The Mediatek accelerator driver calls into a dynamically allocated
skcipher of the ctr(aes) variety to perform GCM key derivation, which
involves AES encryption of a single block consisting of NUL bytes.
There is no point in using the skcipher API for this, so use the AES
library interface instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the sahara driver implements asynchronous versions of
ecb(aes) and cbc(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.
Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the qce driver implements asynchronous versions of ecb(aes),
cbc(aes)and xts(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.
Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.
While at it, remove the pointless memset() from qce_skcipher_init(), and
remove the call to it qce_skcipher_init_fallback().
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the picoxcell driver implements asynchronous versions of
ecb(aes) and cbc(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.
Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the mxs-dcp driver implements asynchronous versions of
ecb(aes) and cbc(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.
Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the chelsio driver implements asynchronous versions of
cbc(aes) and xts(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.
Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the ccp driver implements an asynchronous version of xts(aes),
the fallback it allocates is required to be synchronous. Given that SIMD
based software implementations are usually asynchronous as well, even
though they rarely complete asynchronously (this typically only happens
in cases where the request was made from softirq context, while SIMD was
already in use in the task context that it interrupted), these
implementations are disregarded, and either the generic C version or
another table based version implemented in assembler is selected instead.
Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the sun8i-ss driver implements asynchronous versions of
ecb(aes) and cbc(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.
Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the sun8i-ce driver implements asynchronous versions of
ecb(aes) and cbc(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.
Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the sun4i driver implements asynchronous versions of ecb(aes)
and cbc(aes), the fallbacks it allocates are required to be synchronous.
Given that SIMD based software implementations are usually asynchronous
as well, even though they rarely complete asynchronously (this typically
only happens in cases where the request was made from softirq context,
while SIMD was already in use in the task context that it interrupted),
these implementations are disregarded, and either the generic C version
or another table based version implemented in assembler is selected
instead.
Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the omap-aes driver implements asynchronous versions of
ecb(aes), cbc(aes) and ctr(aes), the fallbacks it allocates are required
to be synchronous. Given that SIMD based software implementations are
usually asynchronous as well, even though they rarely complete
asynchronously (this typically only happens in cases where the request was
made from softirq context, while SIMD was already in use in the task
context that it interrupted), these implementations are disregarded, and
either the generic C version or another table based version implemented in
assembler is selected instead.
Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the amlogic-gxl driver implements asynchronous versions of
ecb(aes) and cbc(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.
Since falling back to synchronous AES is not only a performance issue,
but potentially a security issue as well (due to the fact that table
based AES is not time invariant), let's fix this, by allocating an
ordinary skcipher as the fallback, and invoke it with the completion
routine that was given to the outer request.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AmLogic GXL crypto accelerator driver is built into the kernel if
ARCH_MESON is set. However, given the single image policy of arm64, its
defconfig enables all platforms by default, and so ARCH_MESON is usually
enabled.
This means that the AmLogic driver causes the arm64 defconfig build to
pull in a huge chunk of the crypto stack as a builtin as well, which is
undesirable, so let's make the amlogic GXL driver default to 'm' instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are multiple things in this file that requires kernel.h but
it's only included through other header files indirectly. This
patch adds a direct inclusion as those indirect inclusions may go
away at any point.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify some log output interfaces and
update author information
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update debugfs interface parameters, and adjust the
processing logic inside the corresponding function
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Updates the initialization and reset of SEC driver's
register operation.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As before, if a SEC queue is at the 'fake busy' status,
the request with a 'fake busy' flag will be sent into hardware
and the sending function returns busy. After the request is
finished, SEC driver's call back will identify the 'fake busy' flag,
and notifies the user that hardware is not busy now by calling
user's call back function.
Now, a request sent into busy hardware will be cached in the
SEC queue's backlog, return '-EBUSY' to user.
