Pull media fixes from Mauro Carvalho Chehab:
"A bunch of patches addressing issues in the vivid driver and adding
new checks in V4L2 to validate the input parameters from some ioctls"
* tag 'media/v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vivid.rst: loop_video is set on the capture devnode
media: vivid: set num_in/outputs to 0 if not supported
media: vivid: drop GFP_DMA32
media: vivid: fix control handler mutex deadlock
media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'
media: v4l2-dv-timings: add sanity checks for blanking values
media: vivid: dev->bitmap_cap wasn't freed in all cases
media: vivid: s_fbuf: add more sanity checks
The example on how to use and test Capture Overlay specified
the wrong video device node. Back in 2015 the loop_video control
moved from the output device to the capture device, but this
example code is still referring to the output video device.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
The net-memcg fix stands out, the rest is very run-off-the-mill. Maybe
I'm biased.
Current release - regressions:
- eth: fman: re-expose location of the MAC address to userspace,
apparently some udev scripts depended on the exact value
Current release - new code bugs:
- bpf:
- wait for busy refill_work when destroying bpf memory allocator
- allow bpf_user_ringbuf_drain() callbacks to return 1
- fix dispatcher patchable function entry to 5 bytes nop
Previous releases - regressions:
- net-memcg: avoid stalls when under memory pressure
- tcp: fix indefinite deferral of RTO with SACK reneging
- tipc: fix a null-ptr-deref in tipc_topsrv_accept
- eth: macb: specify PHY PM management done by MAC
- tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
Previous releases - always broken:
- eth: amd-xgbe: SFP fixes and compatibility improvements
Misc:
- docs: netdev: offer performance feedback to contributors"
* tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net-memcg: avoid stalls when under memory pressure
tcp: fix indefinite deferral of RTO with SACK reneging
tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY
net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
docs: netdev: offer performance feedback to contributors
kcm: annotate data-races around kcm->rx_wait
kcm: annotate data-races around kcm->rx_psock
net: fman: Use physical address for userspace interfaces
net/mlx5e: Cleanup MACsec uninitialization routine
atlantic: fix deadlock at aq_nic_stop
nfp: only clean `sp_indiff` when application firmware is unloaded
amd-xgbe: add the bit rate quirk for Molex cables
amd-xgbe: fix the SFP compliance codes check for DAC cables
amd-xgbe: enable PLL_CTL for fixed PHY modes only
amd-xgbe: use enums for mailbox cmd and sub_cmds
amd-xgbe: Yellow carp devices do not need rrc
bpf: Use __llist_del_all() whenever possbile during memory draining
bpf: Wait for busy refill_work when destroying bpf memory allocator
MAINTAINERS: add keyword match on PTP
...
Pull pin control fixes from Linus Walleij:
- Fix typos in UART1 and MMC in the Ingenic driver
- A really well researched glitch bug fix to the Qualcomm driver that
was tracked down and fixed by Dough Anderson from Chromium. Hats off
for this one!
- Revert two patches on the Xilinx ZynqMP driver: this needs a proper
solution making use of firmware version information to adapt to
different firmware releases
- Fix interrupt triggers in the Ocelot driver
* tag 'pinctrl-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: Fix incorrect trigger of the interrupt.
Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"
Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and bias-high-impedance"
pinctrl: qcom: Avoid glitching lines when we first mux to output
pinctrl: Ingenic: JZ4755 bug fixes
Some of us gotten used to producing large quantities of peer feedback
at work, every 3 or 6 months. Extending the same courtesy to community
members seems like a logical step. It may be hard for some folks to
get validation of how important their work is internally, especially
at smaller companies which don't employ many kernel experts.
The concept of "peer feedback" may be a hyperscaler / silicon valley
thing so YMMV. Hopefully we can build more context as we go.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull hwmon fixes from Guenter Roeck:
- corsair-psu: Fix typo in USB id description, and add USB ID for new
PSU
- pwm-fan: Fix fan power handling when disabling fan control
* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
hwmon: (corsair-psu) fix typo in USB id description
Pull missed media updates from Mauro Carvalho Chehab:
"It seems I screwed-up my previous pull request: it ends up that only
half of the media patches that were in linux-next got merged in -rc1.
The script which creates the signed tags silently failed due to
5.19->6.0 so it ended generating a tag with incomplete stuff.
So here are the missing parts:
- a DVB core security fix
- lots of fixes and cleanups for atomisp staging driver
- old drivers that are VB1 are being moved to staging to be
deprecated
- several driver updates - mostly for embedded systems, but there are
also some things addressing issues with some PC webcams, in the UVC
video driver"
* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
media: sun6i-csi: Move csi buffer definition to main header file
media: sun6i-csi: Introduce and use video helper functions
media: sun6i-csi: Add media ops with link notify callback
media: sun6i-csi: Remove controls handler from the driver
media: sun6i-csi: Register the media device after creation
media: sun6i-csi: Pass and store csi device directly in video code
media: sun6i-csi: Tidy up video code
media: sun6i-csi: Tidy up v4l2 code
media: sun6i-csi: Tidy up Kconfig
media: sun6i-csi: Use runtime pm for clocks and reset
media: sun6i-csi: Define and use variant to get module clock rate
media: sun6i-csi: Always set exclusive module clock rate
media: sun6i-csi: Tidy up platform code
media: sun6i-csi: Refactor main driver data structures
media: sun6i-csi: Define and use driver name and (reworked) description
media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
...
