In the bellow commit, we added support for PPS policing without
removing the check which block offload of such cases.
Fix it by removing this check.
Fixes: a8d52b024d ("net/mlx5e: TC, Support offloading police action")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
DMA sync functions should use the same direction that was used by DMA
mapping. Use DMA_BIDIRECTIONAL for XDP_TX from regular RQ, which reuses
the same mapping that was used for RX, and DMA_TO_DEVICE for XDP_TX from
XSK RQ and XDP_REDIRECT, which establish a new mapping in this
direction. On the RX side, use the same direction that was used when
setting up the mapping (DMA_BIDIRECTIONAL for XDP, DMA_FROM_DEVICE
otherwise).
Also don't skip sync for device when establishing a DMA_FROM_DEVICE
mapping for RX, as some architectures (ARM) may require invalidating
caches before the device can use the mapping. It doesn't break the
bugfix made in
commit 0b7cfa4082 ("net/mlx5e: Fix page DMA map/unmap attributes"),
since the bug happened on unmap.
Fixes: 0b7cfa4082 ("net/mlx5e: Fix page DMA map/unmap attributes")
Fixes: b5503b994e ("net/mlx5e: XDP TX forwarding support")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The commit cited below started using the firmware capability for the
maximum TX WQE size. This commit adds an important check to verify that
the driver doesn't attempt to exceed this capability, and also restores
another check mistakenly removed in the cited commit (a WQE must not
exceed the page size).
Fixes: c27bd1718c ("net/mlx5e: Read max WQEBBs on the SQ from firmware")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case PCI reads fail after unload, there is no use in trying to
load the device.
Fixes: 5ec697446f ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
No need to rollback to the other mode because probably will fail
again. Just set to legacy mode and clear fdb table created flag.
So that fdb table will not be cleared again.
Fixes: f019679ea5 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
For a single CPU system, the kernel thread executing mlx5_cmd_flush()
never releases the CPU but calls down_trylock(&cmd→sem) in a busy loop.
On a single processor system, this leads to a deadlock as the kernel
thread which executes mlx5_cmd_invoke() never gets scheduled. Fix this,
by adding the cond_resched() call to the loop, allow the command
completion kernel thread to execute.
Fixes: 8e715cd613 ("net/mlx5: Set command entry semaphore up once got index free")
Signed-off-by: Alexander Schmidt <alexschm@de.ibm.com>
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mlx5 LAG is initialized asynchronously on a workqueue which means that for
a brief moment after setting mlx5 UL representors as lower devices of a
bond netdevice the LAG itself is not fully initialized in the driver. When
adding such bond device to a bridge mlx5 bridge code will not consider it
as offload-capable, skip creating necessary bookkeeping and fail any
further bridge offload-related commands with it (setting VLANs, offloading
FDBs, etc.). In order to make the error explicit during bridge
initialization stage implement the code that detects such condition during
NETDEV_PRECHANGEUPPER event and returns an error.
Fixes: ff9b752146 ("net/mlx5: Bridge, support LAG")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Before version 15.0.0 llvm's integrated assembler may silently
generate corrupted code on s390. See e.g. commit e9953b729b
("s390/boot: workaround llvm IAS bug") for further details.
While there have been workarounds applied for all known existing
locations, there is nothing that prevents that new code with
problematic patterns will be added.
Therefore raise the minimum clang version to 15.0.0. Note that llvm
commit e547b04d5b2c ("[SystemZ] Bugfix for symbolic displacements."),
which is included in 15.0.0, fixes the broken code generation.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221031123456.3872220-1-hca@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----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=vLqb
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
A PCI allocation fix and a PV clock fix.
The AMD PerfMonV2 specification allows for a maximum of 16 GP counters,
but currently only 6 pairs of MSRs are accepted by KVM.
While AMD64_NUM_COUNTERS_CORE is already equal to 6, increasing without
adjusting msrs_to_save_all[] could result in out-of-bounds accesses.
Therefore introduce a macro (named KVM_AMD_PMC_MAX_GENERIC) to
refer to the number of counters supported by KVM.
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220919091008.60695-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Intel Architectural IA32_PMCx MSRs addresses range allows for a
maximum of 8 GP counters, and KVM cannot address any more. Introduce a
local macro (named KVM_INTEL_PMC_MAX_GENERIC) and use it consistently to
refer to the number of counters supported by KVM, thus avoiding possible
out-of-bound accesses.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220919091008.60695-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SDM lists an architectural MSR IA32_CORE_CAPABILITIES (0xCF)
that limits the theoretical maximum value of the Intel GP PMC MSRs
allocated at 0xC1 to 14; likewise the Intel April 2022 SDM adds
IA32_OVERCLOCKING_STATUS at 0x195 which limits the number of event
selection MSRs to 15 (0x186-0x194).
