Pull misc x86 updates from Borislav Petkov:
"The pile which we cannot find the proper topic for so we stick it in
x86/misc:
- Add support for decoding instructions which do MMIO accesses in
order to use it in SEV and TDX guests
- An include fix and reorg to allow for removing set_fs in UML later"
* tag 'x86_misc_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Remove the mtrr_bp_init() stub
x86/sev-es: Use insn_decode_mmio() for MMIO implementation
x86/insn-eval: Introduce insn_decode_mmio()
x86/insn-eval: Introduce insn_get_modrm_reg_ptr()
x86/insn-eval: Handle insn_get_opcode() failure
Pull x86 mm updates from Borislav Petkov:
- Flush *all* mappings from the TLB after switching to the trampoline
pagetable to prevent any stale entries' presence
- Flush global mappings from the TLB, in addition to the CR3-write,
after switching off of the trampoline_pgd during boot to clear the
identity mappings
- Prevent instrumentation issues resulting from the above changes
* tag 'x86_mm_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Prevent early boot triple-faults with instrumentation
x86/mm: Include spinlock_t definition in pgtable.
x86/mm: Flush global TLB when switching to trampoline page-table
x86/mm/64: Flush global TLB on boot and AP bringup
x86/realmode: Add comment for Global bit usage in trampoline_pgd
x86/mm: Add missing <asm/cpufeatures.h> dependency to <asm/page_64.h>
Pull x86 SGX updates from Borislav Petkov:
- Add support for handling hw errors in SGX pages: poisoning,
recovering from poison memory and error injection into SGX pages
- A bunch of changes to the SGX selftests to simplify and allow of SGX
features testing without the need of a whole SGX software stack
- Add a sysfs attribute which is supposed to show the amount of SGX
memory in a NUMA node, similar to what /proc/meminfo is to normal
memory
- The usual bunch of fixes and cleanups too
* tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/sgx: Fix NULL pointer dereference on non-SGX systems
selftests/sgx: Fix corrupted cpuid macro invocation
x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node
x86/sgx: Fix minor documentation issues
selftests/sgx: Add test for multiple TCS entry
selftests/sgx: Enable multiple thread support
selftests/sgx: Add page permission and exception test
selftests/sgx: Rename test properties in preparation for more enclave tests
selftests/sgx: Provide per-op parameter structs for the test enclave
selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed
selftests/sgx: Move setup_test_encl() to each TEST_F()
selftests/sgx: Encpsulate the test enclave creation
selftests/sgx: Dump segments and /proc/self/maps only on failure
selftests/sgx: Create a heap for the test enclave
selftests/sgx: Make data measurement for an enclave segment optional
selftests/sgx: Assign source for each segment
selftests/sgx: Fix a benign linker warning
x86/sgx: Add check for SGX pages to ghes_do_memory_failure()
x86/sgx: Add hook to error injection address validation
x86/sgx: Hook arch_memory_failure() into mainline code
...
