bucket_find_contain() will search the bucket list for a dma_debug_entry.
When the entry isn't found it needs to search other buckets too, since
only the start address of a dma range is hashed (which might be in a
different bucket).
A copy of the dma_debug_entry is used to get the previous hash bucket
but when its list is searched the original dma_debug_entry is to be used
not its modified copy.
This fixes false "device driver tries to sync DMA memory it has not allocated"
warnings.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Horia Geanta <horia.geanta@freescale.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The most expensive part of decimal conversion is the divisions by 10
(albeit done using reciprocal multiplication with appropriately chosen
constants). I decided to see if one could eliminate around half of
these multiplications by emitting two digits at a time, at the cost of a
200 byte lookup table, and it does indeed seem like there is something
to be gained, especially on 64 bits. Microbenchmarking shows
improvements ranging from -50% (for numbers uniformly distributed in [0,
2^64-1]) to -25% (for numbers heavily biased toward the smaller end, a
more realistic distribution).
On a larger scale, perf shows that top, one of the big consumers of /proc
data, uses 0.5-1.0% fewer cpu cycles.
I had to jump through some hoops to get the 32 bit code to compile and run
on my 64 bit machine, so I'm not sure how relevant these numbers are, but
just for comparison the microbenchmark showed improvements between -30%
and -10%.
The bloat-o-meter costs are around 150 bytes (the generated code is a
little smaller, so it's not the full 200 bytes) on both 32 and 64 bit.
I'm aware that extra cache misses won't show up in a microbenchmark as
used above, but on the other hand decimal conversions often happen in bulk
(for example in the case of top).
I have of course tested that the new code generates the same output as the
old, for both the first and last 1e10 numbers in [0,2^64-1] and 4e9
'random' numbers in-between.
Test and verification code on github: https://github.com/Villemoes/dec.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Tested-by: Jeff Epler <jepler@unpythonic.net>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This file contains implementation for all find_*_bit{,_le}
So giving it more generic name looks reasonable.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: George Spelvin <linux@horizon.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Valentin Rothberg <valentinrothberg@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently all 'find_*_bit' family is located in lib/find_next_bit.c,
except 'find_last_bit', which is in lib/find_last_bit.c. It seems,
there's no major benefit to have it separated.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: George Spelvin <linux@horizon.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Valentin Rothberg <valentinrothberg@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset does rework to find_bit function family to achieve better
performance, and decrease size of text. All rework is done in patch 1.
Patches 2 and 3 are about code moving and renaming.
It was boot-tested on x86_64 and MIPS (big-endian) machines.
Performance tests were ran on userspace with code like this:
/* addr[] is filled from /dev/urandom */
start = clock();
while (ret < nbits)
ret = find_next_bit(addr, nbits, ret + 1);
end = clock();
printf("%ld\t", (unsigned long) end - start);
On Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz measurements are: (for
find_next_bit, nbits is 8M, for find_first_bit - 80K)
find_next_bit: find_first_bit:
new current new current
26932 43151 14777 14925
26947 43182 14521 15423
26507 43824 15053 14705
27329 43759 14473 14777
26895 43367 14847 15023
26990 43693 15103 15163
26775 43299 15067 15232
27282 42752 14544 15121
27504 43088 14644 14858
26761 43856 14699 15193
26692 43075 14781 14681
27137 42969 14451 15061
... ...
find_next_bit performance gain is 35-40%;
find_first_bit - no measurable difference.
On ARM machine, there is arch-specific implementation for find_bit.
Thanks a lot to George Spelvin and Rasmus Villemoes for hints and
helpful discussions.
This patch (of 3):
New implementations takes less space in source file (see diffstat) and in
object. For me it's 710 vs 453 bytes of text. It also shows better
performance.
find_last_bit description fixed due to obvious typo.