Limiting the maximum number of counters to 14 or 18 based on the currently
allocated MSRs is clearly fragile, and it seems likely that Intel will
even place PMCs 8-15 at a completely different range of MSR indices.
So stop at the maximum number of GP PMCs supported today on Intel
processors.
There are some machines, like Intel P4 with non Architectural PMU, that
may indeed have 18 counters, but those counters are in a completely
different MSR address range and are not supported by KVM.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Fixes: cf05a67b68 ("KVM: x86: omit "impossible" pmu MSRs from MSR list")
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220919091008.60695-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly print the VMSA dump at KERN_DEBUG log level, KERN_CONT uses
KERNEL_DEFAULT if the previous log line has a newline, i.e. if there's
nothing to continuing, and as a result the VMSA gets dumped when it
shouldn't.
The KERN_CONT documentation says it defaults back to KERNL_DEFAULT if the
previous log line has a newline. So switch from KERN_CONT to
print_hex_dump_debug().
Jarkko pointed this out in reference to the original patch. See:
https://lore.kernel.org/all/YuPMeWX4uuR1Tz3M@kernel.org/
print_hex_dump(KERN_DEBUG, ...) was pointed out there, but
print_hex_dump_debug() should similar.
Fixes: 6fac42f127 ("KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog")
Signed-off-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Harald Hoyer <harald@profian.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Message-Id: <20221104142220.469452-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update EXIT_REASONS from source, including VMX_EXIT_REASONS,
SVM_EXIT_REASONS, AARCH64_EXIT_REASONS, USERSPACE_EXIT_REASONS.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_00082C8BFA925A65E11570F417F1CD404505@qq.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The first field in /proc/mounts can be influenced by unprivileged users
through the widespread `fusermount` setuid-root program. Example:
```
user$ mkdir ~/mydebugfs
user$ export _FUSE_COMMFD=0
user$ fusermount ~/mydebugfs -ononempty,fsname=debugfs
user$ grep debugfs /proc/mounts
debugfs /home/user/mydebugfs fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
```
If there is no debugfs already mounted in the system then this can be
used by unprivileged users to trick kvm_stat into using a user
controlled file system location for obtaining KVM statistics.
Even though the root user is not allowed to access non-root FUSE mounts
for security reasons, the unprivileged user can unmount the FUSE mount
before kvm_stat uses the mounted path. If it wins the race, kvm_stat
will read from the location where the FUSE mount resided.
Note that the files in debugfs are only opened for reading, so the
attacker can cause very large data to be read in by kvm_stat, or fake
data to be processed, but there should be no viable way to turn this
into a privilege escalation.
The fix is simply to use the file system type field instead. Whitespace
in the mount path is escaped in /proc/mounts thus no further safety
measures in the parsing should be necessary to make this correct.
Message-Id: <20221103135927.13656-1-matthias.gerstner@suse.de>
Signed-off-by: Matthias Gerstner <matthias.gerstner@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86_virt_spec_ctrl only deals with the paravirtualized
MSR_IA32_VIRT_SPEC_CTRL now and does not handle MSR_IA32_SPEC_CTRL
anymore; remove the corresponding, unused argument.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restoration of the host IA32_SPEC_CTRL value is probably too late
with respect to the return thunk training sequence.
With respect to the user/kernel boundary, AMD says, "If software chooses
to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel
exit), software should set STIBP to 1 before executing the return thunk
training sequence." I assume the same requirements apply to the guest/host
boundary. The return thunk training sequence is in vmenter.S, quite close
to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's
IA32_SPEC_CTRL value is not restored until much later.
To avoid this, move the restoration of host SPEC_CTRL to assembly and,
for consistency, move the restoration of the guest SPEC_CTRL as well.
This is not particularly difficult, apart from some care to cover both
32- and 64-bit, and to share code between SEV-ES and normal vmentry.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow access to the percpu area via the GS segment base, which is
needed in order to access the saved host spec_ctrl value. In linux-next
FILL_RETURN_BUFFER also needs to access percpu data.
For simplicity, the physical address of the save area is added to struct
svm_cpu_data.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Analyzed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is error-prone that code after vmexit cannot access percpu data
because GSBASE has not been restored yet. It forces MSR_IA32_SPEC_CTRL
save/restore to happen very late, after the predictor untraining
sequence, and it gets in the way of return stack depth tracking
(a retbleed mitigation that is in linux-next as of 2022-11-09).
