Commit Graph

983 Commits

Author SHA1 Message Date
Rafael J. Wysocki
0d64482bf2 Merge branch 'pm-tools'
Merge power management tools updates for 5.19-rc1:

 - Update turbostat to version 2022.04.16 including the following
   changes:

   * No build warnings with -Wextra (Len Brown).
   * Tweak --show and --hide capability (Len Brown).
   * Be more useful as non-root (Len Brown).
   * Fix ICX DRAM power numbers (Len Brown).
   * Fix dump for AMD cpus (Dan Merillat).
   * Add Power Limit4 support (Sumeet Pawnikar).
   * Print power values upto three decimal (Sumeet Pawnikar).
   * Allow -e for all names (Zephaniah E. Loss-Cutler-Hull).
   * Allow printing header every N iterations (Zephaniah E.
     Loss-Cutler-Hull).
   * Support thermal throttle count print (Chen Yu).

* pm-tools:
  tools/power turbostat: version 2022.04.16
  tools/power turbostat: No build warnings with -Wextra
  tools/power turbostat: be more useful as non-root
  tools/power turbostat: fix ICX DRAM power numbers
  tools/power turbostat: Support thermal throttle count print
  tools/power turbostat: Allow printing header every N iterations
  tools/power turbostat: Allow -e for all names.
  tools/power turbostat: print power values upto three decimal
  tools/power turbostat: Add Power Limit4 support
  tools/power turbostat: fix dump for AMD cpus
  tools/power turbostat: tweak --show and --hide capability
2022-05-23 19:59:06 +02:00
Rafael J. Wysocki
ec1ff61ee2 Merge branch 'acpica'
Merge ACPICA material for 5.19-rc1:

 - Add support for the Windows 11 _OSI string (Mario Limonciello)

 - Add the CFMWS subtable to the CEDT table (Lawrence Hileman).

 - iASL: NHLT: Treat Terminator as specific_config (Piotr Maziarz).

 - iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint
   Descriptor (Piotr Maziarz).

 - iASL: NHLT: Rename linux specific strucures to device_info (Piotr
   Maziarz).

 - Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob Moore).

 - Clean up double word in comment (Tom Rix).

 - Update copyright notices to the year 2022 (Bob Moore).

 - Remove some tabs and // comments - automated cleanup (Bob Moore).

 - Replace zero-length array with flexible-array member (Gustavo A. R.
   Silva).

 - Interpreter: Add units to time variable names (Paul Menzel).

 - Add support for ARM Performance Monitoring Unit Table (Besar
   Wicaksono).

 - Inform users about ACPI spec violation related to sleep length (Paul
   Menzel).

 - iASL/MADT: Add OEM-defined subtable (Bob Moore).

 - Interpreter: Fix some typo mistakes (Selvarasu Ganesan).

 - Updates for revision E.d of IORT (Shameer Kolothum).

 - Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).

 - Update version to 20220331 (Bob Moore).

* acpica: (21 commits)
  Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"
  ACPICA: Update version to 20220331
  ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output
  ACPICA: IORT: Updates for revision E.d
  ACPICA: executer/exsystem: Fix some typo mistakes
  ACPICA: iASL/MADT: Add OEM-defined subtable
  ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms
  ACPICA: executer/exsystem: Inform users about ACPI spec violation
  ACPICA: Add support for ARM Performance Monitoring Unit Table.
  ACPICA: executer/exsystem: Add units to time variable names
  ACPICA: Headers: Replace zero-length array with flexible-array member
  ACPICA: Removed some tabs and // comments
  ACPICA: Update copyright notices to the year 2022
  ACPICA: Clean up double word in comment
  ACPICA: Add new ACPI 6.4 semantics for LoadTable() operator
  ACPICA: Add new ACPI 6.4 semantics to the Load() operator
  ACPICA: iASL: NHLT: Rename linux specific strucures to device_info
  ACPICA: iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint Descriptor
  ACPICA: iASL: NHLT: Treat Terminator as specific_config
  ACPICA: Add the subtable CFMWS to the CEDT table
  ...
2022-05-23 18:16:42 +02:00
Srinivas Pandruvada
9230a2ac2b tools/power/x86/intel-speed-select: Fix warning for perf_cap.cpu
Initialize perf_cap struct to avoid warning:

  CC      hfi-events.o
In function ‘process_hfi_event’,
    inlined from ‘handle_event’ at hfi-events.c:220:5:
hfi-events.c:184:9: warning: ‘perf_cap.cpu’ may be used
uninitialized [-Wmaybe-uninitialized]
  184 |         process_level_change(perf_cap->cpu);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hfi-events.c: In function ‘handle_event’:
hfi-events.c:193:25: note: ‘perf_cap.cpu’ was declared here
  193 |         struct perf_cap perf_cap;
      |                         ^~~~~~~~

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220511171208.211319-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-05-12 15:37:53 +02:00
Srinivas Pandruvada
2da6391dfc tools/power/x86/intel-speed-select: Display error on turbo mode disabled
For Intel SST turbo-freq feature to be enabled, the turbo mode on the
platform must be enabled also. If turbo mode is disabled, display error
while enabling turbo-freq feature.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220510023421.3930540-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-05-12 15:35:30 +02:00
Rafael J. Wysocki
9765fa2566 Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat changes for 5.19 from Len Brown:

"Chen Yu (1):
      tools/power turbostat: Support thermal throttle count print

Dan Merillat (1):
      tools/power turbostat: fix dump for AMD cpus

Len Brown (5):
      tools/power turbostat: tweak --show and --hide capability
      tools/power turbostat: fix ICX DRAM power numbers
      tools/power turbostat: be more useful as non-root
      tools/power turbostat: No build warnings with -Wextra
      tools/power turbostat: version 2022.04.16

Sumeet Pawnikar (2):
      tools/power turbostat: Add Power Limit4 support
      tools/power turbostat: print power values upto three decimal

Zephaniah E. Loss-Cutler-Hull (2):
      tools/power turbostat: Allow -e for all names.
      tools/power turbostat: Allow printing header every N iterations"

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: version 2022.04.16
  tools/power turbostat: No build warnings with -Wextra
  tools/power turbostat: be more useful as non-root
  tools/power turbostat: fix ICX DRAM power numbers
  tools/power turbostat: Support thermal throttle count print
  tools/power turbostat: Allow printing header every N iterations
  tools/power turbostat: Allow -e for all names.
  tools/power turbostat: print power values upto three decimal
  tools/power turbostat: Add Power Limit4 support
  tools/power turbostat: fix dump for AMD cpus
  tools/power turbostat: tweak --show and --hide capability
2022-04-19 17:43:25 +02:00
Len Brown
58990892ca tools/power turbostat: version 2022.04.16
Signed-off-by: Len Brown <len.brown@intel.com>
2022-04-17 00:05:25 -04:00
Len Brown
9878bf7a9f tools/power turbostat: No build warnings with -Wextra
Signed-off-by: Len Brown <len.brown@intel.com>
2022-04-16 23:45:18 -04:00
Len Brown
164d7a965b tools/power turbostat: be more useful as non-root
Don't exit if used this way:

sudo setcap cap_sys_nice,cap_sys_rawio=+ep ./turbostat
sudo chmod +r /dev/cpu/*/msr
./turbostat

note: cap_sys_admin is now also needed for the perf IPC counter:
sudo setcap cap_sys_admin,cap_sys_nice,cap_sys_rawio=+ep ./turbostat

Reported-by: Artem S. Tashkinov <aros@gmx.com>
Reported-by: Toby Broom <tbroom@outlook.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2022-04-16 23:07:05 -04:00
Len Brown
6397b64189 tools/power turbostat: fix ICX DRAM power numbers
ICX (and its duplicates) require special hard-coded DRAM RAPL units,
rather than using the generic RAPL energy units.

Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2022-04-16 21:58:15 -04:00
Chen Yu
eae97e053f tools/power turbostat: Support thermal throttle count print
The turbostat data is collected by end user for power evaluationit. However
it looks like we are missing enough thermal context there. Already a couple of
time we found that power management developer asking something like this:
grep -r . /sys/devices/system/cpu/cpu*/thermal_throttle/*

Print the per core thermal throttle count so as to get suffificent thermal
context.

turbostat -i 5 -s Core,CPU,CoreThr
Core	CPU	CoreThr
-	-	104
0	0	61
0	4
1	1	0
1	5
2	2	104
2	6
3	3	7
3	7

Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2022-04-16 21:58:15 -04:00
Zephaniah E. Loss-Cutler-Hull
c7e399f839 tools/power turbostat: Allow printing header every N iterations
This gives the ability to reprint the header every N iterations, so you
can ensure that a scrolling display always has the header visible
somewhere on the screen.

Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2022-04-16 21:58:15 -04:00
Zephaniah E. Loss-Cutler-Hull
0fc521bc33 tools/power turbostat: Allow -e for all names.
Currently, there are a number of variables which are displayed by
default, enabled with -e all, and listed by --list, but which you can
not give to --enable/-e.

So you can enable CPU0c1 (in the bic array), but you can't enable C1 or
C1% (not in the bic array, but exists in sysfs).

This runs counter to both the documentation and user expectations, and
it's just not very user friendly.

As such, the mechanism used by --hide has been duplicated, and is now
also used by --enable, so we can handle unknown names gracefully.

Note: One impact of this is that truly unknown fields given to --enable
will no longer generate errors, they will be silently ignored, as --hide
does.

Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2022-04-16 21:58:15 -04:00
Sumeet Pawnikar
6b398625ae tools/power turbostat: print power values upto three decimal
Print power values upto three decimal places in watts.

Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2022-04-16 21:58:15 -04:00
Sumeet Pawnikar
f52ba93190 tools/power turbostat: Add Power Limit4 support
Add Power Limit4 support.

Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2022-04-16 21:58:14 -04:00
Dan Merillat
6799ba84ca tools/power turbostat: fix dump for AMD cpus
turbostat --Dump exits early with status 243 (-13)

get_counters() calls get_msr_sum() on zen CPUS
for MSR_PKG_ENERGY_STAT, but per_cpu_msr_sum
has not been initialized.

Signed-off-by: Dan Merillat <git@dan.eginity.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2022-04-16 21:58:14 -04:00
Len Brown
5dc241f2b2 tools/power turbostat: tweak --show and --hide capability
allow invocations such as # turbostat --show power,Busy%

previously the "Busy%" was ignored

Signed-off-by: Len Brown <len.brown@intel.com>
2022-04-16 21:17:18 -04:00
Bob Moore
487ea80a28 ACPICA: Update copyright notices to the year 2022
ACPICA commit 738d7b0726e6c0458ef93c0a01c0377490888d1e

Affects all source modules and utility signons.

Link: https://github.com/acpica/acpica/commit/738d7b07
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13 20:24:57 +02:00
Herton R. Krzesinski
b2dd71f9f7 tools/power/x86/intel-speed-select: fix build failure when using -Wl,--as-needed
Build of intel-speed-select will fail if you run:

$ LDFLAGS="-Wl,--as-needed" /usr/bin/make V=1
...
gcc -O2 -Wall -g -D_GNU_SOURCE -Iinclude -I/usr/include/libnl3 -Wl,--as-needed -lnl-genl-3 -lnl-3 intel-speed-select-in.o -o intel-speed-select
/usr/bin/ld: intel-speed-select-in.o: in function `handle_event':
(...)/linux/tools/power/x86/intel-speed-select/hfi-events.c:189: undefined reference to `nlmsg_hdr'
...

In this case the problem is that order when linking matters when using
the flag -Wl,--as-needed, symbols not used at that point are discarded.
So since intel-speed-select-in.o comes after, at that point the
libraries/symbols are already discarded and then missing/undefined
references are reported.

To fix this, make sure we specify LDFLAGS after the object file.

Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Link: https://lore.kernel.org/r/20220404210525.725611-1-herton@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-13 13:49:48 +02:00
Linus Torvalds
b8321ed4a4 Kbuild updates for v5.18
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
    additional flags to be passed to user-space programs.
 
  - Fix missing fflush() bugs in Kconfig and fixdep
 
  - Fix a minor bug in the comment format of the .config file
 
  - Make kallsyms ignore llvm's local labels, .L*
 
  - Fix UAPI compile-test for cross-compiling with Clang
 
  - Extend the LLVM= syntax to support LLVM=<suffix> form for using a
    particular version of LLVm, and LLVM=<prefix> form for using custom
    LLVM in a particular directory path.
 
  - Clean up Makefiles
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmJFGloVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGH0kP/j6Vx5BqEv3tP2Q+UANxLqITleJs
 IFpbSesz/BhlG7I/IapWmCDSqFbYd5uJTO4ko8CsPmZHcxr6Gw3y+DN5yQACKaG/
 p9xiF6GjPyKR8+VdcT2tV50+dVY8ANe/DxCyzKrJd/uyYxgARPKJh0KRMNz+d9lj
 ixUpCXDhx/XlKzPIlcxrvhhjevKz+NnHmN0fe6rzcOw9KzBGBTsf20Q3PqUuBOKa
 rWHsRGcBPA8eKLfWT1Us1jjic6cT2g4aMpWjF20YgUWKHgWVKcNHpxYKGXASVo/z
 ewdDnNfmwo7f7fKMCDDro9iwFWV/BumGtn43U00tnqdBcTpFojPlEOga37UPbZDF
 nmTblGVUhR0vn4PmfBy8WkAkbW+IpVatKwJGV4J3KjSvdWvZOmVj9VUGLVAR0TXW
 /YcgRs6EtG8Hn0IlCj0fvZ5wRWoDLbP2DSZ67R/44EP0GaNQPwUe4FI1izEE4EYX
 oVUAIxcKixWGj4RmdtmtMMdUcZzTpbgS9uloMUmS3u9LK0Ir/8tcWaf2zfMO6Jl2
 p4Q31s1dUUKCnFnj0xDKRyKGUkxYebrHLfuBqi0RIc0xRpSlxoXe3Dynm9aHEQoD
 ZSV0eouQJxnaxM1ck5Bu4AHLgEebHfEGjWVyUHno7jFU5EI9Wpbqpe4pCYEEDTm1
 +LJMEpdZO0dFvpF+
 =84rW
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
   additional flags to be passed to user-space programs.

 - Fix missing fflush() bugs in Kconfig and fixdep

 - Fix a minor bug in the comment format of the .config file

 - Make kallsyms ignore llvm's local labels, .L*

 - Fix UAPI compile-test for cross-compiling with Clang

 - Extend the LLVM= syntax to support LLVM=<suffix> form for using a
   particular version of LLVm, and LLVM=<prefix> form for using custom
   LLVM in a particular directory path.

 - Clean up Makefiles

* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Make $(LLVM) more flexible
  kbuild: add --target to correctly cross-compile UAPI headers with Clang
  fixdep: use fflush() and ferror() to ensure successful write to files
  arch: syscalls: simplify uapi/kapi directory creation
  usr/include: replace extra-y with always-y
  certs: simplify empty certs creation in certs/Makefile
  certs: include certs/signing_key.x509 unconditionally
  kallsyms: ignore all local labels prefixed by '.L'
  kconfig: fix missing '# end of' for empty menu
  kconfig: add fflush() before ferror() check
  kbuild: replace $(if A,A,B) with $(or A,B)
  kbuild: Add environment variables for userprogs flags
  kbuild: unify cmd_copy and cmd_shipped
2022-03-31 11:59:03 -07:00
Linus Torvalds
f648372dfe Thermal control updates for 5.18-rc1
- Add a new thermal driver for the Intel Hardware Feedback Interface
    (HFI) including the HFI initialization, HFI notification interrupt
    handling and sending CPU capabilities change messages to user
    space via the thermal netlink interface (Ricardo Neri, Srinivas
    Pandruvada, Nathan Chancellor, Randy Dunlap).
 
  - Extend the intel-speed-select utility to handle out-of-band CPU
    configuration changes and add support for the CPU capabilities
    change messages sent over the thermal netlink interface by the new
    HFI thermal driver to it (Srinivas Pandruvada).
 
  - Convert the DT bindings to yaml format for the Exynos platform
    and fix and update the MAINTAINERS file for this driver (Krzysztof
    Kozlowski).
 
  - Register the thermal zones as HWmon sensors for the QCom's
    Tsens driver and TI thermal platforms (Dmitry Baryshkov, Romain
    Naour).
 
  - Add the msm8953 compatible documentation in the bindings (Luca
    Weiss).
 
  - Add the sm8150 platform support to the QCom LMh driver's DT
    binding (Thara Gopinath).
 
  - Check the command result from the IPC command to the BPMP in the
    Tegra driver (Mikko Perttunen).
 
  - Silence the error for normal configuration where the interrupt
    is optionnal in the Broadcom thermal driver (Florian Fainelli).
 
  - Remove remaining dead code from the TI thermal driver (Yue
    Haibing).
 
  - Don't use bitmap_weight() in end_power_clamp() in the powerclamp
    driver (Yury Norov).
 
  - Update the OS policy capabilities handshake in the int340x thermal
    driver (Srinivas Pandruvada).
 
  - Increase the policies bitmap size in int340x (Srinivas Pandruvada).
 
  - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
    int340x thermal driver (Rafael Wysocki).
 
  - Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
 
  - Add Intel Dynamic Power and Thermal Framework (DPTF) kernel interface
    documentation (Srinivas Pandruvada).
 
  - Fix bullet list warning in the thermal documentation (Randy Dunlap).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmI4pU8SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx47oP+gJMvi3IT/yaN4wyxoT6OeM8A8qPNQIw
 A6olZeL5/t1tp3jPU5qJ498q9W6vokovdqklAya4eqChmPboVk11A3TJ+dhflIRU
 NxaXIKTueNh5AwD08O9jhJJCJEejsb2i7lzWkJKMM/S3eZCciZU9ac4C5WVi3DqM
 F7WL62vhzsknsuTtCw9KLufmI3+NUFW98nS/B2EmesZs1WLfEnrEajYTvzgJRXQH
 qiO6x6fK4HJWP8D7XYxNwGpRObfRFOIkZYt40iXsV8s1fsdcEcKUnXpCviOg3tQ8
 mLE+xqnpAKxaGmrI8QZr6863/NyG5dN8A3hk6ZbTN7vWnyVLmRIzs8XZ8hoPycmH
 LeEGn/LV1td1qrJykRemCYzJCfmXF2k0b6MjJGxgUQ7UItlBXr2pVRWXCFlY+Ekh
 9ahZ7/2BSwdaW5DHbseZIIvF/rsCq0/i4+xV2JizM7ufnlFRx+6jP68KLDQxjwgp
 ZparKMYI/8zEgMq3x3tlvh5JsK4M0kA95NC+bsov4gNh0jbrm+CL92g5PuDLXAby
 RlW8Fmvx1px1n6IEoeLAtbTdQVJwqyNWUyVIhrXkJVGBkCcupCAfuMY9s6woKemf
 IXr1n/tjKG3hxuh/NTgAKYvIKaWSNF1ZIdNGbvgpzEGL+p26y96qhJYFlNBthXy9
 v/4V8qFn0w6R
 =6PYL
 -----END PGP SIGNATURE-----

Merge tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
 "As far as new functionality is concerned, there is a new thermal
  driver for the Intel Hardware Feedback Interface (HFI) along with some
  intel-speed-select utility changes to support it. There are also new
  DT compatible strings for a couple of platforms, and thermal zones on
  some platforms will be registered as HWmon sensors now.