[akpm@linux-foundation.org: include linux/bitmap.h, per Rasmus]
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: George Spelvin <linux@horizon.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Valentin Rothberg <valentinrothberg@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge second patchbomb from Andrew Morton:
- the rest of MM
- various misc bits
- add ability to run /sbin/reboot at reboot time
- printk/vsprintf changes
- fiddle with seq_printf() return value
* akpm: (114 commits)
parisc: remove use of seq_printf return value
lru_cache: remove use of seq_printf return value
tracing: remove use of seq_printf return value
cgroup: remove use of seq_printf return value
proc: remove use of seq_printf return value
s390: remove use of seq_printf return value
cris fasttimer: remove use of seq_printf return value
cris: remove use of seq_printf return value
openrisc: remove use of seq_printf return value
ARM: plat-pxa: remove use of seq_printf return value
nios2: cpuinfo: remove use of seq_printf return value
microblaze: mb: remove use of seq_printf return value
ipc: remove use of seq_printf return value
rtc: remove use of seq_printf return value
power: wakeup: remove use of seq_printf return value
x86: mtrr: if: remove use of seq_printf return value
linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK
MAINTAINERS: CREDITS: remove Stefano Brivio from B43
.mailmap: add Ricardo Ribalda
CREDITS: add Ricardo Ribalda Delgado
...
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.
See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
seq_has_overflowed() and make public")
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current semantics of string_escape_mem are inadequate for one of its
current users, vsnprintf(). If that is to honour its contract, it must
know how much space would be needed for the entire escaped buffer, and
string_escape_mem provides no way of obtaining that (short of allocating a
large enough buffer (~4 times input string) to let it play with, and
that's definitely a big no-no inside vsnprintf).
So change the semantics for string_escape_mem to be more snprintf-like:
Return the size of the output that would be generated if the destination
buffer was big enough, but of course still only write to the part of dst
it is allowed to, and (contrary to snprintf) don't do '\0'-termination.
It is then up to the caller to detect whether output was truncated and to
append a '\0' if desired. Also, we must output partial escape sequences,
otherwise a call such as snprintf(buf, 3, "%1pE", "\123") would cause
printf to write a \0 to buf[2] but leaving buf[0] and buf[1] with whatever
they previously contained.
This also fixes a bug in the escaped_string() helper function, which used
to unconditionally pass a length of "end-buf" to string_escape_mem();
since the latter doesn't check osz for being insanely large, it would
happily write to dst. For example, kasprintf(GFP_KERNEL, "something and
then %pE", ...); is an easy way to trigger an oops.
In test-string_helpers.c, the -ENOMEM test is replaced with testing for
getting the expected return value even if the buffer is too small. We
also ensure that nothing is written (by relying on a NULL pointer deref)
if the output size is 0 by passing NULL - this has to work for
kasprintf("%pE") to work.
In net/sunrpc/cache.c, I think qword_add still has the same semantics.
Someone should definitely double-check this.
In fs/proc/array.c, I made the minimum possible change, but longer-term it
should stop poking around in seq_file internals.
[andriy.shevchenko@linux.intel.com: simplify qword_add]
[andriy.shevchenko@linux.intel.com: add missed curly braces]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When printf is given the format specifier %pE, it needs a way of obtaining
the total output size that would be generated if the buffer was large
enough, and string_escape_mem doesn't easily provide that. This is a
refactorization of string_escape_mem in preparation of changing its
external API to provide that information.
The somewhat ugly early returns and subsequent seemingly redundant
conditionals are to make the following patch touch as little as possible
in string_helpers.c while still preserving the current behaviour of never
outputting partial escape sequences. That behaviour must also change for
%pE to work as one expects from every other printf specifier.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The helper hex_string() is broken in two ways. First, it doesn't
increment buf regardless of whether there is room to print, so callers
such as kasprintf() that try to probe the correct storage to allocate will
get a too small return value. But even worse, kasprintf() (and likely
anyone else trying to find the size of the result) pass NULL for buf and 0
for size, so we also have end == NULL. But this means that the end-1 in
hex_string() is (char*)-1, so buf < end-1 is true and we get a NULL
pointer deref. I double-checked this with a trivial kernel module that
just did a kasprintf(GFP_KERNEL, "%14ph", "CrashBoomBang").
Nobody seems to be using %ph with kasprintf, but we might as well fix it
before it hits someone.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add format specifiers for printing struct clk:
- '%pC' or '%pCn': name (Common Clock Framework) or address (legacy
clock framework) of the clock,
- '%pCr': rate of the clock.
