Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
The function wait_for_completion_interruptible_timeout will return
-ERESTARTSYS immediately when receiving SIGKILL signal which is sent
by "jffs2_gcd_mtd" during umounting jffs2. This will break the SPI memory
operation because the data transmitting may begin before the command or
address transmitting completes. Use wait_for_completion_timeout to prevent
the process from being interruptible.
Fixes: 67dca5e580 ("spi: spi-mem: Add support for Zynq QSPI controller")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210826005930.20572-1-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently there are two places where the error return variable ret is
being assigned -ETIMEDOUT on timeout errors and this value is not
being returned. Fix this by returning -ETIMEDOUT rather than redundantly
assiging it to ret.
Addresses-Coverity: ("Unused value")
Fixes: 0b89fc0a36 ("spi: rockchip-sfc: add rockchip serial flash controller")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210818141051.36320-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When clearing the chip-select mask, the controller will switch to chip
selecting the native CS0 line. Because the control register chip-select
mask is not updated in a single write this will cause undesirable
chip-selection of CS0 even when requesting to select other native
chip-select lines. This is additionally problematic as the chip-select
may still be asserted. With the ARMADA 38x SoC the controller will
assert both the desired native chip-select and CS0.
To avoid any undesirable behaviour with the chip-select lines, update
the control register with a single write. This avoids selecting CS0 and
causes the (de-)assert to apply at the same time.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Link: https://lore.kernel.org/r/20210816050228.3223661-1-nathan@nathanrossi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX eCSPI errata handling for 5.15:
It includes all required changes for handling i.MX6/7 eCSPI errata
ERR009165, which causes FIFO transfer to be sent twice in DMA mode.
Both SPI and DMA maintainers agree to merge it through arm-soc tree.
* tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dmaengine: imx-sdma: add terminated list for freed descriptor in worker
dmaengine: imx-sdma: add uart rom script
dma: imx-sdma: add i.mx6ul compatible name
dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
spi: imx: remove ERR009165 workaround on i.mx6ul
spi: imx: fix ERR009165
dmaengine: imx-sdma: add mcu_2_ecspi script
dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
dmaengine: imx-sdma: remove duplicated sdma_load_context
Revert "dmaengine: imx-sdma: refine to load context only once"
Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
Link: https://lore.kernel.org/r/20210809071838.GF30984@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix the following waring:
drivers/spi/spi-mxic.c: In function ‘mxic_spi_mem_exec_op’:
drivers/spi/spi-mxic.c:401:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (op->data.dir == SPI_MEM_DATA_IN)
^~
drivers/spi/spi-mxic.c:403:4: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
if (op->data.dtr)
^~
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Zhengxun Li <zhengxunli@mxic.com.tw>
Link: https://lore.kernel.org/r/20210810142405.2221540-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.
For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.
For spi-pic32, this is probably not currently an issue but is still good to
fix though.
Fixes: 1bcb9f8ceb ("spi: spi-pic32: Add PIC32 SPI master driver")
Cc: Purna Chandra Mandal <purna.mandal@microchip.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210810081727.19491-2-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Tegra SPI driver supports runtime PM, which controls the clock
enable state, but the clk is also enabled separately from the RPM
at the driver probe time, and thus, stays always on. Fix it.
Runtime PM now is always available on Tegra, hence there is no need to
check the RPM presence in the driver anymore. Remove these checks.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210731192731.5869-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need the fixes in here as well, and resolves some merge issues with
the mhi codebase.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull spi fixes from Mark Brown:
"A small collection of fixes for SPI, small mostly driver specific
things plus a fix for module autoloading which hadn't been working
properly for DT systems"
* tag 'spi-fix-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Fix check condition for DTR ops
spi: mediatek: Fix fifo transfer
spi: imx: mx51-ecspi: Fix CONFIGREG delay comment
spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculation
spi: update modalias_show after of_device_uevent_modalias support
spi: meson-spicc: fix memory leak in meson_spicc_remove
spi: spi-mux: Add module info needed for autoloading
buswidth and dtr fields in spi_mem_op are only valid when the
corresponding spi_mem_op phase has a non-zero length. For example,
SPI NAND core doesn't set buswidth when using SPI_MEM_OP_NO_ADDR
phase.
Fix the dtr checks in set_protocol() and suppports_mem_op() to
ignore empty spi_mem_op phases, as checking for dtr field in
empty phase will result in false negatives.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20210716232504.182-3-a-nandan@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch modified set_cs_timing parameter, no need pass in spi_delay
to set_cs_timing callback.
By the way, we modified the mediatek and tegra114 spi driver to fix build err.
In mediatek spi driver, We have support set absolute time not clk_count,
and call this function in prepare_message not user's API.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210804133746.6742-1-Mason.Zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
General Electric Healthcare's PPD has a secondary processor from
NXP's Kinetis K20 series. That device has two SPI chip selects:
The main interface's behaviour depends on the loaded firmware
and is currently unused.
The secondary interface can be used to update the firmware using
EzPort protocol. This is implemented by this driver using the
kernel's firmware API. The firmware is being flashed into
non-volatile flash memory, so it is enough to flash it once
and not on every boot. Flashing will wear the flash memory
(it has a life time of at least 10k programming cycles). At
the same time only occasional FW updates are expected (like e.g.
a BIOS update). Thus the firmware update is triggered via sysfs
instead of doing it in the driver's probe routine like many
other drivers.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210802172309.164365-4-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moritz writes:
FPGA Manager changes for 5.15-rc1
FPGA Manager
- Colin's change is a simple spelling cleanup.
