At this point the subsystem can enumerate all CXL ports (CXL.mem decode
resources in upstream switch ports and host bridges) in a system. The
last mile is connecting those ports to endpoints.
The cxl_mem driver connects an endpoint device to the platform CXL.mem
protoctol decode-topology. At ->probe() time it walks its
device-topology-ancestry and adds a CXL Port object at every Upstream
Port hop until it gets to CXL root. The CXL root object is only present
after a platform firmware driver registers platform CXL resources. For
ACPI based platform this is managed by the ACPI0017 device and the
cxl_acpi driver.
The ports are registered such that disabling a given port automatically
unregisters all descendant ports, and the chain can only be registered
after the root is established.
Given ACPI device scanning may run asynchronously compared to PCI device
scanning the root driver is tasked with rescanning the bus after the
root successfully probes.
Conversely if any ports in a chain between the root and an endpoint
becomes disconnected it subsequently triggers the endpoint to
unregister. Given lock depenedencies the endpoint unregistration happens
in a workqueue asynchronously. If userspace cares about synchronizing
delayed work after port events the /sys/bus/cxl/flush attribute is
available for that purpose.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[djbw: clarify changelog, rework hotplug support]
Link: https://lore.kernel.org/r/164398782997.903003.9725273241627693186.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
So far the platorm level CXL resources have been enumerated by the
cxl_acpi driver, and cxl_pci has gathered all the pre-requisite
information it needs to fire up a cxl_mem driver. However, the first
thing the cxl_mem driver will be tasked to do is validate that all the
PCIe Switches in its ancestry also have CXL capabilities and an CXL.mem
link established.
Provide a common mechanism for a CXL.mem endpoint driver to enumerate
all the ancestor CXL ports in the topology and validate CXL.mem
connectivity.
Multiple endpoints may end up racing to establish a shared port in the
topology. This race is resolved via taking the device-lock on a parent
CXL Port before establishing a new child. The winner of the race
establishes the port, the loser simply registers its interest in the
port via 'struct cxl_ep' place-holder reference.
At endpoint teardown the same parent port lock is taken as 'struct
cxl_ep' references are deleted. Last endpoint to drop its reference
unregisters the port.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164398731146.902644.1029761300481366248.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Per the CXL specification (8.1.12.2 Memory Device PCIe Capabilities and
Extended Capabilities) the Device Serial Number capability is mandatory.
Emit it for user tooling to identify devices.
It is reasonable to ask whether the attribute should be added to the
list of PCI sysfs device attributes. The PCI layer can optionally emit
it too, but the CXL subsystem is aiming to preserve its independence and
the possibility of CXL topologies with non-PCI devices in it. To date
that has only proven useful for the 'cxl_test' model, but as can be seen
with seen with ACPI0016 devices, sometimes all that is needed is a
platform firmware table to point to CXL Component Registers in MMIO
space to define a "CXL" device.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164366608838.196598.16856227191534267098.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL 2.0 8.1.3.8.2 states:
Memory_Active: When set, indicates that the CXL Range 1 memory is
fully initialized and available for software use. Must be set within
Range 1. Memory_Active_Timeout of deassertion of reset to CXL device
if CXL.mem HwInit Mode=1
Unfortunately, Memory_Active can take quite a long time depending on
media size (up to 256s per 2.0 spec). Provide a callback for the
eventual establishment of CXL.mem operations via the 'cxl_mem' driver
the 'struct cxl_memdev'. The implementation waits for 60s by default for
now and can be overridden by the mbox_ready_time module parameter.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
[djbw: switch to sleeping wait]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164298427373.3018233.9309741847039301834.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Before CXL 2.0 HDM Decoder Capability mechanisms can be utilized in a
device the driver must determine that the device is ready for CXL.mem
operation and that platform firmware, or some other agent, has
established an active decode via the legacy CXL 1.1 decoder mechanism.
This legacy mechanism is defined in the CXL DVSEC as a set of range
registers and status bits that take time to settle after a reset.
Validate the CXL memory decode setup via the DVSEC and cache it for
later consideration by the cxl_mem driver (to be added). Failure to
validate is not fatal to the cxl_pci driver since that is only providing
CXL command support over PCI.mmio, and might be needed to rectify CXL
DVSEC validation problems.
