As part of adding same test for GRE tunnel with IPv6 underlay, missing
bytes for key were found.
mausezahn does not fill zeros between two colons, so send them
explicitly. For example, use "00:00:00:E9:" instead of ":E9:"
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of adding same test for GRE tunnel with IPv6 underlay, an
optional improvement was found - call ipip_payload_get from
ecn_payload_get, so do not duplicate the code which creates the payload.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of adding same test for GRE tunnel with IPv6 underlay, wrong
alignments were found, fix them.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 underlay support was added, add test to check that "decap_error" trap
is triggered under the right conditions and that devlink counters increase.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests that check IPv6-in-IPv6, IPv4-in-IPv6 and MTU change of GRE
tunnel. The tests use hierarchical model - the tunnel is bound to a device
in a different VRF.
These tests can be run with TC_FLAG=skip_sw, so then they will verify
that packets go through hardware as part of enacp and decap phases.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests that check IPv6-in-IPv6, IPv4-in-IPv6 and MTU change of GRE
tunnel. The tests use flat model - overlay and underlay share the same VRF.
These tests can be run with TC_FLAG=skip_sw, so then they will verify
that packets go through hardware as part of enacp and decap phases.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add function that checks that at least X packets hit the tc rule.
There are cases that it is not possible to catch only the interesting
packets, so then, it is possible to send many packets and verify that at
least this amount of packets hit the rule.
This function will be used in the next patch for general tc rule that
can be used to test both software and hardware.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add TC_FLAG value to tests topology.
This flag supposed to be skip_sw/skip_hw which means do not filter by
software/hardware.
This can be useful for adding tests to forwarding directory, and be able
to verify that packets go through the hardware.
When the flag is not set or set to 'skip_hw', tests can still be executed
with veth pairs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull Kselftest fixes from Shuah Khan:
"A fix to implicit declaration warns in drivers/dma-buf test"
* tag 'linux-kselftest-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: drivers/dma-buf: Fix implicit declaration warns
This patch adds support for testing the encap (ip6ip6) mode of IOAM.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
For this test we are exercising the VCAP ES0 block's ability to match on
a packet with a given VLAN ID, and push an ES0 TAG A with a VID derived
from VID_A_VAL plus the classified VLAN.
$eth3.200 is the generator port
$eth0 is the bridged DUT port that receives
$eth1 is the bridged DUT port that forwards and rewrites VID 200 to 300
on egress via VCAP ES0
$eth2 is the port that receives from the DUT port $eth1
Since the egress rewriting happens outside the bridging service, VID 300
does not need to be in the bridge VLAN table of $eth1.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There will be one more VLAN modification selftest added, this time for
egress. Rename the one that exists right now to be more specific.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looks like when I wrote the selftests I was using a network manager that
brought up the ports automatically. In order to not rely on that, let
the script open them up.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
bpf-next 2021-10-02
We've added 85 non-merge commits during the last 15 day(s) which contain
a total of 132 files changed, 13779 insertions(+), 6724 deletions(-).
The main changes are:
1) Massive update on test_bpf.ko coverage for JITs as preparatory work for
an upcoming MIPS eBPF JIT, from Johan Almbladh.
2) Add a batched interface for RX buffer allocation in AF_XDP buffer pool,
with driver support for i40e and ice from Magnus Karlsson.
3) Add legacy uprobe support to libbpf to complement recently merged legacy
kprobe support, from Andrii Nakryiko.
4) Add bpf_trace_vprintk() as variadic printk helper, from Dave Marchevsky.
5) Support saving the register state in verifier when spilling <8byte bounded
scalar to the stack, from Martin Lau.
6) Add libbpf opt-in for stricter BPF program section name handling as part
of libbpf 1.0 effort, from Andrii Nakryiko.
7) Add a document to help clarifying BPF licensing, from Alexei Starovoitov.
8) Fix skel_internal.h to propagate errno if the loader indicates an internal
error, from Kumar Kartikeya Dwivedi.
9) Fix build warnings with -Wcast-function-type so that the option can later
be enabled by default for the kernel, from Kees Cook.
