Siemens industrial PCs unfortunately can not always be properly
identified the way we used to. An earlier commit introduced code that
allows proper identification without looking at DMI strings that could
differ based on product branding.
Switch over to that proper way and revert commits that used to collect
the machines based on unstable strings.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Fixes: e8796c6c69 ("platform/x86: pmc_atom: Add Siemens CONNECT ...")
Fixes: f110d252ae ("platform/x86: pmc_atom: Add Siemens SIMATIC ...")
Fixes: ad0d315b4d ("platform/x86: pmc_atom: Add Siemens SIMATIC ...")
Tested-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20211213120502.20661-5-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This mainly implements detection of these devices and will allow
secondary drivers to work on such machines.
The identification is DMI-based with a vendor specific way to tell them
apart in a reliable way.
Drivers for LEDs and Watchdogs will follow to make use of that platform
detection.
There is also some code to allow secondary drivers to find GPIO memory,
that needs to be in place because the pinctrl drivers do not come up.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20211213120502.20661-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
While introduction of this menu brings a nice view in the configuration tools,
it brought more issues than solves, i.e. it prevents to locate files in the
intel/ subfolder without touching non-related Kconfig dependencies elsewhere.
Drop X86_PLATFORM_DRIVERS_INTEL altogether.
Note, on x86 it's enabled by default and it's quite unlikely anybody wants to
disable all of the modules in this submenu.
Fixes: 8bd836feb6 ("platform/x86: intel_skl_int3472: Move to intel/ subfolder")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211222194941.76054-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
While introduction of this menu brings a nice view in the configuration tools,
it brought more issues than solves, i.e. it prevents to locate files in the
intel/ subfolder without touching non-related Kconfig dependencies elsewhere.
Drop X86_PLATFORM_DRIVERS_INTEL altogether.
Note, on x86 it's enabled by default and it's quite unlikely anybody wants to
disable all of the modules in this submenu.
Fixes: 8bd836feb6 ("platform/x86: intel_skl_int3472: Move to intel/ subfolder")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211222194941.76054-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Intel Platform Monitoring Technology (PMT) support is indicated by presence
of an Intel defined PCIe Designated Vendor Specific Extended Capabilities
(DVSEC) structure with a PMT specific ID. The current MFD implementation
creates child devices for each PMT feature, currently telemetry, watcher,
and crashlog. However DVSEC structures may also be used by Intel to
indicate support for other features. The Out Of Band Management Services
Module (OOBMSM) uses DVSEC to enumerate several features, including PMT.
In order to support them it is necessary to modify the intel_pmt driver to
handle the creation of the child devices more generically. To that end,
modify the driver to create child devices for any VSEC/DVSEC features on
supported devices (indicated by PCI ID). Additionally, move the
implementation from MFD to the Auxiliary bus. VSEC/DVSEC features are
really multifunctional PCI devices, not platform devices as MFD was
designed for. Auxiliary bus gives more flexibility by allowing the
definition of custom structures that can be shared between associated
auxiliary devices and the parent device. Also, rename the driver from
intel_pmt to intel_vsec to better reflect the purpose.
This series also removes the current runtime pm support which was not
complete to begin with. None of the current devices require runtime pm.
However the support will be replaced when a device is added that requires
it.
Reviewed-by: Mark Gross <markgross@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20211208015015.891275-4-david.e.box@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There needs to be a check to prevent negative offsets for
setting->index. I have reviewed this code and I think that the
"if (block->instance_count <= instance)" check in __query_block() will
prevent this from resulting in an out of bounds access. But it's
still worth fixing.
Fixes: 640a5fa50a ("platform/x86: think-lmi: Opcode support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211217071209.GF26548@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
STB (Smart Trace Buffer), is a debug trace buffer that isolates the
failures by analyzing the last running feature of a system. This
non-intrusive way always runs in the background and stores the trace
into the SoC.
This patch enables the STB feature by passing module param
"enable_stb=1" while loading the driver and provides mechanism to
access the STB buffer using the read and write routines.
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Link: https://lore.kernel.org/r/20211130112318.92850-3-Sanket.Goswami@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed tag for the immutable platform-drivers-x86-int3472 branch
This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
and INT3472 driver patches.