Pull ACPI fixes from Rafael Wysocki:
"These fix issues introduced during this merge window (ACPI/PCI, device
enumeration and documentation) and some other ones found recently.
Specifics:
- Add missing device reference counting to acpi_get_pci_dev() after
changing it recently (Rafael Wysocki)
- Fix resource list walk in acpi_dma_get_range() (Robin Murphy)
- Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
override warning message (Jiri Slaby)
- Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra)
- Fix multiple error records handling in one of the ACPI extlog
driver code paths (Tony Luck)
- Prune DSDT override documentation from index after dropping it
(Bagas Sanjaya)"
* tag 'acpi-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Fix DMA range assignment
ACPI: PCI: Fix device reference counting in acpi_get_pci_dev()
ACPI: resource: note more about IRQ override
ACPI: resource: do IRQ override on LENOVO IdeaPad
ACPI: extlog: Handle multiple records
ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
Documentation: ACPI: Prune DSDT override documentation from index
Merge assorted ACPI fixes for 6.1-rc2:
- Fix resource list walk in acpi_dma_get_range() (Robin Murphy).
- Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
override warning message (Jiri Slaby).
- Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra).
- Fix multiple error records handling in one of the ACPI extlog driver
code paths (Tony Luck).
- Prune DSDT override documentation from index after dropping it (Bagas
Sanjaya).
* acpi-scan:
ACPI: scan: Fix DMA range assignment
* acpi-resource:
ACPI: resource: note more about IRQ override
ACPI: resource: do IRQ override on LENOVO IdeaPad
* acpi-apei:
ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
* acpi-extlog:
ACPI: extlog: Handle multiple records
* acpi-docs:
Documentation: ACPI: Prune DSDT override documentation from index
Add documentation that was missing from commit 5721d4e5a9 ("dm
verity: Add optional "try_verify_in_tasklet" feature").
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
Pull LED updates from Pavel Machek:
"This is very quiet release for LEDs, pca963 got blinking support and
that's pretty much it"
* tag 'leds-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: pca963: fix misleading indentation
dt-bindings: leds: Document mmc trigger
leds: pca963x: fix blink with hw acceleration
Pull PSI updates from Ingo Molnar:
- Various performance optimizations, resulting in a 4%-9% speedup in
the mmtests/config-scheduler-perfpipe micro-benchmark.
- New interface to turn PSI on/off on a per cgroup level.
* tag 'sched-psi-2022-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/psi: Per-cgroup PSI accounting disable/re-enable interface
sched/psi: Cache parent psi_group to speed up group iteration
sched/psi: Consolidate cgroup_psi()
sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure
sched/psi: Remove NR_ONCPU task accounting
sched/psi: Optimize task switch inside shared cgroups again
sched/psi: Move private helpers to sched/stats.h
sched/psi: Save percpu memory when !psi_cgroups_enabled
sched/psi: Don't create cgroup PSI files when psi_disabled
sched/psi: Fix periodic aggregation shut off
Pull arm64 fixes from Catalin Marinas:
- Cortex-A55 errata workaround (repeat TLBI)
- AMPERE1 added to the Spectre-BHB affected list
- MTE fix to avoid setting PG_mte_tagged if no tags have been touched
on a page
- Fixed typo in the SCTLR_EL1.SPINTMASK bit naming (the commit log has
other typos)
- perf: return value check in ali_drw_pmu_probe(),
ALIBABA_UNCORE_DRW_PMU dependency on ACPI
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add AMPERE1 to the Spectre-BHB affected list
arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored
MAINTAINERS: rectify file entry in ALIBABA PMU DRIVER
drivers/perf: ALIBABA_UNCORE_DRW_PMU should depend on ACPI
drivers/perf: fix return value check in ali_drw_pmu_probe()
arm64: errata: Add Cortex-A55 to the repeat tlbi list
arm64/sysreg: Fix typo in SCTR_EL1.SPINTMASK
Pull more RISC-V updates from Palmer Dabbelt:
- DT updates for the PolarFire SOC
- a fix to correct the handling of write-only mappings
- m{vetndor,arcd,imp}id is now in /proc/cpuinfo
- the SiFive L2 cache controller support has been refactored to also
support L3 caches
- misc fixes, cleanups and improvements throughout the tree
* tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
MAINTAINERS: add RISC-V's patchwork
RISC-V: Make port I/O string accessors actually work
riscv: enable software resend of irqs
RISC-V: Re-enable counter access from userspace
riscv: vdso: fix NULL deference in vdso_join_timens() when vfork
riscv: Add cache information in AUX vector
soc: sifive: ccache: define the macro for the register shifts
soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes
soc: sifive: ccache: reduce printing on init
soc: sifive: ccache: determine the cache level from dts
soc: sifive: ccache: Rename SiFive L2 cache to Composable cache.
dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache
riscv: check for kernel config option in t-head memory types errata
riscv: use BIT() marco for cpufeature probing
riscv: use BIT() macros in t-head errata init
riscv: drop some idefs from CMO initialization
riscv: cleanup svpbmt cpufeature probing
riscv: Pass -mno-relax only on lld < 15.0.0
RISC-V: Avoid dereferening NULL regs in die()
dt-bindings: riscv: add new riscv,isa strings for emulators
...
