This is a real fix for problem of utime/stime values decreasing
described in the thread:
http://lkml.org/lkml/2009/11/3/522
Now cputime is accounted in the following way:
- {u,s}time in task_struct are increased every time when the thread
is interrupted by a tick (timer interrupt).
- When a thread exits, its {u,s}time are added to signal->{u,s}time,
after adjusted by task_times().
- When all threads in a thread_group exits, accumulated {u,s}time
(and also c{u,s}time) in signal struct are added to c{u,s}time
in signal struct of the group's parent.
So {u,s}time in task struct are "raw" tick count, while
{u,s}time and c{u,s}time in signal struct are "adjusted" values.
And accounted values are used by:
- task_times(), to get cputime of a thread:
This function returns adjusted values that originates from raw
{u,s}time and scaled by sum_exec_runtime that accounted by CFS.
- thread_group_cputime(), to get cputime of a thread group:
This function returns sum of all {u,s}time of living threads in
the group, plus {u,s}time in the signal struct that is sum of
adjusted cputimes of all exited threads belonged to the group.
The problem is the return value of thread_group_cputime(),
because it is mixed sum of "raw" value and "adjusted" value:
group's {u,s}time = foreach(thread){{u,s}time} + exited({u,s}time)
This misbehavior can break {u,s}time monotonicity.
Assume that if there is a thread that have raw values greater
than adjusted values (e.g. interrupted by 1000Hz ticks 50 times
but only runs 45ms) and if it exits, cputime will decrease (e.g.
-5ms).
To fix this, we could do:
group's {u,s}time = foreach(t){task_times(t)} + exited({u,s}time)
But task_times() contains hard divisions, so applying it for
every thread should be avoided.
This patch fixes the above problem in the following way:
- Modify thread's exit (= __exit_signal()) not to use task_times().
It means {u,s}time in signal struct accumulates raw values instead
of adjusted values. As the result it makes thread_group_cputime()
to return pure sum of "raw" values.
- Introduce a new function thread_group_times(*task, *utime, *stime)
that converts "raw" values of thread_group_cputime() to "adjusted"
values, in same calculation procedure as task_times().
- Modify group's exit (= wait_task_zombie()) to use this introduced
thread_group_times(). It make c{u,s}time in signal struct to
have adjusted values like before this patch.
- Replace some thread_group_cputime() by thread_group_times().
This replacements are only applied where conveys the "adjusted"
cputime to users, and where already uses task_times() near by it.
(i.e. sys_times(), getrusage(), and /proc/<PID>/stat.)
This patch have a positive side effect:
- Before this patch, if a group contains many short-life threads
(e.g. runs 0.9ms and not interrupted by ticks), the group's
cputime could be invisible since thread's cputime was accumulated
after adjusted: imagine adjustment function as adj(ticks, runtime),
{adj(0, 0.9) + adj(0, 0.9) + ....} = {0 + 0 + ....} = 0.
After this patch it will not happen because the adjustment is
applied after accumulated.
v2:
- remove if()s, put new variables into signal_struct.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
LKML-Reference: <4B162517.8040909@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Remove if({u,s}t)s because no one call it with NULL now.
- Use cputime_{add,sub}().
- Add ifndef-endif for prev_{u,s}time since they are used
only when !VIRT_CPU_ACCOUNTING.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
LKML-Reference: <4B1624C7.7040302@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Anton Blanchard wrote:
> We allocate and zero cpu_isolated_map after the isolcpus
> __setup option has run. This means cpu_isolated_map always
> ends up empty and if CPUMASK_OFFSTACK is enabled we write to a
> cpumask that hasn't been allocated.
I introduced this regression in 49557e6203 (sched: Fix
boot crash by zalloc()ing most of the cpu masks).
Use the bootmem allocator if they set isolcpus=, otherwise
allocate and zero like normal.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: peterz@infradead.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <200912021409.17013.rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Anton Blanchard <anton@samba.org>
498657a478 incorrectly assumed
that preempt wasn't disabled around context_switch() and thus
was fixing imaginary problem. It also broke KVM because it
depended on ->sched_in() to be called with irq enabled so that
it can do smp calls from there.
Revert the incorrect commit and add comment describing different
contexts under with the two callbacks are invoked.
