* for-next/esr-elx-64-bit:
: Treat ESR_ELx as a 64-bit register.
KVM: arm64: uapi: Add kvm_debug_exit_arch.hsr_high
KVM: arm64: Treat ESR_EL2 as a 64-bit register
arm64: Treat ESR_ELx as a 64-bit register
arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall
arm64: Make ESR_ELx_xVC_IMM_MASK compatible with assembly
* for-next/sysreg-gen: (32 commits)
: Automatic system register definition generation.
arm64/sysreg: Generate definitions for FAR_ELx
arm64/sysreg: Generate definitions for DACR32_EL2
arm64/sysreg: Generate definitions for CSSELR_EL1
arm64/sysreg: Generate definitions for CPACR_ELx
arm64/sysreg: Generate definitions for CONTEXTIDR_ELx
arm64/sysreg: Generate definitions for CLIDR_EL1
arm64/sve: Generate ZCR definitions
arm64/sme: Generate defintions for SVCR
arm64/sme: Generate SMPRI_EL1 definitions
arm64/sme: Automatically generate SMPRIMAP_EL2 definitions
arm64/sme: Automatically generate SMIDR_EL1 defines
arm64/sme: Automatically generate defines for SMCR
arm64/sysreg: Support generation of RAZ fields
arm64/sme: Remove _EL0 from name of SVCR - FIXME sysreg.h
arm64/sme: Standardise bitfield names for SVCR
arm64/sme: Drop SYS_ from SMIDR_EL1 defines
arm64/fp: Rename SVE and SME LEN field name to _WIDTH
arm64/fp: Make SVE and SME length register definition match architecture
arm64/sysreg: fix odd line spacing
arm64/sysreg: improve comment for regs without fields
...
Non RT kernels need to protect FPU against preemption and bottom half
processing. This is achieved by disabling bottom halves via
local_bh_disable() which implictly disables preemption.
On RT kernels this protection mechanism is not sufficient because
local_bh_disable() does not disable preemption. It serializes bottom half
related processing via a CPU local lock.
As bottom halves are running always in thread context on RT kernels
disabling preemption is the proper choice as it implicitly prevents bottom
half processing.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220505163207.85751-3-bigeasy@linutronix.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In the initial release of the ARM Architecture Reference Manual for
ARMv8-A, the ESR_ELx registers were defined as 32-bit registers. This
changed in 2018 with version D.a (ARM DDI 0487D.a) of the architecture,
when they became 64-bit registers, with bits [63:32] defined as RES0. In
version G.a, a new field was added to ESR_ELx, ISS2, which covers bits
[36:32]. This field is used when the Armv8.7 extension FEAT_LS64 is
implemented.
As a result of the evolution of the register width, Linux stores it as
both a 64-bit value and a 32-bit value, which hasn't affected correctness
so far as Linux only uses the lower 32 bits of the register.
Make the register type consistent and always treat it as 64-bit wide. The
register is redefined as an "unsigned long", which is an unsigned
double-word (64-bit quantity) for the LP64 machine (aapcs64 [1], Table 1,
page 14). The type was chosen because "unsigned int" is the most frequent
type for ESR_ELx and because FAR_ELx, which is used together with ESR_ELx
in exception handling, is also declared as "unsigned long". The 64-bit type
also makes adding support for architectural features that use fields above
bit 31 easier in the future.
The KVM hypervisor will receive a similar update in a subsequent patch.
[1] https://github.com/ARM-software/abi-aa/releases/download/2021Q3/aapcs64.pdf
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425114444.368693-4-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When saving and restoring the floating point state over an EFI runtime
call ensure that we handle streaming mode, only handling FFR if we are not
in streaming mode and ensuring that we are in normal mode over the call
into runtime services.
We currently assume that ZA will not be modified by runtime services, the
specification is not yet finalised so this may need updating if that
changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-24-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Both streaming mode and ZA may increase power consumption when they are
enabled and streaming mode makes many FPSIMD and SVE instructions undefined
which will cause problems for any kernel mode floating point so disable
both when we flush the CPU state. This covers both kernel_neon_begin() and
idle and after flushing the state a reload is always required anyway.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-23-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The streaming mode SVE registers are represented using the same data
structures as for SVE but since the vector lengths supported and in use
may not be the same as SVE we represent them with a new type NT_ARM_SSVE.