[akpm@linux-foundation.org: omit code if !CONFIG_HAVE_CLK]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Making ZEROPAD == '0'-' ', we can eliminate a few more instructions.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc doesn't merge or overlap const char[] objects with identical contents
(probably language lawyers would also insist that these things have
different addresses), but there's no reason to have the string
"0123456789ABCDEF" occur in multiple places. hex_asc_upper is declared in
kernel.h and defined in lib/hexdump.c, which is unconditionally compiled
in.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At least since the initial git commit, when base was passed as a separate
parameter, number() has only been called with bases 8, 10 and 16. I'm
guessing that 66 was to accommodate 64 0/1, a sign and a '\0', but the
buffer is only used for the actual digits. Octal digits carry 3 bits of
information, so 24 is enough. Spell that 3*sizeof(num) so one less place
needs to be changed should long long ever be 128 bits. Also remove the
commented-out code that would handle an arbitrary base.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since FORMAT_TYPE_INT is simply 1 more than FORMAT_TYPE_UINT, and
similarly for BYTE/UBYTE, SHORT/USHORT, LONG/ULONG, we can eliminate a few
instructions by making SIGN have the value 1 instead of 2, and then use
arithmetic instead of branches for computing the right spec->type. It's a
little hacky, but certainly in the same spirit as SMALL needing to have
the value 0x20. For example for the spec->qualifier == 'l' case, gcc now
generates
75e: 0f b6 53 01 movzbl 0x1(%rbx),%edx
762: 83 e2 01 and $0x1,%edx
765: 83 c2 09 add $0x9,%edx
768: 88 13 mov %dl,(%rbx)
instead of
763: 0f b6 53 01 movzbl 0x1(%rbx),%edx
767: 83 e2 02 and $0x2,%edx
76a: 80 fa 01 cmp $0x1,%dl
76d: 19 d2 sbb %edx,%edx
76f: 83 c2 0a add $0xa,%edx
772: 88 13 mov %dl,(%rbx)
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
const char *...[] is not const, but an array of pointer to const. So
these arrays cannot be __initconst, but must be __initdata
This fixes section conflicts with LTO.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.1:
New interfaces:
- user-space interface for AEAD
- user-space interface for RNG (i.e., pseudo RNG)
New hashes:
- ARMv8 SHA1/256
- ARMv8 AES
- ARMv8 GHASH
- ARM assembler and NEON SHA256
- MIPS OCTEON SHA1/256/512
- MIPS img-hash SHA1/256 and MD5
- Power 8 VMX AES/CBC/CTR/GHASH
- PPC assembler AES, SHA1/256 and MD5
- Broadcom IPROC RNG driver
Cleanups/fixes:
- prevent internal helper algos from being exposed to user-space
- merge common code from assembly/C SHA implementations
- misc fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (169 commits)
crypto: arm - workaround for building with old binutils
crypto: arm/sha256 - avoid sha256 code on ARMv7-M
crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer
crypto: x86/sha256_ssse3 - move SHA-224/256 SSSE3 implementation to base layer
crypto: x86/sha1_ssse3 - move SHA-1 SSSE3 implementation to base layer
crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer
crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer
crypto: arm/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer
crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer
crypto: arm/sha1-ce - move SHA-1 ARMv8 implementation to base layer
crypto: arm/sha1_neon - move SHA-1 NEON implementation to base layer
crypto: arm/sha1 - move SHA-1 ARM asm implementation to base layer
crypto: sha512-generic - move to generic glue implementation
crypto: sha256-generic - move to generic glue implementation
crypto: sha1-generic - move to generic glue implementation
crypto: sha512 - implement base layer for SHA-512
crypto: sha256 - implement base layer for SHA-256
crypto: sha1 - implement base layer for SHA-1
crypto: api - remove instance when test failed
crypto: api - Move alg ref count init to crypto_check_alg
...
Pull networking updates from David Miller:
1) Add BQL support to via-rhine, from Tino Reichardt.
2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
can support hw switch offloading. From Floria Fainelli.
3) Allow 'ip address' commands to initiate multicast group join/leave,
from Madhu Challa.
4) Many ipv4 FIB lookup optimizations from Alexander Duyck.
5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
Borkmann.
6) Remove the ugly compat support in ARP for ugly layers like ax25,
rose, etc. And use this to clean up the neigh layer, then use it to
implement MPLS support. All from Eric Biederman.
7) Support L3 forwarding offloading in switches, from Scott Feldman.
8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
up route lookups even further. From Alexander Duyck.
9) Many improvements and bug fixes to the rhashtable implementation,
from Herbert Xu and Thomas Graf. In particular, in the case where
an rhashtable user bulk adds a large number of items into an empty
table, we expand the table much more sanely.
10) Don't make the tcp_metrics hash table per-namespace, from Eric
Biederman.