  Apart from the above, some drivers are updated (fixes mostly) and
  there is a new piece of documentation for the Intel DPTF (Dynamic
  Power and Thermal Framework) sysfs interface.

  Specifics:

   - Add a new thermal driver for the Intel Hardware Feedback Interface
     (HFI) including the HFI initialization, HFI notification interrupt
     handling and sending CPU capabilities change messages to user space
     via the thermal netlink interface (Ricardo Neri, Srinivas
     Pandruvada, Nathan Chancellor, Randy Dunlap).

   - Extend the intel-speed-select utility to handle out-of-band CPU
     configuration changes and add support for the CPU capabilities
     change messages sent over the thermal netlink interface by the new
     HFI thermal driver to it (Srinivas Pandruvada).

   - Convert the DT bindings to yaml format for the Exynos platform and
     fix and update the MAINTAINERS file for this driver (Krzysztof
     Kozlowski).

   - Register the thermal zones as HWmon sensors for the QCom's Tsens
     driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour).

   - Add the msm8953 compatible documentation in the bindings (Luca
     Weiss).

   - Add the sm8150 platform support to the QCom LMh driver's DT binding
     (Thara Gopinath).

   - Check the command result from the IPC command to the BPMP in the
     Tegra driver (Mikko Perttunen).

   - Silence the error for normal configuration where the interrupt is
     optionnal in the Broadcom thermal driver (Florian Fainelli).

   - Remove remaining dead code from the TI thermal driver (Yue
     Haibing).

   - Don't use bitmap_weight() in end_power_clamp() in the powerclamp
     driver (Yury Norov).

   - Update the OS policy capabilities handshake in the int340x thermal
     driver (Srinivas Pandruvada).

   - Increase the policies bitmap size in int340x (Srinivas Pandruvada).

   - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
     int340x thermal driver (Rafael Wysocki).

   - Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).

   - Add Intel Dynamic Power and Thermal Framework (DPTF) kernel
     interface documentation (Srinivas Pandruvada).

   - Fix bullet list warning in the thermal documentation (Randy
     Dunlap)"

* tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
  thermal: int340x: Update OS policy capability handshake
  thermal: int340x: Increase bitmap size
  Documentation: thermal: DPTF Documentation
  MAINTAINERS: thermal: samsung: update Krzysztof Kozlowski's email
  thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()
  thermal/drivers/brcmstb_thermal: Interrupt is optional
  thermal: tegra-bpmp: Handle errors in BPMP response
  drivers/thermal/ti-soc-thermal: Add hwmon support
  dt-bindings: thermal: tsens: Add msm8953 compatible
  dt-bindings: thermal: Add sm8150 compatible string for LMh
  thermal/drivers/qcom/lmh: Add support for sm8150
  thermal/drivers/tsens: register thermal zones as hwmon sensors
  MAINTAINERS: thermal: samsung: Drop obsolete properties
  dt-bindings: thermal: samsung: Convert to dtschema
  tools/power/x86/intel-speed-select: v1.12 release
  tools/power/x86/intel-speed-select: HFI support
  tools/power/x86/intel-speed-select: OOB daemon mode
  thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
  thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
  thermal: Replace acpi_bus_get_device()
  ...
2022-03-21 14:35:11 -07:00
Jinzhou Su
5e32adccea tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
Intel P-state tracer is a useful tool to tune and debug Intel P-state
driver. AMD P-state tracer import intel pstate tracer. This tool can
be used to analyze the performance of AMD P-state tracer.

Now CPU frequency, load and desired perf can be traced.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-09 19:53:01 +01:00
Jinzhou Su
ab3ff9f1d7 tools/power/x86/intel_pstate_tracer: make tracer as a module
Make intel_pstate_tracer as a module. Other trace event can import
this module to analyze their trace data.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Acked-by: Doug Smythies <dsmythies@telus.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-09 19:53:01 +01:00
Artem Bityutskiy
a1b6f487cb turbostat: fix PC6 displaying on some systems
'MSR_PKG_CST_CONFIG_CONTROL' encodes the deepest allowed package C-state limit,
and turbostat decodes it.

Before this patch: turbostat does not recognize value "3" on Ice Lake Xeon
(ICX) and Sapphire Rapids Xeon (SPR), treats it as "unknown", and does not
display any package C-states in the results table.

After this patch: turbostat recognizes value 3 on ICX and SPR, treats it as
"PC6", and correctly displays package C-states in the results table.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-08 14:27:25 +01:00
Huang Rui
8382dce5e4 cpupower: Add "perf" option to print AMD P-State information
Add "-c --perf" option in cpupower-frequency-info to get the performance
and frequency values for AMD P-State.

Commit message amended:
Shuah Khan <skhan@linuxfoundation.org>

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-23 17:46:21 -07:00
Huang Rui
d8363e2917 cpupower: Add function to print AMD P-State performance capabilities
AMD P-State kernel module is using the fine grain frequency instead of
acpi hardware pstate. So add a function to print performance and
frequency values.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:37:12 -07:00
Huang Rui
35fdf42d90 cpupower: Move print_speed function into misc helper
The print_speed can be as a common function, and expose it into misc
helper header. Then it can be used on other helper files as well.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:37:07 -07:00
Huang Rui
bf9801baa8 cpupower: Enable boost state support for AMD P-State module
The legacy ACPI hardware P-States function has 3 P-States on ACPI table,
the CPU frequency only can be switched between the 3 P-States. While the
processor supports the boost state, it will have another boost state
that the frequency can be higher than P0 state, and the state can be
decoded by the function of decode_pstates() and read by
amd_pci_get_num_boost_states().

However, the new AMD P-State function is different than legacy ACPI
hardware P-State on AMD processors. That has a finer grain frequency
range between the highest and lowest frequency. And boost frequency is
actually the frequency which is mapped on highest performance ratio. The
similar previous P0 frequency is mapped on nominal performance ratio.
If the highest performance on the processor is higher than nominal
performance, then we think the current processor supports the boost
state. And it uses amd_pstate_boost_init() to initialize boost for AMD
P-State function.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:37:01 -07:00
Huang Rui
33e43f3636 cpupower: Add AMD P-State sysfs definition and access helper
Introduce the marco definitions and access helper function for
AMD P-State sysfs interfaces such as each performance goals and frequency
levels in amd helper file. They will be used to read the sysfs attribute
from AMD P-State cpufreq driver for cpupower utilities.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:55 -07:00
Huang Rui
4a06806e5d cpupower: Introduce ACPI CPPC library
Kernel ACPI subsytem introduced the sysfs attributes for acpi cppc
library in below path:

/sys/devices/system/cpu/cpuX/acpi_cppc/

And these attributes will be used for AMD P-State driver to provide some
performance and frequency values.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:50 -07:00
Huang Rui
e3ede97657 cpupower: Add the function to get the sysfs value from specific table
Expose the helper into cpufreq header, then cpufreq driver can use this
function to get the sysfs value if it has any specific sysfs interfaces.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:44 -07:00
Huang Rui
083792f368 cpupower: Initial AMD P-State capability
If kernel starts the AMD P-State module, the cpupower will initial the
capability flag as CPUPOWER_CAP_AMD_PSTATE. And once AMD P-State
capability is set, it won't need to set legacy ACPI relative
capabilities anymore.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:39 -07:00
Huang Rui
46c273a095 cpupower: Add the function to check AMD P-State enabled
The processor with AMD P-State function also supports legacy ACPI
hardware P-States feature as well. Once driver sets AMD P-State eanbled,
the processor will respond the finer grain AMD P-State feature instead of
legacy ACPI P-States. So it introduces the cpupower_amd_pstate_enabled()
to check whether the current kernel enables AMD P-State or AMD CPUFreq
module.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:32 -07:00
Huang Rui
c8be60c120 cpupower: Add AMD P-State capability flag
Add AMD P-State capability flag in cpupower to indicate AMD new P-State
kernel module support on Ryzen processors.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:16 -07:00
Srinivas Pandruvada
f3874e96fa tools/power/x86/intel-speed-select: v1.12 release
This version allows out of band SST support, where some remote agent
changes SST profiles via some Board Management Controller.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2022-02-17 10:57:38 -08:00
Srinivas Pandruvada
7d440da009 tools/power/x86/intel-speed-select: HFI support
Read HFI (Hardware Feedback Interface) events to process config level
changes in oob mode. When HFI is supported there is no need for polling
to check config level change.

Subscribe to Linux thermal netlink messages and process message:
THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE.
This message contains cpu number, performance and energy efficiency.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2022-02-17 10:57:31 -08:00
Srinivas Pandruvada
7fd786dfbd tools/power/x86/intel-speed-select: OOB daemon mode
It is possible that some out of band agent changed config level. In this
case CPUs need to be online/offline to support this config change. Add
a command line option --oob, so that this tool can run as daemon and poll
for config level change and take action. The poll interval is configurable
in seconds using config option --poll-interval.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2022-02-17 10:57:25 -08:00
Masahiro Yamada
5c8166419a kbuild: replace $(if A,A,B) with $(or A,B)
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.

Covert as follows:

  $(if A,A,B)  -->  $(or A,B)

This patch also converts:

  $(if A, A, B) --> $(or A, B)

Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".

Anyway, preceding spaces are not significant in the code hunks I touched.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-02-15 12:25:56 +09:00
ozkanonur
101025ff8e tools/power/cpupower/{ToDo => TODO}: Rename the todo file
Renamed the to-do file to 'TODO' instead of 'ToDo' to
comply with the naming standard.

