The vfio_pin/unpin_pages() so far accepted arrays of PFNs of user IOVA.
Among all three callers, there was only one caller possibly passing in
a non-contiguous PFN list, which is now ensured to have contiguous PFN
inputs too.
Pass in the starting address with "iova" alone to simplify things, so
callers no longer need to maintain a PFN list or to pin/unpin one page
at a time. This also allows VFIO to use more efficient implementations
of pin/unpin_pages.
For now, also update vfio_iommu_type1 to fit this new parameter too,
while keeping its input intact (being user_iova) since we don't want
to spend too much effort swapping its parameters and local variables
at that level.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-6-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There's only one caller that checks its return value with a WARN_ON_ONCE,
while all other callers don't check the return value at all. Above that,
an undo function should not fail. So, simplify the API to return void by
embedding similar WARN_ONs.
Also for users to pinpoint which condition fails, separate WARN_ON lines,
yet remove the "driver->ops->unpin_pages" check, since it's unreasonable
for callers to unpin on something totally random that wasn't even pinned.
And remove NULL pointer checks for they would trigger oops vs. warnings.
Note that npage is already validated in the vfio core, thus drop the same
check in the type1 code.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-2-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
CXL 2.0 allows for dynamic provisioning of new memory regions (system
physical address resources like "System RAM" and "Persistent Memory").
Whereas DDR and PMEM resources are conveyed statically at boot, CXL
allows for assembling and instantiating new regions from the available
capacity of CXL memory expanders in the system.
Sysfs with an "echo $region_name > $create_region_attribute" interface
is chosen as the mechanism to initiate the provisioning process. This
was chosen over ioctl() and netlink() to keep the configuration
interface entirely in a pseudo-fs interface, and it was chosen over
configfs since, aside from this one creation event, the interface is
read-mostly. I.e. configfs supports cases where an object is designed to
be provisioned each boot, like an iSCSI storage target, and CXL region
creation is mostly for PMEM regions which are created usually once
per-lifetime of a server instance. This is an improvement over nvdimm
that pre-created "seed" devices that tended to confuse users looking to
determine which devices are active and which are idle.
Recall that the major change that CXL brings over previous persistent
memory architectures is the ability to dynamically define new regions.
Compare that to drivers like 'nfit' where the region configuration is
statically defined by platform firmware.
Regions are created as a child of a root decoder that encompasses an
address space with constraints. When created through sysfs, the root
decoder is explicit. When created from an LSA's region structure a root
decoder will possibly need to be inferred by the driver.
Upon region creation through sysfs, a vacant region is created with a
unique name. Regions have a number of attributes that must be configured
before the region can be bound to the driver where HDM decoder program
is completed.
An example of creating a new region:
- Allocate a new region name:
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
- Create a new region by name:
while
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
! echo $region > /sys/bus/cxl/devices/decoder0.0/create_pmem_region
do true; done
- Region now exists in sysfs:
stat -t /sys/bus/cxl/devices/decoder0.0/$region
- Delete the region, and name:
echo $region > /sys/bus/cxl/devices/decoder0.0/delete_region
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784333909.1758207.794374602146306032.stgit@dwillia2-xfh.jf.intel.com
[djbw: simplify locking, reword changelog]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The last user, which in fact was a dead code, has gone a year ago,
previous one 3 years ago. On top of that we want to drop away the
legacy GPIO APIs in the kernel, so take a chance to get rid of
unused devm_gpio_free() and accompanying stuff.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The newly added media_entity_remote_source_pad_unique() helper function
handles use cases where the entity has a link enabled uniqueness
constraint covering all pads. There are use cases where the constraint
covers a specific pad only. Add a new media_pad_remote_pad_unique()
function to handle this. It operates as
media_entity_remote_source_pad_unique(), but on a given pad instead of
on the entity.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media_entity_remote_pad_first() helper function returns the first
remote pad it finds connected to a given pad. Beside being possibly
non-deterministic (as it stops at the first enabled link), the fact that
it returns the first match makes it unsuitable for drivers that need to
guarantee that a single link is enabled, for instance when an entity can
process data from one of multiple sources at a time.