Avi: spotted transposed in/out in the added comment.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Avi Kivity <avi@redhat.com>
Cc: peterz@infradead.org
Cc: efault@gmx.de
Cc: rusty@rustcorp.com.au
LKML-Reference: <1259726212-30259-2-git-send-email-tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use of msecs_to_jiffies() for nsecs_to_cputime() have some
problems:
- The type of msecs_to_jiffies()'s argument is unsigned int, so
it cannot convert msecs greater than UINT_MAX = about 49.7 days.
- msecs_to_jiffies() returns MAX_JIFFY_OFFSET if MSB of argument
is set, assuming that input was negative value. So it cannot
convert msecs greater than INT_MAX = about 24.8 days too.
This patch defines a new function nsecs_to_jiffies() that can
deal greater values, and that can deal all incoming values as
unsigned.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Amrico Wang <xiyou.wangcong@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <johnstul@linux.vnet.ibm.com>
LKML-Reference: <4B0E16E7.5070307@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now all task_{u,s}time() pairs are replaced by task_times().
And task_gtime() is too simple to be an inline function.
Cleanup them all.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
LKML-Reference: <4B0E16D1.70902@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Functions task_{u,s}time() are called in pair in almost all
cases. However task_stime() is implemented to call task_utime()
from its inside, so such paired calls run task_utime() twice.
It means we do heavy divisions (div_u64 + do_div) twice to get
utime and stime which can be obtained at same time by one set
of divisions.
This patch introduces a function task_times(*tsk, *utime,
*stime) to retrieve utime and stime at once in better, optimized
way.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
LKML-Reference: <4B0E16AE.906@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In commit v2.6.21-691-g39bc89f ("make SysRq-T show all tasks
again") the interface of show_state_filter() was changed: zero
valued 'state_filter' specifies "dump all tasks" (instead of -1).
However, the condition for calling debug_show_all_locks() ("show
locks if all tasks are dumped") was not updated accordingly.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Cc: peterz@infradead.org
LKML-Reference: <4b0d2fe4.0ab6660a.6437.3cfc@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Resolve the conflict between v2.6.32-rc7 where dn_def_dev_handler
gets a small bug fix and the sysctl tree where I am removing all
sysctl strategy routines.
Heiko reported a case where a timer interrupt managed to
reference a root_domain structure that was already freed by a
concurrent hot-un-plug operation.
Solve this like the regular sched_domain stuff is also
synchronized, by adding a synchronize_sched() stmt to the free
path, this ensures that a root_domain stays present for any
atomic section that could have observed it.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Gregory Haskins <ghaskins@novell.com>
Cc: Siddha Suresh B <suresh.b.siddha@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
LKML-Reference: <1258363873.26714.83.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In finish_task_switch(), fire_sched_in_preempt_notifiers() is
called after finish_lock_switch().
However, depending on architecture, preemption can be enabled after
finish_lock_switch() which breaks the semantics of preempt
notifiers.
So move it before finish_arch_switch(). This also makes the in-
notifiers symmetric to out- notifiers in terms of locking - now
both are called under rq lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Avi Kivity <avi@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4AFD2801.7020900@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Originally task_s/utime() were designed to return clock_t but
later changed to return cputime_t by following commit:
commit efe567fc82
Author: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Thu Aug 23 15:18:02 2007 +0200
It only changed the type of return value, but not the
implementation. As the result the granularity of task_s/utime()
is still that of clock_t, not that of cputime_t.
So using task_s/utime() in __exit_signal() makes values
accumulated to the signal struct to be rounded and coarse
grained.
This patch removes casts to clock_t in task_u/stime(), to keep
granularity of cputime_t over the calculation.
v2:
Use div_u64() to avoid error "undefined reference to `__udivdi3`"
on some 32bit systems.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: xiyou.wangcong@gmail.com
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
LKML-Reference: <4AFB9029.9000208@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
kthread_bind(), migrate_task() and sched_fork were missing
updates, and try_to_wake_up() was updating after having already
used the stale clock.
Aside from preventing potential latency hits, there' a side
benefit in that early boot printk time stamps become monotonic.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1258020464.6491.2.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <new-submission>
Now that sys_sysctl is a generic wrapper around /proc/sys .ctl_name
and .strategy members of sysctl tables are dead code. Remove them.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
From the code in rt_mutex_setprio(), it is evident that the
intention is that task's with a RT 'prio' value as a consequence
of receiving a PI boost also have their 'sched_class' field set
to '&rt_sched_class'.
However, Peter noticed that the code in __setscheduler() could
result in this intention being frustrated. Fix it.
