Convert FAR_ELx to automatic register generation as per DDI0487H.a. In the
architecture these registers have a single field "named" as "Faulting
Virtual Address for synchronous exceptions taken to ELx" occupying the
entire register, in order to fit in with the requirement to describe the
contents of the register I have created a single field named ADDR.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220520161639.324236-7-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Convert the CPACR system register definitions to be automatically generated
using the definitions in DDI0487H.a. The kernel does have some additional
definitions for subfields of SMEN, FPEN and ZEN which are not identified as
distinct subfields in the architecture so the definitions are not updated
as part of this patch.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220520161639.324236-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently (as of DDI0487H.a) the architecture defines the vector length
control field in ZCR and SMCR as being 4 bits wide with an additional 5
bits reserved above it marked as RAZ/WI for future expansion. The kernel
currently attempts to anticipate such expansion by treating these extra
bits as part of the LEN field but this will be inconvenient when we start
generating the defines and would cause problems in the event that the
architecture goes a different direction with these fields. Let's instead
change the defines to reflect the currently defined architecture, we can
update in future as needed.
No change in behaviour should be seen in any system, even emulated systems
using the maximum allowed vector length for the current architecture.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510161208.631259-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* for-next/sme: (29 commits)
: Scalable Matrix Extensions support.
arm64/sve: Make kernel FPU protection RT friendly
arm64/sve: Delay freeing memory in fpsimd_flush_thread()
arm64/sme: More sensibly define the size for the ZA register set
arm64/sme: Fix NULL check after kzalloc
arm64/sme: Add ID_AA64SMFR0_EL1 to __read_sysreg_by_encoding()
arm64/sme: Provide Kconfig for SME
KVM: arm64: Handle SME host state when running guests
KVM: arm64: Trap SME usage in guest
KVM: arm64: Hide SME system registers from guests
arm64/sme: Save and restore streaming mode over EFI runtime calls
arm64/sme: Disable streaming mode and ZA when flushing CPU state
arm64/sme: Add ptrace support for ZA
arm64/sme: Implement ptrace support for streaming mode SVE registers
arm64/sme: Implement ZA signal handling
arm64/sme: Implement streaming SVE signal handling
arm64/sme: Disable ZA and streaming mode when handling signals
arm64/sme: Implement traps and syscall handling for SME
arm64/sme: Implement ZA context switching
arm64/sme: Implement streaming SVE context switching
arm64/sme: Implement SVCR context switching
...
Now that we have a script for generating system registers hook it up to the
build system similarly to cpucaps. Since we don't currently have any actual
register information in the input file this should produce no change in the
built kernel. For ease of review the register information will be converted
in separate patches.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220503170233.507788-10-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In older revisions of the architecture SCTLR_EL1 contained several RES1
fields but in DDI0487H.a these now all have assigned functions. In
preparation for automatically generating sysreg.h provide explicit
definitions for all these bits and use them in the INIT_SCTLR_EL1_ macros
where _RES1 was previously used.
There should be no functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220503170233.507788-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In preparation for automatic generation of the defines for system registers
make the values used for the enumeration in SCTLR_ELx.TCF suitable for use
with the newly defined SYS_FIELD_PREP_ENUM helper, removing the shift from
the define and using the helper to generate it on use instead. Since we
only ever interact with this field in EL1 and in preparation for generation
of the defines also rename from SCTLR_ELx to SCTLR_EL1. SCTLR_EL2 is not
quite the same as SCTLR_EL1 so the conversion does not share the field
definitions.
There should be no functional change from this patch.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220503170233.507788-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In preparation for automatic generation of SCTLR_EL1 register definitions
make the macros used to define SCTLR_EL1.TCF0 and the enumeration values it
has more standard so they can be used with FIELD_PREP() via the newly
defined SYS_FIELD_PREP_ helpers.