Signed-off-by: ozkanonur <onurozkan.dev@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-01-24 09:07:11 -07:00
Andreas Rammhold
9d7c485065 tools: cpupower: fix typo in cpupower-idle-set(1) manpage
The tools name was wrong in the SYNTAX section of the manpage it should
read "idle-set" instead of "idle-info".

Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-01-24 09:07:11 -07:00
Linus Torvalds
6a8d7fbf1c More ACPI updates for 5.17-rc1
- Add support for the the Platform Firmware Runtime Update and
    Telemetry (PFRUT) interface based on ACPI to allow certain pieces
    of the platform firmware to be updated without restarting the
    system and to provide a mechanism for collecting platform firmware
    telemetry data (Chen Yu, Dan Carpenter, Yang Yingliang).
 
  - Ignore E820 reservations covering PCI host bridge windows on
    sufficiently recent x86 systems to avoid issues with allocating
    PCI BARs on systems where the E820 reservations cover the entire
    PCI host bridge memory window returned by the _CRS object in the
    system's ACPI tables (Hans de Goede).
 
  - Fix and clean up acpi_scan_init() (Rafael Wysocki).
 
  - Add more sanity checking to ACPI SPCR tables parsing (Mark
    Langsdorf).
 
  - Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang).
 
  - Drop unnecessary "static" from the ACPI PCC address space handling
    driver added recently (kernel test robot).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmHlrTwSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxQ00QAI3CYIyM+TtgxOkun/DQdHEtLOXxVsQG
 V9p9zNa0xFjQY2fE3wwa4r03fg/AfM+qqOdgZDg2QnUlHVx+ZqzNlxMVnYz2QK3P
 lhZUJ2sX0ziAYC5AJFP44mcU4yAFgqGgUgv6VUGdoG2khngKA5ds1qYPqdNMigGr
 lfAoro2tVpKL66czvglBM6Af0RIrZvmh5dpwtja1tfquAy2qLOLfwBIafdFjrTS8
 nVckdBNTgd12BxMaTlEIr8ZKX9Qe/YI0s+avzLc/lMI8gBlG0ZkGczDHxjLE48iE
 ZHwttNJm6PKR6Sj5AwXjswkW0n0aqVz1BbeDgdeL9zB6WbH9+EQaQFqYIc1pNyGG
 f67c8YwGFPMGx3BKdTksFESKb6DZifc1zbye3OKLxQquaWmufmhmQDVuXZzcfRO3
 dkhIngX/sieEWwj1P1WdaDO4vC2zG2devJhxu3WGV8HCAHsZUoBduUwk+YZUVyp3
 y+imobCCGEKZnHxtqJg7+VnQnH8ZTHFgOyqGa0boI5M8Dkae+qCcPCRDxHNa7L+7
 Hb1eCH5RbB4MKQj/dmf01vpy/Q3gZOMHOoOHyMWp+IveculjcCxOIVZN0YQizj+3
 Nw+1dcJLM6iR21f63zOQkoOhoFchp88IDc1PJtJnZOvI49Q9YB/2HKQdBGn292ZL
 +e3TWGpsfaZW
 =I4UB
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "The most significant item here is the Platform Firmware Runtime Update
  and Telemetry (PFRUT) support designed to allow certain pieces of the
  platform firmware to be updated on the fly, among other things.

  Also important is the e820 handling change on x86 that should work
  around PCI BAR allocation issues on some systems shipping since 2019.

  The rest is just a handful of assorted fixes and cleanups on top of
  the ACPI material merged previously.

  Specifics:

   - Add support for the the Platform Firmware Runtime Update and
     Telemetry (PFRUT) interface based on ACPI to allow certain pieces
     of the platform firmware to be updated without restarting the
     system and to provide a mechanism for collecting platform firmware
     telemetry data (Chen Yu, Dan Carpenter, Yang Yingliang).

   - Ignore E820 reservations covering PCI host bridge windows on
     sufficiently recent x86 systems to avoid issues with allocating PCI
     BARs on systems where the E820 reservations cover the entire PCI
     host bridge memory window returned by the _CRS object in the
     system's ACPI tables (Hans de Goede).

   - Fix and clean up acpi_scan_init() (Rafael Wysocki).

   - Add more sanity checking to ACPI SPCR tables parsing (Mark
     Langsdorf).

   - Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang).

   - Drop unnecessary "static" from the ACPI PCC address space handling
     driver added recently (kernel test robot)"

* tag 'acpi-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PCC: pcc_ctx can be static
  ACPI: scan: Rename label in acpi_scan_init()
  ACPI: scan: Simplify initialization of power and sleep buttons
  ACPI: scan: Change acpi_scan_init() return value type to void
  ACPI: SPCR: check if table->serial_port.access_width is too wide
  ACPI: APD: Check for NULL pointer after calling devm_ioremap()
  x86/PCI: Ignore E820 reservations for bridge windows on newer systems
  ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()
  ACPI: pfr_update: Fix return value check in pfru_write()
  ACPI: tools: Introduce utility for firmware updates/telemetry
  ACPI: Introduce Platform Firmware Runtime Telemetry driver
  ACPI: Introduce Platform Firmware Runtime Update device driver
  efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
2022-01-18 08:51:51 +02:00
Linus Torvalds
347708875a platform-drivers-x86 for v5.17-1
Highlights:
  - new drivers:
    - asus-tf103c-dock
    - intel_crystal_cove_charger
    - lenovo-yogabook-wmi
    - simatic-ipc platform-code + led driver + watchdog driver
    - x86-android-tablets (kernel module to workaround DSDT bugs on these)
  - amd-pmc:
    - bug-fixes
    - smar trace buffer support
  - asus-wmi: support for custom fan curves
  - int3472 (camera info ACPI object for Intel IPU3/SkyCam cameras):
    - ACPI core + int3472 changes to delay enumeration of camera sensor I2C
      clients until the PMIC for the sensor has been fully probed
    - Add support for board data (DSDT info is incomplete) for setting up
      the tps68470 PMIC used on some boards with these cameras
    - Add board data for the Microsoft Surface Go (original, v2 and v3)
  - thinkpad_acpi:
    - various cleanups
    - support for forced battery discharging (for battery calibration)
    - support to inhibit battery charging
    - this includes power_supply core changes to add new APIs for this
  - think_lmi: enhanced BIOS password support
  - various other small fixes and hardware-id additions
 
 The following is an automated git shortlog grouped by driver:
 
 ACPI:
  -  delay enumeration of devices with a _DEP pointing to an INT3472 device
 
 Add Asus TF103C dock driver:
  - Add Asus TF103C dock driver
 
 Add intel_crystal_cove_charger driver:
  - Add intel_crystal_cove_charger driver
 
 Documentation:
  -  syfs-class-firmware-attributes: Lenovo Opcode support
 
 Merge tag 'platform-drivers-x86-int3472-1' into review-hans:
  - Merge tag 'platform-drivers-x86-int3472-1' into review-hans
 
 amd-pmc:
  -  only use callbacks for suspend
  -  Add support for AMD Smart Trace Buffer
  -  Simplify error handling and store the pci_dev in amd_pmc_dev structure
  -  Fix s2idle failures on certain AMD laptops
  -  Make CONFIG_AMD_PMC depend on RTC_CLASS
 
 apple-gmux:
  -  use resource_size() with res
 
 asus-wmi:
  -  Reshuffle headers for better maintenance
  -  Split MODULE_AUTHOR() on per author basis
  -  Join string literals back
  -  remove unneeded semicolon
  -  Add support for custom fan curves
 
 dell-wmi-descriptor:
  -  disable by default
 
 hp_accel:
  -  Use SIMPLE_DEV_PM_OPS() for PM ops
  -  Fix an error handling path in 'lis3lv02d_probe()'
 
 i2c:
  -  acpi: Add i2c_acpi_new_device_by_fwnode() function
  -  acpi: Use acpi_dev_ready_for_enumeration() helper
 
 int3472:
  -  Add board data for Surface Go 3
  -  Deal with probe ordering issues
  -  Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
  -  Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
  -  Add get_sensor_adev_and_name() helper
  -  Split into 2 drivers
 
 intel-uncore-frequency:
  -  use default_groups in kobj_type
 
 intel_pmc_core:
  -  fix memleak on registration failure
 
 leds:
  -  simatic-ipc-leds: add new driver for Siemens Industial PCs
 
 lenovo-yogabook-wmi:
  -  Add support for hall sensor on the back
  -  Add driver for Lenovo Yoga Book
 
 lg-laptop:
  -  Recognize more models
 
 platform:
  -  surface: Propagate ACPI Dependency
 
 platform/mellanox:
  -  mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters
  -  mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
 
 platform/surface:
  -  aggregator_registry: Rename device registration function
  -  aggregator_registry: Use generic client removal function
  -  aggregator: Make client device removal more generic
 
 platform/x86/intel:
  -  Remove X86_PLATFORM_DRIVERS_INTEL
  -  hid: add quirk to support Surface Go 3
 
 platform_data:
  -  Add linux/platform_data/tps68470.h file
 
 pmc_atom:
  -  improve critclk_systems matching for Siemens PCs
 
 power:
  -  supply: Provide stubs for charge_behaviour helpers
  -  supply: fix charge_behaviour attribute initialization
  -  supply: add helpers for charge_behaviour sysfs
  -  supply: add charge_behaviour attributes
 
