* kvm-arm64/per-vcpu-host-pmu-data:
: .
: Pass the host PMU state in the vcpu to avoid the use of additional
: shared memory between EL1 and EL2 (this obviously only applies
: to nVHE and Protected setups).
:
: Patches courtesy of Fuad Tabba.
: .
KVM: arm64: pmu: Restore compilation when HW_PERF_EVENTS isn't selected
KVM: arm64: Reenable pmu in Protected Mode
KVM: arm64: Pass pmu events to hyp via vcpu
KVM: arm64: Repack struct kvm_pmu to reduce size
KVM: arm64: Wrapper for getting pmu_events
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that the pmu code does not access hyp data, reenable it in
protected mode.
Once fully supported, protected VMs will not have pmu support,
since that could leak information. However, non-protected VMs in
protected mode should have pmu support if available.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-5-tabba@google.com
kvm->arch.arm_pmu is set when userspace attempts to set the first PMU
attribute. As certain attributes are mandatory, arm_pmu ends up always
being set to a valid arm_pmu, otherwise KVM will refuse to run the VCPU.
However, this only happens if the VCPU has the PMU feature. If the VCPU
doesn't have the feature bit set, kvm->arch.arm_pmu will be left
uninitialized and equal to NULL.
KVM doesn't do ID register emulation for 32-bit guests and accesses to the
PMU registers aren't gated by the pmu_visibility() function. This is done
to prevent injecting unexpected undefined exceptions in guests which have
detected the presence of a hardware PMU. But even though the VCPU feature
is missing, KVM still attempts to emulate certain aspects of the PMU when
PMU registers are accessed. This leads to a NULL pointer dereference like
this one, which happens on an odroid-c4 board when running the
kvm-unit-tests pmu-cycle-counter test with kvmtool and without the PMU
feature being set:
[ 454.402699] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000150
[ 454.405865] Mem abort info:
[ 454.408596] ESR = 0x96000004
[ 454.411638] EC = 0x25: DABT (current EL), IL = 32 bits
[ 454.416901] SET = 0, FnV = 0
[ 454.419909] EA = 0, S1PTW = 0
[ 454.423010] FSC = 0x04: level 0 translation fault
[ 454.427841] Data abort info:
[ 454.430687] ISV = 0, ISS = 0x00000004
[ 454.434484] CM = 0, WnR = 0
[ 454.437404] user pgtable: 4k pages, 48-bit VAs, pgdp=000000000c924000
[ 454.443800] [0000000000000150] pgd=0000000000000000, p4d=0000000000000000
[ 454.450528] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 454.456036] Modules linked in:
[ 454.459053] CPU: 1 PID: 267 Comm: kvm-vcpu-0 Not tainted 5.18.0-rc4 #113
[ 454.465697] Hardware name: Hardkernel ODROID-C4 (DT)
[ 454.470612] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 454.477512] pc : kvm_pmu_event_mask.isra.0+0x14/0x74
[ 454.482427] lr : kvm_pmu_set_counter_event_type+0x2c/0x80
[ 454.487775] sp : ffff80000a9839c0
[ 454.491050] x29: ffff80000a9839c0 x28: ffff000000a83a00 x27: 0000000000000000
[ 454.498127] x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000a510000
[ 454.505198] x23: ffff000000a83a00 x22: ffff000003b01000 x21: 0000000000000000
[ 454.512271] x20: 000000000000001f x19: 00000000000003ff x18: 0000000000000000
[ 454.519343] x17: 000000008003fe98 x16: 0000000000000000 x15: 0000000000000000
[ 454.526416] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 454.533489] x11: 000000008003fdbc x10: 0000000000009d20 x9 : 000000000000001b
[ 454.540561] x8 : 0000000000000000 x7 : 0000000000000d00 x6 : 0000000000009d00
[ 454.547633] x5 : 0000000000000037 x4 : 0000000000009d00 x3 : 0d09000000000000
[ 454.554705] x2 : 000000000000001f x1 : 0000000000000000 x0 : 0000000000000000
[ 454.561779] Call trace:
[ 454.564191] kvm_pmu_event_mask.isra.0+0x14/0x74
[ 454.568764] kvm_pmu_set_counter_event_type+0x2c/0x80
[ 454.573766] access_pmu_evtyper+0x128/0x170
[ 454.577905] perform_access+0x34/0x80
[ 454.581527] kvm_handle_cp_32+0x13c/0x160
[ 454.585495] kvm_handle_cp15_32+0x1c/0x30
[ 454.589462] handle_exit+0x70/0x180
[ 454.592912] kvm_arch_vcpu_ioctl_run+0x1c4/0x5e0
[ 454.597485] kvm_vcpu_ioctl+0x23c/0x940
[ 454.601280] __arm64_sys_ioctl+0xa8/0xf0
[ 454.605160] invoke_syscall+0x48/0x114
[ 454.608869] el0_svc_common.constprop.0+0xd4/0xfc
[ 454.613527] do_el0_svc+0x28/0x90
[ 454.616803] el0_svc+0x34/0xb0
[ 454.619822] el0t_64_sync_handler+0xa4/0x130
[ 454.624049] el0t_64_sync+0x18c/0x190
[ 454.627675] Code: a9be7bfd 910003fd f9000bf3 52807ff3 (b9415001)
[ 454.633714] ---[ end trace 0000000000000000 ]---
In this particular case, Linux hasn't detected the presence of a hardware
PMU because the PMU node is missing from the DTB, so userspace would have
been unable to set the VCPU PMU feature even if it attempted it. What
happens is that the 32-bit guest reads ID_DFR0, which advertises the
presence of the PMU, and when it tries to program a counter, it triggers
the NULL pointer dereference because kvm->arch.arm_pmu is NULL.
