Implement the prepare() and complete() callbacks for power management,
initialize s0_suspend flag at prepare(), and reset it at complete().
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a suspend_ignored flag to snd_sof_pcm_stream that will be used to
decide if the corresponding FW pipeline should be kept active to perform
always on tasks when the system is entering the S0ix state.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For compact IPCs, we will send the IPC header/command via the HIPCIDR
register and the first 32bit payload via the HIPCIDD register, no
mailbox will be used.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add snd_sof_set_d0_substate() helper for setting ADSP to a specific D0
substate, it will call into the platform specific implementation, and
update the d0_substate at success.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The configuration for D0ix in FW is platform specific, let's do this and
send IPC in the platform set_power_state() ops.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On cAVS platforms, some IPCs are required to be sent via IPC registers
only(e.g. when in D0i3, mailbox is unaccessible), add hda-ipc.h to hold
definition of those compact IPCs.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Memory windows could be powered off before receiving PM_GATE IPC reply
from FW, we can't read the mailbox to get reply.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The helper sof_send_pm_ipc() is only suitable for context save/restore
IPCs' sending, so rename it to sof_send_pm_ctx_ipc here.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parses the token from tplg file and store it to snd_sof_pcm_stream
d0i3_compatible flag, which can be used later for d0ix transition
management.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add stream token SOF_TKN_STREAM_PLAYBACK_COMPATIBLE_D0I3 and
SOF_TKN_STREAM_CAPTURE_COMPATIBLE_D0I3 to denote if the stream can be
opened at low power d0i3 status or not.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add flag d0i3_compatible to struct snd_sof_pcm_stream to denote if the
stream can tolerate a transition to the D0i3 substate while opened (thus
seen as 'active' by pm_runtime).
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using hda_dsp_set_power_state() as set_power_state() ops for apl to do
d0ix platform configuration updates.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using hda_dsp_set_power_state() as set_power_state() ops for cnl to do
d0ix platform configuration updates.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding helper to implement setting dsp to d0i3 or d0i0 status, this will
be needed for driver D0ix support.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
D0i3 is a platform-defined substate of D0, so we need a
platform-specific callback in dsp_ops to handle the relevant
configurations.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We initialize/reset d0_substate to default d0i0 value when doing
transition D3-->D0, e.g. at success of probing and resuming.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add field d0_substate to struct snd_sof_dev to store the current DSP
D0 sub-state(only meaningful when DSP in D0), which could be D0I0 or
D0I3.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
chan > 8 or chan < 0 shouldn't happen.
This patch uses WARN_ON() for such case.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2x530a4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
xrun may happen at the end of stream, the
trigger->fsl_esai_trigger_stop maybe called in the middle of
fsl_esai_hw_reset, this may cause esai in wrong state
after stop, and there may be endless xrun interrupt.
This issue may also happen with trigger->fsl_esai_trigger_start.
So Add spin lock to lock those functions.
Fixes: 7ccafa2b38 ("ASoC: fsl_esai: recover the channel swap after xrun")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/52e92c4221a83e39a84a6cd92fc3d5479b44894c.1572252321.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The output divider should align with the output sample
rate, if use ideal sample rate, there will be a lot of overload,
which would cause underrun.
The maximum divider of asrc clock is 1024, but there is no
judgement for this limitation in driver, which may cause the divider
setting not correct.
For non-ideal ratio mode, the clock rate should divide the sample
rate with no remainder, and the quotient should be less than 1024.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/23c634e4bf58afce5b3ae67f5f42e8d1cae2639a.1572252307.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The first DMIC capture always fail (zero sequence data from PCM port)
after using DSP hotwording function (i.e. Google assistant).
This rt5514 codec requires to control mclk directly in the set_bias_level
function. Implement this function in machine driver to control the
ssp1_mclk clock explicitly could fix this issue.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1571994691-20199-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4ac85de997 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops") removed
fsl_dma_ops but left a usage, leading to a build error for some
configs, eg. mpc85xx_defconfig:
sound/soc/fsl/fsl_dma.c: In function ‘fsl_soc_dma_probe’:
sound/soc/fsl/fsl_dma.c:905:18: error: ‘fsl_dma_ops’ undeclared (first use in this function)
dma->dai.ops = &fsl_dma_ops;
^~~~~~~~~~~
Remove the usage to fix the build.
Fixes: 4ac85de997 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191025051353.2878-1-mpe@ellerman.id.au
Signed-off-by: Mark Brown <broonie@kernel.org>
The current position update is not precise enough for PulseAudio to
work reliably with the timer-based scheduling on Baytrail,
Cherrytrail, Broadwell.
Disable the NO_PERIOD_WAKEUP capability and use BATCH to signal that
the position is only reliable and updated during period_elapsed
events.
This will be reverted when the firmware provides a more accurate
position for those platforms.
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191024210318.30068-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the INFO_ flags such as PAUSE/NO_PERIOD_WAKEUP are defined
in the SOF PCM core, which doesn't scale. To account for platform
variations, these flags need to be set in DSP ops.
This patch only moves the definitions and does not change any
functionality.
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191024210318.30068-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We see odd FIFO overruns with this, we assume the best thing to do is
to disable the RX I2S frontend first, and then disable the FIFO that
is using it.