10) Fix libbpf to ignore STT_SECTION symbols in legacy map definitions as it
otherwise errors out when encountering them, from Toke Høiland-Jørgensen.
11) Teach libbpf to recognize specialized maps (such as for perf RB) and
internally remove BTF type IDs when creating them, from Hengqi Chen.
12) Various fixes and improvements to BPF selftests.
====================
Link: https://lore.kernel.org/r/20211002001327.15169-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull more kvm fixes from Paolo Bonzini:
"Small x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Ensure all migrations are performed when test is affined
KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks
ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm
x86/kvmclock: Move this_cpu_pvti into kvmclock.h
selftests: KVM: Don't clobber XMM register when read
KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, netfilter and bpf.
Current release - regressions:
- bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
interrupt
- mdio: revert mechanical patches which broke handling of optional
resources
- dev_addr_list: prevent address duplication
Previous releases - regressions:
- sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
(NULL deref)
- Revert "mac80211: do not use low data rates for data frames with no
ack flag", fixing broadcast transmissions
- mac80211: fix use-after-free in CCMP/GCMP RX
- netfilter: include zone id in tuple hash again, minimize collisions
- netfilter: nf_tables: unlink table before deleting it (race -> UAF)
- netfilter: log: work around missing softdep backend module
- mptcp: don't return sockets in foreign netns
- sched: flower: protect fl_walk() with rcu (race -> UAF)
- ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup
- smsc95xx: fix stalled rx after link change
- enetc: fix the incorrect clearing of IF_MODE bits
- ipv4: fix rtnexthop len when RTA_FLOW is present
- dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
SKU
- e100: fix length calculation & buffer overrun in ethtool::get_regs
Previous releases - always broken:
- mac80211: fix using stale frag_tail skb pointer in A-MSDU tx
- mac80211: drop frames from invalid MAC address in ad-hoc mode
- af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
-> UAF)
- bpf, x86: Fix bpf mapping of atomic fetch implementation
- bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog
- netfilter: ip6_tables: zero-initialize fragment offset
- mhi: fix error path in mhi_net_newlink
- af_unix: return errno instead of NULL in unix_create1() when over
the fs.file-max limit
Misc:
- bpf: exempt CAP_BPF from checks against bpf_jit_limit
- netfilter: conntrack: make max chain length random, prevent
guessing buckets by attackers
- netfilter: nf_nat_masquerade: make async masq_inet6_event handling
generic, defer conntrack walk to work queue (prevent hogging RTNL
lock)"
* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
net: stmmac: fix EEE init issue when paired with EEE capable PHYs
net: dev_addr_list: handle first address in __hw_addr_add_ex
net: sched: flower: protect fl_walk() with rcu
net: introduce and use lock_sock_fast_nested()
net: phy: bcm7xxx: Fixed indirect MMD operations
net: hns3: disable firmware compatible features when uninstall PF
net: hns3: fix always enable rx vlan filter problem after selftest
net: hns3: PF enable promisc for VF when mac table is overflow
net: hns3: fix show wrong state when add existing uc mac address
net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
net: hns3: don't rollback when destroy mqprio fail
net: hns3: remove tc enable checking
net: hns3: do not allow call hns3_nic_net_open repeatedly
ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
net: bridge: mcast: Associate the seqcount with its protecting lock.
net: mdio-ipq4019: Fix the error for an optional regs resource
net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
net: mdio: mscc-miim: Fix the mdio controller
af_unix: Return errno instead of NULL in unix_create1().
...
There are several test cases in the bpf directory are still using
exit 0 when they need to be skipped. Use kselftest framework skip
code instead so it can help us to distinguish the return status.
Criterion to filter out what should be fixed in bpf directory:
grep -r "exit 0" -B1 | grep -i skip
This change might cause some false-positives if people are running
these test scripts directly and only checking their return codes,
which will change from 0 to 4. However I think the impact should be
small as most of our scripts here are already using this skip code.