kvm-arch.arm_pmu was introduced by commit 46b1878214 ("KVM: arm64:
Keep a per-VM pointer to the default PMU"). Until that commit, this
error would be triggered instead:
[ 73.388140] ------------[ cut here ]------------
[ 73.388189] Unknown PMU version 0
[ 73.390420] WARNING: CPU: 1 PID: 264 at arch/arm64/kvm/pmu-emul.c:36 kvm_pmu_event_mask.isra.0+0x6c/0x74
[ 73.399821] Modules linked in:
[ 73.402835] CPU: 1 PID: 264 Comm: kvm-vcpu-0 Not tainted 5.17.0 #114
[ 73.409132] Hardware name: Hardkernel ODROID-C4 (DT)
[ 73.414048] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 73.420948] pc : kvm_pmu_event_mask.isra.0+0x6c/0x74
[ 73.425863] lr : kvm_pmu_event_mask.isra.0+0x6c/0x74
[ 73.430779] sp : ffff80000a8db9b0
[ 73.434055] x29: ffff80000a8db9b0 x28: ffff000000dbaac0 x27: 0000000000000000
[ 73.441131] x26: ffff000000dbaac0 x25: 00000000c600000d x24: 0000000000180720
[ 73.448203] x23: ffff800009ffbe10 x22: ffff00000b612000 x21: 0000000000000000
[ 73.455276] x20: 000000000000001f x19: 0000000000000000 x18: ffffffffffffffff
[ 73.462348] x17: 000000008003fe98 x16: 0000000000000000 x15: 0720072007200720
[ 73.469420] x14: 0720072007200720 x13: ffff800009d32488 x12: 00000000000004e6
[ 73.476493] x11: 00000000000001a2 x10: ffff800009d32488 x9 : ffff800009d32488
[ 73.483565] x8 : 00000000ffffefff x7 : ffff800009d8a488 x6 : ffff800009d8a488
[ 73.490638] x5 : ffff0000f461a9d8 x4 : 0000000000000000 x3 : 0000000000000001
[ 73.497710] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000dbaac0
[ 73.504784] Call trace:
[ 73.507195] kvm_pmu_event_mask.isra.0+0x6c/0x74
[ 73.511768] kvm_pmu_set_counter_event_type+0x2c/0x80
[ 73.516770] access_pmu_evtyper+0x128/0x16c
[ 73.520910] perform_access+0x34/0x80
[ 73.524532] kvm_handle_cp_32+0x13c/0x160
[ 73.528500] kvm_handle_cp15_32+0x1c/0x30
[ 73.532467] handle_exit+0x70/0x180
[ 73.535917] kvm_arch_vcpu_ioctl_run+0x20c/0x6e0
[ 73.540489] kvm_vcpu_ioctl+0x2b8/0x9e0
[ 73.544283] __arm64_sys_ioctl+0xa8/0xf0
[ 73.548165] invoke_syscall+0x48/0x114
[ 73.551874] el0_svc_common.constprop.0+0xd4/0xfc
[ 73.556531] do_el0_svc+0x28/0x90
[ 73.559808] el0_svc+0x28/0x80
[ 73.562826] el0t_64_sync_handler+0xa4/0x130
[ 73.567054] el0t_64_sync+0x1a0/0x1a4
[ 73.570676] ---[ end trace 0000000000000000 ]---
[ 73.575382] kvm: pmu event creation failed -2
The root cause remains the same: kvm->arch.pmuver was never set to
something sensible because the VCPU feature itself was never set.
