Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered before rc1,
including a few regression fixes for the problem in the previous pull
request"
* tag 'sound-fix-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: gus: Fix repeated probe for ISA interwave card
ALSA: gus: Fix repeated probes of snd_gus_create()
ALSA: vx222: fix null-ptr-deref
ASoC: rockchip: i2s: Fix concurrency between tx/rx
ASoC: mt8195: correct the dts parsing logic about DPTX and HDMITX
ASoC: Intel: boards: Fix CONFIG_SND_SOC_SDW_MOCKUP select
ASoC: dt-bindings: fsl_rpmsg: Add compatible string for i.MX8ULP
ALSA: usb-audio: Add registration quirk for JBL Quantum 800
ASoC: rt5682: fix headset background noise when S3 state
ASoC: dt-bindings: mt8195: remove dependent headers in the example
ASoC: mediatek: SND_SOC_MT8195 should depend on ARCH_MEDIATEK
ASoC: samsung: s3c24xx_simtec: fix spelling mistake "devicec" -> "device"
ASoC: audio-graph: respawn Platform Support
ASoC: mediatek: mt8195: add MTK_PMIC_WRAP dependency
Pull sound updates from Takashi Iwai:
"There are a few intensive changes in ALSA core side at this time that
helped with significant code reduction. Meanwhile we keep getting new
stuff, so the total size still grows...
Anyway, the below are some highlights in this development cycle.
ALSA core:
- New helpers to manage page allocations and card object with devres
- Refactoring for memory allocation with wc-pages
- A new PCM hardware flag SNDRV_PCM_INFO_EXPLICIT_SYNC for
controlling the explicit sync of the stream control; it'll be used
for ASoC SOF and non-coherent memory in future
ASoC:
- Lots of cleanups and improvements to the Intel drivers, including
some new systems support
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195,
Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L,
Rockchip RK3568 S/PDIF
USB-audio:
- Re-organized the quirk handling and a new option quirk_flags
- Fix for a regression in 5.14 code change for JACK
- Quirks for Sony WALKMAN, Digidesign mbox
HD-audio:
- Enhanced support for CS8409 codec
- More consistent shutdown behavior with the runtime PM
- The model option can accept the PCI or codec SSID as an alias
- Quirks for ASUS ROG, HP Spectre x360
Others:
- Lots of code reduction in legacy drivers with devres helpers
- FireWire MOTU 896HD support"
* tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (421 commits)
ASoC: Revert PCM trigger changes
ALSA: usb-audio: Add lowlatency module option
ALSA: hda/cs8409: Initialize Codec only in init fixup.
ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary
ALSA: usb-audio: Work around for XRUN with low latency playback
ALSA: pcm: fix divide error in snd_pcm_lib_ioctl
ASoC: soc-pcm: test refcount before triggering
ASoC: soc-pcm: protect BE dailink state changes in trigger
ASoC: wcd9335: Disable irq on slave ports in the remove function
ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function
ASoC: wcd9335: Fix a double irq free in the remove function
ALSA: hda: Disable runtime resume at shutdown
ASoC: rockchip: i2s: Add support for frame inversion
ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs
ASoC: rockchip: i2s: Add compatible for more SoCs
ASoC: rockchip: i2s: Make playback/capture optional
ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B
ASoC: dt-bindings: rockchip: Document reset property for i2s
ASoC: rockchip: i2s: Fix regmap_ops hang
ASoC: rockchip: i2s: Improve dma data transfer efficiency
...
There is no point in calling 'free_irq()' explicitly for
'WCD9335_IRQ_SLIMBUS' in the remove function.
The irqs are requested in 'wcd9335_setup_irqs()' using a resource managed
function (i.e. 'devm_request_threaded_irq()').
'wcd9335_setup_irqs()' requests all what is defined in the 'wcd9335_irqs'
structure.
This structure has only one entry for 'WCD9335_IRQ_SLIMBUS'.
