Device manager releases device-specific resources when a driver
disconnects from a device, devm_memunmap_pages and
devm_release_mem_region calls in svm_migrate_fini are redundant.
It causes below warning trace after patch "drm/amdgpu: Split
amdgpu_device_fini into early and late", so remove function
svm_migrate_fini.
BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718
WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795
devm_release_action+0x51/0x60
Call Trace:
? memunmap_pages+0x360/0x360
svm_migrate_fini+0x2d/0x60 [amdgpu]
kgd2kfd_device_exit+0x23/0xa0 [amdgpu]
amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu]
amdgpu_device_fini_sw+0x45/0x290 [amdgpu]
amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
drm_dev_release+0x20/0x40 [drm]
release_nodes+0x196/0x1e0
device_release_driver_internal+0x104/0x1d0
driver_detach+0x47/0x90
bus_remove_driver+0x7a/0xd0
pci_unregister_driver+0x3d/0x90
amdgpu_exit+0x11/0x20 [amdgpu]
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If svm migration init failed to create pgmap for device memory, set
pgmap type to 0 to disable device SVM support capability.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For xnack off, restore work dma unmap previous system memory page, and
dma map the updated system memory page to update GPU mapping, this is
not dma mapping leaking, remove the WARN_ONCE for dma mapping leaking.
prange->dma_addr store the VRAM page pfn after the range migrated to
VRAM, should not dma unmap VRAM page when updating GPU mapping or
remove prange. Add helper svm_is_valid_dma_mapping_addr to check VRAM
page and error cases.
Mask out SVM_RANGE_VRAM_DOMAIN flag in dma_addr before calling amdgpu vm
update to avoid BUG_ON(*addr & 0xFFFF00000000003FULL), and set it again
immediately after. This flag is used to know the type of page later to
dma unmapping system memory page.
Fixes: 1d5dbfe6c0 ("drm/amdkfd: classify and map mixed svm range pages in GPU")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SVM range may includes multiple VMAs with different vm_flags, if prange
page index is the last page of the VMA offset + npages, update GPU
mapping to create GPU page table with same VMA access permission.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate kfd_iommu_resume from kfd_resume for fine-tuning
of amdgpu device init/resume/reset/recovery sequence.
v2: squash in fix for !CONFIG_HSA_AMD
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
On some GPUs the PCIe atomic requirement for KFD depends on the MEC
firmware version. Add a firmware version check for this. The minimum
firmware version that works without atomics can be updated in the
device_info structure for each GPU type.
Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init
because the MEC firmware is not loaded yet at the probe stage.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During svm restore pages interrupt handler, kfd_process ref count was
never dropped when xnack was disabled. Therefore, the object was never
released.
Fixes: 2383f56bbe ("drm/amdkfd: page table restore through svm API")
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
On systems with multiple SH per SE compute_static_thread_mgmt_se#
is split into independent masks, one for each SH, in the upper and
lower 16 bits. We need to detect this and apply cu masking to each
SH. The cu mask bits are assigned first to each SE, then to
alternate SHs, then finally to higher CU id. This ensures that
the maximum number of SPIs are engaged as early as possible while
balancing CU assignment to each SH.
v2: Use max SH/SE rather than max SH in cu_per_sh.
v3: Fix comment blocks, ensure se_mask is initially zero filled,
and correctly assign se.sh.cu positions to unset bits in cu_mask.
Signed-off-by: Sean Keely <Sean.Keely@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Restore retry fault or prefetch range, or restore svm range after
eviction to map range to GPU with correct read or write access
permission.
Range may includes multiple VMAs, update GPU page table with offset of
prange, number of pages for each VMA according VMA access permission.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check range access permission to restore GPU retry fault, if GPU retry
fault on address which belongs to VMA, and VMA has no read or write
permission requested by GPU, failed to restore the address. The vm fault
event will pass back to user space.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KFDSVMRangeTest.SetGetAttributesTest randomly fails in stress test.
Note: Google Test filter = KFDSVMRangeTest.*
[==========] Running 18 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 18 tests from KFDSVMRangeTest
[ RUN ] KFDSVMRangeTest.BasicSystemMemTest
[ OK ] KFDSVMRangeTest.BasicSystemMemTest (30 ms)
[ RUN ] KFDSVMRangeTest.SetGetAttributesTest
[ ] Get default atrributes
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure
Value of: expectedDefaultResults[i]
Actual: 4294967295
Expected: outputAttributes[i].value
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure
Value of: expectedDefaultResults[i]
Actual: 4294967295
Expected: outputAttributes[i].value
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:152: Failure
Value of: expectedDefaultResults[i]
Actual: 4
Expected: outputAttributes[i].type
Which is: 2
[ ] Setting/Getting atrributes
[ FAILED ]
the root cause is that svm work queue has not finished when svm_range_get_attr is called, thus
some garbage svm interval tree data make svm_range_get_attr get wrong result. Flush work queue before
iterate svm interval tree.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support to program trap handler settings
when loading driver with software scheduler (sched_policy=2).
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Suggested-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For xnack on, if range ACCESS or ACCESS_IN_PLACE (AIP) by single GPU, or
range is ACCESS_IN_PLACE by mGPUs and all mGPUs connection on XGMI same
hive, the best prefetch location is prefetch_loc GPU. Otherwise, the best
prefetch location is always CPU because GPU does not have coherent
mapping VRAM of other GPUs even with large-BAR PCIe connection.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the SVM get_attr call allows querying, which flags are set
in the entire address range. Add the opposite query, which flags are
clear in the entire address range. Both queries can be combined in a
single get_attr call, which allows answering questions such as, "is
this address range coherent, non-coherent, or a mix of both"?
