When calling xsk_socket__create_shared(), the logic at line 1097 marks a
boolean flag true within the xsk_umem structure to track setup progress
in order to support multiple calls to the function. However, instead of
marking umem->tx_ring_setup_done, the code incorrectly sets
umem->rx_ring_setup_done. This leads to improper behaviour when
creating and destroying xsk and umem structures.
Multiple calls to this function is documented as supported.
Fixes: ca7a83e248 ("libbpf: Only create rx and tx XDP rings when necessary")
Signed-off-by: Kev Jackson <foamdino@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/YL4aU4f3Aaik7CN0@linux-dev
These macros are convenient wrappers around the bpf_seq_printf and
bpf_snprintf helpers. They are currently provided by bpf_tracing.h which
targets low level tracing primitives. bpf_helpers.h is a better fit.
The __bpf_narg and __bpf_apply are needed in both files and provided
twice. __bpf_empty isn't used anywhere and is removed from bpf_tracing.h
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210526164643.2881368-1-revest@chromium.org
Implement changes to error reporting for high-level libbpf APIs to make them
less surprising and less error-prone to users:
- in all the cases when error happens, errno is set to an appropriate error
value;
- in libbpf 1.0 mode, all pointer-returning APIs return NULL on error and
error code is communicated through errno; this applies both to APIs that
already returned NULL before (so now they communicate more detailed error
codes), as well as for many APIs that used ERR_PTR() macro and encoded
error numbers as fake pointers.
- in legacy (default) mode, those APIs that were returning ERR_PTR(err),
continue doing so, but still set errno.
With these changes, errno can be always used to extract actual error,
regardless of legacy or libbpf 1.0 modes. This is utilized internally in
libbpf in places where libbpf uses it's own high-level APIs.
libbpf_get_error() is adapted to handle both cases completely transparently to
end-users (and is used by libbpf consistently as well).
More context, justification, and discussion can be found in "Libbpf: the road
to v1.0" document ([0]).
[0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTY
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-5-andrii@kernel.org
Add libbpf_set_strict_mode() API that allows application to simulate libbpf
1.0 breaking changes before libbpf 1.0 is released. This will help users
migrate gradually and with confidence.
For now only ALL or NONE options are available, subsequent patches will add
more flags. This patch is preliminary for selftests/bpf changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-2-andrii@kernel.org
LLVM patch https://reviews.llvm.org/D102712
narrowed the scope of existing R_BPF_64_64
and R_BPF_64_32 relocations, and added three
new relocations, R_BPF_64_ABS64, R_BPF_64_ABS32
and R_BPF_64_NODYLD32. The main motivation is
to make relocations linker friendly.
This change, unfortunately, breaks libbpf build,
and we will see errors like below:
libbpf: ELF relo #0 in section #6 has unexpected type 2 in
/home/yhs/work/bpf-next/tools/testing/selftests/bpf/bpf_tcp_nogpl.o
Error: failed to link
'/home/yhs/work/bpf-next/tools/testing/selftests/bpf/bpf_tcp_nogpl.o':
Unknown error -22 (-22)
The new relocation R_BPF_64_ABS64 is generated
and libbpf linker sanity check doesn't understand it.
Relocation section '.rel.struct_ops' at offset 0x1410 contains 1 entries:
Offset Info Type Symbol's Value Symbol's Name
0000000000000018 0000000700000002 R_BPF_64_ABS64 0000000000000000 nogpltcp_init
Look at the selftests/bpf/bpf_tcp_nogpl.c,
void BPF_STRUCT_OPS(nogpltcp_init, struct sock *sk)
{
}
SEC(".struct_ops")
struct tcp_congestion_ops bpf_nogpltcp = {
.init = (void *)nogpltcp_init,
.name = "bpf_nogpltcp",
};
The new llvm relocation scheme categorizes 'nogpltcp_init' reference
as R_BPF_64_ABS64 instead of R_BPF_64_64 which is used to specify
ld_imm64 relocation in the new scheme.
