Commit Graph

7644 Commits

Author SHA1 Message Date
Willy Tarreau
6922110d15 net: linkwatch: fix failure to restore device state across suspend/resume
After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed
that my Ethernet port to which a bond and a VLAN interface are attached
appeared to remain up after resuming from suspend with the cable unplugged
(and that problem still persists with 5.10-LTS).

It happens that the following happens:

  - the network driver (e1000e here) prepares to suspend, calls e1000e_down()
    which calls netif_carrier_off() to signal that the link is going down.
  - netif_carrier_off() adds a link_watch event to the list of events for
    this device
  - the device is completely stopped.
  - the machine suspends
  - the cable is unplugged and the machine brought to another location
  - the machine is resumed
  - the queued linkwatch events are processed for the device
  - the device doesn't yet have the __LINK_STATE_PRESENT bit and its events
    are silently dropped
  - the device is resumed with its link down
  - the upper VLAN and bond interfaces are never notified that the link had
    been turned down and remain up
  - the only way to provoke a change is to physically connect the machine
    to a port and possibly unplug it.

The state after resume looks like this:
  $ ip -br li | egrep 'bond|eth'
  bond0            UP             e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP>
  eth0             DOWN           e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP>
  eth0.2@eth0      UP             e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP>

Placing an explicit call to netdev_state_change() either in the suspend
or the resume code in the NIC driver worked around this but the solution
is not satisfying.

The issue in fact really is in link_watch that loses events while it
ought not to. It happens that the test for the device being present was
added by commit 124eee3f69 ("net: linkwatch: add check for netdevice
being present to linkwatch_do_dev") in 4.20 to avoid an access to
devices that are not present.

Instead of dropping events, this patch proceeds slightly differently by
postponing their handling so that they happen after the device is fully
resumed.

Fixes: 124eee3f69 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev")
Link: https://lists.openwall.net/netdev/2018/03/15/62
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210809160628.22623-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11 14:43:16 -07:00
Yunsheng Lin
0fa32ca438 page_pool: mask the page->signature before the checking
As mentioned in commit c07aea3ef4 ("mm: add a signature in
struct page"):
"The page->signature field is aliased to page->lru.next and
page->compound_head."

And as the comment in page_is_pfmemalloc():
"lru.next has bit 1 set if the page is allocated from the
pfmemalloc reserves. Callers may simply overwrite it if they
do not need to preserve that information."

The page->signature is OR’ed with PP_SIGNATURE when a page is
allocated in page pool, see __page_pool_alloc_pages_slow(),
and page->signature is checked directly with PP_SIGNATURE in
page_pool_return_skb_page(), which might cause resoure leaking
problem for a page from page pool if bit 1 of lru.next is set
for a pfmemalloc page. What happens here is that the original
pp->signature is OR'ed with PP_SIGNATURE after the allocation
in order to preserve any existing bits(such as the bit 1, used
to indicate a pfmemalloc page), so when those bits are present,
those page is not considered to be from page pool and the DMA
mapping of those pages will be left stale.

As bit 0 is for page->compound_head, So mask both bit 0/1 before
the checking in page_pool_return_skb_page(). And we will return
those pfmemalloc pages back to the page allocator after cleaning
up the DMA mapping.

Fixes: 6a5bcd84e8 ("page_pool: Allow drivers to hint on SKB recycling")
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-09 10:03:02 +01:00
David S. Miller
fc16a5322e Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2021-07-29

The following pull-request contains BPF updates for your *net* tree.

We've added 9 non-merge commits during the last 14 day(s) which contain
a total of 20 files changed, 446 insertions(+), 138 deletions(-).

The main changes are:

1) Fix UBSAN out-of-bounds splat for showing XDP link fdinfo, from Lorenz Bauer.

2) Fix insufficient Spectre v4 mitigation in BPF runtime, from Daniel Borkmann,
   Piotr Krysiuk and Benedict Schlueter.

3) Batch of fixes for BPF sockmap found under stress testing, from John Fastabend.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 00:53:32 +01:00
zhang kai
1e60cebf82 net: let flow have same hash in two directions
using same source and destination ip/port for flow hash calculation
within the two directions.

Signed-off-by: zhang kai <zhangkaiheb@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 12:54:06 +01:00
John Fastabend
9635720b7c bpf, sockmap: Fix memleak on ingress msg enqueue
If backlog handler is running during a tear down operation we may enqueue
data on the ingress msg queue while tear down is trying to free it.

 sk_psock_backlog()
   sk_psock_handle_skb()
     skb_psock_skb_ingress()
       sk_psock_skb_ingress_enqueue()
         sk_psock_queue_msg(psock,msg)
                                           spin_lock(ingress_lock)
                                            sk_psock_zap_ingress()
                                             _sk_psock_purge_ingerss_msg()
                                              _sk_psock_purge_ingress_msg()
                                            -- free ingress_msg list --
                                           spin_unlock(ingress_lock)
           spin_lock(ingress_lock)
           list_add_tail(msg,ingress_msg) <- entry on list with no one
                                             left to free it.
           spin_unlock(ingress_lock)

To fix we only enqueue from backlog if the ENABLED bit is set. The tear
down logic clears the bit with ingress_lock set so we wont enqueue the
msg in the last step.

Fixes: 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-4-john.fastabend@gmail.com
2021-07-27 14:55:30 -07:00
John Fastabend
476d98018f bpf, sockmap: On cleanup we additionally need to remove cached skb
Its possible if a socket is closed and the receive thread is under memory
pressure it may have cached a skb. We need to ensure these skbs are
free'd along with the normal ingress_skb queue.

Before 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()") tear
down and backlog processing both had sock_lock for the common case of
socket close or unhash. So it was not possible to have both running in
parrallel so all we would need is the kfree in those kernels.

But, latest kernels include the commit 799aa7f98d5e and this requires a
bit more work. Without the ingress_lock guarding reading/writing the
state->skb case its possible the tear down could run before the state
update causing it to leak memory or worse when the backlog reads the state
it could potentially run interleaved with the tear down and we might end up
free'ing the state->skb from tear down side but already have the reference
from backlog side. To resolve such races we wrap accesses in ingress_lock
on both sides serializing tear down and backlog case. In both cases this
only happens after an EAGAIN error case so having an extra lock in place
is likely fine. The normal path will skip the locks.

Note, we check state->skb before grabbing lock. This works because
we can only enqueue with the mutex we hold already. Avoiding a race
on adding state->skb after the check. And if tear down path is running
that is also fine if the tear down path then removes state->skb we
will simply set skb=NULL and the subsequent goto is skipped. This
slight complication avoids locking in normal case.

With this fix we no longer see this warning splat from tcp side on
socket close when we hit the above case with redirect to ingress self.

[224913.935822] WARNING: CPU: 3 PID: 32100 at net/core/stream.c:208 sk_stream_kill_queues+0x212/0x220
[224913.935841] Modules linked in: fuse overlay bpf_preload x86_pkg_temp_thermal intel_uncore wmi_bmof squashfs sch_fq_codel efivarfs ip_tables x_tables uas xhci_pci ixgbe mdio xfrm_algo xhci_hcd wmi
[224913.935897] CPU: 3 PID: 32100 Comm: fgs-bench Tainted: G          I       5.14.0-rc1alu+ #181
[224913.935908] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[224913.935914] RIP: 0010:sk_stream_kill_queues+0x212/0x220
[224913.935923] Code: 8b 83 20 02 00 00 85 c0 75 20 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 df e8 2b 11 fe ff eb c3 0f 0b e9 7c ff ff ff 0f 0b eb ce <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 90 0f 1f 44 00 00 41 57 41
[224913.935932] RSP: 0018:ffff88816271fd38 EFLAGS: 00010206
[224913.935941] RAX: 0000000000000ae8 RBX: ffff88815acd5240 RCX: dffffc0000000000
[224913.935948] RDX: 0000000000000003 RSI: 0000000000000ae8 RDI: ffff88815acd5460
[224913.935954] RBP: ffff88815acd5460 R08: ffffffff955c0ae8 R09: fffffbfff2e6f543
[224913.935961] R10: ffffffff9737aa17 R11: fffffbfff2e6f542 R12: ffff88815acd5390
[224913.935967] R13: ffff88815acd5480 R14: ffffffff98d0c080 R15: ffffffff96267500
[224913.935974] FS:  00007f86e6bd1700(0000) GS:ffff888451cc0000(0000) knlGS:0000000000000000
[224913.935981] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[224913.935988] CR2: 000000c0008eb000 CR3: 00000001020e0005 CR4: 00000000003706e0
[224913.935994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[224913.936000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[224913.936007] Call Trace:
[224913.936016]  inet_csk_destroy_sock+0xba/0x1f0
[224913.936033]  __tcp_close+0x620/0x790
[224913.936047]  tcp_close+0x20/0x80
[224913.936056]  inet_release+0x8f/0xf0
[224913.936070]  __sock_release+0x72/0x120
[224913.936083]  sock_close+0x14/0x20

Fixes: a136678c0b ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-3-john.fastabend@gmail.com
2021-07-27 14:55:21 -07:00
John Fastabend
343597d558 bpf, sockmap: Zap ingress queues after stopping strparser
We don't want strparser to run and pass skbs into skmsg handlers when
the psock is null. We just sk_drop them in this case. When removing
a live socket from map it means extra drops that we do not need to
incur. Move the zap below strparser close to avoid this condition.

This way we stop the stream parser first stopping it from processing
packets and then delete the psock.

Fixes: a136678c0b ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-2-john.fastabend@gmail.com
2021-07-27 14:55:10 -07:00
Parav Pandit
149ea30fdd devlink: Fix phys_port_name of virtual port and merge error
Merge commit cited in fixes tag was incorrect. Due to it phys_port_name
of the virtual port resulted in incorrect name.

Also the phys_port_name of the physical port was written twice due to
the merge error.

Fix it by removing the old code and inserting back the misplaced code.

Related commits of interest in net and net-next branches that resulted
in merge conflict are:

in net-next branch:
commit f285f37cb1 ("devlink: append split port number to the port name")

in net branch:
commit b28d8f0c25 ("devlink: Correct VIRTUAL port to not have phys_port attributes")

Fixes: 126285651b ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25 10:44:54 +01:00
Pravin B Shelar
a17ad09617 net: Fix zero-copy head len calculation.
In some cases skb head could be locked and entire header
data is pulled from skb. When skb_zerocopy() called in such cases,
following BUG is triggered. This patch fixes it by copying entire
skb in such cases.
This could be optimized incase this is performance bottleneck.

