Pull drm updates from Dave Airlie:
"Intel have enabled DG2 on certain SKUs for laptops, AMD has started
some new GPU support, msm has user allocated VA controls
dma-buf:
- add dma_resv_replace_fences
- add dma_resv_get_singleton
- make dma_excl_fence private
core:
- EDID parser refactorings
- switch drivers to drm_mode_copy/duplicate
- DRM managed mutex initialization
display-helper:
- put HDMI, SCDC, HDCP, DSC and DP into new module
gem:
- rework fence handling
ttm:
- rework bulk move handling
- add common debugfs for resource managers
- convert to kvcalloc
format helpers:
- support monochrome formats
- RGB888, RGB565 to XRGB8888 conversions
fbdev:
- cfb/sys_imageblit fixes
- pagelist corruption fix
- create offb platform device
- deferred io improvements
sysfb:
- Kconfig rework
- support for VESA mode selection
bridge:
- conversions to devm_drm_of_get_bridge
- conversions to panel_bridge
- analogix_dp - autosuspend support
- it66121 - audio support
- tc358767 - DSI to DPI support
- icn6211 - PLL/I2C fixes, DT property
- adv7611 - enable DRM_BRIDGE_OP_HPD
- anx7625 - fill ELD if no monitor
- dw_hdmi - add audio support
- lontium LT9211 support, i.MXMP LDB
- it6505: Kconfig fix, DPCD set power fix
- adv7511 - CEC support for ADV7535
panel:
- ltk035c5444t, B133UAN01, NV3052C panel support
- DataImage FG040346DSSWBG04 support
- st7735r - DT bindings fix
- ssd130x - fixes
i915:
- DG2 laptop PCI-IDs ("motherboard down")
- Initial RPL-P PCI IDs
- compute engine ABI
- DG2 Tile4 support
- DG2 CCS clear color compression support
- DG2 render/media compression formats support
- ATS-M platform info
- RPL-S PCI IDs added
- Bump ADL-P DMC version to v2.16
- Support static DRRS
- Support multiple eDP/LVDS native mode refresh rates
- DP HDR support for HSW+
- Lots of display refactoring + fixes
- GuC hwconfig support and query
- sysfs support for multi-tile
- fdinfo per-client gpu utilisation
- add geometry subslices query
- fix prime mmap with LMEM
- fix vm open count and remove vma refcounts
- contiguous allocation fixes
- steered register write support
- small PCI BAR enablement
- GuC error capture support
- sunset igpu legacy mmap support for newer devices
- GuC version 70.1.1 support
amdgpu:
- Initial SoC21 support
- SMU 13.x enablement
- SMU 13.0.4 support
- ttm_eu cleanups
- USB-C, GPUVM updates
- TMZ fixes for RV
- RAS support for VCN
- PM sysfs code cleanup
- DC FP rework
- extend CG/PG flags to 64-bit
- SI dpm lockdep fix
- runtime PM fixes
amdkfd:
- RAS/SVM fixes
- TLB flush fixes
- CRIU GWS support
- ignore bogus MEC signals more efficiently
msm:
- Fourcc modifier for tiled but not compressed layouts
- Support for userspace allocated IOVA (GPU virtual address)
- DPU: DSC (Display Stream Compression) support
- DP: eDP support
- DP: conversion to use drm_bridge and drm_bridge_connector
- Merge DPU1 and MDP5 MDSS driver
- DPU: writeback support
nouveau:
- make some structures static
- make some variables static
- switch to drm_gem_plane_helper_prepare_fb
radeon:
- misc fixes/cleanups
mxsfb:
- rework crtc mode setting
- LCDIF CRC support
etnaviv:
- fencing improvements
- fix address space collisions
- cleanup MMU reference handling
gma500:
- GEM/GTT improvements
- connector handling fixes
komeda:
- switch to plane reset helper
mediatek:
- MIPI DSI improvements
omapdrm:
- GEM improvements
qxl:
- aarch64 support
vc4:
- add a CL submission tracepoint
- HDMI YUV support
- HDMI/clock improvements
- drop is_hdmi caching
virtio:
- remove restriction of non-zero blob types
vmwgfx:
- support for cursormob and cursorbypass 4
- fence improvements
tidss:
- reset DISPC on startup
solomon:
- SPI support
- DT improvements
sun4i:
- allwinner D1 support
- drop is_hdmi caching
imx:
- use swap() instead of open-coding
- use devm_platform_ioremap_resource
- remove redunant initializations
ast:
- Displayport support
rockchip:
- Refactor IOMMU initialisation
- make some structures static
- replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
- support swapped YUV formats,
- clock improvements
- rk3568 support
- VOP2 support
mediatek:
- MT8186 support
tegra:
- debugabillity improvements"
* tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits)
drm/i915/dsi: fix VBT send packet port selection for ICL+
drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
drm/i915/reg: fix undefined behavior due to shift overflowing the constant
drm/i915/gt: Fix use of static in macro mismatch
drm/i915/audio: fix audio code enable/disable pipe logging
drm/i915: Fix CFI violation with show_dynamic_id()
drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
drm/i915/gt: Fix build error without CONFIG_PM
drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations
drm/msm: don't free the IRQ if it was not requested
drm/msm/dpu: limit writeback modes according to max_linewidth
drm/amd: Don't reset dGPUs if the system is going to s2idle
drm/amdgpu: Unmap legacy queue when MES is enabled
drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
drm/msm: Fix fb plane offset calculation
drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
drm/msm/dsi: don't powerup at modeset time for parade-ps8640
drm/rockchip: Change register space names in vop2
dt-bindings: display: rockchip: make reg-names mandatory for VOP2
...