Let us fix the linker sanity checking by including
R_BPF_64_ABS64 and R_BPF_64_ABS32. There is no need to
check R_BPF_64_NODYLD32 which is used for .BTF and .BTF.ext.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210522162341.3687617-1-yhs@fb.com
I'm getting the following error when running 'gen skeleton -L' as
regular user:
libbpf: Error in bpf_object__probe_loading():Operation not permitted(1).
Couldn't load trivial BPF program. Make sure your kernel supports BPF
(CONFIG_BPF_SYSCALL=y) and/or that RLIMIT_MEMLOCK is set to big enough
value.
Fixes: 6723474373 ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210521030653.2626513-1-sdf@google.com
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
In order to be able to generate loader program in the later
patches change the order of data and text relocations.
Also improve the test to include data relos.
If the kernel supports "FD array" the map_fd relocations can be processed
before text relos since generated loader program won't need to manually
patch ld_imm64 insns with map_fd.
But ksym and kfunc relocations can only be processed after all calls
are relocated, since loader program will consist of a sequence
of calls to bpf_btf_find_by_name_kind() followed by patching of btf_id
and btf_obj_fd into corresponding ld_imm64 insns. The locations of those
ld_imm64 insns are specified in relocations.
Hence process all data relocations (maps, ksym, kfunc) together after call relos.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-12-alexei.starovoitov@gmail.com
This adds functions that wrap the netlink API used for adding, manipulating,
and removing traffic control filters.
The API summary:
A bpf_tc_hook represents a location where a TC-BPF filter can be attached.
This means that creating a hook leads to creation of the backing qdisc,
while destruction either removes all filters attached to a hook, or destroys
qdisc if requested explicitly (as discussed below).
The TC-BPF API functions operate on this bpf_tc_hook to attach, replace,
query, and detach tc filters. All functions return 0 on success, and a
negative error code on failure.
bpf_tc_hook_create - Create a hook
Parameters:
@hook - Cannot be NULL, ifindex > 0, attach_point must be set to
proper enum constant. Note that parent must be unset when
attach_point is one of BPF_TC_INGRESS or BPF_TC_EGRESS. Note
that as an exception BPF_TC_INGRESS|BPF_TC_EGRESS is also a
valid value for attach_point.
Returns -EOPNOTSUPP when hook has attach_point as BPF_TC_CUSTOM.
bpf_tc_hook_destroy - Destroy a hook
Parameters:
@hook - Cannot be NULL. The behaviour depends on value of
attach_point. If BPF_TC_INGRESS, all filters attached to
the ingress hook will be detached. If BPF_TC_EGRESS, all
filters attached to the egress hook will be detached. If
BPF_TC_INGRESS|BPF_TC_EGRESS, the clsact qdisc will be
deleted, also detaching all filters. As before, parent must
be unset for these attach_points, and set for BPF_TC_CUSTOM.
It is advised that if the qdisc is operated on by many programs,
then the program at least check that there are no other existing
filters before deleting the clsact qdisc. An example is shown
below:
DECLARE_LIBBPF_OPTS(bpf_tc_hook, .ifindex = if_nametoindex("lo"),
.attach_point = BPF_TC_INGRESS);
/* set opts as NULL, as we're not really interested in
* getting any info for a particular filter, but just
* detecting its presence.
*/
r = bpf_tc_query(&hook, NULL);
if (r == -ENOENT) {
/* no filters */
hook.attach_point = BPF_TC_INGRESS|BPF_TC_EGREESS;
return bpf_tc_hook_destroy(&hook);
} else {
/* failed or r == 0, the latter means filters do exist */
return r;
}
Note that there is a small race between checking for no
filters and deleting the qdisc. This is currently unavoidable.
Returns -EOPNOTSUPP when hook has attach_point as BPF_TC_CUSTOM.
bpf_tc_attach - Attach a filter to a hook
Parameters:
@hook - Cannot be NULL. Represents the hook the filter will be
attached to. Requirements for ifindex and attach_point are
same as described in bpf_tc_hook_create, but BPF_TC_CUSTOM
is also supported. In that case, parent must be set to the
handle where the filter will be attached (using BPF_TC_PARENT).
