interrupt-parent is not to be used as a boolean property.
It is already present in the DT in the proper way it's supposed to be used:
interrupt-parent = <&gic>;
This is also reported by dtbs_check:
arch/arm/boot/dts/at91-sama7g5ek.dtb: interrupt-controller@e8c11000: interrupt-parent: True is not of type 'array'
From schema: /.local/lib/python3.8/site-packages/dtschema/schemas/interrupts.yaml
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220503133127.64320-1-eugen.hristev@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Crypto module atsha204a is available at i2c address 0x64. Module is used
for symmetric cryptography and provides also hardware random number
generator and OTP storage for device serial number and MAC addresses.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Naming and flag corrections.
* tag 'v5.19-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: rename pcfg_pull_default node name on rk3036
ARM: dts: rockchip: use generic node name for dma rk3036/rk322x
ARM: dts: rockchip: correct interrupt flags on rk3188 boards
Link: https://lore.kernel.org/r/6919636.31r3eYUQgx@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX ARM device tree update for 5.19:
- New board support: PHYTEC phyGATE-Tauri-S, TQ-Systems MBa6UL,
LS1021A IoT board, Toradex Iris and Aster carrier, i.MX7D SMEGW01,
i.MXRT1050 EVK, Bosch ACC board.
- A series from Alexander Stein to update i.MX51 based digi-connectcore
board, regarding to DMA of UART devices, PMIC voltages, USB
vbus-supply and usbphy.
- A series of changes from David Jander and Oleksij Rempel to remove
prototype specific deprecated code not used in production from
i.MX6Q/DL Vicut1 board, and unify Vicut1 and Victgo variants to reduce
maintaining overhead.
- Quite some changes from different people to update imx6ull-colibri board
on various aspects, touchscreen, device tree overlays, NAND BCH geometry,
GPIO line names, FEC phy-supply, etc.
- A couple of changes from Fabio Estevam to switch imx6dl-plybas and
imx6ul-kontron-n6x1x-s to use standard 'uart-has-rtscts' property.
- A couple of patches from Li Yang to update IFC device compatible and
node name for LayerScape SoCs.
- Disable USB host to work around boot issue on imx6qdl-udoo board.
- A series from Max Krummenacher to update Colibri i.MX6DL device trees,
drop dedicated v1.1 DT, disable add-on accessories, cleanups, etc.
- Various random and small updates on i.MX28 and i.MX6 boards.
* tag 'imx-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits)
ARM: dts: imx6ull-colibri: improve pinctrl node names
ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi
ARM: dts: imx6ull-colibri: add/update some comments
ARM: dts: imx6ull-colibri: fix nand bch geometry
ARM: dts: imx6ull-colibri: add support for toradex aster carrier boards
ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards
ARM: dts: imx6ull-colibri: add gpio-line-names
ARM: dts: imx6ull-colibri: update device trees to support overlays
ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling
ARM: dts: imx6ull-colibri: add touchscreen device nodes
ARM: dts: imx6ull-colibri: add phy-supply to fec
ARM: dts: imx6ull-colibri: change touch i2c parameters
ARM: dts: imx6ull-colibri: use pull-down for adc pins
ARM: dts: Add bosch acc board
ARM: dts: imx: Add i.MXRT1050-EVK support
ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board
ARM: dts: imx6qdl-udoo: Disable USB host to work around boot issues
ARM: dts: imx27: use new 'dma-channels' property
ARM: dts: imx6qdl-phytec: Add LED labels
ARM: dts: ls1021a: reduce the interrupt-map-mask
...
Link: https://lore.kernel.org/r/20220508033843.2773685-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM DT updates for v5.19
This contains a long overdue overhaul of the MSM8974 DeviceTrees,
aligning the style, structure and naming with what we've learned since
the introduction of this platform.
On top of this the Sony Rhine platform gained I2C masters, NFC and
pstore support and the Fairphone 2 gained touchscreen support.
For the new SDX65 platform reserved-memory nodes, rpmpd, SPMI, CPU
clocks, SDHCI controller, SMMU and TCSR mutex was added. As was the
initial DeviceTree for the related PMX65 PMIC.
MSM8226 gained VADC and RTC support and support for the ASUS ZenWatch 2
was added.
