The current implementation of fw_devlink is very inefficient because it
tries to get away without creating fwnode links in the name of saving
memory usage. Past attempts to optimize runtime at the cost of memory
usage were blocked with request for data showing that the optimization
made significant improvement for real world scenarios.
We have those scenarios now. There have been several reports of boot
time increase in the order of seconds in this thread [1]. Several OEMs
and SoC manufacturers have also privately reported significant
(350-400ms) increase in boot time due to all the parsing done by
fw_devlink.
So this patch uses all the setup done by the previous patches in this
series to refactor fw_devlink to be more efficient. Most of the code has
been moved out of firmware specific (DT mostly) code into driver core.
This brings the following benefits:
- Instead of parsing the device tree multiple times during bootup,
fw_devlink parses each fwnode node/property only once and creates
fwnode links. The rest of the fw_devlink code then just looks at these
fwnode links to do rest of the work.
- Makes it much easier to debug probe issue due to fw_devlink in the
future. fw_devlink=on blocks the probing of devices if they depend on
a device that hasn't been added yet. With this refactor, it'll be very
easy to tell what that device is because we now have a reference to
the fwnode of the device.
- Much easier to add fw_devlink support to ACPI and other firmware
types. A refactor to move the common bits from DT specific code to
driver core was in my TODO list as a prerequisite to adding ACPI
support to fw_devlink. This series gets that done.
[1] - https://lore.kernel.org/linux-omap/ea02f57e-871d-cd16-4418-c1da4bbc4696@ti.com/
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-17-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To check if a device is still waiting for its supplier devices to be
added, we used to check if the devices is in a global
waiting_for_suppliers list. Since the global list will be deleted in
subsequent patches, this patch stops using this check.
Instead, this patch uses a more device specific check. It checks if the
device's fwnode has any fwnode links that haven't been converted to
device links yet.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-14-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is a wrapper around fwnode_operations.add_links().
This function parses each node in a fwnode tree and create fwnode links
for each of those nodes. The information for creating the fwnode links
(the supplier and consumer fwnode) is obtained by parsing the properties
in each of the fwnodes.
This function also ensures that no fwnode is parsed more than once by
marking the fwnodes as parsed.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-13-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add fwnode_is_ancestor_of() helper function to check if a fwnode is an
ancestor of another fwnode.
Add fwnode_get_next_parent_dev() helper function that take as input a
fwnode and finds the closest ancestor fwnode that has a corresponding
struct device and returns that struct device.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-11-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SYNC_STATE_ONLY device links only affect the behavior of sync_state()
callbacks. Specifically, they prevent sync_state() only callbacks from
being called on a device if one or more of its consumers haven't probed.
So, creating a SYNC_STATE_ONLY device link from an already probed
consumer is useless. So, don't allow creating such device links.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-10-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 716a7a2596.
The fw_devlink_pause/resume() APIs added by the commit being reverted
were a first cut attempt at optimizing boot time. But these APIs don't
fully solve the problem and are very fragile (can only be used for the
top level devices being added). This series replaces them with a much
better optimization that works for all device additions and also has the
benefit of reducing the complexity of the firmware (DT, EFI) specific
code and abstracting out common code to driver core.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-7-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device_links_purge() function (called from device_del()) tries to
remove the links.needs_suppliers list entry, but it's using
list_del(), hence it doesn't initialize after the removal. This is OK
for normal cases where device_del() is called via device_destroy().
However, it's not guaranteed that the device object will be really
deleted soon after device_del(). In a minor case like HD-audio codec
reconfiguration that re-initializes the device after device_del(), it
may lead to a crash by the corrupted list entry.
As a simple fix, replace list_del() with list_del_init() in order to
make the list intact after the device_del() call.
Fixes: e2ae9bcc4a ("driver core: Add support for linking devices during device addition")
Cc: <stable@vger.kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201208190326.27531-1-tiwai@suse.de
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been found that some users (like cpufreq-dt and others on LKML)
have abused the helper dev_pm_opp_get_opp_table() to create the OPP
table instead of just finding it, which is the wrong thing to do. This
routine was meant for OPP core's internal working and exposed the whole
functionality by mistake.
Change the scope of dev_pm_opp_get_opp_table() to only finding the
table. The internal helpers _opp_get_opp_table*() are thus renamed to
_add_opp_table*(), dev_pm_opp_get_opp_table_indexed() is removed (as we
don't need the index field for finding the OPP table) and so the only
user, genpd, is updated.