E.g. to set parent to 1:16 like in tc command line, the
equivalent would be BPF_TC_PARENT(1, 16).
@opts - Cannot be NULL. The following opts are optional:
* handle - The handle of the filter
* priority - The priority of the filter
Must be >= 0 and <= UINT16_MAX
Note that when left unset, they will be auto-allocated by
the kernel. The following opts must be set:
* prog_fd - The fd of the loaded SCHED_CLS prog
The following opts must be unset:
* prog_id - The ID of the BPF prog
The following opts are optional:
* flags - Currently only BPF_TC_F_REPLACE is allowed. It
allows replacing an existing filter instead of
failing with -EEXIST.
The following opts will be filled by bpf_tc_attach on a
successful attach operation if they are unset:
* handle - The handle of the attached filter
* priority - The priority of the attached filter
* prog_id - The ID of the attached SCHED_CLS prog
This way, the user can know what the auto allocated values
for optional opts like handle and priority are for the newly
attached filter, if they were unset.
Note that some other attributes are set to fixed default
values listed below (this holds for all bpf_tc_* APIs):
protocol as ETH_P_ALL, direct action mode, chain index of 0,
and class ID of 0 (this can be set by writing to the
skb->tc_classid field from the BPF program).
bpf_tc_detach
Parameters:
@hook - Cannot be NULL. Represents the hook the filter will be
detached from. Requirements are same as described above
in bpf_tc_attach.
@opts - Cannot be NULL. The following opts must be set:
* handle, priority
The following opts must be unset:
* prog_fd, prog_id, flags
bpf_tc_query
Parameters:
@hook - Cannot be NULL. Represents the hook where the filter lookup will
be performed. Requirements are same as described above in
bpf_tc_attach().
@opts - Cannot be NULL. The following opts must be set:
* handle, priority
The following opts must be unset:
* prog_fd, prog_id, flags
The following fields will be filled by bpf_tc_query upon a
successful lookup:
* prog_id
Some usage examples (using BPF skeleton infrastructure):
BPF program (test_tc_bpf.c):
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>
SEC("classifier")
int cls(struct __sk_buff *skb)
{
return 0;
}
Userspace loader:
struct test_tc_bpf *skel = NULL;
int fd, r;
skel = test_tc_bpf__open_and_load();
if (!skel)
return -ENOMEM;
fd = bpf_program__fd(skel->progs.cls);
DECLARE_LIBBPF_OPTS(bpf_tc_hook, hook, .ifindex =
if_nametoindex("lo"), .attach_point =
BPF_TC_INGRESS);
/* Create clsact qdisc */
r = bpf_tc_hook_create(&hook);
if (r < 0)
goto end;
DECLARE_LIBBPF_OPTS(bpf_tc_opts, opts, .prog_fd = fd);
r = bpf_tc_attach(&hook, &opts);
if (r < 0)
goto end;
/* Print the auto allocated handle and priority */
printf("Handle=%u", opts.handle);
printf("Priority=%u", opts.priority);
opts.prog_fd = opts.prog_id = 0;
bpf_tc_detach(&hook, &opts);
end:
test_tc_bpf__destroy(skel);
This is equivalent to doing the following using tc command line:
# tc qdisc add dev lo clsact
# tc filter add dev lo ingress bpf obj foo.o sec classifier da
# tc filter del dev lo ingress handle <h> prio <p> bpf
... where the handle and priority can be found using:
# tc filter show dev lo ingress
Another example replacing a filter (extending prior example):
/* We can also choose both (or one), let's try replacing an
* existing filter.
*/
DECLARE_LIBBPF_OPTS(bpf_tc_opts, replace_opts, .handle =
opts.handle, .priority = opts.priority,
.prog_fd = fd);
r = bpf_tc_attach(&hook, &replace_opts);
if (r == -EEXIST) {
/* Expected, now use BPF_TC_F_REPLACE to replace it */
replace_opts.flags = BPF_TC_F_REPLACE;
return bpf_tc_attach(&hook, &replace_opts);
} else if (r < 0) {
return r;
}
/* There must be no existing filter with these
* attributes, so cleanup and return an error.