Since the field also exists in SCTLR_EL2 with the same values also rename
the macros to SCTLR_ELx rather than SCTLR_EL1.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com
Link: https://lore.kernel.org/r/20220503170233.507788-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The macros we define for the bitfields within sysregs have very regular
names, especially once we switch to automatic generation of those macros.
Take advantage of this to define wrappers around FIELD_PREP() allowing
us to simplify setting values in fields either numerically
SYS_FIELD_PREP(SCTLR_EL1, TCF0, 0x0)
or using the values of enumerations within the fields
SYS_FIELD_PREP_ENUM(SCTLR_EL1, TCF0, ASYMM)
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220503170233.507788-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64 Scalable Matrix Extension (SME) adds some new system registers,
fields in existing system registers and exception syndromes. This patch
adds definitions for these for use in future patches implementing support
for this extension.
Since SME will be the first user of FEAT_HCX in the kernel also include
the definitions for enumerating it and the HCRX system register it adds.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull kvm updates from Paolo Bonzini:
"ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical
sections that last too long for very large guests backed by 4
KiB SPTEs.
- Zap invalid and defunct roots asynchronously via
concurrency-managed work queue.
- Allowing yielding when zapping TDP MMU roots in response to the
root's last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the
paging structure now holds RCU as a proxy for all vCPUs running
in the guest, i.e. to prolongs the grace period on their behalf.
It then kicks the the vCPUs out of guest mode before doing
rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that need
memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
KVM: use kvcalloc for array allocations
KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2
kvm: x86: Require const tsc for RT
KVM: x86: synthesize CPUID leaf 0x80000021h if useful
KVM: x86: add support for CPUID leaf 0x80000021
KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask
Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()"
kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU
KVM: arm64: fix typos in comments
KVM: arm64: Generalise VM features into a set of flags
KVM: s390: selftests: Add error memop tests
KVM: s390: selftests: Add more copy memop tests
KVM: s390: selftests: Add named stages for memop test
KVM: s390: selftests: Add macro as abstraction for MEM_OP
KVM: s390: selftests: Split memop tests
KVM: s390x: fix SCK locking
RISC-V: KVM: Implement SBI HSM suspend call
RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function
RISC-V: Add SBI HSM suspend related defines
RISC-V: KVM: Implement SBI v0.3 SRST extension
...
Merge in the latest Spectre mess to fix up conflicts with what was
already queued for 5.18 when the embargo finally lifted.
* for-next/spectre-bhb: (21 commits)
arm64: Do not include __READ_ONCE() block in assembly files
arm64: proton-pack: Include unprivileged eBPF status in Spectre v2 mitigation reporting
arm64: Use the clearbhb instruction in mitigations
KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated
arm64: Mitigate spectre style branch history side channels
arm64: proton-pack: Report Spectre-BHB vulnerabilities as part of Spectre-v2
arm64: Add percpu vectors for EL1
arm64: entry: Add macro for reading symbol addresses from the trampoline
arm64: entry: Add vectors that have the bhb mitigation sequences
arm64: entry: Add non-kpti __bp_harden_el1_vectors for mitigations
arm64: entry: Allow the trampoline text to occupy multiple pages
arm64: entry: Make the kpti trampoline's kpti sequence optional
arm64: entry: Move trampoline macros out of ifdef'd section
arm64: entry: Don't assume tramp_vectors is the start of the vectors
arm64: entry: Allow tramp_alias to access symbols after the 4K boundary
arm64: entry: Move the trampoline data page before the text page
arm64: entry: Free up another register on kpti's tramp_exit path
arm64: entry: Make the trampoline cleanup optional
KVM: arm64: Allow indirect vectors to be used without SPECTRE_V3A
arm64: spectre: Rename spectre_v4_patch_fw_mitigation_conduit
...
