When dcn20_clk_src_construct() fails, we need to release clk_src.
Fixes: 6f4e6361c3 ("drm/amd/display: Add Renoir resource (v2)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We normally runtime suspend when there are displays attached if they
are in the DPMS off state, however, if something wakes the GPU
we send a hotplug event on resume (in case any displays were connected
while the GPU was in suspend) which can cause userspace to light
up the displays again soon after they were turned off.
Prior to
commit 087451f372 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's."),
the driver took a runtime pm reference when the fbdev emulation was
enabled because we didn't implement proper shadowing support for
vram access when the device was off so the device never runtime
suspended when there was a console bound. Once that commit landed,
we now utilize the core fb helper implementation which properly
handles the emulation, so runtime pm now suspends in cases where it did
not before. Ultimately, we need to sort out why runtime suspend in not
working in this case for some users, but this should restore similar
behavior to before.
v2: move check into runtime_suspend
v3: wake ups -> wakeups in comment, retain pm_runtime behavior in
runtime_idle callback
Fixes: 087451f372 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Link: https://lore.kernel.org/r/20220403132322.51c90903@darkstar.example.org/
Tested-by: Michele Ballabio <ballabio.m@gmail.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated
each time the queue gets evicted.
Fixes: b8020b0304 ("drm/amdkfd: Enable over-subscription with >1 GWS queue")
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the kzalloc() fails then this code will crash. Return -ENOMEM instead.
Fixes: e50d9ba0d2 ("drm/amdgpu: Add debugfs TA load/unload/invoke support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two error code bugs here. The copy_to/from_user() functions
return the number of bytes remaining (a positive number). We should
return -EFAULT if the copy fails.
Second if we fail because "context.resp_status" is non-zero then return
-EINVAL instead of zero.
Fixes: e50d9ba0d2 ("drm/amdgpu: Add debugfs TA load/unload/invoke support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Allow for PSR SMU optimization and PSR multiple display optimization.
[How]
Add feature flags of PSR smu optimization and PSR multiple display
optimiztaion, and set them during init sequence. By default, flags
are disabled.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without MMHUB clock gating being enabled then MMHUB will not disconnect
from DF and will result in DF C-state entry can't be accessed during S2idle
suspend, and eventually s0ix entry will be blocked.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
drivers/gpu/drm/amd/display/dc/dcn201/dcn201_hwseq.c:98:8-10:
WARNING: possible condition with no effect (if == else)
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gfx_v10_0_ring_test_ib() function uses 20 bytes instead of 16
bytes during the test. The patch sets the size of the allocation to be
4-byte larger to match the actual usage.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Haohui Mai <ricetons@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes the issue where the driver miscomputes the 64-bit
values of the wptr of the SDMA doorbell when initializing the
hardware. SDMA engines v4 and later on have full 64-bit registers for
wptr thus they should be set properly.
Older generation hardwares like CIK / SI have only 16 / 20 / 24bits
for the WPTR, where the calls of lower_32_bits() will be removed in a
following patch.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Haohui Mai <ricetons@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change SVM range mapping flags or access attributes don't trigger
migration, if range is already mapped on GPUs we should update GPU
mapping and pass flush_tlb flag true to amdgpu vm.
Change SVM range preferred_loc or migration granularity don't need
update GPU mapping, skip the validate_and_map.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid unnecessary unmap SVM range from GPUs if range is not mapped on
GPUs when migrating the range. This flag will also be used to flush TLB
when updating the existing mapping on GPUs.
It is protected by prange->migrate_mutex and mmap read lock in MMU
notifier callback.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following Wstringop-overflow warnings when building with GCC-11:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:493:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:493:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:493:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:388:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:388:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:388:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:1491:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2613:25: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2613:25: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=]
by removing the over-specified array size from the argument declarations.
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/181
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
This version brings along following fixes:
- Keep tracking of DSC packed PPS for future use
- Maintain current link settings in link loss interrupt
- Remove DDC write and read size check
- Read PSR-SU cap DPCD for specific panel
- Don't pass HostVM by default on DCN3.1
- Reset cached PSR parameters after hibernate
- Add audio readback registers
- Update dcn315 clk table read
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP compliance test case 400.3.2.3 is failed because in link loss interrupt
the current link settings is not used in the DP link training.
[How]
In link loss interrupt, use the current link settings in the following DP
link training.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Gary Li <garyli12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Customer found I2C over AUX using ADL_Display_DDCBlockAccess_Get
will fail when sending more than 256 bytes of data;
[How]
Remove the write and read size checking to allow sending data more
than 256 bytes;
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
For some specific eDP panel, we'd check the PSR-SU cap during boot
by reading the vendor specific DPCD, otherwise it will cause to
false report the eDP panel which supports PSR-SU as an non-PSR-SU
panel.