*/
replace_opts.prog_fd = replace_opts.prog_id = 0;
bpf_tc_detach(&hook, &replace_opts);
return -1;
To obtain info of a particular filter:
/* Find info for filter with handle 1 and priority 50 */
DECLARE_LIBBPF_OPTS(bpf_tc_opts, info_opts, .handle = 1,
.priority = 50);
r = bpf_tc_query(&hook, &info_opts);
if (r == -ENOENT)
printf("Filter not found");
else if (r < 0)
return r;
printf("Prog ID: %u", info_opts.prog_id);
return 0;
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> # libbpf API design
[ Daniel: also did major patch cleanup ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210512103451.989420-3-memxor@gmail.com
This change introduces a few helpers to wrap open coded attribute
preparation in netlink.c. It also adds a libbpf_netlink_send_recv() that
is useful to wrap send + recv handling in a generic way. Subsequent patch
will also use this function for sending and receiving a netlink response.
The libbpf_nl_get_link() helper has been removed instead, moving socket
creation into the newly named libbpf_netlink_send_recv().
Every nested attribute's closure must happen using the helper
nlattr_end_nested(), which sets its length properly. NLA_F_NESTED is
enforced using nlattr_begin_nested() helper. Other simple attributes
can be added directly.
The maxsz parameter corresponds to the size of the request structure
which is being filled in, so for instance with req being:
struct {
struct nlmsghdr nh;
struct tcmsg t;
char buf[4096];
} req;
Then, maxsz should be sizeof(req).
This change also converts the open coded attribute preparation with these
helpers. Note that the only failure the internal call to nlattr_add()
could result in the nested helper would be -EMSGSIZE, hence that is what
we return to our caller.
The libbpf_netlink_send_recv() call takes care of opening the socket,
sending the netlink message, receiving the response, potentially invoking
callbacks, and return errors if any, and then finally close the socket.
This allows users to avoid identical socket setup code in different places.
The only user of libbpf_nl_get_link() has been converted to make use of it.
__bpf_set_link_xdp_fd_replace() has also been refactored to use it.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
[ Daniel: major patch cleanup ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210512103451.989420-2-memxor@gmail.com
Static maps never really worked with libbpf, because all such maps were always
silently resolved to the very first map. Detect static maps (both legacy and
BTF-defined) and report user-friendly error.
Tested locally by switching few maps (legacy and BTF-defined) in selftests to
static ones and verifying that now libbpf rejects them loudly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210513233643.194711-2-andrii@kernel.org
Daniel Borkmann says:
====================
pull-request: bpf 2021-05-11
The following pull-request contains BPF updates for your *net* tree.
We've added 13 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 817 insertions(+), 382 deletions(-).
The main changes are:
1) Fix multiple ringbuf bugs in particular to prevent writable mmap of
read-only pages, from Andrii Nakryiko & Thadeu Lima de Souza Cascardo.
2) Fix verifier alu32 known-const subregister bound tracking for bitwise
operations and/or/xor, from Daniel Borkmann.
3) Reject trampoline attachment for functions with variable arguments,
and also add a deny list of other forbidden functions, from Jiri Olsa.
4) Fix nested bpf_bprintf_prepare() calls used by various helpers by
switching to per-CPU buffers, from Florent Revest.
5) Fix kernel compilation with BTF debug info on ppc64 due to pahole
missing TCP-CC functions like cubictcp_init, from Martin KaFai Lau.
6) Add a kconfig entry to provide an option to disallow unprivileged
BPF by default, from Daniel Borkmann.
7) Fix libbpf compilation for older libelf when GELF_ST_VISIBILITY()
macro is not available, from Arnaldo Carvalho de Melo.