As a first step towards fixing that, move the VMCB VMSAVE/VMLOAD to
assembly, essentially undoing commit fb0c4a4fee ("KVM: SVM: move
VMLOAD/VMSAVE to C code", 2021-03-15). The reason for that commit was
that it made it simpler to use a different VMCB for VMLOAD/VMSAVE versus
VMRUN; but that is not a big hassle anymore thanks to the kvm-asm-offsets
machinery and other related cleanups.
The idea on how to number the exception tables is stolen from
a prototype patch by Peter Zijlstra.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Link: <https://lore.kernel.org/all/f571e404-e625-bae1-10e9-449b2eb4cbd8@citrix.com/>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The svm_data percpu variable is a pointer, but it is allocated via
svm_hardware_setup() when KVM is loaded. Unlike hardware_enable()
this means that it is never NULL for the whole lifetime of KVM, and
static allocation does not waste any memory compared to the status quo.
It is also more efficient and more easily handled from assembly code,
so do it and don't look back.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "cpu" field of struct svm_cpu_data has been write-only since commit
4b656b1202 ("KVM: SVM: force new asid on vcpu migration", 2009-08-05).
Remove it.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pointer to svm_cpu_data in struct vcpu_svm looks interesting from
the point of view of accessing it after vmexit, when the GSBASE is still
containing the guest value. However, despite existing since the very
first commit of drivers/kvm/svm.c (commit 6aa8b732ca, "[PATCH] kvm:
userspace interface", 2006-12-10), it was never set to anything.
Ignore the opportunity to fix a 16 year old "bug" and delete it; doing
things the "harder" way makes it possible to remove more old cruft.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Continue moving accesses to struct vcpu_svm to vmenter.S. Reducing the
number of arguments limits the chance of mistakes due to different
registers used for argument passing in 32- and 64-bit ABIs; pushing the
VMCB argument and almost immediately popping it into a different
register looks pretty weird.
32-bit ABI is not a concern for __svm_sev_es_vcpu_run() which is 64-bit
only; however, it will soon need @svm to save/restore SPEC_CTRL so stay
consistent with __svm_vcpu_run() and let them share the same prototype.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
32-bit ABI uses RAX/RCX/RDX as its argument registers, so they are in
the way of instructions that hardcode their operands such as RDMSR/WRMSR
or VMLOAD/VMRUN/VMSAVE.
In preparation for moving vmload/vmsave to __svm_vcpu_run(), keep
the pointer to the struct vcpu_svm in %rdi. In particular, it is now
possible to load svm->vmcb01.pa in %rax without clobbering the struct
vcpu_svm pointer.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since registers are reachable through vcpu_svm, and we will
need to access more fields of that struct, pass it instead
of the regs[] array.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This already removes an ugly #include "" from asm-offsets.c, but
especially it avoids a future error when trying to define asm-offsets
for KVM's svm/svm.h header.
This would not work for kernel/asm-offsets.c, because svm/svm.h
includes kvm_cache_regs.h which is not in the include path when
compiling asm-offsets.c. The problem is not there if the .c file is
in arch/x86/kvm.
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pablo Neira Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Fix deadlock in nfnetlink due to missing mutex release in error path,
from Ziyang Xuan.
2) Clean up pending autoload module list from nf_tables_exit_net() path,
from Shigeru Yoshida.
3) Fixes for the netfilter's reverse path selftest, from Phil Sutter.
All of these bugs have been around for several releases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the R-Car MIPI DSI driver was added, it was a standalone encoder
driver without any dependency to or from the R-Car DU driver. Commit
957fe62d7d ("drm: rcar-du: Fix DSI enable & disable sequence") then
added a direct call from the DU driver to the MIPI DSI driver, without
updating Kconfig to take the new dependency into account. Fix it the
same way that the LVDS encoder is handled.
Fixes: 957fe62d7d ("drm: rcar-du: Fix DSI enable & disable sequence")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Although we don't use 1GB block mappings, we still need to split
map/unmap requests at 1GB boundaries to match what io-pgtable expects.
Fix that, and add some explanation to make sense of it all.
Fixes: 3740b08179 ("drm/panfrost: Update io-pgtable API")
Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/49e54bb4019cd06e01549b106d7ac37c3d182cd3.1667927179.git.robin.murphy@arm.com
Include linux/vmalloc.h in iosm_ipc_coredump.c &
iosm_ipc_devlink.c to resolve kernel test robot errors.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Data stall seen during peak DL throughput test & packets are
dropped by mux layer due to invalid header type in datagram.