* tag 'platform-drivers-x86-int3472-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: int3472: Deal with probe ordering issues
platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Add get_sensor_adev_and_name() helper
platform/x86: int3472: Split into 2 drivers
platform_data: Add linux/platform_data/tps68470.h file
i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
Signed tag for the immutable platform-drivers-x86-int3472 branch
This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
and INT3472 driver patches.
Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0 ("drm/vc4: fix error code in vc4_create_object()")
Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around this info missing from the ACPI tables on devices where
the int3472 driver is used, the int3472 MFD-cell drivers attach info about
consumers to the clks/regulators when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
All the sensor ACPI fw-nodes have a _DEP dependency on the INT3472 ACPI
fw-node, so to work around these probe ordering issues the ACPI core /
i2c-code does not instantiate the I2C-clients for any ACPI devices
which have a _DEP dependency on an INT3472 ACPI device until all
_DEP-s are met.
This relies on acpi_dev_clear_dependencies() getting called by the driver
for the _DEP-s when they are ready, add a acpi_dev_clear_dependencies()
call to the discrete.c probe code.
In the tps68470 case calling acpi_dev_clear_dependencies() is already done
by the acpi_gpiochip_add() call done by the driver for the GPIO MFD cell
(The GPIO cell is deliberately the last cell created to make sure the
clk + regulator cells are already instantiated when this happens).
However for proper probe ordering, the clk/regulator cells must not just
be instantiated the must be fully ready (the clks + regulators must be
registered with their subsystems).
Add MODULE_SOFTDEP dependencies for the clk and regulator drivers for
the instantiated MFD-cells so that these are loaded before us and so
that they bind immediately when the platform-devs are instantiated.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-12-hdegoede@redhat.com
Pass tps68470_regulator_platform_data to the tps68470-regulator
MFD-cell, specifying the voltages of the various regulators and
tying the regulators to the sensor supplies so that sensors which use
the TPS68470 can find their regulators.
Since the voltages and supply connections are board-specific, this
introduces a DMI matches int3472_tps68470_board_data struct which
contains the necessary per-board info.
This per-board info also includes GPIO lookup information for the
sensor IO lines which may be connected to the tps68470 GPIOs.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-11-hdegoede@redhat.com
The discrete.c code is not the only code which needs to lookup the
acpi_device and device-name for the sensor for which the INT3472
ACPI-device is a GPIO/clk/regulator provider.
The tps68470.c code also needs this functionality, so factor this
out into a new get_sensor_adev_and_name() helper.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-9-hdegoede@redhat.com
The intel_skl_int3472.ko module contains 2 separate drivers,
the int3472_discrete platform driver and the int3472_tps68470
I2C-driver.
These 2 drivers contain very little shared code, only
skl_int3472_get_acpi_buffer() and skl_int3472_fill_cldb() are
shared.
Split the module into 2 drivers, linking the little shared code
directly into both.
This will allow us to add soft-module dependencies for the
tps68470 clk, gpio and regulator drivers to the new
intel_skl_int3472_tps68470.ko to help with probe ordering issues
without causing these modules to get loaded on boards which only
use the int3472_discrete platform driver.
While at it also rename the .c and .h files to remove the
cumbersome intel_skl_int3472_ prefix.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-8-hdegoede@redhat.com
Pull x86 platform driver fixes from Hans de Goede:
"Various bug-fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: hid: add quirk to support Surface Go 3
platform/x86: amd-pmc: Fix s2idle failures on certain AMD laptops
platform/x86: touchscreen_dmi: Add TrekStor SurfTab duo W1 touchscreen info
platform/x86: lg-laptop: Recognize more models
platform/x86: thinkpad_acpi: Add lid_logo_dot to the list of safe LEDs
platform/x86: thinkpad_acpi: Restore missing hotkey_tablet_mode and hotkey_radio_sw sysfs-attr
On the back of the device there is a Hall sensor connected to the
"INT33FF:02" GPIO controller pin 18, which gets triggered when the
device is fully folded into tablet-mode (when the back of the display
touches the back of the keyboard).