Any potential ranges that the device is already claiming via DVSEC need
to be reconciled with the dynamic provisioning ranges provided by
platform firmware (like ACPI CEDT.CFMWS). Leave that reconciliation to
the cxl_mem driver.
[djbw: shorten defines]
[djbw: change precise spin wait to generous msleep]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
[djbw: clarify changelog]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164375911821.559935.7375160041663453400.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The need for a CXL port driver and a dedicated cxl_bus_type is driven by
a need to simultaneously support 2 independent physical memory decode
domains (cache coherent CXL.mem and uncached PCI.mmio) that also
intersect at a single PCIe device node. A CXL Port is a device that
advertises a CXL Component Register block with an "HDM Decoder
Capability Structure".
>From Documentation/driver-api/cxl/memory-devices.rst:
Similar to how a RAID driver takes disk objects and assembles them into
a new logical device, the CXL subsystem is tasked to take PCIe and ACPI
objects and assemble them into a CXL.mem decode topology. The need for
runtime configuration of the CXL.mem topology is also similar to RAID in
that different environments with the same hardware configuration may
decide to assemble the topology in contrasting ways. One may choose
performance (RAID0) striping memory across multiple Host Bridges and
endpoints while another may opt for fault tolerance and disable any
striping in the CXL.mem topology.
The port driver identifies whether an endpoint Memory Expander is
connected to a CXL topology. If an active (bound to the 'cxl_port'
driver) CXL Port is not found at every PCIe Switch Upstream port and an
active "root" CXL Port then the device is just a plain PCIe endpoint
only capable of participating in PCI.mmio and DMA cycles, not CXL.mem
coherent interleave sets.
The 'cxl_port' driver lets the CXL subsystem leverage driver-core
infrastructure for setup and teardown of register resources and
communicating device activation status to userspace. The cxl_bus_type
can rendezvous the async arrival of platform level CXL resources (via
the 'cxl_acpi' driver) with the asynchronous enumeration of Memory
Expander endpoints, while also implementing a hierarchical locking model
independent of the associated 'struct pci_dev' locking model. The
locking for dport and decoder enumeration is now handled in the core
rather than callers.
For now the port driver only enumerates and registers CXL resources
(downstream port metadata and decoder resources) later it will be used
to take action on its decoders in response to CXL.mem region
provisioning requests.
Note1: cxlpci.h has long depended on pci.h, but port.c was the first to
not include pci.h. Carry that dependency in cxlpci.h.
Note2: cxl port enumeration and probing complicates CXL subsystem init
to the point that it helps to have centralized debug logging of probe
events in cxl_bus_probe().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/164374948116.464348.1772618057599155408.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Unlike the decoder enumeration for "root decoders" described by platform
firmware, standard decoders can be enumerated from the component
registers space once the base address has been identified (via PCI,
ACPI, or another mechanism).
Add common infrastructure for HDM (Host-managed-Device-Memory) Decoder
enumeration and share it between host-bridge, upstream switch port, and
cxl_test defined decoders.
The locking model for switch level decoders is to hold the port lock
over the enumeration. This facilitates moving the dport and decoder
enumeration to a 'port' driver. For now, the only enumerator of decoder
resources is the cxl_acpi root driver.
Co-developed-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164374688404.395335.9239248252443123526.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The core houses infrastructure for decoder resources. A CXL port's
dports are more closely related to decoder infrastructure than topology
enumeration. Implement generic PCI based dport enumeration in the core,
i.e. arrange for existing root port enumeration from cxl_acpi to share
code with switch port enumeration which just amounts to a small
difference in a pci_walk_bus() invocation once the appropriate 'struct
pci_bus' has been retrieved.
Set the convention that decoder objects are registered after all dports
are enumerated. This enables userspace to know when the CXL core is
finished establishing 'dportX' links underneath the 'portX' object.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164368114191.354031.5270501846455462665.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for switch port enumeration while also preserving the
potential for multi-domain / multi-root CXL topologies. Introduce a
'struct device' generic mechanism for retrieving a root CXL port, if one
is registered. Note that the only known multi-domain CXL configurations
are running the cxl_test unit test on a system that also publishes an
ACPI0017 device.