The odroid-c4 is somewhat of a special case, because Linux doesn't probe
the PMU. But the above errors can easily be reproduced on any hardware,
with or without a PMU driver, as long as userspace doesn't set the PMU
feature.
Work around the fact that KVM advertises a PMU even when the VCPU feature
is not set by gating all PMU emulation on the feature. The guest can still
access the registers without KVM injecting an undefined exception.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425145530.723858-1-alexandru.elisei@arm.com
Userspace can assign a PMU to a VCPU with the KVM_ARM_VCPU_PMU_V3_SET_PMU
device ioctl. If the VCPU is scheduled on a physical CPU which has a
different PMU, the perf events needed to emulate a guest PMU won't be
scheduled in and the guest performance counters will stop counting. Treat
it as an userspace error and refuse to run the VCPU in this situation.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-7-alexandru.elisei@arm.com
When KVM creates an event and there are more than one PMUs present on the
system, perf_init_event() will go through the list of available PMUs and
will choose the first one that can create the event. The order of the PMUs
in this list depends on the probe order, which can change under various
circumstances, for example if the order of the PMU nodes change in the DTB
or if asynchronous driver probing is enabled on the kernel command line
(with the driver_async_probe=armv8-pmu option).
Another consequence of this approach is that on heteregeneous systems all
virtual machines that KVM creates will use the same PMU. This might cause
unexpected behaviour for userspace: when a VCPU is executing on the
physical CPU that uses this default PMU, PMU events in the guest work
correctly; but when the same VCPU executes on another CPU, PMU events in
the guest will suddenly stop counting.
Fortunately, perf core allows user to specify on which PMU to create an
event by using the perf_event_attr->type field, which is used by
perf_init_event() as an index in the radix tree of available PMUs.
Add the KVM_ARM_VCPU_PMU_V3_CTRL(KVM_ARM_VCPU_PMU_V3_SET_PMU) VCPU
attribute to allow userspace to specify the arm_pmu that KVM will use when
creating events for that VCPU. KVM will make no attempt to run the VCPU on
the physical CPUs that share the PMU, leaving it up to userspace to manage
the VCPU threads' affinity accordingly.
To ensure that KVM doesn't expose an asymmetric system to the guest, the
PMU set for one VCPU will be used by all other VCPUs. Once a VCPU has run,
the PMU cannot be changed in order to avoid changing the list of available
events for a VCPU, or to change the semantics of existing events.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-6-alexandru.elisei@arm.com
The ARM PMU driver calls kvm_host_pmu_init() after probing to tell KVM that
a hardware PMU is available for guest emulation. Heterogeneous systems can
have more than one PMU present, and the callback gets called multiple
times, once for each of them. Keep track of all the PMUs available to KVM,
as they're going to be needed later.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-5-alexandru.elisei@arm.com
Userspace can specify which events a guest is allowed to use with the
KVM_ARM_VCPU_PMU_V3_FILTER attribute. The list of allowed events can be
identified by a guest from reading the PMCEID{0,1}_EL0 registers.
Changing the PMU event filter after a VCPU has run can cause reads of the
registers performed before the filter is changed to return different values
than reads performed with the new event filter in place. The architecture
defines the two registers as read-only, and this behaviour contradicts
that.
Keep track when the first VCPU has run and deny changes to the PMU event
filter to prevent this from happening.
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ Alexandru E: Added commit message, updated ioctl documentation ]
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-2-alexandru.elisei@arm.com
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
KVM/arm64 updates for Linux 5.16
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu
index. Unfortunately, we're about to move rework the iterator,
which requires this to be upgrade to an unsigned long.
Let's bite the bullet and repaint all of it in one go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-7-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the definition of kvm_arm_pmu_available to pmu-emul.c and, out of
"necessity", hide it behind CONFIG_HW_PERF_EVENTS. Provide a stub for
the key's wrapper, kvm_arm_support_pmu_v3(). Moving the key's definition
out of perf.c will allow a future commit to delete perf.c entirely.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211111020738.2512932-16-seanjc@google.com
Inspired by commit 254272ce65 ("kvm: x86: Add memcg accounting to KVM
allocations"), it would be better to make arm64 KVM consistent with
common kvm codes.
The memory allocations of VM scope should be charged into VM process
cgroup, hence change GFP_KERNEL to GFP_KERNEL_ACCOUNT.
There remain a few cases since these allocations are global, not in VM
scope.
