ASoC: Updates for v5.20
This is a big release thus far and there will probably be more changes
to come, it's a combination of a larger than usual crop of new drivers
and some subsysetm wide cleanups from Charles rather than anything
structural. The SOF and Intel DSP code both also continue to be very
actively developed.
- Restructing of the set_fmt() callbacks to be specified in terms of
the device rather than with semantics depending on if the device is
supposed to be a CODEC or SoC, making things clearer in situations
like CODEC to CODEC links.
- Clean up of the way we flag which DAI naming scheme we use to reflect
the progress that's been made modernising things.
- Merge of more of the Intel AVS driver stack, including some board
integrations.
- New version 4 mechanism for communication with SOF DSPs.
- Suppoort for dynamically selecting the PLL to use at runtime on i.MX
platforms.
- Improvements for CODEC to CODEC support in the generic cards.
- Support for AMD Jadeite and various machines, Intel MetorLake DSPs,
Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP
TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments
TAS2780.
cec_unregister_adapter() assumes that the underlying adapter ops are
callable. For example, if the CEC adapter currently has a valid physical
address, then the unregistration procedure will invalidate the physical
address by setting it to f.f.f.f. Whence the following kernel oops
observed after removing the adv7511 module:
Unable to handle kernel execution of user memory at virtual address 0000000000000000
Internal error: Oops: 86000004 [#1] PREEMPT_RT SMP
Call trace:
0x0
adv7511_cec_adap_log_addr+0x1ac/0x1c8 [adv7511]
cec_adap_unconfigure+0x44/0x90 [cec]
__cec_s_phys_addr.part.0+0x68/0x230 [cec]
__cec_s_phys_addr+0x40/0x50 [cec]
cec_unregister_adapter+0xb4/0x118 [cec]
adv7511_remove+0x60/0x90 [adv7511]
i2c_device_remove+0x34/0xe0
device_release_driver_internal+0x114/0x1f0
driver_detach+0x54/0xe0
bus_remove_driver+0x60/0xd8
driver_unregister+0x34/0x60
i2c_del_driver+0x2c/0x68
adv7511_exit+0x1c/0x67c [adv7511]
__arm64_sys_delete_module+0x154/0x288
invoke_syscall+0x48/0x100
el0_svc_common.constprop.0+0x48/0xe8
do_el0_svc+0x28/0x88
el0_svc+0x1c/0x50
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x15c/0x160
Code: bad PC value
---[ end trace 0000000000000000 ]---
Protect against this scenario by unregistering i2c_cec after
unregistering the CEC adapter. Duly disable the CEC clock afterwards
too.
Fixes: 3b1b975003 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-3-alvin@pqrs.dk
The next call to sii8620_burst_get_tx_buf will result in off-by-one
When ctx->burst.tx_count + size == ARRAY_SIZE(ctx->burst.tx_buf). The same
thing happens in sii8620_burst_get_rx_buf.
This patch also change tx_count and tx_buf to rx_count and rx_buf in
sii8620_burst_get_rx_buf. It is unreasonable to check tx_buf's size and
use rx_buf.
Fixes: e19e9c692f ("drm/bridge/sii8620: add support for burst eMSC transmissions")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518065856.18936-1-hbh25y@gmail.com
This implements the callback added by the patch ("drm/dp: Add
wait_hpd_asserted() callback to struct drm_dp_aux").
With this change and all the two "DP AUX Endpoint" drivers changed to
use wait_hpd_asserted(), we no longer need to have an long delay in
the AUX transfer function. It's up to the panel code to make sure that
the panel is powered now. If someone tried to call the aux transfer
function without making sure the panel is powered we'll just get a
normal transfer failure.
We'll still keep the wait for HPD in the pre_enable() function. Though
it's probably not actually needed there, this driver is used in the
old mode (pre-DP AUX Endpoints) and it may be important for those
cases. If nothing else, it shouldn't cause any big problems.
