Commit 0bf6276392 ("x32: Warn and disable rather than error if
binutils too old") added a small test in arch/x86/Makefile because
binutils 2.22 or newer is needed to properly support elf32-x86-64. This
check is no longer necessary, as the minimum supported version of
binutils is 2.23, which is enforced at configuration time with
scripts/min-tool-version.sh.
Remove this check and replace all uses of CONFIG_X86_X32 with
CONFIG_X86_X32_ABI, as two symbols are no longer necessary.
[nathan: Rebase, fix up a few places where CONFIG_X86_X32 was still
used, and simplify commit message to satisfy -tip requirements]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220314194842.3452-2-nathan@kernel.org
Objtool's --ibt option generates .ibt_endbr_seal which lists
superfluous ENDBR instructions. That is those instructions for which
the function is never indirectly called.
Overwrite these ENDBR instructions with a NOP4 such that these
function can never be indirect called, reducing the number of viable
ENDBR targets in the kernel.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.822545231@infradead.org
Kernel entry points should be having ENDBR on for IBT configs.
The SYSCALL entry points are found through taking their respective
address in order to program them in the MSRs, while the exception
entry points are found through UNWIND_HINT_IRET_REGS.
The rule is that any UNWIND_HINT_IRET_REGS at sym+0 should have an
ENDBR, see the later objtool ibt validation patch.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.933157479@infradead.org
Even though Xen currently doesn't advertise IBT, prepare for when it
will eventually do so and sprinkle the ENDBR dust accordingly.
Even though most of the entry points are IRET like, the CPL0
Hypervisor can set WAIT-FOR-ENDBR and demand ENDBR at these sites.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.873919996@infradead.org
Add Kconfig, Makefile and basic instruction support for x86 IBT.
(Ab)use __DISABLE_EXPORTS to disable IBT since it's already employed
to mark compressed and purgatory. Additionally mark realmode with it
as well to avoid inserting ENDBR instructions there. While ENDBR is
technically a NOP, inserting them was causing some grief due to code
growth. There's also a problem with using __noendbr in code compiled
without -fcf-protection=branch.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.519875203@infradead.org
init_freq_invariance_cppc() was called in acpi_cppc_processor_probe(),
after CPU performance information and controls were populated from the
per-cpu _CPC objects.
But these _CPC objects provide information that helps with both CPU
(u-arch) and frequency invariance. Therefore, change the function name
to a more generic one, while adding the arch_ prefix, as this function
is expected to be defined differently by different architectures.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The init_freq_invariance_cppc code actually doesn't need the SMP
functionality. So setting the CONFIG_SMP as the check condition for
init_freq_invariance_cppc may cause the confusion to misunderstand the
CPPC. And the x86 CPPC file is better space to store the CPPC related
functions, while the init_freq_invariance_cppc is out of smpboot, that
means, the CONFIG_SMP won't be mandatory condition any more. And It's more
clear than before.
Signed-off-by: Huang Rui <ray.huang@amd.com>
[ rjw: Subject adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function init_freq_invariance will be used on x86 CPPC, so expose it in
the topology header.
Signed-off-by: Huang Rui <ray.huang@amd.com>
[ rjw: Subject adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The AMD maximum frequency ratio setting function depends on CPPC, so the
x86 CPPC implementation file is better space for this function.
Signed-off-by: Huang Rui <ray.huang@amd.com>
[ rjw: Subject adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Expand KVM's mask for the AVIC host physical ID to the full 12 bits defined
by the architecture. The number of bits consumed by hardware is model
specific, e.g. early CPUs ignored bits 11:8, but there is no way for KVM
to enumerate the "true" size. So, KVM must allow using all bits, else it
risks rejecting completely legal x2APIC IDs on newer CPUs.
This means KVM relies on hardware to not assign x2APIC IDs that exceed the
"true" width of the field, but presumably hardware is smart enough to tie
the width to the max x2APIC ID. KVM also relies on hardware to support at
least 8 bits, as the legacy xAPIC ID is writable by software. But, those
assumptions are unavoidable due to the lack of any way to enumerate the
"true" width.