---8<---
kernel BUG at net/core/skbuff.c:2961!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G           OE     5.4.0-77-generic #86-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:skb_zerocopy+0x37a/0x3a0
RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246
Call Trace:
 <IRQ>
 queue_userspace_packet+0x2af/0x5e0 [openvswitch]
 ovs_dp_upcall+0x3d/0x60 [openvswitch]
 ovs_dp_process_packet+0x125/0x150 [openvswitch]
 ovs_vport_receive+0x77/0xd0 [openvswitch]
 netdev_port_receive+0x87/0x130 [openvswitch]
 netdev_frame_hook+0x4b/0x60 [openvswitch]
 __netif_receive_skb_core+0x2b4/0xc90
 __netif_receive_skb_one_core+0x3f/0xa0
 __netif_receive_skb+0x18/0x60
 process_backlog+0xa9/0x160
 net_rx_action+0x142/0x390
 __do_softirq+0xe1/0x2d6
 irq_exit+0xae/0xb0
 do_IRQ+0x5a/0xf0
 common_interrupt+0xf/0xf

Code that triggered BUG:
int
skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen)
{
        int i, j = 0;
        int plen = 0; /* length of skb->head fragment */
        int ret;
        struct page *page;
        unsigned int offset;

        BUG_ON(!from->head_frag && !hlen);

Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-18 09:42:17 -07:00
Ilias Apalodimas
2cc3aeb5ec skbuff: Fix a potential race while recycling page_pool packets
As Alexander points out, when we are trying to recycle a cloned/expanded
SKB we might trigger a race.  The recycling code relies on the
pp_recycle bit to trigger,  which we carry over to cloned SKBs.
If that cloned SKB gets expanded or if we get references to the frags,
call skb_release_data() and overwrite skb->head, we are creating separate
instances accessing the same page frags.  Since the skb_release_data()
will first try to recycle the frags,  there's a potential race between
the original and cloned SKB, since both will have the pp_recycle bit set.

Fix this by explicitly those SKBs not recyclable.
The atomic_sub_return effectively limits us to a single release case,
and when we are calling skb_release_data we are also releasing the
option to perform the recycling, or releasing the pages from the page pool.

Fixes: 6a5bcd84e8 ("page_pool: Allow drivers to hint on SKB recycling")
Reported-by: Alexander Duyck <alexanderduyck@fb.com>
Suggested-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16 11:37:00 -07:00
David S. Miller
20192d9c9f Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Andrii Nakryiko says:

====================
pull-request: bpf 2021-07-15

The following pull-request contains BPF updates for your *net* tree.

We've added 9 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 37 insertions(+), 15 deletions(-).

The main changes are:

1) Fix NULL pointer dereference in BPF_TEST_RUN for BPF_XDP_DEVMAP and
   BPF_XDP_CPUMAP programs, from Xuan Zhuo.

2) Fix use-after-free of net_device in XDP bpf_link, from Xuan Zhuo.

3) Follow-up fix to subprog poke descriptor use-after-free problem, from
   Daniel Borkmann and John Fastabend.

4) Fix out-of-range array access in s390 BPF JIT backend, from Colin Ian King.

5) Fix memory leak in BPF sockmap, from John Fastabend.

6) Fix for sockmap to prevent proc stats reporting bug, from John Fastabend
   and Jakub Sitnicki.

7) Fix NULL pointer dereference in bpftool, from Tobias Klauser.

8) AF_XDP documentation fixes, from Baruch Siach.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-15 14:39:45 -07:00
John Fastabend
7e6b27a691 bpf, sockmap: Fix potential memory leak on unlikely error case
If skb_linearize is needed and fails we could leak a msg on the error
handling. To fix ensure we kfree the msg block before returning error.
Found during code review.

Fixes: 4363023d26 ("bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/bpf/20210712195546.423990-2-john.fastabend@gmail.com
2021-07-15 19:49:12 +02:00
Qitao Xu
70713dddf3 net_sched: introduce tracepoint trace_qdisc_enqueue()
Tracepoint trace_qdisc_enqueue() is introduced to trace skb at
the entrance of TC layer on TX side. This is similar to
trace_qdisc_dequeue():

1. For both we only trace successful cases. The failure cases
   can be traced via trace_kfree_skb().

2. They are called at entrance or exit of TC layer, not for each
   ->enqueue() or ->dequeue(). This is intentional, because
   we want to make trace_qdisc_enqueue() symmetric to
   trace_qdisc_dequeue(), which is easier to use.

The return value of qdisc_enqueue() is not interesting here,
we have Qdisc's drop packets in ->dequeue(), it is impossible to
trace them even if we have the return value, the only way to trace
them is tracing kfree_skb().

We only add information we need to trace ring buffer. If any other
information is needed, it is easy to extend it without breaking ABI,
see commit 3dd344ea84 ("net: tracepoint: exposing sk_family in all
tcp:tracepoints").

Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Qitao Xu <qitao.xu@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-15 10:32:38 -07:00
Linus Torvalds
8096acd744 Networking fixes for 5.14-rc2, including fixes from bpf and netfilter.
Current release - regressions:
 
  - sock: fix parameter order in sock_setsockopt()
 
 Current release - new code bugs:
 
  - netfilter: nft_last:
      - fix incorrect arithmetic when restoring last used
      - honor NFTA_LAST_SET on restoration
 
 Previous releases - regressions:
 
  - udp: properly flush normal packet at GRO time
 
  - sfc: ensure correct number of XDP queues; don't allow enabling the
         feature if there isn't sufficient resources to Tx from any CPU
 
  - dsa: sja1105: fix address learning getting disabled on the CPU port
 
  - mptcp: addresses a rmem accounting issue that could keep packets
         in subflow receive buffers longer than necessary, delaying
 	MPTCP-level ACKs
 
  - ip_tunnel: fix mtu calculation for ETHER tunnel devices
 
  - do not reuse skbs allocated from skbuff_fclone_cache in the napi
    skb cache, we'd try to return them to the wrong slab cache
 
  - tcp: consistently disable header prediction for mptcp
 
 Previous releases - always broken:
 
  - bpf: fix subprog poke descriptor tracking use-after-free
 
  - ipv6:
       - allocate enough headroom in ip6_finish_output2() in case
         iptables TEE is used
       - tcp: drop silly ICMPv6 packet too big messages to avoid
         expensive and pointless lookups (which may serve as a DDOS
 	vector)
       - make sure fwmark is copied in SYNACK packets
       - fix 'disable_policy' for forwarded packets (align with IPv4)
 
  - netfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state
 
  - netfilter: conntrack: do not mark RST in the reply direction coming
       after SYN packet for an out-of-sync entry
 
  - mptcp: cleanly handle error conditions with MP_JOIN and syncookies
 
  - mptcp: fix double free when rejecting a join due to port mismatch
 
  - validate lwtstate->data before returning from skb_tunnel_info()
 
  - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
 
  - mt76: mt7921: continue to probe driver when fw already downloaded
 
  - bonding: fix multiple issues with offloading IPsec to (thru?) bond
 
  - stmmac: ptp: fix issues around Qbv support and setting time back
 
  - bcmgenet: always clear wake-up based on energy detection
 
 Misc:
 
  - sctp: move 198 addresses from unusable to private scope
 
  - ptp: support virtual clocks and timestamping
 
  - openvswitch: optimize operation for key comparison
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmDu3mMACgkQMUZtbf5S
 Irsjxg//UwcPJMYFmXV+fGkEsWYe1Kf29FcUDEeANFtbltfAcIfZ0GoTbSDRnrVb
 HcYAKcm4XRx5bWWdQrQsQq/yiLbnS/rSLc7VRB+uRHWRKl3eYcaUB2rnCXsxrjGw
 wQJgOmztDCJS4BIky24iQpF/8lg7p/Gj2Ih532gh93XiYo612FrEJKkYb2/OQfYX
 GkbnZ0kL2Y1SV+bhy6aT5azvhHKM4/3eA4fHeJ2p8e2gOZ5ni0vpX0xEzdzKOCd0
 vwR/Wu3h/+2QuFYVcSsVguuM++JXACG8MAS/Tof78dtNM4a3kQxzqeh5Bv6IkfTu
 rokENLq4pjNRy+nBAOeQZj8Jd0K0kkf/PN9WMdGQtplMoFhjjV25R6PeRrV9wwPo
 peozIz2MuQo7Kfof1D+44h2foyLfdC28/Z0CvRbDpr5EHOfYynvBbrnhzIGdQp6V
 xgftKTOdgz2Djgg8HiblZund1FA44OYerddVAASrIsnSFnIz1VLVQIsfV+GLBwwc
 FawrIZ6WfIjzRSrDGOvDsbAQI47T/1jbaPJeK6XgjWkQmjEd6UtRWRZLYCxemQEw
 4HP3sWC96BOehuD8ylipVE1oFqrxCiOB/fZxezXqjo8dSX3NLdak4cCHTHoW5SuZ
 eEAxQRaBliKd+P7hoy9cZ57CAu3zUa8kijfM5QRlCAHF+zSxaPs=
 =QFnb
 -----END PGP SIGNATURE-----

Merge tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski.
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - sock: fix parameter order in sock_setsockopt()

  Current release - new code bugs:

   - netfilter: nft_last:
       - fix incorrect arithmetic when restoring last used
       - honor NFTA_LAST_SET on restoration

  Previous releases - regressions:

   - udp: properly flush normal packet at GRO time

   - sfc: ensure correct number of XDP queues; don't allow enabling the
     feature if there isn't sufficient resources to Tx from any CPU

   - dsa: sja1105: fix address learning getting disabled on the CPU port

   - mptcp: addresses a rmem accounting issue that could keep packets in
     subflow receive buffers longer than necessary, delaying MPTCP-level
     ACKs

   - ip_tunnel: fix mtu calculation for ETHER tunnel devices

   - do not reuse skbs allocated from skbuff_fclone_cache in the napi
     skb cache, we'd try to return them to the wrong slab cache

   - tcp: consistently disable header prediction for mptcp

  Previous releases - always broken:

   - bpf: fix subprog poke descriptor tracking use-after-free

   - ipv6:
       - allocate enough headroom in ip6_finish_output2() in case
         iptables TEE is used
       - tcp: drop silly ICMPv6 packet too big messages to avoid
         expensive and pointless lookups (which may serve as a DDOS
         vector)
       - make sure fwmark is copied in SYNACK packets
       - fix 'disable_policy' for forwarded packets (align with IPv4)

   - netfilter: conntrack:
       - do not renew entry stuck in tcp SYN_SENT state
       - do not mark RST in the reply direction coming after SYN packet
         for an out-of-sync entry

   - mptcp: cleanly handle error conditions with MP_JOIN and syncookies

   - mptcp: fix double free when rejecting a join due to port mismatch

   - validate lwtstate->data before returning from skb_tunnel_info()

   - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path

   - mt76: mt7921: continue to probe driver when fw already downloaded

   - bonding: fix multiple issues with offloading IPsec to (thru?) bond

   - stmmac: ptp: fix issues around Qbv support and setting time back

   - bcmgenet: always clear wake-up based on energy detection

  Misc:

   - sctp: move 198 addresses from unusable to private scope

   - ptp: support virtual clocks and timestamping

   - openvswitch: optimize operation for key comparison"

* tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits)
  net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
  sfc: add logs explaining XDP_TX/REDIRECT is not available
  sfc: ensure correct number of XDP queues
  sfc: fix lack of XDP TX queues - error XDP TX failed (-22)
  net: fddi: fix UAF in fza_probe
  net: dsa: sja1105: fix address learning getting disabled on the CPU port
  net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload
  net: Use nlmsg_unicast() instead of netlink_unicast()
  octeontx2-pf: Fix uninitialized boolean variable pps
  ipv6: allocate enough headroom in ip6_finish_output2()
  net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific
  net: bridge: multicast: fix MRD advertisement router port marking race
  net: bridge: multicast: fix PIM hello router port marking race
  net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340
  dsa: fix for_each_child.cocci warnings
  virtio_net: check virtqueue_add_sgs() return value
  mptcp: properly account bulk freed memory
  selftests: mptcp: fix case multiple subflows limited by server
  mptcp: avoid processing packet if a subflow reset
  mptcp: fix syncookie process if mptcp can not_accept new subflow
  ...
2021-07-14 09:24:32 -07:00
Xuan Zhuo
5acc7d3e8d xdp, net: Fix use-after-free in bpf_xdp_link_release
The problem occurs between dev_get_by_index() and dev_xdp_attach_link().
At this point, dev_xdp_uninstall() is called. Then xdp link will not be
detached automatically when dev is released. But link->dev already
points to dev, when xdp link is released, dev will still be accessed,
but dev has been released.

dev_get_by_index()        |
link->dev = dev           |
                          |      rtnl_lock()
                          |      unregister_netdevice_many()
                          |          dev_xdp_uninstall()
                          |      rtnl_unlock()
rtnl_lock();              |
dev_xdp_attach_link()     |
rtnl_unlock();            |
                          |      netdev_run_todo() // dev released
bpf_xdp_link_release()    |
    /* access dev.        |
       use-after-free */  |

[   45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0
[   45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732
[   45.968297]
[   45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22
[   45.969222] Hardware name: linux,dummy-virt (DT)
[   45.969795] Call trace:
[   45.970106]  dump_backtrace+0x0/0x4c8
[   45.970564]  show_stack+0x30/0x40
[   45.970981]  dump_stack_lvl+0x120/0x18c
[   45.971470]  print_address_description.constprop.0+0x74/0x30c
[   45.972182]  kasan_report+0x1e8/0x200
[   45.972659]  __asan_report_load8_noabort+0x2c/0x50
[   45.973273]  bpf_xdp_link_release+0x3b8/0x3d0
[   45.973834]  bpf_link_free+0xd0/0x188
[   45.974315]  bpf_link_put+0x1d0/0x218
[   45.974790]  bpf_link_release+0x3c/0x58
[   45.975291]  __fput+0x20c/0x7e8
[   45.975706]  ____fput+0x24/0x30
[   45.976117]  task_work_run+0x104/0x258
[   45.976609]  do_notify_resume+0x894/0xaf8
[   45.977121]  work_pending+0xc/0x328
[   45.977575]
[   45.977775] The buggy address belongs to the page:
[   45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998
[   45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff)
[   45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000
[   45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[   45.982259] page dumped because: kasan: bad access detected
[   45.982948]
[   45.983153] Memory state around the buggy address:
[   45.983753]  ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   45.984645]  ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   45.986419]                                               ^
[   45.987112]  ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   45.988006]  ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   45.988895] ==================================================================
[   45.989773] Disabling lock debugging due to kernel taint
[   45.990552] Kernel panic - not syncing: panic_on_warn set ...
[   45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G    B             5.13.0+ #22
[   45.991929] Hardware name: linux,dummy-virt (DT)
[   45.992448] Call trace:
[   45.992753]  dump_backtrace+0x0/0x4c8
[   45.993208]  show_stack+0x30/0x40
[   45.993627]  dump_stack_lvl+0x120/0x18c
[   45.994113]  dump_stack+0x1c/0x34
[   45.994530]  panic+0x3a4/0x7d8
[   45.994930]  end_report+0x194/0x198
[   45.995380]  kasan_report+0x134/0x200
[   45.995850]  __asan_report_load8_noabort+0x2c/0x50
[   45.996453]  bpf_xdp_link_release+0x3b8/0x3d0
[   45.997007]  bpf_link_free+0xd0/0x188
[   45.997474]  bpf_link_put+0x1d0/0x218
[   45.997942]  bpf_link_release+0x3c/0x58
[   45.998429]  __fput+0x20c/0x7e8
[   45.998833]  ____fput+0x24/0x30
[   45.999247]  task_work_run+0x104/0x258
[   45.999731]  do_notify_resume+0x894/0xaf8
[   46.000236]  work_pending+0xc/0x328
[   46.000697] SMP: stopping secondary CPUs
[   46.001226] Dumping ftrace buffer:
[   46.001663]    (ftrace buffer empty)
[   46.002110] Kernel Offset: disabled
[   46.002545] CPU features: 0x00000001,23202c00
[   46.003080] Memory Limit: none

Fixes: aa8d3a716b ("bpf, xdp: Add bpf_link-based XDP attachment API")
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210710031635.41649-1-xuanzhuo@linux.alibaba.com
2021-07-13 08:22:31 -07:00
Antoine Tenart
28b34f01a7 net: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cache
Some socket buffers allocated in the fclone cache (in __alloc_skb) can
end-up in the following path[1]:

napi_skb_finish
  __kfree_skb_defer
    napi_skb_cache_put

The issue is napi_skb_cache_put is not fclone friendly and will put
those skbuff in the skb cache to be reused later, although this cache
only expects skbuff allocated from skbuff_head_cache. When this happens
the skbuff is eventually freed using the wrong origin cache, and we can
see traces similar to:

[ 1223.947534] cache_from_obj: Wrong slab cache. skbuff_head_cache but object is from skbuff_fclone_cache
[ 1223.948895] WARNING: CPU: 3 PID: 0 at mm/slab.h:442 kmem_cache_free+0x251/0x3e0
[ 1223.950211] Modules linked in:
[ 1223.950680] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.13.0+ #474
[ 1223.951587] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-3.fc34 04/01/2014
[ 1223.953060] RIP: 0010:kmem_cache_free+0x251/0x3e0

Leading sometimes to other memory related issues.

Fix this by using __kfree_skb for fclone skbuff, similar to what is done
the other place __kfree_skb_defer is called.

[1] At least in setups using veth pairs and tunnels. Building a kernel
    with KASAN we can for example see packets allocated in
    sk_stream_alloc_skb hit the above path and later the issue arises
    when the skbuff is reused.

Fixes: 9243adfc31 ("skbuff: queue NAPI_MERGED_FREE skbs into NAPI cache instead of freeing")
Cc: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-09 11:26:27 -07:00
Florian Fainelli
9615fe36b3 skbuff: Fix build with SKB extensions disabled
We will fail to build with CONFIG_SKB_EXTENSIONS disabled after
8550ff8d8c ("skbuff: Release nfct refcount on napi stolen or re-used
skbs") since there is an unconditionally use of skb_ext_find() without
an appropriate stub. Simply build the code conditionally and properly
guard against both COFNIG_SKB_EXTENSIONS as well as
CONFIG_NET_TC_SKB_EXT being disabled.

Fixes: Fixes: 8550ff8d8c ("skbuff: Release nfct refcount on napi stolen or re-used skbs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 00:07:14 -07:00
Dan Carpenter
271dbc3184 sock: unlock on error in sock_setsockopt()
If copy_from_sockptr() then we need to unlock before returning.

Fixes: d463126e23 ("net: sock: extend SO_TIMESTAMPING for PHC binding")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-07 20:49:12 -07:00
Paul Blakey
8550ff8d8c skbuff: Release nfct refcount on napi stolen or re-used skbs
When multiple SKBs are merged to a new skb under napi GRO,
or SKB is re-used by napi, if nfct was set for them in the
driver, it will not be released while freeing their stolen
head state or on re-use.

Release nfct on napi's stolen or re-used SKBs, and
in gro_list_prepare, check conntrack metadata diff.

Fixes: 5c6b946047 ("net/mlx5e: CT: Handle misses after executing CT action")
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06 10:26:29 -07:00
Eric Dumazet
81b4a0cc75 sock: fix error in sock_setsockopt()
Some tests are failing, John bisected the issue to a recent commit.

sock_set_timestamp() parameters should be :

1) sk
2) optname
3) valbool

Fixes: 371087aa47 ("sock: expose so_timestamp options for mptcp")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: John Sperbeck <jsperbeck@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-02 13:32:55 -07:00
Linus Torvalds
4cad671979 asm-generic/unaligned: Unify asm/unaligned.h around struct helper
The get_unaligned()/put_unaligned() helpers are traditionally architecture
 specific, with the two main variants being the "access-ok.h" version
 that assumes unaligned pointer accesses always work on a particular
 architecture, and the "le-struct.h" version that casts the data to a
 byte aligned type before dereferencing, for architectures that cannot
 always do unaligned accesses in hardware.
 