With this in hand the nvdimm-bridge lookup can be with
device_find_child() instead of bus_find_device() + custom mocked lookup
infrastructure in cxl_test.
The mechanism looks for a 2nd level port since the root level topology
is platform-firmware specific and the 2nd level down follows standard
PCIe topology expectations. The cxl_acpi 2nd level is associated with a
PCIe Root Port.
Reported-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164367562182.225521.9488555616768096049.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a helper for converting a PCI enumerated cxl_port into the pci_bus
that hosts its dports. For switch ports this is trivial, but for root
ports there is no generic way to go from a platform defined host bridge
device, like ACPI0016 to its corresponding pci_bus. Rather than spill
ACPI goop outside of the cxl_acpi driver, just arrange for it to
register an xarray translation from the uport device to the
corresponding pci_bus.
This is in preparation for centralizing dport enumeration in the core.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/164364745633.85488.9744017377155103992.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Lockdep reports:
======================================================
WARNING: possible circular locking dependency detected
5.16.0-rc1+ #142 Tainted: G OE
------------------------------------------------------
cxl/1220 is trying to acquire lock:
ffff979b85475460 (kn->active#144){++++}-{0:0}, at: __kernfs_remove+0x1ab/0x1e0
but task is already holding lock:
ffff979b87ab38e8 (&dev->lockdep_mutex#2/4){+.+.}-{3:3}, at: cxl_remove_ep+0x50c/0x5c0 [cxl_core]
...where cxl_remove_ep() is a helper that wants to delete ports while
holding a lock on the host device for that port. That sets up a lockdep
violation whereby target_list_show() can not rely holding the decoder's
device lock while walking the target_list. Switch to a dedicated seqlock
for this purpose.
Reported-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164367209095.208169.1171673319121271280.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add wrappers for the creation of decoder objects at the root level and
switch level, and keep the core helper private to cxl/core/port.c. Root
decoders are static descriptors conveyed from platform firmware (e.g.
ACPI CFMWS). Switch decoders are CXL standard decoders enumerated via
the HDM decoder capability structure. The base address for the HDM
decoder capability structure may be conveyed either by PCIe or platform
firmware (ACPI CEDT.CHBS).
Additionally, the kdoc descriptions for these helpers and their
dependencies is updated.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
[djbw: fixup changelog, clarify kdoc]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164366463014.111117.9714595404002687111.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This implements the TODO in cxl_acpi for mapping component registers.
cxl_acpi becomes the second consumer of CXL register block enumeration
(cxl_pci being the first). Moving the functionality to cxl_core allows
both of these drivers to use the functionality. Equally importantly it
allows cxl_core to use the functionality in the future.
CXL 2.0 root ports are similar to CXL 2.0 Downstream Ports with the main
distinction being they're a part of the CXL 2.0 host bridge. While
mapping their component registers is not immediately useful for the CXL
drivers, the movement of register block enumeration into core is a vital
step towards HDM decoder programming.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[djbw: fix cxl_regmap_to_base() failure cases]
Link: https://lore.kernel.org/r/164298415080.3018233.14694957480228676592.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Device status can change without warning at any point in time. This
effectively means that no amount of status checking before a command is
submitted can guarantee that the device is not in an error condition
when the command is later submitted. The clearest signal that a device
is not able to process commands is if it fails to process commands.
With the above understanding in hand, update cxl_pci_setup_mailbox() to
validate the readiness of the mailbox once at the beginning of time, and
then use timeouts and busy sequencing errors as the only occasions to
report status.
Just as before, unless and until the driver gains a reset recovery path,
doorbell clearing failures by the device are fatal to mailbox
operations.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164298413480.3018233.9643395389297971819.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The original driver implementation used the doorbell timeout for the
Mailbox Interface Ready bit to piggy back off of, since the latter does
not have a defined timeout. This functionality, introduced in commit
8adaf747c9 ("cxl/mem: Find device capabilities"), needs improvement as
the recent "Add Mailbox Ready Time" ECN timeout indicates that the
mailbox ready time can be significantly longer that 2 seconds.
