Commit Graph

879 Commits

Author SHA1 Message Date
Patrick McHardy
c01003c205 [IFB]: Fix crash on input device removal
The input_device pointer is not refcounted, which means the device may
disappear while packets are queued, causing a crash when ifb passes packets
with a stale skb->dev pointer to netif_rx().

Fix by storing the interface index instead and do a lookup where neccessary.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-29 11:46:52 -07:00
Jeff Garzik
a9c87a10db Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes 2007-03-28 02:21:18 -04:00
Jean Tourrilhes
c2805fbb86 [PATCH] WE-22 : prevent information leak on 64 bit
Johannes Berg discovered that kernel space was leaking to
userspace on 64 bit platform. He made a first patch to fix that. This
is an improved version of his patch.

Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-27 14:10:26 -04:00
David S. Miller
f11e6659ce [IPV6]: Fix routing round-robin locking.
As per RFC2461, section 6.3.6, item #2, when no routers on the
matching list are known to be reachable or probably reachable we
do round robin on those available routes so that we make sure
to probe as many of them as possible to detect when one becomes
reachable faster.

Each routing table has a rwlock protecting the tree and the linked
list of routes at each leaf.  The round robin code executes during
lookup and thus with the rwlock taken as a reader.  A small local
spinlock tries to provide protection but this does not work at all
for two reasons:

1) The round-robin list manipulation, as coded, goes like this (with
   read lock held):

	walk routes finding head and tail

	spin_lock();
	rotate list using head and tail
	spin_unlock();

   While one thread is rotating the list, another thread can
   end up with stale values of head and tail and then proceed
   to corrupt the list when it gets the lock.  This ends up causing
   the OOPS in fib6_add() later onthat many people have been hitting.

2) All the other code paths that run with the rwlock held as
   a reader do not expect the list to change on them, they
   expect it to remain completely fixed while they hold the
   lock in that way.

So, simply stated, it is impossible to implement this correctly using
a manipulation of the list without violating the rwlock locking
semantics.

Reimplement using a per-fib6_node round-robin pointer.  This way we
don't need to manipulate the list at all, and since the round-robin
pointer can only ever point to real existing entries we don't need
to perform any locking on the changing of the round-robin pointer
itself.  We only need to reset the round-robin pointer to NULL when
the entry it is pointing to is removed.

The idea is from Thomas Graf and it is very similar to how this
was implemented before the advanced router selection code when in.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25 18:48:05 -07:00
Alexey Kuznetsov
ecbb416939 [NET]: Fix neighbour destructor handling.
->neigh_destructor() is killed (not used), replaced with
->neigh_cleanup(), which is called when neighbor entry goes to dead
state. At this point everything is still valid: neigh->dev,
neigh->parms etc.

The device should guarantee that dead neighbor entries (neigh->dead !=
0) do not get private part initialized, otherwise nobody will cleanup
it.

I think this is enough for ipoib which is the only user of this thing.
Initialization private part of neighbor entries happens in ipib
start_xmit routine, which is not reached when device is down.  But it
would be better to add explicit test for neigh->dead in any case.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25 18:48:01 -07:00
Thomas Graf
e1701c68c1 [NET]: Fix fib_rules compatibility breakage
Based upon a patch from Patrick McHardy.

The fib_rules netlink attribute policy introduced in 2.6.19 broke
userspace compatibilty. When specifying a rule with "from all"
or "to all", iproute adds a zero byte long netlink attribute,
but the policy requires all addresses to have a size equal to
sizeof(struct in_addr)/sizeof(struct in6_addr), resulting in a
validation error.

Check attribute length of FRA_SRC/FRA_DST in the generic framework
by letting the family specific rules implementation provide the
length of an address. Report an error if address length is non
zero but no address attribute is provided. Fix actual bug by
checking address length for non-zero instead of relying on
availability of attribute.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25 18:48:00 -07:00
Vlad Yasevich
749bf9215e [SCTP]: Reset some transport and association variables on restart
If the association has been restarted, we need to reset the
transport congestion variables as well as accumulated error
counts and CACC variables.  If we do not, the association
will use the wrong values and may terminate prematurely.