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Fixes: 44a95dae1d ("KVM: x86: Detect and Initialize AVIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220211000851.185799-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the system worker threads to zap the roots invalidated
by the TDP MMU's "fast zap" mechanism, implemented by
kvm_tdp_mmu_invalidate_all_roots().
At this point, apart from allowing some parallelism in the zapping of
roots, the workqueue is a glorified linked list: work items are added and
flushed entirely within a single kvm->slots_lock critical section. However,
the workqueue fixes a latent issue where kvm_mmu_zap_all_invalidated_roots()
assumes that it owns a reference to all invalid roots; therefore, no
one can set the invalid bit outside kvm_mmu_zap_all_fast(). Putting the
invalidated roots on a linked list... erm, on a workqueue ensures that
tdp_mmu_zap_root_work() only puts back those extra references that
kvm_mmu_zap_all_invalidated_roots() had gifted to it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull x86 spectre fixes from Borislav Petkov:
- Mitigate Spectre v2-type Branch History Buffer attacks on machines
which support eIBRS, i.e., the hardware-assisted speculation
restriction after it has been shown that such machines are vulnerable
even with the hardware mitigation.
- Do not use the default LFENCE-based Spectre v2 mitigation on AMD as
it is insufficient to mitigate such attacks. Instead, switch to
retpolines on all AMD by default.
- Update the docs and add some warnings for the obviously vulnerable
cmdline configurations.
* tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Warn about eIBRS + LFENCE + Unprivileged eBPF + SMT
x86/speculation: Warn about Spectre v2 LFENCE mitigation
x86/speculation: Update link to AMD speculation whitepaper
x86/speculation: Use generic retpoline by default on AMD
x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting
Documentation/hw-vuln: Update spectre doc
x86/speculation: Add eIBRS + Retpoline options
x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE
Recent Fam19h EPYC server line of processors from AMD support system
management functionality via HSMP (Host System Management Port) interface.
The Host System Management Port (HSMP) is an interface to provide
OS-level software with access to system management functions via a
set of mailbox registers.
More details on the interface can be found in chapter
"7 Host System Management Port (HSMP)" of the following PPR
https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip
This patch adds new amd_hsmp module under the drivers/platforms/x86/
which creates miscdevice with an IOCTL interface to the user space.
/dev/hsmp is for running the hsmp mailbox commands.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Nathan Fontenot <nathan.fontenot@amd.com>
Link: https://lore.kernel.org/r/20220222050501.18789-1-nchatrad@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Zap only obsolete roots when responding to zapping a single root shadow
page. Because KVM keeps root_count elevated when stuffing a previous
root into its PGD cache, shadowing a 64-bit guest means that zapping any
root causes all vCPUs to reload all roots, even if their current root is
not affected by the zap.
For many kernels, zapping a single root is a frequent operation, e.g. in
Linux it happens whenever an mm is dropped, e.g. process exits, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These functions only operate on a given MMU, of which there is more
than one in a vCPU (we care about two, because the third does not have
any roots and is only used to walk guest page tables). They do need a
struct kvm in order to lock the mmu_lock, but they do not needed anything
else in the struct kvm_vcpu. So, pass the vcpu->kvm directly to them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The root_hpa and root_pgd fields form essentially a struct kvm_mmu_root_info.
Use the struct to have more consistency between mmu->root and
mmu->prev_roots.
The patch is entirely search and replace except for cached_root_available,
which does not need a temporary struct kvm_mmu_root_info anymore.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new capability, KVM_CAP_PMU_CAPABILITY, that takes a bitmask of
settings/features to allow userspace to configure PMU virtualization on
a per-VM basis. For now, support a single flag, KVM_PMU_CAP_DISABLE,
to allow disabling PMU virtualization for a VM even when KVM is configured
with enable_pmu=true a module level.
To keep KVM simple, disallow changing VM's PMU configuration after vCPUs
have been created.
