Save the original stable pstate on ctx init and restore
it on ctx fini so that we restore a manually selected
stable pstate on ctx exit.
v2: fix init order (Alex)
v3: don't add new variable to ctx struct (Evan)
Fixes: c65b364c52 ("drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align RDNA2.x with other asics. One HDP bit per SDMA instance,
aligned with firmware. This is effectively a revert of
commit 369b7d04ba ("drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12").
On further discussions with the relevant hardware teams,
re-align the bits for SDMA.
Fixes: 369b7d04ba ("drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align aldebaran with all other asics. One HDP bit per
SDMA instance, aligned with firmware. This is effectively
a revert of
commit a0f9f85466 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12").
On further discussions with the relevant hardware teams,
re-align the bits for SDMA.
Fixes: a0f9f85466 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the case of SRIOV, the register smnMp1_PMI_3_FIFO will get an invalid
value which will cause the "shift out of bound". In Ubuntu22.04, this
issue will be checked an related call trace will be reported in dmesg.
Signed-off-by: lin cao <lin.cao@amd.com>
Reviewed-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed below checkpatch warnings and errors
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:131: CHECK: Comparison to NULL could be written "apd"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:150: CHECK: Comparison to NULL could be written "apd"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:196: CHECK: Prefer kernel type 'u64' over 'uint64_t'
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:224: CHECK: Please don't use multiple blank lines
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:226: CHECK: Comparison to NULL could be written "!adev->acp.acp_genpd"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:233: CHECK: Please don't use multiple blank lines
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:239: CHECK: Alignment should match open parenthesis
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:241: CHECK: Comparison to NULL could be written "!adev->acp.acp_cell"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:247: CHECK: Comparison to NULL could be written "!adev->acp.acp_res"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:253: CHECK: Comparison to NULL could be written "!i2s_pdata"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:350: CHECK: Alignment should match open parenthesis
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:550: ERROR: that open brace { should be on the previous line
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull drm fixes from Dave Airlie:
"This is the regular fixes pull for this week. This has a bunch of
amdgpu fixes, major one reverts the buddy allocator until it can be
tested more, otherwise just small ones, then i915 has a bunch of
fixes.
The outstanding firmware regressions reported by phoronix will
hopefully be dealt with ASAP.
amdgpu:
- revert buddy allocator support for now
- DP MST blank screen fix for specific platforms
- MEC firmware check fix for GC 10.3.7
- Deep color fix for DCE
- Fix possible divide by 0
- Coverage blend mode fix
- Fix cursor only commit timestamps
i915:
- Selftest fix
- TTM fix sg_table construction
- Error return fixes
- Fix a performance regression related to waitboost
- Fix GT resets"
* tag 'drm-fixes-2022-07-15' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Ensure valid event timestamp for cursor-only commits
drm/amd/display: correct check of coverage blend mode
drm/amd/pm: Prevent divide by zero
drm/amd/display: Only use depth 36 bpp linebuffers on DCN display engines.
drm/amdkfd: correct the MEC atomic support firmware checking for GC 10.3.7
drm/amd/display: Ignore First MST Sideband Message Return Error
drm/i915/selftests: fix subtraction overflow bug
drm/i915/gem: Look for waitboosting across the whole object prior to individual waits
drm/i915/gt: Serialize TLB invalidates with GT resets
drm/i915/gt: Serialize GRDOM access between multiple engine resets
drm/i915/ttm: fix sg_table construction
drm/i915/selftests: fix a couple IS_ERR() vs NULL tests
drm/i915: Fix vm use-after-free in vma destruction
drm/i915/guc: ADL-N should use the same GuC FW as ADL-S
drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()
drm/i915/gvt: IS_ERR() vs NULL bug in intel_gvt_update_reg_whitelist()
Revert "drm/amdgpu: add drm buddy support to amdgpu"
[Why]
Changes from "Fix for dmub outbox notification enable" need to land
in DM or DMUB outbox notification would be disabled.
[How]
Enable outbox notification only after interrupt are enabled and IRQ
handlers registered. Any pending notification will be sent by DMUB
once outbox notification is enabled.
