Mixer controls have the channel id in mixer->reg, which is not same
as port id. port id should be derived from chan_info array.
So fix this. Without this, its possible that we could corrupt
struct wcd938x_sdw_priv by accessing port_map array out of range
with channel id instead of port id.
Fixes: e8ba1e05bd ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Daniel Beer <daniel.beer@igorinstitute.com>:
This pair of patches implements support for the TAS5805M class D audio
amplifier. This driver, and the example configuration in the device-tree
file, were originally based on a 4.19 series kernel and have been
modified slightly from the tested version.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Add system suspend and resume handlers so that the cs42l42 is cleanly
put into power-off state during system suspend and the registers are
restored in resume.
Merge series from Ariel D'Alessandro <ariel.dalessandro@collabora.com>:
Sound cards may allow using different main clock inputs. In the generic
fsl-asoc-card driver, these values are hardcoded for each specific card
configuration. Let's make it more flexible, allowing setting mclk-id
from the device-tree node.
Since the potential failure of the devm_regmap_init_mmio(), it will
return error pointer and be assigned to the regmap.
Then the error pointer will be dereferenced.
For example rx->regmap will be used in rx_macro_mclk_enable().
Therefore, it should be better to check it.
Fixes: af3d54b997 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Fixes: c39667ddcf ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Fixes: 809bcbcece ("ASoC: codecs: lpass-wsa-macro: Add support to WSA Macro")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220121171031.2826198-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Add system suspend functions to handle clean power-down on suspend and
restoring registers on resume.
The jack state could change during suspend. Plug->unplug and unplug->plug
are straightforward because this looks no different from any other plug
state change - there will be a plugged or unplugged interrupt pending.
The jack could be unplugged and a different type of jack plugged, and on
resume the plug state would not have changed. Setting plug_state back to
TS_TRANS (transitioning) will make the next plug interrupt after resume
run a type detection.
During system suspend any jack plug/unplug and button events will not be
reported or generate a system wakeup. If the plug state or headset type
has changed it will be reported after resume.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121120412.672284-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename jack_detect_mutex to irq_lock and make it lock the entire IRQ
handling.
The jack_detect_mutex was introduced to synchronize registering an
ALSA jack handler, via cs42l42_set_jack(), with the jack state
processing in the IRQ handler, and was taken only around the
relevant part of the IRQ handling code.
System suspend will need to synchronize with the IRQ handler thread
so will need a similar mutex that surrounds all of the IRQ handling.
Repurposing the existing jack_detect_mutex is the simplest option.
It does no harm for a call to cs42l42_set_jack() to additionally
block the first few lines of IRQ handling, and the only interrupts
used by the driver are all for jack handling.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121120412.672284-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a plug event is detect report the full state of all status
bits, don't assume that there will have been a previous unplug
event to clear all the bits. Report the state of both HEADPHONE
and MICROPHONE bits according to detected type, and clear all the
button status bits. The current button status is already checked
and reported at the end of the function.
During a system suspend the jack could be unplugged and plugged,
possibly changing the jack type. On resume the interrupt status will
indicate a plug event - there will not be an unplug event to clear
the bits.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121120412.672284-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for negative values of "priv->gain" to prevent an out of bounds
access. The concern is that these might come from the user via:
-> snd_ctl_elem_write_user()
-> snd_ctl_elem_write()
-> kctl->put()
Fixes: fa8d915172 ("ASoC: max9759: Add Amplifier Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220119123101.GA9509@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
If the device does not exist, of_get_child_by_name() will return NULL
pointer.
And devm_snd_soc_register_component() does not check it.
Also, I have noticed that cpcap_codec_driver has not been used yet.
Therefore, it should be better to check it in order to avoid the future
dereference of the NULL pointer.
Fixes: f6cdf2d344 ("ASoC: cpcap: new codec")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220111025048.524134-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for the addition of PM runtime support move the test
key out of the register patches themselves. This is necessary to
allow the test key to be held during cache synchronisation, which is
required by the OTP settings which were unpacked from the device and
written by the driver.
Also whilst at it, the driver uses a mixture of accessing the test key
register by name and by address, consistently use the name.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220107160636.6555-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, rx_port_value is a single unsigned int that gets overwritten
when slim_rx_mux_put() is called for any RX mux, then the same value is
read when slim_rx_mux_get() is called for any of them. This results in
slim_rx_mux_get() reporting the last value set by slim_rx_mux_put()
regardless of which SLIM RX mux is in question.
Turn rx_port_value into an array and store a separate value for each
SLIM RX mux.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220104033356.343685-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some boards have the codec IRQ hooked-up as normally, so the driver can
still do things like headset vs headphones and button-press detection,
but instead of using one of the JD pins of the codec, an external GPIO
is used to report the jack-presence switch status of the jack.
Add support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On some boards where the firmware/fwnode information is in essence
read-only (x86 + ACPI boards) the i2c_client for the codec may contain
the wrong IRQ or no IRQ at all.
Since we only request the IRQ once snd_soc_component_set_jack() gets
called, allow machine drivers to override the IRQ with the proper one
through the data parameter to snd_soc_component_set_jack().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 2b9c8d2b3c ("ASoC: rt5640: Add the HDA header support") adds
re-queuing of the jack_work on resume when rt5640->jd_src != 0.
But the jack_work will unconditionally deref rt5640->jack and that might
be NULL. E.g. the sound/soc/intel/boards/bytcr_rt5640.c machine driver
call snd_soc_component_set_jack(codec, NULL, NULL) from pre_suspend to
disable the IRQ to avoid spurious wakeups, so when rt5640_resume()
runs rt5640->jack will be NULL in this case.