* tag 'qcom-dts-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (62 commits)
ARM: dts: qcom: msm8974-FP2: Add supplies for remoteprocs
ARM: dts: qcom: msm8974-FP2: Configure charger
ARM: dts: qcom: msm8974-FP2: Add support for touchscreen
ARM: dts: qcom: sdx55: Remove ipa interconnect node
ARM: dts: qcom: msm8974: Add missing license headers
ARM: dts: qcom: msm8974-FP2: Add mmc* aliases
ARM: dts: qcom: msm8974-FP2: We're msm8974pro
ARM: dts: qcom-msm8974*: Remove unnecessary include
ARM: dts: qcom-msm8974-rhine: Add pstore node
ARM: dts: qcom-msm8974-rhine: Add NFC and enable I2C hosts
ARM: dts: qcom-msm8974*: Clean up old GPIO declarations
ARM: dts: qcom-msm8974*: Consolidate I2C/UART/SDHCI
ARM: dts: qcom-msm8974*: Enable IMEM unconditionally
ARM: dts: qcom-msm8974: Sort and clean up nodes
ARM: dts: qcom-msm8974: Convert ADSP to a MMIO device
ARM: dts: qcom-msm8974pro-*: Use the 8974pro name in DT filenames
ARM: dts: qcom-msm8974pro: Use &labels
ARM: dts: qcom-msm8974-castor: Use &labels
ARM: dts: qcom-msm8974-{"hon","am"}ami: Commonize and modernize the DTs
ARM: dts: qcom-msm8974-klte: Use &labels
...
Link: https://lore.kernel.org/r/20220509172125.313259-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Keystone2 device tree updates for v5.19
* Cleanups for SPI NOR / flash
* tag 'ti-keystone-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
ARM: dts: keystone: Fix missing fallback and case in SPI NOR node compatible
ARM: dts: keystone: Align SPI NOR node name with dtschema
Link: https://lore.kernel.org/r/20220507163435.tcg46cacwqhe7n64@busily
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The gpio-keys define module level wake-up pin functionality. Move it
from the carrier board dts file to the Som dtsi file.
While at it, also re-order the properties in the gpio-keys node
alphabetically and rename to sub-node from power to wakeup.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add GPIO line names on module-level. Those are all GPIOs that a user
might use on his custom carrier board. If more meaningful names are
available on the carrier board, the user can overwrite the line names
in the carrier board-level device tree.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Prepare in-tree device trees for out-of-tree device tree overlay support
(eMMC SKU only).
Relocate panel-dpi default to edt,et057090dhu (RGB 18bit VGA 640x480)
to the module-level dtsi and remove it from the carrier board dtsi.
Keep backlight, resistive touch and Atmel maxtouch nodes enabled
for both eMMC and NAND modules.
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Due to many carrier boards pulling the usdhc1 signals up to 3.3 volt we
need to disable 1.8 volt signaling. Adding the no-1-8-v property
basically disables UHS-I modes by default.
Also pull-up the command and data lines to the +V3.3_1.8_SD rail and
set them to the 200 MHz speed grade (e.g. pinmux bits 7-6: meaning 11
SPEED_3_max_200MHz).
Explicitly specify a bus-width of <4> in the module-level device tree
include file and drop the no-1-8-v property from the carrier boards
device trees.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move all Atmel nodes from the board-level into the main module-level
device tree and prepare the device trees for use with Atmel MXT device
tree overlays. Also, add required pinmux groups.
The common scheme for pin groups in touch screen overlays is as follows:
- pinctrl_atmel_conn - SODIMM 106/107 pins for INT/RST signals (default)
- pinctrl_atmel_adap - SODIMM 28/30 pins for INT/RST signals.
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the proper phy-supply to the FEC. This supply is actually
switched by a clock that is now properly stated. This has the advantage
to add a delay for that particular regulator which is needed.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Renesas ARM DT updates for v5.19 (take two)
- I2C, sound, USB, CANFD, timer, watchdog, (Q)SPI, cpufreq, and
thermal support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK
development board,
- Initial support for the R-Car V4H SoC and the Renesas White Hawk
development board stack,
- DMA, RTC, and USB support for the RZ/N1D SoC,
- Initial support for the RZ/V2M SoC an the RZ/V2M Evaluation Kit
Board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (40 commits)
arm64: dts: renesas: Add initial device tree for RZ/V2M EVK
arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC
arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
ARM: dts: r9a06g032: Link the PCI USB devices to the USB PHY
ARM: dts: r9a06g032: Add USB PHY DT support
ARM: dts: r9a06g032: Add internal PCI bridge node
ARM: dts: r9a06g032: Describe the RTC
arm64: dts: renesas: Add interrupt-names to CANFD nodes
arm64: dts: renesas: r9a07g043: Add SPI Multi I/O Bus controller node
arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA
arm64: dts: renesas: r9a07g043: Add TSU node
arm64: dts: renesas: r9a07g043: Add OPP table
arm64: dts: renesas: r9a07g043: Add RSPI{0,1,2} nodes
arm64: dts: renesas: r9a07g054: Fix external clk node names
arm64: dts: renesas: r9a07g044: Fix external clk node names
ARM: dts: r9a06g032: Fix the NAND controller node
ARM: dts: r9a06g032: Fill the UART DMA properties
ARM: dts: r9a06g032: Describe the DMA router
ARM: dts: r9a06g032: Add the two DMA nodes
arm64: dts: renesas: Remove empty rgb output endpoints
...
