Pull drm updates from Dave Airlie:
"Highlights:
- New driver for logicvc - which is a display IP core.
- EDID parser rework to add new extensions
- fbcon scrolling improvements
- i915 has some more DG2 work but not enabled by default, but should
have enough features for userspace to work now.
Otherwise it's lots of work all over the place. Detailed summary:
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution"
* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
drm/amdgpu: enable support for psp 13.0.4 block
drm/amdgpu: add files for PSP 13.0.4
drm/amdgpu: add header files for MP 13.0.4
drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
drm/amdgpu: send msg to IMU for the front-door loading
drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
drm/amdgpu: fix hive reference leak when reflecting psp topology info
drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
drm/amd/pm: update driver if header for SMU 13.0.0
drm/amdgpu: move mes self test after drm sched re-started
drm/amdgpu: drop non-necessary call trace dump
drm/amdgpu: enable VCN cg and JPEG cg/pg
drm/amdgpu: vcn_4_0_2 video codec query
drm/amdgpu: add VCN_4_0_2 firmware support
drm/amdgpu: add VCN function in NBIO v7.7
drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
drm/amd/amdgpu: add memory training support for PSP_V13
drm/amdkfd: remove an unnecessary amdgpu_bo_ref
drm/amd/pm: Add get_gfx_off_status interface for yellow carp
...
This patch re-introduces support for GuC v69 in parallel to v70. As this
is a quick fix, v69 has been re-introduced as the single "fallback" guc
version in case v70 is not available on disk and only for platforms that
are out of force_probe and require the GuC by default. All v69 specific
code has been labeled as such for easy identification, and the same was
done for all v70 functions for which there is a separate v69 version,
to avoid accidentally calling the wrong version via the unlabeled name.
When the fallback mode kicks in, a drm_notice message is printed in
dmesg to inform the user of the required update. The existing
logging of the fetch function has also been updated so that we no
longer complain immediately if we can't find a fw and we only throw an
error if the fetch of both the base and fallback blobs fails.
The plan is to follow this up with a more complex rework to allow for
multiple different GuC versions to be supported at the same time.
v2: reduce the fallback to platform that require it, switch to
firmware_request_nowarn(), improve logs.
Fixes: 2584b3549f ("drm/i915/guc: Update to GuC version 70.1.1")
Link: https://lists.freedesktop.org/archives/intel-gfx/2022-July/301640.html
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220718230732.1409641-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 774ce1510e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A new PVC+DG2 workaround has appeared recently:
- Wa_16015675438
And a couple existing DG2 workarounds have been extended to PVC:
- Wa_14015795083
- Wa_18018781329
Note that Wa_16015675438 asks us to program a register that is in the
0x2xxx range typically associated with the RCS engine, even though PVC
does not have an RCS. By default the GuC will think we've made a
mistake and throw an exception when it sees this register on a CCS
engine's save/restore list, so we need to pass an extra GuC control flag
to tell it that this is expected and not a problem.
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608005108.3717895-1-matthew.d.roper@intel.com
Initiating a reset when the command streamer is not idle or in the
middle of executing an MI_FORCE_WAKE can result in a hang. Multiple
command streamers can be part of a single reset domain, so resetting one
would mean resetting all command streamers in that domain.
To workaround this, before initiating a reset, ensure that all command
streamers within that reset domain are either IDLE or are not executing
a MI_FORCE_WAKE.
Enable GuC PRE_PARSER WA bit so that GuC follows the WA sequence when
initiating engine-resets.
For gt-resets, ensure that i915 applies the WA sequence.
Opens to address in future patches:
- The part of the WA to wait for pending forcewakes is also applicable
to execlists backend.
- The WA also needs to be applied for gen11
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-3-umesh.nerlige.ramappa@intel.com
The latest GuC firmware drops the context descriptor pool in favour of
passing all creation data in the create H2G. It also greatly simplifies
the work queue and removes the process descriptor used for multi-LRC
submission. So, remove all mention of LRC and process descriptors and
update the registration code accordingly.
Unfortunately, the new API also removes the ability to set default
values for the scheduling policies at context registration time.
