Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual
Noralf needs this for his tinydrm pull request.
* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
drm/vc4: Remove vc4_debugfs_cleanup()
dma/fence: Export enable-signaling tracepoint for emission by drivers
drm/tilcdc: Remove tilcdc_debugfs_cleanup()
drm/tegra: Remove tegra_debugfs_cleanup()
drm/sti: Remove drm_debugfs_remove_files() calls
drm/radeon: Remove drm_debugfs_remove_files() call
drm/omap: Remove omap_debugfs_cleanup()
drm/hdlcd: Remove hdlcd_debugfs_cleanup()
drm/etnaviv: Remove etnaviv_debugfs_cleanup()
drm/etnaviv: allow build with COMPILE_TEST
drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
drm/prime: Clarify DMA-BUF/GEM Object lifetime
drm/ttm: Make sure BOs being swapped out are cacheable
drm/atomic: Remove drm_atomic_debugfs_cleanup()
drm: drm_minor_register(): Clean up debugfs on failure
drm: debugfs: Remove all files automatically on cleanup
drm/fourcc: add vivante tiled layout format modifiers
drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
drm/edid: Set AVI infoframe Q even when QS=0
drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
...
time instead of waiting for the connector status change.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JDc1
-----END PGP SIGNATURE-----
Merge tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux into drm-next
Contains a single patch to create the fbdev at driver's registration
time instead of waiting for the connector status change.
* tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux:
drm/atmel-hlcdc: Rework the fbdev creation logic
- Add missing selection of VIDEOMODE_HELPERS in Kconfig, since ZTE DRM
driver uses drm_display_mode_to_videomode().
- Enable HDMI audio support through SPDIF interface based on generic
hdmi-audio-codec driver.
- Enable VOU VL (Video Layer) to support overlay plane with scaling
function.
- Refine zx_vou driver a bit and then add TV Encoder output device
support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjX7tAAoJEFBXWFqHsHzOx7EH/3CQaLLsPk4r/9T/hZ8FAN1G
23jB2FysAdVWdX0qmBalOh8/3TstZMmXKM1yOxVXGf/c9hLjIcImnIAocudD6CT9
87grM+S0O2zdsfGvwjCWc1ymsPxDvw8c2/PzdXAPe6gEsTxP3nqo/y3z0qfZz6jF
PuJANNEG98A3nKOcI6/T7U8LdPx5TbnYz/rhkW9azX4eWMzY85yspSoC0p1xV3Ij
h4fKhZT6/T1IyKM4FkDFjU6V0DLytdKd1l2Z9Wm+Y/j0K/9DYHiVP0FMeXml9UDZ
YY3KHW3wCjyc4S8PffLL4wjDaq62Z0pvN2VAcEsKffwKb+FZBRSIMyxwznQs9pM=
=ZRH4
-----END PGP SIGNATURE-----
Merge tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into drm-next
ZTE DRM driver updates for 4.11:
- Add missing selection of VIDEOMODE_HELPERS in Kconfig, since ZTE DRM
driver uses drm_display_mode_to_videomode().
- Enable HDMI audio support through SPDIF interface based on generic
hdmi-audio-codec driver.
- Enable VOU VL (Video Layer) to support overlay plane with scaling
function.
- Refine zx_vou driver a bit and then add TV Encoder output device
support.
[airlied: fixup plane format change]
* tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
drm: zte: add tvenc driver support
dt: add bindings for ZTE tvenc device
drm: zte: add function to configure vou_ctrl dividers
drm: zte: move struct vou_inf into zx_vou driver
drm: zte: add interlace mode support
drm: zte: add overlay plane support
drm: zte: add .atomic_disable hook to disable graphic layer
drm: zte: make zx_plane accessible from zx_vou driver
drm: zte: support hdmi audio through spdif
drm: zte: select VIDEOMODE_HELPERS in Kconfig
Updated pull request after I pulled first time :)
* 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view
Hope I'm not too late before the cutoff for the v4.11 with these patches.
Mostly an asorted set of fixes that we have discovered while playing with
the code and preparing for the next set of features.
* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
drm: mali-dp: fix stride setting for multi-plane formats
drm: mali-dp: Add plane offset to the plane's physical start address register
drm: mali-dp: Check for sufficient address space
drm: mali-dp: Check hw version matches device-tree
drm: mali-dp: Rename malidp_input_format to malidp_pixel_format
drm: mali-dp: fix Lx_CONTROL register fields clobber
drm: mali-dp: Fix transposed horizontal/vertical flip
drm: mali-dp: Fix destination size handling when rotating
drm: mali-dp: Don't force source size == crtc size
drm: mali-dp: Check more use cases in the plane's ->atomic_check()
drm: malidp: Remove event_list member from struct malidp_drm
drm/arm/malidp: Fix possible dereference of NULL
Now that we wait for DRM panels to be available before registering the
DRM device (returning -EPROBE_DEFER if the panel has not been probed
yet), we no longer need to put the fbdev creation code in
->output_poll_changed().
This removes the 10 secs delay between DRM dev registration and fbdev
creation (polling period = 10 seconds).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Alex Vazquez <avazquez.dev@gmail.com>
It adds the TV Encoder driver to support video output in PAL and NTSC
format. The driver uses syscon/regmap interface to configure register
bit sitting in SYSCTRL module for DAC power control.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
The clock control module (CRM) cannot always provide desired frequency
for all VOU output devices. That's why VOU integrates a few dividers
to further divide the clocks from CRM. Let's add an interface for
configuring these dividers.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Although data in struct vou_inf is defined per output device, it doesn't
belong to the device itself but VOU control module. All these data can
just be defined in VOU driver, and output device driver only needs to
invoke VOU driver function with device ID to enable/disable specific
output device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
It adds interlace mode support in VOU TIMING_CTRL and channel control
block, so that VOU driver gets ready to support output device in
interlace mode like TV Encoder.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
It enables VOU VL (Video Layer) to support overlay plane with scaling
function. VL0 has some quirks on scaling support. We choose to skip it
and only adds VL1 and VL2 into DRM core for now.
Function zx_plane_atomic_disable() gets moved around with no changes to
save a forward declaration.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
There are a few hardware bits for each graphic layer to control main/aux
channel and clock selection, as well as the layer enabling. These bits
sit outside the layer block itself, but in VOU control glue block. We
currently set these bits up at CRTC initialization for once, and do not
support disabling the layer.
This patch creates a pair of functions zx_vou_layer_enable[disable] to
be invoked from plane hooks .atomic_update and .atomic_disable to set up
and tear down the layer. This is generic for both graphic and video
layers, so it will make the overlay plane support to be added later much
easier.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Move struct zx_plane from zx_plane.c to zx_plane.h, so that it can be
accessed from zx_vou driver, and we can save the use of struct
zx_layer_data completely. More importantly, those additional data used
by VOU controller to enable/disable graphic and video layers can later
be added and accessed much more easily from zx_vou driver.
While at it, we make two changes to zx_plane_init() interface:
- Encode struct device pointer in zx_plane, so that we do not need to
pass it as a parameter.
- Change return of zx_plane_init() from struct drm_plane pointer to
error code, since we can get the pointer from zx_plane in zx_vou
driver now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
It enables HDMI audio support through SPDIF interface based on generic
hdmi-audio-codec driver. The HDMI hardware supports more audio
interfaces than SPDIF, like I2S, which may be added later.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
ZTE DRM driver uses drm_display_mode_to_videomode() in function
zx_crtc_enable(). Select VIDEOMODE_HELPERS in Kconfig to fix the
following link error.
LD vmlinux.o
MODPOST vmlinux.o
drivers/built-in.o: In function `zx_crtc_enable':
:(.text+0xbdeb8): undefined reference to `drm_display_mode_to_videomode'
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Currently this tracepoint is solely used by dma_fence_enable_sw_signaling,
however I have a need to manually perform the hw enabling of the
signaling and would like to emit this tracepoint for completeness.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124115758.31353-1-chris@chris-wilson.co.uk
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed. Also remove the unused tilcdc_module_ops.debugfs_cleanup()
callback. drm_debugfs_cleanup() removes all debugfs files using
debugfs_remove_recursive(), so there should be no need for such a
callback in the future.