After the request being finished, the cached requests will
be processed in the call back function. to notify the
corresponding user that SEC queue can process more requests.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC debug registers aren't cleared even if its driver is removed,
so add a clearing operation in driver removing.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Of the two versions of GHASH that the ARM driver implements, only one
performs aggregation, and so the other one has no use for the powers
of H to be precomputed, or space to be allocated for them in the key
struct. So make the context size dependent on which version is being
selected, and while at it, use a static key to carry this decision,
and get rid of the function pointer.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce an inline wrapper for ghash_do_update() that incorporates
the indirect call to the asm routine that is passed as an argument,
and keep the non-SIMD fallback code out of line. This ensures that
all references to the function pointer are inlined where the address
is taken, removing the need for any indirect calls to begin with.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the ghash and gcm drivers are split, we no longer need to allocate
a key struct for the former that carries powers of H that are only used by
the latter. Also, take this opportunity to clean up the code a little bit.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The remaining ghash implementation does not support aggregation, and so
there is no point in including the precomputed powers of H in the key
struct. So move that into the GCM setkey routine, and get rid of the
shared sub-routine entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are two ways to implement SIMD accelerated GCM on arm64:
- using the PMULL instructions for carryless 64x64->128 multiplication,
in which case the architecture guarantees that the AES instructions are
available as well, and so we can use the AEAD implementation that combines
both,
- using the PMULL instructions for carryless 8x8->16 bit multiplication,
which is implemented as a shash, and can be combined with any ctr(aes)
implementation by the generic GCM AEAD template driver.
So let's drop the 64x64->128 shash driver, which is never needed for GCM,
and not suitable for use anywhere else.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If users don't specify NUMA node, the driver will use the ZIP module near
the CPU allocating acomp. Otherwise, it uses the ZIP module according to
the requirement of users.
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For a Linux server with NUMA, there are possibly multiple (de)compressors
which are either local or remote to some NUMA node. Some drivers will
automatically use the (de)compressor near the CPU calling acomp_alloc().
However, it is not necessarily correct because users who send acomp_req
could be from different NUMA node with the CPU which allocates acomp.
Just like kernel has kmalloc() and kmalloc_node(), here crypto can have
same support.
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When building with LLVM_IAS=1 means using Clang's Integrated Assembly (IAS)
from LLVM/Clang >= v10.0.1-rc1+ instead of GNU/as from GNU/binutils
I see the following breakage in Debian/testing AMD64:
<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
^
arch/x86/crypto/aesni-intel_asm.S:1598:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_dec %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
^
arch/x86/crypto/aesni-intel_asm.S:1599:2: note: while in macro instantiation
GCM_ENC_DEC dec
^
<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
^
arch/x86/crypto/aesni-intel_asm.S:1686:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_enc %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
^
arch/x86/crypto/aesni-intel_asm.S:1687:2: note: while in macro instantiation
GCM_ENC_DEC enc
Craig Topper suggested me in ClangBuiltLinux issue #1050:
> I think the "too many positional arguments" is because the parser isn't able
> to handle the trailing commas.
>
> The "unknown use of instruction mnemonic" is because the macro was named
> GHASH_4_ENCRYPT_4_PARALLEL_DEC but its being instantiated with
> GHASH_4_ENCRYPT_4_PARALLEL_dec I guess gas ignores case on the
> macro instantiation, but llvm doesn't.
First, I removed the trailing comma in the PRECOMPUTE line.
Second, I substituted:
1. GHASH_4_ENCRYPT_4_PARALLEL_DEC -> GHASH_4_ENCRYPT_4_PARALLEL_dec
2. GHASH_4_ENCRYPT_4_PARALLEL_ENC -> GHASH_4_ENCRYPT_4_PARALLEL_enc
With these changes I was able to build with LLVM_IAS=1 and boot on bare metal.
I confirmed that this works with Linux-kernel v5.7.5 final.
NOTE: This patch is on top of Linux v5.7 final.
Thanks to Craig and especially Nick for double-checking and his comments.
Suggested-by: Craig Topper <craig.topper@intel.com>
Suggested-by: Craig Topper <craig.topper@gmail.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: "ClangBuiltLinux" <clang-built-linux@googlegroups.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1050
Link: https://bugs.llvm.org/show_bug.cgi?id=24494
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a number of endianness marking issues in the ccp
driver.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some user-space programs rely on crypto requests that have no
control metadata. This broke when a check was added to require
the presence of control metadata with the ctx->init flag.
This patch fixes the regression by setting ctx->init as long as
one sendmsg(2) has been made, with or without a control message.