This was found with a scenario where the peer restarted
the association when lksctp was in the last HB timeout for
its association.  The restart happened, but the error counts
have not been reset and when the timeout occurred, a newly
restarted association was terminated due to excessive
retransmits.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-20 00:09:45 -07:00
Vlad Yasevich
0b58a81146 [SCTP]: Clean up stale data during association restart
During association restart we may have stale data sitting
on the ULP queue waiting for ordering or reassembly.  This
data may cause severe problems if not cleaned up.  In particular
stale data pending ordering may cause problems with receive
window exhaustion if our peer has decided to restart the
association.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-20 00:09:43 -07:00
Eric Paris
ef41aaa0b7 [IPSEC]: xfrm_policy delete security check misplaced
The security hooks to check permissions to remove an xfrm_policy were
actually done after the policy was removed.  Since the unlinking and
deletion are done in xfrm_policy_by* functions this moves the hooks
inside those 2 functions.  There we have all the information needed to
do the security check and it can be done before the deletion.  Since
auditing requires the result of that security check err has to be passed
back and forth from the xfrm_policy_by* functions.

This patch also fixes a bug where a deletion that failed the security
check could cause improper accounting on the xfrm_policy
(xfrm_get_policy didn't have a put on the exit path for the hold taken
by xfrm_policy_by*)

It also fixes the return code when no policy is found in
xfrm_add_pol_expire.  In old code (at least back in the 2.6.18 days) err
wasn't used before the return when no policy is found and so the
initialization would cause err to be ENOENT.  But since err has since
been used above when we don't get a policy back from the xfrm_policy_by*
function we would always return 0 instead of the intended ENOENT.  Also
fixed some white space damage in the same area.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Venkat Yekkirala <vyekkirala@trustedcs.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-07 16:08:09 -08:00
David S. Miller
64a146513f [NET]: Revert incorrect accept queue backlog changes.
This reverts two changes:

8488df894d
248f06726e

A backlog value of N really does mean allow "N + 1" connections
to queue to a listening socket.  This allows one to specify
"0" as the backlog and still get 1 connection.

Noticed by Gerrit Renker and Rick Jones.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-06 11:21:05 -08:00
Eric Dumazet
187f5f84ef [INET]: twcal_jiffie should be unsigned long, not int
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-05 13:32:48 -08:00
Patrick McHardy
ec68e97ded [NETFILTER]: conntrack: fix {nf,ip}_ct_iterate_cleanup endless loops
Fix {nf,ip}_ct_iterate_cleanup unconfirmed list handling:

- unconfirmed entries can not be killed manually, they are removed on
  confirmation or final destruction of the conntrack entry, which means
  we might iterate forever without making forward progress.

  This can happen in combination with the conntrack event cache, which
  holds a reference to the conntrack entry, which is only released when
  the packet makes it all the way through the stack or a different
  packet is handled.

- taking references to an unconfirmed entry and using it outside the
  locked section doesn't work, the list entries are not refcounted and
  another CPU might already be waiting to destroy the entry

What the code really wants to do is make sure the references of the hash
table to the selected conntrack entries are released, so they will be
destroyed once all references from skbs and the event cache are dropped.

Since unconfirmed entries haven't even entered the hash yet, simply mark
them as dying and skip confirmation based on that.

Reported and tested by Chuck Ebbert <cebbert@redhat.com>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-05 13:25:18 -08:00
Wei Dong
8488df894d [NET]: Fix bugs in "Whether sock accept queue is full" checking
when I use linux TCP socket, and find there is a bug in function
sk_acceptq_is_full().

	When a new SYN comes, TCP module first checks its validation. If valid,
send SYN,ACK to the client and add the sock to the syn hash table. Next
time if received the valid ACK for SYN,ACK from the client. server will
accept this connection and increase the sk->sk_ack_backlog -- which is
done in function tcp_check_req().We check wether acceptq is full in
function tcp_v4_syn_recv_sock().

Consider an example:

 After listen(sockfd, 1) system call, sk->sk_max_ack_backlog is set to
1. As we know, sk->sk_ack_backlog is initialized to 0. Assuming accept()
system call is not invoked now.

