Commit Graph

276 Commits

Author SHA1 Message Date
Tony Lindgren
770b6cb4d2 ARM: OMAP: Fix drivers to depend on omap for internal devices
These devices are not available on other architectures, so
let's limit them to omap.

If the driver subsystem maintainers want to build test
system wide changes without building for each target,
it's easy to carry a test patch that just strips out the
depends entries from Kconfig files.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-16 15:23:37 -08:00
Pantelis Antoniou
8a1861d997 w1-gpio: Simplify & get rid of defines
There's no reason to have the OF defines; it complicates the driver.
There's also no need for the funky platform_driver_probe.

Add a few warnings in case there's a failure; helps us find out
what went wrong.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26 16:16:35 -08:00
Pantelis Antoniou
277ed0d542 w1-gpio: Pinctrl-fy
Enable pinctrl for w1-gpio.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26 16:16:25 -08:00
Bill Pemberton
2c9e9fdc0b w1: remove CONFIG_HOTPLUG ifdefs
Remove conditional code based on CONFIG_HOTPLUG being false.  It's
always on now in preparation of it going away as an option.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 12:42:25 -08:00
Bill Pemberton
82849a93aa w1: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 12:42:25 -08:00
Bill Pemberton
479e2bcecd w1: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 12:42:25 -08:00
Bill Pemberton
f91a66c97b w1: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 12:42:25 -08:00
Fabio Estevam
128485daad w1: mxc_w1: Fix comment
We are dealing with mxc_w1 registers.

While at it use dev_err() instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 12:40:14 -08:00
Fabio Estevam
fd21bfcc2d w1: mxc_w1: Convert to platform driver
Using module_platform_driver() makes the code smaller and cleaner.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 12:40:14 -08:00
Fabio Estevam
99ba2fd297 w1: mxc_w1: Adapt the clock name to the new clock framework
With the new i.mx clock framework the mxc_w1 clock is registered as:

clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");

So we do not need to pass "owire" string and can use NULL instead.

While at it, also fix the clock error handling code.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
-----
Changes since v2:
- Add Ack's
Changes since v1:
- Fix clock error handling
 drivers/w1/masters/mxc_w1.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 12:40:14 -08:00
Wei Yongjun
dbfd5ccc05 w1/ds2482: use module_i2c_driver to simplify the code
Use the module_i2c_driver() macro to make the code smaller
and a bit simpler.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24 15:52:29 -07:00
Kees Cook
12b9f8a20d drivers/w1/masters: remove CONFIG_EXPERIMENTAL
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

CC: Andrew Morton <akpm@linux-foundation.org>
CC: Paul Walmsley <paul@pwsan.com>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24 15:52:29 -07:00
Linus Torvalds
3aebd34b12 char/misc driver merge for 3.7-rc1
Here is the "big" char/misc driver tree update for the 3.7-rc1 merge
 window.
 
 Nothing major, just a number of driver updates and fixes, all of which
 have been in the linux-next releases for a while now either in my tree,
 or in Andrew's (the lis3l driver changes came from his tree last week).
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlBp3pcACgkQMUfUDdst+ymLswCcDYG9RkRcEdYwT5bOm1zM4IVl
 WM0AoLKfC86g6xe4MdS7zROJn7ep/9qu
 =zAHk
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver merge from Greg Kroah-Hartman:
 "Here is the "big" char/misc driver tree update for the 3.7-rc1 merge
  window.

  Nothing major, just a number of driver updates and fixes, all of which
  have been in the linux-next releases for a while now either in my
  tree, or in Andrew's (the lis3l driver changes came from his tree last
  week).