Pull x86 resource control fixlet from Borislav Petkov:
"A minor code cleanup removing a redundant assignment"
* tag 'x86_cache_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Remove redundant assignment to variable chunks
Pull x86 SEV updates from Borislav Petkov:
"The accumulated pile of x86/sev generalizations and cleanups:
- Share the SEV string unrolling logic with TDX as TDX guests need it
too
- Cleanups and generalzation of code shared by SEV and TDX"
* tag 'x86_sev_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Move common memory encryption code to mem_encrypt.c
x86/sev: Rename mem_encrypt.c to mem_encrypt_amd.c
x86/sev: Use CC_ATTR attribute to generalize string I/O unroll
x86/sev: Remove do_early_exception() forward declarations
x86/head64: Carve out the guest encryption postprocessing into a helper
x86/sev: Get rid of excessive use of defines
x86/sev: Shorten GHCB terminate macro names
Pull x86 fpu update from Borislav Petkov:
"A single x86/fpu update for 5.17:
- Exclude AVX opmask registers use from AVX512 state tracking as they
don't contribute to frequency throttling"
* tag 'x86_fpu_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Correct AVX512 state tracking
Merge cpuidle updates, PM core updates and one hiberation-related
update for 5.17-rc1:
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
* pm-cpuidle:
cpuidle: use default_groups in kobj_type
cpuidle: Fix cpuidle_remove_state_sysfs() kerneldoc comment
cpuidle: menu: Fix typo in a comment
* pm-core:
PM: runtime: Simplify locking in pm_runtime_put_suppliers()
mmc: mxc: Use the new PM macros
mmc: jz4740: Use the new PM macros
PM: runtime: Add safety net to supplier device release
PM: runtime: Capture device status before disabling runtime PM
PM: core: Add new *_PM_OPS macros, deprecate old ones
PM: core: Redefine pm_ptr() macro
r8169: Avoid misuse of pm_ptr() macro
* pm-sleep:
PM: hibernate: Allow ACPI hardware signature to be honoured
Pull arm64 updates from Catalin Marinas:
- KCSAN enabled for arm64.
- Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD.
- Some more SVE clean-ups and refactoring in preparation for SME
support (scalable matrix extensions).
- BTI clean-ups (SYM_FUNC macros etc.)
- arm64 atomics clean-up and codegen improvements.
- HWCAPs for FEAT_AFP (alternate floating point behaviour) and
FEAT_RPRESS (increased precision of reciprocal estimate and
reciprocal square root estimate).
- Use SHA3 instructions to speed-up XOR.
- arm64 unwind code refactoring/unification.
- Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP ==
1 (potentially set by a hypervisor; user-space already does this).
- Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU,
Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups.
- Other fixes and clean-ups; highlights: fix the handling of erratum
1418040, correct the calculation of the nomap region boundaries,
introduce io_stop_wc() mapped to the new DGH instruction (data
gathering hint).
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
arm64: Use correct method to calculate nomap region boundaries
arm64: Drop outdated links in comments
arm64: perf: Don't register user access sysctl handler multiple times
drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
arm64: errata: Fix exec handling in erratum 1418040 workaround
arm64: Unhash early pointer print plus improve comment
asm-generic: introduce io_stop_wc() and add implementation for ARM64
arm64: Ensure that the 'bti' macro is defined where linkage.h is included
arm64: remove __dma_*_area() aliases
docs/arm64: delete a space from tagged-address-abi
arm64: Enable KCSAN
kselftest/arm64: Add pidbench for floating point syscall cases
arm64/fp: Add comments documenting the usage of state restore functions
kselftest/arm64: Add a test program to exercise the syscall ABI
kselftest/arm64: Allow signal tests to trigger from a function
kselftest/arm64: Parameterise ptrace vector length information
arm64/sve: Minor clarification of ABI documentation
arm64/sve: Generalise vector length configuration prctl() for SME
arm64/sve: Make sysctl interface for SVE reusable by SME
...
KVM requires a clear separation of host user space and guest permissions
for dynamic XSTATE components.
Add a guest permissions member to struct fpu and a separate set of prctl()
arguments: ARCH_GET_XCOMP_GUEST_PERM and ARCH_REQ_XCOMP_GUEST_PERM.
The semantics are equivalent to the host user space permission control
except for the following constraints:
1) Permissions have to be requested before the first vCPU is created
2) Permissions are frozen when the first vCPU is created to ensure
consistency. Any attempt to expand permissions via the prctl() after
that point is rejected.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
== Problem ==
Nathan Chancellor reported an oops when aceessing the
'sgx_total_bytes' sysfs file:
https://lore.kernel.org/all/YbzhBrimHGGpddDM@archlinux-ax161/
The sysfs output code accesses the sgx_numa_nodes[] array
unconditionally. However, this array is allocated during SGX
initialization, which only occurs on systems where SGX is
supported.