1. 1st connection comes. invoke sk_acceptq_is_full(). sk-
>sk_ack_backlog=0 sk->sk_max_ack_backlog=1, function return 0 accept
this connection. Increase the sk->sk_ack_backlog
2. 2nd connection comes. invoke sk_acceptq_is_full(). sk-
>sk_ack_backlog=1 sk->sk_max_ack_backlog=1, function return 0 accept
this connection. Increase the sk->sk_ack_backlog
3. 3rd connection comes. invoke sk_acceptq_is_full(). sk-
>sk_ack_backlog=2 sk->sk_max_ack_backlog=1, function return 1. Refuse
this connection.

I think it has bugs. after listen system call. sk->sk_max_ack_backlog=1
but now it can accept 2 connections.

Signed-off-by: Wei Dong <weid@np.css.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02 20:37:33 -08:00
Patrick McHardy
4498121ca3 [NET]: Handle disabled preemption in gfp_any()
ctnetlink uses netlink_unicast from an atomic_notifier_chain
(which is called within a RCU read side critical section)
without holding further locks. netlink_unicast calls netlink_trim
with the result of gfp_any() for the gfp flags, which are passed
down to pskb_expand_header. gfp_any() only checks for softirq
context and returns GFP_KERNEL, resulting in this warning:

BUG: sleeping function called from invalid context at mm/slab.c:3032
in_atomic():1, irqs_disabled():0
no locks held by rmmod/7010.

Call Trace:
 [<ffffffff8109467f>] debug_show_held_locks+0x9/0xb
 [<ffffffff8100b0b4>] __might_sleep+0xd9/0xdb
 [<ffffffff810b5082>] __kmalloc+0x68/0x110
 [<ffffffff811ba8f2>] pskb_expand_head+0x4d/0x13b
 [<ffffffff81053147>] netlink_broadcast+0xa5/0x2e0
 [<ffffffff881cd1d7>] :nfnetlink:nfnetlink_send+0x83/0x8a
 [<ffffffff8834f6a6>] :nf_conntrack_netlink:ctnetlink_conntrack_event+0x94c/0x96a
 [<ffffffff810624d6>] notifier_call_chain+0x29/0x3e
 [<ffffffff8106251d>] atomic_notifier_call_chain+0x32/0x60
 [<ffffffff881d266d>] :nf_conntrack:destroy_conntrack+0xa5/0x1d3
 [<ffffffff881d194e>] :nf_conntrack:nf_ct_cleanup+0x8c/0x12c
 [<ffffffff881d4614>] :nf_conntrack:kill_l3proto+0x0/0x13
 [<ffffffff881d482a>] :nf_conntrack:nf_conntrack_l3proto_unregister+0x90/0x94
 [<ffffffff883551b3>] :nf_conntrack_ipv4:nf_conntrack_l3proto_ipv4_fini+0x2b/0x5d
 [<ffffffff8109d44f>] sys_delete_module+0x1b5/0x1e6
 [<ffffffff8105f245>] trace_hardirqs_on_thunk+0x35/0x37
 [<ffffffff8105911e>] system_call+0x7e/0x83

Since netlink_unicast is supposed to be callable from within RCU
read side critical sections, make gfp_any() check for in_atomic()
instead of in_softirq().

Additionally nfnetlink_send needs to use gfp_any() as well for the
call to netlink_broadcast).

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-28 09:42:13 -08:00
Adrian Bunk
a39a21982c [IRDA] net/irda/: proper prototypes
This patch adds proper prototypes for some functions in
include/net/irda/irda.h

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-26 11:42:43 -08:00
Kazunori MIYAZAWA
73d605d1ab [IPSEC]: changing API of xfrm6_tunnel_register
This patch changes xfrm6_tunnel register and deregister
interface to prepare for solving the conflict of device
tunnels with inter address family IPsec tunnel.
There is no device which conflicts with IPv4 over IPv6
IPsec tunnel.

Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-13 12:55:55 -08:00
Kazunori MIYAZAWA
c0d56408e3 [IPSEC]: Changing API of xfrm4_tunnel_register.
This patch changes xfrm4_tunnel register and deregister
interface to prepare for solving the conflict of device
tunnels with inter address family IPsec tunnel.

Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-13 12:54:47 -08:00
Patrick McHardy
fe3eb20c1a [NETFILTER]: nf_conntrack: change nf_conntrack_l[34]proto_unregister to void
No caller checks the return value, and since its usually called within the
module unload path there's nothing a module could do about errors anyway,
so BUG on invalid conditions and return void.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-12 11:14:28 -08:00
Patrick McHardy
c0e912d7ed [NETFILTER]: nf_conntrack: fix invalid conntrack statistics RCU assumption
NF_CT_STAT_INC assumes rcu_read_lock in nf_hook_slow disables
preemption as well, making it legal to use __get_cpu_var without
disabling preemption manually. The assumption is not correct anymore
with preemptable RCU, additionally we need to protect against softirqs
when not holding nf_conntrack_lock.

Add NF_CT_STAT_INC_ATOMIC macro, which disables local softirqs,
and use where necessary.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-12 11:13:43 -08:00
Patrick McHardy
923f4902fe [NETFILTER]: nf_conntrack: properly use RCU API for nf_ct_protos/nf_ct_l3protos arrays
Replace preempt_{enable,disable} based RCU by proper use of the
RCU API and add missing rcu_read_lock/rcu_read_unlock calls in
all paths not obviously only used within packet process context
(nfnetlink_conntrack).
  
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-12 11:12:57 -08:00
Arjan van de Ven
540473208f [PATCH] mark struct file_operations const 1
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:44 -08:00
Eric Dumazet
1e19e02ca0 [NET]: Reorder fields of struct dst_entry
This last patch (but not least :) ) finally moves the next pointer at
the end of struct dst_entry. This permits to perform route cache
lookups with a minimal cost of one cache line per entry, instead of
two.

Both 32bits and 64bits platforms benefit from this new layout.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:45 -08:00
Eric Dumazet
0c195c3fc4 [DECNET]: Convert decnet route to use the new dst_entry 'next' pointer
This patch removes the next pointer from 'struct dn_route.u' union,
and renames u.rt_next to u.dst.dn_next.

It also moves 'struct flowi' right after 'struct dst_entry' to prepare
speedup lookups.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:43 -08:00
Eric Dumazet
7cc482634f [IPV6]: Convert ipv6 route to use the new dst_entry 'next' pointer
This patch removes the next pointer from 'struct rt6_info.u' union,
and renames u.next to u.dst.rt6_next.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:40 -08:00
Eric Dumazet
093c2ca416 [IPV4]: Convert ipv4 route to use the new dst_entry 'next' pointer
This patch removes the rt_next pointer from 'struct rtable.u' union,
and renames u.rt_next to u.dst_rt_next.

It also moves 'struct flowi' right after 'struct dst_entry' to prepare
the gain on lookups.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:38 -08:00
Eric Dumazet
75ce7ceaa1 [NET]: Introduce union in struct dst_entry to hold 'next' pointer
This patch introduces an anonymous union to nicely express the fact that all
objects inherited from struct dst_entry should access to the generic 'next'
pointer but with appropriate type verification.

This patch is a prereq before following patches.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:36 -08:00
Eric Dumazet
dbca9b2750 [NET]: change layout of ehash table
ehash table layout is currently this one :

First half of this table is used by sockets not in TIME_WAIT state
Second half of it is used by sockets in TIME_WAIT state.

This is non optimal because of for a given hash or socket, the two chain heads 
are located in separate cache lines.
Moreover the locks of the second half are never used.

If instead of this halving, we use two list heads in inet_ehash_bucket instead 
of only one, we probably can avoid one cache miss, and reduce ram usage, 
particularly if sizeof(rwlock_t) is big (various CONFIG_DEBUG_SPINLOCK, 
CONFIG_DEBUG_LOCK_ALLOC settings). So we still halves the table but we keep 
together related chains to speedup lookups and socket state change.

In this patch I did not try to align struct inet_ehash_bucket, but a future 
patch could try to make this structure have a convenient size (a power of two 
or a multiple of L1_CACHE_SIZE).
I guess rwlock will just vanish as soon as RCU is plugged into ehash :) , so 
maybe we dont need to scratch our heads to align the bucket...

Note : In case struct inet_ehash_bucket is not a power of two, we could 
probably change alloc_large_system_hash() (in case it use __get_free_pages()) 
to free the unused space. It currently allocates a big zone, but the last 
quarter of it could be freed. Again, this should be a temporary 'problem'.