This also fixes an issue where using multi-word frames (TDM) have
partial samples stuck in the FIFO which then get read out when the
next capture is started.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-5-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a callback to configure TDM settings for the Tegra30 I2S ASoC 'platform'
driver.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: merge fix for power management]
[ben.dooks@codethink.co.uk: add review change for fsync of 1 clock]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
The tegra3 audio can support 24 and 32 bit sample sizes so add the
option to the tegra30_i2s_hw_params to configure the S24_LE or S32_LE
formats when requested.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: fixup merge of 24 and 32bit]
[ben.dooks@codethink.co.uk: add pm calls around ytdm config]
[ben.dooks@codethink.co.uk: drop debug printing to dev_dbg]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-3-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix bugs reported by kbuild test robot
Fixes: a0e0d13542 ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191024184026.183913-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The allocation of rt5677_dsp can potentially fail and return null, so add
a null check and return -ENOMEM on a memory allocation failure.
Addresses-Coverity: ("Dereference null return")
Fixes: a0e0d13542 ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191024124610.18182-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add platform specific data for Kahlee project.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191023212948.92246-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Kconfig, PCI ID and chip info for JSL platform.
The DSP only has 2 cores for this platform.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022194705.23347-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Such traces should be extremely rare but extremely useful for debug.
Report errors for all calls to sdn_sof_dsp_read_poll_timeout(), but
only on negative values for consistency.
Add traces that enable each timeout to be uniquely identified.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022192844.21022-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a ROM timeout is detected, we still stop the DMA but will return
the initial error should the DMA stop also fail.
Likewise the cleanup is handled regardless of the status, but we
return the initial error.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022192844.21022-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=y,
below errors can be seen:
sound/soc/codecs/cros_ec_codec.o: In function `send_ec_host_command':
cros_ec_codec.c:(.text+0x534): undefined reference to `cros_ec_cmd_xfer_status'
cros_ec_codec.c:(.text+0x101c): undefined reference to `cros_ec_get_host_event'
This is because it will select SND_SOC_CROS_EC_CODEC
after commit 2cc3cd5fdc ("ASoC: mediatek: mt8183: support WoV"),
but SND_SOC_CROS_EC_CODEC depends on CROS_EC.
Fixes: 2cc3cd5fdc ("ASoC: mediatek: mt8183: support WoV")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Link: https://lore.kernel.org/r/20191023063103.44941-1-maowenan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing of_node_put() for
rsnd_parse_tdm_split_mode()
rsnd_parse_connect_graph()
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736fkyzx8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to R-Car3 HW manual 40.3.3 (Data Format on Audio Local Bus),
in case of monaural data writing or reading through Audio-DMAC,
it's always in Left Justified format, so both src and dst
DMA Bus width should be equal to physical data width.
Therefore set src and dst's DMA bus width to:
- [monaural case] data width
- [non-monaural case] 32bits (as prior applying the patch)
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191022185518.12838-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has for_each_rtdcom() which is link list for
rtd-component which is called as rtdcom. The relationship image is like below
rtdcom rtdcom rtdcom
component component component
rtd->component_list -> list -> list -> list ...
Here, the pointer get via normal link list is rtdcom,
Thus, current for_each loop is like below, and need to get
component via rtdcom->component
for_each_rtdcom(rtd, rtdcom) {
component = rtdcom->component;
...
}
but usually, user want to get pointer from for_each_xxx is component
directly, like below.
for_each_rtd_component(rtd, rtdcom, component) {
...
}
This patch expands list_for_each_entry manually, and enable to get
component directly from for_each macro.
Because of it, the macro becoming difficult to read,
but macro itself becoming useful.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878spm64m4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_remove_link_components() will be called from
soc_cleanup_card_resources(). This patch removes duplicate call.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e5664lz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_prune_paths() is checking widget at 2 parts.
(A) is for CPU, (B) is for Codec.
If we focus to (A) part, continue at (a) is for (1) loop. But,
if we focus to (B) part, continue at (b) is for (2) loop, not for (1).
This is bug.
This patch fixup this issue.
static int dpcm_prune_paths(...)
{
...
(1) for_each_dpcm_be(fe, stream, dpcm) {
...
^ widget = dai_get_widget(...);
|
(A) if (widget && widget_in_list(...))
| (a) continue;
v
^ (2) for_each_rtd_codec_dai(...) {
| widget = dai_get_widget(...);
(B)
| if (widget && widget_in_list(...))
v (b) continue;
}
...
Fixes: 2e5894d737 ("ASoC: pcm: Add support for DAI multicodec")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blui64mf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements a PCM interface for streaming hotword
phrases over SPI. Userspace can open the PCM device at anytime.
The stream is blocked when no hotword is detected. The mic
audio buffer on the DSP is a ~128KByte ring buffer that holds
~4sec of audio samples recorded from the DMIC (S16_LE, mono,
16KHz). After a hotword is detected, previous 2 seconds of audio
(containing the detected hotword) is streamed first, then live
capture continues until userspace closes the PCM stream.
When transferring, copy one period at a time then call
snd_pcm_period_elapsed(). This reduces the latency of transferring
the initial ~2sec of audio after hotword detect since audio samples
are available for userspace earlier.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191018200449.141123-2-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
