Currently the HDMI driver uses always limited range RGB output. This
patch improves the behavior by using limited range only if the output is
identified as a HDMI display, and VIC > 1.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-7-tomi.valkeinen@ti.com
The core.c just for registering the drivers is kind of useless. Let's
get rid of it and register the dss drivers in dss.c.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-6-tomi.valkeinen@ti.com
OMAP2 and OMAP3/AM4 have limitations with the scaler:
- OMAP2 can only scale XRGB8888
- OMAP3/AM4 can only scale XRGB8888, RGB565, YUYV and UYVY
The driver doesn't check these limitations, which leads to sync-lost
floods.
This patch adds a check for the pixel formats when scaling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-5-tomi.valkeinen@ti.com
A "HDMI I2C Master Error" is sometimes reported with the current DDC SCL
timings. The current settings for a 10us SCL period (100 KHz) causes the
error with some displays. This patch increases the SCL signal period
from 10us to 10.2us, with the new settings the error is not observed
Signed-off-by: Alejandro Hernandez <ajhernandez@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-4-tomi.valkeinen@ti.com
Commit d49cd15550 ("OMAPDSS: DISPC: lock
access to DISPC_CONTROL & DISPC_CONFIG") added locking to
mgr_fld_write(). This was needed in omapfb times due to lack of good
locking, especially in the case of both V4L2 and fbdev layers using the
DSS driver.
This is not needed for omapdrm, so we can remove the locking.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-2-tomi.valkeinen@ti.com
By putting cursor BOs at the high end of the video memory, we can avoid
memory fragmentation. Starting at the low end, contiguous video memory is
available for framebuffers.
The patch also simplifies the buffer swapping and aligns it with the
ast driver. If there are more drivers with similar requirements, the
code could be moved into a shared place.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-8-tzimmermann@suse.de
The double-buffered cursor image is currently stored in video memory
by creating two BOs and pinning them to VRAM. The exact location is
chosen by VRAM helpers. The pinned cursor BOs can conflict with
framebuffer BOs and prevent the primary plane from displaying its
framebuffer.
As a first step to solving this problem, we reserve dedicated space at
the high end of the video memory for the cursor images. As the amount
of video memory now differs from the amount of available framebuffer
memory, size tests are adapted accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-7-tzimmermann@suse.de
Separating the management of buffer objects from updating the hardware
cursor buffer gives the code more structure. While doing this, we can
further split the image-update code into code for writing the buffer,
setting the base scan-out address, and enabling the cursor. The first
two operations are in dedicated functions update() and set_base().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-5-tzimmermann@suse.de
By putting cursor BOs at the high end of the video memory, we can avoid
memory fragmentation. Starting at the low end, contiguous video memory is
available for framebuffers.
The patch also simplifies the buffer swapping by splitting
struct ast_private.cursor_cache BO into two separate boffer objects. Cursor
images alternate between these buffers instead of offsets within cursor_cache.
v3:
* fixes space-before-tab error near AST_HWC_SIGNATURE_CHECKSUM
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927090309.10254-6-tzimmermann@suse.de
A call to ast's show-cursor function now receives the cursor image
and updates the buffer. The change splits off image update and
base-address update into separate functions.
v3:
* move ast_{show,hide}_cursor() in a previous patch
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927090309.10254-4-tzimmermann@suse.de
Separating the cursor's move() function from the show() function in
preparation of further rework of the cursor update code.
'Showing' the cursor from within the move() function is required to
update the cursor position.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927090309.10254-2-tzimmermann@suse.de
- Fix dsc dpp calculations
- Fix g4x sprite scaling stride check with GTT remapping
Short summary of fixes pull (less than what git shortlog provides):
- explain anything non-fixes (e.g. cleanups) and why it's appropriate
- highlight regressions
- summarize pull requests contained
This shouldn't be more than a few lines (or it indicates your fixes pull is a
bit too big).
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdlkvzAAoJEPpiX2QO6xPKKXgIALMMAvQGqQ1zYK852zBl74fJ
ou4Ig0xQN25lhx0cMiefAolsT3pbo/FZ/RQmhDuVMrg2xxWx3vVm0y1kPMefs/Zs
Hrva65elI6DaYG7mXTclPTz8sPDQ66Mn5vXpb9biSvZc9DBEORYPsmGOPHdcQ1NG
GBie/Ct66nDja1taREFqPIu/Z6TKlGtJRcslDmChLfPq9GXYPAfFB3NpP0f1yomd
mSEURPo8kYC2seFfV6nJoAMijnT6oBkgM1AickK1qGvvbmmFs4g/kW+jkjqrl5Sl
oMZ8OXL5LOZ1OgVN+Uf5P2X3dB7TeUEVInWQkS5beCJIL9p3aGSwzXjUJGgu/m0=
=j1HZ
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2019-10-03-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix DP-MST crtc_mask
- Fix dsc dpp calculations
- Fix g4x sprite scaling stride check with GTT remapping
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003193051.GA26421@intel.com
- A clock fix for OMAP
- A memory leak fix for Komeda
- Some fixes for resources cleanups with writeback
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXZWsmAAKCRDj7w1vZxhR
xUFsAP450HCcj+9OzT6tk05zkMPSZeNwXHVSm5O7qN1W9qRFGQD+P8mWuPMfvymw
IOB/LhHd6J/95uGflUZdxwxv/HYlswk=
=Mq5n
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-10-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- One include fix for tilcdc
- A clock fix for OMAP
- A memory leak fix for Komeda
- Some fixes for resources cleanups with writeback
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081031.oykms5fg4tijvdri@gilmour
This reverts commit 4eaceea3a0.
Several userspace clients (modesetting ddx and mutter+wayland at least)
handle encoder.possible_crtcs incorrectly. What they essentially do is
the following:
possible_crtcs = ~0;
for_each_possible_encoder(connector)
possible_crtcs &= encoder->possible_crtcs;
Ie. they calculate the intersection of the possible_crtcs
for the connector when they really should be calculating the
union instead.
In our case each MST encoder now has just one unique bit set,
and so the intersection is always zero. The end result is that
MST connectors can't be lit up because no crtc can be found to
drive them.
I've submitted a fix for the modesetting ddx [1], and complained
on #wayland about mutter, so hopefully the situation will improve
in the future. In the meantime we have regression, and so must go
back to the old way of misconfiguring possible_crtcs in the kernel.
[1] https://gitlab.freedesktop.org/xorg/xserver/merge_requests/277
Cc: Jonas Ådahl <jadahl@gmail.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111507
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903154018.26357-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit e838bfa8e1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit da676c6aa6.
The original commit adds a start parameter to the calculation of the
start delay according to some old BSP versions from Allwinner. However,
there're two ways to add this delay -- add it in DSI controller or add
it in the TCON. Add it in both controllers won't work.
The code before this commit is picked from new versions of BSP kernel,
which has a comment for the 1 that says "put start_delay to tcon". By
checking the sun4i_tcon0_mode_set_cpu() in sun4i_tcon driver, it has
already added this delay, so we shouldn't repeat to add the delay in DSI
controller, otherwise the timing won't match.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001080253.6135-2-icenowy@aosc.io
The LCD timing definitions between Linux DRM vs Allwinner are different,
below diagram shows this clear differences.
Active Front Sync Back
Region Porch Porch
<-----------------------><----------------><--------------><-------------->
//////////////////////|
////////////////////// |
////////////////////// |.................. ................
________________
<----- [hv]display ----->
<------------- [hv]sync_start ------------>
<--------------------- [hv]sync_end ---------------------->
<-------------------------------- [hv]total ------------------------------>
<----- lcd_[xy] --------> <- lcd_[hv]spw ->
<---------- lcd_[hv]bp --------->
<-------------------------------- lcd_[hv]t ------------------------------>
The DSI driver misinterpreted the hbp term from the BSP code to refer
only to the backporch, when in fact it was backporch + sync. Thus the
driver incorrectly used the horizontal front porch plus sync in its
calculation of the DRQ set bit value, when it should not have included
the sync timing.
Including additional sync timings leads to flip_done timed out as:
WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0
[CRTC:46:crtc-0] vblank wait timed out
Modules linked in:
CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00026-g01f0c75b902d-dirty #13
Hardware name: Allwinner sun8i Family
Workqueue: events deferred_probe_work_func
[<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14)
[<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98)
[<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114)
[<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68)
[<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0)
[<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c)
[<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c)
[<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc)
[<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0)
[<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54)
[<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac)
[<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104)
[<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390)
[<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4)
[<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc)
[<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84)
[<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60)
[<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20)
[<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8)
[<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c)
[<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8)
[<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118)
[<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160)
[<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0)
[<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140)
[<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234)
[<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c)
[<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8)
[<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160)
[<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8)
[<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c)
[<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c)
[<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90)
[<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420)
[<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0)
[<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c)
[<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xde539fb0 to 0xde539ff8)
9fa0: 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace b57eb1e5c64c6b8b ]---
random: fast init done
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out
With the terms(as described in above diagram) fixed, the panel
displays correctly without any timeouts.
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-2-jagan@amarulasolutions.com
Allwinner MIPI DSI controllers are supplied with SoC
DSI power rails via VCC-DSI pin.
Add support for this supply pin by adding voltage
regulator handling code to MIPI DSI driver.
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-6-jagan@amarulasolutions.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXZT9tAAKCRDj7w1vZxhR
xRINAP97+MS9gNYCmbyLwR+crlA9/zuDVHht9y6Poh10fuAWwgD8DiJVBxg1k2xB
pjhw4r8Ag+DEjr19+20SrX7Bfxswtg0=
=6ywj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXZWqpwAKCRDj7w1vZxhR
xV02AQCIWxbTyH/fQC46fij20COhPWsQDlcXnG6vbhQmOv+REQD/fnwdsyHLdcWI
n8Kc3XPBrwZcO19O/BH3tPlp/BGLlQE=
=kgC/
-----END PGP SIGNATURE-----
Merge drm-misc-next-fixes-2019-10-02 into drm-misc-fixes
One tilcdc fix was left out in drm-misc-next-fixes and didn't make it
during the merge window. Let's bring it into drm-misc-fixes.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk
(in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not
correct, and using divider of 32 breaks DSS with a flood or underflows
and sync losts. Dividers up to 31 seem to work fine.
There is another patch to the DT files to limit the divider correctly,
but as the DSS driver also needs to know the maximum divider to be able
to iteratively find good rates, we also need to do the fix in the DSS
driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191002122542.8449-1-tomi.valkeinen@ti.com
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
I forgot to update the g4x sprite scaling stride check when GTT
remapping was introduced. The stride of the original framebuffer
is irrelevant when remapping is used and instead we want to check
the stride of the remapped view.
Also drop the duplicate width_bytes check. We already check that
a few lines earlier.
Fixes: df79cf4419 ("drm/i915: Store the final plane stride in plane_state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930183045.662-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 006e570128)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There was a integer wraparound when mode_clock became too high,
and we didn't correct for the FEC overhead factor when dividing,
with the calculations breaking at HBR3.
As a result our calculated bpp was way too high, and the link width
limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just
in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%,
all the calculations use 1/0.972261, and the same ratio should be
applied to data M/N as well, so use it there when FEC is enabled.