While the specification limits the maximum timeout to 256s, the cxl_pci
driver gives up on the mailbox after 60s. This value corresponds with
important timeout values already present in the kernel. A module
parameter is provided as an emergency override and represents the
default Linux policy for all devices.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[djbw: add modparam, drop check_device_status()]
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/164367306565.208548.1932299464604450843.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit 48667f6761 ("cxl/core: Split decoder setup into alloc + add")
aimed to fix a large stack frame warning but from v5 to v6, it
introduced a new instance of the warning due to allocating
cxld_const_init on the stack, which was done due to the use of const on
the nr_target member of the cxl_decoder struct. With ARCH=arm
allmodconfig minus CONFIG_KASAN:
GCC 11.2.0:
drivers/cxl/core/bus.c: In function ‘cxl_decoder_alloc’:
drivers/cxl/core/bus.c:523:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
523 | }
| ^
cc1: all warnings being treated as errors
Clang 12.0.1:
drivers/cxl/core/bus.c:486:21: error: stack frame size of 1056 bytes in function 'cxl_decoder_alloc' [-Werror,-Wframe-larger-than=]
struct cxl_decoder *cxl_decoder_alloc(struct cxl_port *port, int nr_targets)
^
1 error generated.
Revert that part of the change, which makes the stack frame of
cxl_decoder_alloc() much more reasonable.
Fixes: 48667f6761 ("cxl/core: Split decoder setup into alloc + add")
Link: https://github.com/ClangBuiltLinux/linux/issues/1539
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211210213627.2477370-1-nathan@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A test of the form:
while true; do modprobe -r cxl_pmem; modprobe cxl_pmem; done
May lead to a crash signature of the form:
BUG: unable to handle page fault for address: ffffffffc0660030
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
[..]
Workqueue: cxl_pmem 0xffffffffc0660030
RIP: 0010:0xffffffffc0660030
Code: Unable to access opcode bytes at RIP 0xffffffffc0660006.
[..]
Call Trace:
? process_one_work+0x4ec/0x9c0
? pwq_dec_nr_in_flight+0x100/0x100
? rwlock_bug.part.0+0x60/0x60
? worker_thread+0x2eb/0x700
In that report the 0xffffffffc0660030 address corresponds to the former
function address of cxl_nvb_update_state() from a previous load of the
module, not the current address. Fix that by arranging for ->state_work
in the 'struct cxl_nvdimm_bridge' object to be reinitialized on cxl_pmem
module reload.
Details:
Recall that CXL subsystem wants to link a CXL memory expander device to
an NVDIMM sub-hierarchy when both a persistent memory range has been
registered by the CXL platform driver (cxl_acpi) *and* when that CXL
memory expander has published persistent memory capacity (Get Partition
Info). To this end the cxl_nvdimm_bridge driver arranges to rescan the
CXL bus when either of those conditions change. The helper
bus_rescan_devices() can not be called underneath the device_lock() for
any device on that bus, so the cxl_nvdimm_bridge driver uses a workqueue
for the rescan.
Typically a driver allocates driver data to hold a 'struct work_struct'
for a driven device, but for a workqueue that may run after ->remove()
returns, driver data will have been freed. The 'struct
cxl_nvdimm_bridge' object holds the state and work_struct directly.
Unfortunately it was only arranging for that infrastructure to be
initialized once per device creation rather than the necessary once per
workqueue (cxl_pmem_wq) creation.
Introduce is_cxl_nvdimm_bridge() and cxl_nvdimm_bridge_reset() in
support of invalidating stale references to a recently destroyed
cxl_pmem_wq.
Cc: <stable@vger.kernel.org>
Fixes: 8fdcb1704f ("cxl/pmem: Add initial infrastructure for pmem support")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/163665474585.3505991.8397182770066720755.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
During NUMA init, CXL memory defined in the SRAT Memory Affinity
subtable may be assigned to a NUMA node. Since there is no
requirement that the SRAT be comprehensive for CXL memory another
mechanism is needed to assign NUMA nodes to CXL memory not identified
in the SRAT.
Use the CXL Fixed Memory Window Structure (CFMWS) of the ACPI CXL
Early Discovery Table (CEDT) to find all CXL memory ranges.