Link: https://lore.kernel.org/r/cover.1651828603.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.19, part two
1. Cleanups: unused and undocumented dma-channels and dma-requests.
2. Correct compatible of Samsung EEPROM on S5PV210.
* tag 'samsung-dt-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: drop useless 'dma-channels/requests' properties
ARM: dts: s5pv210: drop useless 'dma-channels/requests' properties
ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM
Link: https://lore.kernel.org/r/20220506081438.149192-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Minor cleanup of ARM DTS for v5.19, part two
Align SPI NOR node names to DT schema and drop unused/undocumented
dma-channels/dma-requests.
* tag 'dt-cleanup-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: socfpga: drop useless 'dma-channels/requests' properties
ARM: dts: zynq-7000: drop useless 'dma-channels/requests' properties
ARM: dts: marvell: align SPI NOR node name with dtschema
ARM: dts: omap: align SPI NOR node name with dtschema
ARM: dts: nuvoton: align SPI NOR node name with dtschema
Link: https://lore.kernel.org/r/20220506081438.149192-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add device tree for the Bosch ACC board, based on i.MX6 Dual.
Signed-off-by: Philip Oberfichtner <pro@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The NXP i.MXRT1050 Evaluation Kit (EVK) provides a platform for rapid
evaluation of the i.MXRT, which features NXP's implementation of the Arm
Cortex-M7 core.
The EVK provides 32 MB SDRAM, 64 MB Quad SPI flash, Micro SD card socket,
USB 2.0 OTG.
This patch aims to support the preliminary booting up features
as follows:
GPIO
LPUART
SD/MMC
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
[Jesse: Add clock-parents, edma, usdhc, anatop, remove old pinctl]
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
UART 0 to 2 do not have DMA support, while UART 3 to 7 do.
Fill the "dmas" and "dma-names" properties for each of these nodes.
Please mind that these nodes go through the dmamux node which will
redirect the requests to the right DMA controller. The first 4 cells of
the "dmas" properties will be transferred as-is to the DMA
controllers. The last 2 cells are consumed by the dmamux. Which means
cell 0 and 4 are almost redundant, one giving the controller request ID
and the other the dmamux channel which is a 1:1 translation of the
request IDs, shifted by 16 when pointing to the second DMA controller.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220421095323.101811-11-miquel.raynal@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
More devicetree changes for omaps
Devicetree updates for few boards and more clean-up for make dtbs warnings:
- Updates for am335x-myirtech oscillator and mtd
- Firmware configuration for i2c voltage scaling and IO isolation for am3/4
that are wired for these features
- A series of omap3 clock node clean-up for make dtbs warnings for
unique_unit_address and node_name_chars_strict
- Updates for dma-channel usage to add the generic dma-common properties
* tag 'omap-for-v5.19/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits)
ARM: dts: dm81xx: use new 'dma-channels/requests' properties
ARM: dts: am33xx: use new 'dma-channels/requests' properties
ARM: dts: Group omap3 CM_CLKSEL1_EMU clocks
ARM: dts: Group omap3 CM_CLKSEL_PER clocks
ARM: dts: Group omap3 CM_ICLKEN_PER clocks
ARM: dts: Group omap3 CM_FCLKEN_PER clocks
ARM: dts: Group omap3 CM_FCLKEN_CAM clocks
ARM: dts: Group omap3 CM_CLKSEL_DSS clocks
ARM: dts: Group omap3 CM_FCLKEN_DSS clocks
ARM: dts: Group omap3 CM_CLKOUT_CTRL clocks
ARM: dts: Group omap3 CM_CLKSEL1_PLL clocks
ARM: dts: Group omap3 CM_CLKSEL_WKUP clocks
ARM: dts: Group omap3 CM_ICLKEN_WKUP clocks
ARM: dts: Group omap3 CM_FCLKEN_WKUP clocks
ARM: dts: Group omap3 CM_CLKSEL_CORE clocks
ARM: dts: Group omap3 CM_ICLKEN3_CORE clocks
ARM: dts: Group omap3 CM_ICLKEN1_CORE clocks
ARM: dts: Group omap3 crypto accelerator clocks
ARM: dts: Group omap3 CM_FCLKEN1_CORE clocks
ARM: dts: Group omap3 CONTROL_DEVCONF1 clocks
...