DFL
- Martin's fist change exposes DFL feature revision to client drivers
- Martin's second change modifies a SPI driver to populate different
spi_board_info modaliases based on the DFL feature revision
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
spi: spi-altera-dfl: support n5010 feature revision
fpga: dfl: expose feature revision from struct dfl_device
fpga: Fix spelling mistake "eXchnage" -> "exchange" in Kconfig
This series series of patches converts ep93xx to Common Clock Framework.
It consists of preparation patches to use clk_prepare_enable where it is
needed, instead of clk_enable used in ep93xx drivers prior to CCF and
a patch converting mach-ep93xx/clock.c to CCF.
Link: https://lore.kernel.org/patchwork/cover/1445563/
Link: https://lore.kernel.org/patchwork/patch/1435884/
v1->v2:
- added SoB
Alexander Sverdlin (7):
iio: ep93xx: Prepare clock before using it
spi: spi-ep93xx: Prepare clock before using it
Input: ep93xx_keypad: Prepare clock before using it
video: ep93xx: Prepare clock before using it
dmaengine: ep93xx: Prepare clock before using it
ASoC: cirrus: i2s: Prepare clock before using it
pwm: ep93xx: Prepare clock before using it
Nikita Shubin (1):
ep93xx: clock: convert in-place to COMMON_CLK
arch/arm/Kconfig | 2 +-
arch/arm/mach-ep93xx/clock.c | 975 ++++++++++++++-----------
arch/arm/mach-ep93xx/core.c | 2 +-
arch/arm/mach-ep93xx/soc.h | 42 +-
drivers/dma/ep93xx_dma.c | 6 +-
drivers/iio/adc/ep93xx_adc.c | 6 +-
drivers/input/keyboard/ep93xx_keypad.c | 4 +-
drivers/pwm/pwm-ep93xx.c | 12 +-
drivers/spi/spi-ep93xx.c | 4 +-
drivers/video/fbdev/ep93xx-fb.c | 4 +-
sound/soc/cirrus/ep93xx-i2s.c | 12 +-
11 files changed, 605 insertions(+), 464 deletions(-)
base-commit: 64376a981a0e2e57c46efa63197c2ebb7dab35df
--
2.26.2
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework, otherwise the following is visible:
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc
Enabling unprepared ep93xx-spi.0
...
Hardware name: Cirrus Logic EDB9302 Evaluation Board
...
clk_core_enable
clk_core_enable_lock
ep93xx_spi_prepare_hardware
__spi_pump_messages
__spi_sync
spi_sync
spi_sync_transfer.constprop.0
regmap_spi_write
_regmap_raw_write_impl
_regmap_bus_raw_write
_regmap_update_bits
regmap_update_bits_base
cs4271_component_probe
snd_soc_component_probe
soc_probe_component
snd_soc_bind_card
edb93xx_probe
...
spi_master spi0: failed to prepare transfer hardware: -108
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210726140001.24820-3-nikita.shubin@maquefel.me
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 3a70dd2d05 ("spi: mediatek: fix fifo rx mode") claims that
fifo RX mode was never handled, and adds the presumably missing code
to the FIFO transfer function. However, the claim that receive data
was not handled is incorrect. It was handled as part of interrupt
handling after the transfer was complete. The code added with the above
mentioned commit reads data from the receive FIFO before the transfer
is started, which is wrong. This results in an actual transfer error
on a Hayato Chromebook.
Remove the code trying to handle receive data before the transfer is
started to fix the problem.
Fixes: 3a70dd2d05 ("spi: mediatek: fix fifo rx mode")
Cc: Peter Hess <peter.hess@ph-home.de>
Cc: Frank Wunderlich <frank-w@public-files.de>
Cc: Tzung-Bi Shih <tzungbi@google.com>
Cc: Hsin-Yi Wang <hsinyi@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Hsin-Yi Wang <hsinyi@google.com>
Tested-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210802030023.1748777-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The Max10 BMC on the Silicom n5010 PAC is slightly different than the
existing BMCs, so use a dedicated feature revision detect it.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
The spi_imx->spi_bus_clk may be uninitialized and thus also zero in
mx51_ecspi_prepare_message(), which would lead to division by zero
in kernel. Since bitbang .setup_transfer callback which initializes
the spi_imx->spi_bus_clk is called after bitbang prepare_message
callback, iterate over all the transfers in spi_message, find the
one with lowest bus frequency, and use that bus frequency for the
delay calculation.
Note that it is not possible to move this CONFIGREG delay back into
the .setup_transfer callback, because that is invoked too late, after
the GPIO chipselects were already configured.
Fixes: 135cbd378e ("spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210726100102.5188-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and
i.mx8m/8mm still need this errata. Please refer to nxp official
errata document from https://www.nxp.com/ .
For removing workaround on those chips. Add new i.mx6ul type.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull spi fixes from Mark Brown:
"A collection of driver specific fixes, there was a bit of a kerfuffle
with some last minute review on hte spi-cadence-quadspi division by
zero change but otherwise nothing terribly remarkable here - important
fixes if you have the hardware but nothing with too wide an impact"
* tag 'spi-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-bcm2835: Fix deadlock
spi: cadence: Correct initialisation of runtime PM again
spi: cadence-quadspi: Disable Auto-HW polling
spi: spi-cadence-quadspi: Fix division by zero warning
spi: spi-cadence-quadspi: Revert "Fix division by zero warning"
spi: spi-cadence-quadspi: Fix division by zero warning
spi: mediatek: move devm_spi_register_master position
spi: mediatek: fix fifo rx mode
spi: atmel: Fix CS and initialization bug
spi: stm32: fixes pm_runtime calls in probe/remove
spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay
spi: stm32h7: fix full duplex irq handler handling
