Enable idmapped mounts for xfs. This basically just means passing down
the user_namespace argument from the VFS methods down to where it is
passed to the relevant helpers.
Note that full-filesystem bulkstat is not supported from inside idmapped
mounts as it is an administrative operation that acts on the whole file
system. The limitation is not applied to the bulkstat single operation
that just operates on a single inode.
Link: https://lore.kernel.org/r/20210121131959.646623-40-christian.brauner@ubuntu.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.
The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.
In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.
Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. Allow it to
handle idmapped mounts. If the inode is accessed through an idmapped
mount it according to the mount's user namespace. Afterwards the checks
are identical to non-idmapped mounts. If the initial user namespace is
passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Similarly, allow the inode_init_owner() helper to handle idmapped
mounts. It initializes a new inode on idmapped mounts by mapping the
fsuid and fsgid of the caller from the mount's user namespace. If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
In order to determine whether a caller holds privilege over a given
inode the capability framework exposes the two helpers
privileged_wrt_inode_uidgid() and capable_wrt_inode_uidgid(). The former
verifies that the inode has a mapping in the caller's user namespace and
the latter additionally verifies that the caller has the requested
capability in their current user namespace.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped inodes. If the initial user namespace is passed all
operations are a nop so non-idmapped mounts will not see a change in
behavior.
Link: https://lore.kernel.org/r/20210121131959.646623-5-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Pass a set of flags to iomap_dio_rw instead of the boolean
wait_for_completion argument. The IOMAP_DIO_FORCE_WAIT flag
replaces the wait_for_completion, but only needs to be passed
when the iocb isn't synchronous to start with to simplify the
callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
[djwong: rework xfs_file.c so that we can push iomap changes separately]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If the inode is not pinned by the time fsync is called we don't need the
ilock to protect against concurrent clearing of ili_fsync_fields as the
inode won't need a log flush or clearing of these fields. Not taking
the iolock allows for full concurrency of fsync and thus O_DSYNC
completions with io_uring/aio write submissions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Factor out the log syncing logic into two helpers to make the code easier
to read and more maintainable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Filesystem freeze cleans the log and immediately redirties it so log
recovery runs if a crash occurs after the filesystem is frozen. Now
that log quiesce covers the log, there is no need to clean the log and
redirty it to trigger log recovery because covering has the same
effect. Update xfs_fs_freeze() to quiesce (and thus cover) the log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
xfs_quiesce_attr() is now a wrapper for xfs_log_clean(). Remove it
and call xfs_log_clean() directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
These two calls are repeated at the beginning of xfs_log_quiesce().
Drop them from xfs_quiesce_attr().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
xfs_log_sbcount() calls xfs_sync_sb() to sync superblock counters to
disk when lazy superblock accounting is enabled. This occurs on
unmount, freeze, and read-only (re)mount and ensures the final
values are calculated and persisted to disk before each form of
quiesce completes.
Now that log covering occurs in all of these contexts and uses the
same xfs_sync_sb() mechanism to update log state, there is no need
to log the superblock separately for any reason. Update the log
quiesce path to sync the superblock at least once for any mount
where lazy superblock accounting is enabled. If the log is already
covered, it will remain in the covered state. Otherwise, the next
sync as part of the normal covering sequence will carry the
associated superblock update with it. Remove xfs_log_sbcount() now
that it is no longer needed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Now that log covering occurs on quiesce, we'd like to reuse the
underlying superblock sync for final superblock updates. This
includes things like lazy superblock counter updates, log feature
incompat bits in the future, etc. One quirk to this approach is that
once the log is in the IDLE (i.e. already covered) state, any
subsequent log write resets the state back to NEED. This means that
a final superblock sync to an already covered log requires two more
sb syncs to return the log back to IDLE again.
For example, if a lazy superblock enabled filesystem is mount cycled
without any modifications, the unmount path syncs the superblock
once and writes an unmount record. With the desired log quiesce
covering behavior, we sync the superblock three times at unmount
time: once for the lazy superblock counter update and twice more to
cover the log. By contrast, if the log is active or only partially
covered at unmount time, a final superblock sync would doubly serve
as the one or two remaining syncs required to cover the log.
This duplicate covering sequence is unnecessary because the
filesystem remains consistent if a crash occurs at any point. The
superblock will either be recovered in the event of a crash or
written back before the log is quiesced and potentially cleaned with
an unmount record.
Update the log covering state machine to remain in the IDLE state if
additional covering checkpoints pass through the log. This
facilitates final superblock updates (such as lazy superblock
counters) via a single sb sync without losing covered status. This
provides some consistency with the active and partially covered
cases and also avoids harmless, but spurious checkpoints when
quiescing the log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
The log quiesce mechanism historically terminates by marking the log
clean with an unmount record. The primary objective is to indicate
that log recovery is no longer required after the quiesce has
flushed all in-core changes and written back filesystem metadata.
While this is perfectly fine, it is somewhat hacky as currently used
in certain contexts. For example, filesystem freeze quiesces (i.e.
cleans) the log and immediately redirties it with a dummy superblock
transaction to ensure that log recovery runs in the event of a
crash.
While this functions correctly, cleaning the log from freeze context
is clearly superfluous given the current redirtying behavior.
Instead, the desired behavior can be achieved by simply covering the
log. This effectively retires all on-disk log items from the active
range of the log by issuing two synchronous and sequential dummy
superblock update transactions that serve to update the on-disk log
head and tail. The subtle difference is that the log technically
remains dirty due to the lack of an unmount record, though recovery
is effectively a no-op due to the content of the checkpoints being
clean (i.e. the unmodified on-disk superblock).
Log covering currently runs in the background and only triggers once
the filesystem and log has idled. The purpose of the background
mechanism is to prevent log recovery from replaying the most
recently logged items long after those items may have been written
back. In the quiesce path, the log has been deliberately idled by
forcing the log and pushing the AIL until empty in a context where
no further mutable filesystem operations are allowed. Therefore, we
can cover the log as the final step in the log quiesce codepath to
reflect that all previously active items have been successfully
written back.
This facilitates selective log covering from certain contexts (i.e.
freeze) that only seek to quiesce, but not necessarily clean the
log. Note that as a side effect of this change, log covering now
occurs when cleaning the log as well. This is harmless, facilitates
subsequent cleanups, and is mostly temporary as various operations
switch to use explicit log covering.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Log quiesce is currently associated with cleaning the log, which is
accomplished by writing an unmount record as the last step of the
quiesce sequence. The quiesce codepath is a bit convoluted in this
regard due to how it is reused from various contexts. In preparation
to create separate log cleaning and log covering interfaces, lift
the write of the unmount record into a new cleaning helper and call
that wherever xfs_log_quiesce() is currently invoked. No functional
changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The log covering helper checks whether the filesystem is writable to
determine whether to cover the log. The helper is currently only
called from the background log worker. In preparation to reuse the
helper from freezing contexts, lift the check into xfs_log_worker().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_log_sbcount() syncs the superblock specifically to accumulate
the in-core percpu superblock counters and commit them to disk. This
is required to maintain filesystem consistency across quiesce
(freeze, read-only mount/remount) or unmount when lazy superblock
accounting is enabled because individual transactions do not update
the superblock directly.
This mechanism works as expected for writable mounts, but
xfs_log_sbcount() skips the update for read-only mounts. Read-only
mounts otherwise still allow log recovery and write out an unmount
record during log quiesce. If a read-only mount performs log
recovery, it can modify the in-core superblock counters and write an
unmount record when the filesystem unmounts without ever syncing the
in-core counters. This leaves the filesystem with a clean log but in
an inconsistent state with regard to lazy sb counters.
Update xfs_log_sbcount() to use the same logic
xfs_log_unmount_write() uses to determine when to write an unmount
record. This ensures that lazy accounting is always synced before
the log is cleaned. Refactor this logic into a new helper to
distinguish between a writable filesystem and a writable log.
Specifically, the log is writable unless the filesystem is mounted
with the norecovery mount option, the underlying log device is
read-only, or the filesystem is shutdown. Drop the freeze state
check because the update is already allowed during the freezing
process and no context calls this function on an already frozen fs.
Also, retain the shutdown check in xfs_log_unmount_write() to catch
the case where the preceding log force might have triggered a
shutdown.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
When XFS creates a new symlink, it writes its size to disk but not to the
VFS inode. This causes i_size_read() to return 0 for that symlink until
it is re-read from disk, for example when the system is rebooted.
I found this inconsistency while protecting directories with eCryptFS.
The command "stat path/to/symlink/in/ecryptfs" will report "Size: 0" if
the symlink was created after the last reboot on an XFS root.
Call i_size_write() in xfs_symlink()
Signed-off-by: Jeffrey Mitchell <jeffrey.mitchell@starlab.io>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
xfs_buftarg_drain() is called from xfs_log_quiesce() to ensure the
buffer cache is reclaimed during unmount. xfs_log_quiesce() is also
called from xfs_quiesce_attr(), however, which means that cache
state is completely drained for filesystem freeze and read-only
remount. While technically harmless, this is unnecessarily
heavyweight. Both freeze and read-only mounts allow reads and thus
allow population of the buffer cache. Therefore, the transitional
sequence in either case really only needs to quiesce outstanding
writes to return the filesystem in a generally read-only state.
Additionally, some users have reported that attempts to freeze a
filesystem concurrent with a read-heavy workload causes the freeze
process to stall for a significant amount of time. This occurs
because, as mentioned above, the read workload repopulates the
buffer LRU while the freeze task attempts to drain it.
To improve this situation, replace the drain in xfs_log_quiesce()
with a buffer I/O quiesce and lift the drain into the unmount path.
This removes buffer LRU reclaim from freeze and read-only [re]mount,
but ensures the LRU is still drained before the filesystem unmounts.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_wait_buftarg() is vaguely named and somewhat overloaded. Its
primary purpose is to reclaim all buffers from the provided buffer
target LRU. In preparation to refactor xfs_wait_buftarg() into
serialization and LRU draining components, rename the function and
associated helpers to something more descriptive. This patch has no
functional changes with the minor exception of renaming a
tracepoint.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
An assert failure is triggered by syzkaller test due to
ATTR_KILL_PRIV is not cleared before xfs_setattr_size.
As ATTR_KILL_PRIV is not checked/used by xfs_setattr_size,
just remove it from the assert.
Signed-off-by: Yumei Huang <yuhuang@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
XFS always inherits the SGID bit if it is set on the parent inode, while
the generic inode_init_owner does not do this in a few cases where it can
create a possible security problem, see commit 0fa3ecd878
("Fix up non-directory creation in SGID directories") for details.
Switch XFS to use the generic helper for the normal path to fix this,
just keeping the simple field inheritance open coded for the case of the
non-sgid case with the bsdgrpid mount option.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The comment in xfs_file_aio_write_checks() about calling file_modified()
after dropping the ilock doesn't make sense, because the code that
unconditionally acquires and drops the ilock was removed by
commit 467f78992a ("xfs: reduce ilock hold times in
xfs_file_aio_write_checks").
Remove this outdated comment.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This commit adds XFS_ERRTAG_BMAP_ALLOC_MINLEN_EXTENT error tag which
helps userspace test programs to get xfs_bmap_btalloc() to always
allocate minlen sized extents.
This is required for test programs which need a guarantee that minlen
extents allocated for a file do not get merged with their existing
neighbours in the inode's BMBT. "Inode fork extent overflow check" for
Directories, Xattrs and extension of realtime inodes need this since the
file offset at which the extents are being allocated cannot be
explicitly controlled from userspace.
One way to use this error tag is to,
1. Consume all of the free space by sequentially writing to a file.
2. Punch alternate blocks of the file. This causes CNTBT to contain
sufficient number of one block sized extent records.
3. Inject XFS_ERRTAG_BMAP_ALLOC_MINLEN_EXTENT error tag.
After step 3, xfs_bmap_btalloc() will issue space allocation
requests for minlen sized extents only.
ENOSPC error code is returned to userspace when there aren't any "one
block sized" extents left in any of the AGs.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This commit moves over the code in xfs_bmap_btalloc() which is
responsible for processing an allocated extent to a new function. Apart
from xfs_bmap_btalloc(), the new function will be invoked by another
function introduced in a future commit.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This commit moves over the code which computes stripe alignment and
extent size hint alignment into a separate function. Apart from
xfs_bmap_btalloc(), the new function will be used by another function
introduced in a future commit.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The check for verifying if the allocated extent is from an AG whose
index is greater than or equal to that of tp->t_firstblock is already
done a couple of statements earlier in the same function. Hence this
commit removes the redundant assert statement.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This commit adds XFS_ERRTAG_REDUCE_MAX_IEXTENTS error tag which enables
userspace programs to test "Inode fork extent count overflow detection"
by reducing maximum possible inode fork extent count to 10.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Removing an initial range of source/donor file's extent and adding a new
extent (from donor/source file) in its place will cause extent count to
increase by 1.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remapping an extent involves unmapping the existing extent and mapping
in the new extent. When unmapping, an extent containing the entire unmap
range can be split into two extents,
i.e. | Old extent | hole | Old extent |
Hence extent count increases by 1.
Mapping in the new extent into the destination file can increase the
extent count by 1.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Moving an extent to data fork can cause a sub-interval of an existing
extent to be unmapped. This will increase extent count by 1. Mapping in
the new extent can increase the extent count by 1 again i.e.
| Old extent | New extent | Old extent |
Hence number of extents increases by 2.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A write to a sub-interval of an existing unwritten extent causes
the original extent to be split into 3 extents
i.e. | Unwritten | Real | Unwritten |
Hence extent count can increase by 2.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Adding/removing an xattr can cause XFS_DA_NODE_MAXDEPTH extents to be
added. One extra extent for dabtree in case a local attr is large enough
to cause a double split. It can also cause extent count to increase
proportional to the size of a remote xattr's value.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A rename operation is essentially a directory entry remove operation
from the perspective of parent directory (i.e. src_dp) of rename's
source. Hence the only place where we check for extent count overflow
for src_dp is in xfs_bmap_del_extent_real(). xfs_bmap_del_extent_real()
returns -ENOSPC when it detects a possible extent count overflow and in
response, the higher layers of directory handling code do the following:
1. Data/Free blocks: XFS lets these blocks linger until a future remove
operation removes them.
2. Dabtree blocks: XFS swaps the blocks with the last block in the Leaf
space and unmaps the last block.
For target_dp, there are two cases depending on whether the destination
directory entry exists or not.
When destination directory entry does not exist (i.e. target_ip ==
NULL), extent count overflow check is performed only when transaction
has a non-zero sized space reservation associated with it. With a
zero-sized space reservation, XFS allows a rename operation to continue
only when the directory has sufficient free space in its data/leaf/free
space blocks to hold the new entry.
When destination directory entry exists (i.e. target_ip != NULL), all
we need to do is change the inode number associated with the already
existing entry. Hence there is no need to perform an extent count
overflow check.
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Directory entry removal must always succeed; Hence XFS does the
following during low disk space scenario:
1. Data/Free blocks linger until a future remove operation.
2. Dabtree blocks would be swapped with the last block in the leaf space
and then the new last block will be unmapped.
This facility is reused during low inode extent count scenario i.e. this
commit causes xfs_bmap_del_extent_real() to return -ENOSPC error code so
that the above mentioned behaviour is exercised causing no change to the
directory's extent count.
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Directory entry addition can cause the following,
1. Data block can be added/removed.
A new extent can cause extent count to increase by 1.
2. Free disk block can be added/removed.
Same behaviour as described above for Data block.
3. Dabtree blocks.
XFS_DA_NODE_MAXDEPTH blocks can be added. Each of these
can be new extents. Hence extent count can increase by
XFS_DA_NODE_MAXDEPTH.
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The extent mapping the file offset at which a hole has to be
inserted will be split into two extents causing extent count to
increase by 1.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When adding a new data extent (without modifying an inode's existing
extents) the extent count increases only by 1. This commit checks for
extent count overflow in such cases.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS does not check for possible overflow of per-inode extent counter
fields when adding extents to either data or attr fork.
For e.g.
1. Insert 5 million xattrs (each having a value size of 255 bytes) and
then delete 50% of them in an alternating manner.
2. On a 4k block sized XFS filesystem instance, the above causes 98511
extents to be created in the attr fork of the inode.
xfsaild/loop0 2008 [003] 1475.127209: probe:xfs_inode_to_disk: (ffffffffa43fb6b0) if_nextents=98511 i_ino=131
3. The incore inode fork extent counter is a signed 32-bit
quantity. However the on-disk extent counter is an unsigned 16-bit
quantity and hence cannot hold 98511 extents.
4. The following incorrect value is stored in the attr extent counter,
# xfs_db -f -c 'inode 131' -c 'print core.naextents' /dev/loop0
core.naextents = -32561
This commit adds a new helper function (i.e.
xfs_iext_count_may_overflow()) to check for overflow of the per-inode
data and xattr extent counters. Future patches will use this function to
make sure that an FS operation won't cause the extent counter to
overflow.
Suggested-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When overlayfs is running on top of xfs and the user unlinks a file in
the overlay, overlayfs will create a whiteout inode and ask xfs to
"rename" the whiteout file atop the one being unlinked. If the file
being unlinked loses its one nlink, we then have to put the inode on the
unlinked list.
This requires us to grab the AGI buffer of the whiteout inode to take it
off the unlinked list (which is where whiteouts are created) and to grab
the AGI buffer of the file being deleted. If the whiteout was created
in a higher numbered AG than the file being deleted, we'll lock the AGIs
in the wrong order and deadlock.
Therefore, grab all the AGI locks we think we'll need ahead of time, and
in order of increasing AG number per the locking rules.
Reported-by: wenli xie <wlxie7296@gmail.com>
Fixes: 93597ae8da ("xfs: Fix deadlock between AGI and AGF when target_ip exists in xfs_rename()")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
alloc_set_pte() has two users with different requirements: in the
faultaround code, it called from an atomic context and PTE page table
has to be preallocated. finish_fault() can sleep and allocate page table
as needed.
PTL locking rules are also strange, hard to follow and overkill for
finish_fault().
Let's untangle the mess. alloc_set_pte() has gone now. All locking is
explicit.
The price is some code duplication to handle huge pages in faultaround
path, but it should be fine, having overall improvement in readability.
Link: https://lore.kernel.org/r/20201229132819.najtavneutnf7ajp@box
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[will: s/from from/from/ in comment; spotted by willy]
Signed-off-by: Will Deacon <will@kernel.org>
- Introduce a "needsrepair" "feature" to flag a filesystem as needing a
pass through xfs_repair. This is key to enabling filesystem upgrades
(in xfs_db) that require xfs_repair to make minor adjustments to metadata.
- Refactor parameter checking of recovered log intent items so that we
actually use the same validation code as them that generate the intent
items.
- Various fixes to online scrub not reacting correctly to directory
entries pointing to inodes that cannot be igetted.
- Refactor validation helpers for data and rt volume extents.
- Refactor XFS_TRANS_DQ_DIRTY out of existence.
- Fix a longstanding bug where mounting with "uqnoenforce" would start
user quotas in non-enforcing mode but /proc/mounts would display
"usrquota", implying that they are being enforced.
- Don't flag dax+reflink inodes as corruption since that is a valid (but
not fully functional) combination right now.
- Clean up raid stripe validation functions.
- Refactor the inode allocation code to be more straightforward.
- Small prep cleanup for idmapping support.
- Get rid of the xfs_buf_t typedef.
-----BEGIN PGP SIGNATURE-----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=job0
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.11-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"In this release we add the ability to set a 'needsrepair' flag
indicating that we /know/ the filesystem requires xfs_repair, but
other than that, it's the usual strengthening of metadata validation
and miscellaneous cleanups.
Summary:
- Introduce a "needsrepair" "feature" to flag a filesystem as needing
a pass through xfs_repair. This is key to enabling filesystem
upgrades (in xfs_db) that require xfs_repair to make minor
adjustments to metadata.
- Refactor parameter checking of recovered log intent items so that
we actually use the same validation code as them that generate the
intent items.
- Various fixes to online scrub not reacting correctly to directory
entries pointing to inodes that cannot be igetted.
- Refactor validation helpers for data and rt volume extents.
- Refactor XFS_TRANS_DQ_DIRTY out of existence.
- Fix a longstanding bug where mounting with "uqnoenforce" would
start user quotas in non-enforcing mode but /proc/mounts would
display "usrquota", implying that they are being enforced.
- Don't flag dax+reflink inodes as corruption since that is a valid
(but not fully functional) combination right now.
- Clean up raid stripe validation functions.
- Refactor the inode allocation code to be more straightforward.
- Small prep cleanup for idmapping support.
- Get rid of the xfs_buf_t typedef"
* tag 'xfs-5.11-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (40 commits)
xfs: remove xfs_buf_t typedef
fs/xfs: convert comma to semicolon
xfs: open code updating i_mode in xfs_set_acl
xfs: remove xfs_vn_setattr_nonsize
xfs: kill ialloced in xfs_dialloc()
xfs: spilt xfs_dialloc() into 2 functions
xfs: move xfs_dialloc_roll() into xfs_dialloc()
xfs: move on-disk inode allocation out of xfs_ialloc()
xfs: introduce xfs_dialloc_roll()
xfs: convert noroom, okalloc in xfs_dialloc() to bool
xfs: don't catch dax+reflink inodes as corruption in verifier
xfs: fix the forward progress assertion in xfs_iwalk_run_callbacks
xfs: remove unneeded return value check for *init_cursor()
xfs: introduce xfs_validate_stripe_geometry()
xfs: show the proper user quota options
xfs: remove the unused XFS_B_FSB_OFFSET macro
xfs: remove unnecessary null check in xfs_generic_create
xfs: directly return if the delta equal to zero
xfs: check tp->t_dqinfo value instead of the XFS_TRANS_DQ_DIRTY flag
xfs: delete duplicated tp->t_dqinfo null check and allocation
...
Prepare for kernel xfs_buf alignment by getting rid of the
xfs_buf_t typedef from userspace.
[darrick: This patch is a port of a userspace patch removing the
xfs_buf_t typedef in preparation to make the userspace xfs_buf code
behave more like its kernel counterpart.]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
-----BEGIN PGP SIGNATURE-----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=zo4w
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rather than going through the big and hairy xfs_setattr_nonsize function,
just open code a transactional i_mode and i_ctime update. This allows
to mark xfs_setattr_nonsize and remove the flags argument to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Merge xfs_vn_setattr_nonsize into the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It's enough to just use return code, and get rid of an argument.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This patch explicitly separates free inode chunk allocation and
inode allocation into two individual high level operations.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Get rid of the confusing ialloc_context and failure handling around
xfs_dialloc() by moving xfs_dialloc_roll() into xfs_dialloc().
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
So xfs_ialloc() will only address in-core inode allocation then,
Also, rename xfs_ialloc() to xfs_dir_ialloc_init() in order to
keep everything in xfs_inode.c under the same namespace.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Introduce a helper to make the on-disk inode allocation rolling
logic clearer in preparation of the following cleanup.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Boolean is preferred for such use.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We don't yet support dax on reflinked files, but that is in the works.
Further, having the flag set does not automatically mean that the inode
is actually "in the CPU direct access state," which depends on several
other conditions in addition to the flag being set.
As such, we should not catch this as corruption in the verifier - simply
not actually enabling S_DAX on reflinked files is enough for now.
Fixes: 4f435ebe7d ("xfs: don't mix reflink and DAX mode for now")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[darrick: fix the scrubber too]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit 27c14b5daa we started tracking the last inode seen during an
inode walk to avoid infinite loops if a corrupt inobt record happens to
have a lower ir_startino than the record preceeding it. Unfortunately,
the assertion trips over the case where there are completely empty inobt
records (which can happen quite easily on 64k page filesystems) because
we advance the tracking cursor without actually putting the empty record
into the processing buffer. Fix the assert to allow for this case.
Reported-by: zlang@redhat.com
Fixes: 27c14b5daa ("xfs: ensure inobt record walks always make forward progress")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Since *init_cursor() can always return a valid cursor, the NULL check
in caller is unneeded. So clean them up.
This also keeps the behavior consistent with other callers.
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Introduce a common helper to consolidate stripe validation process.
Also make kernel code xfs_validate_sb_common() use it first.
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The quota option 'usrquota' should be shown if both the XFS_UQUOTA_ACCT
and XFS_UQUOTA_ENFD flags are set. The option 'uqnoenforce' should be
shown when only the XFS_UQUOTA_ACCT flag is set. The current code logic
seems wrong, Fix it and show proper options.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are no callers of the XFS_B_FSB_OFFSET macro, so remove it.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The function posix_acl_release() test the passed-in argument and
move on only when it is non-null, so maybe the null check in
xfs_generic_create is unnecessary.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xfs_trans_mod_dquot() function will allocate new tp->t_dqinfo if
it is NULL and make the changes in the tp->t_dqinfo->dqs[XFS_QM_TRANS
_{USR,GRP,PRJ}]. Nowadays seems none of the callers want to join the
dquots to the transaction and push them to device when the delta is
zero. Actually, most of time the caller would check the delta and go
on only when the delta value is not zero, so we should bail out when
it is zero.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Nowadays the only things that the XFS_TRANS_DQ_DIRTY flag seems to do
are indicates the tp->t_dqinfo->dqs[XFS_QM_TRANS_{USR,GRP,PRJ}] values
changed and check in xfs_trans_apply_dquot_deltas() and the unreserve
variant xfs_trans_unreserve_and_mod_dquots(). Actually, we also can
use the tp->t_dqinfo value instead of the XFS_TRANS_DQ_DIRTY flag, that
is to say, we allocate the new tp->t_dqinfo only when the qtrx values
changed, so the tp->t_dqinfo value isn't NULL equals the XFS_TRANS_DQ_DIRTY
flag is set, we only need to check if tp->t_dqinfo == NULL in
xfs_trans_apply_dquot_deltas() and its unreserve variant to determine
whether lock all of the dquots and join them to the transaction.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The function xfs_trans_mod_dquot_byino() wraps around
xfs_trans_mod_dquot() to account for quotas, and also there is the
function call chain xfs_trans_reserve_quota_bydquots -> xfs_trans_dqresv
-> xfs_trans_mod_dquot, both of them do the duplicated null check and
allocation. Thus we can delete the duplicated operation from them.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Get rid of this one-off namespace since we're done converting things to
fscontext now.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor all the open-coded validation of file block ranges into a
single helper, and teach the bmap scrubber to check the ranges.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Refactor all the open-coded validation of realtime device extents into a
single helper.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Refactor all the open-coded validation of non-static data device extents
into a single helper.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
It's possible that xfs_iget can return EINVAL for inodes that the inobt
thinks are free, or ENOENT for inodes that look free. If this is the
case, mark the directory corrupt immediately when we check ftype. Note
that we already check the ftype of the '.' and '..' entries, so we
can skip the iget part since we already know the inode type for '.' and
we have a separate parent pointer scrubber for '..'.
Fixes: a5c46e5e89 ("xfs: scrub directory metadata")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_iget can return -ENOENT for a file that the inobt thinks is
allocated but has zeroed mode. This currently causes scrub to exit
with an operational error instead of flagging this as a corruption. The
end result is that scrub mistakenly reports the ENOENT to the user
instead of "directory parent pointer corrupt" like we do for EINVAL.
Fixes: 5927268f5a ("xfs: flag inode corruption if parent ptr doesn't get us a real inode")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Detect file block mappings with a blockcount that's either so large that
integer overflows occur or are zero, because neither are valid in the
filesystem. Worse yet, attempting directory modifications causes the
iext code to trip over the bmbt key handling and takes the filesystem
down. We can fix most of this by preventing the bad metadata from
entering the incore structures in the first place.
Found by setting blockcount=0 in a directory data fork mapping and
watching the fireworks.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a trace point so that we can capture when a recovered log intent
item fails to recover.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The rmap, and refcount log intent items were added to support the rmap
and reflink features. Because these features come with changes to the
ondisk format, the log items aren't tied to a log incompat flag.
However, the log recovery routines don't actually check for those
feature flags. The kernel has no business replayng an intent item for a
feature that isn't enabled, so check that as part of recovered log item
validation. (Note that kernels pre-dating rmap and reflink already fail
log recovery on the unknown log item type code.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The code that validates recovered extent-free intent items is kind of a
mess -- it doesn't use the standard xfs type validators, and it doesn't
check for things that it should. Fix the validator function to use the
standard validation helpers and look for more types of obvious errors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we recover a extent-free intent from the log, we need to validate
its contents before we try to replay them. Hoist the checking code into
a separate function in preparation to refactor this code to use
validation helpers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The code that validates recovered refcount intent items is kind of a
mess -- it doesn't use the standard xfs type validators, and it doesn't
check for things that it should. Fix the validator function to use the
standard validation helpers and look for more types of obvious errors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we recover a refcount intent from the log, we need to validate its
contents before we try to replay them. Hoist the checking code into a
separate function in preparation to refactor this code to use validation
helpers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The code that validates recovered rmap intent items is kind of a mess --
it doesn't use the standard xfs type validators, and it doesn't check
for things that it should. Fix the validator function to use the
standard validation helpers and look for more types of obvious errors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we recover a rmap intent from the log, we need to validate its
contents before we try to replay them. Hoist the checking code into a
separate function in preparation to refactor this code to use validation
helpers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The code that validates recovered bmap intent items is kind of a mess --
it doesn't use the standard xfs type validators, and it doesn't check
for things that it should. Fix the validator function to use the
standard validation helpers and look for more types of obvious errors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we recover a bmap intent from the log, we need to validate its
contents before we try to replay them. Hoist the checking code into a
separate function in preparation to refactor this code to use validation
helpers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Make it so that libxfs recognizes the needsrepair feature. Note that
the kernel will still refuse to mount these.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Define an incompat feature flag to indicate that the filesystem needs to
be repaired. While libxfs will recognize this feature, the kernel will
refuse to mount if the feature flag is set, and only xfs_repair will be
able to clear the flag. The goal here is to force the admin to run
xfs_repair to completion after upgrading the filesystem, or if we
otherwise detect anomalies.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
A couple of the superblock validation checks apply only to the kernel,
so move them to xfs_fc_fill_super before we add the needsrepair "feature",
which will prevent the kernel (but not xfsprogs) from mounting the
filesystem. This also reduces the diff between kernel and userspace
libxfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Store the frozen superblock in struct block_device to avoid the awkward
interface that can return a sb only used a cookie, an ERR_PTR or NULL.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 6ff646b2ce.