Create a NUMA node for each CFMWS that is not already assigned to
a NUMA node. Add a memblk attaching its host physical address
range to the node.
Note that these ranges may not actually map any memory at boot time.
They may describe persistent capacity or may be present to enable
hot-plug.
Consumers can use phys_to_target_node() to discover the NUMA node.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/163553711933.2509508.2203471175679990.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The 'struct cxl_mem' object actually represents the state of a CXL
device within the driver. Comments indicating that 'struct cxl_mem' is a
device itself are incorrect. It is data layered on top of a CXL Memory
Expander class device. Rename it 'struct cxl_dev_state'. The 'struct'
cxl_memdev' structure represents a Linux CXL memory device object, and
it uses services and information provided by 'struct cxl_dev_state'.
Update the structure name, function names, and the kdocs to reflect the
real uses of this structure.
Some helper functions that were previously prefixed "cxl_mem_" are
renamed to just "cxl_".
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20211102202901.3675568-3-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull cxl updates from Dan Williams:
"More preparation and plumbing work in the CXL subsystem.
From an end user perspective the highlight here is lighting up the CXL
Persistent Memory related commands (label read / write) with the
generic ioctl() front-end in LIBNVDIMM.
Otherwise, the ability to instantiate new persistent and volatile
memory regions is still on track for v5.17.
Summary:
- Fix support for platforms that do not enumerate every ACPI0016 (CXL
Host Bridge) in the CHBS (ACPI Host Bridge Structure).
- Introduce a common pci_find_dvsec_capability() helper, clean up
open coded implementations in various drivers.
- Add 'cxl_test' for regression testing CXL subsystem ABIs.
'cxl_test' is a module built from tools/testing/cxl/ that mocks up
a CXL topology to augment the nascent support for emulation of CXL
devices in QEMU.
- Convert libnvdimm to use the uuid API.
- Complete the definition of CXL namespace labels in libnvdimm.
- Tunnel libnvdimm label operations from nd_ioctl() back to the CXL
mailbox driver. Enable 'ndctl {read,write}-labels' for CXL.
- Continue to sort and refactor functionality into distinct driver
and core-infrastructure buckets. For example, mailbox handling is
now a generic core capability consumed by the PCI and cxl_test
drivers"
* tag 'cxl-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (34 commits)
ocxl: Use pci core's DVSEC functionality
cxl/pci: Use pci core's DVSEC functionality
PCI: Add pci_find_dvsec_capability to find designated VSEC
cxl/pci: Split cxl_pci_setup_regs()
cxl/pci: Add @base to cxl_register_map
cxl/pci: Make more use of cxl_register_map
cxl/pci: Remove pci request/release regions
cxl/pci: Fix NULL vs ERR_PTR confusion
cxl/pci: Remove dev_dbg for unknown register blocks
cxl/pci: Convert register block identifiers to an enum
cxl/acpi: Do not fail cxl_acpi_probe() based on a missing CHBS
cxl/pci: Disambiguate cxl_pci further from cxl_mem
Documentation/cxl: Add bus internal docs
cxl/core: Split decoder setup into alloc + add
tools/testing/cxl: Introduce a mock memory device + driver
cxl/mbox: Move command definitions to common location
cxl/bus: Populate the target list at decoder create
tools/testing/cxl: Introduce a mocked-up CXL port hierarchy
cxl/pmem: Add support for multiple nvdimm-bridge objects
cxl/pmem: Translate NVDIMM label commands to CXL label commands
...
In preparation for moving parts of register mapping to cxl_core, split
cxl_pci_setup_regs() into a helper that finds register blocks,
(cxl_find_regblock()), and a generic wrapper that probes the precise
register sets within a block (cxl_setup_regs()).
Move the actual mapping (cxl_map_regs()) of the only register-set that
cxl_pci cares about (memory device registers) up a level from the former
cxl_pci_setup_regs() into cxl_pci_probe().
With this change the unused component registers are no longer mapped,
but the helpers are primed to move into the core.
[djbw: drop cxl_map_regs() for component registers]
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
[djbw: rebase on the cxl_register_map refactor]
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163434053788.914258.18412599112859205220.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