For those use cases, add a new helper function,
media_entity_remote_pad_unique(), that operates on an entity and returns
a remote pad, with a guarantee that only one link is enabled. To ease
its use in drivers, also add an inline wrapper that locates source pads
specifically. A wrapper that locates sink pads can easily be added when
needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Drivers typically extend the v4l2_async_subdev structure by embedding it
in a driver-specific structure, to store per-subdev custom data. The
v4l2_async_subdev instances are freed by the v4l2-async framework, which
makes this mechanism cumbersome to use safely when custom data needs
special treatment to be destroyed (such as freeing additional memory, or
releasing references to kernel objects).
To ease this, add a .destroy() operation to the
v4l2_async_notifier_operations structure. The operation is called right
before the v4l2_async_subdev is freed, giving drivers a chance to
destroy data if needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Xu writes:
Here is the second set of FPGA changes for 5.20-rc1
FPGA Manager core:
- Ivan's change to support image offset and data size setting for
reprograming. A parse_header() callback is introduced for drivers to
specify these info.
- Colin's immediate spelling fix for Ivan's patch.
Microchip:
- Ivan's change to add Microchip MPF FPGA manager driver. And MAINTAINERS
entry added for the driver.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-late-for-5.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: fpga-mgr: Fix spelling mistake "bitsream" -> "bitstream"
MAINTAINERS: add Microchip PolarFire FPGA drivers entry
dt-bindings: fpga: add binding doc for microchip-spi fpga mgr
fpga: microchip-spi: add Microchip MPF FPGA manager
docs: fpga: mgr: document parse_header() callback
fpga: fpga-mgr: support bitstream offset in image buffer
All extern functions of drivers/gpio/gpiolib.c are already
inside the Kernel documentation, as driver-api/gpio/index.rst
already includes it.
Placing a kernel-doc here will only cause mess, as the same symbol
will be placed on two parts of the document, causing breakages
in cross-references.
So, instead, add a cross-reference there.
This solves those Sphinx 3.1+ warnings:
.../Documentation/driver-api/hte/tegra194-hte:28: ./drivers/gpio/gpiolib.c:2464: WARNING: Duplicate C declaration, also defined at driver-api/gpio/index:2464.
.../Documentation/driver-api/hte/tegra194-hte:28: ./drivers/gpio/gpiolib.c:2493: WARNING: Duplicate C declaration, also defined at driver-api/gpio/index:2493.
.../Documentation/driver-api/hte/tegra194-hte.rst:2464: WARNING: Duplicate C declaration, also defined at driver-api/gpio/index:2464.
.../Documentation/driver-api/hte/tegra194-hte.rst:2464: WARNING: Duplicate C declaration, also defined at driver-api/gpio/index:2464.
.../Documentation/driver-api/hte/tegra194-hte.rst:2464: WARNING: Duplicate C declaration, also defined at driver-api/gpio/index:2464.
.../Documentation/driver-api/hte/tegra194-hte.rst:2493: WARNING: Duplicate C declaration, also defined at driver-api/gpio/index:2493.
.../Documentation/driver-api/hte/tegra194-hte.rst:2493: WARNING: Duplicate C declaration, also defined at driver-api/gpio/index:2493.
.../Documentation/driver-api/hte/tegra194-hte.rst:2493: WARNING: Duplicate C declaration, also defined at driver-api/gpio/index:2493.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/de81b472f552bd651f140f0aa779a29652fffa62.1656759989.git.mchehab@kernel.org
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add support for RS-485 multipoint addressing using 9th bit [*]. The
addressing mode is configured through ->rs485_config().
ADDRB in termios indicates 9th bit addressing mode is enabled. In this
mode, 9th bit is used to indicate an address (byte) within the
communication line. ADDRB can only be enabled/disabled through
->rs485_config() that is also responsible for setting the destination and
receiver (filter) addresses.