And there will be no such issue if running them with the kselftest
framework.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210929051250.13831-1-po-hsu.lin@canonical.com
Rework the CPU selection in the migration worker to ensure the specified
number of migrations are performed when the test iteslf is affined to a
subset of CPUs. The existing logic skips iterations if the target CPU is
not in the original set of possible CPUs, which causes the test to fail
if too many iterations are skipped.
==== Test Assertion Failure ====
rseq_test.c:228: i > (NR_TASK_MIGRATIONS / 2)
pid=10127 tid=10127 errno=4 - Interrupted system call
1 0x00000000004018e5: main at rseq_test.c:227
2 0x00007fcc8fc66bf6: ?? ??:0
3 0x0000000000401959: _start at ??:?
Only performed 4 KVM_RUNs, task stalled too much?
Calculate the min/max possible CPUs as a cheap "best effort" to avoid
high runtimes when the test is affined to a small percentage of CPUs.
Alternatively, a list or xarray of the possible CPUs could be used, but
even in a horrendously inefficient setup, such optimizations are not
needed because the runtime is completely dominated by the cost of
migrating the task, and the absolute runtime is well under a minute in
even truly absurd setups, e.g. running on a subset of vCPUs in a VM that
is heavily overcommited (16 vCPUs per pCPU).
Fixes: 61e52f1630 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210929234112.1862848-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cleanup code uses while (cpu++ < cpu_cnt) for closing fds, which means
it starts iterating from 1 for closing fds. If the first fd is -1, it
skips over it and closes garbage fds (typically zero) in the remaining
array. This leads to test failures for future tests when they end up
storing fd 0 (as the slot becomes free due to close(0)) in ldimm64's BTF
fd, ending up trying to match module BTF id with vmlinux.
This was observed as spurious CI failure for the ksym_module_libbpf and
module_attach tests. The test ends up closing fd 0 and breaking libbpf's
assumption that module BTF fd will always be > 0, which leads to the
kernel thinking that we are pointing to a BTF ID in vmlinux BTF.
Fixes: 025bd7c753 (selftests/bpf: Add test for bpf_get_branch_snapshot)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-12-memxor@gmail.com
clang build kernel failed the selftest probe_user.
$ ./test_progs -t probe_user
$ ...
$ test_probe_user:PASS:get_kprobe_res 0 nsec
$ test_probe_user:FAIL:check_kprobe_res wrong kprobe res from probe read: 0.0.0.0:0
$ #94 probe_user:FAIL
The test attached to kernel function __sys_connect(). In net/socket.c, we have
int __sys_connect(int fd, struct sockaddr __user *uservaddr, int addrlen)
{
......
}
...
SYSCALL_DEFINE3(connect, int, fd, struct sockaddr __user *, uservaddr,
int, addrlen)
{
return __sys_connect(fd, uservaddr, addrlen);
}
The gcc compiler (8.5.0) does not inline __sys_connect() in syscall entry
function. But latest clang trunk did the inlining. So the bpf program
is not triggered.
To make the test more reliable, let us kprobe the syscall entry function
instead. Note that x86_64, arm64 and s390 have syscall wrappers and they have
to be handled specially.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210929033000.3711921-1-yhs@fb.com
Update "sk_lookup/" definition to be a stand-alone type specifier,
with backwards-compatible prefix match logic in non-libbpf-1.0 mode.
Currently in selftests all the "sk_lookup/<whatever>" uses just use
<whatever> for duplicated unique name encoding, which is redundant as
BPF program's name (C function name) uniquely and descriptively
identifies the intended use for such BPF programs.
With libbpf's SEC_DEF("sk_lookup") definition updated, switch existing
sk_lookup programs to use "unqualified" SEC("sk_lookup") section names,
with no random text after it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-11-andrii@kernel.org
Convert all SEC("classifier*") uses to a new and strict SEC("tc")
section name. In reference_tracking selftests switch from ambiguous
searching by program title (section name) to non-ambiguous searching by
name in some selftests, getting closer to completely removing
bpf_object__find_program_by_title().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-4-andrii@kernel.org
Convert almost all SEC("xdp_blah") uses to strict SEC("xdp") to comply
with strict libbpf 1.0 logic of exact section name match for XDP program
types. There is only one exception, which is only tested through
iproute2 and defines multiple XDP programs within the same BPF object.