Cc: jsarha@ti.com
Cc: tomi.valkeinen@ti.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-16-noralf@tronnes.org
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so it's not necessary to call
drm_debugfs_remove_files(). Additionally it uses
debugfs_remove_recursive() to clean up the debugfs files, so no need
for adding fake drm_info_node entries.
Cc: benjamin.gaignard@linaro.org
Cc: vincent.abriou@st.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Tested-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-14-noralf@tronnes.org
From the description of the "DMA-BUF/GEM Object references
and lifetime overview" it is not clear when exactly
dma_buf gets destroyed and memory freed: only driver
.release function mentioned which makes confusion on the
real buffer's lifetime.
Add more description so all the paths are covered.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
[danvet: Minor spelling fixes, and some clarification of the 2nd
paragraph.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1485500665-27690-1-git-send-email-andr2000@gmail.com
The current caching state may not be tt_cached, even though the
placement contains TTM_PL_FLAG_CACHED, because placement can contain
multiple caching flags. Trying to swap out such a BO would trip up the
BUG_ON(ttm->caching_state != tt_cached);
in ttm_tt_swapout.
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Instead of having the drivers call drm_debugfs_remove_files() in
their drm_driver->debugfs_cleanup hook, do it automatically by
traversing minor->debugfs_list.
Also use debugfs_remove_recursive() so drivers who add their own
debugfs files don't have to keep track of them for removal.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-2-noralf@tronnes.org
Vivante GC hardware uses simple 4x4 tiled and nested 64x64 supertiled
formats as well as so-called split-tiled variants for dual-pipe
hardware, where even and odd tiles start at different base addresses.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126153217.26916-1-p.zabel@pengutronix.de
drivers/gpu/drm/sti/sti_plane.c:76:33: error: ‘struct drm_framebuffer’
has no member named ‘pixel_format’; did you mean ‘format’?
I didn't look to hard at the casting to a char * and just did a
mechanical transformation of s/pixel_format/format->format/ as given in
commit 438b74a549 ("drm: Nuke fb->pixel_format").
Fixes: 438b74a549 ("drm: Nuke fb->pixel_format")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- cleanups&fixes for dw-hdmi bride driver (Laurent)
- updates for adv bridge driver (John Stultz) for nexus
- drm_crtc_from_index helper rollout (Shawn Guo)
- removing drm_framebuffer_unregister_private from drivers&core
- target_vblank (Andrey Grodzovsky)
- misc tiny stuff
* tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits)
drm: qxl: Open code teardown function for qxl
drm: qxl: Open code probing sequence for qxl
drm/bridge: adv7511: Re-write the i2c address before EDID probing
drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection
drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
drm: vc4: use crtc helper drm_crtc_from_index()
drm: tegra: use crtc helper drm_crtc_from_index()
drm: nouveau: use crtc helper drm_crtc_from_index()
drm: mediatek: use crtc helper drm_crtc_from_index()
drm: kirin: use crtc helper drm_crtc_from_index()
drm: exynos: use crtc helper drm_crtc_from_index()
dt-bindings: display: dw-hdmi: Clean up DT bindings documentation
drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY
drm: bridge: dw-hdmi: Fix the name of the PHY reset macros
drm: bridge: dw-hdmi: Define and use macros for PHY register addresses
drm: bridge: dw-hdmi: Detect PHY type at runtime
drm: bridge: dw-hdmi: Handle overflow workaround based on device version
...