Add traps to detect unwanted changes to struct serial_rs485 layout using
static_assert().
[*] Technically, RS485 is just an electronic spec and does not itself
specify the 9th bit addressing mode but 9th bit seems at least
"semi-standard" way to do addressing with RS485.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624204210.11112-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 31f6bd7fad ("serial: Store character timing information
to uart_port"), per frame timing information is available on uart_port.
Uart port's timeout can be derived from frame_time by multiplying with
fifosize.
Most callers of uart_poll_timeout are not made under port's lock. To be
on the safe side, make sure frame_time is only accessed once. As
fifo_size is effectively a constant, it shouldn't cause any issues.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220613113905.22962-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement DRM's aperture helpers under video/ for sharing with other
sub-systems. Remove DRM-isms from the interface. The helpers track
the ownership of framebuffer apertures and provide hand-over from
firmware, such as EFI and VESA, to native graphics drivers.
Other subsystems, such as fbdev and vfio, also have to maintain ownership
of framebuffer apertures. Moving DRM's aperture helpers to a more public
location allows all subsystems to interact with each other and share a
common implementation.
The aperture helpers are selected by the various firmware drivers within
DRM and fbdev, and the VGA text-console driver.
The original DRM interface is kept in place for use by DRM drivers.
v3:
* prefix all interfaces with aperture_ (Javier)
* rework and simplify documentation (Javier)
* rename struct dev_aperture to struct aperture_range
* rebase onto latest DRM
* update MAINTAINERS entry
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-3-tzimmermann@suse.de
This was removed before due to the complete lack of users, but
3218910fd5 ("dmaengine: Add core function and capability check for
DMA_MEMCPY_SG") and 29cf37fa6d ("dmaengine: Add consumer for the new
DMA_MEMCPY_SG API function.") added it back despite still not having
any users whatsoever.
Fixes: 3218910fd5 ("dmaengine: Add core function and capability check for DMA_MEMCPY_SG")
Fixes: 29cf37fa6d ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220606074733.622616-1-hch@lst.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This resolves the merge issue with:
drivers/staging/r8188eu/os_dep/ioctl_linux.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The filenames were changed a while ago, but board.rst, consumer.rst and
intro.rst still refer to the old names. Fix those references to match the
Actual names and avoid possible confusion.
Signed-off-by: Tom Schwindl <schwindl@posteo.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
When SSAM client devices have been (physically) hot-removed,
communication attempts with those devices may fail and time out. This
can even extend to event notifiers, due to which timeouts may occur
during device removal, slowing down that process.
Add a parameter to the notifier unregister function that allows skipping
communication with the EC to prevent this. Furthermore, add wrappers for
registering and unregistering notifiers belonging to SSAM client devices
that automatically check if the device has been marked as hot-removed
and communication should be avoided.
Note that non-SSAM client devices can generally not be hot-removed, so
also add a convenience wrapper for those, defaulting to allow
communication.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The VME subsystem graduated from staging into a top-level subsystem in
2012, with commit db3b9e990e ("Staging: VME: move VME drivers out of
staging") stating:
The VME device drivers have not moved out yet due to some API
questions they are still working through, that should happen soon,
hopefully.
However, this never happened: maintenance of drivers/vme effectively
stopped in 2017, with all subsequent changes being treewide cleanups.
No hardware driver remains in staging, only the limited user-level
access, and I just removed one of the two bridge drivers and the only
remaining board.
drivers/staging/vme/devices/ was recently moved to
drivers/staging/vme_user/, but as the vme_user driver is the only one
remaining for this subsystem, it is easier to just move the remaining
three source files into this directory rather than keeping the original
hierarchy.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220606084109.4108188-3-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license version 2 as
published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sanitize serial_rs485 struct before calling into rs485_setup. The
drivers provide supported_rs485 to help sanitization of the fields.
If neither of SER_RS485_RTS_ON_SEND or SER_RS485_RTS_AFTER_SEND
supported, don't pretend they can be set to sane settings but clear
them both instead. If only one of them is supported it may look
tempting to use the one driver supports to set the other, however, the
userspace does not have that information readily available so it
wouldn't be helpful.