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Changes since v3:
- Remove bogus fec_to_mode_clock. (Ville)
Changes since v4:
- Use the correct register for icl. (Ville)
- Split hw readout to a separate patch.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: d9218c8f6c ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
Cc: <stable@vger.kernel.org> # v5.0+
Cc: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925082110.17439-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit ed06efb801)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If execlists's lite-restore is based on the common GEM context tag
rather than the per-intel_context LRCA, then a context switch between
two intel_contexts on the same engine derived from the same GEM context
will perform a lite-restore instead of a full context switch. We can
exploit this by poisoning the ringbuffer of the first context and trying
to trick a simple RING_TAIL update (i.e. lite-restore)
v2: Also check what happens if preempt ce[0] with ce[1] (both instances
on the same engine from the same parent context) [Tvrtko]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002183459.26614-1-chris@chris-wilson.co.uk
All the MG registers is based on the tc_port not port, so
MG_PHY_PORT_LN() was subtracting port and PORT_C what is very
fragile.
So replacing port to tc_port in all MG register macros and users
like we have for DKL.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001193729.123736-1-jose.souza@intel.com
Just like all the other variants, this one passes invalid
compile-time options with clang after the new code got
merged:
clang: error: unknown argument: '-mpreferred-stack-boundary=4'
scripts/Makefile.build:265: recipe for target 'drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.o' failed
Use the same variant that we have for dcn20 to fix compilation.
Fixes: eced51f9ba ("drm/amd/display: Add hubp block for Renoir (v2)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without CONFIG_DEBUG_FS, we get a warning for an unused
variable:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6020:33: error: unused variable 'source' [-Werror,-Wunused-variable]
Hide the variable in an #ifdef like its only users.
Fixes: 14b2584636 ("drm/amd/display: add functionality to grab DPRX CRC entries.")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The type definition for 'uint' clashes with the generic kernel
headers:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:43:22: error: redefinition of typedef 'uint' is a C11 feature [-Werror,-Wtypedef-redefinition]
include/linux/types.h:92:23: note: previous definition is here
Just remove this type and use plain 'unsigned int' consistently,
as it is already use almost everywhere in this file.
Fixes: b04641a3f4 ("drm/amd/display: Add Renoir DML")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An earlier patch of mine disabled some #warning statements
that get in the way of build testing, but then another
instance was added around the same time.
Remove that as well.
Fixes: b5203d16ae ("drm/amd/amdgpu: hide #warning for missing DC config")
Fixes: e1c14c4339 ("drm/amdgpu: Enable DC on Renoir")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When CONFIG_PERF_EVENTS is disabled, we cannot compile the pmu
portion of the amdgpu driver:
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:48:38: error: no member named 'hw' in 'struct perf_event'
struct hw_perf_event *hwc = &event->hw;
~~~~~ ^
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:51:13: error: no member named 'attr' in 'struct perf_event'
if (event->attr.type != event->pmu->type)
~~~~~ ^
...
The same bug was already fixed by commit d155bef063 ("amdgpu: make pmu
support optional") but broken again by what looks like an incorrectly
rebased patch.
Fixes: 64f55e6292 ("drm/amdgpu: Add RAS EEPROM table.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In acp_hw_init there are some allocations that needs to be released in
case of failure:
1- adev->acp.acp_genpd should be released if any allocation attemp for
adev->acp.acp_cell, adev->acp.acp_res or i2s_pdata fails.
2- all of those allocations should be released if
mfd_add_hotplug_devices or pm_genpd_add_device fail.
3- Release is needed in case of time out values expire.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UMDs need this for correct programming of harvested chips.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We reset the GPU as part of our hibernation sequence so we need
to make sure we don't mark vram as lost in that case.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111879
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when multithreading access sysfs of amdgpu_pm_info at the sametime.
the swsmu driver cause smu firmware hang.
eg:
single thread access:
Message A + Param A ==> right
Message B + Param B ==> right
Message C + Param C ==> right
multithreading access:
Message A + Param B ==> error
Message B + Param A ==> error
Message C + Param C ==> right
the patch will add sensor lock(mutex) to avoid this error.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.3.x
v2:
change period from 10ms to 100ms (typo error)
too high frequence to update mertrics table will cause smu firmware
error,so change mertrics table update period from 1ms to 100ms
(navi10, 12, 14)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.3.x
This reverts commit a213c2c7e2.
The changes to fix this should have landed in 5.1.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zhou, David(ChunMing) <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For selftests, we desire repeatability and so prefer using a prng with
known seed over true randomness. Extract random_offset() as a selftest
utility that can take the prng state.
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002122430.23205-1-chris@chris-wilson.co.uk
I forgot to update the g4x sprite scaling stride check when GTT
remapping was introduced. The stride of the original framebuffer
is irrelevant when remapping is used and instead we want to check
the stride of the remapped view.
Also drop the duplicate width_bytes check. We already check that
a few lines earlier.
Fixes: df79cf4419 ("drm/i915: Store the final plane stride in plane_state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930183045.662-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Drop the tv_mode NULL check since intel_tv_mode_find() never
actually returns NULL, and flip the condition around so that
the MODE_OK case is at the end, which is customary to all
the other .mode_valid() implementations.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001154629.11063-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
When adding the max plane size checks to the .mode_valid() hooks
I naturally forgot about MST. Take care of that one as well.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 2d20411e25 ("drm/i915: Don't advertise modes that exceed the max plane size")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001154629.11063-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Add helper to check if a drm debug category is enabled. Convert drm core
to use it. No functional changes.
v2: Move unlikely() to drm_debug_enabled() (Eric)
v3: Keep unlikely() when combined with other conditions (Eric)
Cc: Eric Engestrom <eric@engestrom.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001140614.26909-1-jani.nikula@intel.com
Split out the code related to vga client and vgaarb all over the place
into new intel_vga.[ch]. No functional changes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001152506.7854-1-jani.nikula@intel.com
When initially turning a crtc on, drm_reset_vblank_timestamp will
set the vblank timestamp to 0 for any driver that doesn't provide
a ->get_vblank_timestamp() hook.
Unfortunately, the FLIP_COMPLETE event depends on that timestamp,
and the only way to regenerate a valid one is to have vblank
interrupts enabled and have a valid in-ISR call to
drm_crtc_handle_vblank.
Additionally, if the user doesn't request vblanks but _does_ request
FLIP_COMPLETE events, we still don't have a good timestamp: it'll be the
same stamp as the last vblank one.
Work around the issue by always enabling vblanks when the CRTC is on.
Reducing the amount of time that PL0 has to be unmasked would be nice to
fix at a later time.
Changes since v1 [https://patchwork.freedesktop.org/patch/331727/]:
- moved drm_crtc_vblank_put call to the ->atomic_disable() hook
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Ayan kumar halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001142121.13939-1-mihail.atanassov@arm.com
No change in behaviour; IRQ_RETVAL is about twice as popular as
manually writing out the ternary.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Ayan kumar halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920151247.25128-1-mihail.atanassov@arm.com
Commit 554b3529fe ("thermal/drivers/core: Remove the module Kconfig's
option") changed the type of THERMAL from tristate to bool, so
THERMAL || !THERMAL is now always y. Remove the redundant dependency.
Discovered through Kconfiglib detecting a dependency loop. The C tools
simplify the expression to y before running dependency loop detection,
and so don't see it. Changing the type of THERMAL back to tristate makes
the C tools detect the same loop.
Not sure if running dep. loop detection after simplification can be
called a bug. Fixing this nit unbreaks Kconfiglib on the kernel at
least.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927174218.GA32085@huvuddator
Get rid of the drm_fixp_from_fraction() usage and just do the
straightforward calculation directly.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925141442.23236-3-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Make drm_dp_get_vc_payload() tolerate arbitrary DP_LINK_BW_*
values, just like drm_dp_bw_code_to_link_rate() does since commit
57a1b08937 ("drm: Make the bw/link rate calculations more forgiving").
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925141442.23236-2-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Sparse compains:
../drivers/gpu/drm/drm_debugfs_crc.c:350:17: warning: incorrect type in initializer (different base types)
../drivers/gpu/drm/drm_debugfs_crc.c:350:17: expected restricted __poll_t ( *poll )( ... )
../drivers/gpu/drm/drm_debugfs_crc.c:350:17: got unsigned int ( * )( ... )
Change the .poll() return type to __poll_t to silence it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710125143.9965-5-ville.syrjala@linux.intel.com
Reviewed-by: Sean Paul <sean@poorly.run>
Sparse complains:
../drivers/gpu/drm/drm_syncobj.c:942:13: warning: symbol 'drm_timeout_abs_to_jiffies' was not declared. Should it be static?
Include the correct header with the prototype.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710125143.9965-4-ville.syrjala@linux.intel.com
Reviewed-by: Sean Paul <sean@poorly.run>
Sparse is not happy:
../drivers/gpu/drm/drm_memory.c:159:6: warning: symbol 'drm_need_swiotlb' was not declared. Should it be static?
Include the correct header for drm_need_swiotlb() prototype.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710125143.9965-3-ville.syrjala@linux.intel.com
Reviewed-by: Sean Paul <sean@poorly.run>
__be16 = cpu_to_be16(__be16) is nonsense. Do it right.
../drivers/gpu/drm/drm_dsc.c:218:53: warning: incorrect type in assignment (different base types)
../drivers/gpu/drm/drm_dsc.c:218:53: expected restricted __be16
../drivers/gpu/drm/drm_dsc.c:218:53: got int
../drivers/gpu/drm/drm_dsc.c:225:25: warning: cast from restricted __be16
../drivers/gpu/drm/drm_dsc.c:225:25: warning: incorrect type in argument 1 (different base types)
../drivers/gpu/drm/drm_dsc.c:225:25: expected unsigned short [usertype] val
../drivers/gpu/drm/drm_dsc.c:225:25: got restricted __be16
../drivers/gpu/drm/drm_dsc.c:225:25: warning: cast from restricted __be16
../drivers/gpu/drm/drm_dsc.c:225:25: warning: cast from restricted __be16
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: David Francis <David.Francis@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710125143.9965-2-ville.syrjala@linux.intel.com
Reviewed-by: Sean Paul <sean@poorly.run>
Sparse complains:
drivers/gpu/drm/drm_fb_helper.c:2409:12: warning: symbol 'drm_fb_helper_modinit' was not declared. Should it be static?
Include the header with the correct prototype.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710125143.9965-1-ville.syrjala@linux.intel.com
Reviewed-by: Sean Paul <sean@poorly.run>
Unwedging the GPU requires a successful GPU reset before we restore the
default submission, or else we may see residual context switch events
that we were not expecting.
v2: Pull in the special-case reset_clobbers_display, and explain why it
should be safe in the context of unwedging.
v3: Just forget all about resets before unwedging if it will clobber the
display; risk it all.
Reported-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190927160335.10622-1-chris@chris-wilson.co.uk
We currently test context switching on each engine as a basic stress
test (just verifying that nothing explodes if we execute 2 requests from
different contexts sequentially). What we have not tested is what
happens if we try and do so on all available engines simultaneously,
putting our SW and the HW under the maximal stress.
v2: Clone the set of engines from the first context into the secondary
contexts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930144919.27992-1-chris@chris-wilson.co.uk
This was apparently dropped by accident in a recent
cleanup, causing a build failure in some configurations now:
drivers/gpu/drm/tilcdc/tilcdc_tfp410.c:296:12: error: implicit declaration of function 'devm_pinctrl_get_select_default' [-Werror,-Wimplicit-function-declaration]
Fixes: fcb5766417 ("drm/tilcdc: drop use of drmP.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/02b03f74cf941f52a941a36bdc8dabb4a69fd87e.1569852588.git.jsarha@ti.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
When calculating the HDMI PLL settings for a DMT mode PHY frequency,
use the correct max fractional PLL value for G12A VPU.