Emails to Krzysztof Opasiak bounce ("Recipient address rejected: User
unknown") so drop his email from maintainers of s3fwrn5 NFC bindings and
driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull devicetree fixes from Rob Herring:
- Fixes for Mediatek MT6370 binding
- Merge the DT overlay maintainer entry to the main entry as Pantelis
is not active and Frank is taking a step back
* tag 'devicetree-fixes-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
MAINTAINERS: of: collapse overlay entry into main device tree entry
dt-bindings: mfd: mt6370: fix the interrupt order of the charger in the example
dt-bindings: leds: mt6370: Fix MT6370 LED indicator DT warning
Commit d206cef03c ("ACPI: docs: Drop useless DSDT override documentation")
removes useless DSDT override documentation. However, the commit forgets
to prune the documentation entry from table of contents of ACPI admin
guide documentation, hence triggers Sphinx warning:
Documentation/admin-guide/acpi/index.rst:8: WARNING: toctree contains reference to nonexisting document 'admin-guide/acpi/dsdt-override'
Prune the entry to fix the warning.
Fixes: d206cef03c ("ACPI: docs: Drop useless DSDT override documentation")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Zong Li <zong.li@sifive.com> says:
Since composable cache may be L3 cache if private L2 cache exists, we
should use its original name "composable cache" to prevent confusion.
This patchset contains the modification which is related to ccache, such
as DT binding and EDAC driver.
* b4-shazam-merge:
riscv: Add cache information in AUX vector
soc: sifive: ccache: define the macro for the register shifts
soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes
soc: sifive: ccache: reduce printing on init
soc: sifive: ccache: determine the cache level from dts
soc: sifive: ccache: Rename SiFive L2 cache to Composable cache.
dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache
Link: https://lore.kernel.org/r/20220913061817.22564-1-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull documentation fixes from Jonathan Corbet:
"A handful of relatively simple documentation fixes, plus a set of
patches catching the Chinese translation up with the front-page
rework"
* tag 'docs-6.1-2' of git://git.lwn.net/linux:
Documentation: rtla: Correct command line example
docs/zh_CN: add a man-pages link to zh_CN/index.rst
docs/zh_CN: Rewrite the Chinese translation front page
docs/zh_CN: add zh_CN/arch.rst
docs/zh_CN: promote the title of zh_CN/process/index.rst
docs/zh_CN: Update the translation of page_owner to 6.0-rc7
docs/zh_CN: Update the translation of ksm to 6.0-rc7
docs/howto: Replace abundoned URL of gmane.org
Documentation: ubifs: Fix compression idiom
Documentation/mm/page_owner.rst: delete frequently changing experimental data
docs/zh_CN: Fix build warning
docs: ftrace: Correct access mode
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, and wifi.
Current release - regressions:
- Revert "net/sched: taprio: make qdisc_leaf() see the
per-netdev-queue pfifo child qdiscs", it may cause crashes when the
qdisc is reconfigured
- inet: ping: fix splat due to packet allocation refactoring in inet
- tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF
due to races when per-netns hash table is used
Current release - new code bugs:
- eth: adin1110: check in netdev_event that netdev belongs to driver
- fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co.
Previous releases - regressions:
- ipv4: handle attempt to delete multipath route when fib_info
contains an nh reference, avoid oob access
- wifi: fix handful of bugs in the new Multi-BSSID code
- wifi: mt76: fix rate reporting / throughput regression on mt7915
and newer, fix checksum offload
- wifi: iwlwifi: mvm: fix double list_add at
iwl_mvm_mac_wake_tx_queue (other cases)
- wifi: mac80211: do not drop packets smaller than the LLC-SNAP
header on fast-rx
Previous releases - always broken:
- ieee802154: don't warn zero-sized raw_sendmsg()
- ipv6: ping: fix wrong checksum for large frames
- mctp: prevent double key removal and unref
- tcp/udp: fix memory leaks and races around IPV6_ADDRFORM
- hv_netvsc: fix race between VF offering and VF association message
Misc:
- remove -Warray-bounds silencing in the drivers, compilers fixed"
* tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
sunhme: fix an IS_ERR() vs NULL check in probe
net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
kcm: avoid potential race in kcm_tx_work
tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
net: phy: micrel: Fixes FIELD_GET assertion
openvswitch: add nf_ct_is_confirmed check before assigning the helper
tcp: Fix data races around icsk->icsk_af_ops.
ipv6: Fix data races around sk->sk_prot.
tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
tcp/udp: Fix memory leak in ipv6_renew_options().
mctp: prevent double key removal and unref
selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1
netfilter: rpfilter/fib: Populate flowic_l3mdev field
selftests: netfilter: Test reverse path filtering
net/mlx5: Make ASO poll CQ usable in atomic context
tcp: cdg: allow tcp_cdg_release() to be called multiple times
inet: ping: fix recent breakage
ipv6: ping: fix wrong checksum for large frames
net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports
...