11) Extend EBPF to access SKB fields, from Alexei Starovoitov.
12) Split out new connection request sockets so that they can be
established in the main hash table. Much less false sharing since
hash lookups go direct to the request sockets instead of having to
go first to the listener then to the request socks hashed
underneath. From Eric Dumazet.
13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.
14) Support stable privacy address generation for RFC7217 in IPV6. From
Hannes Frederic Sowa.
15) Hash network namespace into IP frag IDs, also from Hannes Frederic
Sowa.
16) Convert PTP get/set methods to use 64-bit time, from Richard
Cochran.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
fm10k: Bump driver version to 0.15.2
fm10k: corrected VF multicast update
fm10k: mbx_update_max_size does not drop all oversized messages
fm10k: reset head instead of calling update_max_size
fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
fm10k: update xcast mode before synchronizing multicast addresses
fm10k: start service timer on probe
fm10k: fix function header comment
fm10k: comment next_vf_mbx flow
fm10k: don't handle mailbox events in iov_event path and always process mailbox
fm10k: use separate workqueue for fm10k driver
fm10k: Set PF queues to unlimited bandwidth during virtualization
fm10k: expose tx_timeout_count as an ethtool stat
fm10k: only increment tx_timeout_count in Tx hang path
fm10k: remove extraneous "Reset interface" message
fm10k: separate PF only stats so that VF does not display them
fm10k: use hw->mac.max_queues for stats
fm10k: only show actual queues, not the maximum in hardware
fm10k: allow creation of VLAN on default vid
fm10k: fix unused warnings
...
Merge first patchbomb from Andrew Morton:
- arch/sh updates
- ocfs2 updates
- kernel/watchdog feature
- about half of mm/
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (122 commits)
Documentation: update arch list in the 'memtest' entry
Kconfig: memtest: update number of test patterns up to 17
arm: add support for memtest
arm64: add support for memtest
memtest: use phys_addr_t for physical addresses
mm: move memtest under mm
mm, hugetlb: abort __get_user_pages if current has been oom killed
mm, mempool: do not allow atomic resizing
memcg: print cgroup information when system panics due to panic_on_oom
mm: numa: remove migrate_ratelimited
mm: fold arch_randomize_brk into ARCH_HAS_ELF_RANDOMIZE
mm: split ET_DYN ASLR from mmap ASLR
s390: redefine randomize_et_dyn for ELF_ET_DYN_BASE
mm: expose arch_mmap_rnd when available
s390: standardize mmap_rnd() usage
powerpc: standardize mmap_rnd() usage
mips: extract logic for mmap_rnd()
arm64: standardize mmap_rnd() usage
x86: standardize mmap_rnd() usage
arm: factor out mmap ASLR into mmap_rnd
...
Additional test patterns for memtest were introduced since commit
63823126c2 ("x86: memtest: add additional (regular) test patterns"),
but looks like Kconfig was not updated that time.
Update Kconfig entry with the actual number of maximum test patterns.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memtest is a simple feature which fills the memory with a given set of
patterns and validates memory contents, if bad memory regions is detected
it reserves them via memblock API. Since memblock API is widely used by
other architectures this feature can be enabled outside of x86 world.
This patch set promotes memtest to live under generic mm umbrella and
enables memtest feature for arm/arm64.
It was reported that this patch set was useful for tracking down an issue
with some errant DMA on an arm64 platform.
This patch (of 6):
There is nothing platform dependent in the core memtest code, so other
platforms might benefit from this feature too.
[linux@roeck-us.net: MEMTEST depends on MEMBLOCK]
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement huge KVA mapping interfaces on x86.
On x86, MTRRs can override PAT memory types with a 4KB granularity. When
using a huge page, MTRRs can override the memory type of the huge page,
which may lead a performance penalty. The processor can also behave in an
undefined manner if a huge page is mapped to a memory range that MTRRs
have mapped with multiple different memory types. Therefore, the mapping
code falls back to use a smaller page size toward 4KB when a mapping range
is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on
the PAT memory types.
pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a
given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the
range is either covered by WB or not covered and the MTRR default value is
set to WB. 0xFF indicates that MTRRs are disabled.
HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set.
X86_32 without X86_PAE is not supported since such config can unlikey be
benefited from this feature, and there was an issue found in testing.