With this fix, we can finally setup the 1024x768-60 mode.
Fixes: 202b9808f8 ("drm/meson: Add G12A Video Clock setup")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828132311.23881-1-narmstrong@baylibre.com
On systems that have no runtime-pm, we mark the wakeref as being -1. We
therefore cannot use that value for the mock-gt indicator, so opt for
-ENODEV instead. The wakeref should never be an error value -- one
hopes!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927211749.2181-2-chris@chris-wilson.co.uk
As we execute GPU resets on a gt/ basis, and use the intel_gt as the
primary for all other reset functions, also use it for the has-reset?
predicates. Gradually simplifying the churn of pointers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927211749.2181-1-chris@chris-wilson.co.uk
core:
- Some cleanups and fixes in the self-refresh helpers
- Some cleanups and fixes in the atomic helpers
amdgpu:
- Fix a 64 bit divide
- Prevent a memory leak in a failure case in dc
- Load proper gfx firmware on navi14 variants
- Add more navi12 and navi14 PCI ids
- Misc fixes for renoir
- Fix bandwidth issues with multiple displays on vega20
- Support for Dali
- Fix a possible oops with KFD on hawaii
- Fix for backlight level after resume on some APUs
- Other misc fixes
panfrost:
- Multiple panfrost fixes for regulator support and page fault handling
-----BEGIN PGP SIGNATURE-----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=yCyF
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fixes built up over the past 1.5 weeks or so, it's two weeks of
amdgpu, some core cleanups and some panfrost fixes. I also finally
figured out why my desktop was slow to do a bunch of stuff (someone
gave it an IPv6 address which can't reach anything!).
core:
- Some cleanups and fixes in the self-refresh helpers
- Some cleanups and fixes in the atomic helpers
amdgpu:
- Fix a 64 bit divide
- Prevent a memory leak in a failure case in dc
- Load proper gfx firmware on navi14 variants
- Add more navi12 and navi14 PCI ids
- Misc fixes for renoir
- Fix bandwidth issues with multiple displays on vega20
- Support for Dali
- Fix a possible oops with KFD on hawaii
- Fix for backlight level after resume on some APUs
- Other misc fixes
panfrost:
- Multiple panfrost fixes for regulator support and page fault
handling"
* tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/amd/display: prevent memory leak
drm/amdgpu/gfx10: add support for wks firmware loading
drm/amdgpu/display: include slab.h in dcn21_resource.c
drm/amdgpu/display: fix 64 bit divide
drm/panfrost: Prevent race when handling page fault
drm/panfrost: Remove NULL checks for regulator
drm/panfrost: Fix regulator_get_optional() misuse
drm: Measure Self Refresh Entry/Exit times to avoid thrashing
drm: Fix kerneldoc and remove unused struct member in self_refresh helper
drm/atomic: Rename crtc_state->pageflip_flags to async_flip
drm/atomic: Reject FLIP_ASYNC unconditionally
drm/atomic: Take the atomic toys away from X
drm/amdgpu: flag navi12 and 14 as experimental for 5.4
drm/kms: Duct-tape for mode object lifetime checks
drm/amdgpu: add navi12 pci id
drm/amdgpu: add navi14 PCI ID for work station SKU
drm/amdkfd: Swap trap temporary registers in gfx10 trap handler
drm/amd/powerplay: implement sysfs for getting dpm clock
drm/amd/display: Restore backlight brightness after system resume
drm/amd/display: Implement voltage limitation for dali
...
Now that TC support was added, initialize DDIs.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-4-jose.souza@intel.com
Link training is failling when running link at 2.7GHz and 1.62GHz and
following BSpec pll algorithm.
Comparing the values calculated and the ones from the reference table
it looks like MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO should not always set
to 5. For DP ports ICL mg pll algorithm sets it to 10 or 5 based on
div2 value, that matches with dkl hardcoded table.
So implementing this way as it proved to work in HW and leaving a
comment so we know why it do not match BSpec.
v4:
Using the same is_dp check as ICL, need testing on HDMI over tc port
Issue reported on BSpec 49204.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-3-jose.souza@intel.com
Added DKL Phy sequences and helpers functions to program voltage
swing, clock gating and dp mode.
It is not written in DP enabling sequence but "PHY Clockgating
programming" states that clock gating should be enabled after the
link training but doing so causes all the following trainings to fail
so not enabling it for.
v2:
Setting the right HIP_INDEX_REG bits (José)
v3:
Adding the meaning of each column of tgl_dkl_phy_ddi_translations
Adding if gen >= 12 on intel_ddi_hdmi_level() and
intel_ddi_pre_enable_hdmi() instead of reuse part of gen >= 11 if
v4:
Moved the DP_MODE lane programing to another patch as ICL also
needed it
Sharing icl_phy_set_clock_gating() and icl_program_mg_dp_mode() with
TGL as bits and programing as now it almost identical to ICL
BSpec: 49292
BSpec: 49190
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-2-jose.souza@intel.com
BSpec was updated(r146548) with a new MG_DP_MODE Programming table,
now taking in consideration the pin assignment and allowing us to
optimize power by shutting down available but not needed lanes.
It was tested on ICL and TGL, with adaptors that used pin assignment
C and B, reversing the connector and going to different modes testing
the not needed lane shutdown.
v5:
Using crtc_state->lane_count instead of dp.lane_count
BSpec: 21735
BSpec: 49292
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-1-jose.souza@intel.com
We have a new version of DMC for ICL - v1.09.
This version adds the Half Refresh Rate capability
into DMC.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925201250.18136-1-daniele.ceraolospurio@intel.com
The HuC FW has silently switched to encoding the version the same way as
the GuC FW does, i.e. major.minor.patch instead of just major.minor. All
the current blobs follow the new scheme, but since minor and patch are
both zero there is no difference in the end results and we happily load
them. New binaries, however, will have non-zero values in there, so we
need to make sure to parse them correctly.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925222121.4000-1-daniele.ceraolospurio@intel.com
In komeda_wb_connector_add if drm_writeback_connector_init fails the
allocated memory for kwb_conn should be released.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925043031.32308-1-navid.emamdoost@gmail.com
This is a SW workaround for shadow un-flushed when together with the
DOU Timing-disable.
D71 HW doesn't update shadow registers when display output is turned
off. So when we disable all pipeline components together with display
output disabling by one flush or one operation, the disable operation
updated registers will not be flushed or valid in HW, which may lead
problem. To workaround this problem, introduce a two phase disable for
pipeline disable.
Phase1: Disable components with display is on and flush it, this phase
for flushing or validating the shadow registers.
Phase2: Turn-off display output.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906071750.4563-1-lowry.li@arm.com
Pinning lots of small buffer objects, such as cursors or sprites, to video
memory can lead to fragmentation, which is a problem for devices with only
a small amount of memory. As a result, framebuffer images might not get
pinned, even though there's enough space available overall.
The flag DRM_GEM_VRAM_PL_FLAG_TOPDOWN marks buffer objects to be pinned at
the high end of video memory. This leaves contiguous space available at
the memory's low end.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923172753.26593-2-tzimmermann@suse.de
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
We can use it in i915 for updating parts of unmasked registers from
within a batch. We're also adding Gen8+ versions of CS_GPR registers
(aka MI_MATH_REG in the coprocessor).
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926100635.9416-4-michal.winiarski@intel.com
Insert structure members names into their descriptions to follow
kernel-doc format.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926122158.13028-1-anna.karas@intel.com
The function intel_engine_breadcrumbs_irq() is always invoked from an interrupt
handler and for that reason it invokes (as an optimisation) only spin_lock()
for locking assuming that the interrupts are already disabled. The
function intel_engine_signal_breadcrumbs() is provided to disable
interrupts while the former function is invoked so that assumption is
also true for callers from preemptible context.
On PREEMPT_RT local_irq_disable() really disables interrupts and this
forbids to invoke spin_lock() which becomes a sleeping spinlock.
This is also problematic with `threadirqs' in conjunction with
irq_work. With force threading the interrupt handler, the handler is
invoked with disabled BH but with interrupts enabled. This is okay and
the lock itself is never acquired in IRQ context. This changes with
irq_work (signal_irq_work()) which _still_ invokes
intel_engine_breadcrumbs_irq() from IRQ context. Lockdep should see this
and complain.
Acquire the locks in intel_engine_breadcrumbs_irq() with _irqsave()
suffix and let all callers invoke intel_engine_breadcrumbs_irq()
directly instead using intel_engine_signal_breadcrumbs().
Reported-by: Clark Williams <williams@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926105644.16703-2-bigeasy@linutronix.de
The lockdep_assert_irqs_disabled() check is needless. The previous
lockdep_assert_held() check ensures that the lock is acquired and while
the lock is acquired lockdep also prints a warning if the interrupts are
not disabled if they have to be.
These IRQ-off asserts trigger on PREEMPT_RT because the locks become
sleeping locks and do not really disable interrupts.
Remove lockdep_assert_irqs_disabled().
Reported-by: Clark Williams <williams@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926105644.16703-3-bigeasy@linutronix.de
Default length value of MI_LOAD_REGISTER_REG is 1.
Also move it out of cmd-parser-only registers since we're going to use
it in i915.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926133142.2838-3-chris@chris-wilson.co.uk
Some of our commands (MI_FLUSH_DW / PIPE_CONTROL) require a post-sync write
operation to be performed. Currently we're using dedicated VMA for
PIPE_CONTROL and global HWSP for MI_FLUSH_DW.
On execlists platforms, each of our contexts has an area that can be
used as scratch space. Let's use that instead.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926133142.2838-2-chris@chris-wilson.co.uk
We're currently using scratch presence as a way of identifying that we
entered wedged state at driver initialization time.
Let's use a separate flag rather than rely on scratch.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926133142.2838-1-chris@chris-wilson.co.uk
According to the bspec, GLK/CNL have a smaller small joiner RAM buffer
than ICL+. This feels like something that could easily change again on
future platforms, so let's just add a function to return the proper
per-platform buffer size. That may also slightly simplify the upcoming
bigjoiner enabling.
Since we have to change intel_dp_dsc_get_output_bpp()'s signature to
pass the dev_priv down for the platform check, let's take the
opportunity to also make that function static since it isn't used
outside the intel_dp file.
v2: Minor rebase on top of Maarten's changes.
Bspec: 20388
Bspec: 49259
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925234542.24289-1-matthew.d.roper@intel.com
Adds system power management support in KMS kernel driver.
Depends on:
https://patchwork.freedesktop.org/series/62377/
Changes since v1:
Since we have unified mclk/pclk/pipeline->aclk to one mclk, which will
be turned on/off when crtc atomic enable/disable, removed runtime power
management.
Removes run time get/put related flow.
Adds to disable the aclk when register access finished.
Changes since v2:
Rebases to the drm-misc-next branch.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923015908.26627-1-lowry.li@arm.com
drm-fixes-5.4-2019-09-25:
amdgpu:
- Fix a 64 bit divide
- Prevent a memory leak in a failure case in dc
- Load proper gfx firmware on navi14 variants
drm-fixes-5.4-2019-09-19:
amdgpu:
- Add more navi12 and navi14 PCI ids
- Misc fixes for renoir
- Fix bandwidth issues with multiple displays on vega20
- Support for Dali
- Fix a possible oops with KFD on hawaii
- Fix for backlight level after resume on some APUs
- Other misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925213500.3490-1-alexander.deucher@amd.com
This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.