Signed-off-by: David Dunn <daviddunn@google.com>
Message-Id: <20220223225743.2703915-2-daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cast kvm_x86_ops.func to 'void *' when updating KVM static calls that are
conditionally patched to __static_call_return0(). clang complains about
using mismatching pointers in the ternary operator, which breaks the
build when compiling with CONFIG_KVM_WERROR=y.
>> arch/x86/include/asm/kvm-x86-ops.h:82:1: warning: pointer type mismatch
('bool (*)(struct kvm_vcpu *)' and 'void *') [-Wpointer-type-mismatch]
Fixes: 5be2226f41 ("KVM: x86: allow defining return-0 static calls")
Reported-by: Like Xu <like.xu.linux@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Message-Id: <20220223162355.3174907-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are many different ways that access_ok() is defined across
architectures, but in the end, they all just compare against the
user_addr_max() value or they accept anything.
Provide one definition that works for most architectures, checking
against TASK_SIZE_MAX for user processes or skipping the check inside
of uaccess_kernel() sections.
For architectures without CONFIG_SET_FS(), this should be the fastest
check, as it comes down to a single comparison of a pointer against a
compile-time constant, while the architecture specific versions tend to
do something more complex for historic reasons or get something wrong.
Type checking for __user annotations is handled inconsistently across
architectures, but this is easily simplified as well by using an inline
function that takes a 'const void __user *' argument. A handful of
callers need an extra __user annotation for this.
Some architectures had trick to use 33-bit or 65-bit arithmetic on the
addresses to calculate the overflow, however this simpler version uses
fewer registers, which means it can produce better object code in the
end despite needing a second (statically predicted) branch.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64, asm-generic]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nine architectures are still missing __{get,put}_kernel_nofault:
alpha, ia64, microblaze, nds32, nios2, openrisc, sh, sparc32, xtensa.
Add a generic version that lets everything use the normal
copy_{from,to}_kernel_nofault() code based on these, removing the last
use of get_fs()/set_fs() from architecture-independent code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The way that access_ok() is defined on x86 is slightly different from
most other architectures, and a bit more complex.
The generic version tends to result in the best output on all
architectures, as it results in single comparison against a constant
limit for calls with a known size.
There are a few callers of __range_not_ok(), all of which use TASK_SIZE
as the limit rather than TASK_SIZE_MAX, but I could not see any reason
for picking this. Changing these to call __access_ok() instead uses the
default limit, but keeps the behavior otherwise.
x86 is the only architecture with a WARN_ON_IN_IRQ() checking
access_ok(), but it's probably best to leave that in place.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The __range_not_ok() helper is an x86 (and sparc64) specific interface
that does roughly the same thing as __access_ok(), but with different
calling conventions.
Change this to use the normal interface in order for consistency as we
clean up all access_ok() implementations.
This changes the limit from TASK_SIZE to TASK_SIZE_MAX, which Al points
out is the right thing do do here anyway.
The callers have to use __access_ok() instead of the normal access_ok()
though, because on x86 that contains a WARN_ON_IN_IRQ() check that cannot
be used inside of NMI context while tracing.
The check in copy_code() is not needed any more, because this one is
already done by copy_from_user_nmi().
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/lkml/YgsUKcXGR7r4nINj@zeniv-ca.linux.org.uk/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull kvm fixes from Paolo Bonzini:
"x86 host:
- Expose KVM_CAP_ENABLE_CAP since it is supported
- Disable KVM_HC_CLOCK_PAIRING in TSC catchup mode
- Ensure async page fault token is nonzero
- Fix lockdep false negative
- Fix FPU migration regression from the AMX changes
x86 guest:
- Don't use PV TLB/IPI/yield on uniprocessor guests
PPC:
- reserve capability id (topic branch for ppc/kvm)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled
KVM: x86/mmu: make apf token non-zero to fix bug
KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3
x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU
x86/kvm: Fix compilation warning in non-x86_64 builds
x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0
x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0
kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode
KVM: Fix lockdep false negative during host resume
KVM: x86: Add KVM_CAP_ENABLE_CAP to x86
The kernel provides infrastructure to set or clear the encryption mask
from the pages for AMD SEV, but TDX requires few tweaks.