Instead, a follow up H2G must be sent. The individual scheduling
policy update H2G commands are also dropped in favour of a single KLV
based H2G. So, change the update wrappers accordingly and call this
during context registration..
Of course, this second H2G per registration might fail due to being
backed up. The registration code has a complicated state machine to
cope with the actual registration call failing. However, if that works
then there is no support for unwinding if a further call should fail.
Unwinding would require sending a H2G to de-register - but that can't
be done because the CTB is already backed up.
So instead, add a new flag to say whether the context has a pending
policy update. This is set if the policy H2G fails at registration
time. The submission code checks for this flag and retries the policy
update if set. If that call fails, the submission path early exists
with a retry error. This is something that is already supported for
other reasons.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220412225955.1802543-2-John.C.Harrison@Intel.com
Update GuC ADS size allocation to include space for
the lists of error state capture register descriptors.
Then, populate GuC ADS with the lists of registers we want
GuC to report back to host on engine reset events. This list
should include global, engine-class and engine-instance
registers for every engine-class type on the current hardware.
Ensure we allocate a persistent store for the register lists
that are populated into ADS so that we don't need to allocate
memory during GT resets when GuC is reloaded and ADS population
happens again.
NOTE: Start with a sample static table of register lists to
layout the framework before adding real registers in subsequent
patch. This static register tables are a different format from
the ADS populated list.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-2-alan.previn.teres.alexis@intel.com
GuC has its own steering mechanism and can't use the default set by i915,
so we need to provide the steering information that the FW will need to
save/restore registers while processing an engine reset. The GUC
interface allows us to do so as part of the register save/restore list
and it requires us to specify the steering for all multicast register, even
those that would be covered by the default setting for cpu access. Given
that we do not distinguish between registers that do not need steering and
registers that are guaranteed to work the default steering, we set the
steering for all entries in the guc list that do not require a special
steering (e.g. mslice) to the default settings; this will cost us a few
extra writes during engine reset but allows us to keep the steering
logic simple.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314234203.799268-3-matthew.d.roper@intel.com
Update to the latest GuC release.
The latest GuC firmware introduces a number of interface changes:
GuC may return NO_RESPONSE_RETRY message for requests sent over CTB.
Add support for this reply and try resending the request again as a
new CTB message.
A KLV (key-length-value) mechanism is now used for passing
configuration data such as CTB management.
With the new KLV scheme, the old CTB management actions are no longer
used and are removed.
Register capture on hang is now supported by GuC. Full i915 support
for this will be added by a later patch. A minimum support of
providing capture memory and register lists is required though, so add
that in.
The device id of the current platform needs to be provided at init time.
The 'poll CS' w/a (Wa_22012773006) was blanket enabled by previous
versions of GuC. It must now be explicitly requested by the KMD. So,
add in the code to turn it on when relevant.
The GuC log entry format has changed. This requires adding a new field
to the log header structure to mark the wrap point at the end of the
buffer (as the buffer size is no longer a multiple of the log entry
size).
New CTB notification messages are now sent for some things that were
previously only sent via MMIO notifications.
Of these, the crash dump notification was not really being handled by
i915. It called the log flush code but that only flushed the regular
debug log and then only if relay logging was enabled. So just report
an error message instead.
The 'exception' notification was just being ignored completely. So add
an error message for that as well.
Note that in either the crash dump or the exception case, the GuC is
basically dead. The KMD will detect this via the heartbeat and trigger
both an error log (which will include the crash dump as part of the
GuC log) and a GT reset. So no other processing is really required.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107000622.292081-3-John.C.Harrison@Intel.com
With GuC handling scheduling, i915 is not aware of the time that a
context is scheduled in and out of the engine. Since i915 pmu relies on
this info to provide engine busyness to the user, GuC shares this info
with i915 for all engines using shared memory. For each engine, this
info contains:
- total busyness: total time that the context was running (total)
- id: id of the running context (id)
- start timestamp: timestamp when the context started running (start)
At the time (now) of sampling the engine busyness, if the id is valid
(!= ~0), and start is non-zero, then the context is considered to be
active and the engine busyness is calculated using the below equation
engine busyness = total + (now - start)
All times are obtained from the gt clock base. For inactive contexts,
engine busyness is just equal to the total.