While adjusting the documentation, remove also the claim that
TIOCGRS485 would call driver specific code. In reality, it does nothing
else than copies the stored serial_rs485 structure from uart_port to
userspace.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220606100433.13793-23-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hardware timestamp engine documentation is driver API material, and
really belongs in the driver-API book; move it there.
Cc: Thierry Reding <treding@nvidia.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.19-rc1.
Lots of tiny cleanups in here, the major stuff is:
- termbit cleanups and unification by Ilpo. A much needed change that
goes a long way to making things simpler for all of the different
arches
- tty documentation cleanups and movements to their own place in the
documentation tree
- old tty driver cleanups and fixes from Jiri to bring some existing
drivers into the modern world
- RS485 cleanups and unifications to make it easier for individual
drivers to support this mode instead of having to duplicate logic
in each driver
- Lots of 8250 driver updates and additions
- new device id additions
- n_gsm continued fixes and cleanups
- other minor serial driver updates and cleanups
All of these have been in linux-next for weeks with no reported issues"
* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
tty: Rework receive flow control char logic
pcmcia: synclink_cs: Don't allow CS5-6
serial: stm32-usart: Correct CSIZE, bits, and parity
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: sifive: Sanitize CSIZE and c_iflag
serial: sh-sci: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: rda-uart: Don't allow CS5-6
serial: digicolor-usart: Don't allow CS5-6
serial: uartlite: Fix BRKINT clearing
serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
serial: msm_serial: disable interrupts in __msm_console_write()
serial: meson: acquire port->lock in startup()
serial: 8250_dw: Use dev_err_probe()
serial: 8250_dw: Use devm_add_action_or_reset()
...
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
Pull pwm updates from Thierry Reding:
"Quite a large number of conversions this time around, courtesy of Uwe
who has been working tirelessly on these. No drivers of the legacy API
are left at this point, so as a next step the old API can be removed.
Support is added for a few new devices such as the Xilinx AXI timer-
based PWMs and the PWM IP found on Sunplus SoCs.
Other than that, there's a number of fixes, cleanups and optimizations"
* tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (43 commits)
pwm: pwm-cros-ec: Add channel type support
dt-bindings: google,cros-ec-pwm: Add the new -type compatible
dt-bindings: Add mfd/cros_ec definitions
pwm: Document that the pinstate of a disabled PWM isn't reliable
pwm: twl-led: Implement .apply() callback
pwm: lpc18xx: Implement .apply() callback
pwm: mediatek: Implement .apply() callback
pwm: lpc32xx: Implement .apply() callback
pwm: tegra: Implement .apply() callback
pwm: stmpe: Implement .apply() callback
pwm: sti: Implement .apply() callback
pwm: pwm-mediatek: Add support for MediaTek Helio X10 MT6795
dt-bindings: pwm: pwm-mediatek: Add documentation for MT6795 SoC
pwm: tegra: Optimize period calculation
pwm: renesas-tpu: Improve precision of period and duty_cycle calculation
pwm: renesas-tpu: Improve maths to compute register settings
pwm: renesas-tpu: Rename variables to match the usual naming
pwm: renesas-tpu: Implement .apply() callback
pwm: renesas-tpu: Make use of devm functions
pwm: renesas-tpu: Make use of dev_err_probe()
...
Pull dmaengine updates from Vinod Koul:
"Nothing special, this includes a couple of new device support and new
driver support and bunch of driver updates.