Your maintainer committed a major braino in the rmap code by adding the
attr fork, bmbt, and unwritten extent usage bits into rmap record key
comparisons. While XFS uses the usage bits *in the rmap records* for
cross-referencing metadata in xfs_scrub and xfs_repair, it only needs
the owner and offset information to distinguish between reverse mappings
of the same physical extent into the data fork of a file at multiple
offsets. The other bits are not important for key comparisons for index
lookups, and never have been.
Eric Sandeen reports that this causes regressions in generic/299, so
undo this patch before it does more damage.
Reported-by: Eric Sandeen <sandeen@sandeen.net>
Fixes: 6ff646b2ce ("xfs: fix rmap key and record comparison functions")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Jens has reported a situation where partial direct IOs can be issued
and completed yet still return -EAGAIN. We don't want this to report
a short IO as we want XFS to complete user DIO entirely or not at
all.
This partial IO situation can occur on a write IO that is split
across an allocated extent and a hole, and the second mapping is
returning EAGAIN because allocation would be required.
The trivial reproducer:
$ sudo xfs_io -fdt -c "pwrite 0 4k" -c "pwrite -V 1 -b 8k -N 0 8k" /mnt/scr/foo
wrote 4096/4096 bytes at offset 0
4 KiB, 1 ops; 0.0001 sec (27.509 MiB/sec and 7042.2535 ops/sec)
pwrite: Resource temporarily unavailable
$
The pwritev2(0, 8kB, RWF_NOWAIT) call returns EAGAIN having done
the first 4kB write:
xfs_file_direct_write: dev 259:1 ino 0x83 size 0x1000 offset 0x0 count 0x2000
iomap_apply: dev 259:1 ino 0x83 pos 0 length 8192 flags WRITE|DIRECT|NOWAIT (0x31) ops xfs_direct_write_iomap_ops caller iomap_dio_rw actor iomap_dio_actor
xfs_ilock_nowait: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_ilock_for_iomap
xfs_iunlock: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_direct_write_iomap_begin
xfs_iomap_found: dev 259:1 ino 0x83 size 0x1000 offset 0x0 count 8192 fork data startoff 0x0 startblock 24 blockcount 0x1
iomap_apply_dstmap: dev 259:1 ino 0x83 bdev 259:1 addr 102400 offset 0 length 4096 type MAPPED flags DIRTY
Here the first iomap loop has mapped the first 4kB of the file and
issued the IO, and we enter the second iomap_apply loop:
iomap_apply: dev 259:1 ino 0x83 pos 4096 length 4096 flags WRITE|DIRECT|NOWAIT (0x31) ops xfs_direct_write_iomap_ops caller iomap_dio_rw actor iomap_dio_actor
xfs_ilock_nowait: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_ilock_for_iomap
xfs_iunlock: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_direct_write_iomap_begin
And we exit with -EAGAIN out because we hit the allocate case trying
to make the second 4kB block.
Then IO completes on the first 4kB and the original IO context
completes and unlocks the inode, returning -EAGAIN to userspace:
xfs_end_io_direct_write: dev 259:1 ino 0x83 isize 0x1000 disize 0x1000 offset 0x0 count 4096
xfs_iunlock: dev 259:1 ino 0x83 flags IOLOCK_SHARED caller xfs_file_dio_aio_write
There are other vectors to the same problem when we re-enter the
mapping code if we have to make multiple mappinfs under NOWAIT
conditions. e.g. failing trylocks, COW extents being found,
allocation being required, and so on.
Avoid all these potential problems by only allowing IOMAP_NOWAIT IO
to go ahead if the mapping we retrieve for the IO spans an entire
allocated extent. This avoids the possibility of subsequent mappings
to complete the IO from triggering NOWAIT semantics by any means as
NOWAIT IO will now only enter the mapping code once per NOWAIT IO.
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In xfs_initialize_perag(), if kmem_zalloc(), xfs_buf_hash_init(), or
radix_tree_preload() failed, the returned value 'error' is not set
accordingly.
Reported-as-fixing: 8b26c5825e ("xfs: handle ENOMEM correctly during initialisation of perag structures")
Fixes: 9b24717979 ("xfs: cache unlinked pointers in an rhashtable")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The aim of the inode btree record iterator function is to call a
callback on every record in the btree. To avoid having to tear down and
recreate the inode btree cursor around every callback, it caches a
certain number of records in a memory buffer. After each batch of
callback invocations, we have to perform a btree lookup to find the
next record after where we left off.
However, if the keys of the inode btree are corrupt, the lookup might
put us in the wrong part of the inode btree, causing the walk function
to loop forever. Therefore, we add extra cursor tracking to make sure
that we never go backwards neither when performing the lookup nor when
jumping to the next inobt record. This also fixes an off by one error
where upon resume the lookup should have been for the inode /after/ the
point at which we stopped.
Found by fuzzing xfs/460 with keys[2].startino = ones causing bulkstat
and quotacheck to hang.
Fixes: a211432c27 ("xfs: create simplified inode walk function")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Currently, commit e9e2eae89d dropped a (int) decoration from
XFS_LITINO(mp), and since sizeof() expression is also involved,
the result of XFS_LITINO(mp) is simply as the size_t type
(commonly unsigned long).
Considering the expression in xfs_attr_shortform_bytesfit():
offset = (XFS_LITINO(mp) - bytes) >> 3;
let "bytes" be (int)340, and
"XFS_LITINO(mp)" be (unsigned long)336.
on 64-bit platform, the expression is
offset = ((unsigned long)336 - (int)340) >> 3 =
(int)(0xfffffffffffffffcUL >> 3) = -1
but on 32-bit platform, the expression is
offset = ((unsigned long)336 - (int)340) >> 3 =
(int)(0xfffffffcUL >> 3) = 0x1fffffff
instead.
so offset becomes a large positive number on 32-bit platform, and
cause xfs_attr_shortform_bytesfit() returns maxforkoff rather than 0.
Therefore, one result is
"ASSERT(new_size <= XFS_IFORK_SIZE(ip, whichfork));"
assertion failure in xfs_idata_realloc(), which was also the root
cause of the original bugreport from Dennis, see:
https://bugzilla.redhat.com/show_bug.cgi?id=1894177
And it can also be manually triggered with the following commands:
$ touch a;
$ setfattr -n user.0 -v "`seq 0 80`" a;
$ setfattr -n user.1 -v "`seq 0 80`" a
on 32-bit platform.
Fix the case in xfs_attr_shortform_bytesfit() by bailing out
"XFS_LITINO(mp) < bytes" in advance suggested by Eric and a misleading
comment together with this bugfix suggested by Darrick. It seems the
other users of XFS_LITINO(mp) are not impacted.
Fixes: e9e2eae89d ("xfs: only check the superblock version for dinode size calculation")
Cc: <stable@vger.kernel.org> # 5.7+
Reported-and-tested-by: Dennis Gilmore <dgilmore@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Teach the directory scrubber to check all the bestfree entries,
including the null ones. We want to be able to detect the case where
the entry is null but there actually /is/ a directory data block.
Found by fuzzing lbests[0] = ones in xfs/391.
Fixes: df481968f3 ("xfs: scrub directory freespace")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We always know the correct state of the rmap record flags (attr, bmbt,
unwritten) so check them by direct comparison.
Fixes: d852657ccf ("xfs: cross-reference reverse-mapping btree")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The comment and logic in xchk_btree_check_minrecs for dealing with
inode-rooted btrees isn't quite correct. While the direct children of
the inode root are allowed to have fewer records than what would
normally be allowed for a regular ondisk btree block, this is only true
if there is only one child block and the number of records don't fit in
the inode root.
Fixes: 08a3a692ef ("xfs: btree scrub should check minrecs")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We also need to drop the iolock when invalidate_inode_pages2 fails, not
only on all other error or successful cases.
Fixes: 527851124d ("xfs: implement pNFS export operations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Fix some serious WTF in the reference count scrubber's rmap fragment
processing. The code comment says that this loop is supposed to move
all fragment records starting at or before bno onto the worklist, but
there's no obvious reason why nr (the number of items added) should
increment starting from 1, and breaking the loop when we've added the
target number seems dubious since we could have more rmap fragments that
should have been added to the worklist.
This seems to manifest in xfs/411 when adding one to the refcount field.
Fixes: dbde19da96 ("xfs: cross-reference the rmapbt data with the refcountbt")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Keys for extent interval records in the reverse mapping btree are
supposed to be computed as follows:
(physical block, owner, fork, is_btree, is_unwritten, offset)
This provides users the ability to look up a reverse mapping from a bmbt
record -- start with the physical block; then if there are multiple
records for the same block, move on to the owner; then the inode fork
type; and so on to the file offset.
However, the key comparison functions incorrectly remove the
fork/btree/unwritten information that's encoded in the on-disk offset.
This means that lookup comparisons are only done with:
(physical block, owner, offset)
This means that queries can return incorrect results. On consistent
filesystems this hasn't been an issue because blocks are never shared
between forks or with bmbt blocks; and are never unwritten. However,
this bug means that online repair cannot always detect corruption in the
key information in internal rmapbt nodes.
Found by fuzzing keys[1].attrfork = ones on xfs/371.
Fixes: 4b8ed67794 ("xfs: add rmap btree operations")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When the bmbt scrubber is looking up rmap extents, we need to set the
extent flags from the bmbt record fully. This will matter once we fix
the rmap btree comparison functions to check those flags correctly.
Fixes: d852657ccf ("xfs: cross-reference reverse-mapping btree")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pass the same oldext argument (which contains the existing rmapping's
unwritten state) to xfs_rmap_lookup_le_range at the start of
xfs_rmap_convert_shared. At this point in the code, flags is zero,
which means that we perform lookups using the wrong key.
Fixes: 3f165b334e ("xfs: convert unwritten status of reverse mappings for shared files")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There's no reason to flush an entire file when we're unsharing part of
a file. Therefore, only initiate writeback on the selected range.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
The kernel has always allowed directories to have the rtinherit flag
set, even if there is no rt device, so this check is wrong.
Fixes: 80e4e12688 ("xfs: scrub inodes")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit 7588cbeec6, we tried to fix a race stemming from the lack of
coordination between higher level code that wants to allocate and remap
CoW fork extents into the data fork. Christoph cites as examples the
always_cow mode, and a directio write completion racing with writeback.
According to the comments before the goto retry, we want to restart the
lookup to catch the extent in the data fork, but we don't actually reset
whichfork or cow_fsb, which means the second try executes using stale
information. Up until now I think we've gotten lucky that either
there's something left in the CoW fork to cause cow_fsb to be reset, or
either data/cow fork sequence numbers have advanced enough to force a
fresh lookup from the data fork. However, if we reach the retry with an
empty stable CoW fork and a stable data fork, neither of those things
happens. The retry foolishly re-calls xfs_convert_blocks on the CoW
fork which fails again. This time, we toss the write.
I've recently been working on extending reflink to the realtime device.
When the realtime extent size is larger than a single block, we have to
force the page cache to CoW the entire rt extent if a write (or
fallocate) are not aligned with the rt extent size. The strategy I've
chosen to deal with this is derived from Dave's blocksize > pagesize
series: dirtying around the write range, and ensuring that writeback
always starts mapping on an rt extent boundary. This has brought this
race front and center, since generic/522 blows up immediately.
However, I'm pretty sure this is a bug outright, independent of that.
Fixes: 7588cbeec6 ("xfs: retry COW fork delalloc conversion when no extent was found")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
iomap writeback mapping failure only calls into ->discard_page() if
the current page has not been added to the ioend. Accordingly, the
XFS callback assumes a full page discard and invalidation. This is
problematic for sub-page block size filesystems where some portion
of a page might have been mapped successfully before a failure to
map a delalloc block occurs. ->discard_page() is not called in that
error scenario and the bio is explicitly failed by iomap via the
error return from ->prepare_ioend(). As a result, the filesystem
leaks delalloc blocks and corrupts the filesystem block counters.
Since XFS is the only user of ->discard_page(), tweak the semantics
to invoke the callback unconditionally on mapping errors and provide
the file offset that failed to map. Update xfs_discard_page() to
discard the corresponding portion of the file and pass the range
along to iomap_invalidatepage(). The latter already properly handles
both full and sub-page scenarios by not changing any iomap or page
state on sub-page invalidations.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It is possible to expose non-zeroed post-EOF data in XFS if the new
EOF page is dirty, backed by an unwritten block and the truncate
happens to race with writeback. iomap_truncate_page() will not zero
the post-EOF portion of the page if the underlying block is
unwritten. The subsequent call to truncate_setsize() will, but
doesn't dirty the page. Therefore, if writeback happens to complete
after iomap_truncate_page() (so it still sees the unwritten block)
but before truncate_setsize(), the cached page becomes inconsistent
with the on-disk block. A mapped read after the associated page is
reclaimed or invalidated exposes non-zero post-EOF data.
For example, consider the following sequence when run on a kernel
modified to explicitly flush the new EOF page within the race
window:
$ xfs_io -fc "falloc 0 4k" -c fsync /mnt/file
$ xfs_io -c "pwrite 0 4k" -c "truncate 1k" /mnt/file
...
$ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file
00000400: 00 00 00 00 00 00 00 00 ........
$ umount /mnt/; mount <dev> /mnt/
$ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file
00000400: cd cd cd cd cd cd cd cd ........
Update xfs_setattr_size() to explicitly flush the new EOF page prior
to the page truncate to ensure iomap has the latest state of the
underlying block.
Fixes: 68a9f5e700 ("xfs: implement iomap based buffered write path")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make sure that we actually initialize xefi_discard when we're scheduling
a deferred free of an AGFL block. This was (eventually) found by the
UBSAN while I was banging on realtime rmap problems, but it exists in
the upstream codebase. While we're at it, rearrange the structure to
reduce the struct size from 64 to 56 bytes.
Fixes: fcb762f5de ("xfs: add bmapi nodiscard flag")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place (the largest group here is
Christoph's stat cleanups)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove KSTAT_QUERY_FLAGS
fs: remove vfs_stat_set_lookup_flags
fs: move vfs_fstatat out of line
fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat
fs: remove vfs_statx_fd
fs: omfs: use kmemdup() rather than kmalloc+memcpy
[PATCH] reduce boilerplate in fsid handling
fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS
selftests: mount: add nosymfollow tests
Add a "nosymfollow" mount option.
- Make fallocate check the alignment of its arguments against the
fundamental allocation unit of the volume the file lives on, so that we
don't trigger the fs' alignment checks.
- Cancel unprocessed log intents immediately when log recovery fails, to
avoid a log deadlock.
-----BEGIN PGP SIGNATURE-----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=Bipc
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.10-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Two bug fixes that trickled in during the merge window:
- Make fallocate check the alignment of its arguments against the
fundamental allocation unit of the volume the file lives on, so
that we don't trigger the fs' alignment checks.
- Cancel unprocessed log intents immediately when log recovery fails,
to avoid a log deadlock"
* tag 'xfs-5.10-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: cancel intents immediately if process_intents fails
xfs: fix fallocate functions when rtextsize is larger than 1
If processing recovered log intent items fails, we need to cancel all
the unprocessed recovered items immediately so that a subsequent AIL
push in the bail out path won't get wedged on the pinned intent items
that didn't get processed.
This can happen if the log contains (1) an intent that gets and releases
an inode, (2) an intent that cannot be recovered successfully, and (3)
some third intent item. When recovery of (2) fails, we leave (3) pinned
in memory. Inode reclamation is called in the error-out path of
xfs_mountfs before xfs_log_cancel_mount. Reclamation calls
xfs_ail_push_all_sync, which gets stuck waiting for (3).
Therefore, call xlog_recover_cancel_intents if _process_intents fails.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In commit fe341eb151, I forgot that xfs_free_file_space isn't strictly
a "remove mapped blocks" function. It is actually a function to zero
file space by punching out the middle and writing zeroes to the
unaligned ends of the specified range. Therefore, putting a rtextsize
alignment check in that function is wrong because that breaks unaligned
ZERO_RANGE on the realtime volume.
Furthermore, xfs_file_fallocate already has alignment checks for the
functions require the file range to be aligned to the size of a
fundamental allocation unit (which is 1 FSB on the data volume and 1 rt
extent on the realtime volume). Create a new helper to check fallocate
arguments against the realtiem allocation unit size, fix the fallocate
frontend to use it, fix free_file_space to delete the correct range, and
remove a now redundant check from insert_file_space.
NOTE: The realtime extent size is not required to be a power of two!
Fixes: fe341eb151 ("xfs: ensure that fpunch, fcollapse, and finsert operations are aligned to rt extent size")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
- New feature: Widen inode timestamps and quota grace expiration
timestamps to support dates through the year 2486.
- New feature: storing inode btree counts in the AGI to speed up certain
mount time per-AG block reservation operatoins and add a little more
metadata redundancy.
For the second round of new code for 5.10:
- Deprecate the V4 filesystem format, some disused mount options, and some
legacy sysctl knobs now that we can support dates into the 25th century.
Note that removal of V4 support will not happen until the early 2030s.
- Fix some probles with inode realtime flag propagation.
- Fix some buffer handling issues when growing a rt filesystem.
- Fix a problem where a BMAP_REMAP unmap call would free rt extents even
though the purpose of BMAP_REMAP is to avoid freeing the blocks.
- Strengthen the dabtree online scrubber to check hash values on child
dabtree blocks.
- Actually log new intent items created as part of recovering log intent
items.
- Fix a bug where quotas weren't attached to an inode undergoing bmap
intent item recovery.
- Fix a buffer overrun problem with specially crafted log buffer
headers.
- Various cleanups to type usage and slightly inaccurate comments.
- More cleanups to the xattr, log, and quota code.
- Don't run the (slower) shared-rmap operations on attr fork mappings.
- Fix a bug where we failed to check the LSN of finobt blocks during
replay and could therefore overwrite newer data with older data.
- Clean up the ugly nested transaction mess that log recovery uses to
stage intent item recovery in the correct order by creating a proper
data structure to capture recovered chains.
- Use the capture structure to resume intent item chains with the
same log space and block reservations as when they were captured.
- Fix a UAF bug in bmap intent item recovery where we failed to maintain
our reference to the incore inode if the bmap operation needed to
relog itself to continue.
- Rearrange the defer ops mechanism to finish newly created subtasks
of a parent task before moving on to the next parent task.
- Automatically relog intent items in deferred ops chains if doing so
would help us avoid pinning the log tail. This will help fix some
log scaling problems now and will facilitate atomic file updates later.
- Fix a deadlock in the GETFSMAP implementation by using an internal
memory buffer to reduce indirect calls and copies to userspace,
thereby improving its performance by ~20%.
- Fix various problems when calling growfs on a realtime volume would
not fully update the filesystem metadata.
- Fix broken Kconfig asking about deprecated XFS when XFS is disabled.
-----BEGIN PGP SIGNATURE-----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=LuWg
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.10-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"The second large pile of new stuff for 5.10, with changes even more
monumental than last week!
We are formally announcing the deprecation of the V4 filesystem format
in 2030. All users must upgrade to the V5 format, which contains
design improvements that greatly strengthen metadata validation,
supports reflink and online fsck, and is the intended vehicle for
handling timestamps past 2038. We're also deprecating the old Irix
behavioral tweaks in September 2025.
Coming along for the ride are two design changes to the deferred
metadata ops subsystem. One of the improvements is to retain correct
logical ordering of tasks and subtasks, which is a more logical design
for upper layers of XFS and will become necessary when we add atomic
file range swaps and commits. The second improvement to deferred ops
improves the scalability of the log by helping the log tail to move
forward during long-running operations. This reduces log contention
when there are a large number of threads trying to run transactions.
In addition to that, this fixes numerous small bugs in log recovery;
refactors logical intent log item recovery to remove the last
remaining place in XFS where we could have nested transactions; fixes
a couple of ways that intent log item recovery could fail in ways that
wouldn't have happened in the regular commit paths; fixes a deadlock
vector in the GETFSMAP implementation (which improves its performance
by 20%); and fixes serious bugs in the realtime growfs, fallocate, and
bitmap handling code.
Summary:
- Deprecate the V4 filesystem format, some disused mount options, and
some legacy sysctl knobs now that we can support dates into the
25th century. Note that removal of V4 support will not happen until
the early 2030s.
- Fix some probles with inode realtime flag propagation.
- Fix some buffer handling issues when growing a rt filesystem.
- Fix a problem where a BMAP_REMAP unmap call would free rt extents
even though the purpose of BMAP_REMAP is to avoid freeing the
blocks.
- Strengthen the dabtree online scrubber to check hash values on
child dabtree blocks.
- Actually log new intent items created as part of recovering log
intent items.
- Fix a bug where quotas weren't attached to an inode undergoing bmap
intent item recovery.
- Fix a buffer overrun problem with specially crafted log buffer
headers.
- Various cleanups to type usage and slightly inaccurate comments.
- More cleanups to the xattr, log, and quota code.
- Don't run the (slower) shared-rmap operations on attr fork
mappings.
- Fix a bug where we failed to check the LSN of finobt blocks during
replay and could therefore overwrite newer data with older data.
- Clean up the ugly nested transaction mess that log recovery uses to
stage intent item recovery in the correct order by creating a
proper data structure to capture recovered chains.
- Use the capture structure to resume intent item chains with the
same log space and block reservations as when they were captured.
- Fix a UAF bug in bmap intent item recovery where we failed to
maintain our reference to the incore inode if the bmap operation
needed to relog itself to continue.
- Rearrange the defer ops mechanism to finish newly created subtasks
of a parent task before moving on to the next parent task.
- Automatically relog intent items in deferred ops chains if doing so
would help us avoid pinning the log tail. This will help fix some
log scaling problems now and will facilitate atomic file updates
later.
- Fix a deadlock in the GETFSMAP implementation by using an internal
memory buffer to reduce indirect calls and copies to userspace,
thereby improving its performance by ~20%.
- Fix various problems when calling growfs on a realtime volume would
not fully update the filesystem metadata.
- Fix broken Kconfig asking about deprecated XFS when XFS is
disabled"
* tag 'xfs-5.10-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (48 commits)
xfs: fix Kconfig asking about XFS_SUPPORT_V4 when XFS_FS=n
xfs: fix high key handling in the rt allocator's query_range function
xfs: annotate grabbing the realtime bitmap/summary locks in growfs
xfs: make xfs_growfs_rt update secondary superblocks
xfs: fix realtime bitmap/summary file truncation when growing rt volume
xfs: fix the indent in xfs_trans_mod_dquot
xfs: do the ASSERT for the arguments O_{u,g,p}dqpp
xfs: fix deadlock and streamline xfs_getfsmap performance
xfs: limit entries returned when counting fsmap records
xfs: only relog deferred intent items if free space in the log gets low
xfs: expose the log push threshold
xfs: periodically relog deferred intent items
xfs: change the order in which child and parent defer ops are finished
xfs: fix an incore inode UAF in xfs_bui_recover
xfs: clean up xfs_bui_item_recover iget/trans_alloc/ilock ordering
xfs: clean up bmap intent item recovery checking
xfs: xfs_defer_capture should absorb remaining transaction reservation
xfs: xfs_defer_capture should absorb remaining block reservations
xfs: proper replay of deferred ops queued during log recovery
xfs: remove XFS_LI_RECOVERED
...
Pavel Machek complained that the question about supporting deprecated
XFS v4 comes up even when XFS is disabled. This clearly makes no sense,
so fix Kconfig.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Fix some off-by-one errors in xfs_rtalloc_query_range. The highest key
in the realtime bitmap is always one less than the number of rt extents,
which means that the key clamp at the start of the function is wrong.
The 4th argument to xfs_rtfind_forw is the highest rt extent that we
want to probe, which means that passing 1 less than the high key is
wrong. Finally, drop the rem variable that controls the loop because we
can compare the iteration point (rtstart) against the high key directly.
The sordid history of this function is that the original commit (fb3c3)
incorrectly passed (high_rec->ar_startblock - 1) as the 'limit' parameter
to xfs_rtfind_forw. This was wrong because the "high key" is supposed
to be the largest key for which the caller wants result rows, not the
key for the first row that could possibly be outside the range that the
caller wants to see.
A subsequent attempt (8ad56) to strengthen the parameter checking added
incorrect clamping of the parameters to the number of rt blocks in the
system (despite the bitmap functions all taking units of rt extents) to
avoid querying ranges past the end of rt bitmap file but failed to fix
the incorrect _rtfind_forw parameter. The original _rtfind_forw
parameter error then survived the conversion of the startblock and
blockcount fields to rt extents (a0e5c), and the most recent off-by-one
fix (a3a37) thought it was patching a problem when the end of the rt
volume is not in use, but none of these fixes actually solved the
original problem that the author was confused about the "limit" argument
to xfs_rtfind_forw.
Sadly, all four of these patches were written by this author and even
his own usage of this function and rt testing were inadequate to get
this fixed quickly.
Original-problem: fb3c3de2f6 ("xfs: add a couple of queries to iterate free extents in the rtbitmap")
Not-fixed-by: 8ad560d256 ("xfs: strengthen rtalloc query range checks")
Not-fixed-by: a0e5c435ba ("xfs: fix xfs_rtalloc_rec units")
Fixes: a3a374bf18 ("xfs: fix off-by-one error in xfs_rtalloc_query_range")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
- Clean up the buffer ioend calling path so that the retry strategy
isn't quite so scattered everywhere.
- Clean up m_sb_bp handling.
- New feature: storing inode btree counts in the AGI to speed up certain
mount time per-AG block reservation operatoins and add a little more
metadata redundancy.
- New feature: Widen inode timestamps and quota grace expiration
timestamps to support dates through the year 2486.
- Get rid of more of our custom buffer allocation API wrappers.
- Use a proper VLA for shortform xattr structure namevals.
- Force the log after reflinking or deduping into a file that is opened
with O_SYNC or O_DSYNC.
- Fix some math errors in the realtime allocator.
-----BEGIN PGP SIGNATURE-----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=99iy
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.10-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"The biggest changes are two new features for the ondisk metadata: one
to record the sizes of the inode btrees in the AG to increase
redundancy checks and to improve mount times; and a second new feature
to support timestamps until the year 2486.
We also fixed a problem where reflinking into a file that requires
synchronous writes wouldn't actually flush the updates to disk; clean
up a fair amount of cruft; and started fixing some bugs in the
realtime volume code.
Summary:
- Clean up the buffer ioend calling path so that the retry strategy
isn't quite so scattered everywhere.
- Clean up m_sb_bp handling.
- New feature: storing inode btree counts in the AGI to speed up
certain mount time per-AG block reservation operatoins and add a
little more metadata redundancy.
- New feature: Widen inode timestamps and quota grace expiration
timestamps to support dates through the year 2486.
- Get rid of more of our custom buffer allocation API wrappers.
- Use a proper VLA for shortform xattr structure namevals.
- Force the log after reflinking or deduping into a file that is
opened with O_SYNC or O_DSYNC.
- Fix some math errors in the realtime allocator"
* tag 'xfs-5.10-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (42 commits)
xfs: ensure that fpunch, fcollapse, and finsert operations are aligned to rt extent size
xfs: make sure the rt allocator doesn't run off the end
xfs: Remove unneeded semicolon
xfs: force the log after remapping a synchronous-writes file
xfs: Convert xfs_attr_sf macros to inline functions
xfs: Use variable-size array for nameval in xfs_attr_sf_entry
xfs: Remove typedef xfs_attr_shortform_t
xfs: remove typedef xfs_attr_sf_entry_t
xfs: Remove kmem_zalloc_large()
xfs: enable big timestamps
xfs: trace timestamp limits
xfs: widen ondisk quota expiration timestamps to handle y2038+
xfs: widen ondisk inode timestamps to deal with y2038+
xfs: redefine xfs_ictimestamp_t
xfs: redefine xfs_timestamp_t
xfs: move xfs_log_dinode_to_disk to the log recovery code
xfs: refactor quota timestamp coding
xfs: refactor default quota grace period setting code
xfs: refactor quota expiration timer modification
xfs: explicitly define inode timestamp range
...
Use XFS_ILOCK_RT{BITMAP,SUM} to annotate grabbing the rt bitmap and
summary locks when we grow the realtime volume, just like we do most
everywhere else. This shuts up lockdep warnings about grabbing the
ILOCK class of locks recursively:
============================================
WARNING: possible recursive locking detected
5.9.0-rc4-djw #rc4 Tainted: G O
--------------------------------------------
xfs_growfs/4841 is trying to acquire lock:
ffff888035acc230 (&xfs_nondir_ilock_class){++++}-{3:3}, at: xfs_ilock+0xac/0x1a0 [xfs]
but task is already holding lock:
ffff888035acedb0 (&xfs_nondir_ilock_class){++++}-{3:3}, at: xfs_ilock+0xac/0x1a0 [xfs]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&xfs_nondir_ilock_class);
lock(&xfs_nondir_ilock_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
When we call growfs on the data device, we update the secondary
superblocks to reflect the updated filesystem geometry. We need to do
this for growfs on the realtime volume too, because a future xfs_repair
run could try to fix the filesystem using a backup superblock.
This was observed by the online superblock scrubbers while running
xfs/233. One can also trigger this by growing an rt volume, cycling the
mount, and creating new rt files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
The realtime bitmap and summary files are regular files that are hidden
away from the directory tree. Since they're regular files, inode
inactivation will try to purge what it thinks are speculative
preallocations beyond the incore size of the file. Unfortunately,
xfs_growfs_rt forgets to update the incore size when it resizes the
inodes, with the result that inactivating the rt inodes at unmount time
will cause their contents to be truncated.
Fix this by updating the incore size when we change the ondisk size as
part of updating the superblock. Note that we don't do this when we're
allocating blocks to the rt inodes because we actually want those blocks
to get purged if the growfs fails.
