Pull ARM devicetree updates from Arnd Bergmann:
"Most of the changes fall into one of three categories: adding support
for additional devices on existing machines, cleaning up issues found
by the ongoing conversion to machine-readable bindings, and addressing
minor mistakes in the existing DT data.
Across SoC vendors, Qualcomm and Freescale stick out as getting the
most updates, which corresponds to their dominance in the mobile phone
and embedded industrial markets, respectively.
There are 636 non-merge changeset in this branch, which is a little
lower than most times, but more importantly we only add 36 machine
files, which is about half of what we had the past few releases.
Eight new SoCs are added, but all of them are variations of already
supported SoC families, and most of them come with one reference board
design from the SoC vendor:
- Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the
MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55
cores.
- TI AM62A is another member of the K3 family with Cortex-A53 cores,
this one is targetted at Video/Vision processing for industrial and
automotive applications.
- NXP i.MX8DXL is another chip for this market in the ever-growing
i.MX8 family, this one again with two Cortex-A35 cores.
- Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are
minor updates of R8A77951 and R8A77980, respectively.
- Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the
IPQ8064 chip, with minimally different features.
The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close
this time, but in the end did not make the cut.
The new machines based on existing SoC support are fairly uneventful:
- Sony Xperia 1 IV is a fairly recent phone based on Qualcomm
Snapdragon 8 Gen 1.
- Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and
Grand Max. These are added for both 32-bit and 64-bit kernels, as
they originally shipped running 32-bit code.
- Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere Mt.
Mitchell
- Three new machines based on Rockchips RK3399 and RK3566: Anberic
RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab
- Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S,
i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board
- Two development boards in the Microchip AT91 family: SAMA5D3-EDS
and lan966x-pcb8290.
- Minor variants of existing boards using Amlogic, Broadcom, Marvell,
Rockchips, Freescale Layerscape and Socionext Uniphier SoCs"
* tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (617 commits)
Revert "ARM: dts: BCM5301X: Add basic PCI controller properties"
ARM: dts: s5pv210: correct double "pins" in pinmux node
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2
arm64: dts: uniphier: Add L2 cache node
arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node
arm64: dts: uniphier: Fix opp-table node name for LD20
arm64: dts: uniphier: Add USB-device support for PXs3 reference board
arm64: dts: uniphier: Add ahci controller nodes for PXs3
arm64: dts: uniphier: Use GIC interrupt definitions
arm64: dts: uniphier: Rename gpio-hog nodes
arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller
arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller
arm64: dts: uniphier: Rename pvtctl node to thermal-sensor
ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node
ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card
ARM: dts: uniphier: Add ahci controller nodes for PXs2
ARM: dts: uniphier: Add ahci controller nodes for Pro4
ARM: dts: uniphier: Use GIC interrupt definitions
ARM: dts: uniphier: Rename gpio-hog node
...
Adding the #address-cells/#size-cells properties without also
adding the other required properties for PCI nodes causes new
build warnings from dtc that now show up everywhere, rather than
just while verifying the yaml bindings:
arch/arm/boot/dts/bcm5301x.dtsi:240.21-246.5: Warning (pci_bridge): /axi@18000000/pcie@12000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm5301x.dtsi:248.21-254.5: Warning (pci_bridge): /axi@18000000/pcie@13000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm5301x.dtsi:256.21-262.5: Warning (pci_bridge): /axi@18000000/pcie@14000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Revert it for now.
Fixes: 61dc1e3850 ("ARM: dts: BCM5301X: Add basic PCI controller properties")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM and ARM64 changes for v6.1
Late cleanup and fixes for Samsung DTS:
1. Fix polarity of pins:
- enable GPIO of NFC chip in Exynos5433 TM2 boards,
- vbus GPIO of EHCI in Exynos4412 Origen board.
2. Correct name of pin configuration nodes - redundant "pins" in the
name (no functional impact).
* tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: correct double "pins" in pinmux node
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2
Link: https://lore.kernel.org/r/20221003073916.12588-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The generic platform driver pcie-designware-plat.c doesn't work for
UniPhier PCIe endpoint controller, because the controller has some
necessary initialization sequence for the controller-specific logic.
Currently the controller doesn't use "snps,dw-pcie-ep" compatible,
so this is no longer needed. Remove the compatible string from the
pcie-ep node.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-10-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to gpio-hog schema, should add the suffix "-hog" to the node
names including gpio-hog to fix the following warning.
uniphier-pro4-ref.dtb: gpio@55000000: 'xirq2' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
This applies to the devicetree for LD4, LD6b, Pro4 and sLD8 SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-5-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
We also need to patch relevant DTS files, as the original code relied on
the fact that of_get_named_gpio_flags() would fetch any data encoded in
GPIO flags, even if it does not reflect valid flags for a GPIO.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/YxeS1BK2OBH1P/kO@google.com
Added IPMB-13 channel for Debug Card communication which improves the
readability of the machine and makes it easier to debug the server and
it will display some pieces of information about the server like "system
info", "Critical sensors" and "critical sel".