Reported-by: Peter Williams <pwil3058@bigpond.net.au>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1257880321.4108.457.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 1b9508f, "Rate-limit newidle" has been confirmed to fix
the netperf UDP loopback regression reported by Alex Shi.
This is a cleanup and a fix:
- moved to a more out of the way spot
- fix to ensure that balancing doesn't try to balance
runqueues which haven't gone online yet, which can
mess up CPU enumeration during boot.
Reported-by: Alex Shi <alex.shi@intel.com>
Reported-by: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org> # .32.x: a1f84a3: sched: Check for an idle shared cache
Cc: <stable@kernel.org> # .32.x: 1b9508f: sched: Rate-limit newidle
Cc: <stable@kernel.org> # .32.x: fd21073: sched: Fix affinity logic
Cc: <stable@kernel.org> # .32.x
LKML-Reference: <1257821402.5648.17.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In 15934a3732,
field last_tick_seen is added to struct rq.
But it is unused now.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Guillaume Chazarain <guichaz@yahoo.fr>
LKML-Reference: <4AE6A513.6010100@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
root_task_group_empty is used only with FAIR_GROUP_SCHED
so if we use other scheduler options we get:
kernel/sched.c:314: warning: 'root_task_group_empty' defined but not used
So move CONFIG_FAIR_GROUP_SCHED up that it covers
root_task_group_empty().
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091026192414.GB5321@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix variable name in sched.c kernel-doc notation.
Fixes this DocBook warning:
Warning(kernel/sched.c:2008): No description found for parameter
'p' Warning(kernel/sched.c:2008): Excess function parameter 'k'
description in 'kthread_bind'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <4AF4B1BC.8020604@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix kthread_bind() by moving the body of kthread_bind() to sched.c
sched: Disable SD_PREFER_LOCAL at node level
sched: Fix boot crash by zalloc()ing most of the cpu masks
sched: Strengthen buddies and mitigate buddy induced latencies
Rate limit newidle to migration_cost. It's a win for all
stages of sysbench oltp tests.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently partition_sched_domains() takes a 'struct cpumask
*doms_new' which is a kmalloc'ed array of cpumask_t. You can't
have such an array if 'struct cpumask' is undefined, as we plan
for CONFIG_CPUMASK_OFFSTACK=y.
So, we make this an array of cpumask_var_t instead: this is the
same for the CONFIG_CPUMASK_OFFSTACK=n case, but requires
multiple allocations for the CONFIG_CPUMASK_OFFSTACK=y case.
Hence we add alloc_sched_domains() and free_sched_domains()
functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <200911031453.40668.rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
cpu_nr_migrations() is not used, remove it.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4AF12A66.6020609@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Eric Paris reported that commit
f685ceacab causes boot time
PREEMPT_DEBUG complaints.
[ 4.590699] BUG: using smp_processor_id() in preemptible [00000000] code: rmmod/1314
[ 4.593043] caller is task_hot+0x86/0xd0
Since kthread_bind() messes with scheduler internals, move the
body to sched.c, and lock the runqueue.
Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Tested-by: Eric Paris <eparis@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1256813310.7574.3.camel@marge.simson.net>
[ v2: fix !SMP build and clean up ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I got a boot crash when forcing cpumasks offstack on 32 bit,
because find_new_ilb() returned 3 on my UP system (nohz.cpu_mask
wasn't zeroed).
AFAICT the others need to be zeroed too: only
nohz.ilb_grp_nohz_mask is initialized before use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <200911022037.21282.rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
sched: move rq_weight data array out of .percpu
percpu: allow pcpu_alloc() to be called with IRQs off
This patch updates percpu related symbols under kernel/ and mm/ such
that percpu symbols are unique and don't clash with local symbols.
This serves two purposes of decreasing the possibility of global
percpu symbol collision and allowing dropping per_cpu__ prefix from
percpu symbols.
* kernel/lockdep.c: s/lock_stats/cpu_lock_stats/
* kernel/sched.c: s/init_rq_rt/init_rt_rq_var/ (any better idea?)
s/sched_group_cpus/sched_groups/
* kernel/softirq.c: s/ksoftirqd/run_ksoftirqd/a
* kernel/softlockup.c: s/(*)_timestamp/softlockup_\1_ts/
s/watchdog_task/softlockup_watchdog/
s/timestamp/ts/ for local variables
* kernel/time/timer_stats: s/lookup_lock/tstats_lookup_lock/
* mm/slab.c: s/reap_work/slab_reap_work/
s/reap_node/slab_reap_node/
* mm/vmstat.c: local variable changed to avoid collision with vmstat_work
Partly based on Rusty Russell's "alloc_percpu: rename percpu vars
which cause name clashes" patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: (slab/vmstat) Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
CPU time of a guest is always accounted in 'user' time
without concern for the nice value of its counterpart
process although the guest is scheduled under the nice
value.