Make the queueing of the work conditional on rt5640->jack instead of
on rt5640->jd_src to fix this.
Fixes: 2b9c8d2b3c ("ASoC: rt5640: Add the HDA header support")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A randconfig caught a compile warning that is now treated as a fatal
error:
sound/soc/codecs/ak4375.c:415:13: error: ‘ak4375_power_off’ defined but not used [-Werror=unused-function]
where ak4375_power_off() is used only from the PM handler.
As both suspend and resumes are already marked with __maybe_unused,
let's rip off the superfluous ifdef CONFIG_PM, so that the error above
can be avoided.
Fixes: 53778b8292 ("ASoC: Add AK4375 support")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220105162409.20635-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This patch series adds support for the low power hibernation feature
on cs35l41. This allows the DSP memory to be retained whilst the
device enters a very low power state.
ASoC: Updates for v5.17
Not much going on framework release this time, but a big update for
drivers especially the Intel and SOF ones.
- Refinements and cleanups around the delay() APIs.
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code.
- Support for pin switches in simple-card derived cards.
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx.
In the case a device can support retaining the firmware memory across
low power states it is useful for the preloader widget to only power up
whilst actually loading/unloading the core, as opposed to the normal
operation where the widget is powered for the entire time a firmware is
preloaded onto the core. Add support for this mode and a flag to enable
it.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes no sense to cache the test/user key registers, since they
require values written at specific times, mark them volatile. It is
probably best if they can't be accessed from user-space either, so
mark them precious as well.
The interrupt force, edge, polarity and debounce are all settings
applied to the IRQ rather than status bits and as such should not be
volatile.
The OTP trim values will require re-application in the event of a
cache sync and as such should not be volatile. The OTPID however
should be volatile.
The DSP scratch registers are used to read back an error/debug code
from the DSP on shutdown, as such these should be marked volatile.
Finally, add some missing defaults, add TST_FS_MON0, and allow the
DSP core control register to be cached.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC and HDA systems require the same errata patches, so
move it to the shared code using a function the correctly
applies the patches by revision
Also, move CS35L41_DSP1_CCM_CORE_CTRL write to errata
patch function as is required to be written at boot,
but not in regmap_register_patch sequence as will affect
waking up from hibernation
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-5-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support CS35L41 in HDA systems the HDA driver
for CS35L41 would have to duplicate some functions
that already exist on ASoC driver
So instead of duplicate the code, use the new lib
source as a shared resource for both ASoC and HDA
Also, change the way CONFIG_SND_SOC_CS35L41 is
selected, as reported by Intel Kernel test robot,
it is possible to build SND_SOC_CS35L41_SPI/I2C
without the main driver, which would lead to build
failures.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20211217115708.882525-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mclk might not be registered as a fixed clk name "mclk" on some
platforms.
In those platforms, if the mclk needed to be controlled by codec driver
and acquired by a fixed name, it would be a problem.
This patch to fix the issue that wclk becomes an orphan due to the fixed
mclk's name.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211227055446.27563-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Chip ID - Register 01h contains the following description
as per the CS4265 datasheet:
"Bits 7 through 4 are the part number ID, which is 1101b (0Dh)"
The current error message is incorrect as it prints CS4265_CHIP_ID,
which is the register number, instead of printing the expected
part number ID value.
To make it clearer, also do a shift by 4, so that the error message
would become:
[ 4.218083] cs4265 1-004f: CS4265 Part Number ID: 0x0 Expected: 0xd
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211222141920.1482451-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
This series contains three topics.
1. SoundWire: Intel: remove pdm support
2. ASoC/SoundWire: dai: expand 'stream' concept beyond SoundWire
3. ASoC/SOF/SoundWire: fix suspend-resume on pause with dynamic pipelines
The topics are independent but the changes are dependent. So please
allow me to send them in one series.
The HDAudio ASoC support relies on the set_tdm_slots() helper to store
the HDaudio stream tag in the tx_mask. This only works because of the
pre-existing order in soc-pcm.c, where the hw_params() is handled for
codec_dais *before* cpu_dais. When the order is reversed, the
stream_tag is used as a mask in the codec fixup functions:
/* fixup params based on TDM slot masks */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
codec_dai->tx_mask)
soc_pcm_codec_params_fixup(&codec_params,
codec_dai->tx_mask);
As a result of this confusion, the codec_params_fixup() ends-up
generating bad channel masks, depending on what stream_tag was
allocated.
We could add a flag to state that the tx_mask is really not a mask,
but it would be quite ugly to persist in overloading concepts.
Instead, this patch suggests a more generic get/set 'stream' API based
on the existing model for SoundWire. We can expand the concept to
store 'stream' opaque information that is specific to different DAI
types. In the case of HDAudio DAIs, we only need to store a stream tag
as an unsigned char pointer. The TDM rx_ and tx_masks should really
only be used to store masks.
Rename get_sdw_stream/set_sdw_stream callbacks and helpers as
get_stream/set_stream. No functionality change beyond the rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The analog codec has separate output paths for the left headphone channel
(HPH_L) and the right headphone channel (HPH_R). While they are usually
used together for actual headphones output, some devices also have an
analog speaker amplifier connected to one of the headphone channels.
To allow modelling that properly (and to avoid powering on the unneeded
output path), HPH_L and HPH_R should be represented by separate outputs
rather than a shared HEADPHONE output that always activates both paths.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20211214142049.20422-5-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