Unfortunately we only have a single 16 bit reserved field available in
the header so there is no space to fit the current and maximum vector
length for both standard and streaming SVE mode without redefining the
structure in a way the creates a complicatd and fragile ABI. Since FFR
is not present in streaming mode it is read and written as zero.
Setting NT_ARM_SSVE registers will put the task into streaming mode,
similarly setting NT_ARM_SVE registers will exit it. Reads that do not
correspond to the current mode of the task will return the header with
no register data. For compatibility reasons on write setting no flag for
the register type will be interpreted as setting SVE registers, though
users can provide no register data as an alternative mechanism for doing
so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-21-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Implement support for ZA in signal handling in a very similar way to how
we implement support for SVE registers, using a signal context structure
with optional register state after it. Where present this register state
stores the ZA matrix as a series of horizontal vectors numbered from 0 to
VL/8 in the endinanness independent format used for vectors.
As with SVE we do not allow changes in the vector length during signal
return but we do allow ZA to be enabled or disabled.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-20-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
By default all SME operations in userspace will trap. When this happens
we allocate storage space for the SME register state, set up the SVE
registers and disable traps. We do not need to initialize ZA since the
architecture guarantees that it will be zeroed when enabled and when we
trap ZA is disabled.
On syscall we exit streaming mode if we were previously in it and ensure
that all but the lower 128 bits of the registers are zeroed while
preserving the state of ZA. This follows the aarch64 PCS for SME, ZA
state is preserved over a function call and streaming mode is exited.
Since the traps for SME do not distinguish between streaming mode SVE
and ZA usage if ZA is in use rather than reenabling traps we instead
zero the parts of the SVE registers not shared with FPSIMD and leave SME
enabled, this simplifies handling SME traps. If ZA is not in use then we
reenable SME traps and fall through to normal handling of SVE.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-17-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Allocate space for storing ZA on first access to SME and use that to save
and restore ZA state when context switching. We do this by using the vector
form of the LDR and STR ZA instructions, these do not require streaming
mode and have implementation recommendations that they avoid contention
issues in shared SMCU implementations.
Since ZA is architecturally guaranteed to be zeroed when enabled we do not
need to explicitly zero ZA, either we will be restoring from a saved copy
or trapping on first use of SME so we know that ZA must be disabled.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-16-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When in streaming mode we need to save and restore the streaming mode
SVE register state rather than the regular SVE register state. This uses
the streaming mode vector length and omits FFR but is otherwise identical,
if TIF_SVE is enabled when we are in streaming mode then streaming mode
takes precedence.
This does not handle use of streaming SVE state with KVM, ptrace or
signals. This will be updated in further patches.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-15-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In SME the use of both streaming SVE mode and ZA are tracked through
PSTATE.SM and PSTATE.ZA, visible through the system register SVCR. In
order to context switch the floating point state for SME we need to
context switch the contents of this register as part of context
switching the floating point state.
Since changing the vector length exits streaming SVE mode and disables
ZA we also make sure we update SVCR appropriately when setting vector
length, and similarly ensure that new threads have streaming SVE mode
and ZA disabled.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-14-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Scalable Matrix Extension introduces support for a new thread specific
data register TPIDR2 intended for use by libc. The kernel must save the
value of TPIDR2 on context switch and should ensure that all new threads
start off with a default value of 0. Add a field to the thread_struct to
store TPIDR2 and context switch it with the other thread specific data.
In case there are future extensions which also use TPIDR2 we introduce
system_supports_tpidr2() and use that rather than system_supports_sme()
for TPIDR2 handling.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-13-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The vector lengths used for SME are controlled through a similar set of
registers to those for SVE and enumerated using a similar algorithm with
some slight differences due to the fact that unlike SVE there are no
restrictions on which combinations of vector lengths can be supported
nor any mandatory vector lengths which must be implemented. Add a new
vector type and implement support for enumerating it.
One slightly awkward feature is that we need to read the current vector
length using a different instruction (or enter streaming mode which
would have the same issue and be higher cost). Rather than add an ops
structure we add special cases directly in the otherwise generic
vec_probe_vqs() function, this is a bit inelegant but it's the only
place where this is an issue.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-10-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When saving the floating point context in fpsimd_save() we always reference
the state using last-> rather than using current->. Looking at the FP code
in isolation the reason for this is not entirely obvious, it's done because
when KVM is running it will bind the guest context and rely on the host
writing out the guest state on context switch away from the guest.