Signed-off-by: Jia He <justin.he@arm.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210907123112.10232-3-justin.he@arm.com
Russell reported that since 5.13, KVM's probing of the PMU has
started to fail on his HW. As it turns out, there is an implicit
ordering dependency between the architectural PMU probing code and
and KVM's own probing. If, due to probe ordering reasons, KVM probes
before the PMU driver, it will fail to detect the PMU and prevent it
from being advertised to guests as well as the VMM.
Obviously, this is one probing too many, and we should be able to
deal with any ordering.
Add a callback from the PMU code into KVM to advertise the registration
of a host CPU PMU, allowing for any probing order.
Fixes: 5421db1be3 ("KVM: arm64: Divorce the perf code from oprofile helpers")
Reported-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/YUYRKVflRtUytzy5@shell.armlinux.org.uk
Cc: stable@vger.kernel.org
* kvm-arm64/misc-5.15:
: Misc improvements for 5.15:
:
: - Account the number of VMID-wide TLB invalidations as
: remote TLB flushes
: - Fix comments in the VGIC code
: - Cleanup the PMU IMPDEF identification
: - Streamline the TGRAN2 usage
: - Avoid advertising a 52bit IPA range for non-64KB configs
: - Avoid spurious signalling when a HW-mapped interrupt is in the
: A+P state on entry, and in the P state on exit, but that the
: physical line is not pending anymore.
: - Bunch of minor cleanups
KVM: arm64: vgic: Resample HW pending state on deactivation
KVM: arm64: vgic: Drop WARN from vgic_get_irq
KVM: arm64: Drop unused REQUIRES_VIRT
KVM: arm64: Drop check_kvm_target_cpu() based percpu probe
KVM: arm64: Drop init_common_resources()
KVM: arm64: Use ARM64_MIN_PARANGE_BITS as the minimum supported IPA
arm64/mm: Add remaining ID_AA64MMFR0_PARANGE_ macros
KVM: arm64: Restrict IPA size to maximum 48 bits on 4K and 16K page size
arm64/mm: Define ID_AA64MMFR0_TGRAN_2_SHIFT
KVM: arm64: perf: Replace '0xf' instances with ID_AA64DFR0_PMUVER_IMP_DEF
KVM: arm64: Fix comments related to GICv2 PMR reporting
KVM: arm64: Count VMID-wide TLB invalidations
arm64/kexec: Test page size support with new TGRAN range values
Signed-off-by: Marc Zyngier <maz@kernel.org>
In a KVM guest on arm64, performance counters interrupts have an
unnecessary overhead which slows down execution when using the "perf
record" command and limits the "perf record" sampling period.
The problem is that when a guest VM disables counters by clearing the
PMCR_EL0.E bit (bit 0), KVM will disable all counters defined in
PMCR_EL0 even if they are not enabled in PMCNTENSET_EL0.
KVM disables a counter by calling into the perf framework, in particular
by calling perf_event_create_kernel_counter() which is a time consuming
operation. So, for example, with a Neoverse N1 CPU core which has 6 event
counters and one cycle counter, KVM will always disable all 7 counters
even if only one is enabled.
This typically happens when using the "perf record" command in a guest
VM: perf will disable all event counters with PMCNTENTSET_EL0 and only
uses the cycle counter. And when using the "perf record" -F option with
a high profiling frequency, the overhead of KVM disabling all counters
instead of one on every counter interrupt becomes very noticeable.
The problem is fixed by having KVM disable only counters which are
enabled in PMCNTENSET_EL0. If a counter is not enabled in PMCNTENSET_EL0
then KVM will not enable it when setting PMCR_EL0.E and it will remain
disabled as long as it is not enabled in PMCNTENSET_EL0. So there is
effectively no need to disable a counter when clearing PMCR_EL0.E if it
is not enabled PMCNTENSET_EL0.
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
[maz: moved 'mask' close to the actual user, simplifying the patch]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210712170345.660272-1-alexandre.chartre@oracle.com
Link: https://lore.kernel.org/r/20210719123902.1493805-4-maz@kernel.org
According to ARM DDI 0487G.a, page D13-3895, setting the PMCR_EL0.P bit to
1 has the following effect:
"Reset all event counters accessible in the current Exception level, not
including PMCCNTR_EL0, to zero."
Similar behaviour is described for AArch32 on page G8-7022. Make it so.
Fixes: c01d6a1802 ("KVM: arm64: pmu: Only handle supported event counters")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210618105139.83795-1-alexandru.elisei@arm.com
We currently find out about the presence of a HW PMU (or the handling
of that PMU by perf, which amounts to the same thing) in a fairly
roundabout way, by checking the number of counters available to perf.
That's good enough for now, but we will soon need to find about about
that on paths where perf is out of reach (in the world switch).