Given iproute2 still works in non-strict libbpf mode and it doesn't have
means to specify XDP programs by its name (not section name/title),
leave that single file alone for now until iproute2 gains lookup by
function/program name.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-3-andrii@kernel.org
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-28
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).
The main changes are:
1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.
2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.
3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.
4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.
5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.
6) Fix return value handling for struct_ops BPF programs, from Hou Tao.
7) Various fixes to BPF selftests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
,
When building bpf selftest with make -j, I'm randomly getting build failures
such as this one:
In file included from progs/bpf_flow.c:19:
[...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
#include "bpf_helper_defs.h"
^~~~~~~~~~~~~~~~~~~
The file that fails the build varies between runs but it's always in the
progs/ subdir.
The reason is a missing make dependency on libbpf for the .o files in
progs/. There was a dependency before commit 3ac2e20fba but that commit
removed it to prevent unneeded rebuilds. However, that only works if libbpf
has been built already; the 'wildcard' prerequisite does not trigger when
there's no bpf_helper_defs.h generated yet.
Keep the libbpf as an order-only prerequisite to satisfy both goals. It is
always built before the progs/ objects but it does not trigger unnecessary
rebuilds by itself.
Fixes: 3ac2e20fba ("selftests/bpf: BPF object files should depend only on libbpf headers")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com
Change the interleaving of packets in unaligned mode. With the current
buffer addresses in the packet stream, the last buffer in the umem
could not be used as a large packet could potentially write over the
end of the umem. The kernel correctly threw this buffer address away
and refused to use it. This is perfectly fine for all regular packet
streams, but the ones used for unaligned mode have every other packet
being at some different offset. As we will add checks for correct
offsets in the next patch, this needs to be fixed. Just start these
page-boundary straddling buffers one page earlier so that the last
one is not on the last page of the umem, making all buffers valid.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-13-magnus.karlsson@gmail.com
Add a test where a single packet is sent and received. This might
sound like a silly test, but since many of the interfaces in xsk are
batched, it is important to be able to validate that we did not break
something as fundamental as just receiving single packets, instead of
batches of packets at high speed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-12-magnus.karlsson@gmail.com
Introduce pacing of traffic so that the Tx thread can never send more
packets than the receiver has processed plus the number of packets it
can have in its umem. So at any point in time, the number of in flight
packets (not processed by the Rx thread) are less than or equal to the
number of packets that can be held in the Rx thread's umem.
The batch size is also increased to improve running time.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-11-magnus.karlsson@gmail.com
Fix a problem where the fill ring was populated with too many
entries. If number of buffers in the umem was smaller than the fill
ring size, the code used to loop over from the beginning of the umem
and start putting the same buffers in again. This is racy indeed as a
later packet can be received overwriting an earlier one before the Rx
thread manages to validate it.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-9-magnus.karlsson@gmail.com
Pull kvm fixes from Paolo Bonzini:
"A bit late... I got sidetracked by back-from-vacation routines and
conferences. But most of these patches are already a few weeks old and
things look more calm on the mailing list than what this pull request
would suggest.
x86:
- missing TLB flush
- nested virtualization fixes for SMM (secure boot on nested
hypervisor) and other nested SVM fixes
- syscall fuzzing fixes
- live migration fix for AMD SEV
- mirror VMs now work for SEV-ES too
- fixes for reset
- possible out-of-bounds access in IOAPIC emulation
- fix enlightened VMCS on Windows 2022
ARM:
- Add missing FORCE target when building the EL2 object
- Fix a PMU probe regression on some platforms
Generic:
- KCSAN fixes
selftests:
- random fixes, mostly for clang compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
selftests: KVM: Explicitly use movq to read xmm registers
selftests: KVM: Call ucall_init when setting up in rseq_test
KVM: Remove tlbs_dirty
KVM: X86: Synchronize the shadow pagetable before link it
KVM: X86: Fix missed remote tlb flush in rmap_write_protect()
KVM: x86: nSVM: don't copy virt_ext from vmcb12
KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround
KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0
KVM: x86: nSVM: restore int_vector in svm_clear_vintr
kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[]
KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit
KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry
KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state
KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm
KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode
KVM: x86: reset pdptrs_from_userspace when exiting smm
KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit
KVM: nVMX: Filter out all unsupported controls when eVMCS was activated
KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs
KVM: Clean up benign vcpu->cpu data races when kicking vCPUs
...
