In some configurations, the BAM DMA controller is set up by a remote
processor and the local processor can simply start making use of it
without setting up the BAM. This is already supported using the
"qcom,controlled-remotely" property.
However, for some reason another possible configuration is that the
remote processor is responsible for powering up the BAM, but we are
still responsible for initializing it (e.g. resetting it etc).
This configuration is quite challenging to handle properly because
the power control is handled through separate channels
(e.g. device-specific SMSM interrupts / smem-states). Great care
must be taken to ensure the BAM registers are not accessed while
the BAM is powered off since this results in a bus stall.
Attempt to support this configuration with minimal device-specific
code in the bam_dma driver by tracking the number of requested
channels. Consumers of DMA channels are responsible to only request
DMA channels when the BAM was powered on by the remote processor,
and to release them before the BAM is powered off.
When the first channel is requested the BAM is initialized (reset)
and it is also put into reset when the last channel was released.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20211018102421.19848-3-stephan@gerhold.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Without CONFIG_PM_SLEEP, the runtime suspend/resume functions
are unused, producing a warning:
../drivers/dma/sa11x0-dma.c:1042:12: error: 'sa11x0_dma_resume' defined but not used
../drivers/dma/sa11x0-dma.c:1004:12: error: 'sa11x0_dma_suspend' defined but not used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211026020508.550-1-caihuoqing@baidu.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Don't populate the read-only array ds_lut on the stack but instead it
static. Also makes the object code smaller by 163 bytes:
Before:
text data bss dec hex filename
23508 4796 0 28304 6e90 ./drivers/dma/sh/rz-dmac.o
After:
text data bss dec hex filename
23281 4860 0 28141 6ded ./drivers/dma/sh/rz-dmac.o
(gcc version 11.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210915112038.12407-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The issue happens in an error handling path. If
of_dma_controller_register() fails, the function simply prints error
messages and returns error code, without decrementing the reference
count of pdev->device incremented earlier by
dma_async_device_register(), which may result in refcount leaks.
Fix it by invoking dma_async_device_unregister() before returning the
error code.
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/20210911070533.3114-1-xiongx18@fudan.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210904145813.5161-1-len.baker@gmx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Modify the prototype from xilinx_dma_tx_descriptor to
xilinx_dma_alloc_tx_descriptor and xilinx_dma_channel_set_config
to xilinx_vdma_channel_set_config in API description to
fix below linux kernel-doc warnings.
drivers/dma/xilinx/xilinx_dma.c:800: warning: expecting
prototype for xilinx_dma_tx_descriptor(). Prototype was
for xilinx_dma_alloc_tx_descriptor() instead.
drivers/dma/xilinx/xilinx_dma.c:2471: warning: expecting
prototype for xilinx_dma_channel_set_config(). Prototype
was for xilinx_vdma_channel_set_config() instead.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1631525316-2323-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use the helper macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() instead of the
verbose operators ".suspend_noirq /.resume_noirq/.freeze_noirq/
.thaw_noirq/.poweroff_noirq/.restore_noirq", because the
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is a nice helper macro that could
be brought in to make code a little clearer, a little more concise.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210828090117.1814-1-caihuoqing@baidu.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix following panic on system halt:
Requesting system halt
[ 10.600000] spi spi0.1: spi_device 0.1 cleanup
[ 10.630000] fsl_edma_chan_mux() fsl_chan->edma->n_chans 64 dmamux_nr 0
[ 10.630000] *** ZERO DIVIDE *** FORMAT=4
[ 10.630000] Current process id is 38
[ 10.630000] BAD KERNEL TRAP: 00000000
[ 10.630000] PC: [<402f09ba>] fsl_edma_chan_mux+0x7c/0x12e
...
Some architecture as mcf5441x (ColdFire) may not have
a dmamux, so dmamux_nr is set to 0. This patch considers this case.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Link: https://lore.kernel.org/r/20210901211610.662077-1-angelo.dureghello@timesys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ptdma driver has added debugfs support, but this fails to build
when debugfs is disabled:
drivers/dma/ptdma/ptdma-debugfs.c: In function 'ptdma_debugfs_setup':
drivers/dma/ptdma/ptdma-debugfs.c:93:54: error: 'struct dma_device' has no member named 'dbg_dev_root'
93 | debugfs_create_file("info", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:96:55: error: 'struct dma_device' has no member named 'dbg_dev_root'
96 | debugfs_create_file("stats", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:102:52: error: 'struct dma_device' has no member named 'dbg_dev_root'
102 | debugfs_create_dir("q", pt->dma_dev.dbg_dev_root);
| ^
Remove the #ifdef in the header, as this only saves a few bytes,
but would require ugly #ifdefs in each driver using it.