8) Migrate test_tc_redirect to test_progs framework as prep work
for upcoming skb_change_head() fix & selftest, from Jussi Maki.
9) Fix a libbpf segfault in add_dummy_ksym_var() if BTF is not
present, from Ian Rogers.
10) Fix tx_only micro-benchmark in xdpsock BPF sample with proper frame
size, from Magnus Karlsson.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For better future extensibility add per-file linker options. Currently
the set of available options is empty. This changes bpf_linker__add_file()
API, but it's not a breaking change as bpf_linker APIs hasn't been released
yet.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210507054119.270888-3-andrii@kernel.org
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
One of our benchmarks running in (Google-internal) CI pushes data
through the ringbuf faster htan than userspace is able to consume
it. In this case it seems we're actually able to get >INT_MAX entries
in a single ring_buffer__consume() call. ASAN detected that cnt
overflows in this case.
Fix by using 64-bit counter internally and then capping the result to
INT_MAX before converting to the int return type. Do the same for
the ring_buffer__poll().
Fixes: bf99c936f9 (libbpf: Add BPF ring buffer support)
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210429130510.1621665-1-jackmanb@google.com
Pull perf tool updates from Arnaldo Carvalho de Melo:
"perf stat:
- Add support for hybrid PMUs to support systems such as Intel
Alderlake and its BIG/little core/atom cpus.
- Introduce 'bperf' to share hardware PMCs with BPF.
- New --iostat option to collect and present IO stats on Intel
hardware.
This functionality is based on recently introduced sysfs attributes
for Intel® Xeon® Scalable processor family (code name Skylake-SP)
in commit bb42b3d397 ("perf/x86/intel/uncore: Expose an Uncore
unit to IIO PMON mapping")
It is intended to provide four I/O performance metrics in MB per
each PCIe root port:
- Inbound Read: I/O devices below root port read from the host memory
- Inbound Write: I/O devices below root port write to the host memory
- Outbound Read: CPU reads from I/O devices below root port
- Outbound Write: CPU writes to I/O devices below root port
- Align CSV output for summary.
- Clarify --null use cases: Assess raw overhead of 'perf stat' or
measure just wall clock time.
- Improve readability of shadow stats.
perf record:
- Change the COMM when starting tha workload so that --exclude-perf
doesn't seem to be not honoured.
- Improve 'Workload failed' message printing events + what was
exec'ed.
- Fix cross-arch support for TIME_CONV.
perf report:
- Add option to disable raw event ordering.
- Dump the contents of PERF_RECORD_TIME_CONV in 'perf report -D'.
- Improvements to --stat output, that shows information about
PERF_RECORD_ events.
- Preserve identifier id in OCaml demangler.
perf annotate:
- Show full source location with 'l' hotkey in the 'perf annotate'
TUI.
- Add line number like in TUI and source location at EOL to the 'perf
annotate' --stdio mode.
- Add --demangle and --demangle-kernel to 'perf annotate'.
- Allow configuring annotate.demangle{,_kernel} in 'perf config'.
- Fix sample events lost in stdio mode.
perf data:
- Allow converting a perf.data file to JSON.
libperf:
- Add support for user space counter access.
- Update topdown documentation to permit rdpmc calls.
perf test:
- Add 'perf test' for 'perf stat' CSV output.
- Add 'perf test' entries to test the hybrid PMU support.
- Cleanup 'perf test daemon' if its 'perf test' is interrupted.
- Handle metric reuse in pmu-events parsing 'perf test' entry.
- Add test for PE executable support.
- Add timeout for wait for daemon start in its 'perf test' entries.
Build:
- Enable libtraceevent dynamic linking.
- Improve feature detection output.
- Fix caching of feature checks caching.
- First round of updates for tools copies of kernel headers.
- Enable warnings when compiling BPF programs.
Vendor specific events:
- Intel:
- Add missing skylake & icelake model numbers.
- arm64:
- Add Hisi hip08 L1, L2 and L3 metrics.
- Add Fujitsu A64FX PMU events.
