A system can validate EVM digital signatures without requiring an HMAC
key, but every EVM validation will generate a kernel error. Change this
so we only generate an error once.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
EVM will only perform validation once a key has been loaded. This key
may either be a symmetric trusted key (for HMAC validation and creation)
or the public half of an asymmetric key (for digital signature
validation). The /sys/kernel/security/evm interface allows userland to
signal that a symmetric key has been loaded, but does not allow userland
to signal that an asymmetric public key has been loaded.
This patch extends the interface to permit userspace to pass a bitmask
of loaded key types. It also allows userspace to block loading of a
symmetric key in order to avoid a compromised system from being able to
load an additional key type later.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Apparmor will be gaining support for security.apparmor labels, and it
would be helpful to include these in EVM validation now so appropriate
signatures can be generated even before full support is merged.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: John Johansen <John.johansen@canonical.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The file hash is calculated and written out as an xattr after
calling fasync(). In order for the file data and metadata to be
written out to disk at the same time, this patch calculates the
file hash and stores it as an xattr before calling fasync.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The CONFIG_IMA_LOAD_X509 and CONFIG_EVM_LOAD_X509 options permit
loading x509 signed certificates onto the trusted keyrings without
verifying the x509 certificate file's signature.
This patch replaces the call to the integrity_read_file() specific
function with the common kernel_read_file_from_path() function.
To avoid verifying the file signature, this patch defines
READING_X509_CERTFICATE.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
All files matching a "measure" rule must be included in the IMA
measurement list, even when the file hash cannot be calculated.
Similarly, all files matching an "audit" rule must be audited, even when
the file hash can not be calculated.
The file data hash field contained in the IMA measurement list template
data will contain 0's instead of the actual file hash digest.
Note:
In general, adding, deleting or in anyway changing which files are
included in the IMA measurement list is not a good idea, as it might
result in not being able to unseal trusted keys sealed to a specific
TPM PCR value. This patch not only adds file measurements that were
not previously measured, but specifies that the file hash value for
these files will be 0's.
As the IMA measurement list ordering is not consistent from one boot
to the next, it is unlikely that anyone is sealing keys based on the
IMA measurement list. Remote attestation servers should be able to
process these new measurement records, but might complain about
these unknown records.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
The securityfs policy file is removed unless additional rules can be
appended to the IMA policy (CONFIG_IMA_WRITE_POLICY), regardless as
to whether the policy is configured so that it can be displayed.
This patch changes this behavior, removing the securityfs policy file,
only if CONFIG_IMA_READ_POLICY is also not enabled.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The mount i_version flag is not enabled in the new sb_flags. This patch
adds the missing SB_I_VERSION flag.
Fixes: e462ec5 "VFS: Differentiate mount flags (MS_*) from internal
superblock flags"
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Supply the Smack module hooks in support of overlayfs.
Ensure that the Smack label of new files gets the correct
value when a directory is transmuting. Original implementation
by Romanini Daniele, with a few tweaks added.
Signed-off-by: Romanini Daniele <daniele.romanini@aalto.fi>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Emails to David's listed email address bounce, and in the commit log
there's no activity from him within the last 5 years.
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: David Safford <safford@us.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Tomoyo uses an open-coded version of time_to_tm() to create a timestamp
from the current time as read by get_seconds(). This will overflow and
give wrong results on 32-bit systems in 2038.
To correct this, this changes the code to use ktime_get_real_seconds()
and the generic time64_to_tm() function that are both y2038-safe.
Using the library function avoids adding an expensive 64-bit division
in this code and can benefit from any optimizations we do in common
code.
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The existing condition tested for process effective capabilities set by
file attributes but intended to ignore the change if the result was
unsurprisingly an effective full set in the case root is special with a
setuid root executable file and we are root.
Stated again:
- When you execute a setuid root application, it is no surprise and
expected that it got all capabilities, so we do not want capabilities
recorded.
if (pE_grew && !(pE_fullset && (eff_root || real_root) && root_priveleged) )
Now make sure we cover other cases:
- If something prevented a setuid root app getting all capabilities and
it wound up with one capability only, then it is a surprise and should
be logged. When it is a setuid root file, we only want capabilities
when the process does not get full capabilities..
root_priveleged && setuid_root && !pE_fullset
- Similarly if a non-setuid program does pick up capabilities due to
file system based capabilities, then we want to know what capabilities
were picked up. When it has file system based capabilities we want
the capabilities.