Proposed userspace for UAPI:
https://github.com/RadeonOpenCompute/ROCR-Runtime/tree/memory_model_queries
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yand <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add u32 gfx_target_version field to kfd_node_properties and
kfd_device_info. Populate <asic>_device_info structs accordingly and
expose to sysfs.
This allows eliminating device-ID-based lookup tables in user mode for
future ASICs.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to workaround HW bug on other Asics and based on
reverting two commits back:
drm/amdkfd: Add heavy-weight TLB flush after unmapping
drm/amdkfd: Add memory sync before TLB flush on unmap
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4bba567c8c.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 7ed9876c97.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 430f8e6edb.
Revert reason: Issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4bba567c8c.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 7ed9876c97.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 430f8e6edb.
Revert reason: Issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KFD support for cyan_skillfish.
v2: whitespace fixes (Alex)
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
start_cpsch and stop_cpsch can be called during kfd device
initialization or during gpu reset/recovery. So they can
run concurrently. Currently in start_cpsch and stop_cpsch,
pm_init and pm_uninit is not protected by the dpm lock.
Imagine such a case that user use packet manager's function
to submit a pm4 packet to hang hws (ie through command
cat /sys/class/kfd/kfd/topology/nodes/1/gpu_id | sudo tee
/sys/kernel/debug/kfd/hang_hws), while kfd device is under
device reset/recovery so packet manager can be not initialized.
There will be unpredictable protection fault in such case.
This patch moves pm_init/uninit inside the dpm lock and check
packet manager is initialized before using packet manager
function.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This variable will be used to determine whether packet
manager is initialized or not, in a future patch.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renaming packets to packet_mgr to reflect the real meaning
of this variable.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to xGMI reporting the min/max bandwidth between direct peers, PCIe
will report the min/max bandwidth to the KFD.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Report the min/max bandwidth in megabytes to the kfd for direct
xgmi connections only. Indirect peers will report 0 since
indirect route is unknown.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1098d658be.
Reason for revert: it causes regressions on several Asics.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 31f3324378.
Reason for revert: it causes regressions on several Asics.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3be4dca197.
Reason for revert: it causes regressions on several Asics.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prange is NULL if vm fault retry on invalid address, for this case, can
not use prange to get pdd, use adev to get gpuidx and then get pdd
instead, then increase pdd vm fault counter.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1098d658be.
Reason for revert: it causes regressions on several Asics.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 31f3324378.
Reason for revert: it causes regressions on several Asics.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3be4dca197.
Reason for revert: it causes regressions on several Asics.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prange is NULL if vm fault retry on invalid address, for this case, can
not use prange to get pdd, use adev to get gpuidx and then get pdd
instead, then increase pdd vm fault counter.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Each zone-device page holds a reference to the SVM BO that manages its
backing storage. This is necessary to correctly hold on to the BO in
case zone_device pages are shared with a child-process.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is for debug purposes only.
It conditionally generates partial migrations to test mixed
CPU/GPU memory domain pages in a prange easily.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Migration skipped for pages that are already in VRAM
domain. These could be the result of previous partial
migrations to SYS RAM, and prefetch back to VRAM.
Ex. Coherent pages in VRAM that were not written/invalidated after
a copy-on-write.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Invalid pages can be the result of pages that have been migrated
already due to copy-on-write procedure or pages that were never
migrated to VRAM in first place. This is not an issue anymore,
as pranges now support mixed memory domains (CPU/GPU).
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
svm ranges can have mixed pages from device or system memory.
A good example is, after a prange has been allocated in VRAM and a
copy-on-write is triggered by a fork. This invalidates some pages
inside the prange. Endding up in mixed pages.
[How]
By classifying each page inside a prange, based on its type. Device or
system memory, during dma mapping call. If page corresponds
to VRAM domain, a flag is set to its dma_addr entry for each GPU.
Then, at the GPU page table mapping. All group of contiguous pages within
the same type are mapped with their proper pte flags.
v2:
Instead of using ttm_res to calculate vram pfns in the svm_range. It is now
done by setting the vram real physical address into drm_addr array.
This makes more flexible VRAM management, plus removes the need to have
a BO reference in the svm_range.
v3:
Remove mapping member from svm_range
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that prange could have mixed domains (VRAM or SYSRAM),
actual_loc nor svm_bo can not be used to check its current
domain and eventually get its pfns to map them in GPU.
Instead, pfns from both domains, are now obtained from
hmm_range_fault through amdgpu_hmm_range_get_pages
call. This is done everytime a GPU map occur.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get the proper owner reference for amdgpu_hmm_range_get_pages function.
This is useful for partial migrations. To avoid migrating back to
system memory, VRAM pages, that are accessible by all devices in the
same memory domain.
Ex. multiple devices in the same hive.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
svm_range_prefault is called right before migrations to VRAM,
to make sure pages are resident in system memory before the migration.
With partial migrations, this reference is used by hmm range get pages
to avoid migrating pages that are already in the same VRAM domain.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The parameter is used in the dev_private_owner to decide if device
pages in the range require to be migrated back to system memory, based
if they are or not in the same memory domain.
In this case, this reference could come from the same memory domain
with devices connected to the same hive.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPUs in the same XGMI hive have direct access to all
members'VRAM. When mapping memory to a GPU, we don't need
hmm_range_fault to fault device-private pages in the same
hive back to the host. Identifying the page owner as the hive,
rather than the individual GPU, accomplishes this.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During GPU page table invalidation with xnack off, new ranges
split may occur concurrently in the same prange. Creating a new
child per split. Each child should also increment its
invalid counter, to assure GPU page table updates in these
ranges.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