In radeon_gem_userptr_ioctl() an MMU notifier is set up with a (tagged)
userspace pointer. The untagged address should be used so that MMU
notifiers for the untagged address get correctly matched up with the right
BO. This funcation also calls radeon_ttm_tt_pin_userptr(), which uses
provided user pointers for vma lookups, which can only by done with
untagged pointers.
This patch untags user pointers in radeon_gem_userptr_ioctl().
Link: http://lkml.kernel.org/r/c856babeb67195b35603b8d5ba386a2819cec5ff.1563904656.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.
In amdgpu_gem_userptr_ioctl() and amdgpu_amdkfd_gpuvm.c/init_user_pages()
an MMU notifier is set up with a (tagged) userspace pointer. The untagged
address should be used so that MMU notifiers for the untagged address get
correctly matched up with the right BO. This patch untag user pointers in
amdgpu_gem_userptr_ioctl() for the GEM case and in amdgpu_amdkfd_gpuvm_
alloc_memory_of_gpu() for the KFD case. This also makes sure that an
untagged pointer is passed to amdgpu_ttm_tt_get_user_pages(), which uses
it for vma lookups.
Link: http://lkml.kernel.org/r/d684e1df08f2ecb6bc292e222b64fa9efbc26e69.1563904656.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It looks like one of the topology manager mutexes may have been renamed
during a rebase, but the destruction function wasn't updated with the
new name:
error: ‘struct drm_dp_mst_topology_mgr’ has no member named
‘delayed_destroy_lock’
Fixes: 50094b5dcd ("drm/dp_mst: Destroy topology_mgr mutexes")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925224617.24027-1-matthew.d.roper@intel.com
The memory type values have changed in TGL, so we need to translate them
differently than ICL. While we're moving it, fix up the ICL translation
for LPDDR4.
BSpec: 53998
v2: Fix up ICL LPDDR4 entry (Ville); Drop unused values from TGL (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924222829.13142-1-james.ausmus@intel.com
- Some cleanups and fixes in the self-refresh helpers
- Some cleanups and fixes in the atomic helpers
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXYjuIAAKCRDj7w1vZxhR
xfNKAP9dlMLleLnjvAnCpI/Q2YZAktGCC9mIvqSzXJz52mwXNQEA5avYLerwa2+J
P5xmO7mr2/9gzeeeWE1xaufQwZnYrwY=
=Z99W
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2019-09-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Multiple panfrost fixes for regulator support and page fault handling
- Some cleanups and fixes in the self-refresh helpers
- Some cleanups and fixes in the atomic helpers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923160946.nvaqiw5j7fpcdhc7@gilmour
The names for these functions are rather confusing. drm_dp_add_port()
sounds like a function that would simply create a port and add it to a
topology, and do nothing more. Similarly, drm_dp_update_port() would be
assumed to be the function that should be used to update port
information after initial creation.
While those assumptions are currently correct in how these functions are
used, a quick glance at drm_dp_add_port() reveals that drm_dp_add_port()
can also update the information on a port, and seems explicitly designed
to do so. This can be explained pretty simply by the fact that there's
more situations that would involve updating the port information based
on a link address response as opposed to a connection status
notification than the driver's initial topology probe. Case in point:
reprobing link addresses after suspend/resume.
Since we're about to start using drm_dp_add_port() differently for
suspend/resume reprobing, let's rename both functions to clarify what
they actually do.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-18-lyude@redhat.com
Turns out we've been forgetting for a while now to actually destroy any
of the mutexes that we create in drm_dp_mst_topology_mgr. So, let's do
that.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-15-lyude@redhat.com
In dcn*_create_resource_pool the allocated memory should be released if
construct pool fails.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TGL added 2 more TC ports that currently are not being handled by
icl_pll_to_ddi_clk_sel(), so adding those.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924210040.142075-6-jose.souza@intel.com
Extending ICL mg calculations to also support dkl calculations.
v3:
Fixing iref_trim calculation for 38400 refclock
BSpec: 49204
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924210040.142075-5-jose.souza@intel.com
The final save operation into pll_state of the calculations done will
be different for DKL PHY. Prepare for that by reindenting code so it's
easier to check for correctness. This one has no change in behavior.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924210040.142075-4-jose.souza@intel.com
Add a new function to write to dkl phy pll registers. As per the
bspec all the registers are read modify write.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924210040.142075-2-jose.souza@intel.com
The disable function can be the same as for MG phy since the same
registers are used. The others are different as registers changed,
also adding a empty dkl_pll_write() to be implemented later.
v2:
Setting the right HIP_INDEX_REG bits (José)
v3:
Masking non-computed registers of mg_pll_tdc_coldst_bias
when getting hardware state
Sharing mg_pll_enable() with TGL
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924210040.142075-1-jose.souza@intel.com
Having decided that we only care about the promotion predicate, we can
simplify gen12_csb_parse to simply check whether we need to jump to a
new queue.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925130845.17952-1-chris@chris-wilson.co.uk
We cannot switch between HQ and normal mode on GLK+, so only
add planes on platforms where it makes sense.
We could probably restrict it even more to only add when scaler
users toggles between 1 and 2, but lets just leave it for now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920114235.22411-9-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
We had this as an optimization to not do a plane update, but we killed
it off because there are so many reasons we may have to do a plane
update or fastset that it's best to just assume everything changed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920114235.22411-6-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
There was a integer wraparound when mode_clock became too high,
and we didn't correct for the FEC overhead factor when dividing,
with the calculations breaking at HBR3.
As a result our calculated bpp was way too high, and the link width
limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just
in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%,
all the calculations use 1/0.972261, and the same ratio should be
applied to data M/N as well, so use it there when FEC is enabled.
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Changes since v3:
- Remove bogus fec_to_mode_clock. (Ville)
Changes since v4:
- Use the correct register for icl. (Ville)
- Split hw readout to a separate patch.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: d9218c8f6c ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
Cc: <stable@vger.kernel.org> # v5.0+
Cc: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925082110.17439-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Simplify this function implementation by using a known wrapper function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0d7b7d7-3e89-8b3f-04ed-0b14806e66f7@web.de
Pull i2c updates from Wolfram Sang:
- new driver for ICY, an Amiga Zorro card :)
- axxia driver gained slave mode support, NXP driver gained ACPI
- the slave EEPROM backend gained 16 bit address support
- and lots of regular driver updates and reworks
* 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: tegra: Move suspend handling to NOIRQ phase
i2c: imx: ACPI support for NXP i2c controller
i2c: uniphier(-f): remove all dev_dbg()
i2c: uniphier(-f): use devm_platform_ioremap_resource()
i2c: slave-eeprom: Add comment about address handling
i2c: exynos5: Remove IRQF_ONESHOT
i2c: stm32f7: Make structure stm32f7_i2c_algo constant
i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe
i2c-eeprom_slave: Add support for more eeprom models
i2c: fsi: Add of_put_node() before break
i2c: synquacer: Make synquacer_i2c_ops constant
i2c: hix5hd2: Remove IRQF_ONESHOT
i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond
watchdog: iTCO: Add support for Cannon Lake PCH iTCO
i2c: iproc: Make bcm_iproc_i2c_quirks constant
i2c: iproc: Add full name of devicetree node to adapter name
i2c: piix4: Add ACPI support
i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h
i2c: ocores: use request_any_context_irq() to register IRQ handler
i2c: designware: Fix optional reset error handling
...
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in fc1d8e7cca ("mm:
introduce put_user_page*(), placeholder versions").
Also reverse the order of a comparison, in order to placate checkpatch.pl.
Link: http://lkml.kernel.org/r/20190724044537.10458-3-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we disable rps, it appears the Tigerlake is stable enough to run
multiple engines simultaneously in CI. As disabling rps should only
cause the execution to be slow, whereas many features depend on the
different engines, we would prefer to have the engines enabled while the
machine hangs are being debugged.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111714
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924173501.21956-1-chris@chris-wilson.co.uk
load different cp firmware according to the DID and RID
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's apparently needed in some configurations.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the offset for PIPE D cursor control register is missing in
i915_reg.h due to which the cursor plane cannot be enabled for Pipe D.
This also causes kernel Warning, when a user requests to enable cursor
plane for PIPE D for Gen 12 platforms.
This patch adds the CURSOR_CTL_D register in the i915_reg.h.
v2: Rebase
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111640
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Lucas: remove extra blank line]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1569310312-12313-1-git-send-email-ankit.k.nautiyal@intel.com
Before we submit the first context to HW, we need to construct a valid
image of the register state. This layout is defined by the HW and should
match the layout generated by HW when it saves the context image.
Asserting that this should be equivalent should help avoid any undefined
behaviour and verify that we haven't missed anything important!
Of course, having insisted that the initial register state within the
LRC should match that returned by HW, we need to ensure that it does.
v2: Drop the RELATIVE_MMIO flag from gen11, we ignore it for
constructing the lrc image.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924145950.3011-1-chris@chris-wilson.co.uk
Added bandwidth calculation algorithm and checks,
similar way as it was done for ICL, some constants
were corrected according to BSpec 53998.
v2: Start using same icl_get_bw_info function to avoid
code duplication. Moved mpagesize to memory info
related structure as it is now dependent on memory type.
Fixed qi.t_bl field assignment.
v3: Removed mpagesize as unused. Duplicate code and redundant blankline
fixed.
v4: Changed ordering of IS_GEN checks as agreed. Minor commit
message fixes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111600
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920083754.5920-1-stanislav.lisovskiy@intel.com
Since dropping the set-to-gtt-domain in commit a679f58d05 ("drm/i915:
Flush pages on acquisition"), we no longer mark the contents as dirty on
a write fault. This has the issue of us then not marking the pages as
dirty on releasing the buffer, which means the contents are not written
out to the swap device (should we ever pick that buffer as a victim).
Notably, this is visible in the dumb buffer interface used for cursors.
Having updated the cursor contents via mmap, and swapped away, if the
shrinker should evict the old cursor, upon next reuse, the cursor would
be invisible.
E.g. echo 80 > /proc/sys/kernel/sysrq ; echo f > /proc/sysrq-trigger
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111541
Fixes: a679f58d05 ("drm/i915: Flush pages on acquisition")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920121821.7223-1-chris@chris-wilson.co.uk
There is little reason for the from/to logic, printing a subset of
the bits can be done by simply shifting/masking value if needed.
Also use for_each_set_bit().
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Link: http://patchwork.freedesktop.org/patch/msgid/20190923065814.4797-1-kraxel@redhat.com
Force bonded requests to run on distinct engines so that they cannot be
shuffled onto the same engine where timeslicing will reverse the order.
A bonded request will often wait on a semaphore signaled by its master,
creating an implicit dependency -- if we ignore that implicit dependency
and allow the bonded request to run on the same engine and before its
master, we will cause a GPU hang. [Whether it will hang the GPU is
debatable, we should keep on timeslicing and each timeslice should be
"accidentally" counted as forward progress, in which case it should run
but at one-half to one-third speed.]