[fengguang.wu@intel.com: ioremap_pud_capable can be static]
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Robert Elliott <Elliott@hp.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ioremap_pud_range() and ioremap_pmd_range() are changed to create huge I/O
mappings when their capability is enabled, and a request meets required
conditions -- both virtual & physical addresses are aligned by their huge
page size, and a requested range fufills their huge page size. When
pud_set_huge() or pmd_set_huge() returns zero, i.e. no-operation is
performed, the code simply falls back to the next level.
The changes are only enabled when CONFIG_HAVE_ARCH_HUGE_VMAP is defined on
the architecture.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Robert Elliott <Elliott@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add ioremap_pud_enabled() and ioremap_pmd_enabled(), which return 1 when
I/O mappings with pud/pmd are enabled on the kernel.
ioremap_huge_init() calls arch_ioremap_pud_supported() and
arch_ioremap_pmd_supported() to initialize the capabilities at boot-time.
A new kernel option "nohugeiomap" is also added, so that user can disable
the huge I/O map capabilities when necessary.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Robert Elliott <Elliott@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs update from Al Viro:
"Part one:
- struct filename-related cleanups
- saner iov_iter_init() replacements (and switching the syscalls to
use of those)
- ntfs switch to ->write_iter() (Anton)
- aio cleanups and splitting iocb into common and async parts
(Christoph)
- assorted fixes (me, bfields, Andrew Elble)
There's a lot more, including the completion of switchover to
->{read,write}_iter(), d_inode/d_backing_inode annotations, f_flags
race fixes, etc, but that goes after #for-davem merge. David has
pulled it, and once it's in I'll send the next vfs pull request"
* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (35 commits)
sg_start_req(): use import_iovec()
sg_start_req(): make sure that there's not too many elements in iovec
blk_rq_map_user(): use import_single_range()
sg_io(): use import_iovec()
process_vm_access: switch to {compat_,}import_iovec()
switch keyctl_instantiate_key_common() to iov_iter
switch {compat_,}do_readv_writev() to {compat_,}import_iovec()
aio_setup_vectored_rw(): switch to {compat_,}import_iovec()
vmsplice_to_user(): switch to import_iovec()
kill aio_setup_single_vector()
aio: simplify arguments of aio_setup_..._rw()
aio: lift iov_iter_init() into aio_setup_..._rw()
lift iov_iter into {compat_,}do_readv_writev()
NFS: fix BUG() crash in notify_change() with patch to chown_common()
dcache: return -ESTALE not -EBUSY on distributed fs race
NTFS: Version 2.1.32 - Update file write from aio_write to write_iter.
VFS: Add iov_iter_fault_in_multipages_readable()
drop bogus check in file_open_root()
switch security_inode_getattr() to struct path *
constify tomoyo_realpath_from_path()
...
Pull RCU changes from Ingo Molnar:
"The main changes in this cycle were:
- changes permitting use of call_rcu() and friends very early in
boot, for example, before rcu_init() is invoked.
- add in-kernel API to enable and disable expediting of normal RCU
grace periods.
- improve RCU's handling of (hotplug-) outgoing CPUs.
- NO_HZ_FULL_SYSIDLE fixes.
- tiny-RCU updates to make it more tiny.
- documentation updates.
- miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
cpu: Provide smpboot_thread_init() on !CONFIG_SMP kernels as well
cpu: Defer smpboot kthread unparking until CPU known to scheduler
rcu: Associate quiescent-state reports with grace period
rcu: Yet another fix for preemption and CPU hotplug
rcu: Add diagnostics to grace-period cleanup
rcutorture: Default to grace-period-initialization delays
rcu: Handle outgoing CPUs on exit from idle loop
cpu: Make CPU-offline idle-loop transition point more precise
rcu: Eliminate ->onoff_mutex from rcu_node structure
rcu: Process offlining and onlining only at grace-period start
rcu: Move rcu_report_unblock_qs_rnp() to common code
rcu: Rework preemptible expedited bitmask handling
rcu: Remove event tracing from rcu_cpu_notify(), used by offline CPUs
rcutorture: Enable slow grace-period initializations
rcu: Provide diagnostic option to slow down grace-period initialization
rcu: Detect stalls caused by failure to propagate up rcu_node tree
rcu: Eliminate empty HOTPLUG_CPU ifdef
rcu: Simplify sync_rcu_preempt_exp_init()
rcu: Put all orphan-callback-related code under same comment
rcu: Consolidate offline-CPU callback initialization
...