- TDX and SEV have different requirements to the cache and TLB
flushing.
- TDX has own routine to notify VMM about page encryption status change.
Modify __set_memory_enc_pgtable() and make it flexible enough to cover
both AMD SEV and Intel TDX. The AMD-specific behavior is isolated in the
callbacks under x86_platform.guest. TDX will provide own version of said
callbacks.
[ bp: Beat into submission. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20220223043528.2093214-1-brijesh.singh@amd.com
AMD SME/SEV uses a bit in the page table entries to indicate that the
page is encrypted and not accessible to the VMM.
TDX uses a similar approach, but the polarity of the mask is opposite to
AMD: if the bit is set the page is accessible to VMM.
Provide vendor-neutral API to deal with the mask: cc_mkenc() and
cc_mkdec() modify given address to make it encrypted/decrypted. It can
be applied to phys_addr_t, pgprotval_t or page table entry value.
pgprot_encrypted() and pgprot_decrypted() reimplemented using new
helpers.
The implementation will be extended to cover TDX.
pgprot_decrypted() is used by drivers (i915, virtio_gpu, vfio).
cc_mkdec() called by pgprot_decrypted(). Export cc_mkdec().
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220222185740.26228-5-kirill.shutemov@linux.intel.com
The kernel derives the confidential computing platform
type it is running as from sme_me_mask on AMD or by using
hv_is_isolation_supported() on HyperV isolation VMs. This detection
process will be more complicated as more platforms get added.
Declare a confidential computing vendor variable explicitly and set it
via cc_set_vendor() on the respective platform.
[ bp: Massage commit message, fixup HyperV check. ]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220222185740.26228-4-kirill.shutemov@linux.intel.com
This allows code sharing between fast-headers tree and the vanilla
scheduler tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
New conflicts in sched/core due to the following upstream fixes:
44585f7bc0 ("psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n")
a06247c680 ("psi: Fix uaf issue when psi trigger is destroyed while being polled")
Conflicts:
include/linux/psi_types.h
kernel/sched/psi.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thanks to the chaps at VUsec it is now clear that eIBRS is not
sufficient, therefore allow enabling of retpolines along with eIBRS.
Add spectre_v2=eibrs, spectre_v2=eibrs,lfence and
spectre_v2=eibrs,retpoline options to explicitly pick your preferred
means of mitigation.
Since there's new mitigations there's also user visible changes in
/sys/devices/system/cpu/vulnerabilities/spectre_v2 to reflect these
new mitigations.
[ bp: Massage commit message, trim error messages,
do more precise eIBRS mode checking. ]
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Patrick Colp <patrick.colp@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
The RETPOLINE_AMD name is unfortunate since it isn't necessarily
AMD only, in fact Hygon also uses it. Furthermore it will likely be
sufficient for some Intel processors. Therefore rename the thing to
RETPOLINE_LFENCE to better describe what it is.
Add the spectre_v2=retpoline,lfence option as an alias to
spectre_v2=retpoline,amd to preserve existing setups. However, the output
of /sys/devices/system/cpu/vulnerabilities/spectre_v2 will be changed.
[ bp: Fix typos, massage. ]
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Currently sched_dynamic_update needs to open-code the enabled/disabled
function names for each preemption model it supports, when in practice
this is a boolean enabled/disabled state for each function.
Make this clearer and avoid repetition by defining the enabled/disabled
states at the function definition, and using helper macros to perform the
static_call_update(). Where x86 currently overrides the enabled
function, it is made to provide both the enabled and disabled states for
consistency, with defaults provided by the core code otherwise.
In subsequent patches this will allow us to support PREEMPT_DYNAMIC
without static calls.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20220214165216.2231574-3-mark.rutland@arm.com
Remove mmu_audit.c and all its collateral, the auditing code has suffered
severe bitrot, ironically partly due to shadow paging being more stable
and thus not benefiting as much from auditing, but mostly due to TDP
supplanting shadow paging for non-nested guests and shadowing of nested
TDP not heavily stressing the logic that is being audited.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