New support:
- Tegra gpcdma driver support
- Qualcomm SM8350, Sm8450 and SC7280 device support
- Renesas RZN1 dma and platform support
Updates:
- stm32 device pause/resume support and updates
- DMA memset ops Documentation and usage clarification
- deprecate '#dma-channels' & '#dma-requests' bindings
- driver updates for stm32, ptdma idsx etc"
* tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits)
dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled
dmaengine: sun6i: Add support for the D1 variant
dmaengine: sun6i: Add support for 34-bit physical addresses
dmaengine: sun6i: Do not use virt_to_phys
dt-bindings: dma: sun50i-a64: Add compatible for D1
dmaengine: tegra: Remove unused switch case
dmaengine: tegra: Fix uninitialized variable usage
dmaengine: stm32-dma: add device_pause/device_resume support
dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction
dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done()
dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg
dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor
dmaengine: qcom: gpi: Add support for sc7280
dt-bindings: dma: pl330: Add power-domains
dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it
dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()
dmaengine: stm32-mdma: remove GISR1 register
dmaengine: ti: deprecate '#dma-channels'
dmaengine: mmp: deprecate '#dma-channels'
dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests'
...
Pull pin control updates from Linus Walleij:
"Pretty big this time. Mostly due to (nice) Renesas refactorings.
Core changes:
- New helpers from Andy such as for_each_gpiochip_node() affecting
both GPIO and pin control, improving a bunch of drivers in the
process.
- Pulled in Marc Zyngiers work to make IRQ chips immutable, and
started to apply fixups on top.
New drivers:
- New driver for Marvell MVEBU 98DX2530.
- New driver for Mediatek MT8195.
- Support Qualcomm PMX65 and PM6125.
- New driver for Qualcomm SC7280 LPASS pin control.
- New driver for Rockchip RK3588.
- New driver for NXP Freescale i.MXRT1170.
- New driver for Mediatek MT6795 Helio X10.
Improvements:
- Several Aspeed G6 cleanups and non-critical fixes.
- Thorought refactoring of some of the ever improving Renesas
drivers.
- Clean up Mediatek MT8192 bindings a bit.
- PWM output and clock monitoring in the Ocelot LAN966x driver.
- Thorough refactoring and cleanup of the Ralink drivers such as
RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into
proper sub-drivers"
* tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (161 commits)
pinctrl: apple: Use a raw spinlock for the regmap
pinctrl: berlin: bg4ct: Use devm_platform_*ioremap_resource() APIs
pinctrl: intel: Fix kernel doc format, i.e. add return sections
dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent'
pinctrl: starfive: Make the irqchip immutable
pinctrl: mediatek: Add pinctrl driver for MT6795 Helio X10
dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings
pinctrl: freescale: Add i.MXRT1170 pinctrl driver support
dt-bindings: pinctrl: add i.MXRT1170 pinctrl Documentation
dt-bindings: pinctrl: rockchip: increase max amount of device functions
dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges'
dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable'
dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names
dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config
dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU
pinctrl: qcom: spmi-gpio: Add pm6125 compatible
dt-bindings: pinctrl: qcom-pmic-gpio: Add pm6125 compatible
pinctrl: intel: Drop unused irqchip member in struct intel_pinctrl
pinctrl: intel: make irq_chip immutable
pinctrl: cherryview: Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
...