Pull watchdog updates from Wim Van Sebroeck:
- new driver for Exar/MaxLinear XR28V38x
- support for exynosautov9 SoC
- support for Renesas R-Car V5H (R8A779G0) and RZ/V2M (r9a09g011) SoC
- support for imx93
- several other fixes and improvements
* tag 'linux-watchdog-6.1-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: twl4030_wdt: add missing mod_devicetable.h include
dt-bindings: watchdog: migrate mt7621 text bindings to YAML
watchdog: sp5100_tco: Add "action" module parameter
watchdog: imx93: add watchdog timer on imx93
watchdog: imx7ulp_wdt: init wdog when it was active
watchdog: imx7ulp_wdt: Handle wdog reconfigure failure
watchdog: imx7ulp_wdt: Fix RCS timeout issue
watchdog: imx7ulp_wdt: Check CMD32EN in wdog init
watchdog: imx7ulp: Add explict memory barrier for unlock sequence
watchdog: imx7ulp: Move suspend/resume to noirq phase
watchdog: rti-wdt:using the pm_runtime_resume_and_get to simplify the code
dt-bindings: watchdog: rockchip: add rockchip,rk3128-wdt
watchdog: s3c2410_wdt: support exynosautov9 watchdog
dt-bindings: watchdog: add exynosautov9 compatible
watchdog: npcm: Enable clock if provided
watchdog: meson: keep running if already active
watchdog: dt-bindings: atmel,at91sam9-wdt: convert to json-schema
watchdog: armada_37xx_wdt: Fix .set_timeout callback
watchdog: sa1100: make variable sa1100dog_driver static
watchdog: w83977f_wdt: Fix comment typo
...
Pull ceph updates from Ilya Dryomov:
"A quiet round this time: several assorted filesystem fixes, the most
noteworthy one being some additional wakeups in cap handling code, and
a messenger cleanup"
* tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client:
ceph: remove Sage's git tree from documentation
ceph: fix incorrectly showing the .snap size for stat
ceph: fail the open_by_handle_at() if the dentry is being unlinked
ceph: increment i_version when doing a setattr with caps
ceph: Use kcalloc for allocating multiple elements
ceph: no need to wait for transition RDCACHE|RD -> RD
ceph: fail the request if the peer MDS doesn't support getvxattr op
ceph: wake up the waiters if any new caps comes
libceph: drop last_piece flag from ceph_msg_data_cursor
Conor Dooley <mail@conchuod.ie> says:
From: Conor Dooley <conor.dooley@microchip.com>
The device trees produced automatically for the virt and spike machines
fail dt-validate on several grounds. Some of these need to be fixed in
the linux kernel's dt-bindings, but others are caused by bugs in QEMU.
Patches been sent that fix the QEMU issues [0], but a couple of them
need to be fixed in the kernel's dt-bindings. The first patches add
compatibles for "riscv,{clint,plic}0" which are present in drivers and
the auto generated QEMU dtbs.
Thanks to Rob Herring for reporting these issues [1],
Conor.
To reproduce the errors:
./build/qemu-system-riscv64 -nographic -machine virt,dumpdtb=qemu.dtb
dt-validate -p /path/to/linux/kernel/Documentation/devicetree/bindings/processed-schema.json qemu.dtb
(The processed schema needs to be generated first)
0 - https://lore.kernel.org/linux-riscv/20220810184612.157317-1-mail@conchuod.ie/
1 - https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
* fix-dt-validate:
dt-bindings: riscv: add new riscv,isa strings for emulators
dt-bindings: interrupt-controller: sifive,plic: add legacy riscv compatible
dt-bindings: timer: sifive,clint: add legacy riscv compatible
Link: https://lore.kernel.org/r/20220823183319.3314940-1-mail@conchuod.ie
[Palmer: some cover letter pruning, and dropped #4 as suggested.]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The QEMU virt and spike machines currently export a riscv,isa string of
"rv64imafdcsuh",
While the RISC-V foundation has been ratifying a bunch of extenstions
etc, the kernel has remained relatively static with what hardware is
supported - but the same is not true of QEMU. Using the virt machine
and running dt-validate on the dumped dtb fails, partly due to the
unexpected isa string.