Patch tested on ipv4 tcp only, but should be OK for IPV6 and DCCP.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08 14:16:46 -08:00
Jennifer Hunt
eac3731bd0 [S390]: Add AF_IUCV socket support
From: Jennifer Hunt <jenhunt@us.ibm.com>

This patch adds AF_IUCV socket support.

Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08 13:51:54 -08:00
Martin Schwidefsky
2356f4cb19 [S390]: Rewrite of the IUCV base code, part 2
Add rewritten IUCV base code to net/iucv.

Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08 13:37:42 -08:00
Andrew Hendry
39e21c0d34 [X.25]: Adds /proc/sys/net/x25/x25_forward to control forwarding.
echo "1" > /proc/sys/net/x25/x25_forward 
To turn on x25_forwarding, defaults to off
Requires the previous patch.

Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08 13:34:36 -08:00
Andrew Hendry
95a9dc4390 [X.25]: Add call forwarding
Adds call forwarding to X.25, allowing it to operate like an X.25 router.
Useful if one needs to manipulate X.25 traffic with tools like tc.
This is an update/cleanup based off a patch submitted by Daniel Ferenci a few years ago.

Thanks Alan for the feedback.
Added the null check to the clones.
Moved the skb_clone's into the forwarding functions.

Worked ok with Cisco XoT, linux X.25 back to back, and some old NTUs/PADs.

Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08 13:34:02 -08:00
Shinta Sugimoto
80c9abaabf [XFRM]: Extension for dynamic update of endpoint address(es)
Extend the XFRM framework so that endpoint address(es) in the XFRM
databases could be dynamically updated according to a request (MIGRATE
message) from user application. Target XFRM policy is first identified
by the selector in the MIGRATE message. Next, the endpoint addresses
of the matching templates and XFRM states are updated according to
the MIGRATE message.

Signed-off-by: Shinta Sugimoto <shinta.sugimoto@ericsson.com>
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08 13:11:42 -08:00
Eric Leblond
41f4689a7c [NETFILTER]: NAT: optional source port randomization support
This patch adds support to NAT to randomize source ports.

Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08 12:39:17 -08:00
Michal Schmidt
6fecd19851 [NETFILTER]: Add SANE connection tracking helper
This is nf_conntrack_sane, a netfilter connection tracking helper module
for the SANE protocol used by the 'saned' daemon to make scanners available
via network. The SANE protocol uses separate control & data connections,
similar to passive FTP. The helper module is needed to recognize the data
connection as RELATED to the control one.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08 12:39:09 -08:00
Miika Komu
cdca72652a [IPSEC]: exporting xfrm_state_afinfo
This patch exports xfrm_state_afinfo.

Signed-off-by: Miika Komu <miika@iki.fi>
Signed-off-by: Diego Beltrami <Diego.Beltrami@hiit.fi>
Signed-off-by: Kazunori Miyazawa <miyazawa@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08 12:39:00 -08:00
David S. Miller
8eb9086f21 [IPV4/IPV6]: Always wait for IPSEC SA resolution in socket contexts.
Do this even for non-blocking sockets.  This avoids the silly -EAGAIN
that applications can see now, even for non-blocking sockets in some
cases (f.e. connect()).

With help from Venkat Tekkirala.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08 12:38:45 -08:00
Frederik Deweerdt
ba7808eac1 [TCP]: remove tcp header from tcp_v4_check (take #2)
The tcphdr struct passed to tcp_v4_check is not used, the following
patch removes it from the parameter list.

This adds the netfilter modifications missing in the patch I sent
for rc3-mm1.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08 12:38:44 -08:00
David S. Miller
e89862f4c5 [TCP]: Restore SKB socket owner setting in tcp_transmit_skb().
Revert 931731123a

We can't elide the skb_set_owner_w() here because things like certain
netfilter targets (such as owner MATCH) need a socket to be set on the
SKB for correct operation.