This patch fixes the defect and accounts cpu time of
a niced guest in 'nice' time as same as a niced process.
And also the patch adds 'guest_nice' to cpuacct. The
value provides niced guest cpu time which is like 'nice'
to 'user'.
The original discussions can be found here:
http://www.mail-archive.com/kvm@vger.kernel.org/msg23982.htmlhttp://www.mail-archive.com/kvm@vger.kernel.org/msg23860.html
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Acked-by: Avi Kivity <avi@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1256314810-7897-1-git-send-email-ozaki.ryota@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch restores the effectiveness of LAST_BUDDY in preventing
pgsql+oltp from collapsing due to wakeup preemption. It also
switches LAST_BUDDY to exclusively do what it does best, namely
mitigate the effects of aggressive wakeup preemption, which
improves vmark throughput markedly, and restores mysql+oltp
scalability.
Since buddies are about scalability, enable them beginning at the
point where we begin expanding sched_latency, namely
sched_nr_latency. Previously, buddies were cleared aggressively,
which seriously reduced their effectiveness. Not clearing
aggressively however, produces a small drop in mysql+oltp
throughput immediately after peak, indicating that LAST_BUDDY is
actually doing some harm. This is right at the point where X on the
desktop in competition with another load wants low latency service.
Ergo, do not enable until we need to scale.
To mitigate latency induced by buddies, or by a task just missing
wakeup preemption, check latency at tick time.
Last hunk prevents buddies from stymieing BALANCE_NEWIDLE via
CACHE_HOT_BUDDY.
Supporting performance tests:
tip = v2.6.32-rc5-1497-ga525b32
tipx = NO_GENTLE_FAIR_SLEEPERS NEXT_BUDDY granularity knobs = 31 knobs + 31 buddies
tip+x = NO_GENTLE_FAIR_SLEEPERS granularity knobs = 31 knobs
(Three run averages except where noted.)
vmark:
------
tip 108466 messages per second
tip+ 125307 messages per second
tip+x 125335 messages per second
tipx 117781 messages per second
2.6.31.3 122729 messages per second
mysql+oltp:
-----------
clients 1 2 4 8 16 32 64 128 256
..........................................................................................
tip 9949.89 18690.20 34801.24 34460.04 32682.88 30765.97 28305.27 25059.64 19548.08
tip+ 10013.90 18526.84 34900.38 34420.14 33069.83 32083.40 30578.30 28010.71 25605.47
tipx 9698.71 18002.70 34477.56 33420.01 32634.30 31657.27 29932.67 26827.52 21487.18
2.6.31.3 8243.11 18784.20 34404.83 33148.38 31900.32 31161.90 29663.81 25995.94 18058.86
pgsql+oltp:
-----------
clients 1 2 4 8 16 32 64 128 256
..........................................................................................
tip 13686.37 26609.25 51934.28 51347.81 49479.51 45312.65 36691.91 26851.57 24145.35
tip+ (1x) 13907.85 27135.87 52951.98 52514.04 51742.52 50705.43 49947.97 48374.19 46227.94
tip+x 13906.78 27065.81 52951.19 52542.59 52176.11 51815.94 50838.90 49439.46 46891.00
tipx 13742.46 26769.81 52351.99 51891.73 51320.79 50938.98 50248.65 48908.70 46553.84
2.6.31.3 13815.35 26906.46 52683.34 52061.31 51937.10 51376.80 50474.28 49394.47 47003.25
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cciss: Add cciss_allow_hpsa module parameter
cciss: Fix multiple calls to pci_release_regions
blk-settings: fix function parameter kernel-doc notation
writeback: kill space in debugfs item name
writeback: account IO throttling wait as iowait
elv_iosched_store(): fix strstrip() misuse
cfq-iosched: avoid probable slice overrun when idling
cfq-iosched: apply bool value where we return 0/1
cfq-iosched: fix think time allowed for seekers
cfq-iosched: fix the slice residual sign
cfq-iosched: abstract out the 'may this cfqq dispatch' logic
block: use proper BLK_RW_ASYNC in blk_queue_start_tag()
block: Seperate read and write statistics of in_flight requests v2
block: get rid of kblock_schedule_delayed_work()
cfq-iosched: fix possible problem with jiffies wraparound
cfq-iosched: fix issue with rq-rq merging and fifo list ordering
The following htmldocs warnings:
Warning(kernel/sched.c:685): No description found for parameter 'cpu'
Warning(kernel/sched.c:3676): No description found for parameter 'sd'
Trigger because new parameters were added to update_rq_clock() and
update_group_power() without updating the kernel-doc notation.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4AD29070.7070002@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In try_to_wake_up(), we update the runqueue clock, but
select_task_rq() may select a different runqueue than the one we
updated, leaving the new runqueue's clock stale for a bit.