Rather than enumerate the many many possbilities, change the pattern
to a regex, with the following assumptions:
- ima are required
- the single letter order is fixed & we don't care about things that
can't even do "ima"
- the standard multi letter extensions are all in a "_z<foo>" format
where the first letter of <foo> is a valid single letter extension
- _s & _h are used for supervisor and hyper visor extensions
- convention says that after the first two chars, a standard multi
letter extension name could be an english word (ifencei anyone?) so
it's not worth restricting the charset
- as the above is just convention, don't apply any charset restrictions
to reduce future churn
- vendor ISA extensions begind with _x and have no charset restrictions
- we don't care about an e extension from an OS pov
- that attempting to validate the contents of the multiletter extensions
with dt-validate beyond the formatting is a futile, massively verbose
or unwieldy exercise at best
The following limitations also apply:
- multi letter extension ordering is not enforced. dt-schema does not
appear to allow for named match groups, so the resulting regex would
be even more of a headache
- ditto for the numbered extensions
Finally, add me as a maintainer of the binding so that when it breaks
in the future, I can be held responsible!
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220823183319.3314940-4-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
While "real" hardware might not use the compatible string "riscv,plic0"
it is present in the driver & QEMU uses it for automatically generated
virt machine dtbs. To avoid dt-validate problems with QEMU produced
dtbs, such as the following, add it to the binding.
riscv-virt.dtb: plic@c000000: compatible: 'oneOf' conditional failed, one must be fixed:
'sifive,plic-1.0.0' is not one of ['sifive,fu540-c000-plic', 'starfive,jh7100-plic', 'canaan,k210-plic']
'sifive,plic-1.0.0' is not one of ['allwinner,sun20i-d1-plic']
'sifive,plic-1.0.0' was expected
'thead,c900-plic' was expected
riscv-virt.dtb: plic@c000000: '#address-cells' is a required property
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220823183319.3314940-3-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull more KUnit updates from Shuah Khan:
"Features and fixes:
- simplify resource use
- make kunit_malloc() and kunit_free() allocations and frees
consistent. kunit_free() frees only the memory allocated by
kunit_malloc()
- stop downloading risc-v opensbi binaries using wget
- other fixes and improvements to tool and KUnit framework"
* tag 'linux-kselftest-kunit-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Update description of --alltests option
kunit: declare kunit_assert structs as const
kunit: rename base KUNIT_ASSERTION macro to _KUNIT_FAILED
kunit: remove format func from struct kunit_assert, get it to 0 bytes
kunit: tool: Don't download risc-v opensbi firmware with wget
kunit: make kunit_kfree(NULL) a no-op to match kfree()
kunit: make kunit_kfree() not segfault on invalid inputs
kunit: make kunit_kfree() only work on pointers from kunit_malloc() and friends
kunit: drop test pointer in string_stream_fragment
kunit: string-stream: Simplify resource use
Microchip RISC-V devicetrees for v6.1
Fixups, reference design changes and new boards:
- The addition of QSPI support for mpfs had a corresponding change to
the devicetree node.
- The v2022.{09,10} reference designs brought with them several memory
map changes which are not backwards compatible. The old devicetrees
from the v2022.08 and earlier releases still work with current
kernels.
- Two new devicetrees for a first-party development kit and for the
Aries Embedded M100FPSEVP kit.
- Corresponding dt-bindings changes for the above.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'dt-for-palmer-v6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: microchip: fix fabric i2c reg size
riscv: dts: microchip: update memory configuration for v2022.10
riscv: dts: microchip: add a devicetree for aries' m100pfsevp
riscv: dts: microchip: add sevkit device tree
riscv: dts: microchip: reduce the fic3 clock rate
riscv: dts: microchip: icicle: re-jig fabric peripheral addresses
riscv: dts: microchip: icicle: update pci address properties
riscv: dts: microchip: move the mpfs' pci node to -fabric.dtsi
riscv: dts: microchip: add pci dma ranges for the icicle kit
dt-bindings: riscv: microchip: document the sev kit
dt-bindings: riscv: microchip: document the aries m100pfsevp
dt-bindings: riscv: microchip: document icicle reference design
riscv: dts: microchip: add qspi compatible fallback
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull more Kselftest updates from Shuah Khan:
"This consists of fixes and improvements to memory-hotplug test and a
minor spelling fix to ftrace test"
* tag 'linux-kselftest-next-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
docs: notifier-error-inject: Correct test's name
selftests/memory-hotplug: Adjust log info for maintainability
selftests/memory-hotplug: Restore memory before exit
selftests/memory-hotplug: Add checking after online or offline
selftests/ftrace: func_event_triggers: fix typo in user message
Pull VFIO updates from Alex Williamson:
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported (Abhishek
Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same (Jason
Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to exist
with NULL iommu_group pointer to support existing userspace use cases
of holding the group file open (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that fall
out from previous refactoring (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper (Alex
Williamson)
* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
vfio: More vfio_file_is_group() use cases
vfio: Make the group FD disassociate from the iommu_group
vfio: Hold a reference to the iommu_group in kvm for SPAPR
vfio: Add vfio_file_is_group()
vfio: Change vfio_group->group_rwsem to a mutex
vfio: Remove the vfio_group->users and users_comp
vfio/mdev: add mdev available instance checking to the core
vfio/mdev: consolidate all the description sysfs into the core code
vfio/mdev: consolidate all the available_instance sysfs into the core code
vfio/mdev: consolidate all the name sysfs into the core code
vfio/mdev: consolidate all the device_api sysfs into the core code
vfio/mdev: remove mtype_get_parent_dev
vfio/mdev: remove mdev_parent_dev
vfio/mdev: unexport mdev_bus_type
vfio/mdev: remove mdev_from_dev
vfio/mdev: simplify mdev_type handling
vfio/mdev: embedd struct mdev_parent in the parent data structure
vfio/mdev: make mdev.h standalone includable
drm/i915/gvt: simplify vgpu configuration management
drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
...