!is_setuid && (has_fcap && pP_gained)
- If it is a non-setuid file and it gets ambient capabilities, we want
the capabilities.
!is_setuid && pA_gained
- These last two are combined into one due to the common first parameter.
Related: https://github.com/linux-audit/audit-kernel/issues/16
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Now that the logic is inverted, it is much easier to see that both real
root and effective root conditions had to be met to avoid printing the
BPRM_FCAPS record with audit syscalls. This meant that any setuid root
applications would print a full BPRM_FCAPS record when it wasn't
necessary, cluttering the event output, since the SYSCALL and PATH
records indicated the presence of the setuid bit and effective root user
id.
Require only one of effective root or real root to avoid printing the
unnecessary record.
Ref: commit 3fc689e96c ("Add audit_log_bprm_fcaps/AUDIT_BPRM_FCAPS")
See: https://github.com/linux-audit/audit-kernel/issues/16
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The way the logic was presented, it was awkward to read and verify.
Invert the logic using DeMorgan's Law to be more easily able to read and
understand.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Remove a layer of conditional logic to make the use of conditions
easier to read and analyse.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Move the audit log decision logic to its own function to isolate the
complexity in one place.
Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Introduce a number of inlines to make the use of the negation of
uid_eq() easier to read and analyse.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Introduce inline root_privileged() to make use of SECURE_NONROOT
easier to read.
Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Rename has_cap to has_fcap to clarify it applies to file capabilities
since the entire source file is about capabilities.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Introduce macros cap_gained, cap_grew, cap_full to make the use of the
negation of is_subset() easier to read and analyse.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Factor out the case of privileged root from the function
cap_bprm_set_creds() to make the latter easier to read and analyse.
Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
This commit fixes the duplicate inline declaration specifier in
tpm2_rc_value which caused a warning
Signed-off-by: Ruben Roy <rubenroy2005@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Use __le32 type for data in that format.
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
The local variable 'handle' should have the type __be32 instead of u32.
Fixes: 745b361e98 ("tpm: infrastructure for TPM spaces")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
The local variable 'attrs' should have the type __be32 instead of u32.
Fixes: 58472f5cd4 ("tpm: validate TPM 2.0 commands")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
tpm_transmit() does not offer an explicit interface to indicate the number
of valid bytes in the communication buffer. Instead, it relies on the
commandSize field in the TPM header that is encoded within the buffer.
Therefore, ensure that a) enough data has been written to the buffer, so
that the commandSize field is present and b) the commandSize field does not
announce more data than has been written to the buffer.
This should have been fixed with CVE-2011-1161 long ago, but apparently
a correct version of that patch never made it into the kernel.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The TPM can choose one of two ways to react to the TPM2_SelfTest command.
It can either run all self tests synchronously and then return RC_SUCCESS
once all tests were successful. Or it can choose to run the tests
asynchronously and return RC_TESTING immediately while the self tests still
execute in the background.
The previous implementation apparently was not aware of those possibilities
and attributed RC_TESTING to some prototype chips instead. With this change
the return code of TPM2_SelfTest is interpreted correctly, i.e. the self
test result is polled if and only if RC_TESTING is received.
Unfortunately, the polling cannot be done in the most straightforward way.
If RC_TESTING is received, ideally the code should now poll the
selfTestDone bit in the STS register, as this avoids sending more commands,
that might interrupt self tests executing in the background and thus
prevent them from ever completing. But it cannot be guaranteed that this
bit is correctly implemented for all devices, so the next best thing would
be to use TPM2_GetTestResult to query the test result. But the response to
that command can be very long, and the code currently lacks the
capabilities for efficient unmarshalling, so it is difficult to execute
this command.