Link: https://lore.kernel.org/r/pull-1651726643-535261@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.19, please pull the following:
- Oleksij fixes the ethernet node name for the USB Ethernet adapter on
BCM283x (Raspberry Pi 1/2/3) platforms
- Kuldeep fixes the PL022 SPI controller clock names to conform to the
binding
- Rafal updates the various BCM5301X (Northstar) Device Tree include
files to be dtsschema conforming for pinctrl, NAND
- Arinc adds the Asus RT-AC88U binding, removes some unnecessary
properties of the Ethernet switch DT node, populates the correct PHY
interface for port 5 of the switch, adds support for fetching the MAC
address from the NVMEM provider and finally disables gmac0 on that
device which is unused
- Phil updates the Raspberry Pi 1/2/3 DTS files to have the latest gpio
line names conforming to the printed circuit board layout
- Krzysztof updates various Broadcom DTS files to have a conforming SPI
nor Device Tree node
- Takayoshi adds support for the Buffalo WZR-1166DHP/WZR-1166DHP2
wireless routers based on the BCM4708 SoC
- William adds support for the BCM47622 ARMv7 Broadband SoC and provides
a basic DTS to boot upstream Linux on such a system
* tag 'arm-soc/for-5.19/devicetree' of https://github.com/Broadcom/stblinux: (22 commits)
ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
ARM: dts: add dts files for bcmbca soc 47622
dt-bindings: arm: add bcmbca device tree binding document
ARM: dts: bcm283x: Align ETH_CLK GPIO line name
ARM: dts: bcm283x: Remove gpio line name NC
ARM: dts: bcm2835-rpi-b: Fix GPIO line names
ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED
ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C
ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus RT-AC88U
ARM: dts: broadcom: align SPI NOR node name with dtschema
dt-bindings: arm: bcm: add bindings for Asus RT-AC88U
ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoC
dt-bindings: arm: bcm: create new description for BCM53016
dt-bindings: arm: bcm: fix BCM53012 and BCM53016 SoC strings
ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on Asus RT-AC88U
ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on Asus RT-AC88U
ARM: dts: BCM5301X: Remove cell properties from srab ports on Asus RT-AC88U
ARM: dts: BCM5301X: Fix DTC warning for NAND node
ARM: dts: BCM5301X: Update pin controller node name
...
Link: https://lore.kernel.org/r/20220504210942.1838248-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v5.19, round 1
Highlights:
----------
-MCU:
-Fix pinctrl node names to match with pinctrl yaml.
- MPU:
-General:
- Fix pinctrl node names to match with pinctrl yaml.
- Add Protonics boards support based on STM32MP151A SoC:
- PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
TI and Micrel 10BaseT Phys and wifi support.
- PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
and CO2 sensors.
- PRTT1A - 10BaseT1L multi functional controller.
- ST boards:
- Add RTC support on stm32mp13.
- Add button and heartbit support on stm32mp13 DK board.
- Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
on OP-TEE OS and SCMI protocol.
- DH boards:
- Use MCO2 to generate PHY clock and ETHRX clock in order to release
internal PLL for a better SD card usage.
- Add 1ms PHY post-reset on Avenger96 board to match with PHY
requirements.
* tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
dt-bindings: reset: stm32mp15: rename RST_SCMI define
dt-bindings: clock: stm32mp15: rename CK_SCMI define
dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"
dt-bindings: rcc: Add optional external ethernet RX clock properties
ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
ARM: dts: stm32: add support for Protonic PRTT1x boards
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards
dt-bindings: arm: stm32: correct blank lines
dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
ARM: dts: stm32: enable RTC support on stm32mp135f-dk
ARM: dts: stm32: add RTC node on stm32mp131
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
...
Link: https://lore.kernel.org/r/5818c943-882d-7e50-430d-ae3299a108ee@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