This fixes corruption complaints from the online rtsummary checker when
running xfs/233. Since that test requires rmap, one can also trigger
this by growing an rt volume, cycling the mount, and creating rt files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
The formatting is strange in xfs_trans_mod_dquot, so do a reindent.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If we pass in XFS_QMOPT_{U,G,P}QUOTA flags and different uid/gid/prid
than them currently associated with the inode, the arguments
O_{u,g,p}dqpp shouldn't be NULL, so add the ASSERT for them.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Refactor xfs_getfsmap to improve its performance: instead of indirectly
calling a function that copies one record to userspace at a time, create
a shadow buffer in the kernel and copy the whole array once at the end.
On the author's computer, this reduces the runtime on his /home by ~20%.
This also eliminates a deadlock when running GETFSMAP against the
realtime device. The current code locks the rtbitmap to create
fsmappings and copies them into userspace, having not released the
rtbitmap lock. If the userspace buffer is an mmap of a sparse file that
itself resides on the realtime device, the write page fault will recurse
into the fs for allocation, which will deadlock on the rtbitmap lock.
Fixes: 4c934c7dd6 ("xfs: report realtime space information via the rtbitmap")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
If userspace asked fsmap to count the number of entries, we cannot
return more than UINT_MAX entries because fmh_entries is u32.
Therefore, stop counting if we hit this limit or else we will waste time
to return truncated results.
Fixes: e89c041338 ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Now that we have the ability to ask the log how far the tail needs to be
pushed to maintain its free space targets, augment the decision to relog
an intent item so that we only do it if the log has hit the 75% full
threshold. There's no point in relogging an intent into the same
checkpoint, and there's no need to relog if there's plenty of free space
in the log.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Separate the computation of the log push threshold and the push logic in
xlog_grant_push_ail. This enables higher level code to determine (for
example) that it is holding on to a logged intent item and the log is so
busy that it is more than 75% full. In that case, it would be desirable
to move the log item towards the head to release the tail, which we will
cover in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There's a subtle design flaw in the deferred log item code that can lead
to pinning the log tail. Taking up the defer ops chain examples from
the previous commit, we can get trapped in sequences like this:
Caller hands us a transaction t0 with D0-D3 attached. The defer ops
chain will look like the following if the transaction rolls succeed:
t1: D0(t0), D1(t0), D2(t0), D3(t0)
t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0)
t3: d5(t1), D1(t0), D2(t0), D3(t0)
...
t9: d9(t7), D3(t0)
t10: D3(t0)
t11: d10(t10), d11(t10)
t12: d11(t10)
In transaction 9, we finish d9 and try to roll to t10 while holding onto
an intent item for D3 that we logged in t0.
The previous commit changed the order in which we place new defer ops in
the defer ops processing chain to reduce the maximum chain length. Now
make xfs_defer_finish_noroll capable of relogging the entire chain
periodically so that we can always move the log tail forward. Most
chains will never get relogged, except for operations that generate very
long chains (large extents containing many blocks with different sharing
levels) or are on filesystems with small logs and a lot of ongoing
metadata updates.
Callers are now required to ensure that the transaction reservation is
large enough to handle logging done items and new intent items for the
maximum possible chain length. Most callers are careful to keep the
chain lengths low, so the overhead should be minimal.
The decision to relog an intent item is made based on whether the intent
was logged in a previous checkpoint, since there's no point in relogging
an intent into the same checkpoint.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The defer ops code has been finishing items in the wrong order -- if a
top level defer op creates items A and B, and finishing item A creates
more defer ops A1 and A2, we'll put the new items on the end of the
chain and process them in the order A B A1 A2. This is kind of weird,
since it's convenient for programmers to be able to think of A and B as
an ordered sequence where all the sub-tasks for A must finish before we
move on to B, e.g. A A1 A2 D.
Right now, our log intent items are not so complex that this matters,
but this will become important for the atomic extent swapping patchset.
In order to maintain correct reference counting of extents, we have to
unmap and remap extents in that order, and we want to complete that work
before moving on to the next range that the user wants to swap. This
patch fixes defer ops to satsify that requirement.
The primary symptom of the incorrect order was noticed in an early
performance analysis of the atomic extent swap code. An astonishingly
large number of deferred work items accumulated when userspace requested
an atomic update of two very fragmented files. The cause of this was
traced to the same ordering bug in the inner loop of
xfs_defer_finish_noroll.
If the ->finish_item method of a deferred operation queues new deferred
operations, those new deferred ops are appended to the tail of the
pending work list. To illustrate, say that a caller creates a
transaction t0 with four deferred operations D0-D3. The first thing
defer ops does is roll the transaction to t1, leaving us with:
t1: D0(t0), D1(t0), D2(t0), D3(t0)
Let's say that finishing each of D0-D3 will create two new deferred ops.
After finish D0 and roll, we'll have the following chain:
t2: D1(t0), D2(t0), D3(t0), d4(t1), d5(t1)
d4 and d5 were logged to t1. Notice that while we're about to start
work on D1, we haven't actually completed all the work implied by D0
being finished. So far we've been careful (or lucky) to structure the
dfops callers such that D1 doesn't depend on d4 or d5 being finished,
but this is a potential logic bomb.
There's a second problem lurking. Let's see what happens as we finish
D1-D3:
t3: D2(t0), D3(t0), d4(t1), d5(t1), d6(t2), d7(t2)
t4: D3(t0), d4(t1), d5(t1), d6(t2), d7(t2), d8(t3), d9(t3)
t5: d4(t1), d5(t1), d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4)
Let's say that d4-d11 are simple work items that don't queue any other
operations, which means that we can complete each d4 and roll to t6:
t6: d5(t1), d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4)
t7: d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4)
...
t11: d10(t4), d11(t4)
t12: d11(t4)
<done>
When we try to roll to transaction #12, we're holding defer op d11,
which we logged way back in t4. This means that the tail of the log is
pinned at t4. If the log is very small or there are a lot of other
threads updating metadata, this means that we might have wrapped the log
and cannot get roll to t11 because there isn't enough space left before
we'd run into t4.
Let's shift back to the original failure. I mentioned before that I
discovered this flaw while developing the atomic file update code. In
that scenario, we have a defer op (D0) that finds a range of file blocks
to remap, creates a handful of new defer ops to do that, and then asks
to be continued with however much work remains.
So, D0 is the original swapext deferred op. The first thing defer ops
does is rolls to t1:
t1: D0(t0)
We try to finish D0, logging d1 and d2 in the process, but can't get all
the work done. We log a done item and a new intent item for the work
that D0 still has to do, and roll to t2:
t2: D0'(t1), d1(t1), d2(t1)
We roll and try to finish D0', but still can't get all the work done, so
we log a done item and a new intent item for it, requeue D0 a second
time, and roll to t3:
t3: D0''(t2), d1(t1), d2(t1), d3(t2), d4(t2)
If it takes 48 more rolls to complete D0, then we'll finally dispense
with D0 in t50:
t50: D<fifty primes>(t49), d1(t1), ..., d102(t50)
We then try to roll again to get a chain like this:
t51: d1(t1), d2(t1), ..., d101(t50), d102(t50)
...
t152: d102(t50)
<done>
Notice that in rolling to transaction #51, we're holding on to a log
intent item for d1 that was logged in transaction #1. This means that
the tail of the log is pinned at t1. If the log is very small or there
are a lot of other threads updating metadata, this means that we might
have wrapped the log and cannot roll to t51 because there isn't enough
space left before we'd run into t1. This is of course problem #2 again.
But notice the third problem with this scenario: we have 102 defer ops
tied to this transaction! Each of these items are backed by pinned
kernel memory, which means that we risk OOM if the chains get too long.
Yikes. Problem #1 is a subtle logic bomb that could hit someone in the
future; problem #2 applies (rarely) to the current upstream, and problem
#3 applies to work under development.
This is not how incremental deferred operations were supposed to work.
The dfops design of logging in the same transaction an intent-done item
and a new intent item for the work remaining was to make it so that we
only have to juggle enough deferred work items to finish that one small
piece of work. Deferred log item recovery will find that first
unfinished work item and restart it, no matter how many other intent
items might follow it in the log. Therefore, it's ok to put the new
intents at the start of the dfops chain.
For the first example, the chains look like this:
t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0)
t3: d5(t1), D1(t0), D2(t0), D3(t0)
...
t9: d9(t7), D3(t0)
t10: D3(t0)
t11: d10(t10), d11(t10)
t12: d11(t10)
For the second example, the chains look like this:
t1: D0(t0)
t2: d1(t1), d2(t1), D0'(t1)
t3: d2(t1), D0'(t1)
t4: D0'(t1)
t5: d1(t4), d2(t4), D0''(t4)
...
t148: D0<50 primes>(t147)
t149: d101(t148), d102(t148)
t150: d102(t148)
<done>
This actually sucks more for pinning the log tail (we try to roll to t10
while holding an intent item that was logged in t1) but we've solved
problem #1. We've also reduced the maximum chain length from:
sum(all the new items) + nr_original_items
to:
max(new items that each original item creates) + nr_original_items
This solves problem #3 by sharply reducing the number of defer ops that
can be attached to a transaction at any given time. The change makes
the problem of log tail pinning worse, but is improvement we need to
solve problem #2. Actually solving #2, however, is left to the next
patch.
Note that a subsequent analysis of some hard-to-trigger reflink and COW
livelocks on extremely fragmented filesystems (or systems running a lot
of IO threads) showed the same symptoms -- uncomfortably large numbers
of incore deferred work items and occasional stalls in the transaction
grant code while waiting for log reservations. I think this patch and
the next one will also solve these problems.
As originally written, the code used list_splice_tail_init instead of
list_splice_init, so change that, and leave a short comment explaining
our actions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In xfs_bui_item_recover, there exists a use-after-free bug with regards
to the inode that is involved in the bmap replay operation. If the
mapping operation does not complete, we call xfs_bmap_unmap_extent to
create a deferred op to finish the unmapping work, and we retain a
pointer to the incore inode.
Unfortunately, the very next thing we do is commit the transaction and
drop the inode. If reclaim tears down the inode before we try to finish
the defer ops, we dereference garbage and blow up. Therefore, create a
way to join inodes to the defer ops freezer so that we can maintain the
xfs_inode reference until we're done with the inode.
Note: This imposes the requirement that there be enough memory to keep
every incore inode in memory throughout recovery.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In most places in XFS, we have a specific order in which we gather
resources: grab the inode, allocate a transaction, then lock the inode.
xfs_bui_item_recover doesn't do it in that order, so fix it to be more
consistent. This also makes the error bailout code a bit less weird.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The bmap intent item checking code in xfs_bui_item_recover is spread all
over the function. We should check the recovered log item at the top
before we allocate any resources or do anything else, so do that.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When xfs_defer_capture extracts the deferred ops and transaction state
from a transaction, it should record the transaction reservation type
from the old transaction so that when we continue the dfops chain, we
still use the same reservation parameters.
Doing this means that the log item recovery functions get to determine
the transaction reservation instead of abusing tr_itruncate in yet
another part of xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When xfs_defer_capture extracts the deferred ops and transaction state
from a transaction, it should record the remaining block reservations so
that when we continue the dfops chain, we can reserve the same number of
blocks to use. We capture the reservations for both data and realtime
volumes.
This adds the requirement that every log intent item recovery function
must be careful to reserve enough blocks to handle both itself and all
defer ops that it can queue. On the other hand, this enables us to do
away with the handwaving block estimation nonsense that was going on in
xlog_finish_defer_ops.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we replay unfinished intent items that have been recovered from the
log, it's possible that the replay will cause the creation of more
deferred work items. As outlined in commit 509955823c ("xfs: log
recovery should replay deferred ops in order"), later work items have an
implicit ordering dependency on earlier work items. Therefore, recovery
must replay the items (both recovered and created) in the same order
that they would have been during normal operation.
For log recovery, we enforce this ordering by using an empty transaction
to collect deferred ops that get created in the process of recovering a
log intent item to prevent them from being committed before the rest of
the recovered intent items. After we finish committing all the
recovered log items, we allocate a transaction with an enormous block
reservation, splice our huge list of created deferred ops into that
transaction, and commit it, thereby finishing all those ops.
This is /really/ hokey -- it's the one place in XFS where we allow
nested transactions; the splicing of the defer ops list is is inelegant
and has to be done twice per recovery function; and the broken way we
handle inode pointers and block reservations cause subtle use-after-free
and allocator problems that will be fixed by this patch and the two
patches after it.
Therefore, replace the hokey empty transaction with a structure designed
to capture each chain of deferred ops that are created as part of
recovering a single unfinished log intent. Finally, refactor the loop
that replays those chains to do so using one transaction per chain.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The ->iop_recover method of a log intent item removes the recovered
intent item from the AIL by logging an intent done item and committing
the transaction, so it's superfluous to have this flag check. Nothing
else uses it, so get rid of the flag entirely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove this one-line helper since the assert is trivially true in one
call site and the rest obscures a bitmask operation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Nathan popped up on #xfs and pointed out that we fail to handle
finobt btree blocks in xlog_recover_get_buf_lsn(). This means they
always fall through the entire magic number matching code to "recover
immediately". Whilst most of the time this is the correct behaviour,
occasionally it will be incorrect and could potentially overwrite
more recent metadata because we don't check the LSN in the on disk
metadata at all.
This bug has been present since the finobt was first introduced, and
is a potential cause of the occasional xfs_iget_check_free_state()
failures we see that indicate that the inode btree state does not
match the on disk inode state.
Fixes: aafc3c2465 ("xfs: support the XFS_BTNUM_FINOBT free inode btree type")
Reported-by: Nathan Scott <nathans@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
These optionr were for Irix compatibility, probably for clustered XFS
clients in a heterogenous cluster which contained both Irix & Linux
machines, so that behavior would be consistent. That doesn't exist anymore
and it's no longer needed.
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: actually state when the sysctls go away]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
ikeep/noikeep was a workaround for old DMAPI code which is no longer
relevant.
attr2/noattr2 - is for controlling upgrade behaviour from fixed attribute
fork sizes in the inode (attr1) and dynamic attribute fork sizes (attr2).
mkfs has defaulted to setting attr2 since 2007, hence just about every
XFS filesystem out there in production right now uses attr2.
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix minor typos]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current create and mkdir handlers both call the xfs_vn_mknod()
which is a wrapper routine around xfs_generic_create() function.
Actually the create and mkdir handlers can directly call
xfs_generic_create() function and reduce the call chain.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
During code review, I noticed that the rmap code uses the (slower)
shared mappings rmap functions for any extent of a reflinked file, even
if those extents are for the attr fork, which doesn't support sharing.
We can speed up rmap a tiny bit by optimizing out this case.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Since commit 1c1c6ebcf5 ("xfs: Replace per-ag array with a radix
tree"), there is no m_peraglock anymore, so it's hard to understand
the described situation since per-ag is no longer an array and no
need to reallocate, call xfs_filestream_flush() in growfs.
In addition, the race condition for shrink feature is quite confusing
to me currently as well. Get rid of it instead.
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cleanup the typedef usage, the unnecessary parentheses, the unnecessary
backslash and use the open-coded round_up call in
xfs_attr_leaf_entsize_{remote,local}.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We should do the assert for all the log intent-done items if they appear
here. This patch detect intent-done items by the fact that their item ops
don't have iop_unpin and iop_push methods and also move the helper
xlog_item_is_intent to xfs_trans.h.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since we never use the second parameter id, so remove it from
xfs_qm_dqattach_one() function.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We already check whether the crc feature is enabled before calling
xfs_attr3_rmt_verify(), so remove the redundant feature check in that
function.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix the comments to help people understand the code.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
[darrick: fix the indenting problems too]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Since the type prid_t and xfs_dqid_t both are uint32_t, seems the
type cast is unnecessary, so remove it.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We have already defined the project ID type prid_t, so maybe should
use it here.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are no callers of the SYNCHRONIZE() macro, so remove it.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Let's use DIV_ROUND_UP() to calculate log record header
blocks as what did in xlog_get_iclog_buffer_size() and
wrap up a common helper for log recovery.
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently, crafted h_len has been blocked for the log
header of the tail block in commit a70f9fe52d ("xfs:
detect and handle invalid iclog size set by mkfs").
However, each log record could still have crafted h_len
and cause log record buffer overrun. So let's check
h_len vs buffer size for each log record as well.
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Nowadays, log recovery will call ->release on the recovered intent items
if recovery fails. Therefore, it's redundant to release them from
inside the ->recover functions when they're about to return an error.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In the bmap intent item recovery code, we must be careful to attach the
inode to its dquots (if quotas are enabled) so that a change in the
shape of the bmap btree doesn't cause the quota counters to be
incorrect.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
During a code inspection, I found a serious bug in the log intent item
recovery code when an intent item cannot complete all the work and
decides to requeue itself to get that done. When this happens, the
item recovery creates a new incore deferred op representing the
remaining work and attaches it to the transaction that it allocated. At
the end of _item_recover, it moves the entire chain of deferred ops to
the dummy parent_tp that xlog_recover_process_intents passed to it, but
fail to log a new intent item for the remaining work before committing
the transaction for the single unit of work.
xlog_finish_defer_ops logs those new intent items once recovery has
finished dealing with the intent items that it recovered, but this isn't
sufficient. If the log is forced to disk after a recovered log item
decides to requeue itself and the system goes down before we call
xlog_finish_defer_ops, the second log recovery will never see the new
intent item and therefore has no idea that there was more work to do.
It will finish recovery leaving the filesystem in a corrupted state.
The same logic applies to /any/ deferred ops added during intent item
recovery, not just the one handling the remaining work.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When xchk_da_btree_block is loading a non-root dabtree block, we know
that the parent block had to have a (hashval, address) pointer to the
block that we just loaded. Check that the hashval in the parent matches
the block we just loaded.
This was found by fuzzing nbtree[3].hashval = ones in xfs/394.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When callers pass XFS_BMAPI_REMAP into xfs_bunmapi, they want the extent
to be unmapped from the given file fork without the extent being freed.
We do this for non-rt files, but we forgot to do this for realtime
files. So far this isn't a big deal since nobody makes a bunmapi call
to a rt file with the REMAP flag set, but don't leave a logic bomb.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xfs_growfs_rt(), we enlarge bitmap and summary files by allocating
new blocks for both files. For each of the new blocks allocated, we
allocate an xfs_buf, zero the payload, log the contents and commit the
transaction. Hence these buffers will eventually find themselves
appended to list at xfs_ail->ail_buf_list.
Later, xfs_growfs_rt() loops across all of the new blocks belonging to
the bitmap inode to set the bitmap values to 1. In doing so, it
allocates a new transaction and invokes the following sequence of
functions,
- xfs_rtfree_range()
- xfs_rtmodify_range()
- xfs_rtbuf_get()
We pass '&xfs_rtbuf_ops' as the ops pointer to xfs_trans_read_buf().
- xfs_trans_read_buf()
We find the xfs_buf of interest in per-ag hash table, invoke
xfs_buf_reverify() which ends up assigning '&xfs_rtbuf_ops' to
xfs_buf->b_ops.
On the other hand, if xfs_growfs_rt_alloc() had allocated a few blocks
for the bitmap inode and returned with an error, all the xfs_bufs
corresponding to the new bitmap blocks that have been allocated would
continue to be on xfs_ail->ail_buf_list list without ever having a
non-NULL value assigned to their b_ops members. An AIL flush operation
would then trigger the following warning message to be printed on the
console,
XFS (loop0): _xfs_buf_ioapply: no buf ops on daddr 0x58 len 8
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
CPU: 3 PID: 449 Comm: xfsaild/loop0 Not tainted 5.8.0-rc4-chandan-00038-g4d8c2b9de9ab-dirty #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
dump_stack+0x57/0x70
_xfs_buf_ioapply+0x37c/0x3b0
? xfs_rw_bdev+0x1e0/0x1e0
? xfs_buf_delwri_submit_buffers+0xd4/0x210
__xfs_buf_submit+0x6d/0x1f0
xfs_buf_delwri_submit_buffers+0xd4/0x210
xfsaild+0x2c8/0x9e0
? __switch_to_asm+0x42/0x70
? xfs_trans_ail_cursor_first+0x80/0x80
kthread+0xfe/0x140
? kthread_park+0x90/0x90
ret_from_fork+0x22/0x30
This message indicates that the xfs_buf had its b_ops member set to
NULL.
This commit fixes the issue by assigning "&xfs_rtbuf_ops" to b_ops
member of each of the xfs_bufs logged by xfs_growfs_rt_alloc().
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The following sequence of commands,
mkfs.xfs -f -m reflink=0 -r rtdev=/dev/loop1,size=10M /dev/loop0
mount -o rtdev=/dev/loop1 /dev/loop0 /mnt
xfs_growfs /mnt
... causes the following call trace to be printed on the console,
XFS: Assertion failed: (bip->bli_flags & XFS_BLI_STALE) || (xfs_blft_from_flags(&bip->__bli_format) > XFS_BLFT_UNKNOWN_BUF && xfs_blft_from_flags(&bip->__bli_format) < XFS_BLFT_MAX_BUF), file: fs/xfs/xfs_buf_item.c, line: 331
Call Trace:
xfs_buf_item_format+0x632/0x680
? kmem_alloc_large+0x29/0x90
? kmem_alloc+0x70/0x120
? xfs_log_commit_cil+0x132/0x940
xfs_log_commit_cil+0x26f/0x940
? xfs_buf_item_init+0x1ad/0x240
? xfs_growfs_rt_alloc+0x1fc/0x280
__xfs_trans_commit+0xac/0x370
xfs_growfs_rt_alloc+0x1fc/0x280
xfs_growfs_rt+0x1a0/0x5e0
xfs_file_ioctl+0x3fd/0xc70
? selinux_file_ioctl+0x174/0x220
ksys_ioctl+0x87/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x3e/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This occurs because the buffer being formatted has the value of
XFS_BLFT_UNKNOWN_BUF assigned to the 'type' subfield of
bip->bli_formats->blf_flags.
This commit fixes the issue by assigning one of XFS_BLFT_RTSUMMARY_BUF
and XFS_BLFT_RTBITMAP_BUF to the 'type' subfield of
bip->bli_formats->blf_flags before committing the corresponding
transaction.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode extent truncate path unmaps extents from the inode block
mapping, finishes deferred ops to free the associated extents and
then explicitly rolls the transaction before processing the next
extent. The latter extent roll is spurious as xfs_defer_finish()
always returns a clean transaction and automatically relogs inodes
attached to the transaction (with lock_flags == 0). This can
unnecessarily increase the number of log ticket regrants that occur
during a long running truncate operation. Remove the explicit
transaction roll.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This helper is useful for both THPs and for supporting block size larger
than page size. Convert all users that I could find (we have a few
different ways of writing this idiom, and I may have missed some).
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
The V4 filesystem format contains known weaknesses in the on-disk format
that make metadata verification diffiult. In addition, the format does
not support dates past 2038 and will not be upgraded to do so. We
should start the process of retiring the old format to close off attack
surfaces and to encourage users to migrate onto V5.
Therefore, make XFS V4 support a configurable option. For the first
period it will be default Y in case some distributors want to withdraw
support early; for the second period it will be default N so that anyone
who wishes to continue support can do so; and after that, support will
be removed from the kernel. Dates for these events have been added to
the upstream kernel.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
While running generic/042 with -drtinherit=1 set in MKFS_OPTIONS, I
observed that the kernel will gladly set the realtime flag on any file
created on the loopback filesystem even though that filesystem doesn't
actually have a realtime device attached. This leads to verifier
failures and doesn't make any sense, so be smarter about this.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Make sure that any fallocate operation that requires the range to be
block-aligned also checks that the range is aligned to the realtime
extent size.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Hoist the code that propagates di_flags and di_flags2 from a parent to a
new child into separate functions. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There's an overflow bug in the realtime allocator. If the rt volume is
large enough to handle a single allocation request that is larger than
the maximum bmap extent length and the rt bitmap ends exactly on a
bitmap block boundary, it's possible that the near allocator will try to
check the freeness of a range that extends past the end of the bitmap.
This fails with a corruption error and shuts down the fs.
Therefore, constrain maxlen so that the range scan cannot run off the
end of the rt bitmap.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes coccicheck warning:
fs/xfs/xfs_icache.c:1214:2-3: Unneeded semicolon
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Commit 5833112df7 tried to make it so that a remap operation would
force the log out to disk if the filesystem is mounted with mandatory
synchronous writes. Unfortunately, that commit failed to handle the
case where the inode or the file descriptor require mandatory
synchronous writes.
Refactor the check into into a helper that will look for all three
conditions, and now we can treat reflink just like any other synchronous
write.
Fixes: 5833112df7 ("xfs: reflink should force the log out if mounted with wsync")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_attr_sf_totsize() requires access to xfs_inode structure, so, once
xfs_attr_shortform_addname() is its only user, move it to xfs_attr.c
instead of playing with more #includes.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
nameval is a variable-size array, so, define it as it, and remove all
the -1 magic number subtractions
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This patch aims to replace kmem_zalloc_large() with global kernel memory
API. So, all its callers are now using kvzalloc() directly, so kmalloc()
fallsback to vmalloc() automatically.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Enable the big timestamp feature.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a couple of tracepoints so that we can check the timestamp limits
being set on inodes and quotas.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Enable the bigtime feature for quota timers. We decrease the accuracy
of the timers to ~4s in exchange for being able to set timers up to the
bigtime maximum.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Redesign the ondisk inode timestamps to be a simple unsigned 64-bit
counter of nanoseconds since 14 Dec 1901 (i.e. the minimum time in the
32-bit unix time epoch). This enables us to handle dates up to 2486,
which solves the y2038 problem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Redefine xfs_ictimestamp_t as a uint64_t typedef in preparation for the
bigtime functionality. Preserve the legacy structure format so that we
can let the compiler take care of the masking and shifting.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Redefine xfs_timestamp_t as a __be64 typedef in preparation for the
bigtime functionality. Preserve the legacy structure format so that we
can let the compiler take care of masking and shifting.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Move this function to xfs_inode_item_recover.c since there's only one
caller of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Refactor quota timestamp encoding and decoding into helper functions so
that we can add extra behavior in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Refactor the code that sets the default quota grace period into a helper
function so that we can override the ondisk behavior later.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Define explicit limits on the range of quota grace period expiration
timeouts and refactor the code that modifies the timeouts into helpers
that clamp the values appropriately. Note that we'll refactor the
default grace period timer separately.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Formally define the inode timestamp ranges that existing filesystems
support, and switch the vfs timetamp ranges to use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add the necessary bits to the online repair code to support logging the
inode btree counters when rebuilding the btrees, and to support fixing
the counters when rebuilding the AGI.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add the necessary bits to the online scrub code to check the inode btree
counters when enabled.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we have reliable finobt block counts, use them to speed up the
per-AG block reservation calculations at mount time.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a btree block usage counters for both inode btrees to the AGI header
so that we don't have to walk the entire finobt at mount time to create
the per-AG reservations.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Instead of poking deeply into buffer cache internals when re-reading the
superblock during log recovery just generalize _xfs_buf_read and use it
there. Note that we don't have to explicitly set up the ops as they
must be set from the initial read.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Merge xfs_getsb into its only caller, and clean that one up a little bit
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the mp argument as this function is only called in transaction
context, and open code xfs_getsb given that the function already accesses
the buffer pointer in the mount point directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The log recovery I/O completion handler does not substancially differ from
the normal one except for the fact that it:
a) never retries failed writes
b) can have log items that aren't on the AIL
c) never has inode/dquot log items attached and thus don't need to
handle them
Add conditionals for (a) and (b) to the ioend code, while (c) doesn't
need special handling anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Clear the flags at the end of xfs_buf_ioend so that they can be used
during the completion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reuse xfs_buf_item_relse instead of duplicating it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that all the actual error handling is in a single place,
xfs_buf_ioend_disposition just needs to return true if took ownership of
the buffer, or false if not instead of the tristate. Also move the
error check back in the caller to optimize for the fast path, and give
the function a better fitting name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep all the error handling code together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Merge xfs_buf_ioerror_retry into its only caller to make the resubmission
flow a little easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_buf_ioerror_fail_without_retry is a somewhat weird function in
that it has two trivial checks that decide the return value, while
the rest implements a ratelimited warning. Just lift the two checks
into the caller, and give the remainder a suitable name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
No need to keep a separate helper for this logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the buffer retry state machine logic to xfs_buf.c and call it once
from xfs_ioend instead of duplicating it three times for the three kinds
of buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the log recovery I/O completion handling entirely into the log
recovery code, and re-arrange the normal I/O completion handler flow
to prepare to lifting more logic into common code in the next commits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Handle the no-error case in xfs_buf_iodone_error as well, and to clarify
the code rename the function, use the actual enum type as return value
and then switch on it in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
With the recent rework of the inode cluster flushing, we no longer
ever wait on the the inode flush "lock". It was never a lock in the
first place, just a completion to allow callers to wait for inode IO
to complete. We now never wait for flush completion as all inode
flushing is non-blocking. Hence we can get rid of all the iflock
infrastructure and instead just set and check a state flag.
Rename the XFS_IFLOCK flag to XFS_IFLUSHING, convert all the
xfs_iflock_nowait() test-and-set operations on that flag, and
replace all the xfs_ifunlock() calls to clear operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove kmem_realloc() function and convert its users to use MM API
directly (krealloc())
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
- Fix a broken metadata verifier that would incorrectly validate attr
fork extents of a realtime file against the realtime volume.
-----BEGIN PGP SIGNATURE-----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=5U8o
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"Fix a broken metadata verifier that would incorrectly validate attr
fork extents of a realtime file against the realtime volume"
* tag 'xfs-5.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix xfs_bmap_validate_extent_raw when checking attr fork of rt files
When running in a dax mode, if the user maps a page with MAP_PRIVATE and
PROT_WRITE, the xfs filesystem would incorrectly update ctime and mtime
when the user hits a COW fault.
This breaks building of the Linux kernel. How to reproduce:
1. extract the Linux kernel tree on dax-mounted xfs filesystem
2. run make clean
3. run make -j12
4. run make -j12
at step 4, make would incorrectly rebuild the whole kernel (although it
was already built in step 3).