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: f3c802a1f3 ("crypto: algif_aead - Only wake up when...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
features[] and id_table[] are not modified and can be made const to
allow the compiler to put them in read-only memory.
Before:
text data bss dec hex filename
11534 2056 160 13750 35b6 drivers/crypto/virtio/virtio_crypto_core.o
After:
text data bss dec hex filename
11630 1992 128 13750 35b6 drivers/crypto/virtio/virtio_crypto_core.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
id_table[] is not modified and an be made const to allow the compiler to
put it in read-only memory.
Before:
text data bss dec hex filename
1746 192 8 1946 79a drivers/char/hw_random/virtio-rng.o
After:
text data bss dec hex filename
1762 176 8 1946 79a drivers/char/hw_random/virtio-rng.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
nmk_rng_ids[] is not modified and can be made const to allow the
compiler to put it in read-only memory.
Before:
text data bss dec hex filename
652 216 4 872 368 drivers/char/hw_random/nomadik-rng.o
After:
text data bss dec hex filename
676 192 4 872 368 drivers/char/hw_random/nomadik-rng.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
bcm2835_rng_devtype[] is not modified and can be made const to allow the
compiler to put it in read-only memory.
Before:
text data bss dec hex filename
2392 176 0 2568 a08 drivers/char/hw_random/bcm2835-rng.o
After:
text data bss dec hex filename
2464 104 0 2568 a08 drivers/char/hw_random/bcm2835-rng.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As HW_RANDOM_BA431 does not have any platform dependency, it should not
default to enabled.
Fixes: 0289e9be5d ("hwrng: ba431 - add support for BA431 hwrng")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ba431 driver depends on HAS_IOMEM and this was missing from
the Kconfig file.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 0289e9be5d ("hwrng: ba431 - add support for BA431 hwrng")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Forward requests to another provider if the key length for AES-XTS is
192 bits as this is not supported by the QAT accelerators.
This fixes the following issue reported with the option
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS:
alg: skcipher: qat_aes_xts setkey failed on test vector "random: len=3204 klen=48"; expected_error=0, actual_error=-22, flags=0x1
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove tfm field in qat_alg_skcipher_ctx structure.
This is not used.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Validate AES-XTS key using the function xts_verify_key() to prevent
malformed keys.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow AES-XTS requests that are not multiple of the block size.
If a request is smaller than the block size, return -EINVAL.
This fixes the following issue reported by the crypto testmgr self-test:
alg: skcipher: qat_aes_xts encryption failed on test vector "random: len=116 klen=64"; expected_error=0, actual_error=-22, cfg="random: inplace may_sleep use_finup src_divs=[<reimport>45.85%@+4077, <flush>54.15%@alignmask+18]"
Fixes: 96ee111a65 ("crypto: qat - return error for block...")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a bunch of sparse warnings by adding __force tags
when casting __iomem poitners to u64.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes an unused variable warning when this driver is
built-in with CONFIG_OF=n. While we're at it this patch also
expands the compiler coverage when CONFIG_OF is off by removing
all the CONFIG_OF ifdefs.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes an unused variable warning when this driver is
built-in with CONFIG_OF=n.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A recent change to the Regulator consumer API (which this driver
utilises) add prototypes for the some suspend functions. These
functions require including header file include/linux/suspend.h.
The following tree of includes affecting this driver will be
present:
In file included from include/linux/elevator.h:6,
from include/linux/blkdev.h:288,
from include/linux/blk-cgroup.h:23,
from include/linux/writeback.h:14,
from include/linux/memcontrol.h:22,
from include/linux/swap.h:9,
from include/linux/suspend.h:5,
from include/linux/regulator/consumer.h:35,
from drivers/crypto/ux500/hash/hash_core.c:28:
include/linux/elevator.h pulls in include/linux/hashtable.h which
contains its own version of hash_init(). This confuses the build
system and results in the following error (amongst others):
drivers/crypto/ux500/hash/hash_core.c:1362:19: error: passing argument 1 of '__hash_init' from incompatible pointer type [-Werror=incompatible-pointer-types]
1362 | return hash_init(req);
Fix this by namespacing the local hash_init() such that the
source of confusion is removed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