Note that the prototype of _add_opp_table() was already left in opp.h by
mistake when it was removed earlier and so we weren't required to add it
now.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MIPI SoundWire Device Class standard will define audio functionality
beyond the scope of the existing SoundWire 1.2 standard, which is limited
to the bus and interface.
The description is inspired by the USB Audio Class, with "functions",
"entities", "control selectors", "audio clusters". The main difference
with the USB Audio class is that the devices are typically on a motherboard
and descriptors stored in platform firmware instead of being retrieved
from the device.
The current set of devices managed in this patchset are conformant with the
SDCA 0.6 specification and require dedicated drivers since the descriptors
and platform firmware specification is not complete at this time. They do
however rely on the hierarchical addressing required by the SDCA standard.
Future devices conformant with SDCA 1.0 should rely on a class driver.
This series adds support for the hierarchical SDCA addressing and extends
regmap. It then provides 3 codecs for RT711-sdca headset codec, RT1316
amplifier and RT715-scda microphone codec.
Note that the release of this code before the formal adoption of the
SDCA 1.0 specification was formally endorsed by the MIPI Board to make
sure there is no delay for Linux-based support of this specification.
Jack Yu (1):
ASoC/SoundWire: rt715-sdca: First version of rt715 sdw sdca codec
driver
Pierre-Louis Bossart (2):
soundwire: SDCA: add helper macro to access controls
regmap/SoundWire: sdw: add support for SoundWire 1.2 MBQ
Shuming Fan (2):
ASoC/SoundWire: rt1316: Add RT1316 SDCA vendor-specific driver
ASoC/SoundWire: rt711-sdca: Add RT711 SDCA vendor-specific driver
drivers/base/regmap/Kconfig | 6 +-
drivers/base/regmap/Makefile | 1 +
drivers/base/regmap/regmap-sdw-mbq.c | 101 ++
include/linux/regmap.h | 35 +
include/linux/soundwire/sdw_registers.h | 32 +
sound/soc/codecs/Kconfig | 20 +
sound/soc/codecs/Makefile | 6 +
sound/soc/codecs/rt1316-sdw.c | 756 ++++++++++++
sound/soc/codecs/rt1316-sdw.h | 115 ++
sound/soc/codecs/rt711-sdca-sdw.c | 424 +++++++
sound/soc/codecs/rt711-sdca-sdw.h | 101 ++
sound/soc/codecs/rt711-sdca.c | 1481 +++++++++++++++++++++++
sound/soc/codecs/rt711-sdca.h | 246 ++++
sound/soc/codecs/rt715-sdca-sdw.c | 278 +++++
sound/soc/codecs/rt715-sdca-sdw.h | 170 +++
sound/soc/codecs/rt715-sdca.c | 936 ++++++++++++++
sound/soc/codecs/rt715-sdca.h | 124 ++
17 files changed, 4831 insertions(+), 1 deletion(-)
create mode 100644 drivers/base/regmap/regmap-sdw-mbq.c
create mode 100644 sound/soc/codecs/rt1316-sdw.c
create mode 100644 sound/soc/codecs/rt1316-sdw.h
create mode 100644 sound/soc/codecs/rt711-sdca-sdw.c
create mode 100644 sound/soc/codecs/rt711-sdca-sdw.h
create mode 100644 sound/soc/codecs/rt711-sdca.c
create mode 100644 sound/soc/codecs/rt711-sdca.h
create mode 100644 sound/soc/codecs/rt715-sdca-sdw.c
create mode 100644 sound/soc/codecs/rt715-sdca-sdw.h
create mode 100644 sound/soc/codecs/rt715-sdca.c
create mode 100644 sound/soc/codecs/rt715-sdca.h
base-commit: 3650b228f8
--
2.17.1
The SoundWire 1.1 specification only allowed for reads and writes of
bytes. The SoundWire 1.2 specification adds a new capability to
transfer "Multi-Byte Quantities" (MBQ) across the bus. The transfers
still happens one-byte-at-a-time, but the update is atomic.
For example when writing a 16-bit volume, the first byte transferred
is only taken into account when the second byte is successfully
transferred.
The mechanism is symmetrical for read and writes:
- On a read, the address of the last byte to be read is modified by
setting the MBQ bit
- On a write, the address of all but the last byte to be written are
modified by setting the MBQ bit. The address for the last byte relies
on the MBQ bit being cleared.
The current definitions for MBQ-based controls in the SDCA draft
standard are limited to 16 bits for volumes, so for now this is the
only supported format. An update will be provided if and when support
for 24-bit and 32-bit values is specified by the SDCA standard.
One possible objection is that this code could have been handled with
regmap-sdw.c. However this is a new spec addition not handled by every
SoundWire 1.1 and non-SDCA device, so there's no reason to load code
that will never be used.