Therefore, we simply run the TPM2_SelfTest command in a loop, which should
complete eventually, since we only request the execution of self tests that
have not yet been done.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In order to avoid delaying the code longer than necessary while still
giving the TPM enough time to execute the self tests asynchronously, start
with a small delay between two polls and increase it each round.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
tpm2_do_selftest is only used during initialization of the TPM to ensure
that the device functions correctly. Therefore, it is sufficient to request
only missing self tests (parameter full_test=0), not a reexecution of all
self tests, as was done before. This allows for a faster execution of this
command.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The buffers used as tx_buf/rx_buf in a SPI transfer need to be DMA-safe.
This cannot be guaranteed for the buffers passed to tpm_tis_spi_read_bytes
and tpm_tis_spi_write_bytes. Therefore, we need to use our own DMA-safe
buffer and copy the data to/from it.
The buffer needs to be allocated separately, to ensure that it is
cacheline-aligned and not shared with other data, so that DMA can work
correctly.
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch gets rid of dealing with intermediate flag for start method
and use start method value from ACPI table directly.
For ARM64, the locality is handled by Trust Zone in FW. The layout
does not have crb_regs_head. It is hitting the following line.
dev_warn(dev, FW_BUG "Bad ACPI memory layout");
Current code excludes CRB_FL_ACPI_START for this check. Now since
ARM64 support for TPM CRB is added, CRB_FL_CRB_SMC_START should also be
excluded from this check.
For goIdle and cmdReady where code was excluding CRB_FL_ACPI_START only
(do nothing for ACPI start method), CRB_FL_CRB_SMC_START was also
excluded as ARM64 SMC start method does not have TPM_CRB_CTRL_REQ.
However with special PPT workaround requiring CRB_FL_CRB_START to be
set in addition to CRB_FL_ACPI_START and the addition flag of SMC
start method CRB_FL_CRB_SMC_START, the code has become difficult to
maintain and undrestand. It is better to make code deal with start
method value from ACPI table directly.
Signed-off-by: Jiandi An <anjiandi@codeaurora.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Making cmd_getticks 'const' introduced a couple of harmless warnings:
drivers/char/tpm/tpm_tis_core.c: In function 'probe_itpm':
drivers/char/tpm/tpm_tis_core.c:469:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
rc = tpm_tis_send_data(chip, cmd_getticks, len);
drivers/char/tpm/tpm_tis_core.c:477:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
rc = tpm_tis_send_data(chip, cmd_getticks, len);
drivers/char/tpm/tpm_tis_core.c:255:12: note: expected 'u8 * {aka unsigned char *}' but argument is of type 'const u8 * {aka const unsigned char *}'
static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
This changes the related functions to all take 'const' pointers
so that gcc can see this as being correct. I had to slightly
modify the logic around tpm_tis_spi_transfer() for this to work
without introducing ugly casts.
Cc: stable@vger.kernel.org
Fixes: 5e35bd8e06b9 ("tpm_tis: make array cmd_getticks static const to shink object code size")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Don't populate array cmd_getticks on the stack, instead make it static
const. Makes the object code smaller by over 160 bytes:
Before:
text data bss dec hex filename
18813 3152 128 22093 564d drivers/char/tpm/tpm_tis_core.o
After:
text data bss dec hex filename
18554 3248 128 21930 55aa drivers/char/tpm/tpm_tis_core.o
Cc: stable@vger.kernel.org
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Migrated pubek_show to struct tpm_buf and cleaned up its implementation.
Previously the output parameter structure was declared but left
completely unused. Now it is used to refer different fields of the
output. We can move it to tpm-sysfs.c as it does not have any use
outside of that file.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZyEIXAAoJEHm+PkMAQRiGNYYH/0VsoYYN4WNYtfetKcHWT27G
FZYu/yr+MpybcHhB74eiYEGK2qwR6OV1l9H4WVfESrbnT84Dbb7QdDssD2YCD4Lw
oFMtr8qQmfHBxlRHIlk4UNSrcy+xketMNvuHjPklKqtrLutVQ4D9HR0yLOVKoxyR
hoxV6F6OnDCekhPjcBQZ+xDYuzTnF8fCqk1szvv4X2DBbffNX9Fvr9eVnS4bgML6
gfNiEplq4PiUXi3yPP2zRpdwRGDVpw8Wh++iroYgUFZ/LtVURI83GpeLyP0cs/W6
MygH+joQovOzkJ26MO8/SATdjvXn7NjBcjrDT61GrVhawJOkcnnQQvRpep3ih14=
=wrF8
-----END PGP SIGNATURE-----
Merge tag 'v4.14-rc2' into next-general
Linux 4.14-rc2
Sync to v4.14-rc2 for security subsystem developers to track.