Thanks to Jan Engelhardt and other netfilter list members for
pointing this out.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-26 01:04:55 -08:00
Vlad Yasevich
610ab73ac4 [SCTP]: Correctly handle unexpected INIT-ACK chunk.
Consider the chunk as Out-of-the-Blue if we don't have
an endpoint.  Otherwise discard it as before.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-23 20:25:46 -08:00
Mikael Pettersson
16d807988f [NETFILTER]: fix xt_state compile failure
In file included from net/netfilter/xt_state.c:13:
include/net/netfilter/nf_conntrack_compat.h: In function 'nf_ct_l3proto_try_module_get':
include/net/netfilter/nf_conntrack_compat.h:70: error: 'PF_INET' undeclared (first use in this function)
include/net/netfilter/nf_conntrack_compat.h:70: error: (Each undeclared identifier is reported only once
include/net/netfilter/nf_conntrack_compat.h:70: error: for each function it appears in.)
include/net/netfilter/nf_conntrack_compat.h:71: warning: control reaches end of non-void function
make[2]: *** [net/netfilter/xt_state.o] Error 1
make[1]: *** [net/netfilter] Error 2
make: *** [net] Error 2

A simple fix is to have nf_conntrack_compat.h #include <linux/socket.h>.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-23 20:25:43 -08:00
Jeff Garzik
11897539a9 Merge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes 2007-01-07 22:44:56 -05:00
Gerrit Renker
0d630cc0a6 [TCP]: Use old definition of before
This reverts the new (unambiguous) definition of the TCP `before'
relation. As pointed out in an example by Herbert Xu, there is 
existing code which implicitly requires the old definition in order
to work correctly.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-04 12:25:16 -08:00
Adrian Bunk
7f18ba6248 [X25]: proper prototype for x25_init_timers()
This patch adds a proper prototype for x25_init_timers() in 
include/net/x25.h

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-03 18:48:13 -08:00
Zhu Yi
3eb546057d [PATCH] ieee80211: WLAN_GET_SEQ_SEQ fix (select correct region)
The WLAN_GET_SEQ_SEQ(seq) macro in ieee80211 is selecting the wrong region.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-01-02 20:56:26 -05:00
Al Viro
b23e353666 [IPV6]: Dumb typo in generic csum_ipv6_magic()
... duh

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-22 11:12:07 -08:00
Adrian Bunk
24123186fa [SCTP]: make 2 functions static
This patch makes the following needlessly global functions static:
- ipv6.c: sctp_inet6addr_event()
- protocol.c: sctp_inetaddr_event()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-22 11:12:05 -08:00
Ivan Skytte Jorgensen
0f3fffd8ab [SCTP]: Fix typo adaption -> adaptation as per the latest API draft.
Signed-off-by: Ivan Skytte Jorgensen <isj-sctp@i1.dk>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-22 11:12:04 -08:00
Gerrit Renker
9a036b9c33 [TCP]: Fix ambiguity in the `before' relation.
While looking at DCCP sequence numbers, I stumbled over a problem with
the following definition of before in tcp.h:

static inline int before(__u32 seq1, __u32 seq2)
{
        return (__s32)(seq1-seq2) < 0;
}

Problem: This definition suffers from an an ambiguity, i.e. always

           before(a, (a + 2^31) % 2^32)) = 1
           before((a + 2^31) % 2^32), a) = 1

         In text: when the difference between a and b amounts to 2^31,
         a is always considered `before' b, the function can not decide.
         The reason is that implicitly 0 is `before' 1 ... 2^31-1 ... 2^31

Solution: There is a simple fix, by defining before in such a way that
          0 is no longer `before' 2^31, i.e. 0 `before' 1 ... 2^31-1
          By not using the middle between 0 and 2^32, before can be made
          unambiguous.
          This is achieved by testing whether seq2-seq1 > 0 (using signed
          32-bit arithmetic).

I attach a patch to codify this. Also the `after' relation is basically
a redefinition of `before', it is now defined as a macro after before.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-22 11:12:01 -08:00
Ralf Baechle
a3d384029a [AX.25]: Fix unchecked rose_add_loopback_neigh uses
rose_add_loopback_neigh uses kmalloc and the callers were ignoring the
error value.  Rewrite to let the caller deal with the allocation.  This
allows the use of static allocation of kmalloc use entirely.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17 21:59:14 -08:00
Ralf Baechle
a4282717c1 [AX.25]: Fix unchecked ax25_linkfail_register uses
ax25_linkfail_register uses kmalloc and the callers were ignoring the
error value.  Rewrite to let the caller deal with the allocation.  This
allows the use of static allocation of kmalloc use entirely.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17 21:59:11 -08:00