Also in practice it's extremely unlikely that CONFIG_REGMAP would not
be selected with CONFIG_REGMAP_MBQ selected. However there's no
functional dependency between the two modules so they can be selected
separately.
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201103172226.4278-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dev_pm_genpd_suspend|resume() have so far only been used during the
syscore suspend/resume phases. However, during suspend-to-idle, where the
syscore phases doesn't exist, similar operations are sometimes needed.
An existing example are the timekeeping_suspend|resume() functions, which
are being called both through a registered syscore ops during the syscore
phases, but also as regular functions calls from cpuidle (via
tick_freeze()) during suspend-to-idle.
For similar reasons, let's enable the dev_pm_genpd_suspend|resume() APIs to
be re-used for corresponding CPU devices that are attached to a genpd,
during suspend-to-idle.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To better describe what the pm_genpd_syscore_poweroff|poweron() functions
actually do, let's rename them to dev_pm_genpd_suspend|resume() and update
the rather few callers of them accordingly (a couple of clocksource
drivers).
Moreover, let's take the opportunity to add some documentation of these
exported functions, as that is currently missing.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently there are 4 driver flags to control system suspend/resume
behavior: DPM_FLAG_NO_DIRECT_COMPLETE, DPM_FLAG_SMART_PREPARE,
DPM_FLAG_SMART_SUSPEND and DPM_FLAG_MAY_SKIP_RESUME.
Print these flags during suspend/resume so as to get a brief
understanding of the expected behavior of each device, and to
facilitate suspend/resume debugging/tuning.
To enable this tracing:
echo 'file drivers/base/power/main.c +p' >
/sys/kernel/debug/dynamic_debug/control
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the device is resumed from runtime-suspend in
__device_release_driver() anyway, it is better to do that before
looking for busy managed device links from it to consumers, because
if there are any, device_links_unbind_consumers() will be called
and it will cause the consumer devices' drivers to unbind, so the
consumer devices will be runtime-resumed. In turn, resuming each
consumer device will cause the supplier to be resumed and when the
runtime PM references from the given consumer to it are dropped, it
may be suspended. Then, the runtime-resume of the next consumer
will cause the supplier to resume again and so on.
Update the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes: 9ed9895370 ("driver core: Functional dependencies tracking support")
Cc: All applicable <stable@vger.kernel.org> # All applicable
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit d12544fb2a ("PM: runtime: Remove link state checks in
rpm_get/put_supplier()") nothing prevents the consumer device's
runtime PM from acquiring additional references to the supplier
device after pm_runtime_clean_up_links() has run (or even while it
is running), so calling this function from __device_release_driver()
may be pointless (or even harmful).
Moreover, it ignores stateless device links, so the runtime PM
handling of managed and stateless device links is inconsistent
because of it, so better get rid of it entirely.
Fixes: d12544fb2a ("PM: runtime: Remove link state checks in rpm_get/put_supplier()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While removing a device link, drop the supplier device's runtime PM
usage counter as many times as needed to drop all of the runtime PM
references to it from the consumer in addition to dropping the
consumer's link count.
Fixes: baa8809f60 ("PM / runtime: Optimize the use of device links")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears that firmware nodes can be shared between devices. In such case
when a (child) device is about to be deleted, its firmware node may be shared
and ACPI_COMPANION_SET(..., NULL) call for it breaks the secondary link
of the shared primary firmware node.
In order to prevent that, check, if the device has a parent and parent's
firmware node is shared with its child, and avoid crashing the link.
Fixes: c15e1bdda4 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()")
Reported-by: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Behind primary and secondary we understand the type of the nodes
which might define their ordering. However, if primary node gone,
we can't maintain the ordering by definition of the linked list.
Thus, by ordering secondary node becomes first in the list.
But in this case the meaning of it is still secondary (or auxiliary).
The type of the node is maintained by the secondary pointer in it:
secondary pointer Meaning
NULL or valid primary node
ERR_PTR(-ENODEV) secondary node
So, if by some reason we do the following sequence of calls
set_primary_fwnode(dev, NULL);
set_primary_fwnode(dev, primary);
we should preserve secondary node.
This concept is supported by the description of set_primary_fwnode()
along with implementation of set_secondary_fwnode(). Hence, fix
the commit c15e1bdda4 to follow this as well.