The start and total values provided by GuC are 32 bits and wrap around
in a few minutes. Since perf pmu provides busyness as 64 bit
monotonically increasing values, there is a need for this implementation
to account for overflows and extend the time to 64 bits before returning
busyness to the user. In order to do that, a worker runs periodically at
frequency = 1/8th the time it takes for the timestamp to wrap. As an
example, that would be once in 27 seconds for a gt clock frequency of
19.2 MHz.
Note:
There might be an over-accounting of busyness due to the fact that GuC
may be updating the total and start values while kmd is reading them.
(i.e kmd may read the updated total and the stale start). In such a
case, user may see higher busyness value followed by smaller ones which
would eventually catch up to the higher value.
v2: (Tvrtko)
- Include details in commit message
- Move intel engine busyness function into execlist code
- Use union inside engine->stats
- Use natural type for ping delay jiffies
- Drop active_work condition checks
- Use for_each_engine if iterating all engines
- Drop seq locking, use spinlock at GuC level to update engine stats
- Document worker specific details
v3: (Tvrtko/Umesh)
- Demarcate GuC and execlist stat objects with comments
- Document known over-accounting issue in commit
- Provide a consistent view of GuC state
- Add hooks to gt park/unpark for GuC busyness
- Stop/start worker in gt park/unpark path
- Drop inline
- Move spinlock and worker inits to GuC initialization
- Drop helpers that are called only once
v4: (Tvrtko/Matt/Umesh)
- Drop addressed opens from commit message
- Get runtime pm in ping, remove from the park path
- Use cancel_delayed_work_sync in disable_submission path
- Update stats during reset prepare
- Skip ping if reset in progress
- Explicitly name execlists and GuC stats objects
- Since disable_submission is called from many places, move resetting
stats to intel_guc_submission_reset_prepare
v5: (Tvrtko)
- Add a trylock helper that does not sleep and synchronize PMU event
callbacks and worker with gt reset
v6: (CI BAT failures)
- DUTs using execlist submission failed to boot since __gt_unpark is
called during i915 load. This ends up calling the GuC busyness unpark
hook and results in kick-starting an uninitialized worker. Let
park/unpark hooks check if GuC submission has been initialized.
- drop cant_sleep() from trylock helper since rcu_read_lock takes care
of that.
v7: (CI) Fix igt@i915_selftest@live@gt_engines
- For GuC mode of submission the engine busyness is derived from gt time
domain. Use gt time elapsed as reference in the selftest.
- Increase busyness calculation to 10ms duration to ensure batch runs
longer and falls within the busyness tolerances in selftest.
v8:
- Use ktime_get in selftest as before
- intel_reset_trylock_no_wait results in a lockdep splat that is not
trivial to fix since the PMU callback runs in irq context and the
reset paths are tightly knit into the driver. The test that uncovers
this is igt@perf_pmu@faulting-read. Drop intel_reset_trylock_no_wait,
instead use the reset_count to synchronize with gt reset during pmu
callback. For the ping, continue to use intel_reset_trylock since ping
is not run in irq context.
- GuC PM timestamp does not tick when GuC is idle. This can potentially
result in wrong busyness values when a context is active on the
engine, but GuC is idle. Use the RING TIMESTAMP as GPU timestamp to
process the GuC busyness stats. This works since both GuC timestamp and
RING timestamp are synced with the same clock.
- The busyness stats may get updated after the batch starts running.
This delay causes the busyness reported for 100us duration to fall
below 95% in the selftest. The only option at this time is to wait for
GuC busyness to change from idle to active before we sample busyness
over a 100us period.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027004821.66097-2-umesh.nerlige.ramappa@intel.com
For some users of multi-lrc, e.g. split frame, it isn't safe to preempt
mid BB. To safely enable preemption at the BB boundary, a handshake
between parent and child is needed, syncing the set of BBs at the
beginning and end of each batch. This is implemented via custom
emit_bb_start & emit_fini_breadcrumb functions and enabled by default if
a context is configured by set parallel extension.