There are 2 ways an engine can get reset in i915 and the method of reset
affects how KMD labels a context as guilty/innocent.
(1) GuC initiated engine-reset: GuC resets a hung engine and notifies
KMD. The context that hung on the engine is marked guilty and all other
contexts are innocent. The innocent contexts are resubmitted.
(2) GT based reset: When an engine heartbeat fails to tick, KMD
initiates a gt/chip reset. All active contexts are marked as guilty and
discarded.
In order to correctly mark the contexts as guilty/innocent, pass a mask
of engines that were reset to __guc_reset_context.
Fixes: eb5e7da736 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426003045.3929439-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 303760aa91)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Userspace may leave predication enabled upon return from the batch
buffer, which has the consequent of preventing all operation from the
ring from being executed, including all the synchronisation, coherency
control, arbitration and user signaling. This is more than just a local
gpu hang in one client, as the user has the ability to prevent the
kernel from applying critical workarounds and can cause a full GT reset.
We could simply execute MI_SET_PREDICATE upon return from the user
batch, but this has the repercussion of modifying the user's context
state. Instead, we opt to execute a fixup batch which by mixing
predicated operations can determine the state of the
SET_PREDICATE_RESULT register and restore it prior to the next userspace
batch. This allows us to protect the kernel's ring without changing the
uABI.
Suggested-by: Zbigniew Kempczynski <zbigniew.kempczynski@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Zbigniew Kempczynski <zbigniew.kempczynski@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425152317.4275-4-ramalingam.c@intel.com
When bit 19 of MI_LOAD_REGISTER_IMM instruction opcode is set on tgl+
devices, HW does not care about certain register address offsets, but
instead check the following for valid address ranges on specific engines:
RCS && CCS: BITS(0 - 10)
BCS: BITS(0 - 11)
VECS && VCS: BITS(0 - 13)
Also, tgl+ now support relative addressing for BCS engine - So, this
patch fixes issue with live_gt_lrc selftest that is failing where there is
mismatch between LRC register layout generated during init and HW
default register offsets.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425152317.4275-2-ramalingam.c@intel.com
In order to get the GSC Support merged on drm-intel-gt-next
in a clean fashion we needed this ATS-M patch to avoid
conflict in i915_pci.c:
commit 412c942bdf ("drm/i915/ats-m: add ATS-M platform info")
--
Fixing a silent conflict on drivers/gpu/drm/i915/gt/intel_gt_gmch.c:
- if (!intel_vtd_active(i915))
+ if (!i915_vtd_active(i915))
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Initiating a reset when the command streamer is not idle or in the
middle of executing an MI_FORCE_WAKE can result in a hang. Multiple
command streamers can be part of a single reset domain, so resetting one
would mean resetting all command streamers in that domain.
To workaround this, before initiating a reset, ensure that all command
streamers within that reset domain are either IDLE or are not executing
a MI_FORCE_WAKE.
Enable GuC PRE_PARSER WA bit so that GuC follows the WA sequence when
initiating engine-resets.
For gt-resets, ensure that i915 applies the WA sequence.
Opens to address in future patches:
- The part of the WA to wait for pending forcewakes is also applicable
to execlists backend.
- The WA also needs to be applied for gen11
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-3-umesh.nerlige.ramappa@intel.com
The latest GuC firmware drops the context descriptor pool in favour of
passing all creation data in the create H2G. It also greatly simplifies
the work queue and removes the process descriptor used for multi-LRC
submission. So, remove all mention of LRC and process descriptors and
update the registration code accordingly.
Unfortunately, the new API also removes the ability to set default
values for the scheduling policies at context registration time.
Instead, a follow up H2G must be sent. The individual scheduling
policy update H2G commands are also dropped in favour of a single KLV
based H2G. So, change the update wrappers accordingly and call this
during context registration..
Of course, this second H2G per registration might fail due to being
backed up. The registration code has a complicated state machine to
cope with the actual registration call failing. However, if that works
then there is no support for unwinding if a further call should fail.
Unwinding would require sending a H2G to de-register - but that can't
be done because the CTB is already backed up.