 Based on the discussion linked below, it appears that the access-ok
 version is not realiable on any architecture, but the struct version
 probably has no downsides. This series changes the code to use the
 same implementation on all architectures, addressing the few exceptions
 separately.
 
 Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/
 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363
 Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/
 Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2
 Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmDfFx4ACgkQmmx57+YA
 GNkqzRAAjdlIr8M+xI2CyT0/A9tswYfLMeWejmYopq3zlxI6RnvPiJJDIdY2I8US
 1npIiDo55w061CnXL9rV65ocL3XmGu1mabOvgM6ATsec+8t4WaXBV9tysxTJ9ea0
 ltLTa2P5DXWALvWiVMTME7hFaf1cW+8Uqt3LmXxDp2l5zasXajCHAH6YokON2PfM
 CsaRhwSxIu8Sbnu/IQGBI9JW5UXsBfKSyUwtM0OwP7jFOuIeZ4WBVA+j6UxONnFC
 wouKmAM/ThoOsaV9aP4EZLIfBx8d4/hfYQjZ958kYXurerruYkJeEqdIRbV0QqTy
 2O6ZrJ6uqPlzfWz9h458me2dt98YEtALHV/3DCWUcBfHmUQtxElyJYEhG0YjVF3H
 5RYtjw8Q2LS/QR5ask1Xn0JfT89rRnLi2migAtsA4Ce70JP4Us6wGobkj4SHlgDt
 P7+eVq2Mkhqw/kmV8N4p+ZS5lpkK0JniDN+ONDhkZqHL/zXG/HQzx9wLV69jlvo2
 ASevKxITdi+bKHWs5ANungkBOnBUQZacq46mVyi4HPDwMAFyWvVYTbFumy9koagQ
 o9NEgX3RsZcxxi7bU1xuFPFMLMlUQT3Nb30+84B4fKe9FmvHC1hizTiCnp7q4bZr
 z6a6AMHke7YLqKZOqzTJGRR3lPoZZDCb775SAd70LQp6XPZXOHs=
 =IY5U
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm/unaligned.h unification from Arnd Bergmann:
 "Unify asm/unaligned.h around struct helper

  The get_unaligned()/put_unaligned() helpers are traditionally
  architecture specific, with the two main variants being the
  "access-ok.h" version that assumes unaligned pointer accesses always
  work on a particular architecture, and the "le-struct.h" version that
  casts the data to a byte aligned type before dereferencing, for
  architectures that cannot always do unaligned accesses in hardware.

  Based on the discussion linked below, it appears that the access-ok
  version is not realiable on any architecture, but the struct version
  probably has no downsides. This series changes the code to use the
  same implementation on all architectures, addressing the few
  exceptions separately"

Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363
Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/
Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2
Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/

* tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: simplify asm/unaligned.h
  asm-generic: uaccess: 1-byte access is always aligned
  netpoll: avoid put_unaligned() on single character
  mwifiex: re-fix for unaligned accesses
  apparmor: use get_unaligned() only for multi-byte words
  partitions: msdos: fix one-byte get_unaligned()
  asm-generic: unaligned always use struct helpers
  asm-generic: unaligned: remove byteshift helpers
  powerpc: use linux/unaligned/le_struct.h on LE power7
  m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
  sh: remove unaligned access for sh4a
  openrisc: always use unaligned-struct header
  asm-generic: use asm-generic/unaligned.h for most architectures
2021-07-02 12:43:40 -07:00
Yangbo Lu
d463126e23 net: sock: extend SO_TIMESTAMPING for PHC binding
Since PTP virtual clock support is added, there can be
several PTP virtual clocks based on one PTP physical
clock for timestamping.

This patch is to extend SO_TIMESTAMPING API to support
PHC (PTP Hardware Clock) binding by adding a new flag
SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are
in use, user space can configure to bind one for
timestamping, but PTP physical clock is not supported
and not needed to bind.

This patch is preparation for timestamp conversion from
raw timestamp to a specific PTP virtual clock time in
core net.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01 13:08:18 -07:00
Eric Dumazet
0dbffbb533 net: annotate data race around sk_ll_usec
sk_ll_usec is read locklessly from sk_can_busy_loop()
while another thread can change its value in sock_setsockopt()

This is correct but needs annotations.

BUG: KCSAN: data-race in __skb_try_recv_datagram / sock_setsockopt

write to 0xffff88814eb5f904 of 4 bytes by task 14011 on cpu 0:
 sock_setsockopt+0x1287/0x2090 net/core/sock.c:1175
 __sys_setsockopt+0x14f/0x200 net/socket.c:2100
 __do_sys_setsockopt net/socket.c:2115 [inline]
 __se_sys_setsockopt net/socket.c:2112 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2112
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88814eb5f904 of 4 bytes by task 14001 on cpu 1:
 sk_can_busy_loop include/net/busy_poll.h:41 [inline]
 __skb_try_recv_datagram+0x14f/0x320 net/core/datagram.c:273
 unix_dgram_recvmsg+0x14c/0x870 net/unix/af_unix.c:2101
 unix_seqpacket_recvmsg+0x5a/0x70 net/unix/af_unix.c:2067
 ____sys_recvmsg+0x15d/0x310 include/linux/uio.h:244
 ___sys_recvmsg net/socket.c:2598 [inline]
 do_recvmmsg+0x35c/0x9f0 net/socket.c:2692
 __sys_recvmmsg net/socket.c:2771 [inline]
 __do_sys_recvmmsg net/socket.c:2794 [inline]
 __se_sys_recvmmsg net/socket.c:2787 [inline]
 __x64_sys_recvmmsg+0xcf/0x150 net/socket.c:2787
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000000 -> 0x00000101

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 14001 Comm: syz-executor.3 Not tainted 5.13.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01 11:23:50 -07:00
Linus Torvalds
dbe69e4337 Networking changes for 5.14.
Core:
 
  - BPF:
    - add syscall program type and libbpf support for generating
      instructions and bindings for in-kernel BPF loaders (BPF loaders
      for BPF), this is a stepping stone for signed BPF programs
    - infrastructure to migrate TCP child sockets from one listener
      to another in the same reuseport group/map to improve flexibility
      of service hand-off/restart
    - add broadcast support to XDP redirect
 
  - allow bypass of the lockless qdisc to improving performance
    (for pktgen: +23% with one thread, +44% with 2 threads)
 
  - add a simpler version of "DO_ONCE()" which does not require
    jump labels, intended for slow-path usage
 
  - virtio/vsock: introduce SOCK_SEQPACKET support
 
  - add getsocketopt to retrieve netns cookie
 
  - ip: treat lowest address of a IPv4 subnet as ordinary unicast address
        allowing reclaiming of precious IPv4 addresses
 
  - ipv6: use prandom_u32() for ID generation
 
  - ip: add support for more flexible field selection for hashing
        across multi-path routes (w/ offload to mlxsw)
 
  - icmp: add support for extended RFC 8335 PROBE (ping)
 
  - seg6: add support for SRv6 End.DT46 behavior
 
  - mptcp:
     - DSS checksum support (RFC 8684) to detect middlebox meddling
     - support Connection-time 'C' flag
     - time stamping support
 
  - sctp: packetization Layer Path MTU Discovery (RFC 8899)
 
  - xfrm: speed up state addition with seq set
 
  - WiFi:
     - hidden AP discovery on 6 GHz and other HE 6 GHz improvements
     - aggregation handling improvements for some drivers
     - minstrel improvements for no-ack frames
     - deferred rate control for TXQs to improve reaction times
     - switch from round robin to virtual time-based airtime scheduler
 
  - add trace points:
     - tcp checksum errors
     - openvswitch - action execution, upcalls
     - socket errors via sk_error_report
 
 Device APIs:
 
  - devlink: add rate API for hierarchical control of max egress rate
             of virtual devices (VFs, SFs etc.)
 
  - don't require RCU read lock to be held around BPF hooks
    in NAPI context
 
  - page_pool: generic buffer recycling
 
 New hardware/drivers:
 
  - mobile:
     - iosm: PCIe Driver for Intel M.2 Modem
     - support for Qualcomm MSM8998 (ipa)
 
  - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
 
  - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
 
  - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
 
  - NXP SJA1110 Automotive Ethernet 10-port switch
 
  - Qualcomm QCA8327 switch support (qca8k)
 
  - Mikrotik 10/25G NIC (atl1c)
 
 Driver changes:
 
  - ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
    (our first foray into MAC/PHY description via ACPI)
 
  - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
 
  - Mellanox/Nvidia NIC (mlx5)
    - NIC VF offload of L2 bridging
    - support IRQ distribution to Sub-functions
 
  - Marvell (prestera):
     - add flower and match all
     - devlink trap
     - link aggregation
 
  - Netronome (nfp): connection tracking offload
 
  - Intel 1GE (igc): add AF_XDP support
 
  - Marvell DPU (octeontx2): ingress ratelimit offload
 
  - Google vNIC (gve): new ring/descriptor format support
 
  - Qualcomm mobile (rmnet & ipa): inline checksum offload support
 
  - MediaTek WiFi (mt76)
     - mt7915 MSI support
     - mt7915 Tx status reporting
     - mt7915 thermal sensors support
     - mt7921 decapsulation offload
     - mt7921 enable runtime pm and deep sleep
 
  - Realtek WiFi (rtw88)
     - beacon filter support
     - Tx antenna path diversity support
     - firmware crash information via devcoredump
 
  - Qualcomm 60GHz WiFi (wcn36xx)
     - Wake-on-WLAN support with magic packets and GTK rekeying
 