This patch cures occasional huge latencies reported by latencytop
when coming out of idle on a mostly idle NO_HZ box.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1255070103.7639.30.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It makes sense to do IOWAIT when someone is blocked
due to IO throttle, as suggested by Kame and Peter.
There is an old comment for not doing IOWAIT on throttle,
however it has been mismatching the code for a long time.
If we stop accounting IOWAIT for 2.6.32, it could be an
undesirable behavior change. So restore the io_schedule.
CC: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Remove the comment about calling alloc_bootmem() as it is not
called here since commit 36b7b6d465.
Signed-off-by: Jayson R. King <dev@jaysonking.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <trivial@kernel.org>
LKML-Reference: <4AC9C8A6.6010209@jaysonking.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
normal_prio should be updated if policy changes from RT to
SCHED_MORMAL or if static_prio/nice is changed.
Some paths through sched_fork() ignore this requirement and may
result in normal_prio having an invalid value.
Fixing this issue allows the call to effective_prio() in
wake_up_new_task() to be removed.
Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <f8f46736fd4e7f090ac0.1253774830@mudlark.pw.nest>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's unused.
It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.
It _was_ used in two places at arch/frv for some reason.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alter the ss->can_attach and ss->attach functions to be able to deal with
a whole threadgroup at a time, for use in cgroup_attach_proc. (This is a
pre-patch to cgroup-procs-writable.patch.)
Currently, new mode of the attach function can only tell the subsystem
about the old cgroup of the threadgroup leader. No subsystem currently
needs that information for each thread that's being moved, but if one were
to be added (for example, one that counts tasks within a group) this bit
would need to be reworked a bit to tell the subsystem the right
information.
[hidave.darkstar@gmail.com: fix build]
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the menu idle governor which balances power savings, energy efficiency
and performance impact.
The reason for a reworked governor is that there have been serious
performance issues reported with the existing code on Nehalem server
systems.
To show this I'm sure Andrew wants to see benchmark results:
(benchmark is "fio", "no cstates" is using "idle=poll")
no cstates current linux new algorithm
1 disk 107 Mb/s 85 Mb/s 105 Mb/s
2 disks 215 Mb/s 123 Mb/s 209 Mb/s
12 disks 590 Mb/s 320 Mb/s 585 Mb/s
In various power benchmark measurements, no degredation was found by our
measurement&diagnostics team. Obviously a small percentage more power was
used in the "fio" benchmark, due to the much higher performance.
While it would be a novel idea to describe the new algorithm in this
commit message, I cheaped out and described it in comments in the code
instead.
[changes since first post: spelling fixes from akpm, review feedback,
folded menu-tng into menu.c]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'perfcounters-rename-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Tidy up after the big rename
perf: Do the big rename: Performance Counters -> Performance Events
perf_counter: Rename 'event' to event_id/hw_event
perf_counter: Rename list_entry -> group_entry, counter_list -> group_list
Manually resolved some fairly trivial conflicts with the tracing tree in
include/trace/ftrace.h and kernel/trace/trace_syscalls.c.
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By removing the need for it to know details of scheduling classes.
This allows PlugSched to define orthogonal scheduling classes.
Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <06d1b89ee15a0eef82d7.1253496713@mudlark.pw.nest>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If CONFIG_CPUMASK_OFFSTACK is enabled but doms_cur alloc failed in
arch_init_sched_domains(), doms_cur will move back to
fallback_doms. But this time, fallback_doms has not been
initialized yet.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: a.p.zijlstra@chello.nl
LKML-Reference: <1252930816-7672-1-git-send-email-yong.zhang0@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
runqueue_is_locked() is unavoidably racy due to a poor interface design.
It does
cpu = get_cpu()
ret = some_perpcu_thing(cpu);
put_cpu(cpu);
return ret;
Its return value is unreliable.