If the sysfs file is accessed on systems without SGX support,
sgx_numa_nodes[] is NULL and an oops occurs.
== Solution ==
To fix this, hide the entire nodeX/x86/ attribute group on
systems without SGX support using the ->is_visible attribute
group callback.
Unfortunately, SGX is initialized via a device_initcall() which
occurs _after_ the ->is_visible() callback. Instead of moving
SGX initialization earlier, call sysfs_update_group() during
SGX initialization to update the group visiblility.
This update requires moving the SGX sysfs code earlier in
sgx/main.c. There are no code changes other than the addition of
arch_update_sysfs_visibility() and a minor whitespace fixup to
arch_node_attr_is_visible() which checkpatch caught.
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-sgx@vger.kernel.org
Cc: x86@kernel.org
Fixes: 50468e4313 ("x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/20220104171527.5E8416A8@davehans-spike.ostc.intel.com
I made the actual CPU bringup go nice and fast... and then Linux spends
half a minute printing stupid nonsense about clocks and steal time for
each of 256 vCPUs. Don't do that. Nobody cares.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211209150938.3518-12-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current EPB "normal" is defined as 6 and set whenever power-up EPB
value is 0. This setting resulted in the desired out of box power and
performance for several CPU generations. But this value is not suitable
for AlderLake mobile CPUs, as this resulted in higher uncore power.
Since EPB is model specific, this is not unreasonable to have different
behavior.
Allow a capability where "normal" EPB can be redefined. For AlderLake
mobile CPUs this desired normal value is 7.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A contrived zero-length write, for example, by using write(2):
...
ret = write(fd, str, 0);
...
to the "flags" file causes:
BUG: KASAN: stack-out-of-bounds in flags_write
Write of size 1 at addr ffff888019be7ddf by task writefile/3787
CPU: 4 PID: 3787 Comm: writefile Not tainted 5.16.0-rc7+ #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
due to accessing buf one char before its start.
Prevent such out-of-bounds access.
[ bp: Productize into a proper patch. Link below is the next best
thing because the original mail didn't get archived on lore. ]
Fixes: 0451d14d05 ("EDAC, mce_amd_inj: Modify flags attribute to use string arguments")
Signed-off-by: Zhang Zixun <zhang133010@icloud.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/linux-edac/YcnePfF1OOqoQwrX@zn.tnic/
Add an IS_ENABLED() check in setup_arch() and call pat_disable()
directly if MTRRs are not supported. This allows to remove the
<asm/memtype.h> include in <asm/mtrr.h>, which pull in lowlevel x86
headers that should not be included for UML builds and will cause build
warnings with a following patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211215165612.554426-2-hch@lst.de
AMD systems currently lay out MCA bank types such that the type of bank
number "i" is either the same across all CPUs or is Reserved/Read-as-Zero.
For example:
Bank # | CPUx | CPUy
0 LS LS
1 RAZ UMC
2 CS CS
3 SMU RAZ
Future AMD systems will lay out MCA bank types such that the type of
bank number "i" may be different across CPUs.
For example:
Bank # | CPUx | CPUy
0 LS LS
1 RAZ UMC
2 CS NBIO
3 SMU RAZ
Change the structures that cache MCA bank types to be per-CPU and update
smca_get_bank_type() to handle this change.
Move some SMCA-specific structures to amd.c from mce.h, since they no
longer need to be global.
Break out the "count" for bank types from struct smca_hwid, since this
should provide a per-CPU count rather than a system-wide count.
Apply the "const" qualifier to the struct smca_hwid_mcatypes array. The
values in this array should not change at runtime.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211216162905.4132657-3-yazen.ghannam@amd.com
Add HWID and McaType values for new SMCA bank types, and add their error
descriptions to edac_mce_amd.
The "PHY" bank types all have the same error descriptions, and the NBIF
and SHUB bank types have the same error descriptions. So reuse the same
arrays where appropriate.