During initlization Mux aggregration protocol is set to default
UL/DL size and TD count of Mux lite protocol. This configuration
mismatch between device and driver is resulting in data stall/packet
drops.
Override the UL/DL size and TD count for Mux aggregation protocol.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With INTEL_IOMMU disable config or by forcing intel_iommu=off from
grub some of the features of IOSM driver like browsing, flashing &
coredump collection is not working.
When driver calls DMA API - dma_map_single() for tx transfers. It is
resulting in dma mapping error.
Set the device DMA addressing capabilities using dma_set_mask() and
remove the INTEL_IOMMU dependency in kconfig so that driver follows
the platform config either INTEL_IOMMU enable or disable.
Fixes: f7af616c63 ("net: iosm: infrastructure")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to
obtain the wwan power state configuration from BIOS but is
not freeing the acpi_object. The acpi_evaluate_dsm() returned
acpi_object to be freed.
Free the acpi_object after use.
Fixes: 7e98d785ae ("net: iosm: entry point")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since model_number is allocated before it needs to be freed before
kmemdump_nul.
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The driver is spamming the kernel logs for entirely harmless errors from
user space submitting unsupported commands. Just silence the errors.
The application has direct access to command status, so there's no need
to log these.
And since every passthrough command now uses the quiet flag, move the
setting to the common initializer.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Syzbot reported a slab-out-of-bounds Write bug:
loop0: detected capacity change from 0 to 2048
==================================================================
BUG: KASAN: slab-out-of-bounds in udf_find_entry+0x8a5/0x14f0
fs/udf/namei.c:253
Write of size 105 at addr ffff8880123ff896 by task syz-executor323/3610
CPU: 0 PID: 3610 Comm: syz-executor323 Not tainted
6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS
Google 10/11/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:284
print_report+0x107/0x1f0 mm/kasan/report.c:395
kasan_report+0xcd/0x100 mm/kasan/report.c:495
kasan_check_range+0x2a7/0x2e0 mm/kasan/generic.c:189
memcpy+0x3c/0x60 mm/kasan/shadow.c:66
udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253
udf_lookup+0xef/0x340 fs/udf/namei.c:309
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_creat fs/open.c:1402 [inline]
__se_sys_creat fs/open.c:1396 [inline]
__x64_sys_creat+0x11f/0x160 fs/open.c:1396
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ffab0d164d9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe1a7e6bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffab0d164d9
RDX: 00007ffab0d164d9 RSI: 0000000000000000 RDI: 0000000020000180
RBP: 00007ffab0cd5a10 R08: 0000000000000000 R09: 0000000000000000
R10: 00005555573552c0 R11: 0000000000000246 R12: 00007ffab0cd5aa0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 3610:
kasan_save_stack mm/kasan/common.c:45 [inline]
kasan_set_track+0x3d/0x60 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:371 [inline]
__kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380
kmalloc include/linux/slab.h:576 [inline]
udf_find_entry+0x7b6/0x14f0 fs/udf/namei.c:243
udf_lookup+0xef/0x340 fs/udf/namei.c:309
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_creat fs/open.c:1402 [inline]
__se_sys_creat fs/open.c:1396 [inline]
__x64_sys_creat+0x11f/0x160 fs/open.c:1396
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff8880123ff800
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 150 bytes inside of
256-byte region [ffff8880123ff800, ffff8880123ff900)
The buggy address belongs to the physical page:
page:ffffea000048ff80 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x123fe
head:ffffea000048ff80 order:1 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 ffffea00004b8500 dead000000000003 ffff888012041b40
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0(),
pid 1, tgid 1 (swapper/0), ts 1841222404, free_ts 0
create_dummy_stack mm/page_owner.c:67 [inline]
register_early_stack+0x77/0xd0 mm/page_owner.c:83
init_page_owner+0x3a/0x731 mm/page_owner.c:93
kernel_init_freeable+0x41c/0x5d5 init/main.c:1629
kernel_init+0x19/0x2b0 init/main.c:1519
page_owner free stack trace missing
Memory state around the buggy address:
ffff8880123ff780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880123ff800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880123ff880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06
^
ffff8880123ff900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880123ff980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fix this by changing the memory size allocated for copy_name from
UDF_NAME_LEN(254) to UDF_NAME_LEN_CS0(255), because the total length
(lfi) of subsequent memcpy can be up to 255.