The reason for the breakage is that almost all object files depend on
objtool. When we run objtool, it takes COW page fault on its .data
section, and these faults will incorrectly update the timestamp of the
objtool binary. The updated timestamp causes make to rebuild the whole
tree.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The realtime flag only applies to the data fork, so don't use the
realtime block number checks on the attr fork of a realtime file.
Fixes: 30b0984d91 ("xfs: refactor bmap record validation")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
- Avoid a log recovery failure for an insert range operation by rolling
deferred ops incrementally instead of at the end.
- Fix an off-by-one error when calculating log space reservations for
anything involving an inode allocation or free.
- Fix a broken shortform xattr verifier.
- Ensure that the shortform xattr header padding is always initialized
to zero.
-----BEGIN PGP SIGNATURE-----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=9IZj
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Various small corruption fixes that have come in during the past
month:
- Avoid a log recovery failure for an insert range operation by
rolling deferred ops incrementally instead of at the end.
- Fix an off-by-one error when calculating log space reservations for
anything involving an inode allocation or free.
- Fix a broken shortform xattr verifier.
- Ensure that the shortform xattr header padding is always
initialized to zero"
* tag 'xfs-5.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: initialize the shortform attr header padding entry
xfs: fix boundary test in xfs_attr_shortform_verify
xfs: fix off-by-one in inode alloc block reservation calculation
xfs: finish dfops on every insert range shift iteration
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl9JG9wACgkQnJ2qBz9k
QNlp3ggA3B/Xopb2X3cCpf2fFw63YGJU4i0XJxi+3fC/v6m8U+D4XbqJUjaM5TZz
+4XABQf7OHvSwDezc3n6KXXD/zbkZCeVm9aohEXvfMYLyKbs+S7QNQALHEtpfBUU
3IY2pQ90K7JT9cD9pJls/Y/EaA1ObWP7+3F1zpw8OutGchKcE8SvVjzL3SSJaj7k
d8OTtMosAFuTe4saFWfsf9CmZzbx4sZw3VAzXEXAArrxsmqFKIcY8dI8TQ0WaYNh
C3wQFvW+n9wHapylyi7RhGl2QH9Tj8POfnCTahNFFJbsmJBx0Z3r42mCBAk4janG
FW+uDdH5V780bTNNVUKz0v4C/YDiKg==
=jQnW
-----END PGP SIGNATURE-----
Merge tag 'writeback_for_v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull writeback fixes from Jan Kara:
"Fixes for writeback code occasionally skipping writeback of some
inodes or livelocking sync(2)"
* tag 'writeback_for_v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
writeback: Drop I_DIRTY_TIME_EXPIRE
writeback: Fix sync livelock due to b_dirty_time processing
writeback: Avoid skipping inode writeback
writeback: Protect inode->i_io_list with inode->i_lock
Don't leak kernel memory contents into the shortform attr fork.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The boundary test for the fixed-offset parts of xfs_attr_sf_entry in
xfs_attr_shortform_verify is off by one, because the variable array
at the end is defined as nameval[1] not nameval[].
Hence we need to subtract 1 from the calculation.
This can be shown by:
# touch file
# setfattr -n root.a file
and verifications will fail when it's written to disk.
This only matters for a last attribute which has a single-byte name
and no value, otherwise the combination of namelen & valuelen will
push endp further out and this test won't fail.
Fixes: 1e1bbd8e7e ("xfs: create structure verifier function for shortform xattrs")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The inode chunk allocation transaction reserves inobt_maxlevels-1
blocks to accommodate a full split of the inode btree. A full split
requires an allocation for every existing level and a new root
block, which means inobt_maxlevels is the worst case block
requirement for a transaction that inserts to the inobt. This can
lead to a transaction block reservation overrun when tmpfile
creation allocates an inode chunk and expands the inobt to its
maximum depth. This problem has been observed in conjunction with
overlayfs, which makes frequent use of tmpfiles internally.
The existing reservation code goes back as far as the Linux git repo
history (v2.6.12). It was likely never observed as a problem because
the traditional file/directory creation transactions also include
worst case block reservation for directory modifications, which most
likely is able to make up for a single block deficiency in the inode
allocation portion of the calculation. tmpfile support is relatively
more recent (v3.15), less heavily used, and only includes the inode
allocation block reservation as tmpfiles aren't linked into the
directory tree on creation.
Fix up the inode alloc block reservation macro and a couple of the
block allocator minleft parameters that enforce an allocation to
leave enough free blocks in the AG for a full inobt split.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The recent change to make insert range an atomic operation used the
incorrect transaction rolling mechanism. The explicit transaction
roll does not finish deferred operations. This means that intents
for rmapbt updates caused by extent shifts are not logged until the
final transaction commits. Thus if a crash occurs during an insert
range, log recovery might leave the rmapbt in an inconsistent state.
This was discovered by repeated runs of generic/455.
Update insert range to finish dfops on every shift iteration. This
is similar to collapse range and ensures that intents are logged
with the transactions that make associated changes.
Fixes: dd87f87d87 ("xfs: rework insert range into an atomic operation")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
- Fix duplicated words in comments.
- Fix an ubsan complaint about null pointer arithmetic.
-----BEGIN PGP SIGNATURE-----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=GBnh
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.9-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Two small fixes that have come in during the past week:
- Fix duplicated words in comments
- Fix an ubsan complaint about null pointer arithmetic"
* tag 'xfs-5.9-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Fix UBSAN null-ptr-deref in xfs_sysfs_init
xfs: delete duplicated words + other fixes
If xfs_sysfs_init is called with parent_kobj == NULL, UBSAN
shows the following warning:
UBSAN: null-ptr-deref in ./fs/xfs/xfs_sysfs.h:37:23
member access within null pointer of type 'struct xfs_kobj'
Call Trace:
dump_stack+0x10e/0x195
ubsan_type_mismatch_common+0x241/0x280
__ubsan_handle_type_mismatch_v1+0x32/0x40
init_xfs_fs+0x12b/0x28f
do_one_initcall+0xdd/0x1d0
do_initcall_level+0x151/0x1b6
do_initcalls+0x50/0x8f
do_basic_setup+0x29/0x2b
kernel_init_freeable+0x19f/0x20b
kernel_init+0x11/0x1e0
ret_from_fork+0x22/0x30
Fix it by checking parent_kobj before the code accesses its member.
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor whitespace edits]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
- Fix some btree block pingponging problems when swapping extents
- Redesign the reflink copy loop so that we only run one remapping
operation per transaction. This helps us avoid running out of block
reservation on highly deduped filesystems.
- Take the MMAPLOCK around filemap_map_pages.
- Make inode reclaim fully async so that we avoid stalling processes on
flushing inodes to disk.
- Reduce inode cluster buffer RMW cycles by attaching the buffer to
dirty inodes so we won't let go of the cluster buffer when we know
we're going to need it soon.
- Add some more checks to the realtime bitmap file scrubber.
- Don't trip false lockdep warnings in fs freeze.
- Remove various redundant lines of code.
- Remove unnecessary calls to xfs_perag_{get,put}.
- Preserve I_VERSION state across remounts.
- Fix an unmount hang due to AIL going to sleep with a non-empty delwri
buffer list.
- Fix an error in the inode allocation space reservation macro that
caused regressions in generic/531.
- Fix a potential livelock when dquot flush fails because the dquot
buffer is locked.
- Fix a miscalculation when reserving inode quota that could cause users
to exceed a hardlimit.
- Refactor struct xfs_dquot to use native types for incore fields
instead of abusing the ondisk struct for this purpose. This will
eventually enable proper y2038+ support, but for now it merely cleans
up the quota function declarations.
- Actually increment the quota softlimit warning counter so that soft
failures turn into hard(er) failures when they exceed the softlimit
warning counter limits set by the administrator.
- Split incore dquot state flags into their own field and namespace, to
avoid mixing them with quota type flags.
- Create a new quota type flags namespace so that we can make it obvious
when a quota function takes a quota type (user, group, project) as an
argument.
- Rename the ondisk dquot flags field to type, as that more accurately
represents what we store in it.
- Drop our bespoke memory allocation flags in favor of GFP_*.
- Rearrange the xattr functions so that we no longer mix metadata
updates and transaction management (e.g. rolling complex transactions)
in the same functions. This work will prepare us for atomic xattr
operations (itself a prerequisite for directory backrefs) in future
release cycles.
- Support FS_DAX_FL (aka FS_XFLAG_DAX) via GETFLAGS/SETFLAGS.
-----BEGIN PGP SIGNATURE-----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=nhPQ
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.9-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"There are quite a few changes in this release, the most notable of
which is that we've made inode flushing fully asynchronous, and we no
longer block memory reclaim on this.
Furthermore, we have fixed a long-standing bug in the quota code where
soft limit warnings and inode limits were never tracked properly.
Moving further down the line, the reflink control loops have been
redesigned to behave more efficiently; and numerous small bugs have
been fixed (see below). The xattr and quota code have been extensively
refactored in preparation for more new features coming down the line.
Finally, the behavior of DAX between ext4 and xfs has been stabilized,
which gets us a step closer to removing the experimental tag from that
feature.
We have a few new contributors this time around. Welcome, all!
I anticipate a second pull request next week for a few small bugfixes
that have been trickling in, but this is it for big changes.
Summary:
- Fix some btree block pingponging problems when swapping extents
- Redesign the reflink copy loop so that we only run one remapping
operation per transaction. This helps us avoid running out of block
reservation on highly deduped filesystems.
- Take the MMAPLOCK around filemap_map_pages.
- Make inode reclaim fully async so that we avoid stalling processes
on flushing inodes to disk.
- Reduce inode cluster buffer RMW cycles by attaching the buffer to
dirty inodes so we won't let go of the cluster buffer when we know
we're going to need it soon.
- Add some more checks to the realtime bitmap file scrubber.
- Don't trip false lockdep warnings in fs freeze.
- Remove various redundant lines of code.
- Remove unnecessary calls to xfs_perag_{get,put}.
- Preserve I_VERSION state across remounts.
- Fix an unmount hang due to AIL going to sleep with a non-empty
delwri buffer list.
- Fix an error in the inode allocation space reservation macro that
caused regressions in generic/531.
- Fix a potential livelock when dquot flush fails because the dquot
buffer is locked.
- Fix a miscalculation when reserving inode quota that could cause
users to exceed a hardlimit.
- Refactor struct xfs_dquot to use native types for incore fields
instead of abusing the ondisk struct for this purpose. This will
eventually enable proper y2038+ support, but for now it merely
cleans up the quota function declarations.
- Actually increment the quota softlimit warning counter so that soft
failures turn into hard(er) failures when they exceed the softlimit
warning counter limits set by the administrator.
- Split incore dquot state flags into their own field and namespace,
to avoid mixing them with quota type flags.
- Create a new quota type flags namespace so that we can make it
obvious when a quota function takes a quota type (user, group,
project) as an argument.
- Rename the ondisk dquot flags field to type, as that more
accurately represents what we store in it.
- Drop our bespoke memory allocation flags in favor of GFP_*.
- Rearrange the xattr functions so that we no longer mix metadata
updates and transaction management (e.g. rolling complex
transactions) in the same functions. This work will prepare us for
atomic xattr operations (itself a prerequisite for directory
backrefs) in future release cycles.
- Support FS_DAX_FL (aka FS_XFLAG_DAX) via GETFLAGS/SETFLAGS"
* tag 'xfs-5.9-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (117 commits)
fs/xfs: Support that ioctl(SETXFLAGS/GETXFLAGS) can set/get inode DAX on XFS.
xfs: Lift -ENOSPC handler from xfs_attr_leaf_addname
xfs: Simplify xfs_attr_node_addname
xfs: Simplify xfs_attr_leaf_addname
xfs: Add helper function xfs_attr_node_removename_rmt
xfs: Add helper function xfs_attr_node_removename_setup
xfs: Add remote block helper functions
xfs: Add helper function xfs_attr_leaf_mark_incomplete
xfs: Add helpers xfs_attr_is_shortform and xfs_attr_set_shortform
xfs: Remove xfs_trans_roll in xfs_attr_node_removename
xfs: Remove unneeded xfs_trans_roll_inode calls
xfs: Add helper function xfs_attr_node_shrink
xfs: Pull up xfs_attr_rmtval_invalidate
xfs: Refactor xfs_attr_rmtval_remove
xfs: Pull up trans roll in xfs_attr3_leaf_clearflag
xfs: Factor out xfs_attr_rmtval_invalidate
xfs: Pull up trans roll from xfs_attr3_leaf_setflag
xfs: Refactor xfs_attr_try_sf_addname
xfs: Split apart xfs_attr_leaf_addname
xfs: Pull up trans handling in xfs_attr3_leaf_flipflags
...
- Make sure we call ->iomap_end with a failure code if ->iomap_begin
failed in any way; some filesystems need to try to undo things.
- Don't invalidate the page cache during direct reads since we already
sync'd the cache with disk.
- Make direct writes fall back to the page cache if the pre-write
cache invalidation fails. This avoids a cache coherency problem.
- Fix some idiotic virus scanner warning bs in the previous tag.
-----BEGIN PGP SIGNATURE-----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=rjsZ
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.9-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"The most notable changes are:
- iomap no longer invalidates the page cache when performing a direct
read, since doing so is unnecessary and the old directio code
doesn't do that either.
- iomap embraced the use of returning ENOTBLK from a direct write to
trigger falling back to a buffered write since ext4 already did
this and btrfs wants it for their port.
- iomap falls back to buffered writes if we're doing a direct write
and the page cache invalidation after the flush fails; this was
necessary to handle a corner case in the btrfs port.
- Remove email virus scanner detritus that was accidentally included
in yesterday's pull request. Clearly I need(ed) to update my git
branch checker scripts. :("
* tag 'iomap-5.9-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: fall back to buffered writes for invalidation failures
xfs: use ENOTBLK for direct I/O to buffered I/O fallback
iomap: Only invalidate page cache pages on direct IO writes
iomap: Make sure iomap_end is called after iomap_begin
Failing to invalid the page cache means data in incoherent, which is
a very bad state for the system. Always fall back to buffered I/O
through the page cache if we can't invalidate mappings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu> # for ext4
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> # for gfs2
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
This is what the classic fs/direct-io.c implementation and thuse other
file systems use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Delete repeated words in fs/xfs/.
{we, that, the, a, to, fork}
Change "it it" to "it is" in one location.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
To: linux-fsdevel@vger.kernel.org
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl8m7asQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgplrCD/0S17kio+k4cOJDGwl88WoJw+QiYmM5019k
decZ1JymQvV1HXRmlcZiEAu0hHDD0FoovSRrw7II3gw3GouETmYQM62f6ZTpDeMD
CED/fidnfULAkPaI6h+bj3jyI0cEuujG/R47rGSQEkIIr3RttqKZUzVkB9KN+KMw
+OBuXZtMIoFFEVJ91qwC2dm2qHLqOn1/5MlT59knso/xbPOYOXsFQpGiACJqF97x
6qSSI8uGE+HZqvL2OLWPDBbLEJhrq+dzCgxln5VlvLele4UcRhOdonUb7nUwEKCe
zwvtXzz16u1D1b8bJL4Kg5bGqyUAQUCSShsfBJJxh6vTTULiHyCX5sQaai1OEB16
4dpBL9E+nOUUix4wo9XBY0/KIYaPWg5L1CoEwkAXqkXPhFvNUucsC0u6KvmzZR3V
1OogVTjl6GhS8uEVQjTKNshkTIC9QHEMXDUOHtINDCb/sLU+ANXU5UpvsuzZ9+kt
KGc4mdyCwaKBq4YW9sVwhhq/RHLD4AUtWZiUVfOE+0cltCLJUNMbQsJ+XrcYaQnm
W4zz22Rep+SJuQNVcCW/w7N2zN3yB6gC1qeroSLvzw4b5el2TdFp+BcgVlLHK+uh
xjsGNCq++fyzNk7vvMZ5hVq4JGXYjza7AiP5HlQ8nqdiPUKUPatWCBqUm9i9Cz/B
n+0dlYbRwQ==
=2vmy
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Lots of cleanups in here, hardening the code and/or making it easier
to read and fixing bugs, but a core feature/change too adding support
for real async buffered reads. With the latter in place, we just need
buffered write async support and we're done relying on kthreads for
the fast path. In detail:
- Cleanup how memory accounting is done on ring setup/free (Bijan)
- sq array offset calculation fixup (Dmitry)
- Consistently handle blocking off O_DIRECT submission path (me)
- Support proper async buffered reads, instead of relying on kthread
offload for that. This uses the page waitqueue to drive retries
from task_work, like we handle poll based retry. (me)
- IO completion optimizations (me)
- Fix race with accounting and ring fd install (me)
- Support EPOLLEXCLUSIVE (Jiufei)
- Get rid of the io_kiocb unionizing, made possible by shrinking
other bits (Pavel)
- Completion side cleanups (Pavel)
- Cleanup REQ_F_ flags handling, and kill off many of them (Pavel)
- Request environment grabbing cleanups (Pavel)
- File and socket read/write cleanups (Pavel)
- Improve kiocb_set_rw_flags() (Pavel)
- Tons of fixes and cleanups (Pavel)
- IORING_SQ_NEED_WAKEUP clear fix (Xiaoguang)"
* tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block: (127 commits)
io_uring: flip if handling after io_setup_async_rw
fs: optimise kiocb_set_rw_flags()
io_uring: don't touch 'ctx' after installing file descriptor
io_uring: get rid of atomic FAA for cq_timeouts
io_uring: consolidate *_check_overflow accounting
io_uring: fix stalled deferred requests
io_uring: fix racy overflow count reporting
io_uring: deduplicate __io_complete_rw()
io_uring: de-unionise io_kiocb
io-wq: update hash bits
io_uring: fix missing io_queue_linked_timeout()
io_uring: mark ->work uninitialised after cleanup
io_uring: deduplicate io_grab_files() calls
io_uring: don't do opcode prep twice
io_uring: clear IORING_SQ_NEED_WAKEUP after executing task works
io_uring: batch put_task_struct()
tasks: add put_task_struct_many()
io_uring: return locked and pinned page accounting
io_uring: don't miscount pinned memory
io_uring: don't open-code recv kbuf managment
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl8m7YwQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpt+dEAC7a0HYuX2OrkyawBnsgd1QQR/soC7surec
yDDa7SMM8cOq3935bfzcYHV9FWJszEGIknchiGb9R3/T+vmSohbvDsM5zgwya9u/
FHUIuTq324I6JWXKl30k4rwjiX9wQeMt+WZ5gC8KJYCWA296i2IpJwd0A45aaKuS
x4bTjxqknE+fD4gQiMUSt+bmuOUAp81fEku3EPapCRYDPAj8f5uoY7R2arT/POwB
b+s+AtXqzBymIqx1z0sZ/XcdZKmDuhdurGCWu7BfJFIzw5kQ2Qe3W8rUmrQ3pGut
8a21YfilhUFiBv+B4wptfrzJuzU6Ps0BXHCnBsQjzvXwq5uFcZH495mM/4E4OJvh
SbjL2K4iFj+O1ngFkukG/F8tdEM1zKBYy2ZEkGoWKUpyQanbAaGI6QKKJA+DCdBi
yPEb7yRAa5KfLqMiocm1qCEO1I56HRiNHaJVMqCPOZxLmpXj19Fs71yIRplP1Trv
GGXdWZsccjuY6OljoXWdEfnxAr5zBsO3Yf2yFT95AD+egtGsU1oOzlqAaU1mtflw
ABo452pvh6FFpxGXqz6oK4VqY4Et7WgXOiljA4yIGoPpG/08L1Yle4eVc2EE01Jb
+BL49xNJVeUhGFrvUjPGl9kVMeLmubPFbmgrtipW+VRg9W8+Yirw7DPP6K+gbPAR
RzAUdZFbWw==
=abJG
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Good amount of cleanups and tech debt removals in here, and as a
result, the diffstat shows a nice net reduction in code.
- Softirq completion cleanups (Christoph)
- Stop using ->queuedata (Christoph)
- Cleanup bd claiming (Christoph)
- Use check_events, moving away from the legacy media change
(Christoph)
- Use inode i_blkbits consistently (Christoph)
- Remove old unused writeback congestion bits (Christoph)
- Cleanup/unify submission path (Christoph)
- Use bio_uninit consistently, instead of bio_disassociate_blkg
(Christoph)
- sbitmap cleared bits handling (John)
- Request merging blktrace event addition (Jan)
- sysfs add/remove race fixes (Luis)
- blk-mq tag fixes/optimizations (Ming)
- Duplicate words in comments (Randy)
- Flush deferral cleanup (Yufen)
- IO context locking/retry fixes (John)
- struct_size() usage (Gustavo)
- blk-iocost fixes (Chengming)
- blk-cgroup IO stats fixes (Boris)
- Various little fixes"
* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
block: blk-timeout: delete duplicated word
block: blk-mq-sched: delete duplicated word
block: blk-mq: delete duplicated word
block: genhd: delete duplicated words
block: elevator: delete duplicated word and fix typos
block: bio: delete duplicated words
block: bfq-iosched: fix duplicated word
iocost_monitor: start from the oldest usage index
iocost: Fix check condition of iocg abs_vdebt
block: Remove callback typedefs for blk_mq_ops
block: Use non _rcu version of list functions for tag_set_list
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
...
1) FS_DAX_FL has been introduced by commit b383a73f2b.
2) In future, chattr/lsattr command from e2fsprogs can set/get
inode DAX on XFS by calling ioctl(SETXFLAGS/GETXFLAGS).
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Lift -ENOSPC handler from xfs_attr_leaf_addname. This will help to
reorganize transitions between the attr forms later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Invert the rename logic in xfs_attr_node_addname to simplify the
delayed attr logic later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Invert the rename logic in xfs_attr_leaf_addname to simplify the
delayed attr logic later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch adds another new helper function
xfs_attr_node_removename_rmt. This will also help modularize
xfs_attr_node_removename when we add delay ready attributes later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch adds a new helper function xfs_attr_node_removename_setup.
This will help modularize xfs_attr_node_removename when we add delay
ready attributes later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
[darrick: fix unused variable complaints by 0day robot]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
This patch adds two new helper functions xfs_attr_store_rmt_blk and
xfs_attr_restore_rmt_blk. These two helpers assist to remove redundant
code associated with storing and retrieving remote blocks during the
attr set operations.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch helps to simplify xfs_attr_node_removename by modularizing
the code around the transactions into helper functions. This will make
the function easier to follow when we introduce delayed attributes.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
In this patch, we hoist code from xfs_attr_set_args into two new helpers
xfs_attr_is_shortform and xfs_attr_set_shortform. These two will help
to simplify xfs_attr_set_args when we get into delayed attrs later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
A transaction roll is not necessary immediately after setting the
INCOMPLETE flag when removing a node xattr entry with remote value
blocks. The remote block invalidation that immediately follows setting
the flag is an in-core only change. The next step after that is to start
unmapping the remote blocks from the attr fork, but the xattr remove
transaction reservation includes reservation for full tree splits of the
dabtree and bmap tree. The remote block unmap code will roll the
transaction as extents are unmapped and freed.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Some calls to xfs_trans_roll_inode and xfs_defer_finish routines are not
needed. If they are the last operations executed in these functions, and
no further changes are made, then higher level routines will roll or
commit the transactions.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch adds a new helper function xfs_attr_node_shrink used to
shrink an attr name into an inode if it is small enough. This helps to
modularize the greater calling function xfs_attr_node_removename.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch pulls xfs_attr_rmtval_invalidate out of
xfs_attr_rmtval_remove and into the calling functions. Eventually
__xfs_attr_rmtval_remove will replace xfs_attr_rmtval_remove when we
introduce delayed attributes. These functions are exepcted to return
-EAGAIN when they need a new transaction. Because the invalidate does
not need a new transaction, we need to separate it from the rest of the
function that does. This will enable __xfs_attr_rmtval_remove to
smoothly replace xfs_attr_rmtval_remove later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Refactor xfs_attr_rmtval_remove to add helper function
__xfs_attr_rmtval_remove. We will use this later when we introduce
delayed attributes. This function will eventually replace
xfs_attr_rmtval_remove
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
New delayed allocation routines cannot be handling transactions so
pull them out into the calling functions
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Because new delayed attribute routines cannot roll transactions, we
carve off the parts of xfs_attr_rmtval_remove that we can use. This
will help to reduce repetitive code later when we introduce delayed
attributes.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
New delayed allocation routines cannot be handling transactions so
pull them up into the calling functions
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
To help pre-simplify xfs_attr_set_args, we need to hoist transaction
handling up, while modularizing the adjacent code down into helpers. In
this patch, hoist the commit in xfs_attr_try_sf_addname up into the
calling function, and also pull the attr list creation down.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Split out new helper function xfs_attr_leaf_try_add from
xfs_attr_leaf_addname. Because new delayed attribute routines cannot
roll transactions, we split off the parts of xfs_attr_leaf_addname that
we can use, and move the commit into the calling function.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Since delayed operations cannot roll transactions, pull up the
transaction handling into the calling function
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Break xfs_attr_rmtval_set into two helper functions
xfs_attr_rmt_find_hole and xfs_attr_rmtval_set_value.
xfs_attr_rmtval_set rolls the transaction between the helpers, but
delayed operations cannot. We will use the helpers later when
constructing new delayed attribute routines.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Delayed operations cannot return error codes. So we must check for
these conditions first before starting set or remove operations
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch adds a new functions to check for the existence of an
attribute. Subroutines are also added to handle the cases of leaf
blocks, nodes or shortform. Common code that appears in existing attr
add and remove functions have been factored out to help reduce the
appearance of duplicated code. We will need these routines later for
delayed attributes since delayed operations cannot return error codes.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix a leak-on-error bug reported by Dan Carpenter]
[darrick: fix unused variable warning reported by 0day]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reported-by: dan.carpenter@oracle.com
Reported-by: kernel test robot <lkp@intel.com>
Every call to xfs_da_state_alloc() also requires setting up state->args
and state->mp
Change xfs_da_state_alloc() to receive an xfs_da_args_t as argument and
return a xfs_da_state_t with both args and mp already set.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: reduce struct typedef usage]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
All their users have been converted to use MM API directly, no need to
keep them around anymore.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
xlog_ticket_alloc() is always called under NOFS context, except from
unmount path, which eitherway is holding many FS locks, so, there is no
need for its callers to keep passing allocation flags into it.
change xlog_ticket_alloc() to use default kmem_cache_zalloc(), remove
its alloc_flags argument, and always use GFP_NOFS | __GFP_NOFAIL flags.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use kmem_cache_zalloc() directly.
With the exception of xlog_ticket_alloc() which will be dealt on the
next patch for readability.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use kmem_cache_alloc() directly.
All kmem_zone_alloc() users pass 0 as flags, which are translated into:
GFP_KERNEL | __GFP_NOWARN, and kmem_zone_alloc() loops forever until the
allocation succeeds.
We can use __GFP_NOFAIL to tell the allocator to loop forever rather
than doing it ourself, and because the allocation will never fail, we do
not need to use __GFP_NOWARN anymore. Hence, all callers can be
converted to use GFP_KERNEL | __GFP_NOFAIL
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: add a comment back in about nofail]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Drop the repeated words "with" and "be" in comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The ondisk dquot stores the quota record type in the flags field.
Rename this field to d_type to make the _type relationship between the
ondisk and incore dquot more obvious.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create an XFS_DQTYPE_ANY mask for ondisk dquots flags, and use that to
ensure that we never accept any garbage flags when we're loading dquots.
While we're at it, restructure the quota type flag checking to use the
proper masking.
Note that I plan to add y2038 support soon, which will require a new
xfs_dqtype_t flag for extended timestamp support, hence all the work to
make the type masking work correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new type (xfs_dqtype_t) to represent the type of an incore
dquot (user, group, project, or none). Rename the incore dquot's
dq_flags field to q_type.
This allows us to replace all the "uint type" arguments to the quota
functions with "xfs_dqtype_t type", to make it obvious when we're
passing a quota type argument into a function.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix a few places where we open-coded this mask constant.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When XFS' quota functions take a parameter for the quota type, they only
care about the three quota record types (user, group, project).
Internal state flags and whatnot should never be passed by callers and
are an error. Now that we've moved responsibility for filtering out
internal state to the callers, we can drop the masking everywhere else.
In other words, if you call a quota function, you must only pass in
one of XFS_DQTYPE_{USER,GROUP,PROJ}.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Always use the xfs_dquot_type helper to extract the quota type from an
incore dquot. This moves responsibility for filtering internal state
information and whatnot to anybody passing around a struct xfs_dquot.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Certain functions can only act upon one quota type, so refactor those
functions to use switch statements, in keeping with all the other high
level xfs quota api calls.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove these macros and use xfs_dquot_type() for everything.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a small helper to test if enforcement is enabled for a
given incore dquot and replace the open-code logic testing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We're going to split up the incore dquot state flags from the ondisk
dquot flags (eventually renaming this "type") so start by renaming the
three flags and the bitmask that are going to participate in this.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_qm_reset_dqcounts (aka quotacheck) is the only xfs_dqblk_verify
caller that actually knows the specific quota type that it's looking
for. Since everything else just pass in type==0 (including the buffer
verifier), drop the parameter and open-code the check like
xfs_dquot_from_disk already does.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add all the xfs_dquot fields to the tracepoint for that type; add a new
tracepoint type for the qtrx structure (dquot transaction deltas); and
use our new tracepoints. This makes it easier for the author to trace
changes to dquot counters for debugging.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently, xfs quotas have the ability to send netlink warnings when a
user exceeds the limits. They also have all the support code necessary
to convert softlimit warnings into failures if the number of warnings
exceeds a limit set by the administrator. Unfortunately, we never
actually increase the warning counter, so this never actually happens.