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (52 commits)
  drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree init
  drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree init
  drivers/misc/lis3lv02d: remove lis3lv02d driver DT init
  drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru code
  drivers/misc/lis3lv02d: add generic DT matching code
  lis3lv02d: fix some comments specific to lis331dlh driver
  MISC: hpilo, remove pci_disable_device
  pcmcia: synclink_cs: fix potential tty NULL dereference
  drivers/char/mmtimer.c: Remove useless kfree
  drivers/char: removes unnecessary semicolon
  char/misc: remove CONFIG_EXPERIMENTAL dependencies
  mei: don't print buffer as a string
  mei: struct mei_message_data doesn't have to be packed
  mei: add error messages for open count errors
  misc: use module_spi_driver
  tifm: use module_pci_driver
  misc/at25, dt: Improve at25 SPI eeprom device tree bindings.
  mei: add lynx point pci device ids
  mei: fix max number of open handles
  mei: rename struct pci_dev *mei_device to mei_pdev
  ...
2012-10-01 12:09:59 -07:00
Linus Torvalds
99dbb1632f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull the trivial tree from Jiri Kosina:
 "Tiny usual fixes all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  doc: fix old config name of kprobetrace
  fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
  btrfs: fix the commment for the action flags in delayed-ref.h
  btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
  vfs: fix kerneldoc for generic_fh_to_parent()
  treewide: fix comment/printk/variable typos
  ipr: fix small coding style issues
  doc: fix broken utf8 encoding
  nfs: comment fix
  platform/x86: fix asus_laptop.wled_type module parameter
  mfd: printk/comment fixes
  doc: getdelays.c: remember to close() socket on error in create_nl_socket()
  doc: aliasing-test: close fd on write error
  mmc: fix comment typos
  dma: fix comments
  spi: fix comment/printk typos in spi
  Coccinelle: fix typo in memdup_user.cocci
  tmiofb: missing NULL pointer checks
  tools: perf: Fix typo in tools/perf
  tools/testing: fix comment / output typos
  ...
2012-10-01 09:06:36 -07:00
Anatol Pomozov
4907cb7b19 treewide: fix comment/printk/variable typos
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-01 10:33:05 -07:00
Greg Kroah-Hartman
7da59d2fe3 Merge v3.6-rc3 into 'char-misc-next'
This resolves a conflict in:
	drivers/misc/mei/interrupt.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-27 09:09:07 -07:00
Raphael Assenat
f3261dfb55 1-Wire: Add support for the maxim ds1825 temperature sensor
This patch adds support for maxim ds1825 based 1-wire temperature sensors.

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 12:33:59 -07:00
Daniel Mack
d2323cf773 onewire: w1-gpio: add ext_pullup_enable pin in platform data
In the process of porting boards to devicetree implemenation, we should
keep information about external circuitry where they belong - the
individual drivers.

This patch adds a way to specify a GPIO to drive the (optional) external
pull-up logic, rather than using a function pointer for that.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 10:02:33 -07:00
Daniel Mack
5f3d1382e3 onewire: w1-gpio: add DT bindings
This patch add DT bindings to the w1-gpio driver, along with some
documentation on how to use them.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 10:00:23 -07:00
Felipe Balbi
73f2989d37 w1: omap-hdq: drop ARCH dependency
Let the driver compile everywhere while
also removing unnecessary headers.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 09:58:45 -07:00
Felipe Balbi
042a713fa4 w1: omap-hdq: remove unnecessary return
trivial patch, no functional changes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 09:58:44 -07:00
Felipe Balbi
19afea50f1 w1: omap-hdq: convert to devm_* functions
this lets us remove a bit of boilerplate code.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 09:58:43 -07:00
Felipe Balbi
8650bbb580 w1: omap-hdq: convert to module_platform_driver
trivial patch, no functional changes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 09:58:43 -07:00
Felipe Balbi
be6ec64a1b w1: omap-hdq: don't hardcode resource size
we have the helpful resource_size() macro to
calculate the size of the memory resource for
us, let's use it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 09:58:43 -07:00
Felipe Balbi
8c3db42fea w1: omap-hdq: add section annotation to remove
trivial patch, no functional changes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 09:58:43 -07:00
Linus Torvalds
fa93669a19 Driver core merge for 3.6-rc1
Here's the big driver core pull request for 3.6-rc1.
 
 Unlike 3.5, this kernel should be a lot tamer, with the printk changes now
 settled down.  All we have here is some extcon driver updates, w1 driver
 updates, a few printk cleanups that weren't needed for 3.5, but are good to
 have now, and some other minor fixes/changes in the driver core.
 
 All of these have been in the linux-next releases for a while now.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAlARgIUACgkQMUfUDdst+ynDHgCfRNwIB9L+zZvjcKE5e1BhDbUl
 wVUAn398DFgbJ1+PjGkd1EMR2uVTh7Ou
 =MIFu
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core changes from Greg Kroah-Hartman:
 "Here's the big driver core pull request for 3.6-rc1.

  Unlike 3.5, this kernel should be a lot tamer, with the printk changes
  now settled down.  All we have here is some extcon driver updates, w1
  driver updates, a few printk cleanups that weren't needed for 3.5, but
  are good to have now, and some other minor fixes/changes in the driver
  core.