CC: stable@vger.kernel.org
Reported-by: syzbot+69c9fdccc6dd08961d34@syzkaller.appspotmail.com
Fixes: 066b9cded0 ("udf: Use separate buffer for copying split names")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221109013542.442790-1-zhangpeng362@huawei.com
Add the same change for ARM64 as done in the commit 9440c42941
("x86/syscall: Include asm/ptrace.h in syscall_wrapper header") to
make sure all syscalls see 'struct pt_regs' definition and resulted
BTF for '__arm64_sys_*(struct pt_regs *regs)' functions point to
actual struct.
Without this patch, the BPF verifier refuses to load a tracing prog
which accesses pt_regs.
bpf(BPF_PROG_LOAD, {prog_type=0x1a, ...}, 128) = -1 EACCES
With this patch, we can see the correct error, which saves us time
in debugging the prog.
bpf(BPF_PROG_LOAD, {prog_type=0x1a, ...}, 128) = 4
bpf(BPF_RAW_TRACEPOINT_OPEN, {raw_tracepoint={name=NULL, prog_fd=4}}, 128) = -1 ENOTSUPP
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221031215728.50389-1-kuniyu@amazon.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
CONFIG_UBSAN_SHIFT with gcc-5 complains that the shifting of
ARM_CPU_IMP_AMPERE (0xC0) into bits [31:24] by MIDR_CPU_MODEL() is
undefined behavior. Well, sort of, it actually spells the error as:
arch/arm64/kernel/proton-pack.c: In function 'spectre_bhb_loop_affected':
arch/arm64/include/asm/cputype.h:44:2: error: initializer element is not constant
(((imp) << MIDR_IMPLEMENTOR_SHIFT) | \
^
This isn't an issue for other Implementor codes, as all the other codes
have zero in the top bit and so are representable as a signed int.
Cast the implementor code to unsigned in MIDR_CPU_MODEL to remove the
undefined behavior.
Fixes: 0e5d5ae837 ("arm64: Add AMPERE1 to the Spectre-BHB affected list")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20221102160106.1096948-1-scott@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Address a few problems with the initial test script version:
* On systems with ip6tables but no ip6tables-legacy, testing for
ip6tables was disabled by accident.
* Firewall setup phase did not respect possibly unavailable tools.
* Consistently call nft via '$nft'.
Fixes: 6e31ce831c ("selftests: netfilter: Test reverse path filtering")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Accuphase DAC-60 option card supports native DSD up to DSD256,
but doesn't have support for auto-detection. Explicitly enable
DSD support for the correct altsetting.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221108221241.1220878-1-jussi@sonarnerd.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Previously, the default number of transmit queues was 16. Due to
resource concerns, set to 8 queues instead. Still allow the user
to set more queues (max 16) if they like.
Since the driver is virtualized away from the physical NIC, the purpose
of multiple queues is purely to allow for parallel calls to the
hypervisor. Therefore, there is no noticeable effect on performance by
reducing queue count to 8.
Fixes: d926793c1d ("ibmveth: Implement multi queue on xmit")
Reported-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221107203215.58206-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When failed to enable interrupts in nixge_open() for opening device,
napi isn't disabled. When open nixge device next time, it will reports
a invalid opcode issue. Fix it. Only be compiled, not be tested.
Fixes: 492caffa8a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107101443.120205-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When prestera_sdma_switch_init() failed, the memory pointed to by
sw->rxtx isn't released. Fix it. Only be compiled, not be tested.
Fixes: 501ef3066c ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20221108025607.338450-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a blank line to make the sentence before the list render as a separate
paragraph, not a definition.
Link: https://lkml.kernel.org/r/20221107142255.4038811-1-glider@google.com
Fixes: 93858ae70c ("kmsan: add ReST documentation")
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A user could write a name of a file under 'damon/' debugfs directory,
which is not a user-created context, to 'rm_contexts' file. In the case,
'dbgfs_rm_context()' just assumes it's the valid DAMON context directory
only if a file of the name exist. As a result, invalid memory access
could happen as below. Fix the bug by checking if the given input is for
a directory. This check can filter out non-context inputs because
directories under 'damon/' debugfs directory can be created via only
'mk_contexts' file.
This bug has found by syzbot[1].
[1] https://lore.kernel.org/damon/000000000000ede3ac05ec4abf8e@google.com/
Link: https://lkml.kernel.org/r/20221107165001.5717-2-sj@kernel.org
Fixes: 75c1c2b53c ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: syzbot+6087eafb76a94c4ac9eb@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> [5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