- add the vendor specific DPCD address in ddc_service_types header
- if specific eDP panel detected, check vendor specific DPCD for
PSR-SU cap
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
After hibernate system might be using old invalid psr_power_opt and
psr_allow_active that never get reset
[HOW]
Reset cached Panel Self Refresh parameters when PSR is first configured
for eDP in dc_link_setup_psr.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the sequence by making sure clk_mgr always builds a
reasonable clock table regardless of what we read from smu
by moving all defaults from resource soc struct to clk_mgr.
Now the only thing resource soc update does is read
the clock table and apply any DC specific policy decisions
to how clocks are populated in dml soc.
Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MEC firmware sometimes sends signal interrupts without a valid context ID
on end of pipe events that don't intend to signal any HSA signals.
This triggers the slow path in kfd_signal_event_interrupt that scans the
entire event page for signaled events. Detect these signals in the top
half interrupt handler to stop processing them as early as possible.
Because we now always treat event ID 0 as invalid, reserve that ID during
process initialization.
v2: Update firmware version checks to support more GPUs
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move DRM's HMDI helpers into the display/ subdirectoy and add it
to DRM's display helpers. Update all affected drivers. No functional
changes.
The HDMI helpers were implemented in the EDID and connector code, but
are actually unrelated. With the move to the display-helper library, we
can remove the dependency on drm_edid.{c,h} in some driver's HDMI source
files.
Several of the HDMI helpers remain in EDID code because both share parts
of their implementation internally. With better refractoring of the EDID
code, those HDMI helpers could be moved into the display-helper library
as well.
v3:
* fix Kconfig dependencies (Javier)
v2:
* reduce HDMI helpers to avoid exporting functions (Jani)
* fix include statements (Jani, Javier)
* update Kconfig symbols
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-8-tzimmermann@suse.de
Move DRM's HDCP helper library into the display/ subdirectory and add
it to DRM's display helpers. Split the header file into core and helpers.
Update all affected drivers. No functional changes.
v3:
* fix Kconfig dependencies
v2:
* fix include statements (Jani, Javier)
* update Kconfig symbols
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-7-tzimmermann@suse.de
DSC is the Display Stream Compression standard for DisplayPort. Move
the DSC code into display/ and split the header into files for protocol
core and DRM helpers. Adapt all users of the code. No functional
changes.
To avoid the proliferation of Kconfig options, DSC is part of DRM's
support for DisplayPort. If necessary, a new option could make DSC an
independent feature.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-6-tzimmermann@suse.de
Rename dp/ to display/ to account for additional display-related
helpers, such as HDMI. Update all related include statements. No
functional changes.
Various drivers, such as i915 and amdgpu, use similar naming scheme
by putting code for video-output standards into a local display/
directory. The new directory's name is aligned with this convention.
v2:
* update commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
Load ta fw during psp_init_sriov_microcode to enable XGMI.
It is required to be loaded by both guest and host starting
from Arcturus. Cap fw needs to be loaded first.
Signed-off-by: David Yu <David.Yu@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The adev->pm.mutx is already held at the beginning of
amdgpu_dpm_compute_clocks/amdgpu_dpm_enable_uvd/amdgpu_dpm_enable_vce.
But on their calling path, amdgpu_display_bandwidth_update will be
called and thus its sub functions amdgpu_dpm_get_sclk/mclk. They
will then try to acquire the same adev->pm.mutex and deadlock will
occur.
By placing amdgpu_display_bandwidth_update outside of adev->pm.mutex
protection(considering logically they do not need such protection) and
restructuring the call flow accordingly, we can eliminate the deadlock
issue. This comes with no real logics change.
Fixes: 3712e7a494 ("drm/amd/pm: unified lock protections in amdgpu_dpm.c")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Link: https://lore.kernel.org/all/9e689fea-6c69-f4b0-8dee-32c4cf7d8f9c@molgen.mpg.de/
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1957
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fatal error handler is independent from general ras interrupt
handler since there is no related IH ring.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for general RAS poison consumption handler.
v2: remove callback function for poison consumption.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prepare for the implementation of poison consumption handler.
v2: separate umc handler from poison creation.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- In the latest version of the header, there is a variable name change.
This should not cause any backward compatibility since the variable is
at the same offset in the struct.
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When dcn20_clk_src_construct() fails, we need to release clk_src.
Fixes: 6f4e6361c3 ("drm/amd/display: Add Renoir resource (v2)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