Fixes: ed72087064 ("drm/amd/display: Fix for dmub outbox notification enable")
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
amd-drm-next-5.20-2022-07-14:
amdgpu:
- DCN3.2 updates
- DC SubVP support
- DP MST fixes
- Audio fixes
- DC code cleanup
- SMU13 updates
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11
- Soft reset for SDMA 6
- Add gfxoff status query for vangogh
- Improve BO domain pinning
- Fix timestamps for cursor only commits
- MES fixes
- DCN 3.1.4 support
- Misc fixes
- Misc code cleanup
amdkfd:
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
- fix possible list corruption on queue failure
radeon:
- Fix bogus power of two warning
UAPI:
- Unified memory for CWSR save/restore area for KFD
Proposed userspace: https://lists.freedesktop.org/archives/amd-gfx/2022-June/080952.html
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220714214716.8203-1-alexander.deucher@amd.com
The DRM_AMD_DC_DCN display engine support (Raven, Navi, and newer) has
not been building cleanly on powerpc and causes link errors due to
mixing hard- and soft-float object files:
powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float
powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o
[..]
and while patches are floating around, it's not exactly obvious what is
going on.
The problem bisects to commit 41b7a347bf ("powerpc: Book3S 64-bit
outline-only KASAN support") but that is probably more about changing
config variables than the fundamental cause.
Despite the bisection result, a more directly related commit seems to be
26f4712aed ("drm/amd/display: move FPU related code from dcn31 to
dml/dcn31 folder"). It's probably a combination of the two.
This has been going on since the merge window, without any final word.
So instead of blindly applying patches that may or may not be the right
thing, let's disable this for now.
As Michael Ellerman says:
"IIUIC this code was never enabled on ppc before, so disabling it seems
like a reasonable fix to get the build clean"
and once we have more actual feedback (and find any potential users) we
can always re-enable it with the patch that fixes the issues and
back-port as necessary.
Fixes: 41b7a347bf ("powerpc: Book3S 64-bit outline-only KASAN support")
Fixes: 26f4712aed ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/20220606153910.GA1773067@roeck-us.net/
Link: https://lore.kernel.org/all/20220618232737.2036722-1-linux@roeck-us.net/
Link: https://lore.kernel.org/all/20220713050724.GA2471738@roeck-us.net/
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Display mode library for DCN 3.1.4
v2: squash in checkpatch fix (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display Core support for DCN 3.1.4
v2:(squash)fix non-x86 in dc/dcn314/Makefile
Properly handle PPC as well. (Alex)
v3: minor cleanup (Alex)
v4: fix comment (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IRQ services to support DCN 3.1.4 interrupts.
v2: make to_dal_irq_source_dcn314 static (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register headers for the following IPs:
- DCN 3.1.4
- DPCS 3.1.4
v2:(squash) clean up (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When pinning a buffer, we should check to see if there are any
additional restrictions imposed by bo->preferred_domains. This will
prevent the BO from being moved to an invalid domain when pinning.
For example, this can happen if the user requests to create a BO in GTT
domain for display scanout. amdgpu_dm will allow pinning to either VRAM
or GTT domains, since DCN can scanout from either or. However, in
amdgpu_bo_pin_restricted(), pinning to VRAM is preferred if there is
adequate carveout. This can lead to pinning to VRAM despite the user
requesting GTT placement for the BO.
v2: Allow the kernel to override the domain, which can happen when
exporting a BO to a V4L camera (for example).
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Check the value of per_pixel_alpha to decide whether the Coverage pixel
blend mode is applicable or not.
Fixes: 76818cdd11 ("drm/amd/display: add Coverage blend mode for overlay plane")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
divide error: 0000 [#1] SMP PTI
CPU: 3 PID: 78925 Comm: tee Not tainted 5.15.50-1-lts #1
Hardware name: MSI MS-7A59/Z270 SLI PLUS (MS-7A59), BIOS 1.90 01/30/2018
RIP: 0010:smu_v11_0_set_fan_speed_rpm+0x11/0x110 [amdgpu]
Speed is user-configurable through a file.
I accidentally set it to zero, and the driver crashed.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Yefim Barashkin <mr.b34r@kolabnow.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Various DCE versions had trouble with 36 bpp lb depth, requiring fixes,
last time in commit 353ca0fa56 ("drm/amd/display: Fix 10bit 4K display
on CIK GPUs") for DCE-8. So far >= DCE-11.2 was considered ok, but now I
found out that on DCE-11.2 it causes dithering when there shouldn't be
any, so identity pixel passthrough with identity gamma LUTs doesn't work
when it should. This breaks various important neuroscience applications,
as reported to me by scientific users of Polaris cards under Ubuntu 22.04
with Linux 5.15, and confirmed by testing it myself on DCE-11.2.