  All of these have been in the linux-next releases for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  printk: Export struct log size and member offsets through vmcoreinfo
  Drivers: hv: Change the hex constant to a decimal constant
  driver core: don't trigger uevent after failure
  extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
  sysfs: fail dentry revalidation after namespace change fix
  sysfs: fail dentry revalidation after namespace change
  extcon: spelling of detach in function doc
  extcon: arizona: Stop microphone detection if we give up on it
  extcon: arizona: Update cable reporting calls and split headset
  PM / Runtime: Do not increment device usage counts before probing
  kmsg - do not flush partial lines when the console is busy
  kmsg - export "continuation record" flag to /dev/kmsg
  kmsg - avoid warning for CONFIG_PRINTK=n compilations
  kmsg - properly print over-long continuation lines
  driver-core: Use kobj_to_dev instead of re-implementing it
  driver-core: Move kobj_to_dev from genhd.h to device.h
  driver core: Move deferred devices to the end of dpm_list before probing
  driver core: move uevent call to driver_register
  driver core: fix shutdown races with probe/remove(v3)
  Extcon: Arizona: Add driver for Wolfson Arizona class devices
  ...
2012-07-26 11:25:33 -07:00
Paul Walmsley
c354a86484 W1: OMAP HDQ1W: use runtime PM
Convert the OMAP HDQ driver to use runtime PM.  Compile- and boot-tested,
but not tested in actual use.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Tested-by: NeilBrown <neilb@suse.de>
2012-06-21 21:40:40 -06:00
Paul Walmsley
2acd089471 W1: OMAP HDQ1W: use 32-bit register accesses
HDQ/1-wire registers are 32 bits long, even if the register contents
fit into 8 bits, so accesses must be 32-bit aligned.  Evidently the
OMAP2/3 interconnects allowed the driver to get away with 8 bit accesses,
but the OMAP4 puts a stop to that:

[    1.488800] Driver for 1-wire Dallas network protocol.
[    1.495025] Bad mode in data abort handler detected
[    1.500122] Internal error: Oops - bad mode: 0 [#1] SMP
[    1.505615] Modules linked in:
[    1.508819] CPU: 0    Not tainted  (3.3.0-rc1-00008-g45030e9 #992)
[    1.515289] PC is at 0xffff0018
[    1.518615] LR is at omap_hdq_probe+0xd4/0x2cc

The OMAP4430 ES2 Rev X TRM does warn about this restriction in section
23.2.6.2 "HDQ/1-Wire Registers".

Fixes the crash on OMAP4430 ES2 Pandaboard.  Tested also on OMAP34xx and
OMAP2420; it seems to work fine on those chips, although due to the lack
of boards with HDQ/1-wire devices here, a more indepth test was not
possible.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
2012-06-21 21:40:37 -06:00
Paul Walmsley
d660030061 W1: OMAP HDQ1W: allow driver to be built on all OMAP2+
Allow the OMAP HDQ1W driver to be built for all OMAP2+ SoCs by
adjusting KConfig dependencies.  The previous dependency required
either SOC_OMAP2430 or ARCH_OMAP3 to be set, but the HDQ IP block is
present on OMAP2420 and OMAP44xx SoCs.  The driver was still
selectable on multi-OMAP kernel configurations, however; so the
previous prohibition was rather pointless.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
2012-06-21 21:40:37 -06:00
Otavio Salvador
679012655a w1: Fix a typo in 'hardware' word
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-18 16:41:06 -07:00
Markus Franke
fbf7f7b4e2 w1: Add 1-wire slave device driver for DS28E04-100
Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 16:47:10 -07:00
NeilBrown
b02f8bede2 W1: split master mutex to avoid deadlocks.
The 'mutex' in struct w1_master is use for two very different
purposes.

Firstly it protects various data structures such as the list of all
slaves.

Secondly it protects the w1 buss against concurrent accesses.

This can lead to deadlocks when the ->probe code called while adding a
slave needs to talk on the bus, as is the case for power_supply
devices.
ds2780 and ds2781 drivers contain a work around to track which
process hold the lock simply to avoid this deadlock.  bq27000 doesn't
have that work around and so deadlocks.

There are other possible deadlocks involving sysfs.
When removing a device the sysfs s_active lock is held, so the lock
that protects the slave list must take precedence over s_active.
However when access power_supply attributes via sysfs, the s_active
lock must take precedence over the lock that protects accesses to
the bus.