NOTE: When handling the timeout for HPD we start the timer _after_
we've runtime resumed the device. This is definitely important for the
panel on my homestar which comes up 170 ms after we start timing (the
panel specifies 200 ms max). It's a little unclear how much of this
extra time is due to some internal state machine in the parade
firmware vs. debouncing but it seems to work for the two test cases I
have to do it this way.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614145327.v4.4.Ie827321ce263be52fdb8c1276f6f8cc00d78029f@changeid
Panel orientation property should be set before drm_dev_register().
Some drm driver calls drm_dev_register() in .bind(). However, most
panels sets orientation property relatively late, mostly in .get_modes()
callback, since this is when they are able to get the connector and
binds the orientation property to it, though the value should be known
when the panel is probed.
In drm_bridge_connector_init(), if a bridge is a panel bridge, use it to
set the connector's panel orientation property.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-9-hsinyi@chromium.org
This patch adds a drm bridge driver for i.MX8qm LVDS display bridge(LDB)
which is officially named as pixel mapper. The LDB has two channels.
Each of them supports up to 30bpp parallel input color format and can
map the input to VESA or JEIDA standards. The two channels can be used
simultaneously, either in dual mode or split mode. In dual mode, the
two channels output identical data. In split mode, channel0 outputs
odd pixels and channel1 outputs even pixels. This patch supports the
LDB single mode and split mode.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-13-victor.liu@nxp.com
This patch adds a drm bridge driver for i.MX8qxp LVDS display bridge(LDB)
which is officially named as pixel mapper. The LDB has two channels.
Each of them supports up to 24bpp parallel input color format and can map
the input to VESA or JEIDA standards. The two channels cannot be used
simultaneously, that is to say, the user should pick one of them to use.
Two LDB channels from two LDB instances can work together in LDB split
mode to support a dual link LVDS display. The channel indexes have to be
different. Channel0 outputs odd pixels and channel1 outputs even pixels.
This patch supports the LDB single mode and split mode.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-12-victor.liu@nxp.com
This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner.
The pixel combiner takes two output streams from a single display
controller and manipulates the two streams to support a number
of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured
as either one screen, two screens, or virtual screens. The pixel
combiner is also responsible for generating some of the control signals
for the pixel link output channel. For now, the driver only supports
the bypass mode.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com
The driver uses crypto hash functions so it needs to select CRYPTO_HASH.
This fixes build errors:
drivers/gpu/drm/bridge/ite-it6505.o: in function `it6505_hdcp_wait_ksv_list':
ite-it6505.c:(.text+0x4c26): undefined reference to `crypto_alloc_shash'
ite-it6505.c:(.text+0x4c6d): undefined reference to `crypto_shash_digest'
ite-it6505.c:(.text+0x4c7d): undefined reference to `crypto_destroy_tfm'
ite-it6505.c:(.text+0x4d69): undefined reference to `crypto_destroy_tfm'
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613150653.1310029-1-zhengbin13@huawei.com
While parsing the DT, the anx7625 driver checks for the presence of a
panel bridge on endpoint 1. If it is missing, pdata->panel_bridge stores
the error pointer and the function returns successfully without first
cleaning that variable. This is an issue since other functions later
check for the presence of a panel bridge by testing the trueness of that
variable.
In order to ensure proper behavior, zero out pdata->panel_bridge before
returning when no panel bridge is found.
Fixes: 9e82ea0fb1 ("drm/bridge: anx7625: switch to devm_drm_of_get_bridge")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613163705.1531721-1-nfraprado@collabora.com
As part of retiring the old defines used to specify DAI formats update the
hdmi_codec driver to use the modern names, including the variables in the
struct hdmi_codec_daifmt exported to the DRM drivers.
In updating this I did note that the only use of this information in DRM
drivers is to reject clock provider settings, thinking about what this
hardware is doing I rather suspect that there might not be any hardware
out there which needs the configuration so it may be worth considering
just having hdmi-codec support only clock consumer.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602103029.3498791-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