Final block of feature work for 4.11:
- gen8 pd cleanup from Matthew Auld
- more cleanups for view/vma (Chris)
- dmc support on glk (Anusha Srivatsa)
- use core crc api (Tomue)
- track wedged requests using fence.error (Chris)
- lots of psr fixes (Nagaraju, Vathsala)
- dp mst support, acked for merging through drm-intel by Takashi
(Libin)
- huc loading support, including uapi for libva to use it (Anusha
Srivatsa)
* tag 'drm-intel-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-intel: (111 commits)
drm/i915: Update DRIVER_DATE to 20170123
drm/i915: reinstate call to trace_i915_vma_bind
drm/i915: Assert that created vma has a whole number of pages
drm/i915: Assert the drm_mm_node is allocated when on the VM lists
drm/i915: Treat an error from i915_vma_instance() as unlikely
drm/i915: Reject vma creation larger than address space
drm/i915: Use common LRU inactive vma bumping for unpin_from_display
drm/i915: Do an unlocked wait before set-cache-level ioctl
drm/i915/huc: Assert that HuC vma is placed in GuC accessible range
drm/i915/huc: Avoid attempting to authenticate non-existent fw
drm/i915: Set adjustment to zero on Up/Down interrupts if freq is already max/min
drm/i915: Remove the double handling of 'flags from intel_mode_from_pipe_config()
drm/i915: Remove crtc->config usage from intel_modeset_readout_hw_state()
drm/i915: Release temporary load-detect state upon switching
drm/i915: Remove i915_gem_object_to_ggtt()
drm/i915: Remove i915_vma_create from VMA API
drm/i915: Add a check that the VMA instance we lookup matches the request
drm/i915: Rename some warts in the VMA API
drm/i915: Track pinned vma in intel_plane_state
drm/i915/get_params: Add HuC status to getparams
...
This reverts commit 54a07c7bb0,
and reinstates the original.
[airlied: this might be a bad plan for git].
commit 3846fd9b86
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Jan 11 10:01:17 2017 +0100
drm/probe-helpers: Drop locking from poll_enable
It was only needed to protect the connector_list walking, see
commit 8c4ccc4ab6
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:44:26 2015 +0200
drm/probe-helper: Grab mode_config.mutex in poll_init/enable
Unfortunately the commit message of that patch fails to mention that
the new locking check was for the connector_list.
But that requirement disappeared in
commit c36a3254f7
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Dec 15 16:58:43 2016 +0100
drm: Convert all helpers to drm_connector_list_iter
and so we can drop this again.
This fixes a locking inversion on nouveau, where the rpm code needs to
re-enable. But in other places the rpm_get() calls are nested within
the big modeset locks.
While at it, also improve the kerneldoc for these two functions a
notch.
v2: Update the kerneldoc even more to explain that these functions
can't be called concurrently, or bad things happen (Chris).
Backmerge Linus master to get the connector locking revert.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits)
sysctl: fix proc_doulongvec_ms_jiffies_minmax()
Revert "drm/probe-helpers: Drop locking from poll_enable"
MAINTAINERS: add Dan Streetman to zbud maintainers
MAINTAINERS: add Dan Streetman to zswap maintainers
mm: do not export ioremap_page_range symbol for external module
mn10300: fix build error of missing fpu_save()
romfs: use different way to generate fsid for BLOCK or MTD
frv: add missing atomic64 operations
mm, page_alloc: fix premature OOM when racing with cpuset mems update
mm, page_alloc: move cpuset seqcount checking to slowpath
mm, page_alloc: fix fast-path race with cpuset update or removal
mm, page_alloc: fix check for NULL preferred_zone
kernel/panic.c: add missing \n
fbdev: color map copying bounds checking
frv: add atomic64_add_unless()
mm/mempolicy.c: do not put mempolicy before using its nodemask
radix-tree: fix private list warnings
Documentation/filesystems/proc.txt: add VmPin
mm, memcg: do not retry precharge charges
proc: add a schedule point in proc_pid_readdir()
...
We perform the conversion between kernel jiffies and ms only when
exporting kernel value to user space.
We need to do the opposite operation when value is written by user.
Only matters when HZ != 1000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- A bunch of fixes to the Intel drivers: broxton, baytrail.
Bugs related to register offsets, IRQ, debounce functionality.
- Fix a conflict amongst UART settings on the meson.
- Fix the ethernet setting on the Uniphier.
- A compilation warning squelched.