We can prevent this inversion by restricting which engines we allow
ourselves to jump to upon preemption, i.e. baking in the arrangement
established at first execution. (We should also consider capturing the
implicit dependency using i915_sched_add_dependency(), but first we need
to think about the constraints that requires on the execution/retirement
ordering.)
Fixes: 8ee36e048c ("drm/i915/execlists: Minimalistic timeslicing")
References: ee1136908e ("drm/i915/execlists: Virtual engine bonding")
Testcase: igt/gem_exec_balancer/bonded-slice
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-3-chris@chris-wilson.co.uk
Due to the nature of preempt-to-busy the execlists active tracking and
the schedule queue may become temporarily desync'ed (between resubmission
to HW and its ack from HW). This means that we may have unwound a
request and passed it back to the virtual engine, but it is still
inflight on the HW and may even result in a GPU hang. If we detect that
GPU hang and try to reset, the hanging request->engine will no longer
match the current engine, which means that the request is not on the
execlists active list and we should not try to find an older incomplete
request. Given that we have deduced this must be a request on a virtual
engine, it is the single active request in the context and so must be
guilty (as the context is still inflight, it is prevented from being
executed on another engine as we process the reset).
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-2-chris@chris-wilson.co.uk
As preempt-to-busy leaves the request on the HW as the resubmission is
processed, that request may complete in the background and even cause a
second virtual request to enter queue. This second virtual request
breaks our "single request in the virtual pipeline" assumptions.
Furthermore, as the virtual request may be completed and retired, we
lose the reference the virtual engine assumes is held. Normally, just
removing the request from the scheduler queue removes it from the
engine, but the virtual engine keeps track of its singleton request via
its ve->request. This pointer needs protecting with a reference.
v2: Drop unnecessary motion of rq->engine = owner
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-1-chris@chris-wilson.co.uk
Adding a enable parameters allow us to share most of the code between
enable and disable functions.
v3:
Renamed icl_phy_clock_gating() to icl_phy_set_clock_gating()
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-6-jose.souza@intel.com
These are the registers needed to program Dekel phy. Some register
definitions will be reused from MG PHY definitions, so adding a
comment on those.
Bspec: 49295
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-5-jose.souza@intel.com
Commit 24a7bfe0c2 ("drm/i915: Keep the TypeC port mode fixed when the
port is active") added this new hook while in parallel TGL upstream was
happening and this was missed.
Without this driver will crash when TC DDI is added and driver is
preparing to do a full modeset.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-4-jose.souza@intel.com
If platform supports and has modular FIA is enabled, the registers
bits also change, example: reading TC3 registers with modular FIA
enabled, driver should read from FIA2 but with TC1 bits offsets.
It is described in BSpec 50231 for DFLEXDPSP, other registers don't
have the BSpec description but testing in real hardware have proven
that it had moved for all other registers too.
v2:
- Caching index in tc_phy_fia_idx, instead of calculate it each time
v3:
- Setting tc_phy_fia and tc_phy_fia_idx in the same function
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-3-jose.souza@intel.com
Step 4.b was complete missed because it is only required to TC and TBT.
Bspec: 49190
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-2-jose.souza@intel.com
Pull setting -EIO on the hung requests into its own utility function.
Having allowed ourselves to short-circuit submission of completed
requests, we can now do the mark_eio() prior to submission and avoid
some redundant operations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-4-chris@chris-wilson.co.uk
If we are asked to submit a completed request, just move it onto the
active-list without modifying it's payload. If we try to emit the
modified payload of a completed request, we risk racing with the
ring->head update during retirement which may advance the head past our
breadcrumb and so we generate a warning for the emission being behind
the RING_HEAD.
v2: Commentary for the sneaky, shared responsibility between functions.
v3: Spelling mistakes and bonus assertion
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-3-chris@chris-wilson.co.uk
Since amalgamating the queued and active lists in commit 422d7df4f0
("drm/i915: Replace engine->timeline with a plain list"), performing a
i915_request_submit() will remove the request from the execlists
priority queue.
References: 422d7df4f0 ("drm/i915: Replace engine->timeline with a plain list")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-2-chris@chris-wilson.co.uk
A gpu hang can occur at any time, given a sufficiently angry gpu. An
example is when it forgets to perform a context-switch at the end of a
request, leaving us with a hanging GPU on a completed request. Here, we
may retire the request, only leaving its context alive via the active
barrier. When we reset the GPU on a completed request, we do not modify
its context image (just updating the ring state) and can safely defer
the assertion that we have the image pinned and ready to modify.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111639
Fixes: dffa8feb30 ("drm/i915/perf: Assert locking for i915_init_oa_perf_state()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-1-chris@chris-wilson.co.uk
The i915 specific mode config init code is too specific and detailed to
have open in a high level function. Abstract away. No functional
changes.
v2: nest drm_mode_config_init() in the function too (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-5-jani.nikula@intel.com
The code is too specific and detailed to have open in a high level
function. Abstract away. As a drive-by improvement switch to using
enableddisabled() in logging and git rid of a redundant !!. No
functional changes.
v2: drop the !! while at it too (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-4-jani.nikula@intel.com
In general, prefer struct drm_i915_private * over struct drm_device *
when either will do. Rename the local variable to i915. Also propagate
to intel_hpd_poll_fini(). No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-3-jani.nikula@intel.com
When audio power domain is suspended, the display driver must
save state of AUD_FREQ_CNTRL on Tiger Lake and Ice Lake
systems. The initial value of the register is set by BIOS and
is read by driver during the audio component init sequence.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920083918.27057-1-kai.vehmanen@linux.intel.com
During it signals the completion of a writeback job, after releasing
the out_fence, we'd clear the pointer.
Check if fence left over in drm_writeback_cleanup_job(), release it.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1564571048-15029-3-git-send-email-lowry.li@arm.com
Adds the check if the writeback_job with an empty fb, then it should
be freed in atomic_check phase.
With this change, the driver users will not check empty fb case any more.
So refined accordingly.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1564571048-15029-2-git-send-email-lowry.li@arm.com
Added docbook info regarding Display State Buffer(DSB) which
is added from gen12 onwards to batch submit display HW programming.
v1: Initial version as RFC.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-11-animesh.manna@intel.com
Gamma lut programming can be programmed using DSB
where bulk register programming can be done using indexed
register write which takes number of data and the mmio offset
to be written.
Currently enabled for 12-bit gamma LUT which is enabled by
default and later 8-bit/10-bit will be enabled in future
based on need.
v1: Initial version.
v2: Directly call dsb-api at callsites. (Jani)
v3:
- modified the code as per single dsb instance per crtc. (Shashank)
- Added dsb get/put call in platform specific load_lut hook. (Jani)
- removed dsb pointer from dev_priv. (Jani)
v4: simplified code by dropping ref-count implementation. (Shashank)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-9-animesh.manna@intel.com
Batch buffer will be created through dsb-reg-write function which can have
single/multiple request based on usecase and once the buffer is ready
commit function will trigger the execution of the batch buffer. All
the registers will be updated simultaneously.
v1: Initial version.
v2: Optimized code few places. (Chris)
v3: USed DRM_ERROR for dsb head/tail programming failure. (Shashank)
v4: reset ins_start_offset after commit. (Jani)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-8-animesh.manna@intel.com
DSB will be used for performance improvement for some special scenario.
DSB engine will be enabled based on need and after completion of its work
will be disabled. Api added for enable/disable operation by using DSB_CTRL
register.
v1: Initial version.
v2: POSTING_READ added after writing control register. (Shashank)
v3: cosmetic changes done. (Shashank)
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-7-animesh.manna@intel.com
As per bspec check for DSB status before programming any
of its register. Inline function added to check the dsb status.
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-6-animesh.manna@intel.com
DSB can program large set of data through indexed register write
(opcode 0x9) in one shot. DSB feature can be used for bulk register
programming e.g. gamma lut programming, HDR meta data programming.
v1: initial version.
v2: simplified code by using ALIGN(). (Chris)
v3: ascii table added as code comment. (Shashank)
v4: cosmetic changes done. (Shashank)
v5: reset ins_start_offset. (Jani)
v6: update ins_start_offset in inel_dsb_reg_write.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-5-animesh.manna@intel.com
DSB support single register write through opcode 0x1. Generic
api created which accumulate all single register write in a batch
buffer and once DSB is triggered, it will program all the registers
at the same time.
v1: Initial version.
v2: Unused macro removed and cosmetic changes done. (Shashank)
v3: set free_pos to zero in dsb-put() instead dsb-get() and
a cosmetic change. (Shashank)
v4: macro of indexed-write is moved. (Shashank)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-4-animesh.manna@intel.com
This patch adds a function, which will internally get the gem buffer
for DSB engine. The GEM buffer is from global GTT, and is mapped into
CPU domain, contains the data + opcode to be feed to DSB engine.
v1: Initial version.
v2:
- removed some unwanted code. (Chris)
- Used i915_gem_object_create_internal instead of _shmem. (Chris)
- cmd_buf_tail removed and can be derived through vma object. (Chris)
v3: vma realeased if i915_gem_object_pin_map() failed. (Shashank)
v4: for simplification and based on current usage added single dsb
object in intel_crtc. (Shashank)
v5: seting NULL to cmd_buf moved outside of mutex in dsb-put(). (Shashank)
v6:
- refcount machanism added.
- Used atomic_add_return and atomic_dec_and_test instead of
atomic_inc and atomic_dec. (Jani)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
[Jani: added #include <linux/types.h> while pushing]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-3-animesh.manna@intel.com
Display State Buffer(DSB) is a new hardware capability, introduced
in GEN12 display. DSB allows a driver to batch-program display HW
registers.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-2-animesh.manna@intel.com
For icl+, have hw read out to create hw blob of gamma
lut values. icl+ platforms supports multi segmented gamma
mode by default, add hw lut creation for this mode.
This will be used to validate gamma programming using dsb
(display state buffer) which is a tgl specific feature.
Major change done-removal of readouts of coarse and fine segments
because PAL_PREC_DATA register isn't giving propoer values.
State checker limited only to "fine segment"
v2: -readout code for multisegmented gamma has to come
up with some intermediate entries that aren't preserved
in hardware (Jani N)
-linear interpolation (Ville)
-moved common code to check gamma_enable to specific funcs,
since icl doesn't support that
v3: -use u16 instead of __u16 [Jani N]
-used single lut [Jani N]
-improved and more readable for loops [Jani N]
-read values directly to actual locations and then fill gaps [Jani N]
-moved cleaning to patch 1 [Jani N]
-renamed icl_read_lut_multi_seg() to icl_read_lut_multi_segment to
make it similar to icl_load_luts()
-renamed icl_compute_interpolated_gamma_blob() to
icl_compute_interpolated_gamma_lut_values() more sensible, I guess
v4: -removed interpolated func for creating gamma lut values
-removed readouts of fine and coarse segments, failure to read PAL_PREC_DATA
correctly
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1569096654-24433-3-git-send-email-swati2.sharma@intel.com
The "lvds->backlight" pointer could be NULL in situations where
of_parse_phandle() returns NULL. This code is cleaner if we use the
managed devm_of_find_backlight() so the clean up is automatic.