There's a slight trick here in that KVM still uses TIF_FOREIGN_FPSTATE and
TIF_SVE to communicate what needs to be saved, it maintains those flags
and restores them when it is done running the guest so that the normal
restore paths function when we return back to userspace.
Add a comment to explain this to help future readers work out what's going
on a bit faster.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220124161115.115200-1-broonie@kernel.org
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
* arm64/for-next/perf: (32 commits)
arm64: perf: Don't register user access sysctl handler multiple times
drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
arm64: perf: Support new DT compatibles
arm64: perf: Simplify registration boilerplate
arm64: perf: Support Denver and Carmel PMUs
drivers/perf: hisi: Add driver for HiSilicon PCIe PMU
docs: perf: Add description for HiSilicon PCIe PMU driver
dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings
drivers: perf: Add LLC-TAD perf counter support
perf/smmuv3: Synthesize IIDR from CoreSight ID registers
perf/smmuv3: Add devicetree support
dt-bindings: Add Arm SMMUv3 PMCG binding
perf/arm-cmn: Add debugfs topology info
perf/arm-cmn: Add CI-700 Support
dt-bindings: perf: arm-cmn: Add CI-700
perf/arm-cmn: Support new IP features
perf/arm-cmn: Demarcate CMN-600 specifics
perf/arm-cmn: Move group validation data off-stack
perf/arm-cmn: Optimise DTC counter accesses
...
* for-next/misc:
: Miscellaneous patches
arm64: Use correct method to calculate nomap region boundaries
arm64: Drop outdated links in comments
arm64: errata: Fix exec handling in erratum 1418040 workaround
arm64: Unhash early pointer print plus improve comment
asm-generic: introduce io_stop_wc() and add implementation for ARM64
arm64: remove __dma_*_area() aliases
docs/arm64: delete a space from tagged-address-abi
arm64/fp: Add comments documenting the usage of state restore functions
arm64: mm: Use asid feature macro for cheanup
arm64: mm: Rename asid2idx() to ctxid2asid()
arm64: kexec: reduce calls to page_address()
arm64: extable: remove unused ex_handler_t definition
arm64: entry: Use SDEI event constants
arm64: Simplify checking for populated DT
arm64/kvm: Fix bitrotted comment for SVE handling in handle_exit.c
* for-next/cache-ops-dzp:
: Avoid DC instructions when DCZID_EL0.DZP == 1
arm64: mte: DC {GVA,GZVA} shouldn't be used when DCZID_EL0.DZP == 1
arm64: clear_page() shouldn't use DC ZVA when DCZID_EL0.DZP == 1
* for-next/stacktrace:
: Unify the arm64 unwind code
arm64: Make some stacktrace functions private
arm64: Make dump_backtrace() use arch_stack_walk()
arm64: Make profile_pc() use arch_stack_walk()
arm64: Make return_address() use arch_stack_walk()
arm64: Make __get_wchan() use arch_stack_walk()
arm64: Make perf_callchain_kernel() use arch_stack_walk()
arm64: Mark __switch_to() as __sched
arm64: Add comment for stack_info::kr_cur
arch: Make ARCH_STACKWALK independent of STACKTRACE
* for-next/xor-neon:
: Use SHA3 instructions to speed up XOR
arm64/xor: use EOR3 instructions when available
* for-next/kasan:
: Log potential KASAN shadow aliases
arm64: mm: log potential KASAN shadow alias
arm64: mm: use die_kernel_fault() in do_mem_abort()
* for-next/armv8_7-fp:
: Add HWCAPS for ARMv8.7 FEAT_AFP amd FEAT_RPRES
arm64: cpufeature: add HWCAP for FEAT_RPRES
arm64: add ID_AA64ISAR2_EL1 sys register
arm64: cpufeature: add HWCAP for FEAT_AFP
* for-next/atomics:
: arm64 atomics clean-ups and codegen improvements
arm64: atomics: lse: define RETURN ops in terms of FETCH ops
arm64: atomics: lse: improve constraints for simple ops
arm64: atomics: lse: define ANDs in terms of ANDNOTs
arm64: atomics lse: define SUBs in terms of ADDs
arm64: atomics: format whitespace consistently
* for-next/bti:
: BTI clean-ups
arm64: Ensure that the 'bti' macro is defined where linkage.h is included
arm64: Use BTI C directly and unconditionally
arm64: Unconditionally override SYM_FUNC macros
arm64: Add macro version of the BTI instruction
arm64: ftrace: add missing BTIs
arm64: kexec: use __pa_symbol(empty_zero_page)
arm64: update PAC description for kernel
* for-next/sve:
: SVE code clean-ups and refactoring in prepararation of Scalable Matrix Extensions
arm64/sve: Minor clarification of ABI documentation
arm64/sve: Generalise vector length configuration prctl() for SME
arm64/sve: Make sysctl interface for SVE reusable by SME
* for-next/kselftest:
: arm64 kselftest additions