Fix.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <200909191855.n8JItiko022148@imap1.linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
sched: Fix SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL vs SD_WAKE_AFFINE
sched: Stop buddies from hogging the system
sched: Add new wakeup preemption mode: WAKEUP_RUNNING
sched: Fix TASK_WAKING & loadaverage breakage
sched: Disable wakeup balancing
sched: Rename flags to wake_flags
sched: Clean up the load_idx selection in select_task_rq_fair
sched: Optimize cgroup vs wakeup a bit
sched: x86: Name old_perf in a unique way
sched: Implement a gentler fair-sleepers feature
sched: Add SD_PREFER_LOCAL
sched: Add a few SYNC hint knobs to play with
sched: Fix sync wakeups again
sched: Add WF_FORK
sched: Rename sync arguments
sched: Rename select_task_rq() argument
sched: Feature to disable APERF/MPERF cpu_power
x86: sched: Provide arch implementations using aperf/mperf
x86: Add generic aperf/mperf code
x86: Move APERF/MPERF into a X86_FEATURE
...
Fix up trivial conflict in arch/x86/include/asm/processor.h due to
nearby addition of amd_get_nb_id() declaration from the EDAC merge.
Create a new wakeup preemption mode, preempt towards tasks that run
shorter on avg. It sets next buddy to be sure we actually run the task
we preempted for.
Test results:
root@twins:~# while :; do :; done &
[1] 6537
root@twins:~# while :; do :; done &
[2] 6538
root@twins:~# while :; do :; done &
[3] 6539
root@twins:~# while :; do :; done &
[4] 6540
root@twins:/home/peter# ./latt -c4 sleep 4
Entries: 48 (clients=4)
Averages:
------------------------------
Max 4750 usec
Avg 497 usec
Stdev 737 usec
root@twins:/home/peter# echo WAKEUP_RUNNING > /debug/sched_features
root@twins:/home/peter# ./latt -c4 sleep 4
Entries: 48 (clients=4)
Averages:
------------------------------
Max 14 usec
Avg 5 usec
Stdev 3 usec
Disabled by default - needs more testing.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <new-submission>
Fix this:
top - 21:54:00 up 2:59, 1 user, load average: 432512.33, 426421.74, 417432.74
Which happens because we now set TASK_WAKING before activate_task().
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We don't need to call update_shares() for each domain we iterate,
just got the largets one.
However, we should call it before wake_affine() as well, so that
that can use up-to-date values too.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The sync argument rename to introduce WF_* broke stuff by missing a
local alias for an argument in __wake_up_common, fix it by using
the more descriptive wake_flags name.
This restores WF_SYNC propagation, which fixes wake_affine()
behaviour, which fixes pipe-test.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
powerpc64: convert to dynamic percpu allocator
sparc64: use embedding percpu first chunk allocator
percpu: kill lpage first chunk allocator
x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
percpu: update embedding first chunk allocator to handle sparse units
percpu: use group information to allocate vmap areas sparsely
vmalloc: implement pcpu_get_vm_areas()
vmalloc: separate out insert_vmalloc_vm()
percpu: add chunk->base_addr
percpu: add pcpu_unit_offsets[]
percpu: introduce pcpu_alloc_info and pcpu_group_info
percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
percpu: add @align to pcpu_fc_alloc_fn_t
percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
percpu: drop @static_size from first chunk allocators
percpu: generalize first chunk allocator selection
percpu: build first chunk allocators selectively
percpu: rename 4k first chunk allocator to page
percpu: improve boot messages
percpu: fix pcpu_reclaim() locking
...
Fix trivial conflict as by Tejun Heo in kernel/sched.c
Avoid the cache buddies from biasing the time distribution away
from fork()ers. Normally the next buddy will be the preferred
scheduling target, but this makes fork()s prefer to run the new
child, whereas we prefer to run the parent, since that will
generate more work.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In order to extend the functions to have more than 1 flag (sync),
rename the argument to flags, and explicitly define a WF_ space for
individual flags.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I suspect a feed-back loop between cpuidle and the aperf/mperf
cpu_power bits, where when we have idle C-states lower the ratio,
which leads to lower cpu_power and then less load, which generates
more idle time, etc..
Put in a knob to disable it.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide an ach specific hook for cpufreq based scaling of
cpu_power.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
[ego@in.ibm.com: spotting bugs]
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
One of the problems of power-saving balancing is that under certain
scenarios it is too slow and allows tons of real work to pile up.