[ bp: Remove useless comments over hwid types. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211216162905.4132657-2-yazen.ghannam@amd.com
Commit in Fixes added a global TLB flush on the early boot path, after
the kernel switches off of the trampoline page table.
Compiler profiling options enabled with GCOV_PROFILE add additional
measurement code on clang which needs to be initialized prior to
use. The global flush in x86_64_start_kernel() happens before those
initializations can happen, leading to accessing invalid memory.
GCOV_PROFILE builds with gcc are still ok so this is clang-specific.
The second issue this fixes is with KASAN: for a similar reason,
kasan_early_init() needs to have happened before KASAN-instrumented
functions are called.
Therefore, reorder the flush to happen after the KASAN early init
and prevent the compilers from adding profiling instrumentation to
native_write_cr4().
Fixes: f154f29085 ("x86/mm/64: Flush global TLB on boot and AP bringup")
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Carel Si <beibei.si@intel.com>
Tested-by: "J. Bruce Fields" <bfields@fieldses.org>
Link: https://lore.kernel.org/r/20211209144141.GC25654@xsang-OptiPlex-9020
hyperv Isolation VM requires bounce buffer support to copy
data from/to encrypted memory and so enable swiotlb force
mode to use swiotlb bounce buffer for DMA transaction.
In Isolation VM with AMD SEV, the bounce buffer needs to be
accessed via extra address space which is above shared_gpa_boundary
(E.G 39 bit address line) reported by Hyper-V CPUID ISOLATION_CONFIG.
The access physical address will be original physical address +
shared_gpa_boundary. The shared_gpa_boundary in the AMD SEV SNP
spec is called virtual top of memory(vTOM). Memory addresses below
vTOM are automatically treated as private while memory above
vTOM is treated as shared.
Swiotlb bounce buffer code calls set_memory_decrypted()
to mark bounce buffer visible to host and map it in extra
address space via memremap. Populate the shared_gpa_boundary
(vTOM) via swiotlb_unencrypted_base variable.
The map function memremap() can't work in the early place
(e.g ms_hyperv_init_platform()) and so call swiotlb_update_mem_
attributes() in the hyperv_init().
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211213071407.314309-4-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyper-V provides Isolation VM for confidential computing support and
guest memory is encrypted in it. Places checking cc_platform_has()
with GUEST_MEM_ENCRYPT attr should return "True" in Isolation VM.
Hyper-V Isolation VMs need to adjust the SWIOTLB size just like SEV
guests. Add a hyperv_cc_platform_has() variant which enables that.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211213071407.314309-3-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
drm/i915 feature pull #2 for v5.17:
Features and functionality:
- Add eDP privacy screen support (Hans)
- Add Raptor Lake S (RPL-S) support (Anusha)
- Add CD clock squashing support (Mika)
- Properly support ADL-P without force probe (Clint)
- Enable pipe color support (10 bit gamma) for display 13 platforms (Uma)
- Update ADL-P DMC firmware to v2.14 (Madhumitha)
Refactoring and cleanups:
- More FBC refactoring preparing for multiple FBC instances (Ville)
- Plane register cleanups (Ville)
- Header refactoring and include cleanups (Jani)
- Crtc helper and vblank wait function cleanups (Jani, Ville)
- Move pipe/transcoder/abox masks under intel_device_info.display (Ville)
Fixes:
- Add a delay to let eDP source OUI write take effect (Lyude)
- Use div32 version of MPLLB word clock for UHBR on SNPS PHY (Jani)
- Fix DMC firmware loader overflow check (Harshit Mogalapalli)
- Fully disable FBC on FIFO underruns (Ville)
- Disable FBC with double wide pipe as mutually exclusive (Ville)
- DG2 workarounds (Matt)
- Non-x86 build fixes (Siva)
- Fix HDR plane max width for NV12 (Vidya)
- Disable IRQ for selftest timestamp calculation (Anshuman)
- ADL-P VBT DDC pin mapping fix (Tejas)
Merges:
- Backmerge drm-next for privacy screen plumbing (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87ee6f5h9u.fsf@intel.com
There are 4 users of mc146818_get_time() and none of them was checking
the return value from this function. Change this.