kselftest/arm64: Add pidbench for floating point syscall cases
kselftest/arm64: Add a test program to exercise the syscall ABI
kselftest/arm64: Allow signal tests to trigger from a function
kselftest/arm64: Parameterise ptrace vector length information
* for-next/kcsan:
: Enable KCSAN for arm64
arm64: Enable KCSAN
The vector length configuration for SME is very similar to that for SVE
so in order to allow reuse refactor the SVE configuration so that it takes
the vector type from the struct ctl_table. Since there's no dedicated space
for this we repurpose the extra1 field to store the vector type, this is
otherwise unused for integer sysctls.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210184133.320748-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The bit of documentation that talks about TIF_FOREIGN_FPSTATE
does not mention the ungodly tricks that KVM plays with this flag.
Try and document this for the posterity.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In configurations where SVE is disabled we define but never reference the
functions for retrieving the default vector length, causing warnings. Fix
this by move the ifdef up, marking get_default_vl() inline since it is
referenced from code guarded by an IS_ENABLED() check, and do the same for
the other accessors for consistency.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211022141635.2360415-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently when restoring the SVE state we supply the SVE vector length
as an argument to sve_load_state() and the underlying macros. This becomes
inconvenient with the addition of SME since we may need to restore any
combination of SVE and SME vector lengths, and we already separately
restore the vector length in the KVM code. We don't need to know the vector
length during the actual register load since the SME load instructions can
index into the data array for us.
Refactor the interface so we explicitly set the vector length separately
to restoring the SVE registers in preparation for adding SME support, no
functional change should be involved.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211019172247.3045838-9-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
With the introduction of SME we will have a second vector length in the
system, enumerated and configured in a very similar fashion to the
existing SVE vector length. While there are a few differences in how
things are handled this is a relatively small portion of the overall
code so in order to avoid code duplication we factor out
We create two structs, one vl_info for the static hardware properties
and one vl_config for the runtime configuration, with an array
instantiated for each and update all the users to reference these. Some
accessor functions are provided where helpful for readability, and the
write to set the vector length is put into a function since the system
register being updated needs to be chosen at compile time.
This is a mostly mechanical replacement, further work will be required
to actually make things generic, ensuring that we handle those places
where there are differences properly.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211019172247.3045838-8-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In a system with SME there are parallel vector length controls for SVE and
SME vectors which function in much the same way so it is desirable to
share the code for handling them as much as possible. In order to prepare
for doing this add a layer of accessor functions for the various VL related
operations on tasks.
Since almost all current interactions are actually via task->thread rather
than directly with the thread_info the accessors use that. Accessors are
provided for both generic and SVE specific usage, the generic accessors
should be used for cases where register state is being manipulated since
the registers are shared between streaming and regular SVE so we know that
when SME support is implemented we will always have to be in the appropriate
mode already and hence can generalise now.
Since we are using task_struct and we don't want to cause widespread
inclusion of sched.h the acessors are all out of line, it is hoped that
none of the uses are in a sufficiently critical path for this to be an
issue. Those that are most likely to present an issue are in the same
translation unit so hopefully the compiler may be able to inline anyway.