Pull drm updates from Dave Airlie:
"Intel have enabled DG2 on certain SKUs for laptops, AMD has started
some new GPU support, msm has user allocated VA controls
dma-buf:
- add dma_resv_replace_fences
- add dma_resv_get_singleton
- make dma_excl_fence private
core:
- EDID parser refactorings
- switch drivers to drm_mode_copy/duplicate
- DRM managed mutex initialization
display-helper:
- put HDMI, SCDC, HDCP, DSC and DP into new module
gem:
- rework fence handling
ttm:
- rework bulk move handling
- add common debugfs for resource managers
- convert to kvcalloc
format helpers:
- support monochrome formats
- RGB888, RGB565 to XRGB8888 conversions
fbdev:
- cfb/sys_imageblit fixes
- pagelist corruption fix
- create offb platform device
- deferred io improvements
sysfb:
- Kconfig rework
- support for VESA mode selection
bridge:
- conversions to devm_drm_of_get_bridge
- conversions to panel_bridge
- analogix_dp - autosuspend support
- it66121 - audio support
- tc358767 - DSI to DPI support
- icn6211 - PLL/I2C fixes, DT property
- adv7611 - enable DRM_BRIDGE_OP_HPD
- anx7625 - fill ELD if no monitor
- dw_hdmi - add audio support
- lontium LT9211 support, i.MXMP LDB
- it6505: Kconfig fix, DPCD set power fix
- adv7511 - CEC support for ADV7535
panel:
- ltk035c5444t, B133UAN01, NV3052C panel support
- DataImage FG040346DSSWBG04 support
- st7735r - DT bindings fix
- ssd130x - fixes
i915:
- DG2 laptop PCI-IDs ("motherboard down")
- Initial RPL-P PCI IDs
- compute engine ABI
- DG2 Tile4 support
- DG2 CCS clear color compression support
- DG2 render/media compression formats support
- ATS-M platform info
- RPL-S PCI IDs added
- Bump ADL-P DMC version to v2.16
- Support static DRRS
- Support multiple eDP/LVDS native mode refresh rates
- DP HDR support for HSW+
- Lots of display refactoring + fixes
- GuC hwconfig support and query
- sysfs support for multi-tile
- fdinfo per-client gpu utilisation
- add geometry subslices query
- fix prime mmap with LMEM
- fix vm open count and remove vma refcounts
- contiguous allocation fixes
- steered register write support
- small PCI BAR enablement
- GuC error capture support
- sunset igpu legacy mmap support for newer devices
- GuC version 70.1.1 support
amdgpu:
- Initial SoC21 support
- SMU 13.x enablement
- SMU 13.0.4 support
- ttm_eu cleanups
- USB-C, GPUVM updates
- TMZ fixes for RV
- RAS support for VCN
- PM sysfs code cleanup
- DC FP rework
- extend CG/PG flags to 64-bit
- SI dpm lockdep fix
- runtime PM fixes
amdkfd:
- RAS/SVM fixes
- TLB flush fixes
- CRIU GWS support
- ignore bogus MEC signals more efficiently
msm:
- Fourcc modifier for tiled but not compressed layouts
- Support for userspace allocated IOVA (GPU virtual address)
- DPU: DSC (Display Stream Compression) support
- DP: eDP support
- DP: conversion to use drm_bridge and drm_bridge_connector
- Merge DPU1 and MDP5 MDSS driver
- DPU: writeback support
nouveau:
- make some structures static
- make some variables static
- switch to drm_gem_plane_helper_prepare_fb
radeon:
- misc fixes/cleanups
mxsfb:
- rework crtc mode setting
- LCDIF CRC support
etnaviv:
- fencing improvements
- fix address space collisions
- cleanup MMU reference handling
gma500:
- GEM/GTT improvements
- connector handling fixes
komeda:
- switch to plane reset helper
mediatek:
- MIPI DSI improvements
omapdrm:
- GEM improvements
qxl:
- aarch64 support
vc4:
- add a CL submission tracepoint
- HDMI YUV support
- HDMI/clock improvements
- drop is_hdmi caching
virtio:
- remove restriction of non-zero blob types
vmwgfx:
- support for cursormob and cursorbypass 4
- fence improvements
tidss:
- reset DISPC on startup
solomon:
- SPI support
- DT improvements
sun4i:
- allwinner D1 support
- drop is_hdmi caching
imx:
- use swap() instead of open-coding
- use devm_platform_ioremap_resource
- remove redunant initializations
ast:
- Displayport support
rockchip:
- Refactor IOMMU initialisation
- make some structures static
- replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
- support swapped YUV formats,
- clock improvements
- rk3568 support
- VOP2 support
mediatek:
- MT8186 support
tegra:
- debugabillity improvements"
* tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits)
drm/i915/dsi: fix VBT send packet port selection for ICL+
drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
drm/i915/reg: fix undefined behavior due to shift overflowing the constant
drm/i915/gt: Fix use of static in macro mismatch
drm/i915/audio: fix audio code enable/disable pipe logging
drm/i915: Fix CFI violation with show_dynamic_id()
drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
drm/i915/gt: Fix build error without CONFIG_PM
drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations
drm/msm: don't free the IRQ if it was not requested
drm/msm/dpu: limit writeback modes according to max_linewidth
drm/amd: Don't reset dGPUs if the system is going to s2idle
drm/amdgpu: Unmap legacy queue when MES is enabled
drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
drm/msm: Fix fb plane offset calculation
drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
drm/msm/dsi: don't powerup at modeset time for parade-ps8640
drm/rockchip: Change register space names in vop2
dt-bindings: display: rockchip: make reg-names mandatory for VOP2
...