udmabuf has the following implicit declaration warns:
udmabuf.c:30:10: warning: implicit declaration of function 'open';
udmabuf.c:42:8: warning: implicit declaration of function 'fcntl'
These are caused due to not including fcntl.h and including just
linux/fcntl.h. Fix it to include fcntl.h which will bring in the
linux/fcntl.h. In addition, define __EXPORTED_HEADERS__ to bring in
F_ADD_SEALS and F_SEAL_SHRINK defines and fix the following error
that show up when just fcntl.h is included.
udmabuf.c:45:21: error: 'F_ADD_SEALS' undeclared
45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK);
| ^~~~~~~~~~~
udmabuf.c:45:34: error: 'F_SEAL_SHRINK' undeclared
45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK);
| ^~~~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The purpose of this test is to verify that after a short activity passes,
the reported time is reasonable: not zero (which could be reported by
mistake), and not something outrageous (which would be indicative of an
issue in used units).
However, the idle time is reported in units of clock_t, or hundredths of
second. If the initial sequence of commands is very quick, it is possible
that the idle time is reported as just flat-out zero. When this test was
recently enabled in our nightly regression, we started seeing spurious
failures for exactly this reason.
Therefore buffer the delay leading up to the test with a sleep, to make
sure there is no legitimate way of reporting 0.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull Kselftest fixes from Shuah Khan:
- fix to Kselftest common framework header install to run before other
targets for it work correctly in parallel build case.
- fixes to kvm test to not ignore fscanf() returns which could result
in inconsistent test behavior and failures.
* tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: kvm: fix get_run_delay() ignoring fscanf() return warn
selftests: kvm: move get_run_delay() into lib/test_util
selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn
selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn
selftests: be sure to make khdr before other targets
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
1) ipset limits the max allocatable memory via kvmalloc() to MAX_INT,
from Jozsef Kadlecsik.
2) Check ip_vs_conn_tab_bits value to be in the range specified
in Kconfig, from Andrea Claudi.
3) Initialize fragment offset in ip6tables, from Jeremy Sowden.
4) Make conntrack hash chain length random, from Florian Westphal.
5) Add zone ID to conntrack and NAT hashtuple again, also from Florian.
6) Add selftests for bidirectional zone support and colliding tuples,
from Florian Westphal.
7) Unlink table before synchronize_rcu when cleaning tables with
owner, from Florian.
8) ipset limits the max allocatable memory via kvmalloc() to MAX_INT.
9) Release conntrack entries via workqueue in masquerade, from Florian.
10) Fix bogus net_init in iptables raw table definition, also from Florian.
11) Work around missing softdep in log extensions, from Florian Westphal.
12) Serialize hash resizes and cleanups with mutex, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: conntrack: serialize hash resizes and cleanups
netfilter: log: work around missing softdep backend module
netfilter: iptable_raw: drop bogus net_init annotation
netfilter: nf_nat_masquerade: defer conntrack walk to work queue
netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic
netfilter: nf_tables: Fix oversized kvmalloc() calls
netfilter: nf_tables: unlink table before deleting it
selftests: netfilter: add zone stress test with colliding tuples
selftests: netfilter: add selftest for directional zone support
netfilter: nat: include zone id in nat table hash again
netfilter: conntrack: include zone id in tuple hash again
netfilter: conntrack: make max chain length random
netfilter: ip6_tables: zero-initialize fragment offset
ipvs: check that ip_vs_conn_tab_bits is between 8 and 20
netfilter: ipset: Fix oversized kvmalloc() calls
====================
Link: https://lore.kernel.org/r/20210924221113.348767-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With clang build kernel (adding LLVM=1 to kernel and selftests/bpf build
command line), I hit the following test failure:
$ ./test_progs -t btf_dump
...