Pull x86 fixes from Ingo Molnar:
"Another round of CR3/PCID related fixes (I think this addresses all
but one of the known problems with PCID support), an objtool fix plus
a Clang fix that (finally) solves all Clang quirks to build a bootable
x86 kernel as-is"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Fix inline asm call constraints for Clang
objtool: Handle another GCC stack pointer adjustment bug
x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs
x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier
x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code
x86/mm: Factor out CR3-building code
Pull irq fixes from Ingo Molnar:
"Three irqchip driver fixes, and an affinity mask helper function bug
fix affecting x86"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "genirq: Restrict effective affinity to interrupts actually using it"
irqchip.mips-gic: Fix shared interrupt mask writes
irqchip/gic-v4: Fix building with ancient gcc
irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()
Pull address-limit checking fixes from Ingo Molnar:
"This fixes a number of bugs in the address-limit (USER_DS) checks that
got introduced in the merge window, (mostly) affecting the ARM and
ARM64 platforms"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/syscalls: Move address limit check in loop
arm/syscalls: Optimize address limit check
Revert "arm/syscalls: Check address limit on user-mode return"
syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_check
Pull misc security layer update from James Morris:
"This is the remaining 'general' change in the security tree for v4.14,
following the direct merging of SELinux (+ TOMOYO), AppArmor, and
seccomp.
That's everything now for the security tree except IMA, which will
follow shortly (I've been traveling for the past week with patchy
internet)"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: fix description of values returned by cap_inode_need_killpriv
Pull TPM updates from James Morris:
"Here are the TPM updates from Jarkko for v4.14, which I've placed in
their own branch (next-tpm). I ended up cherry-picking them as other
changes had been made in Jarkko's branch after he sent me his original
pull request.
I plan on maintaining a separate branch for TPM (and other security
subsystems) from now on.
From Jarkko: 'Not much this time except a few fixes'"
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm: ibmvtpm: simplify crq initialization and document crq format
tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers
Documentation: tpm: add powered-while-suspended binding documentation
tpm: tpm_crb: constify acpi_device_id.
tpm: vtpm: constify vio_device_id
The crq is passed in registers and is the same on BE and LE hosts.
However, current implementation allocates a structure on-stack to
represent the crq, initializes the members swapping them to BE, and
loads the structure swapping it from BE. This is pointless and causes
GCC warnings about ununitialized members. Get rid of the structure and
the warnings.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The patch simply replaces all msleep function calls with usleep_range calls
in the generic drivers.
Tested with an Infineon TPM 1.2, using the generic tpm-tis module, for a
thousand PCR extends, we see results going from 1m57s unpatched to 40s
with the new patch. We obtain similar results when using the original and
patched tpm_infineon driver, which is also part of the patch.
Similarly with a STM TPM 2.0, using the CRB driver, it takes about 20ms per
extend unpatched and around 7ms with the new patch.
Note that the PCR consistency is untouched with this patch, each TPM has
been tested with 10 million extends and the aggregated PCR value is
continuously verified to be correct.
As an extension of this work, this could potentially and easily be applied
to other vendor's drivers. Still, these changes are not included in the
proposed patch as they are untested.
Signed-off-by: Hamza Attak <hamza@hpe.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Add a new powered-while-suspended property to control the behavior of the
TPM suspend/resume.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
4198 608 0 4806 12c6 drivers/char/tpm/tpm_crb.o
File size After adding 'const':
text data bss dec hex filename
4262 520 0 4782 12ae drivers/char/tpm/tpm_crb.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
vio_device_id are not supposed to change at runtime. All functions
working with vio_device_id provided by <asm/vio.h> work with
const vio_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