Pull xen updates from Juergen Gross:
- Some minor typo fixes
- A fix of the Xen pcifront driver for supporting the device model to
run in a Linux stub domain
- A cleanup of the pcifront driver
- A series to enable grant-based virtio with Xen on x86
- A cleanup of Xen PV guests to distinguish between safe and faulting
MSR accesses
- Two fixes of the Xen gntdev driver
- Two fixes of the new xen grant DMA driver
* tag 'for-linus-6.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Kconfig: Fix spelling mistake "Maxmium" -> "Maximum"
xen/pv: support selecting safe/unsafe msr accesses
xen/pv: refactor msr access functions to support safe and unsafe accesses
xen/pv: fix vendor checks for pmu emulation
xen/pv: add fault recovery control to pmu msr accesses
xen/virtio: enable grant based virtio on x86
xen/virtio: use dom0 as default backend for CONFIG_XEN_VIRTIO_FORCE_GRANT
xen/virtio: restructure xen grant dma setup
xen/pcifront: move xenstore config scanning into sub-function
xen/gntdev: Accommodate VMA splitting
xen/gntdev: Prevent leaking grants
xen/virtio: Fix potential deadlock when accessing xen_grant_dma_devices
xen/virtio: Fix n_pages calculation in xen_grant_dma_map(unmap)_page()
xen/xenbus: Fix spelling mistake "hardward" -> "hardware"
xen-pcifront: Handle missed Connected state
Pull non-MM updates from Andrew Morton:
- hfs and hfsplus kmap API modernization (Fabio Francesco)
- make crash-kexec work properly when invoked from an NMI-time panic
(Valentin Schneider)
- ntfs bugfixes (Hawkins Jiawei)
- improve IPC msg scalability by replacing atomic_t's with percpu
counters (Jiebin Sun)
- nilfs2 cleanups (Minghao Chi)
- lots of other single patches all over the tree!
* tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype
proc: test how it holds up with mapping'less process
mailmap: update Frank Rowand email address
ia64: mca: use strscpy() is more robust and safer
init/Kconfig: fix unmet direct dependencies
ia64: update config files
nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
fork: remove duplicate included header files
init/main.c: remove unnecessary (void*) conversions
proc: mark more files as permanent
nilfs2: remove the unneeded result variable
nilfs2: delete unnecessary checks before brelse()
checkpatch: warn for non-standard fixes tag style
usr/gen_init_cpio.c: remove unnecessary -1 values from int file
ipc/msg: mitigate the lock contention with percpu counter
percpu: add percpu_counter_add_local and percpu_counter_sub_local
fs/ocfs2: fix repeated words in comments
relay: use kvcalloc to alloc page array in relay_alloc_page_array
proc: make config PROC_CHILDREN depend on PROC_FS
fs: uninline inode_maybe_inc_iversion()
...
Pull interrupt updates from Thomas Gleixner:
"Core code:
- Provide a generic wrapper which can be utilized in drivers to
handle the problem of force threaded demultiplex interrupts on RT
enabled kernels. This avoids conditionals and horrible quirks in
drivers all over the place
- Fix up affected pinctrl and GPIO drivers to make them cleanly RT
safe
Interrupt drivers:
- A new driver for the FSL MU platform specific MSI implementation
- Make irqchip_init() available for pure ACPI based systems
- Provide a functional DT binding for the Realtek RTL interrupt chip
- The usual DT updates and small code improvements all over the
place"
* tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip: IMX_MU_MSI should depend on ARCH_MXC
irqchip/imx-mu-msi: Fix wrong register offset for 8ulp
irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
irqchip: Add IMX MU MSI controller driver
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END
platform-msi: Export symbol platform_msi_create_irq_domain()
irqchip/realtek-rtl: use parent interrupts
dt-bindings: interrupt-controller: realtek,rtl-intc: require parents
irqchip/realtek-rtl: use irq_domain_add_linear()
irqchip: Make irqchip_init() usable on pure ACPI systems
bcma: gpio: Use generic_handle_irq_safe()
gpio: mlxbf2: Use generic_handle_irq_safe()
platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe()
ssb: gpio: Use generic_handle_irq_safe()
pinctrl: amd: Use generic_handle_irq_safe()
...