Pull trivial tree from Jiri Kosina:
"Usual trivial tree updates. Nothing outstanding -- mostly printk()
and comment fixes and unused identifier removals"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
goldfish: goldfish_tty_probe() is not using 'i' any more
powerpc: Fix comment in smu.h
qla2xxx: Fix printks in ql_log message
lib: correct link to the original source for div64_u64
si2168, tda10071, m88ds3103: Fix firmware wording
usb: storage: Fix printk in isd200_log_config()
qla2xxx: Fix printk in qla25xx_setup_mode
init/main: fix reset_device comment
ipwireless: missing assignment
goldfish: remove unreachable line of code
coredump: Fix do_coredump() comment
stacktrace.h: remove duplicate declaration task_struct
smpboot.h: Remove unused function prototype
treewide: Fix typo in printk messages
treewide: Fix typo in printk messages
mod_devicetable: fix comment for match_flags
Here's the driver-core / kobject / lz4 tree update for 4.1-rc1.
Everything here has been in linux-next for a while with no reported
issues. It's mostly just coding style cleanups, with other minor
changes in here as well, nothing big.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlUsHkwACgkQMUfUDdst+ykT2gCfbYRyqG+p+jPJnaintZABv04D
atMAn0TFWeyRzlYu/eHpKVnrASUYKxA9
=GwEv
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the driver-core / kobject / lz4 tree update for 4.1-rc1.
Everything here has been in linux-next for a while with no reported
issues. It's mostly just coding style cleanups, with other minor
changes in here as well, nothing big"
* tag 'driver-core-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
debugfs: allow bad parent pointers to be passed in
stable_kernel_rules: Add clause about specification of kernel versions to patch.
kobject: WARN as tip when call kobject_get() to a kobject not initialized
lib/lz4: Pull out constant tables
drivers: platform: parse IRQ flags from resources
driver core: Make probe deferral more quiet
drivers/core/of: Add symlink to device-tree from devices with an OF node
device: Add dev_of_node() accessor
drivers: base: fw: fix ret value when loading fw
firmware: Avoid manual device_create_file() calls
drivers/base: cacheinfo: validate device node for all the caches
drivers/base: use tabs where possible in code indentation
driver core: add missing blank line after declaration
drivers: base: node: Delete space after pointer declaration
drivers: base: memory: Use tabs instead of spaces
firmware_class: Fix whitespace and indentation
drivers: base: dma-mapping: Erase blank space after pointer
drivers: base: class: Add a blank line after declarations
attribute_container: fix missing blank lines after declarations
drivers: base: memory: Fix switch indent
...
Pull timer updates from Ingo Molnar:
"The main changes in this cycle were:
- clockevents state machine cleanups and enhancements (Viresh Kumar)
- clockevents broadcast notifier horror to state machine conversion
and related cleanups (Thomas Gleixner, Rafael J Wysocki)
- clocksource and timekeeping core updates (John Stultz)
- clocksource driver updates and fixes (Ben Dooks, Dmitry Osipenko,
Hans de Goede, Laurent Pinchart, Maxime Ripard, Xunlei Pang)
- y2038 fixes (Xunlei Pang, John Stultz)
- NMI-safe ktime_get_raw_fast() and general refactoring of the clock
code, in preparation to perf's per event clock ID support (Peter
Zijlstra)
- generic sched/clock fixes, optimizations and cleanups (Daniel
Thompson)
- clockevents cpu_down() race fix (Preeti U Murthy)"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
timers/PM: Drop unnecessary braces from tick_freeze()
timers/PM: Fix up tick_unfreeze()
timekeeping: Get rid of stale comment
clockevents: Cleanup dead cpu explicitely
clockevents: Make tick handover explicit
clockevents: Remove broadcast oneshot control leftovers
sched/idle: Use explicit broadcast oneshot control function
ARM: Tegra: Use explicit broadcast oneshot control function
ARM: OMAP: Use explicit broadcast oneshot control function
intel_idle: Use explicit broadcast oneshot control function
ACPI/idle: Use explicit broadcast control function
ACPI/PAD: Use explicit broadcast oneshot control function
x86/amd/idle, clockevents: Use explicit broadcast oneshot control functions
clockevents: Provide explicit broadcast oneshot control functions
clockevents: Remove the broadcast control leftovers
ARM: OMAP: Use explicit broadcast control function
intel_idle: Use explicit broadcast control function
cpuidle: Use explicit broadcast control function
ACPI/processor: Use explicit broadcast control function
ACPI/PAD: Use explicit broadcast control function
...