Avoid this by ignoring the powersave stuff when there's real work
to be done.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The problem with wake_idle() is that is doesn't respect things like
cpu_power, which means it doesn't deal well with SMT nor the recent
RT interaction.
To cure this, it needs to do what sched_balance_self() does, which
leads to the possibility of merging select_task_rq_fair() and
sched_balance_self().
Modify sched_balance_self() to:
- update_shares() when walking up the domain tree,
(it only called it for the top domain, but it should
have done this anyway), which allows us to remove
this ugly bit from try_to_wake_up().
- do wake_affine() on the smallest domain that contains
both this (the waking) and the prev (the wakee) cpu for
WAKE invocations.
Then use the top-down balance steps it had to replace wake_idle().
This leads to the dissapearance of SD_WAKE_BALANCE and
SD_WAKE_IDLE_FAR, with SD_WAKE_IDLE replaced with SD_BALANCE_WAKE.
SD_WAKE_AFFINE needs SD_BALANCE_WAKE to be effective.
Touch all topology bits to replace the old with new SD flags --
platforms might need re-tuning, enabling SD_BALANCE_WAKE
conditionally on a NUMA distance seems like a good additional
feature, magny-core and small nehalem systems would want this
enabled, systems with slow interconnects would not.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We're going to want to drop rq->lock in try_to_wake_up() for a
longer period of time, however we also want to deal with concurrent
waking of the same task, which is currently handled by holding
rq->lock.
So introduce a new TASK state, namely TASK_WAKING, which indicates
someone is already waking the task (other wakers will fail p->state
& state).
We also keep preemption disabled over the whole ttwu().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rather ugly patch to fully place the sched_balance_self() code
inside the fair class.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move the sched_balance_self() code into sched_fair.c
This facilitates the merger of sched_balance_self() and
sched_fair::select_task_rq().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In preparation to other code movement, move weighted_cpuload(),
source_load() and target_load() before the class includes.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (64 commits)
sched: Fix sched::sched_stat_wait tracepoint field
sched: Disable NEW_FAIR_SLEEPERS for now
sched: Keep kthreads at default priority
sched: Re-tune the scheduler latency defaults to decrease worst-case latencies
sched: Turn off child_runs_first
sched: Ensure that a child can't gain time over it's parent after fork()
sched: enable SD_WAKE_IDLE
sched: Deal with low-load in wake_affine()
sched: Remove short cut from select_task_rq_fair()
sched: Turn on SD_BALANCE_NEWIDLE
sched: Clean up topology.h
sched: Fix dynamic power-balancing crash
sched: Remove reciprocal for cpu_power
sched: Try to deal with low capacity, fix update_sd_power_savings_stats()
sched: Try to deal with low capacity
sched: Scale down cpu_power due to RT tasks
sched: Implement dynamic cpu_power
sched: Add smt_gain
sched: Update the cpu_power sum during load-balance
sched: Add SD_PREFER_SIBLING
...
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits)
rcu: Move end of special early-boot RCU operation earlier
rcu: Changes from reviews: avoid casts, fix/add warnings, improve comments
rcu: Create rcutree plugins to handle hotplug CPU for multi-level trees
rcu: Remove lockdep annotations from RCU's _notrace() API members
rcu: Add #ifdef to suppress __rcu_offline_cpu() warning in !HOTPLUG_CPU builds
rcu: Add CPU-offline processing for single-node configurations
rcu: Add "notrace" to RCU function headers used by ftrace
rcu: Remove CONFIG_PREEMPT_RCU
rcu: Merge preemptable-RCU functionality into hierarchical RCU
rcu: Simplify rcu_pending()/rcu_check_callbacks() API
rcu: Use debugfs_remove_recursive() simplify code.
rcu: Merge per-RCU-flavor initialization into pre-existing macro
rcu: Fix online/offline indication for rcudata.csv trace file
rcu: Consolidate sparse and lockdep declarations in include/linux/rcupdate.h
rcu: Renamings to increase RCU clarity
rcu: Move private definitions from include/linux/rcutree.h to kernel/rcutree.h
rcu: Expunge lingering references to CONFIG_CLASSIC_RCU, optimize on !SMP
rcu: Delay rcu_barrier() wait until beginning of next CPU-hotunplug operation.
rcu: Fix typo in rcu_irq_exit() comment header
rcu: Make rcupreempt_trace.c look at offline CPUs
...