btf_dump_data:PASS:ensure expected/actual match 0 nsec
btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0
btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0
test_btf_dump_int_data:FAIL:dump __int128 unexpected error: -2 (errno 2)
#15/9 btf_dump/btf_dump: int_data:FAIL
Further analysis showed gcc build kernel has type "__int128" in dwarf/BTF
and it doesn't exist in clang build kernel. Code searching for kernel code
found the following:
arch/s390/include/asm/types.h: unsigned __int128 pair;
crypto/ecc.c: unsigned __int128 m = (unsigned __int128)left * right;
include/linux/math64.h: return (u64)(((unsigned __int128)a * mul) >> shift);
include/linux/math64.h: return (u64)(((unsigned __int128)a * mul) >> shift);
lib/ubsan.h:typedef __int128 s_max;
lib/ubsan.h:typedef unsigned __int128 u_max;
In my case, CONFIG_UBSAN is not enabled. Even if we only have "unsigned __int128"
in the code, somehow gcc still put "__int128" in dwarf while clang didn't.
Hence current test works fine for gcc but not for clang.
Enabling CONFIG_UBSAN is an option to provide __int128 type into dwarf
reliably for both gcc and clang, but not everybody enables CONFIG_UBSAN
in their kernel build. So the best choice is to use "unsigned __int128" type
which is available in both clang and gcc build kernels. But clang and gcc
dwarf encoded names for "unsigned __int128" are different:
[$ ~] cat t.c
unsigned __int128 a;
[$ ~] gcc -g -c t.c && llvm-dwarfdump t.o | grep __int128
DW_AT_type (0x00000031 "__int128 unsigned")
DW_AT_name ("__int128 unsigned")
[$ ~] clang -g -c t.c && llvm-dwarfdump t.o | grep __int128
DW_AT_type (0x00000033 "unsigned __int128")
DW_AT_name ("unsigned __int128")
The test change in this patch tries to test type name before
doing actual test.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20210924025856.2192476-1-yhs@fb.com
Pull arm64 fixes from Catalin Marinas:
- It turns out that the optimised string routines merged in 5.14 are
not safe with in-kernel MTE (KASAN_HW_TAGS) because of reading beyond
the end of a string (strcmp, strncmp). Such reading may go across a
16 byte tag granule and cause a tag check fault. When KASAN_HW_TAGS
is enabled, use the generic strcmp/strncmp C implementation.
- An errata workaround for ThunderX relied on the CPU capabilities
being enabled in a specific order. This disappeared with the
automatic generation of the cpucaps.h file (sorted alphabetically).
Fix it by checking the current CPU only rather than the system-wide
capability.
- Add system_supports_mte() checks on the kernel entry/exit path and
thread switching to avoid unnecessary barriers and function calls on
systems where MTE is not supported.
- kselftests: skip arm64 tests if the required features are missing.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Restore forced disabling of KPTI on ThunderX
kselftest/arm64: signal: Skip tests if required features are missing
arm64: Mitigate MTE issues with str{n}cmp()
arm64: add MTE supported check to thread switching and syscall entry/exit
Compiling the KVM selftests with clang emits the following warning:
>> include/x86_64/processor.h:297:25: error: variable 'xmm0' is uninitialized when used here [-Werror,-Wuninitialized]
>> return (unsigned long)xmm0;
where xmm0 is accessed via an uninitialized register variable.
Indeed, this is a misuse of register variables, which really should only
be used for specifying register constraints on variables passed to
inline assembly. Rather than attempting to read xmm registers via
register variables, just explicitly perform the movq from the desired
xmm register.
Fixes: 783e9e5126 ("kvm: selftests: add API testing infrastructure")
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210924005147.1122357-1-oupton@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While x86 does not require any additional setup to use the ucall
infrastructure, arm64 needs to set up the MMIO address used to signal a
ucall to userspace. rseq_test does not initialize the MMIO address,
resulting in the test spinning indefinitely.
Fix the issue by calling ucall_init() during setup.
Fixes: 61e52f1630 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210923220033.4172362-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