* for-next/fpsimd:
arm64: cpufeature: Warn if we attempt to read a zero width field
arm64: cpufeature: Add missing .field_width for GIC system registers
arm64: signal: nofpsimd: Do not allocate fp/simd context when not available
arm64: cpufeature: Always specify and use a field width for capabilities
arm64: Always use individual bits in CPACR floating point enables
arm64: Define CPACR_EL1_FPEN similarly to other floating point controls
* for-next/pauth:
arm64: Add support of PAuth QARMA3 architected algorithm
arm64: cpufeature: Mark existing PAuth architected algorithm as QARMA5
arm64: cpufeature: Account min_field_value when cheking secondaries for PAuth
CPACR_EL1 has several bitfields for controlling traps for floating point
features to EL1, each of which has a separate bits for EL0 and EL1. Marc
Zyngier noted that we are not consistent in our use of defines to
manipulate these, sometimes using a define covering the whole field and
sometimes using defines for the individual bits. Make this consistent by
expanding the whole field defines where they are used (currently only in
the KVM code) and deleting them so that no further uses can be
introduced.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220207152109.197566-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The base floating point, SVE and SME all have enable controls for EL0 and
EL1 in CPACR_EL1 which have a similar layout and function. Currently the
basic floating point enable FPEN is defined differently to the SVE control,
specified as a single define in kvm_arm.h rather than in sysreg.h. Move the
define to sysreg.h and provide separate EL0 and EL1 control bits so code
managing the different floating point enables can look consistent.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220207152109.197566-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
QARMA3 is relaxed version of the QARMA5 algorithm which expected to
reduce the latency of calculation while still delivering a suitable
level of security.
Support for QARMA3 can be discovered via ID_AA64ISAR2_EL1
APA3, bits [15:12] Indicates whether the QARMA3 algorithm is
implemented in the PE for address
authentication in AArch64 state.
GPA3, bits [11:8] Indicates whether the QARMA3 algorithm is
implemented in the PE for generic code
authentication in AArch64 state.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220224124952.119612-4-vladimir.murzin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Future CPUs may implement a clearbhb instruction that is sufficient
to mitigate SpectreBHB. CPUs that implement this instruction, but
not CSV2.3 must be affected by Spectre-BHB.
Add support to use this instruction as the BHB mitigation on CPUs
that support it. The instruction is in the hint space, so it will
be treated by a NOP as older CPUs.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Speculation attacks against some high-performance processors can
make use of branch history to influence future speculation.
When taking an exception from user-space, a sequence of branches
or a firmware call overwrites or invalidates the branch history.
The sequence of branches is added to the vectors, and should appear
before the first indirect branch. For systems using KPTI the sequence
is added to the kpti trampoline where it has a free register as the exit
from the trampoline is via a 'ret'. For systems not using KPTI, the same
register tricks are used to free up a register in the vectors.
For the firmware call, arch-workaround-3 clobbers 4 registers, so
there is no choice but to save them to the EL1 stack. This only happens
for entry from EL0, so if we take an exception due to the stack access,
it will not become re-entrant.
For KVM, the existing branch-predictor-hardening vectors are used.
When a spectre version of these vectors is in use, the firmware call
is sufficient to mitigate against Spectre-BHB. For the non-spectre
versions, the sequence of branches is added to the indirect vector.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
An upcoming change to KVM will emulate the OS Lock from the PoV of the
guest. Add OSLSR_EL1 to the cpu context and handle reads using the
stored value. Define some mnemonics for for handling the OSLM field and
use them to make the reset value of OSLSR_EL1 more readable.
Wire up a custom handler for writes from userspace and prevent any of
the invariant bits from changing. Note that the OSLK bit is not
invariant and will be made writable by the aforementioned change.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-3-oupton@google.com
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
In <asm/sysreg.h> we have macros to convert the names of general purpose
registers (GPRs) into integer constants, which we use to manually build
the encoding for `MRS` and `MSR` instructions where we can't rely on the
assembler to do so for us.
In subsequent patches we'll need to map the same GPR names to integer
constants so that we can use this to build metadata for exception
fixups.
So that the we can use the mappings elsewhere, factor out the
definitions into a new <asm/gpr-num.h> header, renaming the definitions
to align with this "GPR num" naming for clarity.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20211019160219.5202-6-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