Pull documentation updates from Jonathan Corbet:
"It was a moderately busy cycle for documentation; highlights include:
- After a long period of inactivity, the Japanese translations are
seeing some much-needed maintenance and updating.
- Reworked IOMMU documentation
- Some new documentation for static-analysis tools
- A new overall structure for the memory-management documentation.
This is an LSFMM outcome that, it is hoped, will help encourage
developers to fill in the many gaps. Optimism is eternal...but
hopefully it will work.
- More Chinese translations.
Plus the usual typo fixes, updates, etc"
* tag 'docs-5.19' of git://git.lwn.net/linux: (70 commits)
docs: pdfdocs: Add space for chapter counts >= 100 in TOC
docs/zh_CN: Add dev-tools/gdb-kernel-debugging.rst Chinese translation
input: Docs: correct ntrig.rst typo
input: Docs: correct atarikbd.rst typos
MAINTAINERS: Become the docs/zh_CN maintainer
docs/zh_CN: fix devicetree usage-model translation
mm,doc: Add new documentation structure
Documentation: drop more IDE boot options and ide-cd.rst
Documentation/process: use scripts/get_maintainer.pl on patches
MAINTAINERS: Add entry for DOCUMENTATION/JAPANESE
docs/trans/ja_JP/howto: Don't mention specific kernel versions
docs/ja_JP/SubmittingPatches: Request summaries for commit references
docs/ja_JP/SubmittingPatches: Add Suggested-by as a standard signature
docs/ja_JP/SubmittingPatches: Randy has moved
docs/ja_JP/SubmittingPatches: Suggest the use of scripts/get_maintainer.pl
docs/ja_JP/SubmittingPatches: Update GregKH links
Documentation/sysctl: document max_rcu_stall_to_panic
Documentation: add missing angle bracket in cgroup-v2 doc
Documentation: dev-tools: use literal block instead of code-block
docs/zh_CN: add vm numa translation
...
Pull media updates from Mauro Carvalho Chehab:
- dvb-usb drivers entries got reworked to avoid usage of magic numbers
to refer to data position inside tables
- vcodec driver has gained support for MT8186 and for vp8 and vp9
stateless codecs
- hantro has gained support for Hantro G1 on RK366x
- Added more h264 levels on coda960
- ccs gained support for MIPI CSI-2 28 bits per pixel raw data type
- venus driver gained support for Qualcomm custom compressed pixel
formats
- lots of driver fixes and updates
* tag 'media/v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
media: hantro: Enable HOLD_CAPTURE_BUF for H.264
media: hantro: Add H.264 field decoding support
media: hantro: h264: Make dpb entry management more robust
media: hantro: Stop using H.264 parameter pic_num
media: rkvdec: Enable capture buffer holding for H264
media: rkvdec-h264: Add field decoding support
media: rkvdec: Ensure decoded resolution fit coded resolution
media: rkvdec: h264: Fix reference frame_num wrap for second field
media: rkvdec: h264: Validate and use pic width and height in mbs
media: rkvdec: Move H264 SPS validation in rkvdec-h264
media: rkvdec: h264: Fix bit depth wrap in pps packet
media: rkvdec: h264: Fix dpb_valid implementation
media: rkvdec: Stop overclocking the decoder
media: v4l2: Reorder field reflist
media: h264: Sort p/b reflist using frame_num
media: v4l2: Trace calculated p/b0/b1 initial reflist
media: h264: Store all fields into the unordered list
media: h264: Store current picture fields
media: h264: Increase reference lists size to 32
media: h264: Use v4l2_h264_reference for reflist
...