Pull core locking changes from Ingo Molnar:
"Main changes:
- jump label asm preparatory work for PowerPC (Anton Blanchard)
- rwsem optimizations and cleanups (Davidlohr Bueso)
- mutex optimizations and cleanups (Jason Low)
- futex fix (Oleg Nesterov)
- remove broken atomicity checks from {READ,WRITE}_ONCE() (Peter
Zijlstra)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc, jump_label: Include linux/jump_label.h to get HAVE_JUMP_LABEL define
jump_label: Allow jump labels to be used in assembly
jump_label: Allow asm/jump_label.h to be included in assembly
locking/mutex: Further simplify mutex_spin_on_owner()
locking: Remove atomicy checks from {READ,WRITE}_ONCE
locking/rtmutex: Rename argument in the rt_mutex_adjust_prio_chain() documentation as well
locking/rwsem: Fix lock optimistic spinning when owner is not running
locking: Remove ACCESS_ONCE() usage
locking/rwsem: Check for active lock before bailing on spinning
locking/rwsem: Avoid deceiving lock spinners
locking/rwsem: Set lock ownership ASAP
locking/rwsem: Document barrier need when waking tasks
locking/futex: Check PF_KTHREAD rather than !p->mm to filter out kthreads
locking/mutex: Refactor mutex_spin_on_owner()
locking/mutex: In mutex_spin_on_owner(), return true when owner changes
simillar to iov_iter_fault_in_readable() but differs in that it is
not limited to faulting in the first iovec and instead faults in
"bytes" bytes iterating over the iovecs as necessary.
Also, instead of only faulting in the first and last page of the
range, all pages are faulted in.
This function is needed by NTFS when it does multi page file
writes.
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Conflicts:
drivers/net/ethernet/mellanox/mlx4/cmd.c
net/core/fib_rules.c
net/ipv4/fib_frontend.c
The fib_rules.c and fib_frontend.c conflicts were locking adjustments
in 'net' overlapping addition and removal of code in 'net-next'.
The mlx4 conflict was a bug fix in 'net' happening in the same
place a constant was being replaced with a more suitable macro.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull block layer fix from Jens Axboe:
"Just one patch in this pull request, fixing a regression caused by a
'mathematically correct' change to lcm()"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix blk_stack_limits() regression due to lcm() change
Now that resizing is completely automatic, we need to remove
the max_size setting or the test will fail.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/usb/asix_common.c
drivers/net/usb/sr9800.c
drivers/net/usb/usbnet.c
include/linux/usb/usbnet.h
net/ipv4/tcp_ipv4.c
net/ipv6/tcp_ipv6.c
The TCP conflicts were overlapping changes. In 'net' we added a
READ_ONCE() to the socket cached RX route read, whilst in 'net-next'
Eric Dumazet touched the surrounding code dealing with how mini
sockets are handled.
With USB, it's a case of the same bug fix first going into net-next
and then I cherry picked it back into net.
Signed-off-by: David S. Miller <davem@davemloft.net>
This is especially important in cases where the kernel allocs a new
structure and expects a field to be set from a netlink attribute. If such
attribute is shorter than expected, the rest of the field is left containing
previous data. When such field is read back by the user space, kernel memory
content is leaked.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linux 3.19 commit 69c953c ("lib/lcm.c: lcm(n,0)=lcm(0,n) is 0, not n")
caused blk_stack_limits() to not properly stack queue_limits for stacked
devices (e.g. DM).
Fix this regression by establishing lcm_not_zero() and switching
blk_stack_limits() over to using it.
DM uses blk_set_stacking_limits() to establish the initial top-level
queue_limits that are then built up based on underlying devices' limits
using blk_stack_limits(). In the case of optimal_io_size (io_opt)
blk_set_stacking_limits() establishes a default value of 0. With commit
69c953c, lcm(0, n) is no longer n, which compromises proper stacking of
the underlying devices' io_opt.