So 'devm_request...irq()' + explicit 'free_irq()' would lead to a double
free.
Remove the unneeded 'free_irq()' from the remove function.
Fixes: 20aedafdf4 ("ASoC: wcd9335: add support to wcd9335 codec")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <0614d63bc00edd7e81dd367504128f3d84f72efa.1629091028.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch reverts commit acbf58e530 ("ASoC: wm_adsp: Let
soc_cleanup_component_debugfs remove debugfs"), and adds an
alternate solution to the issue. That patch removes the call to
debugfs_remove_recursive, which cleans up the DSPs debugfs. The
intention was to avoid an unbinding issue on an out of tree
driver/platform.
The issue with the patch is it means the driver no longer cleans up
its own debugfs, instead relying on ASoC to remove recurive on the
parent debugfs node. This is conceptually rather unclean, but also it
would prevent DSPs being added/removed independently of ASoC and soon
we are going to be upstreaming some non-audio parts with these DSPs,
which will require this.
Finally, it seems the issue on the platform is a result of the
wm_adsp2_cleanup_debugfs getting called twice. This is very likely a
problem on the platform side and will be resolved there. But in the mean
time make the code a little more robust to such issues, and again
conceptually a bit nicer, but clearing the debugfs_root variable in the
DSP structure when the debugfs is removed.
Fixes: acbf58e530 ("ASoC: wm_adsp: Let soc_cleanup_component_debugfs remove debugfs"
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210824101552.1119-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Vinod writes:
soundwire updates for 5.15-rc1
- Core has updates to support SoundWire mockup device (includes tag from
asoc), improved error handling and slave status.
- Drivers has update on Intel driver for new quriks and better handling of
errors and suspend routines
* tag 'soundwire-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
soundwire: cadence: override PDI configurations to create loopback
soundwire: cadence: add debugfs interface for PDI loopbacks
soundwire: stream: don't program mockup device ports
soundwire: bus: squelch error returned by mockup devices
soundwire: add flag to ignore all command/control for mockup devices
soundwire: stream: don't abort bank switch on Command_Ignored/-ENODATA
soundwire: cadence: add paranoid check on self-clearing bits
soundwire: dmi-quirks: add quirk for Intel 'Bishop County' NUC M15
soundwire: bus: update Slave status in sdw_clear_slave_status
soundwire: cadence: Remove ret variable from sdw_cdns_irq()
soundwire: bus: filter out more -EDATA errors on clock stop
soundwire: dmi-quirks: add ull suffix for SoundWire _ADR values
ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests
ASoC: soc-acpi: tgl: add table for SoundWire mockup devices
ASoC: soc-acpi: cnl: add table for SoundWire mockup devices
ASoC: codecs: add SoundWire mockup device support
bclk_ms is possible unused by using the given config (see [1]).
sound/soc/codecs/rt1015.c:724:2: warning: Value stored to 'bclk_ms' is
never read [clang-analyzer-deadcode.DeadStores]
bclk_ms = frame_size > 32;
^ ~~~~~~~~~~~~~~~
In addition, bclk_ms is meaningless and confusing after applying commit
a5db2ca513 ("ASoC: rt1015: remove unneeded variables in rt1015_priv").
The "> 32" in the expression looks like a typo but it was not.
Let's remove the confusing variable bclk_ms.
[1]: https://lkml.org/lkml/2021/8/23/305
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210823153323.1297723-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices don't use the builtin jack-detect but can still benefit
from the mic-bias-current over-current-detection to differentiate
between headphones vs a headset.
Move the ovcd init code from rt5640_enable_jack_detect() into a new
rt5640_set_ovcd_params() helper and export this helper as well
as a couple of related ovcd functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices don't use the builtin jack-detect but can still benefit
from the mic-bias-current over-current-detection headphones vs
headset detection done by rt5640_detect_headset().