This is purely adding the layer of abstraction, additional work will be
needed to support tasks using SME.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211019172247.3045838-7-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
SME introduces streaming SVE mode in which FFR is not present and the
instructions for accessing it UNDEF. In preparation for handling this
update the low level SVE state access functions to take a flag specifying
if FFR should be handled. When saving the register state we store a zero
for FFR to guard against uninitialized data being read. No behaviour change
should be introduced by this patch.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211019172247.3045838-5-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
When we need a buffer for SVE register state we call sve_alloc() to make
sure that one is there. In order to avoid repeated allocations and frees
we keep the buffer around unless we change vector length and just memset()
it to ensure a clean register state. The function that deals with this
takes the task to operate on as an argument, however in the case where we
do a memset() we initialise using the SVE state size for the current task
rather than the task passed as an argument.
This is only an issue in the case where we are setting the register state
for a task via ptrace and the task being configured has a different vector
length to the task tracing it. In the case where the buffer is larger in
the traced process we will leak old state from the traced process to
itself, in the case where the buffer is smaller in the traced process we
will overflow the buffer and corrupt memory.
Fixes: bc0ee47603 ("arm64/sve: Core task context handling")
Cc: <stable@vger.kernel.org> # 4.15.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210909165356.10675-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we "handle" failure to allocate the SVE register storage by
doing a BUG_ON() and hoping for the best. This is obviously not great and
the memory allocation failure will already be loud enough without the
BUG_ON(). As the comment says it is a corner case but let's try to do a bit
better, remove the BUG_ON() and add code to handle the failure in the
callers.
For the ptrace and signal code we can return -ENOMEM gracefully however
we have no real error reporting path available to us for the SVE access
trap so instead generate a SIGKILL if the allocation fails there. This
at least means that we won't try to soldier on and end up trying to
access the nonexistant state and while it's obviously not ideal for
userspace SIGKILL doesn't allow any handling so minimises the ABI
impact, making it easier to improve the interface later if we come up
with a better idea.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210824153417.18371-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* for-next/misc:
: Miscellaneous patches
arm64/sve: Add compile time checks for SVE hooks in generic functions
arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
arm64/sve: Remove redundant system_supports_sve() tests
arm64: mte: Remove unused mte_assign_mem_tag_range()
arm64: Add __init section marker to some functions
arm64/sve: Rework SVE access trap to convert state in registers
docs: arm64: Fix a grammar error
arm64: smp: Add missing prototype for some smp.c functions
arm64: setup: name `tcr` register
arm64: setup: name `mair` register
arm64: stacktrace: Move start_backtrace() out of the header
arm64: barrier: Remove spec_bar() macro
arm64: entry: remove test_irqs_unmasked macro
ARM64: enable GENERIC_FIND_FIRST_BIT
arm64: defconfig: Use DEBUG_INFO_REDUCED
* for-next/kselftest:
: Various kselftests for arm64
kselftest: arm64: Add BTI tests
kselftest/arm64: mte: Report filename on failing temp file creation
kselftest/arm64: mte: Fix clang warning
kselftest/arm64: mte: Makefile: Fix clang compilation
kselftest/arm64: mte: Output warning about failing compiler
kselftest/arm64: mte: Use cross-compiler if specified
kselftest/arm64: mte: Fix MTE feature detection
kselftest/arm64: mte: common: Fix write() warnings
kselftest/arm64: mte: user_mem: Fix write() warning
kselftest/arm64: mte: ksm_options: Fix fscanf warning
kselftest/arm64: mte: Fix pthread linking
kselftest/arm64: mte: Fix compilation with native compiler
* for-next/xntable:
: Add hierarchical XN permissions for all page tables
arm64: mm: use XN table mapping attributes for user/kernel mappings
arm64: mm: use XN table mapping attributes for the linear region
arm64: mm: add missing P4D definitions and use them consistently
* for-next/vdso:
: Minor improvements to the compat vdso and sigpage
arm64: compat: Poison the compat sigpage
arm64: vdso: Avoid ISB after reading from cntvct_el0
arm64: compat: Allow signal page to be remapped