Fixes: 7c9dff5bd6 ("drm: panels: Add LVDS panel driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911104928.GA15930@mwanda
This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a cleanup
to the page walker API and a few memremap related changes round out the
series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and
make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of drivers by
using a refcount get/put attachment idiom and remove the convoluted
mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its only
user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without providing
a struct device
- Make walk_page_range() and related use a constant structure for function
pointers
-----BEGIN PGP SIGNATURE-----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=FRGg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a
cleanup to the page walker API and a few memremap related changes
round out the series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE,
and make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of
drivers by using a refcount get/put attachment idiom and remove the
convoluted mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its
only user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without
providing a struct device
- Make walk_page_range() and related use a constant structure for
function pointers"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits)
libnvdimm: Enable unit test infrastructure compile checks
mm, notifier: Catch sleeping/blocking for !blockable
kernel.h: Add non_block_start/end()
drm/radeon: guard against calling an unpaired radeon_mn_unregister()
csky: add missing brackets in a macro for tlb.h
pagewalk: use lockdep_assert_held for locking validation
pagewalk: separate function pointers from iterator data
mm: split out a new pagewalk.h header from mm.h
mm/mmu_notifiers: annotate with might_sleep()
mm/mmu_notifiers: prime lockdep
mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
mm/hmm: hmm_range_fault() infinite loop
mm/hmm: hmm_range_fault() NULL pointer bug
mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
mm/mmu_notifiers: remove unregister_no_release
RDMA/odp: remove ib_ucontext from ib_umem
RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
...
Gen12 has dual-subslices (DSS), which compared to gen11 subslices have
some duplicated resources/paths. Although DSS behave similarly to 2
subslices, instead of splitting this and presenting userspace with bits
not directly representative of hardware resources, present userspace
with a subslice_mask made up of DSS bits instead.
v2: GEM_BUG_ON on mask size (Lionel)
Bspec: 29547
Bspec: 12247
Cc: Kelvin Gardiner <kelvin.gardiner@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
CC: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com> #v1
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913075137.18476-2-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
On ILK-IVB the pipe colorspace is configured via PIPECONF
(as opposed to PIPEMISC in BDW+). Let's configure+readout
that stuff correctly.
Enabling YCbCr 4:4:4 output will now be a simple matter of
setting crtc_state->output_format appropriately in the encoder
.compute_config(). However, when we do that we must be
aware of the fact that YCbCr DP output doesn't seem to work
on ILK (resulting image is totally garbled), but on SNB+
it works fine. However HDMI YCbCr output does work correctly
even on ILK.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-13-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Prepare the pipe csc for YCbCr output on ilk/snb. The main difference
to IVB+ is the lack of explicit post offsets, and instead we must
configure the CSC info RGB->YUV mode (which takes care of offsetting
Cb/Cr properly) and enable the "black screen offset" bit to add the
required offset to Y.
And while at it throw some comments around the bit defines to
document which platforms have which bits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-12-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
On HSW the pipe colorspace is configured via PIPECONF
(as opposed to PIPEMISC in BDW+). Let's configure+readout
that stuff correctly.
Enabling YCbCr 4:4:4 output will now be a simple matter of
setting crtc_state->output_format appropriately in the encoder
.compute_config().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-10-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Make intel_get_crtc_ycbcr_config() simpler and rename it
to bdw_get_pipemisc_output_format() to better reflect what
it does.
Also toss in some comments to document that the 4:2:0 PIPECONF
bits are glk+ only. They are mbz on earlier platforms so reading
them unconditionally is safe however.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-9-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Since HSW the PIPECONF progressive vs. interlaced selection is done
with just two bits instead of the earlier three. Let's not look at the
extra bit on HSW+. Also gen2 doesn't support interlaced displays at all.
This is actually fine as is currently because the extra bit is mbz (as
are all three bits on gen2). But just to avoid mishaps in the future
if the bits get reused let's only look at what's properly defined.
v2: constify crtc_state
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-8-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
crtc_state->limited_color_range only applies to RGB output but
we're currently setting it even for YCbCr output. That will
lead to conflicting MSA and PIPECONF settings which can mess
up the image. Let's make sure limited_color_range stays unset
with YCbCr output.
Also WARN if we end up with such a bogus combination when
programming the MSA MISC bits as it's impossible to even
indicate quantization rangle for YCbCr via MSA MISC. YCbCr
output is simply assumed to be limited range always. Note
that VSC SDP does provide a mechanism for full range YCbCr,
so in the future we may want to rethink how we compute/store
this state.
And for good measure we add the same WARN to the HDMI path.
v2: s/==/!=/ in the HDMI WARN
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718164523.11738-1-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
We're configuring the AVI infoframe quantization range bits as if
we're always transmitting RGB pixels. Let's fix this so that we
correctly indicate limited range YCC quantization range when
transmitting YCbCr instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-4-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Looks like we're currently setting the MSA to xvYCC BT.709 instead
of the YCbCr BT.601 claimed by the comment. But even that comment
is wrong since we configure the CSC matrix to BT.709.
Let's remove the bogus statement from the comment and fix the
MSA to indicate YCbCr BT.709 so that it matches the actual
pixel data we're transmitting.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-3-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Make both GuC and HuC to use "." as the separator. Hardcode
the separator in MAKE_UC_FW_PATH. Remove the usage of "ver" from HuC.
The current convention being:
<platform>_<g/h>uc_<major>.<minor>.patch.bin
Update the versions of HuC being loaded of the platforms.
SKL - v2.0.0
BXT - v2.0.0
KBL - v4.0.0
GLK - v4.0.0
CFL - KBL v4.0.0
ICL - v9.0.0
CML - v4.0.0
v2: Remove the separator parameter altogether from
__MAKE_UC_FW_PATH.(Daniele)
- Squash all firmware update patches (Daniele)
v3: s/huc/HuC
- Correct the order of platforms
- Change REVID of cml to 5(Michal)
- Code space changes in huc_def (Daniele)
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919201204.9691-1-daniele.ceraolospurio@intel.com
Because between HDMI and DP have different colorspaces, it adds
drm_mode_create_dp_colorspace_property() function for creating of DP
colorspace property.
v3: Addressed review comments from Ville
- Add new colorimetry options for DP 1.4a spec.
- Separate set of colorimetry enum values for DP.
v4: Add additional comments to struct drm_prop_enum_list.
Polishing an enum string of struct drm_prop_enum_list
v5: Change definitions of DRM_MODE_COLORIMETRYs to follow HDMI prefix and
DP abbreviations.
Add missed variables on dp_colorspaces.
Fix typo. [Uma]
v6: Addressed review comments from Ilia and Ville
- Split drm_mode_create_colorspace_property() to DP and HDMI connector.
v7: Fix typo [Jani Saarinen]
Fix white space.
v8: Addressed review comments from Ville
- Drop colorimetries which have another way to distinguish or which
would not be used.
v9: Addressed review comments from Ville
- Split hunk into renaming and adding of code.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-5-gwan-gyeong.mun@intel.com
As between HDMI and DP have different colorspaces, in order to distinguish
colorspace of DP and HDMI, it renames drm_mode_create_colorspace_property()
function to drm_mode_create_hdmi_colorspace_property() function for HDMI
connector.
In order to apply changed drm api, i915 driver has channged.
It addresses review comments from Ville.
- Split hunk into renaming and adding of code.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-4-gwan-gyeong.mun@intel.com
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build
in unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=VGqV
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build in
unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
* tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits)
genksyms: convert to SPDX License Identifier for lex.l and parse.y
modpost: use __section in the output to *.mod.c
modpost: use MODULE_INFO() for __module_depends
export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
export.h: remove defined(__KERNEL__), which is no longer needed
kbuild: allow Clang to find unused static inline functions for W=1 build
kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
kbuild: refactor scripts/Makefile.extrawarn
merge_config.sh: ignore unwanted grep errors
kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
modpost: add NOFAIL to strndup
modpost: add guid_t type definition
kbuild: add $(BASH) to run scripts with bash-extension
kbuild: remove ARCH_{CPP,A,C}FLAGS
kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
kbuild: Do not enable -Wimplicit-fallthrough for clang for now
kbuild: clean up subdir-ymn calculation in Makefile.clean
kbuild: remove unneeded '+' marker from cmd_clean
kbuild: remove clean-dirs syntax
kbuild: check clean srctree even earlier
...
Our sanitychecks indicate that while this register is context
saved/restore, the HW does not preserve this bit within the register --
it likely doesn't exist, or one of those mythical bits that the
architects insist does something despite all appearances to the
contrary.
For reference, SAMPLER_MODE is already in i915_reg.h as
GEN10_SAMPLER_MODE and is being setup in icl_ctx_workarounds_init() as
opposed to the chosen location here of rcs_engine_wa_init).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111754
Fixes: 7f0cc34b53 ("drm/i915/tgl: Implement Wa_1406941453")
Testcase: igt/i915_selftest/live_workarounds
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920081254.18389-1-chris@chris-wilson.co.uk
As not only is the signal->timeline volatile, so will be acquiring the
timeline's HWSP. We must first carefully acquire the timeline from the
signaling request and then lock the timeline. With the removal of the
struct_mutex serialisation of request construction, we can have multiple
timelines active at once, and so we must avoid using the nested mutex
lock as it is quite possible for both timelines to be establishing
semaphores on the other and so deadlock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919111912.21631-3-chris@chris-wilson.co.uk
As we need to take a walk back along the signaler timeline to find the
fence before upon which we want to wait, we need to lock that timeline
to prevent it being modified as we walk. Similarly, we also need to
acquire a reference to the earlier fence while it still exists!
Though we lack the correct locking today, we are saved by the
overarching struct_mutex -- but that protection is being removed.
v2: Tvrtko made me realise I was being lax and using annotations to
ignore the AB-BA deadlock from the timeline overlap. As it would be
possible to construct a second request that was using a semaphore from the
same timeline as ourselves, we could quite easily end up in a situation
where we deadlocked in our mutex waits. Avoid that by using a trylock
and falling back to a normal dma-fence await if contended.
v3: Eek, the signal->timeline is volatile and must be carefully
dereferenced to ensure it is valid.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919111912.21631-2-chris@chris-wilson.co.uk
The request->timeline is only valid until the request is retired (i.e.
before it is completed). Upon retiring the request, the context may be
unpinned and freed, and along with it the timeline may be freed. We
therefore need to be very careful when chasing rq->timeline that the
pointer does not disappear beneath us. The vast majority of users are in
a protected context, either during request construction or retirement,
where the timeline->mutex is held and the timeline cannot disappear. It
is those few off the beaten path (where we access a second timeline) that
need extra scrutiny -- to be added in the next patch after first adding
the warnings about dangerous access.
One complication, where we cannot use the timeline->mutex itself, is
during request submission onto hardware (under spinlocks). Here, we want
to check on the timeline to finalize the breadcrumb, and so we need to
impose a second rule to ensure that the request->timeline is indeed
valid. As we are submitting the request, it's context and timeline must
be pinned, as it will be used by the hardware. Since it is pinned, we
know the request->timeline must still be valid, and we cannot submit the
idle barrier until after we release the engine->active.lock, ergo while
submitting and holding that spinlock, a second thread cannot release the
timeline.
v2: Don't be lazy inside selftests; hold the timeline->mutex for as long
as we need it, and tidy up acquiring the timeline with a bit of
refactoring (i915_active_add_request)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919111912.21631-1-chris@chris-wilson.co.uk
Before we execute a batch, we must first issue any and all TLB
invalidations so that batch picks up the new page table entries.
Tigerlake's preparser is weakening our post-sync CS_STALL inside the
invalidate pipe-control and allowing the loading of the batch buffer
before we have setup its page table (and so it loads the wrong page and
executes indefinitely).