Pull interrupt handling updates from Thomas Gleixner:
"Core code:
- Make the managed interrupts more robust by shutting them down in
the core code when the assigned affinity mask does not contain
online CPUs.
- Make the irq simulator chip work on RT
- A small set of cpumask and power manageent cleanups
Drivers:
- A set of changes which mark GPIO interrupt chips immutable to
prevent the GPIO subsystem from modifying it under the hood. This
provides the necessary infrastructure and converts a set of GPIO
and pinctrl drivers over.
- A set of changes to make the pseudo-NMI handling for GICv3 more
robust: a missing barrier and consistent handling of the priority
mask.
- Another set of GICv3 improvements and fixes, but nothing
outstanding
- The usual set of improvements and cleanups all over the place
- No new irqchip drivers and not even a new device tree binding!
100+ interrupt chips are truly enough"
* tag 'irq-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
irqchip: Add Kconfig symbols for sunxi drivers
irqchip/gic-v3: Fix priority mask handling
irqchip/gic-v3: Refactor ISB + EOIR at ack time
irqchip/gic-v3: Ensure pseudo-NMIs have an ISB between ack and handling
genirq/irq_sim: Make the irq_work always run in hard irq context
irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x
irqchip/gic: Improved warning about incorrect type
irqchip/csky: Return true/false (not 1/0) from bool functions
irqchip/imx-irqsteer: Add runtime PM support
irqchip/imx-irqsteer: Constify irq_chip struct
irqchip/armada-370-xp: Enable MSI affinity configuration
irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value
irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value
irqchip/sun6i-r: Use NULL for chip_data
irqchip/xtensa-mx: Fix initial IRQ affinity in non-SMP setup
irqchip/exiu: Fix acknowledgment of edge triggered interrupts
irqchip/gic-v3: Claim iomem resources
dt-bindings: interrupt-controller: arm,gic-v3: Make the v2 compat requirements explicit
irqchip/gic-v3: Relax polling of GIC{R,D}_CTLR.RWP
irqchip/gic-v3: Detect LPI invalidation MMIO registers
...
intel-pinctrl for v5.19-2
* Fix immutable IRQ chip examples in the GPIO documentation
* Make use of immutable IRQ chip in Intel pin control drivers
* Add module alias for Intel Apollo Lake
The following is an automated git shortlog grouped by driver:
baytrail:
- make irq_chip immutable
broxton:
- Add module alias for Intel Apollo Lake
cherryview:
- Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
- make irq_chip immutable
Documentation:
- gpio: Advertise irqd_to_hwirq() helper in the examples
- gpio: Fix IRQ mask and unmask examples
intel:
- Fix kernel doc format, i.e. add return sections
- Drop unused irqchip member in struct intel_pinctrl
- make irq_chip immutable
lynxpoint:
- make irq_chip immutable
Some (most?) drivers emit the inactive state when the PWM is disabled.
However there are exceptions, so document that a consumer better doesn't
depend on this behaviour.
Some known exceptions:
- imx27 emits 0 independent of the configured polarity
- mxs just drives the output to the last emitted state.
- iqs620a makes the output tristated on disable, so an external
pull-down would be required.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Document that drivers must first initialise a media device before
registering it, and clean up once the media device is unregistered.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Instead of direct dereferencing the IRQ data in order to get HW IRQ number
use the irqd_to_hwirq() helper.
Fixes: 5644b66a9c ("Documentation: Update the recommended pattern for GPIO irqchips")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
After switching to immutable IRQ chips for GPIO drivers the examples become
uncompilable due to wrong IRQ API, i.e. irq_desc_get_handler_data() in use.
Replace it with proper irq_data_get_irq_chip_data() call where it applies.
Fixes: 5644b66a9c ("Documentation: Update the recommended pattern for GPIO irqchips")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