 samsung-laptop:
  -  Fix typo in a comment
 
 simatic-ipc:
  -  add main driver for Siemens devices
 
 system76_acpi:
  -  Guard System76 EC specific functionality
 
 think-lmi:
  -  Prevent underflow in index_store()
  -  Simplify tlmi_analyze() error handling a bit
  -  Move kobject_init() call into tlmi_create_auth()
  -  Opcode support
  -  Abort probe on analyze failure
 
 thinkpad_acpi:
  -  support inhibit-charge
  -  support force-discharge
  -  Add lid_logo_dot to the list of safe LEDs
  -  Add LED_RETAIN_AT_SHUTDOWN to led_class_devs
  -  Remove unused sensors_pdev_attrs_registered flag
  -  Fix the hwmon sysfs-attr showing up in the wrong place
  -  tpacpi_attr_group contains driver attributes not device attrs
  -  Register tpacpi_pdriver after subdriver init
  -  Restore missing hotkey_tablet_mode and hotkey_radio_sw sysfs-attr
  -  Fix thermal_temp_input_attr sorting
  -  Remove "goto err_exit" from hotkey_init()
  -  Properly indent code in tpacpi_dytc_profile_init()
  -  Cleanup dytc_profile_available
  -  Simplify dytc_version handling
  -  Make *_init() functions return -ENODEV instead of 1
  -  Accept ibm_init_struct.init() returning -ENODEV
  -  Convert platform driver to use dev_groups
  -  fix documentation for adaptive keyboard
  -  Fix WWAN device disabled issue after S3 deep
  -  Add support for dual fan control
 
 tools/power/x86/intel-speed-select:
  -  v1.11 release
  -  Update max frequency
 
 touchscreen_dmi:
  -  Remove the Glavey TM800A550L entry
  -  Enable pen support on the Chuwi Hi10 Plus and Pro
  -  Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet
  -  Add TrekStor SurfTab duo W1 touchscreen info
 
 watchdog:
  -  simatic-ipc-wdt: add new driver for Siemens Industrial PCs
 
 wmi:
  -  Add no_notify_data flag to struct wmi_driver
  -  Fix driver->notify() vs ->probe() race
  -  Replace read_takes_no_args with a flags field
 
 x86-android-tablets:
  -  Fix GPIO lookup leak on error-exit
  -  Add TM800A550L data
  -  Add Asus MeMO Pad 7 ME176C data
  -  Add Asus TF103C data
  -  Add support for preloading modules
  -  Add support for registering GPIO lookup tables
  -  Add support for instantiating serdevs
  -  Add support for instantiating platform-devs
  -  Add support for PMIC interrupts
  -  Don't return -EPROBE_DEFER from a non probe() function
  -  New driver for x86 Android tablets
 
 x86/platform/uv:
  -  use default_groups in kobj_type
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmHcCbkUHGhkZWdvZWRl
 QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9y3yAf/Xo8TWsnF7XoS3pNCqRcObIulHy6u
 9AOD4gTb0p9LiAd8WN75UsQDew0Rib+UDTS3s6g9l71fMzpTFOD4IaBPrVAmIxpu
 Qs9raFTH67CFid/V3DCwAjPQYxxp5LBGvYJ4oy3OmaYHieV9jdsvNLISlpi/V8wR
 PmbmYtiK5TPZwRT+mknq89D+LynP2NYkvoqRitmB7MrAvxY3c0ssrex6dXMrdgqK
 ehRtfz/ER8xQ03APIzHG+ec73LZsHCMDDG7teas4tiMlMaWGgRO2I8GAudjuPEoy
 mBTSb3ABuEud8LTMgjB+trM2w9IAoFE0L6/OrKE5dK1tPdaLxvCuuSVheQ==
 =tmPR
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

  New drivers:
   - asus-tf103c-dock
   - intel_crystal_cove_charger
   - lenovo-yogabook-wmi
   - simatic-ipc platform-code + led driver + watchdog driver
   - x86-android-tablets (kernel module to workaround DSDT bugs on
     these)

  amd-pmc:
   - bug-fixes
   - smar trace buffer support

  asus-wmi:
   - support for custom fan curves

  int3472 (camera info ACPI object for Intel IPU3/SkyCam cameras):
   - ACPI core + int3472 changes to delay enumeration of camera sensor
     I2C clients until the PMIC for the sensor has been fully probed
   - Add support for board data (DSDT info is incomplete) for setting up
     the tps68470 PMIC used on some boards with these cameras
   - Add board data for the Microsoft Surface Go (original, v2 and v3)

  thinkpad_acpi:
   - various cleanups
   - support for forced battery discharging (for battery calibration)
   - support to inhibit battery charging
   - this includes power_supply core changes to add new APIs for this

  think_lmi:
   - enhanced BIOS password support

  various other small fixes and hardware-id additions"

* tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (78 commits)
  power: supply: Provide stubs for charge_behaviour helpers
  platform/x86: x86-android-tablets: Fix GPIO lookup leak on error-exit
  platform/x86: int3472: Add board data for Surface Go 3
  platform/x86: Add Asus TF103C dock driver
  platform/x86: x86-android-tablets: Add TM800A550L data
  platform/x86: x86-android-tablets: Add Asus MeMO Pad 7 ME176C data
  platform/x86: x86-android-tablets: Add Asus TF103C data
  platform/x86: x86-android-tablets: Add support for preloading modules
  platform/x86: x86-android-tablets: Add support for registering GPIO lookup tables
  platform/x86: x86-android-tablets: Add support for instantiating serdevs
  platform/x86: x86-android-tablets: Add support for instantiating platform-devs
  platform/x86: x86-android-tablets: Add support for PMIC interrupts
  platform/x86: x86-android-tablets: Don't return -EPROBE_DEFER from a non probe() function
  platform/x86: touchscreen_dmi: Remove the Glavey TM800A550L entry
  platform/x86: touchscreen_dmi: Enable pen support on the Chuwi Hi10 Plus and Pro
  platform/x86: touchscreen_dmi: Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet
  platform/x86: Add intel_crystal_cove_charger driver
  power: supply: fix charge_behaviour attribute initialization
  platform/x86: intel-uncore-frequency: use default_groups in kobj_type
  x86/platform/uv: use default_groups in kobj_type
  ...
2022-01-11 11:26:57 -08:00
Chen Yu
53e8558837 ACPI: tools: Introduce utility for firmware updates/telemetry
Introduce a user space tool to make use of the interface exposed by
Platform Firmware Runtime Update and Telemetry drivers.

It can be used for firmware code injection, driver updates and
to retrieve platform firmware telemetry data.

Tested-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-27 17:12:58 +01:00
Srinivas Pandruvada
da78fc797f tools/power/x86/intel-speed-select: v1.11 release
This release adds following change:
- Update max performance when BIOS disabled turbo

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-12-24 12:51:50 +01:00
Srinivas Pandruvada
9734213ed4 tools/power/x86/intel-speed-select: Update max frequency
When BIOS disables turbo, the cpuinfo_max_freq will also be same as the
power up base frequency. When SST-PP causes increase in base frequency
the performance will be still limited to the old base frequency as the
cpuinfo_max_freq will not be updated.

In this case we need to update scaling_max frequency to the new
base_frequency. This will result in setting updated max performance
limit in the Pstate driver. So performance will not be limited to the
old base frequency.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-12-24 12:51:34 +01:00
Chen Yu
11f8cb8903 ACPI: tools: Fix compilation when output directory is not present
Compiling the ACPI tools when output directory parameter is specified,
but the output directory is not present, triggers the following error:

make O=/data/test/tmp/ -C tools/power/acpi/

make: Entering directory '/data/src/kernel/linux/tools/power/acpi'
  DESCEND tools/acpidbg
make[1]: Entering directory '/data/src/kernel/linux/tools/power/acpi/tools/acpidbg'
  MKDIR    include
  CP       include
  CC       tools/acpidbg/acpidbg.o
Assembler messages:
Fatal error: can't create /data/test/tmp/tools/power/acpi/tools/acpidbg/acpidbg.o: No such file or directory
make[1]: *** [../../Makefile.rules:24: /data/test/tmp/tools/power/acpi/tools/acpidbg/acpidbg.o] Error 1
make[1]: Leaving directory '/data/src/kernel/linux/tools/power/acpi/tools/acpidbg'
make: *** [Makefile:18: acpidbg] Error 2
make: Leaving directory '/data/src/kernel/linux/tools/power/acpi'

which occurs because the output directory has not been created yet.

Fix this issue by creating the output directory before compiling.

Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: New subject, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-08 15:10:27 +01:00
Srinivas Pandruvada
307722e872 tools/power/x86/intel-speed-select: v1.10 release
This release adds following change:
- Fix reporting of memory frequency

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-06-18 15:29:32 +02:00
Srinivas Pandruvada
159f130f60 tools/power/x86/intel-speed-select: Fix uncore memory frequency display
The uncore memory frequency value from the mailbox command
CONFIG_TDP_GET_MEM_FREQ needs to be scaled based on the platform for
display. There is no single constant multiplier.

This change introduces CPU model specific memory frequency multiplier.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-06-18 15:29:23 +02:00
Linus Torvalds
d8cb379cda Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
 "Bug fixes and a smattering of features"

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (21 commits)
  tools/power turbostat: version 2021.05.04
  tools/power turbostat: Support "turbostat --hide idle"
  tools/power turbostat: elevate priority of interval mode
  tools/power turbostat: formatting
  tools/power turbostat: rename tcc variables
  tools/power turbostat: add TCC Offset support
  tools/power turbostat: save original CPU model
  tools/power turbostat: Fix Core C6 residency on Atom CPUs
  tools/power turbostat: Print the C-state Pre-wake settings
  tools/power turbostat: Enable tsc_tweak for Elkhart Lake and Jasper Lake
  tools/power turbostat: unmark non-kernel-doc comment
  tools/power/turbostat: Remove Package C6 Retention on Ice Lake Server
  tools/power turbostat: Fix offset overflow issue in index converting
  tools/power/turbostat: Fix turbostat for AMD Zen CPUs
  tools/power turbostat: update version number
  tools/power turbostat: Fix DRAM Energy Unit on SKX
  Revert "tools/power turbostat: adjust for temperature offset"
  tools/power turbostat: Support Ice Lake D
  tools/power turbostat: Support Alder Lake Mobile
  tools/power turbostat: print microcode patch level
  ...
2021-05-05 12:24:29 -07:00
Len Brown
3c070b2abf tools/power turbostat: version 2021.05.04
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 20:01:09 -04:00
Len Brown
b60c573dc2 tools/power turbostat: Support "turbostat --hide idle"
As idle, in particular, can have many columns on some machines...
Make it easy to ignore them all at once.

Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 20:01:09 -04:00
Len Brown
38c6663a68 tools/power turbostat: elevate priority of interval mode
This makes interval mode less likely to see delayed
results on a heavily loaded system.

Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 20:01:09 -04:00
Len Brown
1b439f01b6 tools/power turbostat: formatting
Spring is here...
run a long overdue Lendent on turbostat.c

no functional change

Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 20:01:09 -04:00
Zhang Rui
55279aef75 tools/power turbostat: rename tcc variables
There are two TCC activation temeprature.
One is the default TCC activation temperature, also known as TJ_MAX.
Another one is the effective TCC activation temperature, which is the
subtraction of default TCC activation temperature and TCC offset.

The name of variable tcc_activation_temp might be misleading here.
Thus rename tcc_activation_temp to tj_max, and use tcc_default and
tcc_offset to calculate the effective TCC activation temperature.

No functional change in this patch.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 20:01:09 -04:00
Zhang Rui
0b9a0b9be9 tools/power turbostat: add TCC Offset support
The length of TCC Offset bits varies on different platforms.
Decode TCC Offset bits only for the platforms that we have verified.
For the others, only show default TCC activation temperature.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 20:01:08 -04:00
Zhang Rui
e9d3092f6d tools/power turbostat: save original CPU model
CPU model may get changed in intel_model_duplicates() for code reuse.
But there are still some cases we need the original CPU model to handle
minor differences between generations.

Thus save the original CPU model.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 20:01:08 -04:00
Zhang Rui
7ab5ff4937 tools/power turbostat: Fix Core C6 residency on Atom CPUs
For Atom CPUs that have core cstate deeper than C6,
MSR_CORE_C6_RESIDENCY actually returns the residency for both CC6 and
deeper Core cstates.
Thus, the real Core C6 residency should be the subtraction of
MSR_CORE_C6_RESIDENCY return value and MSR_CORE_C6_RESIDENCY return value.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 20:01:00 -04:00
Chen Yu
aeb01e6d71 tools/power turbostat: Print the C-state Pre-wake settings
C-state pre-wake setting[1] is an optimization for some Intel CPUs to
be woken up from deep C-states in order to reduce latency. According to
the spec, the BIT30 is the C-state Pre-wake Disable. Expose this setting
accordingly.
Sample output from turbostat:
...
cpu51: MSR_IA32_POWER_CTL: 0x1a00a40059 (C1E auto-promotion: DISabled)
C-state Pre-wake: ENabled
cpu51: MSR_TURBO_RATIO_LIMIT: 0x2021212121212224
...

[1] https://intel.github.io/wult/#c-state-pre-wake

Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 19:10:32 -04:00
Chen Yu
8c69da2930 tools/power turbostat: Enable tsc_tweak for Elkhart Lake and Jasper Lake
It was found that on Elkhart Lake the TSC frequency is driven by
a separate crystal-clock domain, which is different from the
BCLK domain which includes mperf. This has result in small different
speed thus inconsistence between TSC and the mperf, which caused the
Busy% to be higher than 100%. On this platform it seems that the mperf
runs faster than tsc when the CPU is 100% utilized:
delta tsc(18815473183) < delta mperf(18958403680) for 10 seconds.

To align TSC with mperf, leverage the tsc_tweak mechanism introduced for
cores newer than Skylake, so that TSC and mperf would be calculated in
the same domain.

Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 19:09:00 -04:00
Randy Dunlap
1e3ec5cdfb tools/power turbostat: unmark non-kernel-doc comment
Do not mark a comment as kernel-doc notation when it is not
meant to be in kernel-doc notation.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 18:44:32 -04:00
Chen Yu
25368d7cef tools/power/turbostat: Remove Package C6 Retention on Ice Lake Server
Currently the turbostat treats ICX the same way as SKX and shares the
code among them. But one difference is that ICX does not support Package
C6 Retention, unlike SKX and CLX.

So this patch:

1. Splitting SKX and ICX in turbostat.
2. Removing Package C6 Rentention for ICX.

And after this split, it would be easier to cutomize Ice Lake Server
in turbostat in the future.

Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 18:35:43 -04:00
Calvin Walton
13a779de41 tools/power turbostat: Fix offset overflow issue in index converting
The idx_to_offset() function returns type int (32-bit signed), but
MSR_PKG_ENERGY_STAT is u32 and would be interpreted as a negative number.
The end result is that it hits the if (offset < 0) check in update_msr_sum()
which prevents the timer callback from updating the stat in the background when
long durations are used. The similar issue exists in offset_to_idx() and
update_msr_sum(). Fix this issue by converting the 'int' to 'off_t' accordingly.

Fixes: 9972d5d84d ("tools/power turbostat: Enable accumulate RAPL display")
Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 18:33:41 -04:00
Bas Nieuwenhuizen
301b1d3a91 tools/power/turbostat: Fix turbostat for AMD Zen CPUs
It was reported that on Zen+ system turbostat started exiting,
which was tracked down to the MSR_PKG_ENERGY_STAT read failing because
offset_to_idx wasn't returning a non-negative index.

This patch combined the modification from Bingsong Si and
Bas Nieuwenhuizen and addd the MSR to the index system as alternative for
MSR_PKG_ENERGY_STATUS.

Fixes: 9972d5d84d ("tools/power turbostat: Enable accumulate RAPL display")
Reported-by: youling257 <youling257@gmail.com>
Tested-by: youling257 <youling257@gmail.com>
Tested-by: Kurt Garloff <kurt@garloff.de>
Tested-by: Bingsong Si <owen.si@ucloud.cn>
Tested-by: Artem S. Tashkinov <aros@gmx.com>
Co-developed-by: Bingsong Si <owen.si@ucloud.cn>
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 18:31:35 -04:00
Len Brown
ba58ecde5e tools/power turbostat: update version number 2021-05-04 18:23:15 -04:00
Zhang Rui
abdc75ab53 tools/power turbostat: Fix DRAM Energy Unit on SKX
SKX uses fixed DRAM Energy Unit, just like HSX and BDX.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 18:23:14 -04:00
Len Brown
b2b94be787 Revert "tools/power turbostat: adjust for temperature offset"
This reverts commit 6ff7cb371c.

Apparently the TCC offset should not be used to adjust what temperature
we show the user after all.

(on most systems, TCC offset is 0, FWIW)

Fixes: 6ff7cb371c

Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 18:23:14 -04:00
Chen Yu
6c5c656006 tools/power turbostat: Support Ice Lake D
Ice Lake D is low-end server version of Ice Lake X, reuse
the code accordingly.

Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 18:23:14 -04:00
Chen Yu
5683460b85 tools/power turbostat: Support Alder Lake Mobile
Share the code between Alder Lake Mobile and Alder Lake Desktop.

Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 18:23:14 -04:00
Len Brown
ed0757b83a tools/power turbostat: print microcode patch level
(also available via "grep microcode /proc/cpuinfo")

Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 18:23:14 -04:00
Len Brown
2af4f9b859 tools/power turbostat: add built-in-counter for IPC -- Instructions per Cycle
Use linux-perf to access the hardware instructions-retired counter.
This is necessary because the counter is not enabled by default,
and also the counter is prone to roll-over -- both of which
perf manages.

It is not necessary to use perf for the cycle counter,
because turbostat already needs to collect delta-aperf
to calcuate frequency.

Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 18:23:14 -04:00
Linus Torvalds
5469f160e6 Power management updates for 5.13-rc1
- Add idle states table for IceLake-D to the intel_idle driver and
    update IceLake-X C6 data in it (Artem Bityutskiy).
 
  - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
    drop the unused do_idle() firmware call from it (Dmitry Osipenko).
 
  - Fix cpuidle-qcom-spm Kconfig entry (He Ying).
 
  - Fix handling of possible negative tick_nohz_get_next_hrtimer()
    return values of in cpuidle governors (Rafael Wysocki).
 
  - Add support for frequency-invariance to the ACPI CPPC cpufreq
    driver and update the frequency-invariance engine (FIE) to use it
    as needed (Viresh Kumar).
 
  - Simplify the default delay_us setting in the ACPI CPPC cpufreq
    driver (Tom Saeger).
 
  - Clean up frequency-related computations in the intel_pstate
    cpufreq driver (Rafael Wysocki).
 
  - Fix TBG parent setting for load levels in the armada-37xx
    cpufreq driver and drop the CPU PM clock .set_parent method for
    armada-37xx (Marek Behún).
 
  - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
 
  - Fix handling of dev_pm_opp_of_cpumask_add_table() return values
    in cpufreq-dt to take the -EPROBE_DEFER one into acconut as
    appropriate (Quanyang Wang).
 
  - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
 
  - Drop the unused for_each_policy() macro from cpufreq (Shaokun
    Zhang).
 
  - Simplify computations in the schedutil cpufreq governor to avoid
    unnecessary overhead (Yue Hu).
 
  - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
 
  - Fix cpufreq documentation links in Kconfig (Alexander Monakov).
 
  - Fix PCI device power state handling in pci_enable_device_flags()
    to avoid issuse in some cases when the device depends on an ACPI
    power resource (Rafael Wysocki).
 
  - Add missing documentation of pm_runtime_resume_and_get() (Alan
    Stern).
 
  - Add missing static inline stub for pm_runtime_has_no_callbacks()
    to pm_runtime.h and drop the unused try_to_freeze_nowarn()
    definition (YueHaibing).
 
  - Drop duplicate struct device declaration from pm.h and fix a
    structure type declaration in intel_rapl.h (Wan Jiabing).
 
  - Use dev_set_name() instead of an open-coded equivalent of it in
    the wakeup sources code and drop a redundant local variable
    initialization from it (Andy Shevchenko, Colin Ian King).
 
  - Use crc32 instead of md5 for e820 memory map integrity check
    during resume from hibernation on x86 (Chris von Recklinghausen).
 
  - Fix typos in comments in the system-wide and hibernation support
    code (Lu Jialin).
 
  - Modify the generic power domains (genpd) code to avoid resuming
    devices in the "prepare" phase of system-wide suspend and
    hibernation (Ulf Hansson).
 
  - Add Hygon Fam18h RAPL support to the intel_rapl power capping
    driver (Pu Wen).
 
  - Add MAINTAINERS entry for the dynamic thermal power management
    (DTPM) code (Daniel Lezcano).
 
  - Add devm variants of operating performance points (OPP) API
    functions and switch over some users of the OPP framework to
    the new resource-managed API (Yangtao Li and Dmitry Osipenko).
 
  - Update devfreq core:
 
    * Register devfreq devices as cooling devices on demand (Daniel
      Lezcano).
 
    * Add missing unlock opeation in devfreq_add_device() (Lukasz
      Luba).
 
    * Use the next frequency as resume_freq instead of the previous
      frequency when using the opp-suspend property (Dong Aisheng).
 
    * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
 
    * Fix set_freq path for the userspace governor in Kconfig (Dong
      Aisheng).
 
    * Remove invalid description of get_target_freq() (Dong Aisheng).
 
  - Update devfreq drivers:
 
    * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
      of_match_ptr() (Dong Aisheng, Fabio Estevam).
 
    * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
      references to undefined symbols (Enric Balletbo i Serra, Gaël
      PORTAY).
 
    * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
      Kozlowski).
 
    * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
 
  - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
 
  - Fix typo in the pm-graph utility code (Ricardo Ribalda).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmCHAUISHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxAxMP/0tFjgxeaJ3chYaiqoPlk2QX/XdwqJvm
 8OOu2qBMWbt2bubcIlAPpdlCNaERI4itF7E8za7t9alswdq7YPWGmNR9snCXUKhD
 BzERuicZTeOcCk2P3DTgzLVc4EzF6wutA3lTdYYZIpf+LuuB+guG8zgMzScRHIsM
 N3I83O+iLTA9ifIqN0/wH//a0ISvo6rSWtcbx+48d5bYvYixW7CsBmoxWHhGiYsw
 4PJ4AzbdNJEhQp91SBYPIAmqwV88FZUPoYnRazXMxOSevMewhP9JuCHXAujC3gLV
 l5d2TBaBV4EBYLD5tfCpJvHMXhv/yBpg6KRivjri+zEnY1TAqIlfR4vYiL7puVvQ
 PdwjyvNFDNGyUSX/AAwYF6F4WCtIhw8hCahw6Dw2zcDz0plFdRZmWAiTdmIjECJK
 8EvwJNlmdl27G1y+EBc6NnwzEFZQwiu9F5bUHUkmc3fF1M1aFTza8WDNDo30TC94
 94c+uVBRL2fBePl4FfGZATfJbOMb8+vDIkroQxrIjQDT/7Ha3Mz75JZDRHItZo92
 +4fES2eFdfZISCLIQMBY5TeXox3O8qsirC1k4qELwy71gPUE9CpP3FkxKIvyZLlv
 +6fS9ttpUfyFBF7gqrEy+ziVk1Rm4oorLmWCtthz4xyerzj5+vtZQqKzcySk0GA5
 hYkseZkedR6y
 =t+SG
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add some new hardware support (for example, IceLake-D idle
  states in intel_idle), fix some issues (for example, the handling of
  negative "sleep length" values in cpuidle governors), add new
  functionality to the existing drivers (for example, scale-invariance
  support in the ACPI CPPC cpufreq driver) and clean up code all over.

  Specifics:

   - Add idle states table for IceLake-D to the intel_idle driver and
     update IceLake-X C6 data in it (Artem Bityutskiy).

   - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
     drop the unused do_idle() firmware call from it (Dmitry Osipenko).

   - Fix cpuidle-qcom-spm Kconfig entry (He Ying).

   - Fix handling of possible negative tick_nohz_get_next_hrtimer()
     return values of in cpuidle governors (Rafael Wysocki).

   - Add support for frequency-invariance to the ACPI CPPC cpufreq
     driver and update the frequency-invariance engine (FIE) to use it
     as needed (Viresh Kumar).

   - Simplify the default delay_us setting in the ACPI CPPC cpufreq
     driver (Tom Saeger).

   - Clean up frequency-related computations in the intel_pstate cpufreq
     driver (Rafael Wysocki).

   - Fix TBG parent setting for load levels in the armada-37xx cpufreq
     driver and drop the CPU PM clock .set_parent method for armada-37xx
     (Marek Behún).

   - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).

   - Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
     cpufreq-dt to take the -EPROBE_DEFER one into acconut as
     appropriate (Quanyang Wang).

   - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).

   - Drop the unused for_each_policy() macro from cpufreq (Shaokun
     Zhang).

   - Simplify computations in the schedutil cpufreq governor to avoid
     unnecessary overhead (Yue Hu).

   - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).

   - Fix cpufreq documentation links in Kconfig (Alexander Monakov).

   - Fix PCI device power state handling in pci_enable_device_flags() to
     avoid issuse in some cases when the device depends on an ACPI power
     resource (Rafael Wysocki).

   - Add missing documentation of pm_runtime_resume_and_get() (Alan
     Stern).

   - Add missing static inline stub for pm_runtime_has_no_callbacks() to
     pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
     (YueHaibing).

   - Drop duplicate struct device declaration from pm.h and fix a
     structure type declaration in intel_rapl.h (Wan Jiabing).

   - Use dev_set_name() instead of an open-coded equivalent of it in the
     wakeup sources code and drop a redundant local variable
     initialization from it (Andy Shevchenko, Colin Ian King).

   - Use crc32 instead of md5 for e820 memory map integrity check during
     resume from hibernation on x86 (Chris von Recklinghausen).

   - Fix typos in comments in the system-wide and hibernation support
     code (Lu Jialin).

   - Modify the generic power domains (genpd) code to avoid resuming
     devices in the "prepare" phase of system-wide suspend and
     hibernation (Ulf Hansson).

   - Add Hygon Fam18h RAPL support to the intel_rapl power capping
     driver (Pu Wen).

   - Add MAINTAINERS entry for the dynamic thermal power management
     (DTPM) code (Daniel Lezcano).

   - Add devm variants of operating performance points (OPP) API
     functions and switch over some users of the OPP framework to the
     new resource-managed API (Yangtao Li and Dmitry Osipenko).

   - Update devfreq core:

      * Register devfreq devices as cooling devices on demand (Daniel
        Lezcano).

      * Add missing unlock opeation in devfreq_add_device() (Lukasz
        Luba).

      * Use the next frequency as resume_freq instead of the previous
        frequency when using the opp-suspend property (Dong Aisheng).

      * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).

      * Fix set_freq path for the userspace governor in Kconfig (Dong
        Aisheng).

      * Remove invalid description of get_target_freq() (Dong Aisheng).

   - Update devfreq drivers:

      * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
        of_match_ptr() (Dong Aisheng, Fabio Estevam).

      * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
        references to undefined symbols (Enric Balletbo i Serra, Gaël
        PORTAY).

      * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
        Kozlowski).

      * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).

   - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).

   - Fix typo in the pm-graph utility code (Ricardo Ribalda)"

* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  PM: wakeup: remove redundant assignment to variable retval
  PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
  cpufreq: Kconfig: fix documentation links
  PM: wakeup: use dev_set_name() directly
  PM: runtime: Add documentation for pm_runtime_resume_and_get()
  cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
  cpufreq: armada-37xx: Fix module unloading
  cpufreq: armada-37xx: Remove cur_frequency variable
  cpufreq: armada-37xx: Fix determining base CPU frequency
  cpufreq: armada-37xx: Fix driver cleanup when registration failed
  clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
  clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
  cpufreq: armada-37xx: Fix the AVS value for load L1
  clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
  cpufreq: armada-37xx: Fix setting TBG parent for load levels
  cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
  cpuidle: tegra: Remove do_idle firmware call
  cpuidle: tegra: Fix C7 idling state on Tegra114
  PM: sleep: fix typos in comments
  cpufreq: Remove unused for_each_policy macro
  ...
2021-04-26 15:10:25 -07:00
Linus Torvalds
d8f9176b4e ACPI updates for 5.13-rc1
- Update ACPICA code in the kernel to upstream revision 20210331
    including the following changes:
 
    * Add parsing for IVRS IVHD 40h and device entry F0h (Alexander
      Monakov).
 
    * Add new CEDT table for CXL 2.0 and iASL support for it (Ben
      Widawsky, Bob Moore).
 
    * NFIT: add Location Cookie field (Bob Moore).
 
    * HMAT: add new fields/flags (Bob Moore).
 