-----BEGIN PGP SIGNATURE-----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=AXUf
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"A bunch of pin control fixes for v4.10 that didn't get sent off until
now, sorry for the delay.
It's only driver fixes:
- A bunch of fixes to the Intel drivers: broxton, baytrail. Bugs
related to register offsets, IRQ, debounce functionality.
- Fix a conflict amongst UART settings on the meson.
- Fix the ethernet setting on the Uniphier.
- A compilation warning squelched"
* tag 'pinctrl-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: uniphier: fix Ethernet (RMII) pin-mux setting for LD20
pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM
pinctrl: amd: avoid maybe-uninitalized warning
pinctrl: baytrail: Do not add all GPIOs to IRQ domain
pinctrl: baytrail: Rectify debounce support
pinctrl: intel: Set pin direction properly
pinctrl: broxton: Use correct PADCFGLOCK offset
-----BEGIN PGP SIGNATURE-----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=PHLN
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.10-rc6-revert-one' of git://people.freedesktop.org/~airlied/linux
Pull drm revert from Dave Airlie:
"Revert one patch missing some prereqs.
One of the connector fixes was missing some prereqs, we have an
alternate driver fix that should work that I'll send tomorrow.
Today is a holiday here so quickly smashing this out"
Daniel Vetter explains:
"I pushed a locking change to fix a nouveau rpm issue to -fixes that
needed the connector_list rework. And that's only in -next, but I
missed that. Dave has the revert in a pull, and he'll follow-up with
the hack nouveau patch for 4.10, and then we'll reapply the proper fix
again for -next and revert the hacks. A bit a mess, but should be
sorted soon"
* tag 'drm-fixes-for-v4.10-rc6-revert-one' of git://people.freedesktop.org/~airlied/linux:
Revert "drm/probe-helpers: Drop locking from poll_enable"
CEA-861-F tells us:
"When transmitting any RGB colorimetry, the Source should set the
YQ-field to match the RGB Quantization Range being transmitted
(e.g., when Limited Range RGB, set YQ=0 or when Full Range RGB,
set YQ=1) and the Sink shall ignore the YQ-field."
So let's go ahead and do that. Perhaps there are sinks that don't
ignore the YQ as they should for RGB?
I wasn't able to find similar text in CEA-861-E, so it would seem
to be a fairly "recent" addition.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
HDMI 2.0 recommends that we set the Q bits in the AVI infoframe
even when the sink does not support quantization range selection (QS=0).
According to CEA-861 we can do that as long as the Q we send matches
the default quantization range for the mode.
Previously I think I had misread the spec as saying that you can't
send a non-zero Q at all when QS=0. But that's not what the spec
actually says.
v2: Fix typo in commit message (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Pull the logic to populate the quantization range information
in the AVI infoframe into a small helper. We'll be adding a bit
more logic to it, and having it in a central place seems like a
good idea since it's based on the CEA-861 spec.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Make the code selecting the RGB quantization range a little less magicy
by wrapping it up in a small helper.
v2: s/adjusted_mode/mode in vc4 to make it actually compile
v3: Add a comment proposed by Eric
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111141835.25369-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
drm_edid.h depends on hdmi.h on account of enum hdmi_picture_aspect,
so let's just include hdmi.h and drop some useless struct declarations.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Since moving drm_crtc_get_hv_timings() into drm_modes.c, the compiler
has been able to get smarter and spots that drm_mode_copy() is trying to
preserve garbage from the stack.
Fixes: 196cd5d375 ("drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126114409.9115-1-chris@chris-wilson.co.uk
Hardware has multiple (2 or 3, depending on model) stride
registers per layer; add a function that correctly takes that
into account. On hardware that only has 2 stride registers,
ensure that 3-plane (YUV) content has identical strides
for both chroma planes.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[Removed smart layer stride setup, comment and commit message clarifications]
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Add the fb->offset[] value to the plane's physical start address
registe. Without that, packed formats are rendered incorrectly.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
If the device-tree 'reg' node doesn't reserve enough
space for the DP, fail to bind.
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[renamed added function to malidp_has_sufficient_address_space]
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