Lets only use depth 36 for DCN engines, where my testing showed that it
is both necessary for high color precision output, e.g., RGBA16 fb's,
and not harmful, as far as more than one year in real-world use showed.
DCE engines seem to work fine for high precision output at 30 bpp, so
this ("famous last words") depth 30 should hopefully fix all known problems
without introducing new ones.
Successfully retested on DCE-11.2 Polaris and DCN-1.0 Raven Ridge on
top of Linux 5.19.0-rc2 + drm-next.
Fixes: 353ca0fa56 ("drm/amd/display: Fix 10bit 4K display on CIK GPUs")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org # 5.14.0
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
First MST sideband message returns AUX_RET_ERROR_HPD_DISCON
on certain intel platform. Aux transaction considered failure
if HPD unexpected pulled low. The actual aux transaction success
in such case, hence do not return error.
[how]
Not returning error when AUX_RET_ERROR_HPD_DISCON detected
on the first sideband message.
v2: squash in additional DMI entries
v3: squash in static fix
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The indentation is screwed up. I'm not sure quite how the logic
should flow. Someone more familiar with this code should
verify this.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the value of per_pixel_alpha to decide whether the Coverage pixel
blend mode is applicable or not.
Fixes: 76818cdd11 ("drm/amd/display: add Coverage blend mode for overlay plane")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
divide error: 0000 [#1] SMP PTI
CPU: 3 PID: 78925 Comm: tee Not tainted 5.15.50-1-lts #1
Hardware name: MSI MS-7A59/Z270 SLI PLUS (MS-7A59), BIOS 1.90 01/30/2018
RIP: 0010:smu_v11_0_set_fan_speed_rpm+0x11/0x110 [amdgpu]
Speed is user-configurable through a file.
I accidentally set it to zero, and the driver crashed.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Yefim Barashkin <mr.b34r@kolabnow.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Various DCE versions had trouble with 36 bpp lb depth, requiring fixes,
last time in commit 353ca0fa56 ("drm/amd/display: Fix 10bit 4K display
on CIK GPUs") for DCE-8. So far >= DCE-11.2 was considered ok, but now I
found out that on DCE-11.2 it causes dithering when there shouldn't be
any, so identity pixel passthrough with identity gamma LUTs doesn't work
when it should. This breaks various important neuroscience applications,
as reported to me by scientific users of Polaris cards under Ubuntu 22.04
with Linux 5.15, and confirmed by testing it myself on DCE-11.2.
Lets only use depth 36 for DCN engines, where my testing showed that it
is both necessary for high color precision output, e.g., RGBA16 fb's,
and not harmful, as far as more than one year in real-world use showed.
DCE engines seem to work fine for high precision output at 30 bpp, so
this ("famous last words") depth 30 should hopefully fix all known problems
without introducing new ones.
Successfully retested on DCE-11.2 Polaris and DCN-1.0 Raven Ridge on
top of Linux 5.19.0-rc2 + drm-next.
Fixes: 353ca0fa56 ("drm/amd/display: Fix 10bit 4K display on CIK GPUs")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org # 5.14.0
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fixes for MST, MPO, PSRSU, DP 2.0, Freesync and others
- Add register offsets of NBI and DCN.
- Improvement of ALPM
- Removing assert statement for Linux DM
- Re-implementing ARGB16161616 pixel format
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With single display odm 2:1 policy, when moving windowed MPO across
the display, we experience a momentary lag when we move between the
centre of the display and the right half of the display. This is
caused by the MPO pipe being reallocated when it crosses this
boundary
[How]
Handle two cases:
1. if the head pipe has a MPO pipe already allocated in the old
context, then use that pipe if it is available in the current
context
2. if the head pipe is on the left side, check the right side to
see if it has a MPO pipe already allocated. If so, don't use
that pipe if it is selected as the idle pipe in the current
context
Add new function pointer called .acquire_idle_pipe_for_head_pipe
that will pass in the head pipe and handle case 1
Add find_idle_secondary_pipe_check_mpo() to handle case 2
if we don't hit case 1.
In dc_add_plane_to_context(), start with head pipe and check
case 1 and 2 in call acquire_free_pipe_for_head().
If we are on the right side of the display, check case 1
again by passing in right side pipe as the new head in
call acquire_free_pipe_for_head().
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