The RISC-V ISA manual used to mandate that misaligned accesses were
supported in user mode, but that requirement was removed in 2018 via
riscv-isa-manual commit 61cadb9 ("Provide new description of misaligned
load/store behavior compatible with privileged architecture."). Since
the Linux uABI was already frozen at that point it's just been demoted
to part of the uABI, but that was never written down.
Link: https://lore.kernel.org/r/20220728210715.17214-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull more kvm updates from Paolo Bonzini:
"The main batch of ARM + RISC-V changes, and a few fixes and cleanups
for x86 (PMU virtualization and selftests).
ARM:
- Fixes for single-stepping in the presence of an async exception as
well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only systems
- Fixes for the dirty-ring API, allowing it to work on architectures
with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
RISC-V:
- Improved instruction encoding infrastructure for instructions not
yet supported by binutils
- Svinval support for both KVM Host and KVM Guest
- Zihintpause support for KVM Guest
- Zicbom support for KVM Guest
- Record number of signal exits as a VCPU stat
- Use generic guest entry infrastructure
x86:
- Misc PMU fixes and cleanups.
- selftests: fixes for Hyper-V hypercall
- selftests: fix nx_huge_pages_test on TDP-disabled hosts
- selftests: cleanups for fix_hypercall_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (57 commits)
riscv: select HAVE_POSIX_CPU_TIMERS_TASK_WORK
RISC-V: KVM: Use generic guest entry infrastructure
RISC-V: KVM: Record number of signal exits as a vCPU stat
RISC-V: KVM: add __init annotation to riscv_kvm_init()
RISC-V: KVM: Expose Zicbom to the guest
RISC-V: KVM: Provide UAPI for Zicbom block size
RISC-V: KVM: Make ISA ext mappings explicit
RISC-V: KVM: Allow Guest use Zihintpause extension
RISC-V: KVM: Allow Guest use Svinval extension
RISC-V: KVM: Use Svinval for local TLB maintenance when available
RISC-V: Probe Svinval extension form ISA string
RISC-V: KVM: Change the SBI specification version to v1.0
riscv: KVM: Apply insn-def to hlv encodings
riscv: KVM: Apply insn-def to hfence encodings
riscv: Introduce support for defining instructions
riscv: Add X register names to gpr-nums
KVM: arm64: Advertise new kvmarm mailing list
kvm: vmx: keep constant definition format consistent
kvm: mmu: fix typos in struct kvm_arch
KVM: selftests: Fix nx_huge_pages_test on TDP-disabled hosts
...
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Add support for AMD on 'perf mem' and 'perf c2c', the kernel
enablement patches went via tip.
Example:
$ sudo perf mem record -- -c 10000
^C[ perf record: Woken up 227 times to write data ]
[ perf record: Captured and wrote 58.760 MB perf.data (836978 samples) ]
$ sudo perf mem report -F mem,sample,snoop
Samples: 836K of event 'ibs_op//', Event count (approx.): 8418762
Memory access Samples Snoop
N/A 700620 N/A
L1 hit 126675 N/A
L2 hit 424 N/A
L3 hit 664 HitM
L3 hit 10 N/A
Local RAM hit 2 N/A
Remote RAM (1 hop) hit 8558 N/A
Remote Cache (1 hop) hit 3 N/A
Remote Cache (1 hop) hit 2 HitM
Remote Cache (2 hops) hit 10 HitM
Remote Cache (2 hops) hit 6 N/A
Uncached hit 4 N/A
$
- "perf lock" improvements:
- Add -E/--entries option to limit the number of entries to
display, say to ask for just the top 5 contended locks.
- Add -q/--quiet option to suppress header and debug messages.
- Add a 'perf test' kernel lock contention entry to test 'perf
lock'.
- "perf lock contention" improvements:
- Ask BPF's bpf_get_stackid() to skip some callchain entries.
The ones closer to the tooling are bpf related and not that
interesting, the ones calling the locking function are the ones
we're interested in, example of a full, unskipped callstack:
- Allow changing the callstack depth and number of entries to skip.
1 10.74 us 10.74 us 10.74 us spinlock __bpf_trace_contention_begin+0xb
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffbb8b8e75 bpf_trace_run2+0x35
0xffffffffbb7eab9b __bpf_trace_contention_begin+0xb
0xffffffffbb7ebe75 queued_spin_lock_slowpath+0x1f5
0xffffffffbc1c26ff _raw_spin_lock+0x1f
0xffffffffbb841015 tick_do_update_jiffies64+0x25
0xffffffffbb8409ee tick_irq_enter+0x9e
- Show full callstack in verbose mode (-v option), sometimes this
is desirable instead of showing just one callstack entry.
- Allow multiple time ranges in 'perf record --delay' to help in
reducing the amount of data collected from hardware tracing (Intel
PT, etc) when there is a rough idea of periods of time where events
of interest take time.
- Add Intel PT to record only decoder debug messages when error
happens.
- Improve layout of Intel PT man page.