Print the appropriate warnings in callers of mc146818_get_time() instead
of in the function mc146818_get_time() itself, in order not to add
strings to rtc-mc146818-lib.c, which is kind of a library.
The callers of alpha_rtc_read_time() and cmos_read_time() may use the
contents of (struct rtc_time *) even when the functions return a failure
code. Therefore, set the contents of (struct rtc_time *) to 0x00,
which looks more sensible then 0xff and aligns with the (possibly
stale?) comment in cmos_read_time:
/*
* If pm_trace abused the RTC for storage, set the timespec to 0,
* which tells the caller that this RTC value is unusable.
*/
For consistency, do this in mc146818_get_time().
Note: hpet_rtc_interrupt() may call mc146818_get_time() many times a
second. It is very unlikely, though, that the RTC suddenly stops
working and mc146818_get_time() would consistently fail.
Only compile-tested on alpha.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-alpha@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210200131.153887-4-mat.jonczyk@o2.pl
The memory reservation in arch/x86/platform/efi/efi.c depends on at
least two command line parameters. Put it back later in the boot process
and move efi_memblock_x86_reserve_range() out of early_memory_reserve().
An attempt to fix this was done in
8d48bf8206 ("x86/boot: Pull up cmdline preparation and early param parsing")
but that caused other troubles so it got reverted.
The bug this is addressing is:
Dan reports that Anjaneya Chagam can no longer use the efi=nosoftreserve
kernel command line parameter to suppress "soft reservation" behavior.
This is due to the fact that the following call-chain happens at boot:
early_reserve_memory
|-> efi_memblock_x86_reserve_range
|-> efi_fake_memmap_early
which does
if (!efi_soft_reserve_enabled())
return;
and that would have set EFI_MEM_NO_SOFT_RESERVE after having parsed
"nosoftreserve".
However, parse_early_param() gets called *after* it, leading to the boot
cmdline not being taken into account.
See also https://lore.kernel.org/r/e8dd8993c38702ee6dd73b3c11f158617e665607.camel@intel.com
[ bp: Turn into a proper patch. ]
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211213112757.2612-4-bp@alien8.de
This reverts commit 8d48bf8206.
It turned out to be a bad idea as it broke supplying mem= cmdline
parameters due to parse_memopt() requiring preparatory work like setting
up the e820 table in e820__memory_setup() in order to be able to exclude
the range specified by mem=.
Pulling that up would've broken Xen PV again, see threads at
https://lkml.kernel.org/r/20210920120421.29276-1-jgross@suse.com
due to xen_memory_setup() needing the first reservations in
early_reserve_memory() - kernel and initrd - to have happened already.
This could be fixed again by having Xen do those reservations itself...
Long story short, revert this and do a simpler fix in a later patch.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211213112757.2612-3-bp@alien8.de
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
add_taint() is yet another external facility which the #MC handler
calls. Move that tainting call into the instrumentation-allowed part of
the handler.
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0x617: call to add_taint() leaves .noinstr.text section
While at it, allow instrumentation around the mce_log() call.
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0x690: call to mce_log() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-11-bp@alien8.de
And allow instrumentation inside it because it does calls to other
facilities which will not be tagged noinstr.
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xc73: call to mce_panic() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-8-bp@alien8.de
Mark all the MCE severity computation logic noinstr and allow
instrumentation when it "calls out".
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xc5d: call to mce_severity() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-7-bp@alien8.de
Instead, sandwitch around the call which is done in noinstr context and
mark the caller - mce_gather_info() - as noinstr.
Also, document what the whole instrumentation strategy with #MC is going
to be in the future and where it all is supposed to be going to.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-5-bp@alien8.de