Simplify the other user while we're at it.
Fixes: e2fb2e2a33 ("dmaengine: ptdma: Add debugfs entries for PTDMA")
Fixes: 26cf132de6 ("dmaengine: Create debug directories for DMA devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210920122017.205975-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The previous commit 059e969c2a ("dmaengine: tegra210-adma: Using
pm_runtime_resume_and_get to replace open coding") forgets to replace
the pm_runtime_get_sync in the tegra_adma_probe, but removes the
pm_runtime_put_noidle.
Fix this by continuing to replace pm_runtime_get_sync with
pm_runtime_resume_and_get in tegra_adma_probe.
Fixes: 059e969c2a ("dmaengine: tegra210-adma: Using pm_runtime_resume_and_get to replace open coding")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20211021030538.3465287-1-mudongliangabcd@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Before the `callback_result` callback was introduced drivers coded their
invocation to the callback in a similar way to:
if (cb->callback) {
spin_unlock(&dma->lock);
cb->callback(cb->callback_param);
spin_lock(&dma->lock);
}
With the introduction of `callback_result` two helpers where introduced to
transparently handle both types of callbacks. And drivers where updated to
look like this:
if (dmaengine_desc_callback_valid(cb)) {
spin_unlock(&dma->lock);
dmaengine_desc_callback_invoke(cb, ...);
spin_lock(&dma->lock);
}
dmaengine_desc_callback_invoke() correctly handles both `callback_result`
and `callback`. But we forgot to update the dmaengine_desc_callback_valid()
function to check for `callback_result`. As a result DMA descriptors that
use the `callback_result` rather than `callback` don't have their callback
invoked by drivers that follow the pattern above.
Fix this by checking for both `callback` and `callback_result` in
dmaengine_desc_callback_valid().
Fixes: f067025bc6 ("dmaengine: add support to provide error result from a DMA transation")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20211023134101.28042-1-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kzalloc() function.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Added support for DMA controller with more than 8 channels.
DMAC register map changes based on number of channels.
Enabling DMAC channel:
DMAC_CHENREG has to be used when number of channels <= 8
DMAC_CHENREG2 has to be used when number of channels > 8
Configuring DMA channel:
CHx_CFG has to be used when number of channels <= 8
CHx_CFG2 has to be used when number of channels > 8
Suspending and resuming channel:
DMAC_CHENREG has to be used when number of channels <= 8 DMAC_CHSUSPREG
has to be used for suspending a channel > 8
Signed-off-by: Pandith N <pandith.n@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211001140812.24977-2-pandith.n@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Theorically, address pointers used by STM32 DMA must be chosen so as to
ensure that all transfers within a burst block are aligned on the address
boundary equal to the size of the transfer.
If this is always the case for peripheral addresses on STM32, it is not for
memory addresses if the user doesn't respect this alignment constraint.
To avoid a weird behavior of the DMA controller in this case (no error
triggered but data are not transferred as expected), force no burst.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211011094259.315023-4-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
memset() and memcpy() on an MMIO region like here results in a
lockup at startup on mpc5200 platform (since this first happens
during probing of the ATA and Ethernet drivers). Use memset_io()
and memcpy_toio() instead.
Fixes: 2f9ea1bde0 ("bestcomm: core bestcomm support for Freescale MPC5200")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Link: https://lore.kernel.org/r/20211014094012.21286-1-agust@denx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
ADMAIF FIFO uses a ring buffer and it is divided amongst the available
channels. The default FIFO size (in multiples of 16 words) of ADMAIF TX/RX
channels is as below:
* On Tegra210,
channel 1 to 2 : size = 3
channel 3 to 10: size = 2
* On Tegra186 and later,
channel 1 to 4 : size = 3
channel 5 to 20: size = 2
As per recommendation from HW, FIFO size of ADMA channel should be same as
the corresponding ADMAIF channel it maps to. FIFO corruption is observed if
the sizes do not match. We are using the default FIFO sizes for ADMAIF and
there is no plan to support any custom values.
Thus at runtime, override the ADMA channel FIFO size value depending on the
corresponding ADMAIF channel.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/1631722025-19873-4-git-send-email-spujar@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The 'has_outstanding_reqs' member description order in structure
'tegra_adma_chip_data' does not match with the corresponding member
declaration. The same is true for member assignment in chip data
structures declared for Tegra210 and Tegra186.
This is a trivial fix to re-order the mentioned member for a better
readability.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/1631722025-19873-2-git-send-email-spujar@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
