Add linux/module.h in acp-pci.c to solve the below dependency
All error/warnings (new ones prefixed by >>):
>> sound/soc/amd/acp/acp-pci.c:148:1: warning: data definition has no type or storage class
148 | MODULE_DEVICE_TABLE(pci, acp_pci_ids);
| ^~~~~~~~~~~~~~~~~~~
>> sound/soc/amd/acp/acp-pci.c:148:1: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' [-Werror=implicit-int]
...
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Syed Saba Kareem<ssabakar@amd.com>
Link: https://lore.kernel.org/r/20220523112956.3087604-1-ssabakar@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT1019 codec has two ways of controlling the en_spkr. one way is
controlling through gpio pin method the another way is through codec
register update through driver.
Now Speaker enable/disable is controlled through codec register updated
by codec driver. This patch reverts gpio logic.
This reverts commit 5c5f08f7fc ("ASoC:
amd: acp: Power on/off the speaker enable gpio pin based on DAPM
callback.")
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20220516160619.17832-2-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT1019 codec has two ways of controlling the en_spkr. one way is
controlling through gpio pin method the another way is through codec
register update through driver.
Now Speaker enable/disable is controlled through codec register updated
by codec driver. This patch reverts gpio logic.
This reverts commit 7fa5c33d04 ("ASoC:
amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine
driver").
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20220516160619.17832-1-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card_jack_new() allowed to create jack kcontrol without pins,
but did not create kcontrols. The jack would not have kcontrols if pins
were not going to be added.
This renames the old snd_soc_card_jack_new() to
snd_soc_card_jack_new_pins() for use when pins are provided or will be
added later. The new snd_soc_card_jack_new() appropriately creates a
jack for use without pins and adds a kcontrol.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Updates for v5.18
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220225112358.19403-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have newer renoir platforms with different codecs combinations.
Add struct in legacy machine driver and add to list of supported
renoir machine to support sound card registration on platform with
rt5682s as primary headset codec and max98360 and rt1019 as speaker
amp codec.
This also fixes error reported by kernel robot:
"error: 'EN_SPKR_GPIO_DW' undeclared here"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220222124213.721224-3-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Co-processor or ACP IP block on AMD's SOC is connected via
PCI bus interface, hence needs to be register as a PCI device. We
have same PCI device ID across multiple SOC's but with different
revision id for PCI hw. Add a generic PCI driver module for ACP
that registers ACP as a PCI device and also register a platform
device based on pci revision id. Any SOC's specific configuration
for ACP block will be done in platform driver probe. We have added
an initial support for ACP revision id 3 or ACP3X device.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220117115854.455995-4-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We're setting wrong card codec conf for rt1019 amp devices in our
machine driver. Due to this left and right amp channels data are
reversed in our machines as wrong device prefix results in wrong
value for "Mono LR Select" rt1019 mixer control. Reverse dev ids
in codec conf with Left and Right name_prefix to fix such issue.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220120133605.476138-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT1019 components was initially registered with i2c1 and i2c2 but
now changed to i2c0 and i2c1 in most of our AMD platforms. Change
default rt1019 components to 10EC1019:00 and 10EC1019:01 which is
aligned with most of AMD machines.
Any exception to rt1019 device ids in near future board design can
be handled using dmi based quirk for that machine.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220106150525.396170-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The acp-platform driver now needs the ACPI helpers:
ld.lld: error: undefined symbol: snd_soc_acpi_find_machine
>>> referenced by acp-platform.c
>>> soc/amd/acp/acp-platform.o:(acp_machine_select) in archive sound/built-in.a
ld.lld: error: undefined symbol: snd_soc_acpi_codec_list
>>> referenced by acp-renoir.c
>>> soc/amd/acp/acp-renoir.o:(snd_soc_acpi_amd_acp_machines) in archive sound/built-in.a
Other drivers using this interface, select SND_SOC_ACPI, so do the
same thing here.
Fixes: e646b51f5d ("ASoC: amd: acp: Add callback for machine driver on ACP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211029113714.966823-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If not all of CONFIG_X86, CONFIG_PCI, and CONFIG_I2C are set:
WARNING: unmet direct dependencies detected for SND_SOC_AMD_MACH_COMMON
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && X86 && PCI [=y] && I2C [=y]
Selected by [y]:
- SND_SOC_AMD_LEGACY_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y]
- SND_SOC_AMD_SOF_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y]
As SND_SOC_AMD_MACH_COMMON depends on X86 && PCI && I2C, all symbols
selecting it should depend on X86 && PCI && I2C, too.
Fixes: 9d8a7be88b ("ASoC: amd: acp: Add legacy sound card support for Chrome audio")
Fixes: 9f84940f50 ("ASoC: amd: acp: Add SOF audio support on Chrome board")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/dfb03bd33117e26f3f04ce227bb28095109b3d80.1635260849.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Chrome board has RT5682 codec and RT1019 amp connected to I2S SP
controller on ACP hw. Also it support DMIC capture endpoints with
inbuilt pdm controller on ACP hw block. Add driver module to create
backend dai links for sof dsp core. We pass driver data with audio
end points configuration to register sound cards and create device
nodes for all audio endpoints.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211019070938.5076-7-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have machines with different audio endpoints configurations
across various distributions. We need to support multiple sound
cards for different combinations of I2S instance and codecs hw.
Now we also need to support SOF-DSP endpoints based sound cards.
All such card combinations slightly differs in terms of machine
ops callback. This patch adds ACP generic machine driver module
that exposes method to create ACP cards dai links and define new
ops for audio endpoints configurations. Initially we have added
dailink support for RT5682 and RT1019 codec connection with ACP
I2S_SP instance. We will add newer codecs in this module to use
this for all AMD's ACP block sound cards supports in future.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211019070938.5076-5-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are using legacy way of exposing dais and DMA configuration that
requires separate driver modules for various ACP SOC with almost
similar hw configuration. Moreover the legacy approach requires
separate I2S and DMA module platform devices registration and need
machine specific quirk to control various I2S endpoints. Add generic
dai driver and platform driver for I2S controller on ACP hw block.
This common framework can be used by various ACP platform devices
that shares common specs.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211019070938.5076-2-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