The igt_cs_tlb indicates that this issue can only be observed on rcs,
even though the preparser is common to all engines. Alternatively, we
could do TLB shootdown via mmio on updating the GTT.
By inserting the pre-parser disable inside EMIT_INVALIDATE, we will also
accidentally fixup execution that writes into subsequent batches, such
as gem_exec_whisper and even relocations performed on the GPU. We should
be careful not to allow this disable to become baked into the uABI! The
issue is that if userspace relies on our disabling of the HW
optimisation, when we are ready to enable that optimisation, userspace
will then be broken...
Testcase: igt/i915_selftests/live_gtt/igt_cs_tlb
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111753
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919151811.9526-1-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----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=5CRH
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main pull request for 5.4-rc1 merge window. I don't think
there is anything outstanding so next week should just be fixes, but
we'll see if I missed anything. I landed some fixes earlier in the
week but got delayed writing summary and sending it out, due to a mix
of sick kid and jetlag!
There are some fixes pending, but I'd rather get the main merge out of
the way instead of delaying it longer.
It's also pretty large in commit count and new amd header file size.
The largest thing is four new amdgpu products (navi12/14, arcturus and
renoir APU support).
Otherwise it's pretty much lots of work across the board, i915 has
started landing tigerlake support, lots of icelake fixes and lots of
locking reworking for future gpu support, lots of header file rework
(drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been
put into the places they are needed.
uapi:
- content protection type property for HDCP
core:
- rework include dependencies
- lots of drmP.h removals
- link rate calculation robustness fix
- make fb helper map only when required
- add connector->DDC adapter link
- DRM_WAIT_ON removed
- drop DRM_AUTH usage from drivers
dma-buf:
- reservation object fence helper
dma-fence:
- shrink dma_fence struct
- merge signal functions
- store timestamps in dma_fence
- selftests
ttm:
- embed drm_get_object struct into ttm_buffer_object
- release_notify callback
bridges:
- sii902x - audio graph card support
- tc358767 - aux data handling rework
- ti-snd64dsi86 - debugfs support, DSI mode flags support
panels:
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe
Himax8279d, Sharp LD-D5116Z01B
- TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01,
Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1
i915:
- Initial tigerlake platform support
- Locking simplification work, general all over refactoring.
- Selftests
- HDCP debug info improvements
- DSI properties
- Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI
suspend/resume
- GuC fixes
- Perf fixes
- ElkhartLake enablement
- DP MST fixes
- GVT - command parser enhancements
amdgpu:
- add wipe memory on release flag for buffer creation
- Navi12/14 support (may be marked experimental)
- Arcturus support
- Renoir APU support
- mclk DPM for Navi
- DC display fixes
- Raven scatter/gather support
- RAS support for GFX
- Navi12 + Arcturus power features
- GPU reset for Picasso
- smu11 i2c controller support
amdkfd:
- navi12/14 support
- Arcturus support
radeon:
- kexec fix
nouveau:
- improved display color management
- detect lack of GPU power cables
vmwgfx:
- evicition priority support
- remove unused security feature
msm:
- msm8998 display support
- better async commit support for cursor updates
etnaviv:
- per-process address space support
- performance counter fixes
- softpin support
mcde:
- DCS transfers fix
exynos:
- drmP.h cleanup
lima:
- reduce logging
kirin:
- misc clenaups
komeda:
- dual-link support
- DT memory regions
hisilicon:
- misc fixes
imx:
- IPUv3 image converter fixes
- 32-bit RGB V4L2 pixel format support
ingenic:
- more support for panel related cases
mgag200:
- cursor support fix
panfrost:
- export GPU features register to userspace
- gpu heap allocations
- per-fd address space support
pl111:
- CLD pads wiring support removed from DT
rockchip:
- rework to use DRM PSR helpers
- fix bug in VOP_WIN_GET macro
- DSI DT binding rework
sun4i:
- improve support for color encoding and range
- DDC enabled GPIO
tinydrm:
- rework SPI support
- improve MIPI-DBI support
- moved to drm/tiny
vkms:
- rework CRC tracking
dw-hdmi:
- get_eld and i2s improvements
gm12u320:
- misc fixes
meson:
- global code cleanup
- vpu feature detect
omap:
- alpha/pixel blend mode properties
rcar-du:
- misc fixes"
* tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits)
drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init
drm/nouveau: Fix ordering between TTM and GEM release
drm/nouveau/prime: Extend DMA reservation object lock
drm/nouveau: Fix fallout from reservation object rework
drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors
drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap
drm/i915: to make vgpu ppgtt notificaiton as atomic operation
drm/i915: Flush the existing fence before GGTT read/write
drm/i915: Hold irq-off for the entire fake lock period
drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915
drm/i915/gvt: update vgpu workload head pointer correctly
drm/mcde: Fix DSI transfers
drm/msm: Use the correct dma_sync calls harder
drm/msm: remove unlikely() from WARN_ON() conditions
drm/msm/dsi: Fix return value check for clk_get_parent
drm/msm: add atomic traces
drm/msm/dpu: async commit support
drm/msm: async commit support
drm/msm: split power control from prepare/complete_commit
drm/msm: add kms->flush_commit()
...
- add dma-mapping and block layer helpers to take care of IOMMU
merging for mmc plus subsequent fixups (Yoshihiro Shimoda)
- rework handling of the pgprot bits for remapping (me)
- take care of the dma direct infrastructure for swiotlb-xen (me)
- improve the dma noncoherent remapping infrastructure (me)
- better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me)
- cleanup mmaping of coherent DMA allocations (me)
- various misc cleanups (Andy Shevchenko, me)
-----BEGIN PGP SIGNATURE-----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=/wGv
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add dma-mapping and block layer helpers to take care of IOMMU merging
for mmc plus subsequent fixups (Yoshihiro Shimoda)
- rework handling of the pgprot bits for remapping (me)
- take care of the dma direct infrastructure for swiotlb-xen (me)
- improve the dma noncoherent remapping infrastructure (me)
- better defaults for ->mmap, ->get_sgtable and ->get_required_mask
(me)
- cleanup mmaping of coherent DMA allocations (me)
- various misc cleanups (Andy Shevchenko, me)
* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
mmc: queue: Fix bigger segments usage
arm64: use asm-generic/dma-mapping.h
swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
swiotlb-xen: simplify cache maintainance
swiotlb-xen: use the same foreign page check everywhere
swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
xen: remove the exports for xen_{create,destroy}_contiguous_region
xen/arm: remove xen_dma_ops
xen/arm: simplify dma_cache_maint
xen/arm: use dev_is_dma_coherent
xen/arm: consolidate page-coherent.h
xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
arm: remove wrappers for the generic dma remap helpers
dma-mapping: introduce a dma_common_find_pages helper
dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
vmalloc: lift the arm flag for coherent mappings to common code
dma-mapping: provide a better default ->get_required_mask
dma-mapping: remove the dma_declare_coherent_memory export
remoteproc: don't allow modular build
...
Extends the user space ioctl for CL submissions so it can include a request
to flush the cache once the CL execution has completed. Fixes memory
write violation messages reported by the kernel in workloads involving
shader memory writes (SSBOs, shader images, scratch, etc) which sometimes
also lead to GPU resets during Piglit and CTS workloads.
v2: if v3d_job_init() fails we need to kfree() the job instead of
v3d_job_put() it (Eric Anholt).
v3 (Eric Anholt):
- Drop _FLAG suffix from the new flag name.
- Add a new param so userspace can tell whether cache flushing is
implemented in the kernel.
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919071016.4578-1-itoral@igalia.com
Fill out our list of cea modes with the new stuff from CTA-861-G.
We only do the modes with VIC < 128 here. Adding the higher
numbered VICs will need some slight code refactoring first.
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711103234.6294-2-ville.syrjala@linux.intel.com
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Allow drivers to call drm_atomic_helper_check_modeset() without
having the crtc helper funcs specified. i915 doesn't need those
anymore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
planes' max resolution. This has the nasty implication that modes on the
connectors' mode list may not be usable when the user asks for a
fullscreen plane. Seeing as that is the most common use case it seems
prudent to filter out modes that don't allow for fullscreen planes to
be enabled.
Let's do that in the connetor .mode_valid() hook so that normally
such modes are kept hidden but the user is still able to forcibly
specify such a mode if they know they don't need fullscreen planes.
This is in line with ealier policies regarding certain clock limits.
The idea is to prevent the casual user from encountering a mode that
would fail under typical conditions, but allow the expert user to
force things if they so wish.
Maybe in the future we should consider automagically using two
planes when one can't cover the entire screen? Wouldn't be a
great match for the current uapi with explicit planes though,
but I guess no worse than using two pipes (which we apparently
have to in the future anyway). Either that or we'd have to
teach userspace to do it for us.
v2: Fix icl+ max plane heigth (Manasi)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Leho Kraav <leho@kraav.com>
Cc: Sean Paul <sean@poorly.run>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190918150707.32420-1-ville.syrjala@linux.intel.com
The officially validated plane width limit is 4k on skl+, however
we already had people using 5k displays before we started to enforce
the limit. Also it seems Windows allows 5k resolutions as well
(though not sure if they do it with one plane or two).
According to hw folks 5k should work with the possible
exception of the following features:
- Ytile (already limited to 4k)
- FP16 (already limited to 4k)
- render compression (already limited to 4k)
- KVMR sprite and cursor (don't care)
- horizontal panning (need to verify this)
- pipe and plane scaling (need to verify this)
So apart from last two items on that list we are already
fine. We should really verify what happens with those last
two items but I don't have a 5k display on hand atm so it'll
have to wait.
In the meantime let's just bump the limit back up to 5k since
several users have already been using it without apparent issues.
At least we'll be no worse off than we were prior to lowering
the limits.
Cc: stable@vger.kernel.org
Cc: Sean Paul <sean@poorly.run>
Cc: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Leho Kraav <leho@kraav.com>
Fixes: 372b9ffb57 ("drm/i915: Fix skl+ max plane width")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111501
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905135044.2001-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
When handling a GPU page fault addr_to_drm_mm_node() is used to
translate the GPU address to a buffer object. However it is possible for
the buffer object to be freed after the function has returned resulting
in a use-after-free of the BO.
Change addr_to_drm_mm_node to return the panfrost_gem_object with an
extra reference on it, preventing the BO from being freed until after
the page fault has been handled.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913160310.50444-1-steven.price@arm.com
devm_regulator_get() is now used to populate pfdev->regulator which
ensures that this cannot be NULL (a dummy regulator will be returned if
necessary). So remove the checks in panfrost_devfreq_target().
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/3e3a2c8a-b4fc-8af6-39e1-b26160db2c7c@arm.com
The panfrost driver requests a supply using regulator_get_optional()
but both the name of the supply and the usage pattern suggest that it is
being used for the main power for the device and is not at all optional
for the device for function, there is no meaningful handling for absent
supplies. Such regulators should use the vanilla regulator_get()
interface, it will ensure that even if a supply is not described in the
system integration one will be provided in software.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904123032.23263-1-broonie@kernel.org
The MCC hpd table is just a subset of the ICP table; we can eliminate it
and use the ICP table everywhere. The extra pins in the table won't be
a problem for MCC since we still supply an appropriate hotplug trigger
mask anywhere the pin table is used.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190918235626.3750-2-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We generally assume future platforms will inherit the behavior of the
most recent platforms, so update our DDC pin mapping defaults to match
how ICP/TGP behave (i.e., pins starting from GMBUS_PIN_1_BXT for combo
PHY's and pins starting from GMBUS_PIN_9_TC1_ICP for TC PHY's). MCC's
non-standard handling of combo PHY C seems like a platform-specific
quirk that is unlikely to be duplicated on future platforms, so continue
handling it as a special case.