  - Micrel PHY (ksz886x/ksz8081): add cable test support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmDb+fUACgkQMUZtbf5S
 Irs2Jg//aqN0Q8CgIvYCVhPxQw1tY7pTAbgyqgBZ01vwjyvtIOgJiWzSfFEU84mX
 M8fcpFX5eTKrOyJ9S6UFfQ/JG114n3hjAxFFT4Hxk2gC1Tg0vHuFQTDHcUl28bUE
 mTm61e1YpdorILnv2k5JVQ/wu0vs5QKDrjcYcrcPnh+j93wvnPOgAfDBV95nZzjS
 OTt4q2fR8GzLcSYWWsclMbDNkzyTG50RW/0Yd6aGjr5QGvXfrMeXfUJNz533PMf/
 w5lNyjRKv+x9mdTZJzU0+msNUrZgUdRz7W8Ey8lD3hJZRE+D6/uU7FtsE8Mi3+uc
 HWxeZUyzA3YF1MfVl/eesbxyPT7S/OkLzk4O5B35FbqP0YltaP+bOjq1/nM3ce1/
 io9Dx9pIl/2JANUgRCAtLi8Z2dkvRoqTaBxZ/nPudCCljFwDwl6joTMJ7Ow22i5Y
 5aIkcXFmZq4LbJDiHvbTlqT7yiuaEvu2UK/23bSIg/K3nF4eAmkY9Y1EgiMf60OF
 78Ttw0wk2tUegwaS5MZnCniKBKDyl9gM2F6rbZ/IxQRR2LTXFc1B6gC+ynUxgXfh
 Ub8O++6qGYGYZ0XvQH4pzco79p3qQWBTK5beIp2eu6BOAjBVIXq4AibUfoQLACsu
 hX7jMPYd0kc3WFgUnKgQP8EnjFSwbf4XiaE7fIXvWBY8hzCw2h4=
 =LvtX
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - BPF:
      - add syscall program type and libbpf support for generating
        instructions and bindings for in-kernel BPF loaders (BPF loaders
        for BPF), this is a stepping stone for signed BPF programs
      - infrastructure to migrate TCP child sockets from one listener to
        another in the same reuseport group/map to improve flexibility
        of service hand-off/restart
      - add broadcast support to XDP redirect

   - allow bypass of the lockless qdisc to improving performance (for
     pktgen: +23% with one thread, +44% with 2 threads)

   - add a simpler version of "DO_ONCE()" which does not require jump
     labels, intended for slow-path usage

   - virtio/vsock: introduce SOCK_SEQPACKET support

   - add getsocketopt to retrieve netns cookie

   - ip: treat lowest address of a IPv4 subnet as ordinary unicast
     address allowing reclaiming of precious IPv4 addresses

   - ipv6: use prandom_u32() for ID generation

   - ip: add support for more flexible field selection for hashing
     across multi-path routes (w/ offload to mlxsw)

   - icmp: add support for extended RFC 8335 PROBE (ping)

   - seg6: add support for SRv6 End.DT46 behavior

   - mptcp:
      - DSS checksum support (RFC 8684) to detect middlebox meddling
      - support Connection-time 'C' flag
      - time stamping support

   - sctp: packetization Layer Path MTU Discovery (RFC 8899)

   - xfrm: speed up state addition with seq set

   - WiFi:
      - hidden AP discovery on 6 GHz and other HE 6 GHz improvements
      - aggregation handling improvements for some drivers
      - minstrel improvements for no-ack frames
      - deferred rate control for TXQs to improve reaction times
      - switch from round robin to virtual time-based airtime scheduler

   - add trace points:
      - tcp checksum errors
      - openvswitch - action execution, upcalls
      - socket errors via sk_error_report

  Device APIs:

   - devlink: add rate API for hierarchical control of max egress rate
     of virtual devices (VFs, SFs etc.)

   - don't require RCU read lock to be held around BPF hooks in NAPI
     context

   - page_pool: generic buffer recycling

  New hardware/drivers:

   - mobile:
      - iosm: PCIe Driver for Intel M.2 Modem
      - support for Qualcomm MSM8998 (ipa)

   - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices

   - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches

   - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)

   - NXP SJA1110 Automotive Ethernet 10-port switch

   - Qualcomm QCA8327 switch support (qca8k)

   - Mikrotik 10/25G NIC (atl1c)

  Driver changes:

   - ACPI support for some MDIO, MAC and PHY devices from Marvell and
     NXP (our first foray into MAC/PHY description via ACPI)

   - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx

   - Mellanox/Nvidia NIC (mlx5)
      - NIC VF offload of L2 bridging
      - support IRQ distribution to Sub-functions

   - Marvell (prestera):
      - add flower and match all
      - devlink trap
      - link aggregation

   - Netronome (nfp): connection tracking offload

   - Intel 1GE (igc): add AF_XDP support

   - Marvell DPU (octeontx2): ingress ratelimit offload

   - Google vNIC (gve): new ring/descriptor format support

   - Qualcomm mobile (rmnet & ipa): inline checksum offload support

   - MediaTek WiFi (mt76)
      - mt7915 MSI support
      - mt7915 Tx status reporting
      - mt7915 thermal sensors support
      - mt7921 decapsulation offload
      - mt7921 enable runtime pm and deep sleep

   - Realtek WiFi (rtw88)
      - beacon filter support
      - Tx antenna path diversity support
      - firmware crash information via devcoredump

   - Qualcomm WiFi (wcn36xx)
      - Wake-on-WLAN support with magic packets and GTK rekeying

   - Micrel PHY (ksz886x/ksz8081): add cable test support"

* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
  tcp: change ICSK_CA_PRIV_SIZE definition
  tcp_yeah: check struct yeah size at compile time
  gve: DQO: Fix off by one in gve_rx_dqo()
  stmmac: intel: set PCI_D3hot in suspend
  stmmac: intel: Enable PHY WOL option in EHL
  net: stmmac: option to enable PHY WOL with PMT enabled
  net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
  net: use netdev_info in ndo_dflt_fdb_{add,del}
  ptp: Set lookup cookie when creating a PTP PPS source.
  net: sock: add trace for socket errors
  net: sock: introduce sk_error_report
  net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
  net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
  net: dsa: include fdb entries pointing to bridge in the host fdb list
  net: dsa: include bridge addresses which are local in the host fdb list
  net: dsa: sync static FDB entries on foreign interfaces to hardware
  net: dsa: install the host MDB and FDB entries in the master's RX filter
  net: dsa: reference count the FDB addresses at the cross-chip notifier level
  net: dsa: introduce a separate cross-chip notifier type for host FDBs
  net: dsa: reference count the MDB entries at the cross-chip notifier level
  ...
2021-06-30 15:51:09 -07:00
Jakub Kicinski
b6df00789e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Trivial conflict in net/netfilter/nf_tables_api.c.

Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.

skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-29 15:45:27 -07:00
Vladimir Oltean
78ecc8903d net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
"Static" is a loaded word, and probably not what the author meant when
the code was written.

In particular, this looks weird:
$ bridge fdb add dev swp0 00:01:02:03:04:05 local        # totally fine, but
$ bridge fdb add dev swp0 00:01:02:03:04:05 static
[ 2020.708298] swp0: FDB only supports static addresses  # hmm what?

By looking at the implementation which uses dev_uc_add/dev_uc_del it is
absolutely clear that only local addresses are supported, and the proper
Network Unreachability Detection state is being used for this purpose
(user space indeed sets NUD_PERMANENT when local addresses are meant).
So it is just the message that is wrong, fix it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29 11:31:57 -07:00
Vladimir Oltean
23ac0b4216 net: use netdev_info in ndo_dflt_fdb_{add,del}
Use the more modern printk helper for network interfaces, which also
contains information about the associated struct device, and results in
overall shorter line lengths compared to printing an open-coded
dev->name.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29 11:31:57 -07:00
Alexander Aring
e6a3e44340 net: sock: add trace for socket errors
This patch will add tracers to trace inet socket errors only. A user
space monitor application can track connection errors indepedent from
socket lifetime and do additional handling. For example a cluster
manager can fence a node if errors occurs in a specific heuristic.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29 11:28:21 -07:00
Alexander Aring
e3ae2365ef net: sock: introduce sk_error_report
This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29 11:28:21 -07:00
Tanner Love
127d7355ab net: update netdev_rx_csum_fault() print dump only once
Printing this stack dump multiple times does not provide additional
useful information, and consumes time in the data path. Printing once
is sufficient.

Changes
  v2: Format indentation properly

Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28 15:54:57 -07:00
David S. Miller
e1289cfb63 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2021-06-28

The following pull-request contains BPF updates for your *net-next* tree.

We've added 37 non-merge commits during the last 12 day(s) which contain
a total of 56 files changed, 394 insertions(+), 380 deletions(-).

The main changes are:

1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney.

2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski.

3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev.

4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria.

5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards.

6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa.

7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi.

8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim.

9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young.

10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer.

11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski.

12) Fix up bpfilter startup log-level to info level, from Gary Lin.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28 15:28:03 -07:00
Jakub Kicinski
a78cae2476 xdp: Move the rxq_info.mem clearing to unreg_mem_model()
xdp_rxq_info_unreg() implicitly calls xdp_rxq_info_unreg_mem_model().
This may well be confusing to the driver authors, and lead to double free
if they call xdp_rxq_info_unreg_mem_model() before xdp_rxq_info_unreg()
(when mem model type == MEM_TYPE_PAGE_POOL).

In fact error path of mvpp2_rxq_init() seems to currently do exactly that.

The double free will result in refcount underflow in page_pool_destroy().
Make the interface a little more programmer friendly by clearing type and
id so that xdp_rxq_info_unreg_mem_model() can be called multiple times.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210625221612.2637086-1-kuba@kernel.org
2021-06-28 23:07:59 +02:00
Linus Torvalds
54a728dc5e Scheduler udpates for this cycle:
- Changes to core scheduling facilities:
 
     - Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
       coordinated scheduling across SMT siblings. This is a much
       requested feature for cloud computing platforms, to allow
       the flexible utilization of SMT siblings, without exposing
       untrusted domains to information leaks & side channels, plus
       to ensure more deterministic computing performance on SMT
       systems used by heterogenous workloads.
 
       There's new prctls to set core scheduling groups, which
       allows more flexible management of workloads that can share
       siblings.
 
     - Fix task->state access anti-patterns that may result in missed
       wakeups and rename it to ->__state in the process to catch new
       abuses.
 
  - Load-balancing changes:
 
      - Tweak newidle_balance for fair-sched, to improve
        'memcache'-like workloads.
 
      - "Age" (decay) average idle time, to better track & improve workloads
        such as 'tbench'.
 
      - Fix & improve energy-aware (EAS) balancing logic & metrics.
 
      - Fix & improve the uclamp metrics.
 
      - Fix task migration (taskset) corner case on !CONFIG_CPUSET.
 