Make it so we actually do something useful with the warning counts.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
We always initialize the default quota limits to something nowadays, so
we don't need to check that the defaults are set to something before
using them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Hoist the code that adjusts the incore quota reservation count
adjustments into a separate function, both to reduce the level of
indentation and also to reduce the amount of open-coded logic.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've refactored the resource usage and limits into
per-resource structures, we can refactor some of the open-coded
reservation limit checking in xfs_trans_dqresv.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we can pass around quota resource and limit structures, clean
up the open-coded field setting in xfs_qm_scall_setqlim.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Refactor the open-coded test for whether or not we're over quota.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
struct xfs_dquot already has a pointer to the xfs mount, so remove the
redundant parameter from xfs_qm_adjust_dq*.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've split up the dquot resource fields into separate structs,
do the same for the default limits to enable further refactoring.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've stopped using qcore entirely, drop it from the incore
dquot.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add timers fields to the incore dquot, and use that instead of the ones
in qcore. This eliminates a bunch of endian conversions and will
eventually allow us to remove qcore entirely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Add warning counter fields to the incore dquot, and use that instead of
the ones in qcore. This eliminates a bunch of endian conversions and
will eventually allow us to remove qcore entirely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Add counter fields to the incore dquot, and use that instead of the ones
in qcore. This eliminates a bunch of endian conversions and will
eventually allow us to remove qcore entirely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Add limits fields in the incore dquot, and use that instead of the ones
in qcore. This eliminates a bunch of endian conversions and will
eventually allow us to remove qcore entirely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Introduce a new struct xfs_dquot_res that we'll use to track all the
incore data for a particular resource type (block, inode, rt block).
This will help us (once we've eliminated q_core) to declutter quota
functions that currently open-code field access or pass around fields
around explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Add a dquot id field to the incore dquot, and use that instead of the
one in qcore. This eliminates a bunch of endian conversions and will
eventually allow us to remove qcore entirely.
We also rearrange the start of xfs_dquot to remove padding holes, saving
8 bytes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Use the incore dq_flags to figure out the dquot type. This is the first
step towards removing xfs_disk_dquot from the incore dquot.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Move the dquot cluster size #define to xfs_format.h. It is an important
part of the ondisk format because the ondisk dquot record size is not an
even power of two, which means that the buffer size we use is
significant here because the kernel leaves slack space at the end of the
buffer to avoid having to deal with a dquot record crossing a block
boundary.
This is also an excuse to fix one of the longstanding discrepancies
between kernel and userspace libxfs headers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Rename the existing incore dquot "dq_flags" field to "q_flags" to match
everything else in the structure, then move the two actual dquot state
flags to the XFS_DQFLAG_ namespace from XFS_DQ_.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
We only use the XFS_QMOPT flags in quotacheck to signal the quota type,
so rip out all the flags handling and just pass the type all the way
through.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Since xfs_qm_scall_trunc_qfiles can take a bitset of quota types that we
want to truncate, change the flags argument to take XFS_QMOPT_[UGP}QUOTA
so that the next patch can start to deprecate XFS_DQ_*.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
While loading dquot records off disk, make sure that the quota type
flags are the same between the incore dquot and the ondisk dquot.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
xfs_trans_dqresv is the function that we use to make reservations
against resource quotas. Each resource contains two counters: the
q_core counter, which tracks resources allocated on disk; and the dquot
reservation counter, which tracks how much of that resource has either
been allocated or reserved by threads that are working on metadata
updates.
For disk blocks, we compare the proposed reservation counter against the
hard and soft limits to decide if we're going to fail the operation.
However, for inodes we inexplicably compare against the q_core counter,
not the incore reservation count.
Since the q_core counter is always lower than the reservation count and
we unlock the dquot between reservation and transaction commit, this
means that multiple threads can reserve the last inode count before we
hit the hard limit, and when they commit, we'll be well over the hard
limit.
Fix this by checking against the incore inode reservation counter, since
we would appear to maintain that correctly (and that's what we report in
GETQUOTA).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit 8d3d7e2b35, we changed xfs_qm_dqpurge to bail out if we
can't lock the dquot buf to flush the dquot. This prevents the AIL from
blocking on the dquot, but it also forgets to clear the FREEING flag on
its way out. A subsequent purge attempt will see the FREEING flag is
set and bail out, which leads to dqpurge_all failing to purge all the
dquots.
(copy-pasting from Dave Chinner's identical patch)
This was found by inspection after having xfs/305 hang 1 in ~50
iterations in a quotaoff operation:
[ 8872.301115] xfs_quota D13888 92262 91813 0x00004002
[ 8872.302538] Call Trace:
[ 8872.303193] __schedule+0x2d2/0x780
[ 8872.304108] ? do_raw_spin_unlock+0x57/0xd0
[ 8872.305198] schedule+0x6e/0xe0
[ 8872.306021] schedule_timeout+0x14d/0x300
[ 8872.307060] ? __next_timer_interrupt+0xe0/0xe0
[ 8872.308231] ? xfs_qm_dqusage_adjust+0x200/0x200
[ 8872.309422] schedule_timeout_uninterruptible+0x2a/0x30
[ 8872.310759] xfs_qm_dquot_walk.isra.0+0x15a/0x1b0
[ 8872.311971] xfs_qm_dqpurge_all+0x7f/0x90
[ 8872.313022] xfs_qm_scall_quotaoff+0x18d/0x2b0
[ 8872.314163] xfs_quota_disable+0x3a/0x60
[ 8872.315179] kernel_quotactl+0x7e2/0x8d0
[ 8872.316196] ? __do_sys_newstat+0x51/0x80
[ 8872.317238] __x64_sys_quotactl+0x1e/0x30
[ 8872.318266] do_syscall_64+0x46/0x90
[ 8872.319193] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 8872.320490] RIP: 0033:0x7f46b5490f2a
[ 8872.321414] Code: Bad RIP value.
Returning -EAGAIN from xfs_qm_dqpurge() without clearing the
XFS_DQ_FREEING flag means the xfs_qm_dqpurge_all() code can never
free the dquot, and we loop forever waiting for the XFS_DQ_FREEING
flag to go away on the dquot that leaked it via -EAGAIN.
Fixes: 8d3d7e2b35 ("xfs: trylock underlying buffer on dquot flush")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The block reservation calculation for inode allocation is supposed
to consist of the blocks required for the inode chunk plus
(maxlevels-1) of the inode btree multiplied by the number of inode
btrees in the fs (2 when finobt is enabled, 1 otherwise).
Instead, the macro returns (ialloc_blocks + 2) due to a precedence
error in the calculation logic. This leads to block reservation
overruns via generic/531 on small block filesystems with finobt
enabled. Add braces to fix the calculation and reserve the
appropriate number of blocks.
Fixes: 9d43b180af ("xfs: update inode allocation/free transaction reservations for finobt")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfsaild is racy with respect to transaction abort and shutdown in
that the task can idle or exit with an empty AIL but buffers still
on the delwri queue. This was partly addressed by cancelling the
delwri queue before the task exits to prevent memory leaks, but it's
also possible for xfsaild to empty and idle with buffers on the
delwri queue. For example, a transaction that pins a buffer that
also happens to sit on the AIL delwri queue will explicitly remove
the associated log item from the AIL if the transaction aborts. The
side effect of this is an unmount hang in xfs_wait_buftarg() as the
associated buffers remain held by the delwri queue indefinitely.
This is reproduced on repeated runs of generic/531 with an fs format
(-mrmapbt=1 -bsize=1k) that happens to also reproduce transaction
aborts.
Update xfsaild to not idle until both the AIL and associated delwri
queue are empty and update the push code to continue delwri queue
submission attempts even when the AIL is empty. This allows the AIL
to eventually release aborted buffers stranded on the delwri queue
when they are unlocked by the associated transaction. This should
have no significant effect on normal runtime behavior because the
xfsaild currently idles only when the AIL is empty and in practice
the AIL is rarely empty with a populated delwri queue. The items
must be AIL resident to land in the queue in the first place and
generally aren't removed until writeback completes.
Note that the pre-existing delwri queue cancel logic in the exit
path is retained because task stop is external, could technically
come at any point, and xfsaild is still responsible to release its
buffer references before it exits.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The MS_I_VERSION mount flag is exposed via the VFS, as documented
in the mount manpages etc; see the iversion and noiversion mount
options in mount(8).
As a result, mount -o remount looks for this option in /proc/mounts
and will only send the I_VERSION flag back in during remount it it
is present. Since it's not there, a remount will /remove/ the
I_VERSION flag at the vfs level, and iversion functionality is lost.
xfs v5 superblocks intend to always have i_version enabled; it is
set as a default at mount time, but is lost during remount for the
reasons above.
The generic fix would be to expose this documented option in
/proc/mounts, but since that was rejected, fix it up again in the
xfs remount path instead, so that at least xfs won't suffer from
this misbehavior.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
These two definitions are unused now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
In the course of some operations, we look up the perag from
the mount multiple times to get or change perag information.
These are often very short pieces of code, so while the
lookup cost is generally low, the cost of the lookup is far
higher than the cost of the operation we are doing on the
perag.
Since we changed buffers to hold references to the perag
they are cached in, many modification contexts already hold
active references to the perag that are held across these
operations. This is especially true for any operation that
is serialised by an allocation group header buffer.
In these cases, we can just use the buffer's reference to
the perag to avoid needing to do lookups to access the
perag. This means that many operations don't need to do
perag lookups at all to access the perag because they've
already looked up objects that own persistent references
and hence can use that reference instead.
Cc: Dave Chinner <dchinner@redhat.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Depending on the workloads, the following circular locking dependency
warning between sb_internal (a percpu rwsem) and fs_reclaim (a pseudo
lock) may show up:
======================================================
WARNING: possible circular locking dependency detected
5.0.0-rc1+ #60 Tainted: G W
------------------------------------------------------
fsfreeze/4346 is trying to acquire lock:
0000000026f1d784 (fs_reclaim){+.+.}, at:
fs_reclaim_acquire.part.19+0x5/0x30
but task is already holding lock:
0000000072bfc54b (sb_internal){++++}, at: percpu_down_write+0xb4/0x650
which lock already depends on the new lock.
:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sb_internal);
lock(fs_reclaim);
lock(sb_internal);
lock(fs_reclaim);
*** DEADLOCK ***
4 locks held by fsfreeze/4346:
#0: 00000000b478ef56 (sb_writers#8){++++}, at: percpu_down_write+0xb4/0x650
#1: 000000001ec487a9 (&type->s_umount_key#28){++++}, at: freeze_super+0xda/0x290
#2: 000000003edbd5a0 (sb_pagefaults){++++}, at: percpu_down_write+0xb4/0x650
#3: 0000000072bfc54b (sb_internal){++++}, at: percpu_down_write+0xb4/0x650
stack backtrace:
Call Trace:
dump_stack+0xe0/0x19a
print_circular_bug.isra.10.cold.34+0x2f4/0x435
check_prev_add.constprop.19+0xca1/0x15f0
validate_chain.isra.14+0x11af/0x3b50
__lock_acquire+0x728/0x1200
lock_acquire+0x269/0x5a0
fs_reclaim_acquire.part.19+0x29/0x30
fs_reclaim_acquire+0x19/0x20
kmem_cache_alloc+0x3e/0x3f0
kmem_zone_alloc+0x79/0x150
xfs_trans_alloc+0xfa/0x9d0
xfs_sync_sb+0x86/0x170
xfs_log_sbcount+0x10f/0x140
xfs_quiesce_attr+0x134/0x270
xfs_fs_freeze+0x4a/0x70
freeze_super+0x1af/0x290
do_vfs_ioctl+0xedc/0x16c0
ksys_ioctl+0x41/0x80
__x64_sys_ioctl+0x73/0xa9
do_syscall_64+0x18f/0xd23
entry_SYSCALL_64_after_hwframe+0x49/0xbe
This is a false positive as all the dirty pages are flushed out before
the filesystem can be frozen.
One way to avoid this splat is to add GFP_NOFS to the affected allocation
calls by using the memalloc_nofs_save()/memalloc_nofs_restore() pair.
This shouldn't matter unless the system is really running out of memory.
In that particular case, the filesystem freeze operation may fail while
it was succeeding previously.
Without this patch, the command sequence below will show that the lock
dependency chain sb_internal -> fs_reclaim exists.
# fsfreeze -f /home
# fsfreeze --unfreeze /home
# grep -i fs_reclaim -C 3 /proc/lockdep_chains | grep -C 5 sb_internal
After applying the patch, such sb_internal -> fs_reclaim lock dependency
chain can no longer be found. Because of that, the locking dependency
warning will not be shown.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Make sure the rtbitmap is large enough to store the entire bitmap.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Ensure that the realtime bitmap file is backed entirely by written
extents. No holes, no unwritten blocks, etc.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
This debug code is called on every xfs_iflush() call, which then
checks every inode in the buffer for non-zero unlinked list field.
Hence it checks every inode in the cluster buffer every time a
single inode on that cluster it flushed. This is resulting in:
- 38.91% 5.33% [kernel] [k] xfs_iflush
- 17.70% xfs_iflush
- 9.93% xfs_inobp_check
4.36% xfs_buf_offset
10% of the CPU time spent flushing inodes is repeatedly checking
unlinked fields in the buffer. We don't need to do this.
The other place we call xfs_inobp_check() is
xfs_iunlink_update_dinode(), and this is after we've done this
assert for the agino we are about to write into that inode:
ASSERT(xfs_verify_agino_or_null(mp, agno, next_agino));
which means we've already checked that the agino we are about to
write is not 0 on debug kernels. The inode buffer verifiers do
everything else we need, so let's just remove this debug code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_iflush_done() does 3 distinct operations to the inodes attached
to the buffer. Separate these operations out into functions so that
it is easier to modify these operations independently in future.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we have all the dirty inodes attached to the cluster
buffer, we don't actually have to do radix tree lookups to find
them. Sure, the radix tree is efficient, but walking a linked list
of just the dirty inodes attached to the buffer is much better.
We are also no longer dependent on having a locked inode passed into
the function to determine where to start the lookup. This means we
can drop it from the function call and treat all inodes the same.
We also make xfs_iflush_cluster skip inodes marked with
XFS_IRECLAIM. This we avoid races with inodes that reclaim is
actively referencing or are being re-initialised by inode lookup. If
they are actually dirty, they'll get written by a future cluster
flush....
We also add a shutdown check after obtaining the flush lock so that
we catch inodes that are dirty in memory and may have inconsistent
state due to the shutdown in progress. We abort these inodes
directly and so they remove themselves directly from the buffer list
and the AIL rather than having to wait for the buffer to be failed
and callbacks run to be processed correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
with xfs_iflush() gone, we can rename xfs_iflush_int() back to
xfs_iflush(). Also move it up above xfs_iflush_cluster() so we don't
need the forward definition any more.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now we have a cached buffer on inode log items, we don't need
to do buffer lookups when flushing inodes anymore - all we need
to do is lock the buffer and we are ready to go.
This largely gets rid of the need for xfs_iflush(), which is
essentially just a mechanism to look up the buffer and flush the
inode to it. Instead, we can just call xfs_iflush_cluster() with a
few modifications to ensure it also flushes the inode we already
hold locked.
This allows the AIL inode item pushing to be almost entirely
non-blocking in XFS - we won't block unless memory allocation
for the cluster inode lookup blocks or the block device queues are
full.
Writeback during inode reclaim becomes a little more complex because
we now have to lock the buffer ourselves, but otherwise this change
is largely a functional no-op that removes a whole lot of code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rather than attach inodes to the cluster buffer just when we are
doing IO, attach the inodes to the cluster buffer when they are
dirtied. The means the buffer always carries a list of dirty inodes
that reference it, and we can use that list to make more fundamental
changes to inode writeback that aren't otherwise possible.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Once we have inodes pinning the cluster buffer and attached whenever
they are dirty, we no longer have a guarantee that the items are
flush locked when we lock the cluster buffer. Hence we cannot just
walk the buffer log item list and modify the attached inodes.
If the inode is not flush locked, we have to ILOCK it first and then
flush lock it to do all the prerequisite checks needed to avoid
races with other code. This is already handled by
xfs_ifree_get_one_inode(), so rework the inode iteration loop and
function to update all inodes in cache whether they are attached to
the buffer or not.
Note: we also remove the copying of the log item lsn to the
ili_flush_lsn as xfs_iflush_done() now uses the XFS_ISTALE flag to
trigger aborts and so flush lsn matching is not needed in IO
completion for processing freed inodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inode reclaim is quite different now to the way described in various
comments, so update all the comments explaining what it does and how
it works.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Clean up xfs_reclaim_inodes() callers. Most callers want blocking
behaviour, so just make the existing SYNC_WAIT behaviour the
default.
For the xfs_reclaim_worker(), just call xfs_reclaim_inodes_ag()
directly because we just want optimistic clean inode reclaim to be
done in the background.
For xfs_quiesce_attr() we can just remove the inode reclaim calls as
they are a historic relic that was required to flush dirty inodes
that contained unlogged changes. We now log all changes to the
inodes, so the sync AIL push from xfs_log_quiesce() called by
xfs_quiesce_attr() will do all the required inode writeback for
freeze.
Seeing as we now want to loop until all reclaimable inodes have been
reclaimed, make xfs_reclaim_inodes() loop on the XFS_ICI_RECLAIM_TAG
tag rather than having xfs_reclaim_inodes_ag() tell it that inodes
were skipped. This is much more reliable and will always loop until
all reclaimable inodes are reclaimed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All background reclaim is SYNC_TRYLOCK already, and even blocking
reclaim (SYNC_WAIT) can use trylock mechanisms as
xfs_reclaim_inodes_ag() will keep cycling until there are no more
reclaimable inodes. Hence we can kill SYNC_TRYLOCK from inode
reclaim and make everything unconditionally non-blocking.
We remove all the optimistic "avoid blocking on locks" checks done
in xfs_reclaim_inode_grab() as nothing blocks on locks anymore.
Further, checking XFS_IFLOCK optimistically can result in detecting
inodes in the process of being cleaned (i.e. between being removed
from the AIL and having the flush lock dropped), so for
xfs_reclaim_inodes() to reliably reclaim all inodes we need to drop
these checks anyway.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we attempt to reclaim an inode, the first thing we do is take
the inode lock. This is blocking right now, so if the inode being
accessed by something else (e.g. being flushed to the cluster
buffer) we will block here.
Change this to a trylock so that we do not block inode reclaim
unnecessarily here.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inode reclaim will still throttle direct reclaim on the per-ag
reclaim locks. This is no longer necessary as reclaim can run
non-blocking now. Hence we can remove these locks so that we don't
arbitrarily block reclaimers just because there are more direct
reclaimers than there are AGs.
This can result in multiple reclaimers working on the same range of
an AG, but this doesn't cause any apparent issues. Optimising the
spread of concurrent reclaimers for best efficiency can be done in a
future patchset.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We no longer need to issue IO from shrinker based inode reclaim to
prevent spurious OOM killer invocation. This leaves only the global
filesystem management operations such as unmount needing to
writeback dirty inodes and reclaim them.
Instead of using the reclaim pass to write dirty inodes before
reclaiming them, use the AIL to push all the dirty inodes before we
try to reclaim them. This allows us to remove all the conditional
SYNC_WAIT locking and the writeback code from xfs_reclaim_inode()
and greatly simplify the checks we need to do to reclaim an inode.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that dirty inode writeback doesn't cause read-modify-write
cycles on the inode cluster buffer under memory pressure, the need
to throttle memory reclaim to the rate at which we can clean dirty
inodes goes away. That is due to the fact that we no longer thrash
inode cluster buffers under memory pressure to clean dirty inodes.
This means inode writeback no longer stalls on memory allocation
or read IO, and hence can be done asynchronously without generating
memory pressure. As a result, blocking inode writeback in reclaim is
no longer necessary to prevent reclaim priority windup as cleaning
dirty inodes is no longer dependent on having memory reserves
available for the filesystem to make progress reclaiming inodes.
Hence we can convert inode reclaim to be non-blocking for shrinker
callouts, both for direct reclaim and kswapd.
On a vanilla kernel, running a 16-way fsmark create workload on a
4 node/16p/16GB RAM machine, I can reliably pin 14.75GB of RAM via
userspace mlock(). The OOM killer gets invoked at 15GB of
pinned RAM.
Without the inode cluster pinning, this non-blocking reclaim patch
triggers premature OOM killer invocation with the same memory
pinning, sometimes with as much as 45% of RAM being free. It's
trivially easy to trigger the OOM killer when reclaim does not
block.
With pinning inode clusters in RAM and then adding this patch, I can
reliably pin 14.5GB of RAM and still have the fsmark workload run to
completion. The OOM killer gets invoked 14.75GB of pinned RAM, which
is only a small amount of memory less than the vanilla kernel. It is
much more reliable than just with async reclaim alone.
simoops shows that allocation stalls go away when async reclaim is
used. Vanilla kernel:
Run time: 1924 seconds
Read latency (p50: 3,305,472) (p95: 3,723,264) (p99: 4,001,792)
Write latency (p50: 184,064) (p95: 553,984) (p99: 807,936)
Allocation latency (p50: 2,641,920) (p95: 3,911,680) (p99: 4,464,640)
work rate = 13.45/sec (avg 13.44/sec) (p50: 13.46) (p95: 13.58) (p99: 13.70)
alloc stall rate = 3.80/sec (avg: 2.59) (p50: 2.54) (p95: 2.96) (p99: 3.02)
With inode cluster pinning and async reclaim:
Run time: 1924 seconds
Read latency (p50: 3,305,472) (p95: 3,715,072) (p99: 3,977,216)
Write latency (p50: 187,648) (p95: 553,984) (p99: 789,504)
Allocation latency (p50: 2,748,416) (p95: 3,919,872) (p99: 4,448,256)
work rate = 13.28/sec (avg 13.32/sec) (p50: 13.26) (p95: 13.34) (p99: 13.34)
alloc stall rate = 0.02/sec (avg: 0.02) (p50: 0.01) (p95: 0.03) (p99: 0.03)
Latencies don't really change much, nor does the work rate. However,
allocation almost never stalls with these changes, whilst the
vanilla kernel is sometimes reporting 20 stalls/s over a 60s sample
period. This difference is due to inode reclaim being largely
non-blocking now.
IOWs, once we have pinned inode cluster buffers, we can make inode
reclaim non-blocking without a major risk of premature and/or
spurious OOM killer invocation, and without any changes to memory
reclaim infrastructure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we dirty an inode, we are going to have to write it disk at
some point in the near future. This requires the inode cluster
backing buffer to be present in memory. Unfortunately, under severe
memory pressure we can reclaim the inode backing buffer while the
inode is dirty in memory, resulting in stalling the AIL pushing
because it has to do a read-modify-write cycle on the cluster
buffer.
When we have no memory available, the read of the cluster buffer
blocks the AIL pushing process, and this causes all sorts of issues
for memory reclaim as it requires inode writeback to make forwards
progress. Allocating a cluster buffer causes more memory pressure,
and results in more cluster buffers to be reclaimed, resulting in
more RMW cycles to be done in the AIL context and everything then
backs up on AIL progress. Only the synchronous inode cluster
writeback in the the inode reclaim code provides some level of
forwards progress guarantees that prevent OOM-killer rampages in
this situation.
Fix this by pinning the inode backing buffer to the inode log item
when the inode is first dirtied (i.e. in xfs_trans_log_inode()).
This may mean the first modification of an inode that has been held
in cache for a long time may block on a cluster buffer read, but
we can do that in transaction context and block safely until the
buffer has been allocated and read.
Once we have the cluster buffer, the inode log item takes a
reference to it, pinning it in memory, and attaches it to the log
item for future reference. This means we can always grab the cluster
buffer from the inode log item when we need it.
When the inode is finally cleaned and removed from the AIL, we can
drop the reference the inode log item holds on the cluster buffer.
Once all inodes on the cluster buffer are clean, the cluster buffer
will be unpinned and it will be available for memory reclaim to
reclaim again.
This avoids the issues with needing to do RMW cycles in the AIL
pushing context, and hence allows complete non-blocking inode
flushing to be performed by the AIL pushing context.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_ail_delete_one() is called directly from dquot and inode IO
completion, as well as from the generic xfs_trans_ail_delete()
function. Inodes are about to have their own failure handling, and
dquots will in future, too. Pull the clearing of the LI_FAILED flag
up into the callers so we can customise the code appropriately.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When an buffer IO error occurs, we want to mark all
the log items attached to the buffer as failed. Open code
the error handling loop so that we can modify the flagging for the
different types of objects directly and independently of each other.
This also allows us to remove the ->iop_error method from the log
item operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently when a buffer with attached log items has an IO error
it called ->iop_error for each attched log item. These all call
xfs_set_li_failed() to handle the error, but we are about to change
the way log items manage buffers. hence we first need to remove the
per-item dependency on buffer handling done by xfs_set_li_failed().
We already have specific buffer type IO completion routines, so move
the log item error handling out of the generic error handling and
into the log item specific functions so we can implement per-type
error handling easily.
This requires a more complex return value from the error handling
code so that we can take the correct action the failure handling
requires. This results in some repeated boilerplate in the
functions, but that can be cleaned up later once all the changes
cascade through this code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
They are not used anymore, so remove them from the log item and the
buffer iodone attachment interfaces.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we've sorted inode and dquot buffers, we can apply the same
cleanups to dirty buffers with buffer log items. They only have one
callback, too, so we don't need the log item callback. Collapse the
iodone functions and remove all the now unnecessary infrastructure
around callback processing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Similar to inodes, we can call the dquot IO completion functions
directly from the buffer completion code, removing another user of
log item callbacks for IO completion processing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Having different io completion callbacks for different inode states
makes things complex. We can detect if the inode is stale via the
XFS_ISTALE flag in IO completion, so we don't need a special
callback just for this.
This means inodes only have a single iodone callback, and inode IO
completion is entirely buffer centric at this point. Hence we no
longer need to use a log item callback at all as we can just call
xfs_iflush_done() directly from the buffer completions and walk the
buffer log item list to complete the all inodes under IO.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we've emptied the buffer log item list, it does a list_del_init
on itself to reset it's pointers to itself. This is unnecessary as
the list is already empty at this point - it was a left-over
fragment from the list_head conversion of the buffer log item list.
Remove them.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All unmarked dirty buffers should be in the AIL and have log items
attached to them. Hence when they are written, we will run a
callback to remove the item from the AIL if appropriate. Now that
we've handled inode and dquot buffers, all remaining calls are to
xfs_buf_iodone() and so we can hard code this rather than use an
indirect call.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Log recovery has it's own buffer write completion handler for
buffers that it directly recovers. Convert these to direct calls by
flagging these buffers as being log recovery buffers. The flag will
get cleared by the log recovery IO completion routine, so it will
never leak out of log recovery.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
dquot buffers always have write IO callbacks, so by marking them
directly we can avoid needing to attach ->b_iodone functions to
them. This avoids an indirect call, and makes future modifications
much simpler.
This is largely a rearrangement of the code at this point - no IO
completion functionality changes at this point, just how the
code is run is modified.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inode buffers always have write IO callbacks, so by marking them
directly we can avoid needing to attach ->b_iodone functions to
them. This avoids an indirect call, and makes future modifications
much simpler.
While this is largely a refactor of existing functionality, we
broaden the scope of the flag to beyond where inodes are explicitly
attached because future changes need to know what type of log items
are attached to the buffer. Adding this buffer flag may invoke the
inode iodone callback in cases where it wouldn't have been
previously, but this is not a functional change because the callback
is identical to the normal buffer write iodone callback when inodes
are not attached.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode log item is kind of special in that it can be aggregating
new changes in memory at the same time time existing changes are
being written back to disk. This means there are fields in the log
item that are accessed concurrently from contexts that don't share
any locking at all.
e.g. updating ili_last_fields occurs at flush time under the
ILOCK_EXCL and flush lock at flush time, under the flush lock at IO
completion time, and is read under the ILOCK_EXCL when the inode is
logged. Hence there is no actual serialisation between reading the
field during logging of the inode in transactions vs clearing the
field in IO completion.
We currently get away with this by the fact that we are only
clearing fields in IO completion, and nothing bad happens if we
accidentally log more of the inode than we actually modify. Worst
case is we consume a tiny bit more memory and log bandwidth.
However, if we want to do more complex state manipulations on the
log item that requires updates at all three of these potential
locations, we need to have some mechanism of serialising those
operations. To do this, introduce a spinlock into the log item to
serialise internal state.
This could be done via the xfs_inode i_flags_lock, but this then
leads to potential lock inversion issues where inode flag updates
need to occur inside locks that best nest inside the inode log item
locks (e.g. marking inodes stale during inode cluster freeing).
Using a separate spinlock avoids these sorts of problems and
simplifies future code.
This does not touch the use of ili_fields in the item formatting
code - that is entirely protected by the ILOCK_EXCL at this point in
time, so it remains untouched.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This was used to track if the item had logged fields being flushed
to disk. We log everything in the inode these days, so this logic is
no longer needed. Remove it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In tracking down a problem in this patchset, I discovered we are
reclaiming dirty stale inodes. This wasn't discovered until inodes
were always attached to the cluster buffer and then the rcu callback
that freed inodes was assert failing because the inode still had an
active pointer to the cluster buffer after it had been reclaimed.
Debugging the issue indicated that this was a pre-existing issue
resulting from the way the inodes are handled in xfs_inactive_ifree.
When we free a cluster buffer from xfs_ifree_cluster, all the inodes
in cache are marked XFS_ISTALE. Those that are clean have nothing
else done to them and so eventually get cleaned up by background
reclaim. i.e. it is assumed we'll never dirty/relog an inode marked
XFS_ISTALE.
On journal commit dirty stale inodes as are handled by both
buffer and inode log items to run though xfs_istale_done() and
removed from the AIL (buffer log item commit) or the log item will
simply unpin it because the buffer log item will clean it. What happens
to any specific inode is entirely dependent on which log item wins
the commit race, but the result is the same - stale inodes are
clean, not attached to the cluster buffer, and not in the AIL. Hence
inode reclaim can just free these inodes without further care.
However, if the stale inode is relogged, it gets dirtied again and
relogged into the CIL. Most of the time this isn't an issue, because
relogging simply changes the inode's location in the current
checkpoint. Problems arise, however, when the CIL checkpoints
between two transactions in the xfs_inactive_ifree() deferops
processing. This results in the XFS_ISTALE inode being redirtied
and inserted into the CIL without any of the other stale cluster
buffer infrastructure being in place.