- PowerPC:
- Initial JSON/events list for power10 platform.
- Remove unsupported power9 metrics.
- AMD:
- Add Zen3 events.
- Fix broken L2 Cache Hits from L2 HWPF metric.
- Use lowercases for all the eventcodes and umasks.
Hardware tracing:
- arm64:
- Update CoreSight ETM metadata format.
- Fix bitmap for CS-ETM option.
- Support PID tracing in config.
- Detect pid in VMID for kernel running at EL2.
Arch specific updates:
- MIPS:
- Support MIPS unwinding and dwarf-regs.
- Generate mips syscalls_n64.c syscall table.
- PowerPC:
- Add support for PERF_SAMPLE_WEIGH_STRUCT on PowerPC.
- Support pipeline stage cycles for powerpc.
libbeauty:
- Fix fsconfig generator"
* tag 'perf-tools-for-v5.13-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (132 commits)
perf build: Defer printing detected features to the end of all feature checks
tools build: Allow deferring printing the results of feature detection
perf build: Regenerate the FEATURE_DUMP file after extra feature checks
perf session: Dump PERF_RECORD_TIME_CONV event
perf session: Add swap operation for event TIME_CONV
perf jit: Let convert_timestamp() to be backwards-compatible
perf tools: Change fields type in perf_record_time_conv
perf tools: Enable libtraceevent dynamic linking
perf Documentation: Document intel-hybrid support
perf tests: Skip 'perf stat metrics (shadow stat) test' for hybrid
perf tests: Support 'Convert perf time to TSC' test for hybrid
perf tests: Support 'Session topology' test for hybrid
perf tests: Support 'Parse and process metrics' test for hybrid
perf tests: Support 'Track with sched_switch' test for hybrid
perf tests: Skip 'Setup struct perf_event_attr' test for hybrid
perf tests: Add hybrid cases for 'Roundtrip evsel->name' test
perf tests: Add hybrid cases for 'Parse event definition strings' test
perf record: Uniquify hybrid event name
perf stat: Warn group events from different hybrid PMU
perf stat: Filter out unmatched aggregation for hybrid event
...
Add BTF_KIND_FLOAT support when doing CO-RE field type compatibility check.
Without this, relocations against float/double fields will fail.
Also adjust one error message to emit instruction index instead of less
convenient instruction byte offset.
Fixes: 22541a9eeb ("libbpf: Add BTF_KIND_FLOAT support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-3-andrii@kernel.org
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).
The main changes are:
1) Add BPF static linker support for extern resolution of global, from Andrii.
2) Refine retval for bpf_get_task_stack helper, from Dave.
3) Add a bpf_snprintf helper, from Florent.
4) A bunch of miscellaneous improvements from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add extra logic to handle map externs (only BTF-defined maps are supported for
linking). Re-use the map parsing logic used during bpf_object__open(). Map
externs are currently restricted to always match complete map definition. So
all the specified attributes will be compared (down to pining, map_flags,
numa_node, etc). In the future this restriction might be relaxed with no
backwards compatibility issues. If any attribute is mismatched between extern
and actual map definition, linker will report an error, pointing out which one
mismatches.
The original intent was to allow for extern to specify attributes that matters
(to user) to enforce. E.g., if you specify just key information and omit
value, then any value fits. Similarly, it should have been possible to enforce
map_flags, pinning, and any other possible map attribute. Unfortunately, that
means that multiple externs can be only partially overlapping with each other,
which means linker would need to combine their type definitions to end up with
the most restrictive and fullest map definition. This requires an extra amount
of BTF manipulation which at this time was deemed unnecessary and would
require further extending generic BTF writer APIs. So that is left for future
follow ups, if there will be demand for that. But the idea seems intresting
and useful, so I want to document it here.
Weak definitions are also supported, but are pretty strict as well, just
like externs: all weak map definitions have to match exactly. In the follow up
patches this most probably will be relaxed, with __weak map definitions being
able to differ between each other (with non-weak definition always winning, of
course).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-13-andrii@kernel.org