      - Fix RT and deadline utilization tracking across policy changes
 
      - Introduce a "burstable" CFS controller via cgroups, which allows
        bursty CPU-bound workloads to borrow a bit against their future
        quota to improve overall latencies & batching. Can be tweaked
        via /sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
 
      - Rework assymetric topology/capacity detection & handling.
 
  - Scheduler statistics & tooling:
 
      - Disable delayacct by default, but add a sysctl to enable
        it at runtime if tooling needs it. Use static keys and
        other optimizations to make it more palatable.
 
      - Use sched_clock() in delayacct, instead of ktime_get_ns().
 
  - Misc cleanups and fixes.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmDZcPoRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1g3yw//WfhIqy7Psa9d/MBMjQDRGbTuO4+w22Dj
 vmWFU44Q4KJxQHWeIgUlrK+dzvYWvNmflUs2CUUOiDVzxFTHMIyBtL4qCBUbx4Ns
 vKAcB9wsWZge2o3WzZqpProRhdoRaSKw8egUr2q7rACVBkckY7eGP/OjWxXU8BdA
 b7D0LPWwuIBFfN4pFYeCDLn32Dqr9s6Chyj+ZecabdG7EE6Gu+f1diVcxy7JE/mc
 4WWL0D1RqdgpGrBEuMJIxPYekdrZiuy4jtEbztz5gbTBteN1cj3BLfqn0Pc/e6rO
 Vyuc5mXCAmzRVi18z6g6bsVl+IA/nrbErENB2OHOhOYtqiZxqGTd4GPWZszMyY17
 5AsEO5+5pcaBsy4gyp09qURggBu9zhJnMVmOI3rIHZkmkhwzc6uUJlyhDCTiFWOz
 3ZF3LjbZEyCKodMD8qMHbs3axIBpIfZqjzkvSKyFnvfXEGVytVse7NUuWtQ36u92
 GnURxVeYY1TDVXvE1Y8owNKMxknKQ6YRlypP7Dtbeo/qG6hShp0xmS7qDLDi0ybZ
 ZlK+bDECiVoDf3nvJo+8v5M82IJ3CBt4UYldeRJsa1YCK/FsbK8tp91fkEfnXVue
 +U6LPX0AmMpXacR5HaZfb3uBIKRw/QMdP/7RFtBPhpV6jqCrEmuqHnpPQiEVtxwO
 UmG7bt94Trk=
 =3VDr
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler udpates from Ingo Molnar:

 - Changes to core scheduling facilities:

    - Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
      coordinated scheduling across SMT siblings. This is a much
      requested feature for cloud computing platforms, to allow the
      flexible utilization of SMT siblings, without exposing untrusted
      domains to information leaks & side channels, plus to ensure more
      deterministic computing performance on SMT systems used by
      heterogenous workloads.

      There are new prctls to set core scheduling groups, which allows
      more flexible management of workloads that can share siblings.

    - Fix task->state access anti-patterns that may result in missed
      wakeups and rename it to ->__state in the process to catch new
      abuses.

 - Load-balancing changes:

    - Tweak newidle_balance for fair-sched, to improve 'memcache'-like
      workloads.

    - "Age" (decay) average idle time, to better track & improve
      workloads such as 'tbench'.

    - Fix & improve energy-aware (EAS) balancing logic & metrics.

    - Fix & improve the uclamp metrics.

    - Fix task migration (taskset) corner case on !CONFIG_CPUSET.

    - Fix RT and deadline utilization tracking across policy changes

    - Introduce a "burstable" CFS controller via cgroups, which allows
      bursty CPU-bound workloads to borrow a bit against their future
      quota to improve overall latencies & batching. Can be tweaked via
      /sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.

    - Rework assymetric topology/capacity detection & handling.

 - Scheduler statistics & tooling:

    - Disable delayacct by default, but add a sysctl to enable it at
      runtime if tooling needs it. Use static keys and other
      optimizations to make it more palatable.

    - Use sched_clock() in delayacct, instead of ktime_get_ns().

 - Misc cleanups and fixes.

* tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
  sched/doc: Update the CPU capacity asymmetry bits
  sched/topology: Rework CPU capacity asymmetry detection
  sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag
  psi: Fix race between psi_trigger_create/destroy
  sched/fair: Introduce the burstable CFS controller
  sched/uclamp: Fix uclamp_tg_restrict()
  sched/rt: Fix Deadline utilization tracking during policy change
  sched/rt: Fix RT utilization tracking during policy change
  sched: Change task_struct::state
  sched,arch: Remove unused TASK_STATE offsets
  sched,timer: Use __set_current_state()
  sched: Add get_current_state()
  sched,perf,kvm: Fix preemption condition
  sched: Introduce task_is_running()
  sched: Unbreak wakeups
  sched/fair: Age the average idle time
  sched/cpufreq: Consider reduced CPU capacity in energy calculation
  sched/fair: Take thermal pressure into account while estimating energy
  thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
  sched/fair: Return early from update_tg_cfs_load() if delta == 0
  ...
2021-06-28 12:14:19 -07:00
Linus Torvalds
a15286c63d Locking changes for this cycle:
- Core locking & atomics:
 
      - Convert all architectures to ARCH_ATOMIC: move every
        architecture to ARCH_ATOMIC, then get rid of ARCH_ATOMIC
        and all the transitory facilities and #ifdefs.
 
        Much reduction in complexity from that series:
 
            63 files changed, 756 insertions(+), 4094 deletions(-)
 
      - Self-test enhancements
 
  - Futexes:
 
      - Add the new FUTEX_LOCK_PI2 ABI, which is a variant that
        doesn't set FLAGS_CLOCKRT (.e. uses CLOCK_MONOTONIC).
 
        [ The temptation to repurpose FUTEX_LOCK_PI's implicit
          setting of FLAGS_CLOCKRT & invert the flag's meaning
          to avoid having to introduce a new variant was
          resisted successfully. ]
 
      - Enhance futex self-tests
 
  - Lockdep:
 
      - Fix dependency path printouts
      - Optimize trace saving
      - Broaden & fix wait-context checks
 
  - Misc cleanups and fixes.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmDZaEYRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hPdxAAiNCsxL6X1cZ8zqbWsvLefT9Zqhzgs5u6
 gdZele7PNibvbYdON26b5RUzuKfOW/hgyX6LKqr+AiNYTT9PGhcY+tycUr2PGk5R
 LMyhJWmmX5cUVPU92ky+z5hEHB2gr4XPJcvgpKKUL0XB1tBaSvy2DtgwPuhXOoT1
 1sCQfy63t71snt2RfEnibVW6xovwaA2lsqL81lLHJN4iRFWvqO498/m4+PWkylsm
 ig/+VT1Oz7t4wqu3NhTqNNZv+4K4W2asniyo53Dg2BnRm/NjhJtgg4jRibrb0ssb
 67Xdq6y8+xNBmEAKj+Re8VpMcu4aj346Ctk7d4gst2ah/Rc0TvqfH6mezH7oq7RL
 hmOrMBWtwQfKhEE/fDkng30nrVxc/98YXP0n2rCCa0ySsaF6b6T185mTcYDRDxFs
 BVNS58ub+zxrF9Zd4nhIHKaEHiL2ZdDimqAicXN0RpywjIzTQ/y11uU7I1WBsKkq
 WkPYs+FPHnX7aBv1MsuxHhb8sUXjG924K4JeqnjF45jC3sC1crX+N0jv4wHw+89V
 h4k20s2Tw6m5XGXlgGwMJh0PCcD6X22Vd9Uyw8zb+IJfvNTGR9Rp1Ec+1gMRSll+
 xsn6G6Uy9bcNU0SqKlBSfelweGKn4ZxbEPn76Jc8KWLiepuZ6vv5PBoOuaujWht9
 KAeOC5XdjMk=
 =tH//
 -----END PGP SIGNATURE-----

Merge tag 'locking-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking updates from Ingo Molnar:

 - Core locking & atomics:

     - Convert all architectures to ARCH_ATOMIC: move every architecture
       to ARCH_ATOMIC, then get rid of ARCH_ATOMIC and all the
       transitory facilities and #ifdefs.

       Much reduction in complexity from that series:

           63 files changed, 756 insertions(+), 4094 deletions(-)

     - Self-test enhancements

 - Futexes:

     - Add the new FUTEX_LOCK_PI2 ABI, which is a variant that doesn't
       set FLAGS_CLOCKRT (.e. uses CLOCK_MONOTONIC).

       [ The temptation to repurpose FUTEX_LOCK_PI's implicit setting of
         FLAGS_CLOCKRT & invert the flag's meaning to avoid having to
         introduce a new variant was resisted successfully. ]

     - Enhance futex self-tests

 - Lockdep:

     - Fix dependency path printouts

     - Optimize trace saving

     - Broaden & fix wait-context checks

 - Misc cleanups and fixes.

* tag 'locking-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  locking/lockdep: Correct the description error for check_redundant()
  futex: Provide FUTEX_LOCK_PI2 to support clock selection
  futex: Prepare futex_lock_pi() for runtime clock selection
  lockdep/selftest: Remove wait-type RCU_CALLBACK tests
  lockdep/selftests: Fix selftests vs PROVE_RAW_LOCK_NESTING
  lockdep: Fix wait-type for empty stack
  locking/selftests: Add a selftest for check_irq_usage()
  lockding/lockdep: Avoid to find wrong lock dep path in check_irq_usage()
  locking/lockdep: Remove the unnecessary trace saving
  locking/lockdep: Fix the dep path printing for backwards BFS
  selftests: futex: Add futex compare requeue test
  selftests: futex: Add futex wait test
  seqlock: Remove trailing semicolon in macros
  locking/lockdep: Reduce LOCKDEP dependency list
  locking/lockdep,doc: Improve readability of the block matrix
  locking/atomics: atomic-instrumented: simplify ifdeffery
  locking/atomic: delete !ARCH_ATOMIC remnants
  locking/atomic: xtensa: move to ARCH_ATOMIC
  locking/atomic: sparc: move to ARCH_ATOMIC
  locking/atomic: sh: move to ARCH_ATOMIC
  ...
2021-06-28 11:45:29 -07:00
Martynas Pumputis
e8b9eab992 net: retrieve netns cookie via getsocketopt
It's getting more common to run nested container environments for
testing cloud software. One of such examples is Kind [1] which runs a
Kubernetes cluster in Docker containers on a single host. Each container
acts as a Kubernetes node, and thus can run any Pod (aka container)
inside the former. This approach simplifies testing a lot, as it
eliminates complicated VM setups.