Instead, let's turn kvm_arm_support_pmu_v3() into a static key.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210209114844.3278746-2-maz@kernel.org
Message-Id: <20210305185254.3730990-5-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of using a bunch of magic numbers, use the existing definitions
that have been added since 8673e02e58 ("arm64: perf: Add support
for ARMv8.5-PMU 64-bit counters")
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Upgrading the PMU code from ARMv8.1 to ARMv8.4 turns out to be
pretty easy. All that is required is support for PMMIR_EL1, which
is read-only, and for which returning 0 is a valid option as long
as we don't advertise STALL_SLOT as an implemented event.
Let's just do that and adjust what we return to the guest.
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM_ARM_VCPU_INIT ioctl calls kvm_reset_vcpu(), which in turn resets the
PMU with a call to kvm_pmu_vcpu_reset(). The function zeroes the PMU
chained counters bitmap and stops all the counters with a perf event
attached. Because it is called before the VCPU has had the chance to run,
no perf events are in use and none are released.
kvm_arm_pmu_v3_enable(), called by kvm_vcpu_first_run_init() only if the
VCPU has been initialized, also resets the PMU. kvm_pmu_vcpu_reset() in
this case does the exact same thing as the previous call, so remove it.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201201150157.223625-6-alexandru.elisei@arm.com
We currently gate the update of the PMU state on the PMU being "ready".
The "ready" state is only set to true when the first vcpu run is
successful, and if it isn't, we never reach the update code.
So the "ready" state is never the right thing to check for, and it
should instead be the presence of the PMU feature, which makes
a bit more sense.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
We accept to configure a PMU when a vcpu is created, even if the
HW (or the host) doesn't support it. This results in failures
when attributes get set, which is a bit odd as we should have
failed the vcpu creation the first place.
Move the check to the point where we check the vcpu feature set,
and fail early if we cannot support a PMU. This further simplifies
the attribute handling.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When enabling the PMU in kvm_arm_pmu_v3_enable(), KVM returns early if the
PMU flag created is false and skips any other checks. Because PMU emulation
is gated only on the VCPU feature being set, this makes it possible for
userspace to get away with setting the VCPU feature but not doing any
initialization for the PMU. Fix it by returning an error when trying to run
the VCPU if the PMU hasn't been initialized correctly.
The PMU is marked as created only if the interrupt ID has been set when
using an in-kernel irqchip. This means the same check in
kvm_arm_pmu_v3_enable() is redundant, remove it.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201126144916.164075-1-alexandru.elisei@arm.com
There are a number of places where we check for the KVM_ARM_VCPU_PMU_V3
feature. Wrap this check into a new kvm_vcpu_has_pmu(), and use
it at the existing locations.
No functional change.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
As we can now hide events from the guest, let's also adjust its view of
PCMEID{0,1}_EL1 so that it can figure out why some common events are not
counting as they should.
The astute user can still look into the TRM for their CPU and find out
they've been cheated, though. Nobody's perfect.
Signed-off-by: Marc Zyngier <maz@kernel.org>
It can be desirable to expose a PMU to a guest, and yet not want the
guest to be able to count some of the implemented events (because this
would give information on shared resources, for example.
For this, let's extend the PMUv3 device API, and offer a way to setup a
bitmap of the allowed events (the default being no bitmap, and thus no
filtering).
Userspace can thus allow/deny ranges of event. The default policy
depends on the "polarity" of the first filter setup (default deny if the
filter allows events, and default allow if the filter denies events).
This allows to setup exactly what is allowed for a given guest.
Note that although the ioctl is per-vcpu, the map of allowed events is
global to the VM (it can be setup from any vcpu until the vcpu PMU is
initialized).
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The PMU code suffers from a small defect where we assume that the event
number provided by the guest is always 16 bit wide, even if the CPU only
implements the ARMv8.0 architecture. This isn't really problematic in
the sense that the event number ends up in a system register, cropping
it to the right width, but still this needs fixing.
In order to make it work, let's probe the version of the PMU that the
guest is going to use. This is done by temporarily creating a kernel
event and looking at the PMUVer field that has been saved at probe time
in the associated arm_pmu structure. This in turn gets saved in the kvm
structure, and subsequently used to compute the event mask that gets
used throughout the PMU code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
The PMU emulation error handling is pretty messy when dealing with
attributes. Let's refactor it so that we have less duplication,
and that it is easy to extend later on.
A functional change is that kvm_arm_pmu_v3_init() used to return
-ENXIO when the PMU feature wasn't set. The error is now reported
as -ENODEV, matching the documentation. -ENXIO is still returned
when the interrupt isn't properly configured.
Signed-off-by: Marc Zyngier <maz@kernel.org>