In this case the jack-inserted check done by rt5640_detect_headset()
needs to be done through a GPIO rather then by using the codec's
builtin jack-detect. Add an optional hp_det_gpio parameter and export
rt5640_detect_headset() for use on machines where jack-detect is
handled outside of the codec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Delay requesting the IRQ until the machine-drv calls set_jack.
The main reason for this is that the codec's IRQ is unused on some boards,
in which case we really should not call request_irq at all.
On some boards there is an IRQ listed at index 0 for the codec, but
this is not connected to the codec, but rather is directly connected
to the jack's jack-detect pin. These special setups will be handled
by the machine-driver, but the machine driver can only request the IRQ
if it is not first requested by the codec driver. Moving the request_irq
to the set_jack callback (which will not get called in this case) avoids
the codec-driver clobbering the IRQ.
Moving the request_irq also removes the need to disable the IRQ immediately
after requesting it, avoiding a small race (this could also have been fixed
by using the new IRQF_NO_AUTOEN flag when requesting the IRQ).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When I booted up on a board that had a slightly different codec
stuffed on it, I got this message at bootup:
rt5682 9-001a: Device with ID register 6749 is not rt5682
That's normal/expected, but what wasn't normal was the splat that I
got after:
WARNING: CPU: 7 PID: 176 at drivers/regulator/core.c:2151 _regulator_put+0x150/0x158
pc : _regulator_put+0x150/0x158
...
Call trace:
_regulator_put+0x150/0x158
regulator_bulk_free+0x48/0x70
devm_regulator_bulk_release+0x20/0x2c
release_nodes+0x1cc/0x244
devres_release_all+0x44/0x60
really_probe+0x17c/0x378
...
This is because the error paths don't turn off the regulator. Let's
fix that.
Fixes: 0ddce71c21 ("ASoC: rt5682: add rt5682 codec driver")
Fixes: 87b42abae9 ("ASoC: rt5682: Implement remove callback")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210811081751.v2.1.I4a1d9aa5d99e05aeee15c2768db600158d76cab8@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Fixes for v5.14
Quite a lot of fixes here, the biggest set being for the cs42l42 driver
which is reasonably old but has seen a sudden uptick in activity.
There's also some fixes for correctly referencing PCM buffer addresses
and the removal of some driver-local bodges that had been done for the
lack of prefix handling in DAPM which were broken by the core handling
that as expected.
If the machine driver doesn't call snd_soc_dai_set_sysclk() the
SCLK is assumed to be sample_rate * sample_bits * 2 (that is, the
rate necessary for a standard I2S frame).
But 24-bit samples can be sent in either a 24-bit slot or a 32-bit
slot. If the PLL is configured for a 24-bit slot, but a 32-bit slot is
used, cs42l42 will be overclocked.
Ultimately it is the machine driver's responsibilty to call
snd_soc_dai_set_sysclk() if SLK will be different from the standard
I2S rate. However, it is convenient to assume 32-bit slots to allow
this common case without needing special machine driver support. The
machine driver then only has to set SCLK if the slots are 24-bit, but
if it fails to do this cs42l42 won't be overclocked.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210805161111.10410-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Interrupt is optional for the RT5640 codec. Nexus 7 doesn't use interrupt,
this results in a noisy warning message that looks like a error condition.
Make interrupt explicitly optional to silence the message, use modern
IRQF_NO_AUTOEN flag and correct the reg[q]uest typo in the message.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210802185258.1881-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I2S always has two LRCLK phases and both CH1 and CH2 of the RX
must be enabled (corresponding to the low and high phases of LRCLK.)
The selection of the valid data channels is done by setting the DAC
CHA_SEL and CHB_SEL. CHA_SEL is always the first (left) channel,
CHB_SEL depends on the number of active channels.