Use this to disable both the touch-keyboard and the digitizer when
the tablet is fully folded into tablet-mode.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-5-hdegoede@redhat.com
Add driver to handle WMI events, control the keyboard backlight and
bind/unbind the keyboard-touch / digitizer driver so that only one
is active at a time.
It may seem a bit weird to handle the toggling of the modes in the
kernel, but the hw actually expects only 1 device to be active
at a time.
Changes by Hans de Goede:
- Whole bunch of cleanups
- Make the kernel do the driver bind/unbind itself instead of
sending events to userspace and requiring a special userspace
daemon to deal with this
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-4-hdegoede@redhat.com
The driver core sets struct device->driver before calling out
to the bus' probe() method, this leaves a window where an ACPI
notify may happen on the WMI object before the driver's
probe() method has completed running, causing e.g. the
driver's notify() callback to get called with drvdata
not yet being set leading to a NULL pointer deref.
At a check for this to the WMI core, ensuring that the notify()
callback is not called before the driver is ready.
Fixes: 1686f54445 ("platform/x86: wmi: Incorporate acpi_install_notify_handler")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-2-hdegoede@redhat.com
On some AMD hardware laptops, the system fails communicating with the
PMC when entering s2idle and the machine is battery powered.
Hardware description: HP Pavilion Aero Laptop 13-be0097nr
CPU: AMD Ryzen 7 5800U with Radeon Graphics
GPU: 03:00.0 VGA compatible controller [0300]: Advanced Micro Devices,
Inc. [AMD/ATI] Device [1002:1638] (rev c1)
Detailed description of the problem (and investigation) here:
https://gitlab.freedesktop.org/drm/amd/-/issues/1799
Patch is a single line: reduce the polling delay in half, from 100uSec
to 50uSec when waiting for a change in state from the PMC after a
write command operation.
After changing the delay, I did not see a single failure on this
machine (I have this fix for now more than one week and s2idle worked
every single time on battery power).
Cc: stable@vger.kernel.org
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Fabrizio Bertocci <fabriziobertocci@gmail.com>
Link: https://lore.kernel.org/r/CADtzkx7TdfbwtaVEXUdD6YXPey52E-nZVQNs+Z41DTx7gqMqtw@mail.gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add the LED_RETAIN_AT_SHUTDOWN flag to the registered led_class_devs so
that the LEDs do not get turned-off when reloading the driver and thus so
that they also stay under default EC control when reloading the driver,
unless explicitly overridden by the user.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211123210524.266705-1-hdegoede@redhat.com
On some AMD hardware laptops, the system fails communicating with the
PMC when entering s2idle and the machine is battery powered.
Hardware description: HP Pavilion Aero Laptop 13-be0097nr
CPU: AMD Ryzen 7 5800U with Radeon Graphics
GPU: 03:00.0 VGA compatible controller [0300]: Advanced Micro Devices,
Inc. [AMD/ATI] Device [1002:1638] (rev c1)
Detailed description of the problem (and investigation) here:
https://gitlab.freedesktop.org/drm/amd/-/issues/1799
Patch is a single line: reduce the polling delay in half, from 100uSec
to 50uSec when waiting for a change in state from the PMC after a
write command operation.
After changing the delay, I did not see a single failure on this
machine (I have this fix for now more than one week and s2idle worked
every single time on battery power).
Cc: stable@vger.kernel.org
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Fabrizio Bertocci <fabriziobertocci@gmail.com>
Link: https://lore.kernel.org/r/CADtzkx7TdfbwtaVEXUdD6YXPey52E-nZVQNs+Z41DTx7gqMqtw@mail.gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit c99ca78d67 ("platform/x86: thinkpad_acpi: Switch to common use
of attributes") removed the conditional adding of the
hotkey_tablet_mode and hotkey_radio_sw sysfs-attributes, replacing this
with a hotkey_attr_is_visible() callback which hides them when the
feature is not present.
But this commit forgot to add these 2 attributes to the default
hotkey_attributes[] set, so they would now never get added at all.
Add the 2 attributes to the default hotkey_attributes[] set so that
they are available on systems with these features once more.
Fixes: c99ca78d67 ("platform/x86: thinkpad_acpi: Switch to common use of attributes")
Cc: Len Baker <len.baker@gmx.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211123210424.266607-2-hdegoede@redhat.com
