Patch series "memcontrol selftests fixups", v2.
Flushing the patches to make memcontrol selftests check the events
behavior we had consensus about (test_memcg_low fails).
(test_memcg_reclaim, test_memcg_swap_max fail for me now but it's present
even before the refactoring.)
The two bigger changes are:
- adjustment of the protected values to make tests succeed with the given
tolerance,
- both test_memcg_low and test_memcg_min check protection of memory in
populated cgroups (actually as per Documentation/admin-guide/cgroup-v2.rst
memory.min should not apply to empty cgroups, which is not the case
currently. Therefore I unified tests with the populated case in order to to
bring more broken tests).
This patch (of 5):
This fixes mis-applied changes from commit 72b1e03aa7 ("cgroup: account
for memory_localevents in test_memcg_oom_group_leaf_events()").
Link: https://lkml.kernel.org/r/20220518161859.21565-1-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220518161859.21565-2-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Richard Palethorpe <rpalethorpe@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the origin code, when "ExtSel" is 1, the eventcode will change to
"eventcode |= 1 << 21”. For event “UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS",
its "ExtSel" is "1", its eventcode will change from 0x1E to 0x20001E,
but in fact the eventcode should <=0x1FF, so this will cause the parse
fail:
# perf stat -e "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS" -a sleep 0.1
event syntax error: '.._RxL_CREDITS_CONSUMED_VN0.DRS'
\___ value too big for format, maximum is 511
On the perf kernel side, the kernel assumes the valid bits are continuous.
It will adjust the 0x100 (bit 8 for perf tool) to bit 21 in HW.
DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21");
So the perf tool follows the kernel side and just set bit8 other than bit21.
Fixes: fedb2b5182 ("perf jevents: Add support for parsing uncore json files")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220525140410.1706851-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kernel function urandom_read is replaced with urandom_read_iter.
Therefore, kprobe on urandom_read is not working any more:
[root@eth50-1 bpf]# ./test_progs -n 161
test_stacktrace_build_id:PASS:skel_open_and_load 0 nsec
libbpf: kprobe perf_event_open() failed: No such file or directory
libbpf: prog 'oncpu': failed to create kprobe 'urandom_read+0x0' \
perf event: No such file or directory
libbpf: prog 'oncpu': failed to auto-attach: -2
test_stacktrace_build_id:FAIL:attach_tp err -2
161 stacktrace_build_id:FAIL
Fix this by replacing urandom_read with urandom_read_iter in the test.
Fixes: 1b388e7765 ("random: convert to using fops->read_iter()")
Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20220526191608.2364049-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
Daniel Wagner reported to me that readproc.h got deprecated. Also,
while the procps-ng library was available on Fedora, it was not available
on RHEL, which is a piece of evidence that it was not that used.
rtla uses procps-ng only to find the PID of the tracers' workload.
I used the procps-ng library to avoid reinventing the wheel. But in this
case, reinventing the wheel took me less time than the time we already
took trying to work around problems.
Implement a function that reads /proc/ entries, checking if:
- the entry is a directory
- the directory name is composed only of digits (PID)
- the directory contains the comm file
- the comm file contains a comm that matches the tracers'
workload prefix.
- then return true; otherwise, return false.
And use it instead of procps-ng.
Link: https://lkml.kernel.org/r/e8276e122ee9eb2c5a0ba8e673fb6488b924b825.1652423574.git.bristot@kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tao Zhou <tao.zhou@linux.dev>
Fixes: b1696371d8 ("rtla: Helper functions for rtla")
Reported-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
Architectures can detect availability of extra registers at runtime so
use this more complete set for unwinding. This will include the VG
register on arm64 in a later commit.
If the function isn't implemented then PERF_REGS_MASK is returned and
there is no change.
Committer notes:
Added util/perf_regs.c to tools/perf/util/python-ext-sources so that
'perf test python' passes, i.e. the perf python binding has all the
symbols it needs, addressing:
$ perf test -v python
19: 'import perf' in python :
--- start ---
test child forked, pid 2037817
python usage test: "echo "import sys ; sys.path.append('/tmp/build/perf/python'); import perf" | '/usr/bin/python3' "
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.cpython-310-x86_64-linux-gnu.so: undefined symbol: arch__user_reg_mask
test child finished with -1
---- end ----
'import perf' in python: FAILED!
$
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220525154114.718321-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the slang lib is not installed on the system, perf c2c tool disables TUI
mode and roll back to use stdio mode; but the flag 'c2c.use_stdio' is
missed to set true and thus it wrongly applies UI quirks in the function
ui_quirks().
This commit forces to use stdio interface if slang is not supported, and
it can avoid to apply the UI quirks and show the correct metric header.
Before:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
After:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
Fixes: 5a1a99cd2e ("perf c2c report: Add main TUI browser")
Reported-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220526145400.611249-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This covers two different use cases. The first one is cgroup
filtering given by -G/--cgroup option which controls the off-cpu
profiling for tasks in the given cgroups only.