So instead, add a new flag to say whether the context has a pending
policy update. This is set if the policy H2G fails at registration
time. The submission code checks for this flag and retries the policy
update if set. If that call fails, the submission path early exists
with a retry error. This is something that is already supported for
other reasons.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220412225955.1802543-2-John.C.Harrison@Intel.com
When we are swapping out the local memory obj on flat-ccs capable platform,
we need to capture the ccs data too along with main meory and we need to
restore it when we are swapping in the content.
When lmem object is swapped into a smem obj, smem obj will
have the extra pages required to hold the ccs data corresponding to the
lmem main memory. So main memory of lmem will be copied into the initial
pages of the smem and then ccs data corresponding to the main memory
will be copied to the subsequent pages of smem. ccs data is 1/256 of
lmem size.
Swapin happens exactly in reverse order. First main memory of lmem is
restored from the smem's initial pages and the ccs data will be restored
from the subsequent pages of smem.
Extracting and restoring the CCS data is done through a special cmd called
XY_CTRL_SURF_COPY_BLT
v2: Fixing the ccs handling
v3: Handle the ccs data at same loop as main memory [Thomas]
v4: changes for emit_copy_ccs
v5: handle non-flat-ccs scenario
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-10-ramalingam.c@intel.com
Xe-HP and latest devices support Flat CCS which reserved a portion of
the device memory to store compression metadata, during the clearing of
device memory buffer object we also need to clear the associated
CCS buffer.
XY_CTRL_SURF_COPY_BLT is a BLT cmd used for reading and writing the
ccs surface of a lmem memory. So on Flat-CCS capable platform we use
XY_CTRL_SURF_COPY_BLT to clear the CCS meta data.
v2: Fixed issues with platform naming [Lucas]
v3: Rebased [Ram]
Used the round_up funcs [Bob]
v4: Fixed ccs blk calculation [Ram]
Added Kdoc on flat-ccs.
v5: GENMASK is used [Matt]
mocs fix [Matt]
Comments Fix [Matt]
Flush address programming [Ram]
v6: FLUSH_DW is fixed
Few coding style fix
v7: Adopting the XY_FAST_COLOR_BLT (Thomas]
v8: XY_CTRL_SURF_COPY_BLT for ccs clearing.
v9: emit_copy_ccs is used.
v10: ctrl_surf cmds are filled in caller itself. [Thomas]
only one ctrl surf cmd is used as size of lmem is <=8M [Thomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-6-ramalingam.c@intel.com
Sync up with v5.18-rc1, in particular to get 5e3094cfd9
("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Freq caps (i.e. RP0, RP1 and RPn frequencies) are read from HW. However the
formats (bit positions, widths, registers and units) of these vary for
different generations with even more variations arriving in the future. In
order not to have to do identical computation for these caps in multiple
places, here we centralize the computation of these caps. This makes the
code cleaner and also more extensible for the future.
v2: Clarify that caps are in "hw units" in comments (Lucas De Marchi)
v3: Minor checkpatch fix
v4: s/intel_rps_get_freq_caps/gen6_rps_get_freq_caps/ (Badal Nilawar)
v5: Changes comments to kernel doc (Anshuman Gupta)
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406191848.20895-1-ashutosh.dixit@intel.com
Some functions defined in the intel-gtt module are used in several
areas, but is only supported on x86 platforms.
By separating these calls and their static underlying functions to
another area, we are able to compile out these functions for
non-x86 builds and provide stubs for the non-x86 implementations.
In addition to the problematic calls, we are moving the gmch-related
functions to the new area.
Signed-off-by: Casey Bowman <casey.g.bowman@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330234809.1218210-2-casey.g.bowman@intel.com
Track context active (on hardware) status together with the start
timestamp.
This will be used to provide better granularity of context
runtime reporting in conjunction with already tracked pphwsp accumulated
runtime.
The latter is only updated on context save so does not give us visibility
to any currently executing work.
As part of the patch the existing runtime tracking data is moved under the
new ce->stats member and updated under the seqlock. This provides the
ability to atomically read out accumulated plus active runtime.
v2:
* Rename and make __intel_context_get_active_time unlocked.
v3:
* Use GRAPHICS_VER.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> # v1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401142205.3123159-6-tvrtko.ursulin@linux.intel.com
GPU hangs have been observed when multiple engines write to the
same aux_inv register at the same time. To avoid this each engine
should only invalidate its own auxiliary table. The function
gen12_emit_flush_xcs() currently invalidate the auxiliary table for
all engines because the rq->engine is not necessarily the engine
eventually carrying out the request, and potentially the engine
could even be a virtual one (with engine->instance being -1).
With the MMIO remap feature, we can actually set bit 17 of MI_LRI
instruction and let the hardware to figure out the local aux_inv
register at runtime to avoid invalidating auxiliary table for all
engines.
Bspec: 45728
v2: Invalidate AUX table for indirect context as well.
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220328171650.1900674-1-fei.yang@intel.com