This crash:
[ 1774.088275] divide error: 0000 [#1] SMP
[ 1774.100355] CPU 13
[ 1774.102498] Modules linked in:
[ 1774.105631] Pid: 30881, comm: hackbench Not tainted 2.6.31-rc8-tip-01308-g484d664-dirty #1629 X8DTN
[ 1774.114807] RIP: 0010:[<ffffffff81041c38>] [<ffffffff81041c38>]
sched_balance_self+0x19b/0x2d4
Triggers because update_group_power() modifies the sd tree and does
temporary calculations there - not considering that other CPUs
could observe intermediate values, such as the zero initial value.
Calculate it in a temporary variable instead. (we need no memory
barrier as these are all statistical values anyway)
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090904092742.GA11014@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Its a source of fail, also, now that cpu_power is dynamical,
its a waste of time.
before:
<idle>-0 [000] 132.877936: find_busiest_group: avg_load: 0 group_load: 8241 power: 1
after:
bash-1689 [001] 137.862151: find_busiest_group: avg_load: 10636288 group_load: 10387 power: 1
[ v2: build fix from From: Andreas Herrmann ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083826.425896304@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
sgs.group_capacity can now be 0, if for some reason
group->__cpu_power happens to be less than SCHED_LOAD_SCALE/2.
In that case, we need the following fix to make it work for
update_sd_power_savings_stats(). That's because both
sum_nr_running and group_capacity are unsigned longs.
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When the capacity drops low, we want to migrate load away.
Allow the load-balancer to remove all tasks when we hit rock
bottom.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083826.342231003@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Keep an average on the amount of time spend on RT tasks and use
that fraction to scale down the cpu_power for regular tasks.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083826.287778431@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Recompute the cpu_power for each cpu during load-balance.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083826.162033479@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The idea is that multi-threading a core yields more work
capacity than a single thread, provide a way to express a
static gain for threads.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083826.073345955@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In order to prepare for a more dynamic cpu_power, update the
group sum while walking the sched domains during load-balance.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083825.985050292@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Do the placement thing using SD flags.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083825.897028974@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
cpu_power is supposed to be a representation of the process
capacity of the cpu, not a value to randomly tweak in order to
affect placement.
Remove the placement hacks.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083825.810860576@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For counting how long an application has been waiting for
(disk) IO, there currently is only the HZ sample driven
information available, while for all other counters in this
class, a high resolution version is available via
CONFIG_SCHEDSTATS.
In order to make an improved bootchart tool possible, we also
need a higher resolution version of the iowait time.
This patch below adds this scheduler statistic to the kernel.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4A64B813.1080506@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
... so that it does not share a common name with a function
within the same scope.
Signed-off-by: Anirban Sinha <asinha@zeugmasystems.com>
LKML-Reference: <DDFD17CC94A9BD49A82147DDF7D545C501EA98A6@exchange.ZeugmaSystems.local>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When re-computing the shares for each task group's cpu
representation we need the ratio of weight on each cpu vs the
total weight of the sched domain.
Since load-balancing is loosely (read not) synchronized, the
weight of individual cpus can change between doing the sum and
calculating the ratio.
The previous patch dealt with only one of the race scenarios,
this patch side steps them all by saving a snapshot of all the
individual cpu weights, thereby always working on a consistent
set.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: torvalds@linux-foundation.org
Cc: jes@sgi.com
Cc: jens.axboe@oracle.com
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1251371336.18584.77.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Patch a5004278f0 (sched: Fix
cgroup smp fairness) introduced the possibility of a
divide-by-zero because load-balancing is not synchronized
between sched_domains.
This can cause the state of cpus to change between the first
and second loop over the sched domain in tg_shares_up().
Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jes Sorensen <jes@sgi.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1250855934.7538.30.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace for loop with the macro for_each_class to cleanup.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
LKML-Reference: <4A8A277D.4090304@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
... to further strip down __build_sched_domains().
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090818110111.GL29515@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For the sake of completeness.
Now all calls to init_sched_build_groups() are contained in
build_sched_groups().
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090818110013.GK29515@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
... to further strip down __build_sched_domains().
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090818105928.GJ29515@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
... to further strip down __build_sched_domains().
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090818105838.GI29515@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
... to further strip down __build_sched_domains().
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090818105751.GH29515@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
... to further strip down __build_sched_domains().
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090818105703.GG29515@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
... to further strip down __build_sched_domains().
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090818105614.GF29515@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
... to further strip down __build_sched_domains().
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090818105455.GE29515@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
... to further strip down __build_sched_domains().
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090818105406.GD29515@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