arm64: vdso: Remove redundant calls to flush_dcache_page()
arm64: vdso: Use GFP_KERNEL for allocating compat vdso and signal pages
* for-next/fiq:
: Support arm64 FIQ controller registration
arm64: irq: allow FIQs to be handled
arm64: Always keep DAIF.[IF] in sync
arm64: entry: factor irq triage logic into macros
arm64: irq: rework root IRQ handler registration
arm64: don't use GENERIC_IRQ_MULTI_HANDLER
genirq: Allow architectures to override set_handle_irq() fallback
* for-next/epan:
: Support for Enhanced PAN (execute-only permissions)
arm64: Support execute-only permissions with Enhanced PAN
* for-next/kasan-vmalloc:
: Support CONFIG_KASAN_VMALLOC on arm64
arm64: Kconfig: select KASAN_VMALLOC if KANSAN_GENERIC is enabled
arm64: kaslr: support randomized module area with KASAN_VMALLOC
arm64: Kconfig: support CONFIG_KASAN_VMALLOC
arm64: kasan: abstract _text and _end to KERNEL_START/END
arm64: kasan: don't populate vmalloc area for CONFIG_KASAN_VMALLOC
* for-next/fgt-boot-init:
: Booting clarifications and fine grained traps setup
arm64: Require that system registers at all visible ELs be initialized
arm64: Disable fine grained traps on boot
arm64: Document requirements for fine grained traps at boot
* for-next/vhe-only:
: Dealing with VHE-only CPUs (a.k.a. M1)
arm64: Get rid of CONFIG_ARM64_VHE
arm64: Cope with CPUs stuck in VHE mode
arm64: cpufeature: Allow early filtering of feature override
* arm64/for-next/perf:
arm64: perf: Remove redundant initialization in perf_event.c
perf/arm_pmu_platform: Clean up with dev_printk
perf/arm_pmu_platform: Fix error handling
perf/arm_pmu_platform: Use dev_err_probe() for IRQ errors
docs: perf: Address some html build warnings
docs: perf: Add new description on HiSilicon uncore PMU v2
drivers/perf: hisi: Add support for HiSilicon PA PMU driver
drivers/perf: hisi: Add support for HiSilicon SLLC PMU driver
drivers/perf: hisi: Update DDRC PMU for programmable counter
drivers/perf: hisi: Add new functions for HHA PMU
drivers/perf: hisi: Add new functions for L3C PMU
drivers/perf: hisi: Add PMU version for uncore PMU drivers.
drivers/perf: hisi: Refactor code for more uncore PMUs
drivers/perf: hisi: Remove unnecessary check of counter index
drivers/perf: Simplify the SMMUv3 PMU event attributes
drivers/perf: convert sysfs sprintf family to sysfs_emit
drivers/perf: convert sysfs scnprintf family to sysfs_emit_at() and sysfs_emit()
drivers/perf: convert sysfs snprintf family to sysfs_emit
* for-next/neon-softirqs-disabled:
: Run kernel mode SIMD with softirqs disabled
arm64: fpsimd: run kernel mode NEON with softirqs disabled
arm64: assembler: introduce wxN aliases for wN registers
arm64: assembler: remove conditional NEON yield macros
Currently there are a number of places in the SVE code where we check both
system_supports_sve() and TIF_SVE. This is a bit redundant given that we
should never get into a situation where we have set TIF_SVE without having
SVE support and it is not clear that silently ignoring a mistakenly set
TIF_SVE flag is the most sensible error handling approach. For now let's
just drop the system_supports_sve() checks since this will at least reduce
overhead a little.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210412172320.3315-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Kernel mode NEON can be used in task or softirq context, but only in
a non-nesting manner, i.e., softirq context is only permitted if the
interrupt was not taken at a point where the kernel was using the NEON
in task context.
This means all users of kernel mode NEON have to be aware of this
limitation, and either need to provide scalar fallbacks that may be much
slower (up to 20x for AES instructions) and potentially less safe, or
use an asynchronous interface that defers processing to a later time
when the NEON is guaranteed to be available.
Given that grabbing and releasing the NEON is cheap, we can relax this
restriction, by increasing the granularity of kernel mode NEON code, and
always disabling softirq processing while the NEON is being used in task
context.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210302090118.30666-4-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we enable SVE usage in userspace after taking a SVE access trap we
need to ensure that the portions of the register state that are not
shared with the FPSIMD registers are zeroed. Currently we do this by
forcing the FPSIMD registers to be saved to the task struct and converting
them there. This is wasteful in the common case where the task state is
loaded into the registers and we will immediately return to userspace
since we can initialise the SVE state directly in registers instead of
accessing multiple copies of the register state in memory.