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220926124313.GA8400@hcl-ThinkPad-T495
Signed-off-by: Joel Stanley <joel@jms.id.au>
Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes in the SoC tree:
- Two fixes for Arm integrator, dealing with a regression caused by
invalid DT properties combined with a change in dma address
translation, and missing device_type annotations on the PCI bus
- Fixes for drivers/reset/, addressing bugs in i.MX8MP, Sparx5 and
NPCM8XX platforms
- Bjorn Andersson's email address changes in the MAINTAINERS file
- Multiple minor fixes to Qualcomm dts files, and a change to the
remoteproc firmware filename that did not match the actual path in
the linux-firmware package
- Minor code fixes for the Allwinner/sunxi SRAM driver, and the
broadcom STB Bus Interface Unit driver
- A build fix for the sunplus sp7021 platform
- Two dts fixes for TI OMAP family SoCs, addressing an extraneous
usb4 device node and an incorrect DMA handle"
* tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: integrator: Fix DMA ranges
ARM: dts: integrator: Tag PCI host with device_type
ARM: sunplus: fix serial console kconfig and build problems
reset: npcm: fix iprst2 and iprst4 setting
arm64: dts: qcom: sm8350: fix UFS PHY serdes size
soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()
arm64: dts: qcom: sc8280xp-x13s: Update firmware location
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
soc: sunxi: sram: Fix probe function ordering issues
soc: sunxi: sram: Prevent the driver from being unbound
soc: sunxi: sram: Actually claim SRAM regions
ARM: dts: am5748: keep usb4_tm disabled
reset: microchip-sparx5: issue a reset on startup
reset: imx7: Fix the iMX8MP PCIe PHY PERST support
MAINTAINERS: Update Bjorn's email address
arm64: dts: qcom: sc7280: move USB wakeup-source property
arm64: dts: qcom: thinkpad-x13s: Fix firmware location
arm64: dts: qcom: sm8150: Fix fastrpc iommu values
ARM: dts: am33xx: Fix MMCHS0 dma properties
A recent change affecting the behaviour of phys_to_dma() to
actually require the device tree ranges to work unmasked a
bug in the Integrator DMA ranges.
The PL110 uses the CMA allocator to obtain coherent allocations
from a dedicated 1MB video memory, leading to the following
call chain:
drm_gem_cma_create()
dma_alloc_attrs()
dma_alloc_from_dev_coherent()
__dma_alloc_from_coherent()
dma_get_device_base()
phys_to_dma()
translate_phys_to_dma()
phys_to_dma() by way of translate_phys_to_dma() will nowadays not
provide 1:1 mappings unless the ranges are properly defined in
the device tree and reflected into the dev->dma_range_map.
There is a bug in the device trees because the DMA ranges are
incorrectly specified, and the patch uncovers this bug.
Solution:
- Fix the LB (logic bus) ranges to be 1-to-1 like they should
have always been.
- Provide a 1:1 dma-ranges attribute to the PL110.
- Mark the PL110 display controller as DMA coherent.
This makes the DMA ranges work right and makes the PL110
framebuffer work again.
Fixes: af6f23b88e ("ARM/dma-mapping: use the generic versions of dma_to_phys/phys_to_dma by default")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220926073311.1610568-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps
A series of changes for am335x baltos and netcom devices to update nand
transfer type and configure gpio-line-names.
* tag 'omap-for-6.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 2-port devices
ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 8-port devices
ARM: dts: am335x-netcan: add GPIO names for NetCAN Plus device
ARM: dts: am335x-baltos: add GPIO names for ir2110 device
ARM: dts: am335x-baltos: add GPIO names for ir3220 and ir5221 devices
ARM: dts: am335x-baltos: change nand-xfer-type
Link: https://lore.kernel.org/r/pull-1663587735-853102@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Device tree label property should contain label from the box/stick.
Labels for other ports are already specified in DT but wan is missing.
So add missing label for wan port.
Fixes: 26ca8b52d6 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Turris Omnia has GPIO51 exported on pin header U16, which works in S/PDIF
output mode. So define S/PDIF audio output card for this pin.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
S/PDIF function on Armada 38x uses only mpp51 pin. So add spdif-pins mpp
pins section for it. It is needed for boards without i2s.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This commit adds the necessary Device Tree information to enable
audio support on the Armada 385 DB platform. In details it:
* Instantiates the CS42L51 audio codec on the I2C0 bus
* Adds simple-card DT binding for audio on Armada 385 DB
* Adds description for both analog I2S and S/PDIF I/O
* Disabled by default
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Star_Automation <star@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Qualcomm ARM64 DTS updates for 6.1
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
* tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits)
arm64: dts: qcom: sc7280: Add required-opps for USB
arm64: dts: qcom: sm8450: fix UFS PHY serdes size
arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size
arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks
arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs
dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager
arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
arm64: dts: qcom: align SDHCI reg-names with DT schema
arm64: dts: qcom: sm8250: provide additional MSI interrupts
arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node
arm64: dts: qcom: Use WCD9335 DT bindings
arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO
arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO
...
Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM DTS updates for 6.1
This adds extends the IPQ8064 support with the two variants IPQ8062 and
IPQ8065. MSM8974 and APQ8084 gained RPM stats support.
The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS
ZenWatch 2 and LG G Watch R.
MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got
the TMA340 Touchscreen described.
A wide range of improvements are done throughout the DTS files to align
with bindings, fix issues and improve structure on things.
* tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits)
ARM: dts: qcom: apq8026-lg-lenok: Enable ADSP
ARM: dts: qcom: apq8026-asus-sparrow: Enable ADSP
ARM: dts: qcom: msm8226: Add ADSP node
ARM: dts: qcom: ipq8064: pad addresses to 8 digit
ARM: dts: qcom: ipq8064: reorganize node order and sort them
ARM: dts: qcom: align SDHCI clocks with DT schema
ARM: dts: qcom: align SDHCI reg-names with DT schema
ARM: dts: qcom: msm8960: add clocks to the MMCC device node
ARM: dts: qcom: apq8064: add clocks to the MMCC device node
ARM: dts: qcom: msm8960: add clocks to the GCC device node
ARM: dts: qcom: apq8064: add clocks to the GCC device node
ARM: dts: qcom: msm8960: add clocks to the LCC device node
ARM: dts: qcom: apq8064: add clocks to the LCC device node
ARM: dts: qcom: msm8226: switch TCSR mutex to MMIO
ARM: dts: qcom: apq8084: switch TCSR mutex to MMIO
ARM: dts: qcom: msm8660: fix node names for fixed clocks
ARM: dts: qcom: msm8660: add pxo/cxo clocks to the GCC node
ARM: dts: qcom: apq8060-dragonboard: Add TMA340 to APQ8060 DragonBoard
ARM: dts: qcom: msm8660: Add GSBI3 I2C bus
ARM: dts: qcom: msm8660: Add GSBI1 SPI bus
...
Link: https://lore.kernel.org/r/20220921222619.1338380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX device tree change for 6.1
- A series from Alexander Stein to add missing properties for i.MX6 SRAM.
- Drop 'interrupts' property when 'interrupts-extended' is present. This
fixes a dtbs_check warning with i.MX6 DT.
- Update device trees to use generic name 'dma-controller' for SDMA.
- A set of changes from Krzysztof Kozlowski to align SPI, LED and
gpio-keys node name with dtschema.
- A series of indentation and white-space cleanups from Marcel Ziswiler
to address various checkpatch warnings.
- Add DDR pinmux defines to VF610 DT header.
- A couple of changes from Peng Fan to update clock-names and add IPG
clock for i.MX7ULP LPI2C devices.
- Improve device tree structure for Kontron i.MX6UL/ULL based boards.
- A series of changes from Tim Harvey to add CAN regulator for Gateworks
i.MX6QDL boards.
- Various small and random board specific updates.
* tag 'imx-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits)
ARM: dts: imx6qdl-gw54xx: add CAN regulator
ARM: dts: imx6qdl-gw53xx: add CAN regulator
ARM: dts: imx6qdl-gw52xx: add CAN regulator
ARM: dts: imx: update sdma node name format
ARM: dts: imx6: skov: migrate to resistive-adc-touch
ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines
ARM: dts: imx6sl: use tabs for code indent
ARM: dts: imx6sx: add missing properties for sram
ARM: dts: imx6sll: add missing properties for sram
ARM: dts: imx6sl: add missing properties for sram
ARM: dts: imx6qp: add missing properties for sram
ARM: dts: imx6dl: add missing properties for sram
ARM: dts: imx6q: add missing properties for sram
ARM: dts: imx7ulp: Add IPG clock for lpi2c
ARM: dts: imx7ulp: update the LPI2C clock-names
ARM: dts: vf610: ddr pinmux
ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file
ARM: dts: imx6ul-kontron: Add imx6ull-kontron-bl to Makefile
ARM: dts: imx6ul-kontron: Simplify devicetree structure
ARM: dts: vf610: align SPI node name with dtschema
...
Link: https://lore.kernel.org/r/20220918092806.2152700-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two fixes for omaps
A fix to remove usb4 from am5748 as it does not exist on the SoC, and
a fix for am335x mmc dma that wired direct and should not use the xbar.
Note that the am5748 fix depends on the recent deferred probe regression
fixes to boot. I ended up picking the merge commit to base it on as it
describes what got fixed quite nicely rather than a -rc tag.
* tag 'omap-for-6.0/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am5748: keep usb4_tm disabled
ARM: dts: am33xx: Fix MMCHS0 dma properties
Link: https://lore.kernel.org/r/pull-1663140667-273537@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 DT for v6.1 #2
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
* tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes
ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1
ARM: dts: at91: sama7g5: Swap rx and tx for spi11
dts: arm: at91: Add SAMA5D3-EDS Board
dt-bindings: arm: at91: Add info on SAMA5D3-EDS
ARM: dts: lan966x: disable aes
Link: https://lore.kernel.org/r/20220916105407.1287452-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The GW54xx has a transceiver with a STBY pin connected to an IMX6 GPIO.
Configure this as a regulator to drive it low when CAN is in use.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