Unfortunately, such a setup breaks some functionality when cgroupv2 BPF
programs are used for load-balancing. The load-balancer BPF program
needs to detect whether a request originates from the host netns or a
container netns in order to allow some access, e.g. to a service via a
loopback IP address. Typically, the programs detect this by comparing
netns cookies with the one of the init ns via a call to
bpf_get_netns_cookie(NULL). However, in nested environments the latter
cannot be used given the Kubernetes node's netns is outside the init ns.
To fix this, we need to pass the Kubernetes node netns cookie to the
program in a different way: by extending getsockopt() with a
SO_NETNS_COOKIE option, the orchestrator which runs in the Kubernetes
node netns can retrieve the cookie and pass it to the program instead.

Thus, this is following up on Eric's commit 3d368ab87c ("net:
initialize net->net_cookie at netns setup") to allow retrieval via
SO_NETNS_COOKIE.  This is also in line in how we retrieve socket cookie
via SO_COOKIE.

  [1] https://kind.sigs.k8s.io/

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:13:05 -07:00
Toke Høiland-Jørgensen
782347b6bc xdp: Add proper __rcu annotations to redirect map entries
XDP_REDIRECT works by a three-step process: the bpf_redirect() and
bpf_redirect_map() helpers will lookup the target of the redirect and store
it (along with some other metadata) in a per-CPU struct bpf_redirect_info.
Next, when the program returns the XDP_REDIRECT return code, the driver
will call xdp_do_redirect() which will use the information thus stored to
actually enqueue the frame into a bulk queue structure (that differs
slightly by map type, but shares the same principle). Finally, before
exiting its NAPI poll loop, the driver will call xdp_do_flush(), which will
flush all the different bulk queues, thus completing the redirect.

Pointers to the map entries will be kept around for this whole sequence of
steps, protected by RCU. However, there is no top-level rcu_read_lock() in
the core code; instead drivers add their own rcu_read_lock() around the XDP
portions of the code, but somewhat inconsistently as Martin discovered[0].
However, things still work because everything happens inside a single NAPI
poll sequence, which means it's between a pair of calls to
local_bh_disable()/local_bh_enable(). So Paul suggested[1] that we could
document this intention by using rcu_dereference_check() with
rcu_read_lock_bh_held() as a second parameter, thus allowing sparse and
lockdep to verify that everything is done correctly.

This patch does just that: we add an __rcu annotation to the map entry
pointers and remove the various comments explaining the NAPI poll assurance
strewn through devmap.c in favour of a longer explanation in filter.c. The
goal is to have one coherent documentation of the entire flow, and rely on
the RCU annotations as a "standard" way of communicating the flow in the
map code (which can additionally be understood by sparse and lockdep).

The RCU annotation replacements result in a fairly straight-forward
replacement where READ_ONCE() becomes rcu_dereference_check(), WRITE_ONCE()
becomes rcu_assign_pointer() and xchg() and cmpxchg() gets wrapped in the
proper constructs to cast the pointer back and forth between __rcu and
__kernel address space (for the benefit of sparse). The one complication is
that xskmap has a few constructions where double-pointers are passed back
and forth; these simply all gain __rcu annotations, and only the final
reference/dereference to the inner-most pointer gets changed.

With this, everything can be run through sparse without eliciting
complaints, and lockdep can verify correctness even without the use of
rcu_read_lock() in the drivers. Subsequent patches will clean these up from
the drivers.

[0] https://lore.kernel.org/bpf/20210415173551.7ma4slcbqeyiba2r@kafai-mbp.dhcp.thefacebook.com/
[1] https://lore.kernel.org/bpf/20210419165837.GA975577@paulmck-ThinkPad-P17-Gen-1/

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210624160609.292325-6-toke@redhat.com
2021-06-24 19:41:15 +02:00
Maciej Żenczykowski
0bc919d3e0 bpf: Support all gso types in bpf_skb_change_proto()
Since we no longer modify gso_size, it is now theoretically
safe to not set SKB_GSO_DODGY and reset gso_segs to zero.

This also means the skb_is_gso_tcp() check should no longer
be necessary.

Unfortunately we cannot remove the skb_{decrease,increase}_gso_size()
helpers, as they are still used elsewhere:

  bpf_skb_net_grow() without BPF_F_ADJ_ROOM_FIXED_GSO
  bpf_skb_net_shrink() without BPF_F_ADJ_ROOM_FIXED_GSO
  net/core/lwt_bpf.c's handle_gso_type()

Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dongseok Yi <dseok.yi@samsung.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/20210617000953.2787453-3-zenczykowski@gmail.com
2021-06-24 15:57:44 +02:00
Maciej Żenczykowski
364745fbe9 bpf: Do not change gso_size during bpf_skb_change_proto()
This is technically a backwards incompatible change in behaviour, but I'm
going to argue that it is very unlikely to break things, and likely to fix
*far* more then it breaks.

In no particular order, various reasons follow:

(a) I've long had a bug assigned to myself to debug a super rare kernel crash
on Android Pixel phones which can (per stacktrace) be traced back to BPF clat
IPv6 to IPv4 protocol conversion causing some sort of ugly failure much later
on during transmit deep in the GSO engine, AFAICT precisely because of this
change to gso_size, though I've never been able to manually reproduce it. I
believe it may be related to the particular network offload support of attached
USB ethernet dongle being used for tethering off of an IPv6-only cellular
connection. The reason might be we end up with more segments than max permitted,
or with a GSO packet with only one segment... (either way we break some
assumption and hit a BUG_ON)

(b) There is no check that the gso_size is > 20 when reducing it by 20, so we
might end up with a negative (or underflowing) gso_size or a gso_size of 0.
This can't possibly be good. Indeed this is probably somehow exploitable (or
at least can result in a kernel crash) by delivering crafted packets and perhaps
triggering an infinite loop or a divide by zero... As a reminder: gso_size (MSS)
is related to MTU, but not directly derived from it: gso_size/MSS may be
significantly smaller then one would get by deriving from local MTU. And on
some NICs (which do loose MTU checking on receive, it may even potentially be
larger, for example my work pc with 1500 MTU can receive 1520 byte frames [and
sometimes does due to bugs in a vendor plat46 implementation]). Indeed even just
going from 21 to 1 is potentially problematic because it increases the number
of segments by a factor of 21 (think DoS, or some other crash due to too many
segments).

(c) It's always safe to not increase the gso_size, because it doesn't result in
the max packet size increasing.  So the skb_increase_gso_size() call was always
unnecessary for correctness (and outright undesirable, see later). As such the
only part which is potentially dangerous (ie. could cause backwards compatibility
issues) is the removal of the skb_decrease_gso_size() call.

(d) If the packets are ultimately destined to the local device, then there is
absolutely no benefit to playing around with gso_size. It only matters if the
packets will egress the device. ie. we're either forwarding, or transmitting
from the device.

(e) This logic only triggers for packets which are GSO. It does not trigger for
skbs which are not GSO. It will not convert a non-GSO MTU sized packet into a
GSO packet (and you don't even know what the MTU is, so you can't even fix it).
As such your transmit path must *already* be able to handle an MTU 20 bytes
larger then your receive path (for IPv4 to IPv6 translation) - and indeed 28
bytes larger due to IPv4 fragments. Thus removing the skb_decrease_gso_size()
call doesn't actually increase the size of the packets your transmit side must
be able to handle. ie. to handle non-GSO max-MTU packets, the IPv4/IPv6 device/
route MTUs must already be set correctly. Since for example with an IPv4 egress
MTU of 1500, IPv4 to IPv6 translation will already build 1520 byte IPv6 frames,
so you need a 1520 byte device MTU. This means if your IPv6 device's egress
MTU is 1280, your IPv4 route must be 1260 (and actually 1252, because of the
need to handle fragments). This is to handle normal non-GSO packets. Thus the
reduction is simply not needed for GSO packets, because when they're correctly
built, they will already be the right size.

(f) TSO/GSO should be able to exactly undo GRO: the number of packets (TCP
segments) should not be modified, so that TCP's MSS counting works correctly
(this matters for congestion control). If protocol conversion changes the
gso_size, then the number of TCP segments may increase or decrease. Packet loss
after protocol conversion can result in partial loss of MSS segments that the
sender sent. How's the sending TCP stack going to react to receiving ACKs/SACKs
in the middle of the segments it sent?

(g) skb_{decrease,increase}_gso_size() are already no-ops for GSO_BY_FRAGS
case (besides triggering WARN_ON_ONCE). This means you already cannot guarantee
that gso_size (and thus resulting packet MTU) is changed. ie. you must assume
it won't be changed.

(h) changing gso_size is outright buggy for UDP GSO packets, where framing
matters (I believe that's also the case for SCTP, but it's already excluded
by [g]).  So the only remaining case is TCP, which also doesn't want it
(see [f]).

(i) see also the reasoning on the previous attempt at fixing this
(commit fa7b83bf3b) which shows that the current
behaviour causes TCP packet loss:

  In the forwarding path GRO -> BPF 6 to 4 -> GSO for TCP traffic, the
  coalesced packet payload can be > MSS, but < MSS + 20.

  bpf_skb_proto_6_to_4() will upgrade the MSS and it can be > the payload
  length. After then tcp_gso_segment checks for the payload length if it
  is <= MSS. The condition is causing the packet to be dropped.

  tcp_gso_segment():
    [...]
    mss = skb_shinfo(skb)->gso_size;
    if (unlikely(skb->len <= mss)) goto out;
    [...]

Thus changing the gso_size is simply a very bad idea. Increasing is unnecessary
and buggy, and decreasing can go negative.

Fixes: 6578171a7f ("bpf: add bpf_skb_change_proto helper")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dongseok Yi <dseok.yi@samsung.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/CANP3RGfjLikQ6dg=YpBU0OeHvyv7JOki7CyOUS9modaXAi-9vQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210617000953.2787453-2-zenczykowski@gmail.com
2021-06-24 15:48:17 +02:00
Maciej Żenczykowski
ba47396e1c Revert "bpf: Check for BPF_F_ADJ_ROOM_FIXED_GSO when bpf_skb_change_proto"
This reverts commit fa7b83bf3b.