Fixes: c15e1bdda4 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()")
Cc: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some platforms (eg armv7 due to the CONFIG_ARM_DMA_MEM_BUFFERABLE)
MMIO R/W operations always add memory barriers which can increase load,
decrease battery life or in general reduce performance unnecessarily
on devices which access a lot of configuration registers and where
ordering does not matter (eg. media accelerators like the Verisilicon /
Hantro video decoders).
Drivers used to call the relaxed MMIO variants directly but since they
are now accessing the MMIO registers via regmaps (to compensate for
different VPU HW reg layouts via regmap fields), there is a need for a
relaxed API / config to preserve existing behaviour.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://lore.kernel.org/r/20201014203024.954369-1-adrian.ratiu@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull more power management updates from Rafael Wysocki:
"First of all, the adaptive voltage scaling (AVS) drivers go to new
platform-specific locations as planned (this part was reported to have
merge conflicts against the new arm-soc updates in linux-next).
In addition to that, there are some fixes (intel_idle, intel_pstate,
RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state
accounting support to the generic power domains (genpd) code and some
janitorial changes all over.
Specifics:
- Move the AVS drivers to new platform-specific locations and get rid
of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra)"
* tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
PM: sleep: remove unreachable break
PM: AVS: Drop the avs directory and the corresponding Kconfig
PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
PM: runtime: Fix typo in pm_runtime_set_active() helper comment
PM: domains: Fix build error for genpd notifiers
powercap: Fix typo in Kconfig "Plance" -> "Plane"
cpufreq: schedutil: restore cached freq when next_f is not changed
acpi-cpufreq: Honor _PSD table setting on new AMD CPUs
PM: AVS: smartreflex Move driver to soc specific drivers
PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
PM: domains: enable domain idle state accounting
PM: domains: Add curly braces to delimit comment + statement block
PM: domains: Add support for PM domain on/off notifiers for genpd
powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
powercap/intel_rapl: Fix domain detection
intel_idle: Ignore _CST if control cannot be taken from the platform
cpuidle: Remove pointless stub
intel_idle: mention assumption that WBINVD is not needed
MAINTAINERS: Add section for cpuidle-psci PM domain
cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver
...
A break following a return statement is pointless, so drop it.
Signed-off-by: Tom Rix <trix@redhat.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The __raw_notifier_call_chain() was recently removed and replaced with
raw_notifier_call_chain_robust(). Recent changes to genpd didn't take that
into account, which causes a build error. Let's fix this by converting to
the raw_notifier_call_chain_robust() in genpd.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull documentation updates from Mauro Carvalho Chehab:
"A series of patches addressing warnings produced by make htmldocs.
This includes:
- kernel-doc markup fixes
- ReST fixes
- Updates at the build system in order to support newer versions of
the docs build toolchain (Sphinx)
After this series, the number of html build warnings should reduce
significantly, and building with Sphinx 3.1 or later should now be
supported (although it is still recommended to use Sphinx 2.4.4).
As agreed with Jon, I should be sending you a late pull request by the
end of the merge window addressing remaining issues with docs build,
as there are a number of warning fixes that depends on pull requests
that should be happening along the merge window.
The end goal is to have a clean htmldocs build on Kernel 5.10.
PS. It should be noticed that Sphinx 3.0 is not currently supported,
as it lacks support for C domain namespaces. Such feature, needed in
order to document uAPI system calls with Sphinx 3.x, was added only on
Sphinx 3.1"
* tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits)
PM / devfreq: remove a duplicated kernel-doc markup
mm/doc: fix a literal block markup
workqueue: fix a kernel-doc warning
docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup
Input: sparse-keymap: add a description for @sw
rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu
nl80211: docs: add a description for s1g_cap parameter
usb: docs: document altmode register/unregister functions
kunit: test.h: fix a bad kernel-doc markup
drivers: core: fix kernel-doc markup for dev_err_probe()
docs: bio: fix a kerneldoc markup
kunit: test.h: solve kernel-doc warnings
block: bio: fix a warning at the kernel-doc markups
docs: powerpc: syscall64-abi.rst: fix a malformed table
drivers: net: hamradio: fix document location
net: appletalk: Kconfig: Fix docs location
dt-bindings: fix references to files converted to yaml
memblock: get rid of a :c:type leftover
math64.h: kernel-docs: Convert some markups into normal comments
media: uAPI: buffer.rst: remove a left-over documentation
...
To enable better debug of PM domains, keep a track of successful
and failing attempts to enter each domain idle state.
This statistics are exported in debugfs when reading the
idle_states node associated with each PM domain.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is not strict need to group a comment and a single statement in an
if block, as comments are stripped by the pre-processor. However,
adding curly braces does make the code easier to read, and may avoid
mistakes when changing the code later.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