Instead in that common case do the conversion in the registers and
update the task metadata so that we can return to userspace without
spilling the register state to memory unless there is some other reason
to do so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210312190313.24598-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It doesn't make sense to issue prctl(PR_PAC_RESET_KEYS) on a
compat task because the 32-bit instruction set does not offer PAuth
instructions. For consistency with other 64-bit only prctls such as
{SET,GET}_TAGGED_ADDR_CTRL, reject the prctl on compat tasks.
Although this is a userspace-visible change, maybe it isn't too late
to make this change given that the hardware isn't available yet and
it's very unlikely that anyone has 32-bit software that actually
depends on this succeeding.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/Ie885a1ff84ab498cc9f62d6451e9f2cfd4b1d06a
Link: https://lore.kernel.org/r/20201014052430.11630-1-pcc@google.com
[will: Do the same for the SVE prctl()s]
Signed-off-by: Will Deacon <will@kernel.org>
Remove unused functions and parameters from ACPI IORT code.
(Zenghui Yu via Lorenzo Pieralisi)
* for-next/acpi:
ACPI/IORT: Remove the unused inline functions
ACPI/IORT: Drop the unused @ops of iort_add_device_replay()
Remove redundant code and fix documentation of caching behaviour for the
HVC_SOFT_RESTART hypercall.
(Pingfan Liu)
* for-next/boot:
Documentation/kvm/arm: improve description of HVC_SOFT_RESTART
arm64/relocate_kernel: remove redundant code
Improve reporting of unexpected kernel traps due to BPF JIT failure.
(Will Deacon)
* for-next/bpf:
arm64: Improve diagnostics when trapping BRK with FAULT_BRK_IMM
Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
(Anshuman Khandual)
* for-next/cpuinfo:
arm64/cpuinfo: Define HWCAP name arrays per their actual bit definitions
Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
(Julien Grall)
* for-next/fpsimd:
arm64/sve: Implement a helper to load SVE registers from FPSIMD state
arm64/sve: Implement a helper to flush SVE registers
arm64/fpsimdmacros: Allow the macro "for" to be used in more cases
arm64/fpsimdmacros: Introduce a macro to update ZCR_EL1.LEN
arm64/signal: Update the comment in preserve_sve_context
arm64/fpsimd: Update documentation of do_sve_acc
Miscellaneous changes.
(Tian Tao and others)
* for-next/misc:
arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE
arm64: mm: Fix missing-prototypes in pageattr.c
arm64/fpsimd: Fix missing-prototypes in fpsimd.c
arm64: hibernate: Remove unused including <linux/version.h>
arm64/mm: Refactor {pgd, pud, pmd, pte}_ERROR()
arm64: Remove the unused include statements
arm64: get rid of TEXT_OFFSET
arm64: traps: Add str of description to panic() in die()
Memory management updates and cleanups.
(Anshuman Khandual and others)
* for-next/mm:
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64/mm: Unify CONT_PMD_SHIFT
arm64/mm: Unify CONT_PTE_SHIFT
arm64/mm: Remove CONT_RANGE_OFFSET
arm64/mm: Enable THP migration
arm64/mm: Change THP helpers to comply with generic MM semantics
arm64/mm/ptdump: Add address markers for BPF regions
Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
(Clint Sbisa)
* for-next/pci:
arm64: Enable PCI write-combine resources under sysfs
Perf/PMU driver updates.
(Julien Thierry and others)
* for-next/perf:
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm_pmu: arm64: Use NMIs for PMU
arm_pmu: Introduce pmu_irq_ops
KVM: arm64: pmu: Make overflow handler NMI safe
arm64: perf: Defer irq_work to IPI_IRQ_WORK
arm64: perf: Remove PMU locking
arm64: perf: Avoid PMXEV* indirection
arm64: perf: Add missing ISB in armv8pmu_enable_counter()
perf: Add Arm CMN-600 PMU driver
perf: Add Arm CMN-600 DT binding
arm64: perf: Add support caps under sysfs
drivers/perf: thunderx2_pmu: Fix memory resource error handling
drivers/perf: xgene_pmu: Fix uninitialized resource struct
perf: arm_dsu: Support DSU ACPI devices
arm64: perf: Remove unnecessary event_idx check
drivers/perf: hisi: Add missing include of linux/module.h
arm64: perf: Add general hardware LLC events for PMUv3
Support for the Armv8.3 Pointer Authentication enhancements.