Lastly, this patch updates the process descriptor to the correct size as
the memory used in the handshake is directly after the process
descriptor.
v2:
(John Harrison)
- Fix a few comments wording
- Add struture for parent page layout
v3:
(John Harrison)
- A structure for sync semaphore
- Use offsetof to calc address
- Update commit message
v4:
(John Harrison)
- Fix typos in comment explaining memory map of scratch page
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-20-matthew.brost@intel.com
Implement multi-lrc submission via a single workqueue entry and single
H2G. The workqueue entry contains an updated tail value for each
request, of all the contexts in the multi-lrc submission, and updates
these values simultaneously. As such, the tasklet and bypass path have
been updated to coalesce requests into a single submission.
v2:
(John Harrison)
- s/wqe/wqi
- Use FIELD_PREP macros
- Add GEM_BUG_ONs ensures length fits within field
- Add comment / white space to intel_guc_write_barrier
(Kernel test robot)
- Make need_tasklet a static function
v3:
(Docs)
- A comment for submission_stall_reason
v4:
(Kernel test robot)
- Initialize return value in bypass tasklt submit function
(John Harrison)
- Add comment near work queue defs
- Add BUILD_BUG_ON to ensure WQ_SIZE is a power of 2
- Update write_barrier comment to talk about work queue
v5:
(John Harrison)
- Fix typo in work queue comment
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-13-matthew.brost@intel.com
Add multi-lrc context registration H2G. In addition a workqueue and
process descriptor are setup during multi-lrc context registration as
these data structures are needed for multi-lrc submission.
v2:
(John Harrison)
- Move GuC specific fields into sub-struct
- Clean up WQ defines
- Add comment explaining math to derive WQ / PD address
v3:
(John Harrison)
- Add PARENT_SCRATCH_SIZE define
- Update comment explaining multi-lrc register
v4:
(John Harrison)
- Move PARENT_SCRATCH_SIZE to common file
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-9-matthew.brost@intel.com
The latest GuC firmware includes a number of interface changes that
require driver updates to match.
* Starting from Gen11, the ID to be provided to GuC needs to contain
the engine class in bits [0..2] and the instance in bits [3..6].
NOTE: this patch breaks pointer dereferences in some existing GuC
functions that use the guc_id to dereference arrays but these functions
are not used for now as we have GuC submission disabled and we will
update these functions in follow up patch which requires new IDs.
* The new GuC requires the additional data structure (ADS) and associated
'private_data' pointer to be setup. This is basically a scratch area
of memory that the GuC owns. The size is read from the CSS header.
* There is now a physical to logical engine mapping table in the ADS
which needs to be configured in order for the firmware to load. For
now, the table is initialised with a 1 to 1 mapping.
* GUC_CTL_CTXINFO has been removed from the initialization params.
* reg_state_buffer is maintained internally by the GuC as part of
the private data.
* The ADS layout has changed significantly. This patch updates the
shared structure and also adds better documentation of the layout.
* While i915 does not use GuC doorbells, the firmware now requires
that some initialisation is done.
* The number of engine classes and instances supported in the ADS has
been increased.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028145826.2949180-2-John.C.Harrison@Intel.com
Instead of relying on the workqueue, the upcoming reworked GuC
submission flow will offer the host driver indipendent control over
the execution status of each context submitted to GuC. As part of this,
the doorbell usage model has been reworked, with each doorbell being
paired to a single lrc and a doorbell ring representing new work
available for that specific context. This mechanism, however, limits
the number of contexts that can be registered with GuC to the number of
doorbells, which is an undesired limitation. To avoid this limitation,
we requested the GuC team to also provide a H2G that will allow the host
to notify the GuC of work available for a specified lrc, so we can use
that mechanism instead of relying on the doorbells. We can therefore drop
the doorbell code we currently have, also given the fact that in the
unlikely case we'd want to switch back to using doorbells we'd have to
heavily rework it.
The workqueue will still have a use in the new interface to pass special
commands, so that code has been retained for now.
With the doorbells gone and the GuC client becoming even simpler, the
existing GuC selftests don't give us any meaningful coverage so we can
remove them as well. Some selftests might come with the new code, but
they will look different from what we have now so if doesn't seem worth
it to keep the file around in the meantime.
v2: fix comments and commit message (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-3-daniele.ceraolospurio@intel.com