See the followup commit for the reasoning why I believe the appropriate
approach is to simply make this change without a flag, but it can basically
be summarized as using this helper without the flag is bug-prone or outright
buggy, and thus the default should be this new behaviour.

As this commit has only made it into net-next/master, but not into
any real release, such a backwards incompatible change is still ok.

Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dongseok Yi <dseok.yi@samsung.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/20210617000953.2787453-1-zenczykowski@gmail.com
2021-06-24 15:39:05 +02:00
Dmytro Linkin
a3e5e5797f devlink: Protect rate list with lock while switching modes
Devlink eswitch set command doesn't hold devlink->lock, which makes
possible race condition between rate list traversing and others devlink
rate KAPI calls, like devlink_rate_nodes_destroy().
Hold devlink lock while traversing the list.

Fixes: a8ecb93ef0 ("devlink: Introduce rate nodes")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-23 15:46:25 -07:00
Dmytro Linkin
ff99324ded devlink: Remove eswitch mode check for mode set call
When eswitch is disabled, querying its current mode results in error.
Due to this when trying to set the eswitch mode for mlx5 devices, it
fails to set the eswitch switchdev mode.
Hence remove such check.

Fixes: a8ecb93ef0 ("devlink: Introduce rate nodes")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-23 15:46:25 -07:00
Dmytro Linkin
1321ed5e76 devlink: Decrease refcnt of parent rate object on leaf destroy
Port functions, like SFs, can be deleted by the user when its leaf rate
object has parent node. In such case node refcnt won't be decreased
which blocks the node from deletion later.
Do simple refcnt decrease, since driver in cleanup stage. This:
1) assumes that driver took proper internal parent unset action;
2) allows to avoid nested callbacks call and deadlock.

Fixes: d755598450 ("devlink: Allow setting parent node of rate objects")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-23 15:46:25 -07:00
David S. Miller
c2f5c57d99 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2021-06-23

The following pull-request contains BPF updates for your *net* tree.

We've added 14 non-merge commits during the last 6 day(s) which contain
a total of 13 files changed, 137 insertions(+), 64 deletions(-).

Note that when you merge net into net-next, there is a small merge conflict
between 9f2470fbc4 ("skmsg: Improve udp_bpf_recvmsg() accuracy") from bpf
with c49661aa6f ("skmsg: Remove unused parameters of sk_msg_wait_data()")
from net-next. Resolution is to: i) net/ipv4/udp_bpf.c: take udp_msg_wait_data()
and remove err parameter from the function, ii) net/ipv4/tcp_bpf.c: take
tcp_msg_wait_data() and remove err parameter from the function, iii) for
net/core/skmsg.c and include/linux/skmsg.h: remove the sk_msg_wait_data()
implementation and its prototype in header.

The main changes are:

1) Fix BPF poke descriptor adjustments after insn rewrite, from John Fastabend.

2) Fix regression when using BPF_OBJ_GET with non-O_RDWR flags, from Maciej Żenczykowski.

3) Various bug and error handling fixes for UDP-related sock_map, from Cong Wang.

4) Fix patching of vmlinux BTF IDs with correct endianness, from Tony Ambardar.

5) Two fixes for TX descriptor validation in AF_XDP, from Magnus Karlsson.

6) Fix overflow in size calculation for bpf_map_area_alloc(), from Bui Quang Minh.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-23 14:12:14 -07:00
Kuniyuki Iwashima
55d444b310 tcp: Add stats for socket migration.
This commit adds two stats for the socket migration feature to evaluate the
effectiveness: LINUX_MIB_TCPMIGRATEREQ(SUCCESS|FAILURE).

If the migration fails because of the own_req race in receiving ACK and
sending SYN+ACK paths, we do not increment the failure stat. Then another
CPU is responsible for the req.

Link: https://lore.kernel.org/bpf/CAK6E8=cgFKuGecTzSCSQ8z3YJ_163C0uwO9yRvfDSE7vOe9mJA@mail.gmail.com/
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-23 12:56:08 -07:00
Yunsheng Lin
c4fef01ba4 net: sched: implement TCQ_F_CAN_BYPASS for lockless qdisc
Currently pfifo_fast has both TCQ_F_CAN_BYPASS and TCQ_F_NOLOCK
flag set, but queue discipline by-pass does not work for lockless
qdisc because skb is always enqueued to qdisc even when the qdisc
is empty, see __dev_xmit_skb().

This patch calls sch_direct_xmit() to transmit the skb directly
to the driver for empty lockless qdisc, which aviod enqueuing
and dequeuing operation.

As qdisc->empty is not reliable to indicate a empty qdisc because
there is a time window between enqueuing and setting qdisc->empty.
So we use the MISSED state added in commit a90c57f2ce ("net:
sched: fix packet stuck problem for lockless qdisc"), which
indicate there is lock contention, suggesting that it is better
not to do the qdisc bypass in order to avoid packet out of order
problem.

In order to make MISSED state reliable to indicate a empty qdisc,
we need to ensure that testing and clearing of MISSED state is
within the protection of qdisc->seqlock, only setting MISSED state
can be done without the protection of qdisc->seqlock. A MISSED
state testing is added without the protection of qdisc->seqlock to
aviod doing unnecessary spin_trylock() for contention case.

As the enqueuing is not within the protection of qdisc->seqlock,
there is still a potential data race as mentioned by Jakub [1]:

      thread1               thread2             thread3
qdisc_run_begin() # true
                        qdisc_run_begin(q)
                             set(MISSED)
pfifo_fast_dequeue
  clear(MISSED)
  # recheck the queue
qdisc_run_end()
                            enqueue skb1
                                             qdisc empty # true
                                          qdisc_run_begin() # true
                                          sch_direct_xmit() # skb2
                         qdisc_run_begin()
                            set(MISSED)

When above happens, skb1 enqueued by thread2 is transmited after
skb2 is transmited by thread3 because MISSED state setting and
enqueuing is not under the qdisc->seqlock. If qdisc bypass is
disabled, skb1 has better chance to be transmited quicker than
skb2.

This patch does not take care of the above data race, because we
view this as similar as below:
Even at the same time CPU1 and CPU2 write the skb to two socket
which both heading to the same qdisc, there is no guarantee that
which skb will hit the qdisc first, because there is a lot of
factor like interrupt/softirq/cache miss/scheduling afffecting
that.

There are below cases that need special handling:
1. When MISSED state is cleared before another round of dequeuing
   in pfifo_fast_dequeue(), and __qdisc_run() might not be able to
   dequeue all skb in one round and call __netif_schedule(), which
   might result in a non-empty qdisc without MISSED set. In order
   to avoid this, the MISSED state is set for lockless qdisc and
   __netif_schedule() will be called at the end of qdisc_run_end.

2. The MISSED state also need to be set for lockless qdisc instead
   of calling __netif_schedule() directly when requeuing a skb for
   a similar reason.

3. For netdev queue stopped case, the MISSED case need clearing
   while the netdev queue is stopped, otherwise there may be
   unnecessary __netif_schedule() calling. So a new DRAINING state
   is added to indicate this case, which also indicate a non-empty
   qdisc.

4. As there is already netif_xmit_frozen_or_stopped() checking in
   dequeue_skb() and sch_direct_xmit(), which are both within the
   protection of qdisc->seqlock, but the same checking in
   __dev_xmit_skb() is without the protection, which might cause
   empty indication of a lockless qdisc to be not reliable. So
   remove the checking in __dev_xmit_skb(), and the checking in
   the protection of qdisc->seqlock seems enough to avoid the cpu
   consumption problem for netdev queue stopped case.

1. https://lkml.org/lkml/2021/5/29/215

Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # flexcan
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-23 12:17:35 -07:00
Bui Quang Minh
7dd5d437c2 bpf: Fix integer overflow in argument calculation for bpf_map_area_alloc
In 32-bit architecture, the result of sizeof() is a 32-bit integer so
the expression becomes the multiplication between 2 32-bit integer which
can potentially leads to integer overflow. As a result,
bpf_map_area_alloc() allocates less memory than needed.

Fix this by casting 1 operand to u64.

Fixes: 0d2c4f9640 ("bpf: Eliminate rlimit-based memory accounting for sockmap and sockhash maps")
Fixes: 99c51064fb ("devmap: Use bpf_map_area_alloc() for allocating hash buckets")
Fixes: 546ac1ffb7 ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210613143440.71975-1-minhquangbui99@gmail.com
2021-06-22 10:14:29 -07:00
Sebastian Andrzej Siewior
2b4cd14fd9 net/netif_receive_skb_core: Use migrate_disable()
The preempt disable around do_xdp_generic() has been introduced in
commit
   bbbe211c29 ("net: rcu lock and preempt disable missing around generic xdp")

For BPF it is enough to use migrate_disable() and the code was updated
as it can be seen in commit
   3c58482a38 ("bpf: Provide bpf_prog_run_pin_on_cpu() helper")

This is a leftover which was not converted.

Use migrate_disable() before invoking do_xdp_generic().

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:08:02 -07:00
Cong Wang
781dd0431e skmsg: Increase sk->sk_drops when dropping packets
It is hard to observe packet drops without increasing relevant
drop counters, here we should increase sk->sk_drops which is
a protocol-independent counter. Fortunately psock is always
associated with a struct sock, we can just use psock->sk.

Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-9-xiyou.wangcong@gmail.com
2021-06-21 16:48:44 +02:00
Cong Wang
42830571f1 skmsg: Pass source psock to sk_psock_skb_redirect()
sk_psock_skb_redirect() only takes skb as a parameter, we
will need to know where this skb is from, so just pass
the source psock to this function as a new parameter.
This patch prepares for the next one.

Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-8-xiyou.wangcong@gmail.com
2021-06-21 16:48:41 +02:00
Cong Wang
1581a6c1c3 skmsg: Teach sk_psock_verdict_apply() to return errors
Currently sk_psock_verdict_apply() is void, but it handles some
error conditions too. Its caller is impossible to learn whether
it succeeds or fails, especially sk_psock_verdict_recv().

Make it return int to indicate error cases and propagate errors
to callers properly.

Fixes: ef5659280e ("bpf, sockmap: Allow skipping sk_skb parser program")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-7-xiyou.wangcong@gmail.com
2021-06-21 16:48:37 +02:00