Hence on journal commit, it simply gets unpinned, so it remains
dirty in memory. Everything in inode writeback avoids XFS_ISTALE
inodes so it can't be written back, and it is not tracked in the AIL
so there's not even a trigger to attempt to clean the inode. Hence
the inode just sits dirty in memory until inode reclaim comes along,
sees that it is XFS_ISTALE, and goes to reclaim it. This reclaiming
of a dirty inode caused use after free, list corruptions and other
nasty issues later in this patchset.
Hence this patch addresses a violation of the "never log XFS_ISTALE
inodes" caused by the deferops processing rolling a transaction
and relogging a stale inode in xfs_inactive_free. It also adds a
bunch of asserts to catch this problem in debug kernels so that
we don't reintroduce this problem in future.
Reproducer for this issue was generic/558 on a v4 filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove current_pid(), current_test_flags() and
current_clear_flags_nested(), because they are useless.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The page faultround path ->map_pages is implemented in XFS via
filemap_map_pages(). This function checks that pages found in page
cache lookups have not raced with truncate based invalidation by
checking page->mapping is correct and page->index is within EOF.
However, we've known for a long time that this is not sufficient to
protect against races with invalidations done by operations that do
not change EOF. e.g. hole punching and other fallocate() based
direct extent manipulations. The way we protect against these
races is we wrap the page fault operations in a XFS_MMAPLOCK_SHARED
lock so they serialise against fallocate and truncate before calling
into the filemap function that processes the fault.
Do the same for XFS's ->map_pages implementation to close this
potential data corruption issue.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the double-inode locking helpers to xfs_inode.c since they're not
specific to reflink.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor the two functions that we use to lock and unlock two inodes to
block userspace from initiating IO against a file, whether via system
calls or mmap activity.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Fix the return value of xfs_reflink_remap_prep so that its return value
conventions match the rest of xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
If the source and destination map are identical, we can skip the remap
step to save some time.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When logging quota block count updates during a reflink operation, we
only log the /delta/ of the block count changes to the dquot. Since we
now know ahead of time the extent type of both dmap and smap (and that
they have the same length), we know that we only need to reserve quota
blocks for dmap's blockcount if we're mapping it into a hole.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we've reworked xfs_reflink_remap_extent to remap only one
extent per transaction, we actually know if the extent being removed is
an allocated mapping. This means that we now know ahead of time if
we're going to be touching the data fork.
Since we only need blocks for a bmbt split if we're going to update the
data fork, we only need to get quota reservation if we know we're going
to touch the data fork.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The existing reflink remapping loop has some structural problems that
need addressing:
The biggest problem is that we create one transaction for each extent in
the source file without accounting for the number of mappings there are
for the same range in the destination file. In other words, we don't
know the number of remap operations that will be necessary and we
therefore cannot guess the block reservation required. On highly
fragmented filesystems (e.g. ones with active dedupe) we guess wrong,
run out of block reservation, and fail.
The second problem is that we don't actually use the bmap intents to
their full potential -- instead of calling bunmapi directly and having
to deal with its backwards operation, we could call the deferred ops
xfs_bmap_unmap_extent and xfs_refcount_decrease_extent instead. This
makes the frontend loop much simpler.
Solve all of these problems by refactoring the remapping loops so that
we only perform one remapping operation per transaction, and each
operation only tries to remap a single extent from source to dest.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reported-by: Edwin Török <edwin@etorok.net>
Tested-by: Edwin Török <edwin@etorok.net>
The name of this predicate is a little misleading -- it decides if the
extent mapping is allocated and written. Change the name to be more
direct, as we're going to add a new predicate in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Quota reservations are supposed to account for the blocks that might be
allocated due to a bmap btree split. Reflink doesn't do this, so fix
this to make the quota accounting more accurate before we start
rearranging things.
Fixes: 862bb360ef ("xfs: reflink extents from one file to another")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The data fork scrubber calls filemap_write_and_wait to flush dirty pages
and delalloc reservations out to disk prior to checking the data fork's
extent mappings. Unfortunately, this means that scrub can consume the
EIO/ENOSPC errors that would otherwise have stayed around in the address
space until (we hope) the writer application calls fsync to persist data
and collect errors. The end result is that programs that wrote to a
file might never see the error code and proceed as if nothing were
wrong.
xfs_scrub is not in a position to notify file writers about the
writeback failure, and it's only here to check metadata, not file
contents. Therefore, if writeback fails, we should stuff the error code
back into the address space so that an fsync by the writer application
can pick that up.
Fixes: 99d9d8d05d ("xfs: scrub inode block mappings")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The rmapbt extent swap algorithm remaps individual extents between
the source inode and the target to trigger reverse mapping metadata
updates. If either inode straddles a format or other bmap allocation
boundary, the individual unmap and map cycles can trigger repeated
bmap block allocations and frees as the extent count bounces back
and forth across the boundary. While net block usage is bound across
the swap operation, this behavior can prematurely exhaust the
transaction block reservation because it continuously drains as the
transaction rolls. Each allocation accounts against the reservation
and each free returns to global free space on transaction roll.
The previous workaround to this problem attempted to detect this
boundary condition and provide surplus block reservation to
acommodate it. This is insufficient because more remaps can occur
than implied by the extent counts; if start offset boundaries are
not aligned between the two inodes, for example.
To address this problem more generically and dynamically, add a
transaction accounting mode that returns freed blocks to the
transaction reservation instead of the superblock counters on
transaction roll and use it when the rmapbt based algorithm is
active. This allows the chain of remap transactions to preserve the
block reservation based own its own frees and prevent premature
exhaustion regardless of the remap pattern. Note that this is only
safe for superblocks with lazy sb accounting, but the latter is
required for v5 supers and the rmap feature depends on v5.
Fixes: b3fed43482 ("xfs: account format bouncing into rmapbt swapext tx reservation")
Root-caused-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just use bd_disk->queue instead.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
xlog_wait() on the CIL context can reference a freed context if the
waiter doesn't get scheduled before the CIL context is freed. This
can happen when a task is on the hard throttle and the CIL push
aborts due to a shutdown. This was detected by generic/019:
thread 1 thread 2
__xfs_trans_commit
xfs_log_commit_cil
<CIL size over hard throttle limit>
xlog_wait
schedule
xlog_cil_push_work
wake_up_all
<shutdown aborts commit>
xlog_cil_committed
kmem_free
remove_wait_queue
spin_lock_irqsave --> UAF
Fix it by moving the wait queue to the CIL rather than keeping it in
in the CIL context that gets freed on push completion. Because the
wait queue is now independent of the CIL context and we might have
multiple contexts in flight at once, only wake the waiters on the
push throttle when the context we are pushing is over the hard
throttle size threshold.
Fixes: 0e7ab7efe7 ("xfs: Throttle commits on delayed background CIL push")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The only use of I_DIRTY_TIME_EXPIRE is to detect in
__writeback_single_inode() that inode got there because flush worker
decided it's time to writeback the dirty inode time stamps (either
because we are syncing or because of age). However we can detect this
directly in __writeback_single_inode() and there's no need for the
strange propagation with I_DIRTY_TIME_EXPIRE flag.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
- Fix a resource leak on an error bailout.
-----BEGIN PGP SIGNATURE-----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=C0rZ
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"We've settled down into the bugfix phase; this one fixes a resource
leak on an error bailout path"
* tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add the missed xfs_perag_put() for xfs_ifree_cluster()
- Teach XFS to ask the VFS to drop an inode if the administrator changes
the FS_XFLAG_DAX inode flag such that the S_DAX state would change.
This can result in files changing access modes without requiring an
unmount cycle.
-----BEGIN PGP SIGNATURE-----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=mKZf
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull DAX updates part three from Darrick Wong:
"Now that the xfs changes have landed, this third piece changes the
FS_XFLAG_DAX ioctl code in xfs to request that the inode be reloaded
after the last program closes the file, if doing so would make a S_DAX
change happen. The goal here is to make dax access mode switching
quicker when possible.
Summary:
- Teach XFS to ask the VFS to drop an inode if the administrator
changes the FS_XFLAG_DAX inode flag such that the S_DAX state would
change. This can result in files changing access modes without
requiring an unmount cycle"
* tag 'vfs-5.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs/xfs: Update xfs_ioctl_setattr_dax_invalidate()
fs/xfs: Combine xfs_diflags_to_linux() and xfs_diflags_to_iflags()
fs/xfs: Create function xfs_inode_should_enable_dax()
fs/xfs: Make DAX mount option a tri-state
fs/xfs: Change XFS_MOUNT_DAX to XFS_MOUNT_DAX_ALWAYS
fs/xfs: Remove unnecessary initialization of i_rwsem
xfs_ifree_cluster() calls xfs_perag_get() at the beginning, but forgets to
call xfs_perag_put() in one failed path.
Add the missed function call to fix it.
Fixes: ce92464c18 ("xfs: make xfs_trans_get_buf return an error code")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
* Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
* Clean up fiemap handling in ext4
* Clean up and refactor multiple block allocator (mballoc) code
* Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
* Fixed a race in ext4_sync_parent() versus rename()
* Simplify the error handling in the extent manipulation code
* Make sure all metadata I/O errors are felected to ext4_ext_dirty()'s and
ext4_make_inode_dirty()'s callers.
* Avoid passing an error pointer to brelse in ext4_xattr_set()
* Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
* Fix refcount handling if ext4_iget() fails
* Fix a crash in generic/019 caused by a corrupted extent node
-----BEGIN PGP SIGNATURE-----
iQEyBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl7Ze8kACgkQ8vlZVpUN
gaNChAf4xn0ytFSrweI/S2Sp05G/2L/ocZ2TZZk2ZdGeN1E+ABdSIv/zIF9zuFgZ
/pY/C+fyEZWt4E3FlNO8gJzoEedkzMCMnUhSIfI+wZbcclyTOSNMJtnrnJKAEtVH
HOvGZJmg357jy407RCGhZpJ773nwU2xhBTr5OFxvSf9mt/vzebxIOnw5D7HPlC1V
Fgm6Du8q+tRrPsyjv1Yu4pUEVXMJ7qUcvt326AXVM3kCZO1Aa5GrURX0w3J4mzW1
tc1tKmtbLcVVYTo9CwHXhk/edbxrhAydSP2iACand3tK6IJuI6j9x+bBJnxXitnr
vsxsfTYMG18+2SxrJ9LwmagqmrRq
=HMTs
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of bug fixes and cleanups for ext4, including:
- Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
- Clean up fiemap handling in ext4
- Clean up and refactor multiple block allocator (mballoc) code
- Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
- Fixed a race in ext4_sync_parent() versus rename()
- Simplify the error handling in the extent manipulation code
- Make sure all metadata I/O errors are felected to
ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers.
- Avoid passing an error pointer to brelse in ext4_xattr_set()
- Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
- Fix refcount handling if ext4_iget() fails
- Fix a crash in generic/019 caused by a corrupted extent node"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: avoid unnecessary transaction starts during writeback
ext4: don't block for O_DIRECT if IOCB_NOWAIT is set
ext4: remove the access_ok() check in ext4_ioctl_get_es_cache
fs: remove the access_ok() check in ioctl_fiemap
fs: handle FIEMAP_FLAG_SYNC in fiemap_prep
fs: move fiemap range validation into the file systems instances
iomap: fix the iomap_fiemap prototype
fs: move the fiemap definitions out of fs.h
fs: mark __generic_block_fiemap static
ext4: remove the call to fiemap_check_flags in ext4_fiemap
ext4: split _ext4_fiemap
ext4: fix fiemap size checks for bitmap files
ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
add comment for ext4_dir_entry_2 file_type member
jbd2: avoid leaking transaction credits when unreserving handle
ext4: drop ext4_journal_free_reserved()
ext4: mballoc: use lock for checking free blocks while retrying
ext4: mballoc: refactor ext4_mb_good_group()
ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling
ext4: mballoc: refactor ext4_mb_discard_preallocations()
...
No need to pull the fiemap definitions into almost every file in the
kernel build.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
- Introduce DONTCACHE flags for dentries and inodes. This hint will
cause the VFS to drop the associated objects immediately after the
last put, so that we can change the file access mode (DAX or page
cache) on the fly.
-----BEGIN PGP SIGNATURE-----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=ebl3
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.8-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull DAX updates part two from Darrick Wong:
"This time around, we're hoisting the DONTCACHE flag from XFS into the
VFS so that we can make the incore DAX mode changes become effective
sooner.
We can't change the file data access mode on a live inode because we
don't have a safe way to change the file ops pointers. The incore
state change becomes effective at inode loading time, which can happen
if the inode is evicted. Therefore, we're making it so that
filesystems can ask the VFS to evict the inode as soon as the last
holder drops.
The per-fs changes to make this call this will be in subsequent pull
requests from Ted and myself.
Summary:
- Introduce DONTCACHE flags for dentries and inodes. This hint will
cause the VFS to drop the associated objects immediately after the
last put, so that we can change the file access mode (DAX or page
cache) on the fly"
* tag 'vfs-5.8-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs: Introduce DCACHE_DONTCACHE
fs: Lift XFS_IDONTCACHE to the VFS layer
- Various cleanups to remove dead code, unnecessary conditionals,
asserts, etc.
- Fix a linker warning caused by xfs stuffing '-g' into CFLAGS
redundantly.
- Tighten up our dmesg logging to ensure that everything is prefixed
with 'XFS' for easier grepping.
- Kill a bunch of typedefs.
- Refactor the deferred ops code to reduce indirect function calls.
- Increase type-safety with the deferred ops code.
- Make the DAX mount options a tri-state.
- Fix some error handling problems in the inode flush code and clean up
other inode flush warts.
- Refactor log recovery so that each log item recovery functions now live
with the other log item processing code.
- Fix some SPDX forms.
- Fix quota counter corruption if the fs crashes after running
quotacheck but before any dquots get logged.
- Don't fail metadata verification on zero-entry attr leaf blocks, since
they're just part of the disk format now due to a historic lack of log
atomicity.
- Don't allow SWAPEXT between files with different [ugp]id when quotas
are enabled.
- Refactor inode fork reading and verification to run directly from the
inode-from-disk function. This means that we now actually guarantee
that _iget'ted inodes are totally verified and ready to go.
- Move the incore inode fork format and extent counts to the ifork
structure.
- Scalability improvements by reducing cacheline pingponging in
struct xfs_mount.
- More scalability improvements by removing m_active_trans from the
hot path.
- Fix inode counter update sanity checking to run /only/ on debug
kernels.
- Fix longstanding inconsistency in what error code we return when a
program hits project quota limits (ENOSPC).
- Fix group quota returning the wrong error code when a program hits
group quota limits.
- Fix per-type quota limits and grace periods for group and project
quotas so that they actually work.
- Allow extension of individual grace periods.
- Refactor the non-reclaim inode radix tree walking code to remove a
bunch of stupid little functions and straighten out the
inconsistent naming schemes.
- Fix a bug in speculative preallocation where we measured a new
allocation based on the last extent mapping in the file instead of
looking farther for the last contiguous space allocation.
- Force delalloc writes to unwritten extents. This closes a
stale disk contents exposure vector if the system goes down before
the write completes.
- More lockdep whackamole.
-----BEGIN PGP SIGNATURE-----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=/NYc
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.8-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"Most of the changes this cycle are refactoring of existing code in
preparation for things landing in the future.
We also fixed various problems and deficiencies in the quota
implementation, and (I hope) the last of the stale read vectors by
forcing write allocations to go through the unwritten state until the
write completes.
Summary:
- Various cleanups to remove dead code, unnecessary conditionals,
asserts, etc.
- Fix a linker warning caused by xfs stuffing '-g' into CFLAGS
redundantly.
- Tighten up our dmesg logging to ensure that everything is prefixed
with 'XFS' for easier grepping.
- Kill a bunch of typedefs.
- Refactor the deferred ops code to reduce indirect function calls.
- Increase type-safety with the deferred ops code.
- Make the DAX mount options a tri-state.
- Fix some error handling problems in the inode flush code and clean
up other inode flush warts.
- Refactor log recovery so that each log item recovery functions now
live with the other log item processing code.
- Fix some SPDX forms.
- Fix quota counter corruption if the fs crashes after running
quotacheck but before any dquots get logged.
- Don't fail metadata verification on zero-entry attr leaf blocks,
since they're just part of the disk format now due to a historic
lack of log atomicity.
- Don't allow SWAPEXT between files with different [ugp]id when
quotas are enabled.
- Refactor inode fork reading and verification to run directly from
the inode-from-disk function. This means that we now actually
guarantee that _iget'ted inodes are totally verified and ready to
go.
- Move the incore inode fork format and extent counts to the ifork
structure.
- Scalability improvements by reducing cacheline pingponging in
struct xfs_mount.
- More scalability improvements by removing m_active_trans from the
hot path.
- Fix inode counter update sanity checking to run /only/ on debug
kernels.
- Fix longstanding inconsistency in what error code we return when a
program hits project quota limits (ENOSPC).
- Fix group quota returning the wrong error code when a program hits
group quota limits.
- Fix per-type quota limits and grace periods for group and project
quotas so that they actually work.
- Allow extension of individual grace periods.
- Refactor the non-reclaim inode radix tree walking code to remove a
bunch of stupid little functions and straighten out the
inconsistent naming schemes.
- Fix a bug in speculative preallocation where we measured a new
allocation based on the last extent mapping in the file instead of
looking farther for the last contiguous space allocation.
- Force delalloc writes to unwritten extents. This closes a stale
disk contents exposure vector if the system goes down before the
write completes.
- More lockdep whackamole"
* tag 'xfs-5.8-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (129 commits)
xfs: more lockdep whackamole with kmem_alloc*
xfs: force writes to delalloc regions to unwritten
xfs: refactor xfs_iomap_prealloc_size
xfs: measure all contiguous previous extents for prealloc size
xfs: don't fail unwritten extent conversion on writeback due to edquot
xfs: rearrange xfs_inode_walk_ag parameters
xfs: straighten out all the naming around incore inode tree walks
xfs: move xfs_inode_ag_iterator to be closer to the perag walking code
xfs: use bool for done in xfs_inode_ag_walk
xfs: fix inode ag walk predicate function return values
xfs: refactor eofb matching into a single helper
xfs: remove __xfs_icache_free_eofblocks
xfs: remove flags argument from xfs_inode_ag_walk
xfs: remove xfs_inode_ag_iterator_flags
xfs: remove unused xfs_inode_ag_iterator function
xfs: replace open-coded XFS_ICI_NO_TAG
xfs: move eofblocks conversion function to xfs_ioctl.c
xfs: allow individual quota grace period extension
xfs: per-type quota timers and warn limits
xfs: switch xfs_get_defquota to take explicit type
...
-----BEGIN PGP SIGNATURE-----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=HYf4
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Core block changes that have been queued up for this release:
- Remove dead blk-throttle and blk-wbt code (Guoqing)
- Include pid in blktrace note traces (Jan)
- Don't spew I/O errors on wouldblock termination (me)
- Zone append addition (Johannes, Keith, Damien)
- IO accounting improvements (Konstantin, Christoph)
- blk-mq hardware map update improvements (Ming)
- Scheduler dispatch improvement (Salman)
- Inline block encryption support (Satya)
- Request map fixes and improvements (Weiping)
- blk-iocost tweaks (Tejun)
- Fix for timeout failing with error injection (Keith)
- Queue re-run fixes (Douglas)
- CPU hotplug improvements (Christoph)
- Queue entry/exit improvements (Christoph)
- Move DMA drain handling to the few drivers that use it (Christoph)
- Partition handling cleanups (Christoph)"
* tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits)
block: mark bio_wouldblock_error() bio with BIO_QUIET
blk-wbt: rename __wbt_update_limits to wbt_update_limits
blk-wbt: remove wbt_update_limits
blk-throttle: remove tg_drain_bios
blk-throttle: remove blk_throtl_drain
null_blk: force complete for timeout request
blk-mq: drain I/O when all CPUs in a hctx are offline
blk-mq: add blk_mq_all_tag_iter
blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx
blk-mq: use BLK_MQ_NO_TAG in more places
blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG
blk-mq: move more request initialization to blk_mq_rq_ctx_init
blk-mq: simplify the blk_mq_get_request calling convention
blk-mq: remove the bio argument to ->prepare_request
nvme: force complete cancelled requests
blk-mq: blk-mq: provide forced completion method
block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds
block: blk-crypto-fallback: remove redundant initialization of variable err
block: reduce part_stat_lock() scope
block: use __this_cpu_add() instead of access by smp_processor_id()
...
This is always PAGE_KERNEL - for long term mappings with other properties
vmap should be used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-19-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the new readahead operation in iomap. Convert XFS and ZoneFS to use
it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-26-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because of the separation of FS_XFLAG_DAX from S_DAX and the delayed
setting of S_DAX, data invalidation no longer needs to happen when
FS_XFLAG_DAX is changed.
Change xfs_ioctl_setattr_dax_invalidate() to be
xfs_ioctl_dax_check_set_cache() and alter the code to reflect the new
functionality.
Furthermore, we no longer need the locking so we remove the join_flags
logic.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The functionality in xfs_diflags_to_linux() and xfs_diflags_to_iflags() are
nearly identical. The only difference is that *_to_linux() is called after
inode setup and disallows changing the DAX flag.
Combining them can be done with a flag which indicates if this is the initial
setup to allow the DAX flag to be properly set only at init time.
So remove xfs_diflags_to_linux() and call the modified xfs_diflags_to_iflags()
directly.
While we are here simplify xfs_diflags_to_iflags() to take struct xfs_inode and
use xfs_ip2xflags() to ensure future diflags are included correctly.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_inode_supports_dax() should reflect if the inode can support DAX not
that it is enabled for DAX.
Change the use of xfs_inode_supports_dax() to reflect only if the inode
and underlying storage support dax.
Add a new function xfs_inode_should_enable_dax() which reflects if the
inode should be enabled for DAX.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
As agreed upon[1]. We make the dax mount option a tri-state. '-o dax'
continues to operate the same. We add 'always', 'never', and 'inode'
(default).
[1] https://lore.kernel.org/lkml/20200405061945.GA94792@iweiny-DESK2.sc.intel.com/
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In prep for the new tri-state mount option which then introduces
XFS_MOUNT_DAX_NEVER.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
An earlier call of xfs_reinit_inode() from xfs_iget_cache_hit() already
handles initialization of i_rwsem.
Doing so again is unneeded.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When writing to a delalloc region in the data fork, commit the new
allocations (of the da reservation) as unwritten so that the mappings
are only marked written once writeback completes successfully. This
fixes the problem of stale data exposure if the system goes down during
targeted writeback of a specific region of a file, as tested by
generic/042.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor xfs_iomap_prealloc_size to be the function that dynamically
computes the per-file preallocation size by moving the allocsize= case
to the caller. Break up the huge comment preceding the function to
annotate the relevant parts of the code, and remove the impossible
check_writeio case.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we're estimating a new speculative preallocation length for an
extending write, we should walk backwards through the extent list to
determine the number of number of blocks that are physically and
logically contiguous with the write offset, and use that as an input to
the preallocation size computation.
This way, preallocation length is truly measured by the effectiveness of
the allocator in giving us contiguous allocations without being
influenced by the state of a given extent. This fixes both the problem
where ZERO_RANGE within an EOF can reduce preallocation, and prevents
the unnecessary shrinkage of preallocation when delalloc extents are
turned into unwritten extents.
This was found as a regression in xfs/014 after changing delalloc writes
to create unwritten extents during writeback.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
During writeback, it's possible for the quota block reservation in
xfs_iomap_write_unwritten to fail with EDQUOT because we hit the quota
limit. This causes writeback errors for data that was already written
to disk, when it's not even guaranteed that the bmbt will expand to
exceed the quota limit. Irritatingly, this condition is reported to
userspace as EIO by fsync, which is confusing.
We wrote the data, so allow the reservation. That might put us slightly
above the hard limit, but it's better than losing data after a write.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The perag structure already has a pointer to the xfs_mount, so we don't
need to pass that separately and can drop it. Having done that, move
iter_flags so that the argument order is the same between xfs_inode_walk
and xfs_inode_walk_ag. The latter will make things less confusing for a
future patch that enables background scanning work to be done in
parallel.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
We're not very consistent about function names for the incore inode
iteration function. Turn them all into xfs_inode_walk* variants.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the xfs_inode_ag_iterator function to be nearer xfs_inode_ag_walk
so that we don't have to scroll back and forth to figure out how the
incore inode walking function works. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This is a boolean variable, so use the bool type.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There are a number of predicate functions that help the incore inode
walking code decide if we really want to apply the iteration function to
the inode. These are boolean decisions, so change the return types to
boolean to match.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor the two eofb-matching logics into a single helper so that we
don't repeat ourselves.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is now a pointless wrapper, so kill it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The incore inode walk code passes a flags argument and a pointer from
the xfs_inode_ag_iterator caller all the way to the iteration function.
We can reduce the function complexity by passing flags through the
private pointer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Combine xfs_inode_ag_iterator_flags and xfs_inode_ag_iterator_tag into a
single wrapper function since there's only one caller of the _flags
variant.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Not used by anyone, so get rid of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Use XFS_ICI_NO_TAG instead of -1 when appropriate.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Move xfs_fs_eofblocks_from_user into the only file that actually uses
it, so that we don't have this function cluttering up the header file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The only grace period which can be set in the kernel today is for id 0,
i.e. the default grace period for all users. However, setting an
individual grace period is useful; for example:
Alice has a soft quota of 100 inodes, and a hard quota of 200 inodes
Alice uses 150 inodes, and enters a short grace period
Alice really needs to use those 150 inodes past the grace period
The administrator extends Alice's grace period until next Monday
vfs quota users such as ext4 can do this today, with setquota -T
To enable this for XFS, we simply move the timelimit assignment out
from under the (id == 0) test. Default setting remains under (id == 0).
Note that this now is consistent with how we set warnings.
(Userspace requires updates to enable this as well; xfs_quota needs to
parse new options, and setquota needs to set appropriate field flags.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move timers and warnings out of xfs_quotainfo and into xfs_def_quota
so that we can utilize them on a per-type basis, rather than enforcing
them based on the values found in the first enabled quota type.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[zlang: new way to get defquota in xfs_qm_init_timelimits]
[zlang: remove redundant defq assign]
Signed-off-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_get_defquota() currently takes an xfs_dquot, and from that obtains
the type of default quota we should get (user/group/project).
But early in init, we don't have access to a fully set up quota, so
that's not possible. The next patch needs go set up default quota
timers early, so switch xfs_get_defquota to take an explicit type
and add a helper function to obtain that type from an xfs_dquot
for the existing callers.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Pass xfs_dquot rather than xfs_disk_dquot to xfs_qm_adjust_dqtimers;
this makes it symmetric with xfs_qm_adjust_dqlimits and will help
the next patch.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is a fair bit of whitespace damage in the quota code, so
fix up enough of it that subsequent patches are restricted to
functional change to aid review.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS project quota treats project hierarchies as "mini filesysems" and
so rather than -EDQUOT, the intent is to return -ENOSPC when a quota
reservation fails, but this behavior is not consistent.
The only place we make a decision between -EDQUOT and -ENOSPC
returns based on quota type is in xfs_trans_dqresv().
This behavior is currently controlled by whether or not the
XFS_QMOPT_ENOSPC flag gets passed into the quota reservation. However,
its use is not consistent; paths such as xfs_create() and xfs_symlink()
don't set the flag, so a reservation failure will return -EDQUOT for
project quota reservation failures rather than -ENOSPC for these sorts
of operations, even for project quota:
# mkdir mnt/project
# xfs_quota -x -c "project -s -p mnt/project 42" mnt
# xfs_quota -x -c 'limit -p isoft=2 ihard=3 42' mnt
# touch mnt/project/file{1,2,3}
touch: cannot touch ‘mnt/project/file3’: Disk quota exceeded
We can make this consistent by not requiring the flag to be set at the
top of the callchain; instead we can simply test whether we are
reserving a project quota with XFS_QM_ISPDQ in xfs_trans_dqresv and if
so, return -ENOSPC for that failure. This removes the need for the
XFS_QMOPT_ENOSPC altogether and simplifies the code a fair bit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Long ago, group & project quota were mutually exclusive, and so
when we turned on XFS_QMOPT_ENOSPC ("return ENOSPC if project quota
is exceeded") when project quota was enabled, we only needed to
disable it again for user quota.
When group & project quota got separated, this got missed, and as a
result if project quota is enabled and group quota is exceeded, the
error code returned is incorrectly returned as ENOSPC not EDQUOT.
Fix this by stripping XFS_QMOPT_ENOSPC out of flags for group
quota when we try to reserve the space.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It's a global atomic counter, and we are hitting it at a rate of
half a million transactions a second, so it's bouncing the counter
cacheline all over the place on large machines. We don't actually
need it anymore - it used to be required because the VFS freeze code
could not track/prevent filesystem transactions that were running,
but that problem no longer exists.
Hence to remove the counter, we simply have to ensure that nothing
calls xfs_sync_sb() while we are trying to quiesce the filesytem.
That only happens if the log worker is still running when we call
xfs_quiesce_attr(). The log worker is cancelled at the end of
xfs_quiesce_attr() by calling xfs_log_quiesce(), so just call it
early here and then we can remove the counter altogether.
Concurrent create, 50 million inodes, identical 16p/16GB virtual
machines on different physical hosts. Machine A has twice the CPU
cores per socket of machine B:
unpatched patched
machine A: 3m16s 2m00s
machine B: 4m04s 4m05s
Create rates:
unpatched patched
machine A: 282k+/-31k 468k+/-21k
machine B: 231k+/-8k 233k+/-11k
Concurrent rm of same 50 million inodes:
unpatched patched
machine A: 6m42s 2m33s
machine B: 4m47s 4m47s
The transaction rate on the fast machine went from just under
300k/sec to 700k/sec, which indicates just how much of a bottleneck
this atomic counter was.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Seeing massive cpu usage from xfs_agino_range() on one machine;
instruction level profiles look similar to another machine running
the same workload, only one machine is consuming 10x as much CPU as
the other and going much slower. The only real difference between
the two machines is core count per socket. Both are running
identical 16p/16GB virtual machine configurations
Machine A:
25.83% [k] xfs_agino_range
12.68% [k] __xfs_dir3_data_check
6.95% [k] xfs_verify_ino
6.78% [k] xfs_dir2_data_entry_tag_p
3.56% [k] xfs_buf_find
2.31% [k] xfs_verify_dir_ino
2.02% [k] xfs_dabuf_map.constprop.0
1.65% [k] xfs_ag_block_count
And takes around 13 minutes to remove 50 million inodes.