Previously for mono ASP CH2 was not enabled, the result was playing
mono data would not produce any audio output.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 621d65f3b8 ("ASoC: cs42l42: Provide finer control on playback path")
Link: https://lore.kernel.org/r/20210805161111.10410-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The lowest valid SCLK corresponds to 44.1 kHz at 16-bit. Sample
rates less than this would produce SCLK below the minimum when using
a normal I2S frame. A constraint must be applied to prevent this.
The constraint is not applied if the machine driver sets SCLK, to
allow setups where the host generates additional bits per LRCLK
phase to increase the SCLK frequency. In these cases the machine
driver would always have to inform this driver of the actual SCLK,
and it must select a legal SCLK.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210805161111.10410-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both SCLK and PLL clocks must be running to drive the glitch-free mux
behind MCLK_SRC_SEL and complete the switchover.
This patch moves the writing of MCLK_SRC_SEL to when the PLL is started
and stopped, so that it only transitions while the PLL is running.
The unconditional write MCLK_SRC_SEL=0 in cs42l42_mute_stream() is safe
because if the PLL is not running MCLK_SRC_SEL is already 0.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 43fc357199 ("ASoC: cs42l42: Set clock source for both ways of stream")
Link: https://lore.kernel.org/r/20210805161111.10410-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/wcd938x.c:3701:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/codecs/wcd938x.c:3691:6: note: If condition 'ret' is true,
the function will return/exit
if (ret)
^
sound/soc/codecs/wcd938x.c:3701:9: note: Returning identical expression 'ret'
return ret;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210804192456.278702-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The logic for the jack detection has not changed since the first
commit for this driver. Remove a duplicate read and remove useless
assignment
sound/soc/codecs/max98090.c:2170:6: style: Variable 'reg' is
reassigned a value before the old one has been
used. [redundantAssignment]
reg = snd_soc_component_read(component, M98090_REG_JACK_STATUS);
^
sound/soc/codecs/max98090.c:2161:7: note: reg is assigned
reg = snd_soc_component_read(component, M98090_REG_JACK_STATUS);
^
sound/soc/codecs/max98090.c:2170:6: note: reg is overwritten
reg = snd_soc_component_read(component, M98090_REG_JACK_STATUS);
^
sound/soc/codecs/max98090.c:2170:6: style: Variable 'reg' is
reassigned a value before the old one has been
used. [redundantAssignment]
reg = snd_soc_component_read(component, M98090_REG_JACK_STATUS);
^
sound/soc/codecs/max98090.c:2167:7: note: reg is assigned
reg = snd_soc_component_read(component, M98090_REG_JACK_STATUS);
^
sound/soc/codecs/max98090.c:2170:6: note: reg is overwritten
reg = snd_soc_component_read(component, M98090_REG_JACK_STATUS);
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210804192456.278702-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the array div on the stack but instead it
static const. Makes the object code smaller by 48 bytes.
Before:
text data bss dec hex filename
53894 16368 128 70390 112f6 ./sound/soc/codecs/rt5514.o
After:
text data bss dec hex filename
53750 16464 128 70342 112c6 ./sound/soc/codecs/rt5514.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210801064023.138359-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was defining two ALSA controls that both change the same
register field for the wind noise filter corner frequency. The filter
response has two corners, at different frequencies, and the duplicate
controls most likely were an attempt to be able to set the value using
either of the frequencies.
However, having two controls changing the same field can be problematic
and it is unnecessary. Both frequencies are related to each other so
setting one implies exactly what the other would be.
Removing a control affects user-side code, but there is currently no
known use of the removed control so it would be best to remove it now
before it becomes a problem.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2c394ca796 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20210803160834.9005-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the array clocks on the stack but instead it
static. Makes the object code smaller by 316 bytes.
Before:
text data bss dec hex filename
63668 28264 0 91932 1671c ./sound/soc/codecs/tlv320aic32x4.o
After:
text data bss dec hex filename
62616 29000 0 91616 165e0 ./sound/soc/codecs/tlv320aic32x4.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210801064807.138641-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