- Add new branch types: alignment, data and inst faults and arch
specific ones, such as fiq, debug_halt, debug_exit, debug_inst and
debug_data on arm64.
Kernel enablement went thru the tip tree.
- Fix 'perf probe' error log check in 'perf test' when no debuginfo is
available.
- Fix 'perf stat' aggregation mode logic, it should be looking at the
CPU not at the core number.
- Fix flags parsing in 'perf trace' filters.
- Introduce compact encoding of CPU range encoding on perf.data, to
avoid having a bitmap with all the CPUs.
- Improvements to the 'perf stat' metrics, including adding
"core_wide", and computing "smt" from the CPU topology.
- Add support to the new PERF_FORMAT_LOST perf_event_attr.read_format,
that allows tooling to ask for the precise number of lost samples for
a given event.
- Add 'addr' sort key to see just the address of sampled instructions:
$ perf record -o- true | perf report -i- -s addr
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
# Samples: 12 of event 'cycles:u'
# Event count (approx.): 252512
#
# Overhead Address
# ........ ..................
42.96% 0x7f96f08443d7
29.55% 0x7f96f0859b50
14.76% 0x7f96f0852e02
8.30% 0x7f96f0855028
4.43% 0xffffffff8de01087
perf annotate: Toggle full address <-> offset display
- Add 'f' hotkey to the 'perf annotate' TUI interface when in
'disassembler output' mode ('o' hotkey) to toggle showing full
virtual address or just the offset.
- Cache DSO build-ids when synthesizing PERF_RECORD_MMAP records for
pre-existing threads, at the start of a 'perf record' session,
speeding up that record startup phase.
- Add a command line option to specify build ids in 'perf inject'.
- Update JSON event files for the Intel alderlake, broadwell,
broadwellde, broadwellx, cascadelakex, haswell, haswellx, icelake,
icelakex, ivybridge, ivytown, jaketown, sandybridge, sapphirerapids,
skylake, skylakex, and tigerlake processors.
- Update vendor JSON event files for the ARM Neoverse V1 and E1
platforms.
- Add a 'perf test' entry for 'perf mem' where a struct has false
sharing and this gets detected in the 'perf mem' output, tested with
Intel, AMD and ARM64 systems.
- Add a 'perf test' entry to test the resolution of java symbols, where
an output like this is expected:
8.18% jshell jitted-50116-29.so [.] Interpreter
0.75% Thread-1 jitted-83602-1670.so [.] jdk.internal.jimage.BasicImageReader.getString(int)
- Add tests for the ARM64 CoreSight hardware tracing feature, with
specially crafted pureloop, memcpy, thread loop and unroll tread that
then gets traced and the output compared with expected output.
Documentation explaining it is also included.
- Add per thread Intel PT 'perf test' entry to check that
PERF_RECORD_TEXT_POKE events are recorded per CPU, resulting in a
mixture of per thread and per CPU events and mmaps, verify that this
gets all recorded correctly.
- Introduce pthread mutex wrappers to allow for building with clang's
-Wthread-safety, i.e. using the "guarded_by" "pt_guarded_by"
"lockable", "exclusive_lock_function", "exclusive_trylock_function",
"exclusive_locks_required", and "no_thread_safety_analysis" compiler
function attributes.
- Fix empty version number when building outside of a git repo.
- Improve feature detection display when multiple versions of a feature
are present, such as for binutils libbfd, that has a mix of possible
ways to detect according to the Linux distribution.
Previously in some cases we had:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
... libbfd-liberty: [ on ]
... libbfd-liberty-z: [ on ]
<SNIP>
Now for this case we show just the main feature:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
<SNIP>
- Remove some unused structs, variables, macros, function prototypes
and includes from various places.
* tag 'perf-tools-for-v6.1-1-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (169 commits)
perf script: Add missing fields in usage hint
perf mem: Print "LFB/MAB" for PERF_MEM_LVLNUM_LFB
perf mem/c2c: Avoid printing empty lines for unsupported events
perf mem/c2c: Add load store event mappings for AMD
perf mem/c2c: Set PERF_SAMPLE_WEIGHT for LOAD_STORE events
perf mem: Add support for printing PERF_MEM_LVLNUM_{CXL|IO}
perf amd ibs: Sync arch/x86/include/asm/amd-ibs.h header with the kernel
tools headers UAPI: Sync include/uapi/linux/perf_event.h header with the kernel
perf stat: Fix cpu check to use id.cpu.cpu in aggr_printout()
perf test coresight: Add relevant documentation about ARM64 CoreSight testing
perf test: Add git ignore for tmp and output files of ARM CoreSight tests
perf test coresight: Add unroll thread test shell script
perf test coresight: Add unroll thread test tool
perf test coresight: Add thread loop test shell scripts
perf test coresight: Add thread loop test tool
perf test coresight: Add memcpy thread test shell script
perf test coresight: Add memcpy thread test tool
perf test: Add git ignore for perf data generated by the ARM CoreSight tests
perf test: Add arm64 asm pureloop test shell script
perf test: Add asm pureloop test tool
...