Machine B:
13.90% [k] __pv_queued_spin_lock_slowpath
3.76% [k] do_raw_spin_lock
2.83% [k] xfs_dir3_leaf_check_int
2.75% [k] xfs_agino_range
2.51% [k] __raw_callee_save___pv_queued_spin_unlock
2.18% [k] __xfs_dir3_data_check
2.02% [k] xfs_log_commit_cil
And takes around 5m30s to remove 50 million inodes.
Suspect is cacheline contention on m_sectbb_log which is used in one
of the macros in xfs_agino_range. This is a read-only variable but
shares a cacheline with m_active_trans which is a global atomic that
gets bounced all around the machine.
The workload is trying to run hundreds of thousands of transactions
per second and hence cacheline contention will be occurring on this
atomic counter. Hence xfs_agino_range() is likely just be an
innocent bystander as the cache coherency protocol fights over the
cacheline between CPU cores and sockets.
On machine A, this rearrangement of the struct xfs_mount
results in the profile changing to:
9.77% [kernel] [k] xfs_agino_range
6.27% [kernel] [k] __xfs_dir3_data_check
5.31% [kernel] [k] __pv_queued_spin_lock_slowpath
4.54% [kernel] [k] xfs_buf_find
3.79% [kernel] [k] do_raw_spin_lock
3.39% [kernel] [k] xfs_verify_ino
2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock
Vastly less CPU usage in xfs_agino_range(), but still 3x the amount
of machine B and still runs substantially slower than it should.
Current rm -rf of 50 million files:
vanilla patched
machine A 13m20s 6m42s
machine B 5m30s 5m02s
It's an improvement, hence indicating that separation and further
optimisation of read-only global filesystem data is worthwhile, but
it clearly isn't the underlying issue causing this specific
performance degradation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Shaokun Zhang reported that XFS was using substantial CPU time in
percpu_count_sum() when running a single threaded benchmark on
a high CPU count (128p) machine from xfs_mod_ifree(). The issue
is that the filesystem is empty when the benchmark runs, so inode
allocation is running with a very low inode free count.
With the percpu counter batching, this means comparisons when the
counter is less that 128 * 256 = 32768 use the slow path of adding
up all the counters across the CPUs, and this is expensive on high
CPU count machines.
The summing in xfs_mod_ifree() is only used to fire an assert if an
underrun occurs. The error is ignored by the higher level code.
Hence this is really just debug code and we don't need to run it
on production kernels, nor do we need such debug checks to return
error values just to trigger an assert.
Finally, xfs_mod_icount/xfs_mod_ifree are only called from
xfs_trans_unreserve_and_mod_sb(), so get rid of them and just
directly call the percpu_counter_add/percpu_counter_compare
functions. The compare functions are now run only on debug builds as
they are internal to ASSERT() checks and so only compiled in when
ASSERTs are active (CONFIG_XFS_DEBUG=y or CONFIG_XFS_WARN=y).
Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs: gut error handling in xfs_trans_unreserve_and_mod_sb()
From: Dave Chinner <dchinner@redhat.com>
The error handling in xfs_trans_unreserve_and_mod_sb() is largely
incorrect - rolling back the changes in the transaction if only one
counter underruns makes all the other counters incorrect. We still
allow the change to proceed and committing the transaction, except
now we have multiple incorrect counters instead of a single
underflow.
Further, we don't actually report the error to the caller, so this
is completely silent except on debug kernels that will assert on
failure before we even get to the rollback code. Hence this error
handling is broken, untested, and largely unnecessary complexity.
Just remove it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The argument isn't used by any caller, and drivers don't fill out
bi_sector for flush requests either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move freeing the dynamically allocated attr and COW fork, as well
as zeroing the pointers where actually needed into the callers, and
just pass the xfs_ifork structure to xfs_idestroy_fork. Also simplify
the kmem_free calls by not checking for NULL first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both the data and attr fork have a format that is stored in the legacy
idinode. Move it into the xfs_ifork structure instead, where it uses
up padding.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are there are three extents counters per inode, one for each of
the forks. Two are in the legacy icdinode and one is directly in
struct xfs_inode. Switch to a single counter in the xfs_ifork structure
where it uses up padding at the end of the structure. This simplifies
various bits of code that just wants the number of extents counter and
can now directly dereference it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_ifree only need to free inline data in the data fork, as we've
already taken care of the attr fork before (and in fact freed the
fork structure). Just open code the freeing of the inline data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just checking di_forkoff directly is a little easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS_IFORK_Q is supposed to be a predicate, not a function returning a
value. Its usage is in xchk_bmap_check_rmaps is incorrect, but that
function only cares about whether or not the "size" of the data is zero
or not. Convert that logic to use a proper boolean, and teach the
caller to skip the call entirely if the end result would be that we'd do
nothing anyway. This avoids a crash later in this series.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[hch: generalized the NULL ifor check]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we fully verify the inode forks before they are added to the
inode cache, the crash reported in
https://bugzilla.kernel.org/show_bug.cgi?id=204031
can't happen anymore, as we'll never let an inode that has inconsistent
nextents counts vs the presence of an in-core attr fork leak into the
inactivate code path. So remove the work around to try to handle the
case, and just return an error and warn if the fork is not present.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We don't call xfs_bmapi_read for the COW fork anymore, so remove the
special casing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Call the data/attr local fork verifiers as soon as we are ready for them.
This keeps them close to the code setting up the forks, and avoids a
few branches later on. Also open code xfs_inode_verify_forks in the
only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The split between xfs_inode_verify_forks and the two helpers
implementing the actual functionality is a little strange. Reshuffle
it so that xfs_inode_verify_forks verifies if the data and attr forks
are actually in local format and only call the low-level helpers if
that is the case. Handle the actual error reporting in the low-level
handlers to streamline the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_ifork_ops add up to two indirect calls per inode read and flush,
despite just having a single instance in the kernel. In xfsprogs
phase6 in xfs_repair overrides the verify_dir method to deal with inodes
that do not have a valid parent, but that can be fixed pretty easily
by ensuring they always have a valid looking parent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is not much point in the xfs_iread function, as it has a single
caller and not a whole lot of code. Move it into the only caller,
and trim down the overdocumentation to just documenting the important
"why" instead of a lot of redundant "what".
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
i_delayed_blks is set to 0 in xfs_inode_alloc and can't have anything
assigned to it until the inode is visible to the VFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep the code dealing with the dinode together, and also ensure we verify
the dinode in the owner change log recovery case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Handle inodes with a 0 di_mode in xfs_inode_from_disk, instead of partially
duplicating inode reading in xfs_iread.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_iformat_fork is a weird catchall. Split it into one helper for
the data fork and one for the attr fork, and then call both helper
as well as the COW fork initialization from xfs_inode_from_disk. Order
the COW fork initialization after the attr fork initialization given
that it can't fail to simplify the error handling.
Note that the newly split helpers are moved down the file in
xfs_inode_fork.c to avoid the need for forward declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We always need to fill out the fork structures when reading the inode,
so call xfs_iformat_fork from the tail of xfs_inode_from_disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The last argument to xfs_bmapi_raad contains XFS_BMAPI_* flags, not the
fork. Given that XFS_DATA_FORK evaluates to 0 no real harm is done,
but let's fix this anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Fix this error message to complain about project and group quota flag
bits instead of "PUOTA" and "QUOTA".
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the old SWAPEXT ioctl doesn't know how to adjust quota ids,
bail out of the ids don't match and quotas are enabled.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While QAing the new xfs_repair quotacheck code, I uncovered a quota
corruption bug resulting from a bad interaction between dquot buffer
initialization and quotacheck. The bug can be reproduced with the
following sequence:
# mkfs.xfs -f /dev/sdf
# mount /dev/sdf /opt -o usrquota
# su nobody -s /bin/bash -c 'touch /opt/barf'
# sync
# xfs_quota -x -c 'report -ahi' /opt
User quota on /opt (/dev/sdf)
Inodes
User ID Used Soft Hard Warn/Grace
---------- ---------------------------------
root 3 0 0 00 [------]
nobody 1 0 0 00 [------]
# xfs_io -x -c 'shutdown' /opt
# umount /opt
# mount /dev/sdf /opt -o usrquota
# touch /opt/man2
# xfs_quota -x -c 'report -ahi' /opt
User quota on /opt (/dev/sdf)
Inodes
User ID Used Soft Hard Warn/Grace
---------- ---------------------------------
root 1 0 0 00 [------]
nobody 1 0 0 00 [------]
# umount /opt
Notice how the initial quotacheck set the root dquot icount to 3
(rootino, rbmino, rsumino), but after shutdown -> remount -> recovery,
xfs_quota reports that the root dquot has only 1 icount. We haven't
deleted anything from the filesystem, which means that quota is now
under-counting. This behavior is not limited to icount or the root
dquot, but this is the shortest reproducer.
I traced the cause of this discrepancy to the way that we handle ondisk
dquot updates during quotacheck vs. regular fs activity. Normally, when
we allocate a disk block for a dquot, we log the buffer as a regular
(dquot) buffer. Subsequent updates to the dquots backed by that block
are done via separate dquot log item updates, which means that they
depend on the logged buffer update being written to disk before the
dquot items. Because individual dquots have their own LSN fields, that
initial dquot buffer must always be recovered.
However, the story changes for quotacheck, which can cause dquot block
allocations but persists the final dquot counter values via a delwri
list. Because recovery doesn't gate dquot buffer replay on an LSN, this
means that the initial dquot buffer can be replayed over the (newer)
contents that were delwritten at the end of quotacheck. In effect, this
re-initializes the dquot counters after they've been updated. If the
log does not contain any other dquot items to recover, the obsolete
dquot contents will not be corrected by log recovery.
Because quotacheck uses a transaction to log the setting of the CHKD
flags in the superblock, we skip quotacheck during the second mount
call, which allows the incorrect icount to remain.
Fix this by changing the ondisk dquot initialization function to use
ordered buffers to write out fresh dquot blocks if it detects that we're
running quotacheck. If the system goes down before quotacheck can
complete, the CHKD flags will not be set in the superblock and the next
mount will run quotacheck again, which can fix uninitialized dquot
buffers. This requires amending the defer code to maintaine ordered
buffer state across defer rolls for the sake of the dquot allocation
code.
For regular operations we preserve the current behavior since the dquot
items require properly initialized ondisk dquot records.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The attr fork can transition from shortform to leaf format while
empty if the first xattr doesn't fit in shortform. While this empty
leaf block state is intended to be transient, it is technically not
due to the transactional implementation of the xattr set operation.
We historically have a couple of bandaids to work around this
problem. The first is to hold the buffer after the format conversion
to prevent premature writeback of the empty leaf buffer and the
second is to bypass the xattr count check in the verifier during
recovery. The latter assumes that the xattr set is also in the log
and will be recovered into the buffer soon after the empty leaf
buffer is reconstructed. This is not guaranteed, however.
If the filesystem crashes after the format conversion but before the
xattr set that induced it, only the format conversion may exist in
the log. When recovered, this creates a latent corrupted state on
the inode as any subsequent attempts to read the buffer fail due to
verifier failure. This includes further attempts to set xattrs on
the inode or attempts to destroy the attr fork, which prevents the
inode from ever being removed from the unlinked list.
To avoid this condition, accept that an empty attr leaf block is a
valid state and remove the count check from the verifier. This means
that on rare occasions an attr fork might exist in an unexpected
state, but is otherwise consistent and functional. Note that we
retain the logic to avoid racing with metadata writeback to reduce
the window where this can occur.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This patch corrects the SPDX License Identifier style in header files
related to XFS File System support. For C header files
Documentation/process/license-rules.rst mandates C-like comments.
(opposed to C source files where C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
DCACHE_DONTCACHE indicates a dentry should not be cached on final
dput().
Also add a helper function to mark DCACHE_DONTCACHE on all dentries
pointing to a specific inode when that inode is being set I_DONTCACHE.
This facilitates dropping dentry references to inodes sooner which
require eviction to swap S_DAX mode.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
DAX effective mode (S_DAX) changes requires inode eviction.
XFS has an advisory flag (XFS_IDONTCACHE) to prevent caching of the
inode if no other additional references are taken. We lift this flag to
the VFS layer and change the behavior slightly by allowing the flag to
remain even if multiple references are taken.
This will expedite the eviction of inodes to change S_DAX.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove duplicate headers which are included twice.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The random buffer write failure errortag patch introduced a local
mount pointer variable for the test macro, but the macro is compiled
out on !DEBUG kernels. This results in an unused variable warning.
Access the mount structure through the buffer pointer and remove the
local mount pointer to address the warning.
Fixes: 7376d74547 ("xfs: random buffer write failure errortag")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove unnecessary includes from the log recovery code.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Move the helpers that handle incore buffer cancellation records to
xfs_buf_item_recover.c since they're not directly related to the main
log recovery machinery. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The only purpose of XFS_LI_RECOVERED is to prevent log recovery from
trying to replay recovered intents more than once. Therefore, we can
move the bit setting up to the ->iop_recover caller.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've made the recovered item tests all the same, we can hoist
the test and the ail locking code to the ->iop_recover caller and call
the recovery function directly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename XFS_{EFI,BUI,RUI,CUI}_RECOVERED to XFS_LI_RECOVERED so that we
track recovery status in the log item, then get rid of the now unused
flags fields in each of those log item types.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
During recovery, every intent that we recover from the log has to be
added to the AIL. Replace the open-coded addition with a helper.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Replace the open-coded AIL item walking with a proper helper when we're
trying to release an intent item that has been finished. We add a new
->iop_match method to decide if an intent item matches a supplied ID.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've finished converting all types of log intent items to
provide an ->iop_recover function, we can convert the "is this an intent
item?" predicate to look for a non-null iop_recover pointer.
Move the predicate closer to the functions that use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Quotaoff doesn't actually do anything, so take advantage of the
commit_pass2 pointer being optional and get rid of the switch
statement clause.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the bmap update intent and intent-done pass2 commit code into the
per-item source code files and use dispatch functions to call them. We
do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the refcount update intent and intent-done pass2 commit code into
the per-item source code files and use dispatch functions to call them.
We do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the rmap update intent and intent-done pass2 commit code into the
per-item source code files and use dispatch functions to call them. We
do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the extent free intent and intent-done pass2 commit code into the
per-item source code files and use dispatch functions to call them. We
do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log icreate item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log dquot item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log inode item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log buffer item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the pass1 commit code into the per-item source code files and use
the dispatch function to call them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the pass2 readhead code into the per-item source code files and use
the dispatch function to call them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a generic dispatch structure to delegate recovery of different
log item types into various code modules. This will enable us to move
code specific to a particular log item type out of xfs_log_recover.c and
into the log item source.
The first operation we virtualize is the log item sorting.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove the old typedefs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
iget_flags is unused in xfs_imap_to_bp(). Remove the parameter and
fix up the callers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both types control shutdown messaging and neither is used in the
current codebase.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Introduce an error tag to randomly fail async buffer writes. This is
primarily to facilitate testing of the XFS error configuration
mechanism.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The stale parameter was used to control the now unused shutdown
parameter of xfs_trans_ail_remove().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that the functions and callers of
xfs_trans_ail_[remove|delete]() have been fixed up appropriately,
the only difference between the two is the shutdown behavior. There
are only a few callers of the _remove() variant, so make the
shutdown conditional on the parameter and combine the two functions.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The shutdown parameter of xfs_trans_ail_remove() is no longer used.
The remaining callers use it for items that legitimately might not
be in the AIL or from contexts where AIL state has already been
checked. Remove the unnecessary parameter and fix up the callers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Various intent log items call xfs_trans_ail_remove() with a log I/O
error shutdown type, but this helper historically checks whether an
item is in the AIL before calling xfs_trans_ail_delete(). This means
the shutdown check is essentially a no-op for users of
xfs_trans_ail_remove().
It is possible that some items might not be AIL resident when the
AIL remove attempt occurs, but this should be isolated to cases
where the filesystem has already shutdown. For example, this
includes abort of the transaction committing the intent and I/O
error of the iclog buffer committing the intent to the log.
Therefore, update these callsites to use xfs_trans_ail_delete() to
provide AIL state validation for the common path of items being
released and removed when associated done items commit to the
physical log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Several callers acquire the lock just prior to the call. Callers
that require ->ail_lock for other purposes already check IN_AIL
state and thus don't require the additional shutdown check in the
helper. Push the lock down into xfs_trans_ail_delete(), open code
the instances that still acquire it, and remove the unnecessary ailp
parameter.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The dquot flush handler effectively aborts the dquot flush if the
filesystem is already shut down, but doesn't actually shut down if
the flush fails. Update xfs_qm_dqflush() to consistently abort the
dquot flush and shutdown the fs if the flush fails with an
unexpected error.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The pre-flush dquot verification in xfs_qm_dqflush() duplicates the
read verifier by checking the dquot in the on-disk buffer. Instead,
verify the in-core variant before it is flushed to the buffer.
Fixes: 7224fa482a ("xfs: add full xfs_dqblk verifier")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
At unmount time, XFS emits an alert for every in-core buffer that
might have undergone a write error. In practice this behavior is
probably reasonable given that the filesystem is likely short lived
once I/O errors begin to occur consistently. Under certain test or
otherwise expected error conditions, this can spam the logs and slow
down the unmount.
Now that we have a ratelimit mechanism specifically for buffer
alerts, reuse it for the per-buffer alerts in xfs_wait_buftarg().
Also lift the final repair message out of the loop so it always
prints and assert that the metadata error handling code has shut
down the fs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS has some inconsistent log message rate limiting with respect to
buffer alerts. The metadata I/O error notification uses the generic
ratelimited alert, the buffer push code uses a custom rate limit and
the similar quiesce time failure checks are not rate limited at all
(when they should be).
The custom rate limit defined in the buf item code is specifically
crafted for buffer alerts. It is more aggressive than generic rate
limiting code because it must accommodate a high frequency of I/O
error events in a relative short timeframe.
Factor out the custom rate limit state from the buf item code into a
per-buftarg rate limit so various alerts are limited based on the
target. Define a buffer alert helper function and use it for the
buffer alerts that are already ratelimited.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The buffer write failure flag is intended to control the internal
write retry that XFS has historically implemented to help mitigate
the severity of transient I/O errors. The flag is set when a buffer
is resubmitted from the I/O completion path due to a previous
failure. It is checked on subsequent I/O completions to skip the
internal retry and fall through to the higher level configurable
error handling mechanism. The flag is cleared in the synchronous and
delwri submission paths and also checked in various places to log
write failure messages.
There are a couple minor problems with the current usage of this
flag. One is that we issue an internal retry after every submission
from xfsaild due to how delwri submission clears the flag. This
results in double the expected or configured number of write
attempts when under sustained failures. Another more subtle issue is
that the flag is never cleared on successful I/O completion. This
can cause xfs_wait_buftarg() to suggest that dirty buffers are being
thrown away due to the existence of the flag, when the reality is
that the flag might still be set because the write succeeded on the
retry.
Clear the write failure flag on successful I/O completion to address
both of these problems. This means that the internal retry attempt
occurs once since the last time a buffer write failed and that
various other contexts only see the flag set when the immediately
previous write attempt has failed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The shutdown check in xfs_iflush() duplicates checks down in the
buffer code. If the fs is shut down, xfs_trans_read_buf_map() always
returns an error and falls into the same error path. Remove the
unnecessary check along with the warning in xfs_imap_to_bp()
that generates excessive noise in the log if the fs is shut down.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode flush code has several layers of error handling between
the inode and cluster flushing code. If the inode flush fails before
acquiring the backing buffer, the inode flush is aborted. If the
cluster flush fails, the current inode flush is aborted and the
cluster buffer is failed to handle the initial inode and any others
that might have been attached before the error.
Since xfs_iflush() is the only caller of xfs_iflush_cluster(), the
error handling between the two can be condensed in the top-level
function. If we update xfs_iflush_int() to always fall through to
the log item update and attach the item completion handler to the
buffer, any errors that occur after the first call to
xfs_iflush_int() can be handled with a buffer I/O failure.
Lift the error handling from xfs_iflush_cluster() into xfs_iflush()
and consolidate with the existing error handling. This also replaces
the need to release the buffer because failing the buffer with
XBF_ASYNC drops the current reference.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We use the same buffer I/O failure code in a few different places.
It's not much code, but it's not necessarily self-explanatory.
Factor it into a helper and document it in one place.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Flush locked log items whose underlying buffers fail metadata
writeback are tagged with a special flag to indicate that the flush
lock is already held. This is currently implemented in the type
specific ->iop_push() callback, but the processing required for such
items is not type specific because we're only doing basic state
management on the underlying buffer.
Factor the failed log item handling out of the inode and dquot
->iop_push() callbacks and open code the buffer resubmit helper into
a single helper called from xfsaild_push_item(). This provides a
generic mechanism for handling failed metadata buffer writeback with
a bit less code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make sure we release resources properly if we cannot clean out the COW
extents in preparation for an extent swap.
Fixes: 96987eea53 ("xfs: cancel COW blocks before swapext")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The functionality in xfs_diflags_to_linux() and xfs_diflags_to_iflags() are
nearly identical. The only difference is that *_to_linux() is called after
inode setup and disallows changing the DAX flag.
Combining them can be done with a flag which indicates if this is the initial
setup to allow the DAX flag to be properly set only at init time.
So remove xfs_diflags_to_linux() and call the modified xfs_diflags_to_iflags()
directly.
While we are here simplify xfs_diflags_to_iflags() to take struct xfs_inode and
use xfs_ip2xflags() to ensure future diflags are included correctly.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_inode_supports_dax() should reflect if the inode can support DAX not
that it is enabled for DAX.
Change the use of xfs_inode_supports_dax() to reflect only if the inode
and underlying storage support dax.
Add a new function xfs_inode_should_enable_dax() which reflects if the
inode should be enabled for DAX.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
As agreed upon[1]. We make the dax mount option a tri-state. '-o dax'
continues to operate the same. We add 'always', 'never', and 'inode'
(default).
[1] https://lore.kernel.org/lkml/20200405061945.GA94792@iweiny-DESK2.sc.intel.com/
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In prep for the new tri-state mount option which then introduces
XFS_MOUNT_DAX_NEVER.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
An earlier call of xfs_reinit_inode() from xfs_iget_cache_hit() already
handles initialization of i_rwsem.
Doing so again is unneeded.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Given how XFS is all based around btrees it doesn't make much sense
to offer a totally generic state when we can just use the btree cursor.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All defer op instance place their own extension of the log item into
the dfp_done field. Replace that with a xfs_log_item to improve type
safety and make the code easier to follow.
Also use the opportunity to improve the ->finish_item calling conventions
to place the done log item as the higher level structure before the
list_entry used for the individual items.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split out a helper that operates on a single xfs_defer_pending structure
to untangle the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All defer op instance place their own extension of the log item into
the dfp_intent field. Replace that with a xfs_log_item to improve type
safety and make the code easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This avoids a per-item indirect call, and also simplifies the interface
a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
These are aways called together, and my merging them we reduce the amount
of indirect calls, improve type safety and in general clean up the code
a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a helper that encapsulates the whole logic to create a defer
intent. This reorders some of the work that was done, but none of
that has an affect on the operation as only fields that don't directly
interact are affected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split out a xlog_add_buffer_cancelled helper which does the low-level
manipulation of the buffer cancelation table, and in that helper call
xlog_find_buffer_cancelled instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Don't bother to allocate memory and convert the log item when we
only need the block number and the length. Just extract them directly
and call xlog_buf_readahead separately in each branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a little helper to readahead a buffer if it hasn't been cancelled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This list contains pretty much everything that is not a buffer. The
comment calls it item_list, which is a much better name than inode
list, so switch the actual variable name to that as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the somewhat convoluted use of xlog_peek_buffer_cancelled and
xlog_check_buffer_cancelled with two obvious helpers:
xlog_is_buffer_cancelled, which returns true if there is a buffer in
the cancellation table, and
xlog_put_buffer_cancelled, which also decrements the reference count
of the buffer cancellation table.
Both share a little helper to look up the entry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are a couple places where we directly call printk_once() and one
of them doesn't follow the standard xfs subsystem printk format as a
result.
#define printk_once variants to go with our existing printk_ratelimited
#defines so we can do one-shot printks in a consistent manner.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
I ran into a linker warning in XFS that originates from a mismatch
between libelf, binutils and objtool when certain files in the kernel
are built with "gcc -g":
x86_64-linux-ld: fs/xfs/xfs_trace.o: unable to initialize decompress status for section .debug_info
After some discussion, nobody could identify why xfs sets this flag
here. CONFIG_XFS_DEBUG used to enable lots of unrelated settings, but
now its main purpose is to enable extra consistency checks and assertions
that are unrelated to the debug info.
Remove the Makefile logic to set the flag here. If anyone relies
on the debug info, this can simply be enabled again with the global
CONFIG_DEBUG_INFO option.
Dave Chinner writes:
I'm pretty sure it was needed for the original kgdb integration back
in the early 2000s. That was when SGI used to patch their XFS dev
tree with kgdb and debug symbols were needed by the custom kgdb
modules that were ported across from the Irix kernel debugger.
ISTR that the early kcrash kernel dump analysis tools (again,
originated from the Irix "icrash" kernel dump tools) had custom XFS
debug scripts that needed also the debug info to work correctly...
Which is a long way of saying "we don't need it anymore" instead of
"nobody knows why it was set"... :)
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/lkml/20200409074130.GD21033@infradead.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the "no-allocation" reservations has been removed, the resblks
value should be larger than zero, so remove the unnecessary check.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Simplify the setting of the flags value, and only consider
quota enforcement stuff here.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The check XFS_IS_QUOTA_RUNNING() has been done when enter the
xfs_qm_vop_create_dqattach() function, it will return directly
if the result is false, so the followed XFS_IS_QUOTA_RUNNING()
assertion is unnecessary. If we truly care about this, the check
also can be added to the condition of next if statements.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The initial value of variable udqp is NULL, and we only set the
flag XFS_QMOPT_PQUOTA in xfs_qm_vop_dqalloc() function, so only
the pdqp value is initialized and the udqp value is still NULL.
Since the udqp value is NULL in the rest part of xfs_ioctl_setattr()
function, it is meaningless and do nothing. So remove it from
xfs_ioctl_setattr().
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We share an inode between gquota and pquota with the older
superblock that doesn't have separate pquotino, and for the
need_alloc == false case we don't need to call xfs_dir_ialloc()
function, so add the check if reserved free disk blocks is
needed.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The two if statements have same condition, and the mask value
does not change in xfs_setattr_nonsize(), so combine them.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The trace event xfs_dquot_dqalloc does not depend on the
value uq, so remove the condition, and trace quota allocations
for all quota types.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we're sorting recovered log items ahead of recovering them and
encounter a log item of unknown type, actually print the type code when
we're rejecting the whole transaction to aid in debugging.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pull in Christoph Hellwig's series that changes the sysctl's ->proc_handler
methods to take kernel pointers instead. It gets rid of the set_fs address
space overrides used by BPF. As per discussion, pull in the feature branch
into bpf-next as it relates to BPF sysctl progs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200427071508.GV23230@ZenIV.linux.org.uk/T/
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the inode dirty data flushing to a workqueue so that multiple
threads can take advantage of a single thread's flushing work. The
ratelimiting technique used in bdd4ee4 was not successful, because
threads that skipped the inode flush scan due to ratelimiting would
ENOSPC early, which caused occasional (but noticeable) changes in
behavior and sporadic fstest regressions.
Therefore, make all the writer threads wait on a single inode flush,
which eliminates both the stampeding hordes of flushers and the small
window in which a write could fail with ENOSPC because it lost the
ratelimit race after even another thread freed space.
Fixes: c6425702f2 ("xfs: ratelimit inode flush on buffered write ENOSPC")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In the reflink extent remap function, it turns out that uirec (the block
mapping corresponding only to the part of the passed-in mapping that got
unmapped) was not fully initialized. Specifically, br_state was not
being copied from the passed-in struct to the uirec. This could lead to
unpredictable results such as the reflinked mapping being marked
unwritten in the destination file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The filesystem freeze sequence in XFS waits on any background
eofblocks or cowblocks scans to complete before the filesystem is
quiesced. At this point, the freezer has already stopped the
transaction subsystem, however, which means a truncate or cowblock
cancellation in progress is likely blocked in transaction
allocation. This results in a deadlock between freeze and the
associated scanner.
Fix this problem by holding superblock write protection across calls
into the block reapers. Since protection for background scans is
acquired from the workqueue task context, trylock to avoid a similar
deadlock between freeze and blocking on the write lock.
Fixes: d6b636ebb1 ("xfs: halt auto-reclamation activities while rebuilding rmap")
Reported-by: Paul Furtado <paulfurtado91@gmail.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reflink should force the log out to disk if the filesystem was mounted
with wsync, the same as most other operations in xfs.
[Note: XFS_MOUNT_WSYNC is set when the admin mounts the filesystem
with either the 'wsync' or 'sync' mount options, which effectively means
that we're classifying reflink/dedupe as IO operations and making them
synchronous when required.]
Fixes: 3fc9f5e409 ("xfs: remove xfs_reflink_remap_range")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
[darrick: add more to the changelog]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a new helper to force the log up to the last LSN touching an
inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Qian Cai reports seemingly random buffer read verifier errors during
filesystem writeback. This was isolated to a recent patch that
factored out some inode cluster freeing code and happened to cast an
unsigned inode number type to a signed value. If the inode number
value overflows, we can skip marking in-core inodes associated with
the underlying buffer stale at the time the physical inodes are
freed. If such an inode happens to be dirty, xfsaild will eventually
attempt to write it back over non-inode blocks. The invalidation of
the underlying inode buffer causes writeback to read the buffer from
disk. This fails the read verifier (preventing eventual corruption)
if the buffer no longer looks like an inode cluster. Analysis by
Dave Chinner.