Without this change, future platforms would default to gen4-style pin
mapping which is almost certainly not what we'll want.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190918235626.3750-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Check that we are correctly invalidating the TLB at the start of a
batch after updating the GTT.
v2: Comments and hold the request reference while spinning
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919131414.7495-1-chris@chris-wilson.co.uk
Currently the self refresh idle timer is a const set by the crtc. This
is fine if the self refresh entry/exit times are well-known for all
panels used on that crtc. However panels and workloads can vary quite a
bit, and a timeout which works well for one doesn't work well for
another.
In the extreme, if the timeout is too short we could get in a situation
where the self refresh exits are taking so long we queue up a self refresh
entry before the exit commit is even finished.
This patch changes the idle timeout to a moving average of the entry
times + a moving average of exit times + the crtc constant.
This patch was tested on rockchip, with a kevin CrOS panel the idle
delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On
the same board, the bob panel idle delay lands around ~340ms (90 entry
+ 150 exit + 100 const).
WRT the dedicated mutex in self_refresh_data, it would be nice if we
could rely on drm_crtc.mutex to protect the average times, but there are
a few reasons why a separate lock is a better choice:
- We can't rely on drm_crtc.mutex being held if we're doing a nonblocking
commit
- We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us
whether the lock was already held in the acquire context (it eats
-EALREADY), so we can't tell if we should drop it or not
- We don't need such a heavy-handed lock for what we're trying to do,
commit ordering doesn't matter, so a point-of-use lock will be less
contentious
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run
Changes in v2:
- Migrate locking explanation from comment to commit msg (Daniel)
- Turf constant entry delay and multiply the avg times by 2 (Daniel)
Our assumption that the we can ask the HW to lock the SFC even if not
currently in use does not match the HW commitment. The expectation from
the HW is that SW will not try to lock the SFC if the engine is not
using it and if we do that the behavior is undefined; on ICL the HW
ends up to returning the ack and ignoring our lock request, but this is
not guaranteed and we shouldn't expect it going forward.
Also, failing to get the ack while the SFC is in use means that we can't
cleanly reset it, so fail the engine reset in that scenario.
v2: drop rmw change, keep the log as debug and handle failure (Chris),
improve comments (Tvrtko).
Reported-by: Owen Zhang <owen.zhang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919015330.15435-1-daniele.ceraolospurio@intel.com
It's the only flag anyone actually cares about. Plus if we're unlucky,
the atomic ioctl might need a different flag for async flips. So
better to abstract this away from the uapi a bit.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903190642.32588-3-daniel.vetter@ffwll.ch
It's never been wired up. Only userspace that tried to use it (and
didn't actually check whether anything works, but hey it builds) is
the -modesetting atomic implementation. And we just shut that up.
If there's anyone else then we need to silently accept this flag no
matter what, and find a new one. Because once a flag is tainted, it's
lost.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903190642.32588-2-daniel.vetter@ffwll.ch
The -modesetting ddx has a totally broken idea of how atomic works:
- doesn't disable old connectors, assuming they get auto-disable like
with the legacy setcrtc
- assumes ASYNC_FLIP is wired through for the atomic ioctl
- not a single call to TEST_ONLY
Iow the implementation is a 1:1 translation of legacy ioctls to
atomic, which is a) broken b) pointless.
We already have bugs in both i915 and amdgpu-DC where this prevents us
from enabling neat features.
If anyone ever cares about atomic in X we can easily add a new atomic
level (req->value == 2) for X to get back the shiny toys.
Since these broken versions of -modesetting have been shipping,
there's really no other way to get out of this bind.
v2:
- add an informational dmesg output (Rob, Ajax)
- reorder after the DRIVER_ATOMIC check to avoid useless noise (Ilia)
- allow req->value > 2 so that X can do another attempt at atomic in
the future
v3: Go with paranoid, insist that the X should be first (suggested by
Rob)
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
References: https://gitlab.freedesktop.org/xorg/xserver/issues/629
References: https://gitlab.freedesktop.org/xorg/xserver/merge_requests/180
References: abbc0697d5 ("drm/fb: revert the i915 Actually configure untiled displays from master")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v1)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> (v1)
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Adam Jackson <ajax@redhat.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905185318.31363-1-daniel.vetter@ffwll.ch
We can remove this later as things get closer to launch.
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A few times in CI, we have detected a GPU hang on our Haswell GT2
systems with the characteristic IPEHR of 0x780c0000. When the PSMI w/a
was first introducted, it was applied to all Haswell, but later on we
found an erratum that supposedly restricted the issue to GT1 and so
constrained it only be applied on GT1. That may have been a mistake...
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111692
Fixes: 167bc759e8 ("drm/i915: Restrict PSMI context load w/a to Haswell GT1")
References: 2c55018347 ("drm/i915: Disable PSMI sleep messages on all rings around context switches")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917194746.26710-1-chris@chris-wilson.co.uk
The CMP PCH ID we have in the driver is correct for the CML-U machines we have
in our CI system, but the CML-S and CML-H CI machines appear to use a
different PCH ID, leading our driver to detect no PCH for them.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
References: 729ae330a0 ("drm/i915/cml: Introduce Comet Lake PCH")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111461
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190916233251.387-1-matthew.d.roper@intel.com
commit 4f5368b554
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Jun 14 08:17:23 2019 +0200
drm/kms: Catch mode_object lifetime errors
uncovered a bit a mess in dp drivers. Most drivers (from a quick look,
all except i915) register all the dp stuff in their init code, which
is too early. With CONFIG_DRM_DP_AUX_CHARDEV this will blow up,
because drm_dp_aux_register tries to add a child to a device in sysfs
(the connector) which doesn't even exist yet.
No one seems to have cared thus far. But with the above change I also
moved the setting of dev->registered after the ->load callback, in an
attempt to keep old drivers from hitting any WARN_ON backtraces. But
that moved radeon.ko from the "working, by accident" to "now also
broken" category.
Since this is a huge mess I figured a revert would be simplest. But
this check has already caught issues in i915:
commit 1b9bd09630
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Tue Aug 20 19:16:57 2019 +0300
drm/i915: Do not create a new max_bpc prop for MST connectors
Hence I'd like to retain it. Fix the radeon regression by moving the
setting of dev->registered back to were it was, and stop the
backtraces with an explicit check for dev->driver->load.
Everyone else will stay as broken with CONFIG_DRM_DP_AUX_CHARDEV. The
next patch will improve the kerneldoc and add a todo entry for this.
Fixes: 4f5368b554 ("drm/kms: Catch mode_object lifetime errors")
Cc: Sean Paul <sean@poorly.run>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Michel Dänzer <mdaenzer@redhat.com>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917120936.7501-1-daniel.vetter@ffwll.ch
Adds to support register dump on lpu and dou of pipeline and gcu on D71
Changes since v1:
- For a constant format without additional arguments, use seq_puts()
instead of seq_printf().
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917112525.25490-1-lowry.li@arm.com
Provide a dummy static inline function in the header instead.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lowry Li (Arm Technology China) <Lowry.Li@arm.com>
Cc: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Fixes: 4d74b25ee3 ("drm/komeda: Adds error event print functionality")
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917150314.20892-1-mihail.atanassov@arm.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl
2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L
UPF66k76oOODV7cyndjXnTnRXbeCRAM=
=Szby
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
ttmp[4:5] hold information useful to the debugger. Use ttmp[14:15]
instead, aligning implementation with gfx9 trap handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the common interface print_clk_levels can get the following dpm clock:
-pp_dpm_dcefclk
-pp_dpm_fclk
-pp_dpm_mclk
-pp_dpm_sclk
-pp_dpm_socclk
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Laptops with AMD APU doesn't restore display backlight brightness after
system resume.
This issue started when DC was introduced.
Let's use BL_CORE_SUSPENDRESUME so the backlight core calls
update_status callback after system resume to restore the backlight
level.
Tested on Dell Inspiron 3180 (Stoney Ridge) and Dell Latitude 5495
(Raven Ridge).
Cc: <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
we only want the lowest voltage to be available for dali.
[How]
Use the get_highest_allowed_voltage_level function
to return 0 for dali
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dali is a new asic revision based on raven2
Add the ID and ASICREV_IS_DALI define
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawaii needs to flush caches explicitly, submitting an IB in a user
VMID from kernel mode. There is no s_fence in this case.
Fixes: eb3961a574 ("drm/amdgpu: remove fence context from the job")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sdma_v4 should be ungated when the IP resume back,
otherwise it will hang up and resume time out error.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not try to allocate any amount of memory requested by the user.
Instead limit it to 128 registers. Actually the longest series of
consecutive allowed registers are 48, mmGB_TILE_MODE0-31 and
mmGB_MACROTILE_MODE0-15 (0x2644-0x2673).
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111273
Signed-off-by: Trek <trek00@inbox.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bail from the pci_driver probe function instead of from the drm_driver
load function.
This avoid /dev/dri/card0 temporarily getting registered and then
unregistered again, sending unwanted add / remove udev events to
userspace.
Specifically this avoids triggering the (userspace) bug fixed by this
plymouth merge-request:
https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59
Note that despite that being an userspace bug, not sending unnecessary
udev events is a good idea in general.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1490490
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When more than 2 displays are connected to the graphics card,
only the minimum memory clock is needed. However, when more
displays are connected, the minimum memory clock is not
sufficient enough to support the overwhelming bandwidth.
System will hang under this circumstance.
Also, the old code didn't address HBM cards, which has 2
pseudo channels. We need to add the HBM part here.
[How]
When graphics card connects to 2 or more displays,
switch to high memory clock. Also, choose memory
multiplier based on whether its regular DRAM or HBM.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
1. OUTSTANDING_REQUEST_LIMIT update from 0xFF to 0x1F (HW doc update)
2. using memory type to convert UMC's MCLK to Yclk.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These is no LBPW on Renoir. So removing program of lbpw for renoir.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Restoring clock gating break SMU opeartion afterwards, avoid
this until this further invistigated with SMU.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates MP1_BASE in renoir_ip_offset.h
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With stutter mode enabled, NMI prints frequently.
Disable stutter for the moment because NMI warning storm, and will
enable it back till the issue is addressed
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The earlier patch "Hook up calls to do stereo mux and dig programming..."
doesn't include update for dcn21.
[How]
Align dcn21 gpio settings with updated stereo control interface.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Tigerlake, MI_SEMAPHORE_WAIT grew an extra dword, so be sure to
update the length field and emit that extra parameter and any padding
noop as required.
v2: Define the token shift while we are adding the updated MI_SEMAPHORE_WAIT
v3: Use int instead of bool in the addition so that readers are not left
wondering about the intricacies of the C spec. Now they just have to
worry what the integer value of a boolean operation is...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917123055.28965-1-chris@chris-wilson.co.uk
If we try to clear, or even set, a bit in the register that doesn't
change the register state; skip the write. There's a slight danger in
that the register acts as a latch-on-write, but I do not think we use a
rmw cycle with any such latch registers.
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917080029.27632-1-chris@chris-wilson.co.uk