So to avoid deadlocks between w1 slaves and sysfs, these must be
two separate locks.  Making them separate means that the work around
in ds2780 and ds2781 can be removed.

So this patch:
 - adds a new mutex: "bus_mutex" which serialises access to the bus.
 - takes in mutex in w1_search and ds1wm_search while they access
   the bus for searching.  The mutex is dropped before calling the
   callback which adds the slave.
 - changes all slaves to use bus_mutex instead of mutex to
   protect access to the bus
 - removes w1_ds2790_io_nolock and w1_ds2781_io_nolock, and the
   related code from drivers/power/ds278[01]_battery.c which
   calls them.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 16:38:40 -07:00
NeilBrown
b7e938d06d w1: omap_hdq: use wait_event_timeout to wait for read to complete.
There is no gain in having a loop - there is no risk of missing the
interrupt with wait_event_timeout.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 16:37:04 -07:00
NeilBrown
7b5362a603 w1: omap_hdq: Fix some error/debug handling.
- some debug messages missed spaces
- sometimes no error was returned when it should have been
- sometimes a message is printed when there is no error, rather
  than when there is one.

Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 16:37:04 -07:00
Greg Kroah-Hartman
dd0aa67cd7 Revert "w1: introduce a slave mutex for serializing IO"
This reverts commit 59d4467be4.

Turns out it was the wrong version, will apply the correct version after
this.

Reported-by: NeilBrown <neilb@suse.de>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 16:33:54 -07:00
Devendra Naga
526be41625 w1: cleanup w1_uevent
There were some return statements around in the w1_uevent, used goto
to cleanup those return statements with the help of err variable,
and also removed a semi colon at the end of the w1_uevent's closing
brace.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12 15:27:32 -07:00
NeilBrown
59d4467be4 w1: introduce a slave mutex for serializing IO
w1 devices need a mutex to serial IO.  Most use master->mutex.
However that is used for other purposes and they can conflict.

In particular master->mutex is held while w1_attach_slave_device is
called.

For bq27000, this registers a 'powersupply' device which tries to read the
current status.  The attempt to read will cause a deadlock on
master->mutex.

So create a new per-slave mutex and use that for serializing IO for
bq27000.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12 15:27:32 -07:00
Linus Torvalds
2795343705 arm-soc: clock driver changes
The new clock subsystem was merged in linux-3.4 without any users, this
 now moves the first three platforms over to it: imx, mxs and spear.
 
 The series also contains the changes for the clock subsystem itself,
 since Mike preferred to have it together with the platforms that require
 these changes, in order to avoid interdependencies and conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuexPAAoJEIwa5zzehBx3YBsP/0nFhXjb5t1PdLfFzGKtcZVB
 j4zXWXMHQ1fA7wIfEpZF3Nnco6MQkufF5wJPoPdn1+wmkzCn3D6IwNVWVtW4U5i9
 VGyShSbgusAAYXUe/9yYj8eN+bbRQSvdN4eWYWU6+rRXShGZ5dZZmp+IPNl54dnW
 6F8uCnHX0cnIMCpGqV+41zZgZ/4wL2k9gdqu0LO6pi07o4tGd0Z4gcySgUFAnn1R
 kofNHueYIP4UgOg8DREoBzVKlpRqMou3S2kSZUfMeb3Q9ryF7UIvaGqIILyi7PKL
 kWd3nptg0EPavfL21SwXHiGpnDpB/Gj/F70kcPLus5RYujB24C9bvBmc26z68NZx
 Sz9mbElkkIU5duZsl1nxBWJ8IZ/tSWdtmC2xQMznmV7gHyGgVwr4j47f4Uv5sBvM
 14JHDO7mqN6E6FnTFZu/oPAN5pDjgL+TVNK5BU6Wkq0zitrA6eyKDqCvBCqkO6Nn
 tNzOuyRDzMOwM7HzqXhxqtzJWXylO1Mldc4bM8X4Cocf4pnLna/X6uP6dgE6A+JY
 azVYx4I/0NdEPerDTzIcEhBDgZeBVROhUQr+kHxc4rf6WzUUbu/wEo1UKXWV66oW
 1jb1yAFFWqYjkQuQc2PD4JSx35sFJaoSaoneRtmzBzRDfzSr5KjKj1E0e1skyMFq
 7ZVLCqZD0cB9DhmMDkWP
 =rwFF
 -----END PGP SIGNATURE-----

Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...
2012-05-26 12:42:29 -07:00
Linus Torvalds
e8650a0823 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "As usual, it's mostly typo fixes, redundant code elimination and some
  documentation updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
  edac, mips: don't change code that has been removed in edac/mips tree
  xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
  lib: Change mail address of Oskar Schirmer
  net: Change mail address of Oskar Schirmer
  arm/m68k: Change mail address of Sebastian Hess
  i2c: Change mail address of Oskar Schirmer
  net: Fix tcp_build_and_update_options comment in struct tcp_sock
  atomic64_32.h: fix parameter naming mismatch
  Kconfig: replace "--- help ---" with "---help---"
  c2port: fix bogus Kconfig "default no"
  edac: Fix spelling errors.
  qla1280: Remove redundant NULL check before release_firmware() call
  remoteproc: remove redundant NULL check before release_firmware()
  qla2xxx: Remove redundant NULL check before release_firmware() call.
  aic94xx: Get rid of redundant NULL check before release_firmware() call
  tehuti: delete redundant NULL check before release_firmware()
  qlogic: get rid of a redundant test for NULL before call to release_firmware()
  bna: remove redundant NULL test before release_firmware()
  tg3: remove redundant NULL test before release_firmware() call
  typhoon: get rid of redundant conditional before all to release_firmware()
  ...
2012-05-22 19:22:50 -07:00
Paul Bolle
d132d7f6fb Kconfig: replace "--- help ---" with "---help---"
There are three Kconfig entries with "--- help ---" attributes, and over
2000 Kconfig entries with "---help---" attributes.  Apparently the three
attributes with embedded spaces are valid. Still, I see little reason
for using this obscure variant. And replacing those three attributes
with the common variant makes grepping Kconfig files for help texts a
bit easier too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-07 15:01:22 +02:00
H Hartley Sweeten
4ae68e7345 w1: w1_ds2408.c: quite sparse noise about using plaing integer as NULL pointer
NULL not 0 should be used with pointers. Just remove the offending
lines since they will default to NULL anyway.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 16:25:30 -07:00
Greg Kroah-Hartman
c0a6720977 Revert "w1: Add 1-wire slave device driver for DS28E04-100"
This reverts commit f19420c1ac.

It contained lots of errors and warnings and shouldn't have ever been
applied, that was my fault, sorry.

Cc: Markus Franke <markus.franke@s2002.tu-chemnitz.de>
Cc: Evgeniy Polyakov <zbr@ioremap.net>,
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:12:08 -04:00
Sascha Hauer
60178b6329 w1 i.MX: prepare/unprepare clock
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-25 17:03:41 +02:00
Dan Carpenter
eda70f1dfc w1: w1_ds28e04: unlock on error path in w1_f1C_write_pio()
We should unlock here before returning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18 15:37:35 -07:00
Markus Franke
8f1e12512e w1: Disable irqs during 1-wire bus operations, extend 1-wire reset pulse
This patch offers the possibility to disables irqs during w1_write_bit()
and w1_reset_bus() operations as timing requirements are very strict for
the 1-wire bus protocol. Per default interrupts are enabled but can be
disabled via the module parameter "w1_disable_irqs".

Extend 1-wire reset pulse length from 480us to 500us as 480us is the
minimum requirement for the 1-wire reset/presence pulse.

Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-11 16:44:10 -07:00
Markus Franke
f19420c1ac w1: Add 1-wire slave device driver for DS28E04-100
This patch adds a 1-wire slave device driver for the DS28E04-100.

Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-11 16:44:10 -07:00
Dmitry Artamonow
ecf1948985 w1: fix slave driver registration error message
W1 core prints "Failed to register master driver" if error happens
on registering SLAVE driver. Fix it.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09 15:05:47 -07:00
Jiri Kosina
e75d660672 Merge branch 'master' into for-next
Merge with latest Linus' tree, as I have incoming patches
that fix code that is newer than current HEAD of for-next.

Conflicts:
	drivers/net/ethernet/realtek/r8169.c
2012-04-08 21:48:52 +02:00
Dmitry Artamonow
a03abdcb8e w1: fix slave driver registration error message
W1 core prints "Failed to register master driver" if error happens
on registering SLAVE driver. Fix it.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-03 03:38:14 +02:00
Renata Sayakhova
fef37e9a47 DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers
Signed-off-by: Renata Sayakhova <rsayakhova@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:15:33 -08:00