar@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to fix the SDMA user queue doorbell missing issue on
SDMA 6.0. F32_WPTR_POLL_ENABLE has to be set if doorbell mode is
used. Otherwise ringing SDMA user queue doorbell can't wake up
system from gfxoff.
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
In some error path in amdgpu_sdma_init_microcode(), release_firmware() is
not called, the memory allocated in request_firmware() will be leaked,
calling amdgpu_sdma_destroy_inst_ctx() which calls release_firmware() to
avoid memory leak.
Fixes: 15aa13056d ("drm/amdgpu: add function to init SDMA microcode")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds some minor code style changes just to reduce the merge
conflicts we have when we upstream some of the VBA code.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During transition from ODM combine to ODM bypass, if DSC is enabled need
to disconnect the DSC mux for pipes no longer in use.
[How]
During ODM update, detect pipes with DSC that are no longer being used
for new state and call new DSC interface to disconnect.
Add new DSC interface to disconnect from pipe
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some reason, we missed the PState check for DCN32 which may cause
issues for clock transition. This commit add that required hook.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a missing register mask in dcn32 causing the hardware
programming is not executed when programming SQ_num test pattern for
DP2.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain features require the additional DP SDP configuration registers
DP_SEC_CNTL1 and DP_SEC_CNTL5 in order to function correctly.
The DCN32 DIO stream encoder reglist is currently missing these two
registers.
[How]
Add the missing registers to the DCN32 DIO stream encoder reglist.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In DIO stream encoder, definition of DP_DSC_MODE is changed (only
enable/disable) In OPTC, OTG_SET_V_TOTAL_MIN_MASK_EN is removed (same as
DCN3.1)
[How]
In DIO stream encoder, update enc32_dp_set_dsc_config(). In OPTC, use
DCN3.1 version for function interfaces .set_vrr_m_const and .set_drr
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW?]
When merging ODM pipes that are using MPO, we must copy the stream_res
from the new top pipe to the bottom pipe so that the overlayed plane is
not pointing to the wrong stream assets.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At some point, we decided to blank HUBP during pixel data blank, and to
handle that, we added some OPTC lock checks. Later, we realized that
this change caused multiple regression, and we removed it. Nevertheless,
we still have some leftovers that might affect some ASIC behavior, and
this commit drops those changes to keep the code consistent.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SubVP has some issues related to how we allocate and enable it. This
commit fixes this behavior by adding the proper check and configuration
to the SubVP code path.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN provides a hook to check if we can have a new pipe allocation based
on some DC constraints. If the current configuration supports the new
pipe request, DC updates its context; otherwise, it will keep the same
configuration. This behavior is similar across multiple ASICs, and for
this reason, we reused DCN20 on DCN321. However, this DCN32x has some
peculiarities which require its function to avoid weird pipe split
issues. This commit update this issue by using
dcn32_acquire_idle_pipe_for_head_pipe_in_layer instead of
dcn20_acquire_idle_pipe_for_layer.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under DCN32/321 we identified some code paths that DC never executes.
This commit removes those unused codes to avoid distractions when
debugging issues.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
when dynamic odm was turned on, there is also logic to halve the pixelclk
this still turned on when we avoided odm in the case of odd h_total timings
how:
block the pixel clk mechanism also in the case of odd h_total timings
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[how]
Large deltas for periodic interrupts could result in the interrupt not
being programmed properly and thus not firing.
[why]
Add proper wrap-around support for calculating VUPDATE and VLINE
positions.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Clocks are updating based on the incoming context's support, however the new
compbuf size is not programmed prior to udpating clocks, which can result in
P-State hangs.
[HOW?]
Increase compbuf size prior to updating clocks.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN315 has to always allow pstate change or SMU will hang. This
workaround achieves this by applying a low pstate change latency
to be used when pstate is calculated to be unsupported. This lower
latency only accounts for memory retraining; a previous change
handles locking in the highest available pstate allowing us to minimize
required latency hiding to only account for memory retraining.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of
minimal transition too often. Commit state of dc with no check
will do pipeline setup which may re-initialize the component with no
need such as audio.
[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For SubVP pipe split case we need to use a minimial transition
when opening MPO video since we are transitioning from 4 pipes
to 3 pipes where an OPP for a previous MPCC will change
- Also save and restore mall config when doing fast_validate in case
there was a shallow copy of the dc->current_state
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