The other use case is cgroup sampling which is enabled by
--all-cgroups option and it adds PERF_SAMPLE_CGROUP to the sample_type
to set the cgroup id of the task in the sample data.
Example output.
$ sudo perf record -a --off-cpu --all-cgroups sleep 1
$ sudo perf report --stdio -s comm,cgroup --call-graph=no
...
# Samples: 144 of event 'offcpu-time'
# Event count (approx.): 48452045427
#
# Children Self Command Cgroup
# ........ ........ ............... ..........................................
#
61.57% 5.60% Chrome_ChildIOT /user.slice/user-657345.slice/user@657345.service/app.slice/...
29.51% 7.38% Web Content /user.slice/user-657345.slice/user@657345.service/app.slice/...
17.48% 1.59% Chrome_IOThread /user.slice/user-657345.slice/user@657345.service/app.slice/...
16.48% 4.12% pipewire-pulse /user.slice/user-657345.slice/user@657345.service/session.slice/...
14.48% 2.07% perf /user.slice/user-657345.slice/user@657345.service/app.slice/...
14.30% 7.15% CompositorTileW /user.slice/user-657345.slice/user@657345.service/app.slice/...
13.33% 6.67% Timer /user.slice/user-657345.slice/user@657345.service/app.slice/...
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20220518224725.742882-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --off-cpu option to enable the off-cpu profiling with BPF. It'd
use a bpf_output event and rename it to "offcpu-time". Samples will
be synthesized at the end of the record session using data from a BPF
map which contains the aggregated off-cpu time at context switches.
So it needs root privilege to get the off-cpu profiling.
Each sample will have a separate user stacktrace so it will skip
kernel threads. The sample ip will be set from the stacktrace and
other sample data will be updated accordingly. Currently it only
handles some basic sample types.
The sample timestamp is set to a dummy value just not to bother with
other events during the sorting. So it has a very big initial value
and increase it on processing each samples.
Good thing is that it can be used together with regular profiling like
cpu cycles. If you don't want to that, you can use a dummy event to
enable off-cpu profiling only.
Example output:
$ sudo perf record --off-cpu perf bench sched messaging -l 1000
$ sudo perf report --stdio --call-graph=no
# Total Lost Samples: 0
#
# Samples: 41K of event 'cycles'
# Event count (approx.): 42137343851
...
# Samples: 1K of event 'offcpu-time'
# Event count (approx.): 587990831640
#
# Children Self Command Shared Object Symbol
# ........ ........ ............... .................. .........................
#
81.66% 0.00% sched-messaging libc-2.33.so [.] __libc_start_main
81.66% 0.00% sched-messaging perf [.] cmd_bench
81.66% 0.00% sched-messaging perf [.] main
81.66% 0.00% sched-messaging perf [.] run_builtin
81.43% 0.00% sched-messaging perf [.] bench_sched_messaging
40.86% 40.86% sched-messaging libpthread-2.33.so [.] __read
37.66% 37.66% sched-messaging libpthread-2.33.so [.] __write
2.91% 2.91% sched-messaging libc-2.33.so [.] __poll
...
As you can see it spent most of off-cpu time in read and write in
bench_sched_messaging(). The --call-graph=no was added just to make
the output concise here.
It uses perf hooks facility to control BPF program during the record
session rather than adding new BPF/off-cpu specific calls.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20220518224725.742882-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Counts expected fields for various commands. No testing added for
summary mode since it is broken.
An example of the summary output is:
summary,263831,,instructions:u,1435072,100.0,0.46,insn per cycle
,,,,,1.37,stalled cycles per insn
This should be:
summary,263831,,instructions:u,1435072,100.0,0.46,insn per cycle
summary,,,,,,1.37,stalled cycles per insn
The output has 7 fields when it should have 8. Additionally, the newline
spacing is wrong, so it was excluded from testing until a fix is made.
Committer testing:
$ perf test "perf stat CSV output"
88: perf stat CSV output linter : Ok
$
$ perf test -v "perf stat CSV output"
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
88: perf stat CSV output linter :
--- start ---
test child forked, pid 2622839
Checking CSV output: no args [Success]
Checking CSV output: system wide [Skip] paranoid and not root
Checking CSV output: system wide [Skip] paranoid and not root
Checking CSV output: interval [Success]
Checking CSV output: event [Success]
Checking CSV output: per core [Skip] paranoid and not root
Checking CSV output: per thread [Skip] paranoid and not root
Checking CSV output: per die [Skip] paranoid and not root
Checking CSV output: per node [Skip] paranoid and not root
Checking CSV output: per socket [Skip] paranoid and not root
test child finished with 0
---- end ----
perf stat CSV output linter: Ok
$
I did a s/parnoia/paranoid/g on the [Skip] lines.
Signed-off-by: Claire Jensen <cjense@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alyssa Ross <hi@alyssa.is>
Cc: Claire Jensen <clairej735@gmail.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220525053814.3265216-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