(By Amit Daniel Kachhap)
* for-next/ptrauth:
arm64: kprobe: clarify the comment of steppable hint instructions
arm64: kprobe: disable probe of fault prone ptrauth instruction
arm64: cpufeature: Modify address authentication cpufeature to exact
arm64: ptrauth: Introduce Armv8.3 pointer authentication enhancements
arm64: traps: Allow force_signal_inject to pass esr error code
arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions
Tonnes of cleanup to the SDEI driver.
(Gavin Shan)
* for-next/sdei:
firmware: arm_sdei: Remove _sdei_event_unregister()
firmware: arm_sdei: Remove _sdei_event_register()
firmware: arm_sdei: Introduce sdei_do_local_call()
firmware: arm_sdei: Cleanup on cross call function
firmware: arm_sdei: Remove while loop in sdei_event_unregister()
firmware: arm_sdei: Remove while loop in sdei_event_register()
firmware: arm_sdei: Remove redundant error message in sdei_probe()
firmware: arm_sdei: Remove duplicate check in sdei_get_conduit()
firmware: arm_sdei: Unregister driver on error in sdei_init()
firmware: arm_sdei: Avoid nested statements in sdei_init()
firmware: arm_sdei: Retrieve event number from event instance
firmware: arm_sdei: Common block for failing path in sdei_event_create()
firmware: arm_sdei: Remove sdei_is_err()
Selftests for Pointer Authentication and FPSIMD/SVE context-switching.
(Mark Brown and Boyan Karatotev)
* for-next/selftests:
selftests: arm64: Add build and documentation for FP tests
selftests: arm64: Add wrapper scripts for stress tests
selftests: arm64: Add utility to set SVE vector lengths
selftests: arm64: Add stress tests for FPSMID and SVE context switching
selftests: arm64: Add test for the SVE ptrace interface
selftests: arm64: Test case for enumeration of SVE vector lengths
kselftests/arm64: add PAuth tests for single threaded consistency and differently initialized keys
kselftests/arm64: add PAuth test for whether exec() changes keys
kselftests/arm64: add nop checks for PAuth tests
kselftests/arm64: add a basic Pointer Authentication test
Implementation of ARCH_STACKWALK for unwinding.
(Mark Brown)
* for-next/stacktrace:
arm64: Move console stack display code to stacktrace.c
arm64: stacktrace: Convert to ARCH_STACKWALK
arm64: stacktrace: Make stack walk callback consistent with generic code
stacktrace: Remove reliable argument from arch_stack_walk() callback
Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
(Jean-Philippe Brucker)
* for-next/svm:
arm64: cpufeature: Export symbol read_sanitised_ftr_reg()
arm64: mm: Pin down ASIDs for sharing mm with devices
Rely on firmware tables for establishing CPU topology.
(Valentin Schneider)
* for-next/topology:
arm64: topology: Stop using MPIDR for topology information
Spelling fixes.
(Xiaoming Ni and Yanfei Xu)
* for-next/tpyos:
arm64/numa: Fix a typo in comment of arm64_numa_init
arm64: fix some spelling mistakes in the comments by codespell
vDSO cleanups.
(Will Deacon)
* for-next/vdso:
arm64: vdso: Fix unusual formatting in *setup_additional_pages()
arm64: vdso32: Remove a bunch of #ifdef CONFIG_COMPAT_VDSO guards
Fix the following warnings.
arch/arm64/kernel/fpsimd.c:935:6: warning: no previous prototype for
‘do_sve_acc’ [-Wmissing-prototypes]
arch/arm64/kernel/fpsimd.c:962:6: warning: no previous prototype for
‘do_fpsimd_acc’ [-Wmissing-prototypes]
arch/arm64/kernel/fpsimd.c:971:6: warning: no previous prototype for
‘do_fpsimd_exc’ [-Wmissing-prototypes]
arch/arm64/kernel/fpsimd.c:1266:6: warning: no previous prototype for
‘kernel_neon_begin’ [-Wmissing-prototypes]
arch/arm64/kernel/fpsimd.c:1292:6: warning: no previous prototype for
‘kernel_neon_end’ [-Wmissing-prototypes]
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/1600157999-14802-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