Fix up the helper to use the proper type for inode number values.
Fixes: 5806165a66 ("xfs: factor inode lookup from xfs_ifree_cluster")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The variables 'udqp' and 'gdqp' have been initialized, so remove
redundant variable assignment in xfs_symlink().
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A customer reported rcu stalls and softlockup warnings on a computer
with many CPU cores and many many more IO threads trying to write to a
filesystem that is totally out of space. Subsequent analysis pointed to
the many many IO threads calling xfs_flush_inodes -> sync_inodes_sb,
which causes a lot of wb_writeback_work to be queued. The writeback
worker spends so much time trying to wake the many many threads waiting
for writeback completion that it trips the softlockup detector, and (in
this case) the system automatically reboots.
In addition, they complain that the lengthy xfs_flush_inodes scan traps
all of those threads in uninterruptible sleep, which hampers their
ability to kill the program or do anything else to escape the situation.
If there's thousands of threads trying to write to files on a full
filesystem, each of those threads will start separate copies of the
inode flush scan. This is kind of pointless since we only need one
scan, so rate limit the inode flush.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If the inode buffer backing a particular inode is locked,
xfs_iflush() returns -EAGAIN and xfs_inode_item_push() skips the
inode. It still returns success to xfsaild, however, which bypasses
the xfsaild backoff heuristic. Update xfs_inode_item_push() to
return locked status if the inode buffer couldn't be locked.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A dquot flush currently blocks on the buffer lock for the underlying
dquot buffer. In turn, this causes xfsaild to block rather than
continue processing other items in the meantime. Update
xfs_qm_dqflush() to trylock the buffer, similar to how inode buffers
are handled, and return -EAGAIN if the lock fails. Fix up any
callers that don't currently handle the error properly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the "no-allocation" reservations for file creations has
been removed, the resblks value should be larger than zero, so
remove unnecessary ternary conditional.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: s/judgment/ternary/]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit f467cad95f, I added the ability to force a recalculation of
the filesystem summary counters if they seemed incorrect. This was done
(not entirely correctly) by tweaking the log code to write an unmount
record without the UMOUNT_TRANS flag set. At next mount, the log
recovery code will fail to find the unmount record and go into recovery,
which triggers the recalculation.
What actually gets written to the log is what ought to be an unmount
record, but without any flags set to indicate what kind of record it
actually is. This worked to trigger the recalculation, but we shouldn't
write bogus log records when we could simply write nothing.
Fixes: f467cad95f ("xfs: force summary counter recalc at next mount")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There's lots of indent in this code which makes it a bit hard to
follow. We are also going to completely rework the inode lookup code
as part of the inode reclaim rework, so factor out the inode lookup
code from the inode cluster freeing code.
Based on prototype code from Christoph Hellwig.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We currently wake anything waiting on the log tail to move whenever
the log item at the tail of the log is removed. Historically this
was fine behaviour because there were very few items at any given
LSN. But with delayed logging, there may be thousands of items at
any given LSN, and we can't move the tail until they are all gone.
Hence if we are removing them in near tail-first order, we might be
waking up processes waiting on the tail LSN to change (e.g. log
space waiters) repeatedly without them being able to make progress.
This also occurs with the new sync push waiters, and can result in
thousands of spurious wakeups every second when under heavy direct
reclaim pressure.
To fix this, check that the tail LSN has actually changed on the
AIL before triggering wakeups. This will reduce the number of
spurious wakeups when doing bulk AIL removal and make this code much
more efficient.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor the common AIL deletion code that does all the wakeups into a
helper so we only have one copy of this somewhat tricky code to
interface with all the wakeups necessary when the LSN of the log
tail changes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The XFS inode item slab actually reclaimed by inode shrinker
callbacks from the memory reclaim subsystem. These should be marked
as reclaimable so the mm subsystem has the full picture of how much
memory it can actually reclaim from the XFS slab caches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The buffer cache shrinker frees more than just the xfs_buf slab
objects - it also frees the pages attached to the buffers. Make sure
the memory reclaim code accounts for this memory being freed
correctly, similar to how the inode shrinker accounts for pages
freed from the page cache due to mapping invalidation.
We also need to make sure that the mm subsystem knows these are
reclaimable objects. We provide the memory reclaim subsystem with a
a shrinker to reclaim xfs_bufs, so we should really mark the slab
that way.
We also have a lot of xfs_bufs in a busy system, spread them around
like we do inodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Running metadata intensive workloads, I've been seeing the AIL
pushing getting stuck on pinned buffers and triggering log forces.
The log force is taking a long time to run because the log IO is
getting throttled by wbt_wait() - the block layer writeback
throttle. It's being throttled because there is a huge amount of
metadata writeback going on which is filling the request queue.
IOWs, we have a priority inversion problem here.
Mark the log IO bios with REQ_IDLE so they don't get throttled
by the block layer writeback throttle. When we are forcing the CIL,
we are likely to need to to tens of log IOs, and they are issued as
fast as they can be build and IO completed. Hence REQ_IDLE is
appropriate - it's an indication that more IO will follow shortly.
And because we also set REQ_SYNC, the writeback throttle will now
treat log IO the same way it treats direct IO writes - it will not
throttle them at all. Hence we solve the priority inversion problem
caused by the writeback throttle being unable to distinguish between
high priority log IO and background metadata writeback.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In certain situations the background CIL push can be indefinitely
delayed. While we have workarounds from the obvious cases now, it
doesn't solve the underlying issue. This issue is that there is no
upper limit on the CIL where we will either force or wait for
a background push to start, hence allowing the CIL to grow without
bound until it consumes all log space.
To fix this, add a new wait queue to the CIL which allows background
pushes to wait for the CIL context to be switched out. This happens
when the push starts, so it will allow us to block incoming
transaction commit completion until the push has started. This will
only affect processes that are running modifications, and only when
the CIL threshold has been significantly overrun.
This has no apparent impact on performance, and doesn't even trigger
until over 45 million inodes had been created in a 16-way fsmark
test on a 2GB log. That was limiting at 64MB of log space used, so
the active CIL size is only about 3% of the total log in that case.
The concurrent removal of those files did not trigger the background
sleep at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current CIL size aggregation limit is 1/8th the log size. This
means for large logs we might be aggregating at least 250MB of dirty objects
in memory before the CIL is flushed to the journal. With CIL shadow
buffers sitting around, this means the CIL is often consuming >500MB
of temporary memory that is all allocated under GFP_NOFS conditions.
Flushing the CIL can take some time to do if there is other IO
ongoing, and can introduce substantial log force latency by itself.
It also pins the memory until the objects are in the AIL and can be
written back and reclaimed by shrinkers. Hence this threshold also
tends to determine the minimum amount of memory XFS can operate in
under heavy modification without triggering the OOM killer.
Modify the CIL space limit to prevent such huge amounts of pinned
metadata from aggregating. We can have 2MB of log IO in flight at
once, so limit aggregation to 16x this size. This threshold was
chosen as it little impact on performance (on 16-way fsmark) or log
traffic but pins a lot less memory on large logs especially under
heavy memory pressure. An aggregation limit of 8x had 5-10%
performance degradation and a 50% increase in log throughput for
the same workload, so clearly that was too small for highly
concurrent workloads on large logs.
This was found via trace analysis of AIL behaviour. e.g. insertion
from a single CIL flush:
xfs_ail_insert: old lsn 0/0 new lsn 1/3033090 type XFS_LI_INODE flags IN_AIL
$ grep xfs_ail_insert /mnt/scratch/s.t |grep "new lsn 1/3033090" |wc -l
1721823
$
So there were 1.7 million objects inserted into the AIL from this
CIL checkpoint, the first at 2323.392108, the last at 2325.667566 which
was the end of the trace (i.e. it hadn't finished). Clearly a major
problem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Separate out the unmount record writing from the rest of the
ticket and log state futzing necessary to make it work. This is
a no-op, just makes the code cleaner and places the unmount record
formatting and writing alongside the commit record formatting and
writing code.
We can also get rid of the ticket flag clearing before the
xlog_write() call because it no longer cares about the state of
XLOG_TIC_INITED.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xlog_write_done() is just a thin wrapper around xlog_commit_record(), so
they can be merged together easily.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove xlog_ticket_done and just call the renamed low-level helpers for
ungranting or regranting log space directly. To make that a little
the reference put on the ticket and all tracing is moved into the actual
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It is not longer used or checked by anything, so remove the last
traces from the log ticket code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_log_done() does two separate things. Firstly, it triggers commit
records to be written for permanent transactions, and secondly it
releases or regrants transaction reservation space.
Since delayed logging was introduced, transactions no longer write
directly to the log, hence they never have the XLOG_TIC_INITED flag
cleared on them. Hence transactions never write commit records to
the log and only need to modify reservation space.
Split up xfs_log_done into two parts, and only call the parts of the
operation needed for the context xfs_log_done() is currently being
called from.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Commit and unmount records records do not need start records to be
written, so rearrange the logic in xlog_write() to remove the need
to check for XLOG_TIC_INITED to determine if we should account for
the space used by a start record.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xlog_write() function iterates over iclogs until it completes
writing all the log vectors passed in. The ticket tracks whether
a start record has been written or not, so only the first iclog gets
a start record. We only ever pass single use tickets to
xlog_write() so we only ever need to write a start record once per
xlog_write() call.
Hence we don't need to store whether we should write a start record
in the ticket as the callers provide all the information we need to
determine if a start record should be written. For the moment, we
have to ensure that we clear the XLOG_TIC_INITED appropriately so
the code in xfs_log_done() still works correctly for committing
transactions.
(darrick: Note the slight behavior change that we always deduct the
size of the op header from the ticket, even for unmount records)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: pass an explicit need_start_rec argument]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Validate the geometry of the realtime geometry when we mount the
filesystem, so that we don't abruptly shut down the filesystem later on.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
I noticed that fsfreeze can take a very long time to freeze an XFS if
there happens to be a GETFSMAP caller running in the background. I also
happened to notice the following in dmesg:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 43492 at fs/xfs/xfs_super.c:853 xfs_quiesce_attr+0x83/0x90 [xfs]
Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 ip_set_hash_ip ip_set_hash_net xt_tcpudp xt_set ip_set_hash_mac ip_set nfnetlink ip6table_filter ip6_tables bfq iptable_filter sch_fq_codel ip_tables x_tables nfsv4 af_packet [last unloaded: xfs]
CPU: 2 PID: 43492 Comm: xfs_io Not tainted 5.6.0-rc4-djw #rc4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:xfs_quiesce_attr+0x83/0x90 [xfs]
Code: 7c 07 00 00 85 c0 75 22 48 89 df 5b e9 96 c1 00 00 48 c7 c6 b0 2d 38 a0 48 89 df e8 57 64 ff ff 8b 83 7c 07 00 00 85 c0 74 de <0f> 0b 48 89 df 5b e9 72 c1 00 00 66 90 0f 1f 44 00 00 41 55 41 54
RSP: 0018:ffffc900030f3e28 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff88802ac54000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff81e4a6f0 RDI: 00000000ffffffff
RBP: ffff88807859f070 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000010 R12: 0000000000000000
R13: ffff88807859f388 R14: ffff88807859f4b8 R15: ffff88807859f5e8
FS: 00007fad1c6c0fc0(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0c7d237000 CR3: 0000000077f01003 CR4: 00000000001606a0
Call Trace:
xfs_fs_freeze+0x25/0x40 [xfs]
freeze_super+0xc8/0x180
do_vfs_ioctl+0x70b/0x750
? __fget_files+0x135/0x210
ksys_ioctl+0x3a/0xb0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
These two things appear to be related. The assertion trips when another
thread initiates a fsmap request (which uses an empty transaction) after
the freezer waited for m_active_trans to hit zero but before the the
freezer executes the WARN_ON just prior to calling xfs_log_quiesce.
The lengthy delays in freezing happen because the freezer calls
xfs_wait_buftarg to clean out the buffer lru list. Meanwhile, the
GETFSMAP caller is continuing to grab and release buffers, which means
that it can take a very long time for the buffer lru list to empty out.
We fix both of these races by calling sb_start_write to obtain freeze
protection while using empty transactions for GETFSMAP and for metadata
scrubbing. The other two users occur during mount, during which time we
cannot fs freeze.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If the bio_add_page() call fails, we proceed to write out a
partially constructed log buffer. This corrupts the physical log
such that log recovery is not possible. Worse, persistent
occurrences of this error eventually lead to a BUG_ON() failure in
bio_split() as iclogs wrap the end of the physical log, which
triggers log recovery on subsequent mount.
Rather than warn about writing out a corrupted log buffer, shutdown
the fs as is done for any log I/O related error. This preserves the
consistency of the physical log such that log recovery succeeds on a
subsequent mount. Note that this was observed on a 64k page debug
kernel without upstream commit 59bb47985c ("mm, sl[aou]b:
guarantee natural alignment for kmalloc(power-of-two)"), which
demonstrated frequent iclog bio overflows due to unaligned (slab
allocated) iclog data buffers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we're checking bestfree information in directory blocks, always
drop the block buffer at the end of the function. We should always
release resources when we're done using them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The dirattr btree checking code uses the altpath substructure of the
dirattr state structure to check the sibling pointers of dir/attr tree
blocks. At the end of sibling checks, xfs_da3_path_shift could have
changed multiple levels of buffer pointers in the altpath structure.
Although we release the leaf level buffer, this isn't enough -- we also
need to release the node buffers that are unique to the altpath.
Not releasing all of the altpath buffers leaves them locked to the
transaction. This is suboptimal because we should release resources
when we don't need them anymore. Fix the function to loop all levels of
the altpath, and fix the return logic so that we always run the loop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When quotacheck runs, it zeroes all the timer fields in every dquot.
Unfortunately, it also does this to the root dquot, which erases any
preconfigured grace intervals and warning limits that the administrator
may have set. Worse yet, the incore copies of those variables remain
set. This cache coherence problem manifests itself as the grace
interval mysteriously being reset back to the defaults at the /next/
mount.
Fix it by not resetting the root disk dquot's timer and warning fields.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Open code the xlog_state_want_sync logic in its two callers given that
this function is a trivial wrapper around xlog_state_switch_iclogs.
Move the lockdep assert into xlog_state_switch_iclogs to not lose this
debugging aid, and improve the comment that documents
xlog_state_switch_iclogs as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the shutdown flag in the log to bypass xlog_state_clean_iclog
entirely in case of a shut down log.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor out a few self-contained helpers from xlog_state_clean_iclog, and
update the documentation so it primarily documents why things happens
instead of how.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We can just check for a shut down log all the way down in
xlog_cil_committed instead of passing the parameter. This means a
slight behavior change in that we now also abort log items if the
shutdown came in halfway into the I/O completion processing, which
actually is the right thing to do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no need to check for the ioerror state before the lock, as
the shutdown case is not a fast path. Also remove the call to force
shutdown the file system, as it must have been shut down already
for an iclog to be in the ioerror state. Also clean up the flow of
the function a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The only caller of xfs_log_release_iclog doesn't care about the return
value, so remove it. Also don't bother passing the mount pointer,
given that we can trivially derive it from the iclog.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor out the shared code to wait for a log force into a new helper.
This helper uses the XLOG_FORCED_SHUTDOWN check previous only used
by the unmount code over the equivalent iclog ioerror state used by
the other two functions.
There is a slight behavior change in that the force of the unmount
record is now accounted in the log force statistics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xlog_cil_push is only called by xlog_cil_push_work, so merge the two
functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We know the version is 3 if on a v5 file system. For earlier file
systems formats we always upgrade the remaining v1 inodes to v2 and
thus only use v2 inodes. Use the xfs_sb_version_has_large_dinode
helper to check if we deal with small or large dinodes, and thus
remove the need for the di_version field in struct icdinode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Only v5 file systems can have the reflink feature, and those will
always use the large dinode format. Remove the extra check for the
inode version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
di_flags2 is initialized to zero for v4 and earlier file systems. This
means di_flags2 can only be non-zero for a v5 file systems, in which
case both the parent and child inodes can store the field. Remove the
extra di_version check, and also remove the rather pointless local
di_flags2 variable while at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The size of the dinode structure is only dependent on the file system
version, so instead of checking the individual inode version just use
the newly added xfs_sb_version_has_large_dinode helper, and simplify
various calling conventions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a new wrapper to check if a file system supports the v3 inode format
with a larger dinode core. Previously we used xfs_sb_version_hascrc for
that, which is technically correct but a little confusing to read.
Also move xfs_dinode_good_version next to xfs_sb_version_has_v3inode
so that we have one place that documents the superblock version to
inode version relationship.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
AIL removal of the quotaoff start intent and free of both quotaoff
intents is currently limited to the ->iop_committed() handler of the
end intent. This executes when the end intent is committed to the
on-disk log and marks the completion of the operation. The problem
with this is it assumes the success of the operation. If a shutdown
or other error occurs during the quotaoff, it's possible for the
quotaoff task to exit without removing the start intent from the
AIL. This results in an unmount hang as the AIL cannot be emptied.
Further, no other codepath frees the intents and so this is also a
memory leak vector.
First, update the high level quotaoff error path to directly remove
and free the quotaoff start intent if it still exists in the AIL at
the time of the error. Next, update both of the start and end
quotaoff intents with an ->iop_release() callback to properly handle
transaction abort.
This means that If the quotaoff start transaction aborts, it frees
the start intent in the transaction commit path. If the filesystem
shuts down before the end transaction allocates, the quotaoff
sequence removes and frees the start intent. If the end transaction
aborts, it removes the start intent and frees both. This ensures
that a shutdown does not result in a hung unmount and that memory is
not leaked regardless of when a quotaoff error occurs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
AIL removal of the quotaoff start intent and free of both intents is
hardcoded to the ->iop_committed() handler of the end intent. Factor
out the start intent handling code so it can be used in a future
patch to properly handle quotaoff errors. Use xfs_trans_ail_remove()
instead of the _delete() variant to acquire the AIL lock and also
handle cases where an intent might not reside in the AIL at the
time of a failure.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add support for btree staging cursors for the rmap btrees. This is
needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add support for btree staging cursors for the refcount btrees. This
is needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add support for btree staging cursors for the inode btrees. This
is needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add support for btree staging cursors for the free space btrees. This
is needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a new btree function that enables us to bulk load a btree cursor.
This will be used by the upcoming online repair patches to generate new
btrees. This avoids the programmatic inefficiency of calling
xfs_btree_insert in a loop (which generates a lot of log traffic) in
favor of stamping out new btree blocks with ordered buffers, and then
committing both the new root and scheduling the removal of the old btree
blocks in a single transaction commit.
The design of this new generic code is based off the btree rebuilding
code in xfs_repair's phase 5 code, with the explicit goal of enabling us
to share that code between scrub and repair. It has the additional
feature of being able to control btree block loading factors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create an in-core fake root for inode-rooted btree types so that callers
can generate a whole new btree using the upcoming btree bulk load
function without making the new tree accessible from the rest of the
filesystem. It is up to the individual btree type to provide a function
to create a staged cursor (presumably with the appropriate callouts to
update the fakeroot) and then commit the staged root back into the
filesystem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create an in-core fake root for AG-rooted btree types so that callers
can generate a whole new btree using the upcoming btree bulk load
function without making the new tree accessible from the rest of the
filesystem. It is up to the individual btree type to provide a function
to create a staged cursor (presumably with the appropriate callouts to
update the fakeroot) and then commit the staged root back into the
filesystem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a xbitmap_hweight helper function so that we can get rid of the
open-coded loop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Shorten the name of xfs_bitmap to xbitmap since the scrub bitmap has
nothing to do with the libxfs bitmap.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Remove the xfs_bitmap_destroy call from the end of xrep_reap_extents
because this sort of violates our rule that the function initializing a
structure should destroy it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When I lifted the code in xfs_alloc_ag_vextent_lastblock out of a loop,
I forgot to convert all the accesses to len to be pointer dereferences.
Coverity-id: 1457918
Fixes: 5113f8ec37 ("xfs: clean up weird while loop in xfs_alloc_ag_vextent_near")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If the xfs_buf_map array allocation in xfs_dabuf_map fails for whatever
reason, we bail out with error code zero. This will confuse callers, so
make sure that we return ENOMEM. Allocation failure should never happen
with the small size of the array, but code defensively anyway.
Fixes: 45feef8f50 ("xfs: refactor xfs_dabuf_map")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Move the code for verifying the iclog state on a clean unmount into a
helper, and instead of checking the iclog state just rely on the shutdown
check as they are equivalent. Also remove the ifdef DEBUG as the
compiler is smart enough to eliminate the dead code for non-debug builds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When the log is shut down all iclogs are in the XLOG_STATE_IOERROR state,
which means that xlog_state_want_sync and xlog_state_release_iclog are
no-ops. Remove the whole section of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the ignored return value from xfs_log_unmount_write, and also
remove a rather pointless assert on the return value from xfs_log_force.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A shutdown log is a slow failure path. Add an unlikely annotation to
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This is much less widely used than the bc_private union was, so this
is done as a single patch. The named union xfs_btree_cur_private
goes away and is embedded into the struct xfs_btree_cur_ag as an
anonymous union, and the code is modified via this script:
$ sed -i 's/priv\.\([abt|refc]\)/\1/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
we need to name the btree cursor private structures to be able
to pull them out of the deeply nested structure definition they are
in now.
Based on code extracted from a patchset by Darrick Wong.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Rename the union and it's internal structures to the new name and
remove the temporary defines that facilitated the change.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
BPRV is not longer appropriate because bc_private is going away.
Script:
$ sed -i 's/BTCUR_BPRV/BTCUR_BMBT/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
With manual cleanup to the definitions in fs/xfs/libxfs/xfs_btree.h
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: change "BC_BT" to "BTCUR_BMBT", fix subject line typo]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
bc_private.b -> bc_ino conversion via script:
$ sed -i 's/bc_private\.b/bc_ino/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
And then revert the change to the bc_ino #define in
fs/xfs/libxfs/xfs_btree.h manually.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: tweak the subject line slightly]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
bc_private.a -> bc_ag conversion via script:
`sed -i 's/bc_private\.a/bc_ag/g' fs/xfs/*[ch] fs/xfs/*/*[ch]`
And then revert the change to the bc_ag #define in
fs/xfs/libxfs/xfs_btree.h manually.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Just the defines of the new names - the conversion will be in
scripted commits after this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: change "bc_bt" to "bc_ino"]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Commit 263dde869b ("xfs: cleanup xfs_dir2_block_getdents") introduced
a getdents regression, when it converted the pointer arithmetics to
offset calculations: offset is updated in the loop already for the next
iteration, but the updated offset value is used incorrectly in two
places, where we should have used the not-yet-updated value.
This caused for example "git clean -ffdx" failures to cleanup certain
directory structures when running in a container.
Fix the regression by making sure we use proper offset in the loop body.
Thanks to Christoph Hellwig for suggestion how to best fix the code.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 263dde869b ("xfs: cleanup xfs_dir2_block_getdents")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In xchk_xattr_listent, we attempt to validate the extended attribute
hash structures by performing a attr lookup by (hashed) name. If the
lookup returns ENODATA, that means that the hash information is corrupt.
The _process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xchk_dir_actor, we attempt to validate the directory hash structures
by performing a directory entry lookup by (hashed) name. If the lookup
returns ENOENT, that means that the hash information is corrupt. The
_process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check the owner field of dir3 block headers. If it's corrupt, release
the buffer and return EFSCORRUPTED. All callers handle this properly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check the owner field of dir3 data block headers. If it's corrupt,
release the buffer and return EFSCORRUPTED. All callers handle this
properly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check the owner field of dir3 free block headers and reject the metadata
if there's something wrong with it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If we decide that a directory free block is corrupt, we must take care
not to leak a buffer pointer to the caller. After xfs_trans_brelse
returns, the buffer can be freed or reused, which means that we have to
set *bpp back to NULL.
Callers are supposed to notice the nonzero return value and not use the
buffer pointer, but we should code more defensively, even if all current
callers handle this situation correctly.
Fixes: de14c5f541 ("xfs: verify free block header fields")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
xfs_verifier_error is supposed to be called on a corrupt metadata buffer
from within a buffer verifier function, whereas xfs_buf_mark_corrupt
is the function to be called when a piece of code has read a buffer and
catches something that a read verifier cannot. The first function sets
b_error anticipating that the low level buffer handling code will see
the nonzero b_error and clear XBF_DONE on the buffer, whereas the second
function does not.
Since xfs_dir3_free_header_check examines fields in the dir free block
header that require more context than can be provided to read verifiers,
we must call xfs_buf_mark_corrupt when it finds a problem.
Switching the calls has a secondary effect that we no longer corrupt the
buffer state by setting b_error and leaving XBF_DONE set. When /that/
happens, we'll trip over various state assertions (most commonly the
b_error check in xfs_buf_reverify) on a subsequent attempt to read the
buffer.
Fixes: bc1a09b8e3 ("xfs: refactor verifier callers to print address of failing check")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a xfs_failaddr_t parameter to this function so that callers can
potentially pass in (and therefore report) the exact point in the code
where we decided that a metadata buffer was corrupt. This enables us to
wire it up to checking functions that have to run outside of verifiers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a helper function to get rid of buffers that we have decided are
corrupt after the verifiers have run. This function is intended to
handle metadata checks that can't happen in the verifiers, such as
inter-block relationship checking. Note that we now mark the buffer
stale so that it will not end up on any LRU and will be purged on
release.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In e7ee96dfb8, we converted all ITER_ABORT users to use ECANCELED
instead, but we forgot to teach xfs_rmap_has_other_keys not to return
that magic value to callers. Fix it now by using ECANCELED both to
abort the iteration and to signal that we found another reverse mapping.
This enables us to drop the separate boolean flag.
Fixes: e7ee96dfb8 ("xfs: remove all *_ITER_ABORT values")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Log the corrupt buffer before we release the buffer.
Fixes: a5155b870d ("xfs: always log corruption errors")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is just a single user left, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
struct xfs_agfl is a header in front of the AGFL entries that exists
for CRC enabled file systems. For not CRC enabled file systems the AGFL
is simply a list of agbno. Make the CRC case similar to that by just
using the list behind the new header. This indirectly solves a problem
with modern gcc versions that warn about taking addresses of packed
structures (and we have to pack the AGFL given that gcc rounds up
structure sizes). Also replace the helper macro to get from a buffer
with an inline function in xfs_alloc.h to make the code easier to
read.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set
during do_exit(). That can confuse things. In particular, if BSD
process accounting is enabled, then do_exit() writes data to an
accounting file. If that file has FS_SYNC_FL set, then this write
occurs synchronously and can misbehave if PF_MEMALLOC is set.
For example, if the accounting file is located on an XFS filesystem,
then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data
doesn't get written when it should. Or if the accounting file is
located on an ext4 filesystem without a journal, then a WARN_ON_ONCE()
in ext4_write_inode() is triggered and the inode doesn't get written.
Fix this in xfsaild() by using the helper functions to save and restore
PF_MEMALLOC.
This can be reproduced as follows in the kvm-xfstests test appliance
modified to add the 'acct' Debian package, and with kvm-xfstests's
recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y:
mkfs.xfs -f /dev/vdb
mount /vdb
touch /vdb/file
chattr +S /vdb/file
accton /vdb/file
mkfs.xfs -f /dev/vdc
mount /vdc
umount /vdc
It causes:
WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534
CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534
[...]
Call Trace:
write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238
iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642
xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578
do_writepages+0x41/0xe0 mm/page-writeback.c:2344
__filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421
file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760
xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114
generic_write_sync include/linux/fs.h:2867 [inline]
xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691
call_write_iter include/linux/fs.h:1901 [inline]
new_sync_write+0x130/0x1d0 fs/read_write.c:483
__kernel_write+0x54/0xe0 fs/read_write.c:515
do_acct_process+0x122/0x170 kernel/acct.c:522
slow_acct_process kernel/acct.c:581 [inline]
acct_process+0x1d4/0x27c kernel/acct.c:607
do_exit+0x83d/0xbc0 kernel/exit.c:791
kthread+0xf1/0x140 kernel/kthread.c:257
ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352
This bug was originally reported by syzbot at
https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com.
Reported-by: syzbot+1f9dc49e8de2582d90c2@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Let the low-level attr code only allocate the needed buffer size
for xfs_attrmulti_attr_get instead of allocating the upper bound
at the top of the call chain.
Suggested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
No need to allocate the max size if we can just allocate the easily
known actual ACL size.
Suggested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the round_down macro, and use the size of the uint32 type we
use in the callback that fills the buffer to make the code a little
more clear - the size of it is always the same as int for platforms
that Linux runs on.
Suggested-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The attrlist cursor only exists as part of an attr list context, so
embedd the structure instead of pointing to it. Also give it a proper
xfs_ prefix and remove the obsolete typedef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we use the on-disk flags field also for the interface to the
lower level attr routines we can use the XFS_ATTR_INCOMPLETE definition
from the on-disk format directly instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The ATTR_* flags have a long IRIX history, where they a userspace
interface, the on-disk format and an internal interface. We've split
out the on-disk interface to the XFS_ATTR_* values, but despite (or
because?) of that the flag have still been a mess. Switch the
internal interface to pass the on-disk XFS_ATTR_* flags for the
namespace and the Linux XATTR_* flags for the actual flags instead.
The ATTR_* values that are actually used are move to xfs_fs.h with a
new XFS_IOC_* prefix to not conflict with the userspace version that
has the same name and must have the same value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove superflous braces, elses after return statements and use a goto
label to merge common error handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the function to xfs_acl.c and provide a proper stub for the
!CONFIG_XFS_POSIX_ACL case. Lift the flags check to the caller as it
nicely fits in there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Lift the common code to copy the cursor from and to user space into
xfs_ioc_attr_list. Note that this means we copy in twice now as
the cursor is in the middle of the conaining structure, but we never
touch the memory for the original copy. Doing so keeps the cursor
handling isolated in the common helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Lift the buffer allocation from the two callers into xfs_ioc_attr_list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Lift the flags and bufsize checks from both callers into the common code
in xfs_ioc_attr_list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