Test:
$ modprobe scsi_debug dev_size_mb=10 num_tgts=1 opt_blks=1536
$ cat /sys/block/sde/queue/optimal_io_size
786432
$ dmsetup create node --table "0 100 linear /dev/sde 0"
Before this fix:
$ cat /sys/block/dm-5/queue/optimal_io_size
0
After this fix:
$ cat /sys/block/dm-5/queue/optimal_io_size
786432
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.19+
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
iovec-backed iov_iter instances are assumed to satisfy several properties:
* no more than UIO_MAXIOV elements in iovec array
* total size of all ranges is no more than MAX_RW_COUNT
* all ranges pass access_ok().
The problem is, invariants of data structures should be established in the
primitives creating those data structures, not in the code using those
primitives. And iov_iter_init() violates that principle. For a while we
managed to get away with that, but once the use of iov_iter started to
spread, it didn't take long for shit to hit the fan - missed check in
sys_sendto() had introduced a roothole.
We _do_ have primitives for importing and validating iovecs (both native and
compat ones) and those primitives are almost always followed by shoving the
resulting iovec into iov_iter. Life would be considerably simpler (and safer)
if we combined those primitives with initializing iov_iter.
That gives us two new primitives - import_iovec() and compat_import_iovec().
Calling conventions:
iovec = iov_array;
err = import_iovec(direction, uvec, nr_segs,
ARRAY_SIZE(iov_array), &iovec,
&iter);
imports user vector into kernel space (into iov_array if it fits, allocated
if it doesn't fit or if iovec was NULL), validates it and sets iter up to
refer to it. On success 0 is returned and allocated kernel copy (or NULL
if the array had fit into caller-supplied one) is returned via iovec.
On failure all allocations are undone and -E... is returned. If the total
size of ranges exceeds MAX_RW_COUNT, the excess is silently truncated.
compat_import_iovec() expects uvec to be a pointer to user array of compat_iovec;
otherwise it's identical to import_iovec().
Finally, import_single_range() sets iov_iter backed by single-element iovec
covering a user-supplied range -
err = import_single_range(direction, address, size, iovec, &iter);
does validation and sets iter up. Again, size in excess of MAX_RW_COUNT gets
silently truncated.
Next commits will be switching the things up to use of those and reducing
the amount of iov_iter_init() instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Changes permitting use of call_rcu() and friends very early in
boot, for example, before rcu_init() is invoked.
- Miscellaneous fixes.
- Add in-kernel API to enable and disable expediting of normal RCU
grace periods.
- Improve RCU's handling of (hotplug-) outgoing CPUs.
Note: ARM support is lagging a bit here, and these improved
diagnostics might generate (harmless) splats.
- NO_HZ_FULL_SYSIDLE fixes.
- Tiny RCU updates to make it more tiny.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
nftables sets will be converted to use so called setextensions, moving
the key to a non-fixed position. To hash it, the obj_hashfn must be used,
however it so far doesn't receive the length parameter.
Pass the key length to obj_hashfn() and convert existing users.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There's no reason to allocate the dec{32,64}table on the stack; it
just wastes a bunch of instructions setting them up and, of course,
also consumes quite a bit of stack. Using size_t for such small
integers is a little excessive.
$ scripts/bloat-o-meter /tmp/built-in.o lib/built-in.o
add/remove: 2/2 grow/shrink: 2/0 up/down: 1304/-1548 (-244)
function old new delta
lz4_decompress_unknownoutputsize 55 718 +663
lz4_decompress 55 632 +577
dec64table - 32 +32
dec32table - 32 +32
lz4_uncompress 747 - -747
lz4_uncompress_unknownoutputsize 801 - -801
The now inlined lz4_uncompress functions used to have a stack
footprint of 176 bytes (according to -fstack-usage); their inlinees
have increased their stack use from 32 bytes to 48 and 80 bytes,
respectively.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rhashtable_destroy() variant which stops rehashes, iterates over
the table and calls a callback to release resources.
Avoids need for nft_hash to embed rhashtable internals and allows to
get rid of the being_destroyed flag. It also saves a 2nd mutex
lock upon destruction.
Also fixes an RCU lockdep splash on nft set destruction due to
calling rht_for_each_entry_safe() without holding bucket locks.
Open code this loop as we need know that no mutations may occur in
parallel.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new bool automatic_shrinking to require the
user to explicitly opt-in to automatic shrinking of tables.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a comment on the choice of the value 16 as the
maximum chain length before we force a rehash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
net/netfilter/nf_tables_core.c
The nf_tables_core.c conflict was resolved using a conflict resolution
from Stephen Rothwell as a guide.
Signed-off-by: David S. Miller <davem@davemloft.net>