    * Add new flags in SRAT (Bob Moore).
 
    * PMTT: add new fields/structures (Bob Moore).
 
    * Add CSI2Bus resource template (Bob Moore).
 
    * iASL: Decode subtable type field for VIOT (Bob Moore).
 
    * Fix various typos and spelling mistakes (Colin Ian King).
 
    * Add new predefined objects _BPC, _BPS, and _BPT (Erik Kaneda).
 
    * Add USB4 capabilities UUID (Erik Kaneda).
 
    * Add CXL ACPI device ID and _CBR object (Erik Kaneda).
 
    * MADT: add Multiprocessor Wakeup Structure (Erik Kaneda).
 
    * PCCT: add support for subtable type 5 (Erik Kaneda).
 
    * PPTT: add new version of subtable type 1 (Erik Kaneda).
 
    * Add SDEV secure access components (Erik Kaneda).
 
    * Add support for PHAT table (Erik Kaneda).
 
    * iASL: Add definitions for the VIOT table (Jean-Philippe Brucker).
 
    * acpisrc: Add missing conversion for VIOT support (Jean-Philippe
      Brucker).
 
    * IORT: Updates for revision E.b (Shameer Kolothum).
 
  - Rearrange message printing in ACPI-related code to avoid using the
    ACPICA's internal message printing macros outside ACPICA and do
    some related code cleanups (Rafael Wysocki).
 
  - Modify the device enumeration code to turn off all of the unused
    ACPI power resources at the end (Rafael Wysocki).
 
  - Change the ACPI power resources handling code to turn off unused
    ACPI power resources without checking their status which should
    not be necessary by the spec (Rafael Wysocki).
 
  - Add empty stubs for CPPC-related functions to be used when
    CONFIG_ACPI_CPPC_LIB is not set (Rafael Wysocki).
 
  - Simplify device enumeration code (Rafael Wysocki).
 
  - Change device enumeration code to use match_string() for string
    matching (Andy Shevchenko).
 
  - Modify irqresource_disabled() to retain the resouce flags that
    have been set already (Angela Czubak).
 
  - Add native backlight whitelist entry for GA401/GA502/GA503 (Luke
    Jones).
 
  - Modify the ACPI backlight driver to let the native backlight
    handling take over on hardware-reduced systems (Hans de Goede).
 
  - Introduce acpi_dev_get() and switch over the ACPI core code to
    using it (Andy Shevchenko).
 
  - Use kobj_attribute as callback argument instead of a local struct
    type in the CPPC linrary code (Nathan Chancellor).
 
  - Drop unneeded initializatio of a static variable from the ACPI
    processor driver (Tian Tao).
 
  - Drop unnecessary local variable assignment from the ACPI APEI
    code (Colin Ian King).
 
  - Document for_each_acpi_dev_match() macro (Andy Shevchenko).
 
  - Address assorted coding style issues in multiple places (Xiaofei
    Tan).
 
  - Capitalize TLAs in a few comments (Andy Shevchenko).
 
  - Correct assorted typos in comments (Tom Saeger).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmCHAL8SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxZroQAIdFsRUTKmm8st9sdfEtF3QHLS3/EV2x
 1GlkL+3yE/WuEFXNd0mAv0MTcV2sNMKGd5oz74zLkciPC2dNR4168Ni6DhGSoELM
 0ZMOAu9E12Nyq7/1FdWalLQprtR8OuLVwgC2VckK+f//4vzpZ+6PtGMwAwtImSHK
 m3WRPimVbgOVJ1UWZjsfIm7kLBD4o4oCx0pdeEl77q0oQKmMdcByUh2YnjwKzFnP
 9zqV+SCi3HL4w67HO/uMe7x8isNyWONYXVqOvOkgXi7PeoX9v0XiWSCJ0KnAvbI1
 PZokJT8pTrKnFyL3zJS6pU/ZHj7ikFiTc+MfyyPcYRJZ5nBvRjqHKoPOtZ9yfU6n
 jgt/u3REhqwnHy0ikS8HsP+PWnAJF1Re3sNVvIMnX6XxTIndHCXZEoeldfeC23S9
 PmzGA0//iPngiYaOVM5BxIjRi2nRBHlVvzSIACICXDcszA81RHePFIzfjUgW3elp
 v6kAhkrXYajqrDb7NuvY4MTuuBo8w3q2xWJGu5VlDkNOblM0AExRhXmvp1RW0kL7
 +mi5X6xBFEB9M6hEoWKnleaZTXTlFYBreKsMPEEP7N7a5+UZRPedcjX1PflCkOB3
 uL5p/+x3br1fkDyK0P7wFf3VqiBXuwFajEdCmyHnizpD6m0oWC6pv9PUGYUCneJ1
 JGH5X/3Uu33D
 =5fuB
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the most recent upstream
  revision including (but not limited to) new material introduced in the
  6.4 version of the spec, update message printing in the ACPI-related
  code, address a few issues and clean up code in a number of places.

  Specifics:

   - Update ACPICA code in the kernel to upstream revision 20210331
     including the following changes:

      * Add parsing for IVRS IVHD 40h and device entry F0h (Alexander
        Monakov).

      * Add new CEDT table for CXL 2.0 and iASL support for it (Ben
        Widawsky, Bob Moore).

      * NFIT: add Location Cookie field (Bob Moore).

      * HMAT: add new fields/flags (Bob Moore).

      * Add new flags in SRAT (Bob Moore).

      * PMTT: add new fields/structures (Bob Moore).

      * Add CSI2Bus resource template (Bob Moore).

      * iASL: Decode subtable type field for VIOT (Bob Moore).

      * Fix various typos and spelling mistakes (Colin Ian King).

      * Add new predefined objects _BPC, _BPS, and _BPT (Erik Kaneda).

      * Add USB4 capabilities UUID (Erik Kaneda).

      * Add CXL ACPI device ID and _CBR object (Erik Kaneda).

      * MADT: add Multiprocessor Wakeup Structure (Erik Kaneda).

      * PCCT: add support for subtable type 5 (Erik Kaneda).

      * PPTT: add new version of subtable type 1 (Erik Kaneda).

      * Add SDEV secure access components (Erik Kaneda).

      * Add support for PHAT table (Erik Kaneda).

      * iASL: Add definitions for the VIOT table (Jean-Philippe
        Brucker).

      * acpisrc: Add missing conversion for VIOT support (Jean-Philippe
        Brucker).

      * IORT: Updates for revision E.b (Shameer Kolothum).

   - Rearrange message printing in ACPI-related code to avoid using the
     ACPICA's internal message printing macros outside ACPICA and do
     some related code cleanups (Rafael Wysocki).

   - Modify the device enumeration code to turn off all of the unused
     ACPI power resources at the end (Rafael Wysocki).

   - Change the ACPI power resources handling code to turn off unused
     ACPI power resources without checking their status which should not
     be necessary by the spec (Rafael Wysocki).

   - Add empty stubs for CPPC-related functions to be used when
     CONFIG_ACPI_CPPC_LIB is not set (Rafael Wysocki).

   - Simplify device enumeration code (Rafael Wysocki).

   - Change device enumeration code to use match_string() for string
     matching (Andy Shevchenko).

   - Modify irqresource_disabled() to retain the resouce flags that have
     been set already (Angela Czubak).

   - Add native backlight whitelist entry for GA401/GA502/GA503 (Luke
     Jones).

   - Modify the ACPI backlight driver to let the native backlight
     handling take over on hardware-reduced systems (Hans de Goede).

   - Introduce acpi_dev_get() and switch over the ACPI core code to
     using it (Andy Shevchenko).

   - Use kobj_attribute as callback argument instead of a local struct
     type in the CPPC linrary code (Nathan Chancellor).

   - Drop unneeded initializatio of a static variable from the ACPI
     processor driver (Tian Tao).

   - Drop unnecessary local variable assignment from the ACPI APEI code
     (Colin Ian King).

   - Document for_each_acpi_dev_match() macro (Andy Shevchenko).

   - Address assorted coding style issues in multiple places (Xiaofei
     Tan).

   - Capitalize TLAs in a few comments (Andy Shevchenko).

   - Correct assorted typos in comments (Tom Saeger)"

* tag 'acpi-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
  ACPI: video: use native backlight for GA401/GA502/GA503
  ACPI: APEI: remove redundant assignment to variable rc
  ACPI: utils: Capitalize abbreviations in the comments
  ACPI: utils: Document for_each_acpi_dev_match() macro
  ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI code
  ACPI: scan: Utilize match_string() API
  resource: Prevent irqresource_disabled() from erasing flags
  ACPI: CPPC: Replace cppc_attr with kobj_attribute
  ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids()
  ACPI: scan: Drop sta argument from acpi_init_device_object()
  ACPI: scan: Drop sta argument from acpi_add_single_object()
  ACPI: scan: Rearrange checks in acpi_bus_check_add()
  ACPI: scan: Fold acpi_bus_type_and_status() into its caller
  ACPI: video: Check LCD flag on ACPI-reduced-hardware devices
  ACPI: utils: Add acpi_reduced_hardware() helper
  ACPI: dock: fix some coding style issues
  ACPI: sysfs: fix some coding style issues
  ACPI: PM: add a missed blank line after declarations
  ACPI: custom_method: fix a coding style issue
  ACPI: CPPC: fix some coding style issues
  ...
2021-04-26 15:03:23 -07:00
Linus Torvalds
90035c28f1 platform-drivers-x86 for v5.13-1
Highlights:
  - Lots of Microsoft Surface work
  - platform-profile support for HP and Microsoft Surface devices
  - New WMI Gigabyte motherboard temperature monitoring driver
  - Intel PMC improvements for Tiger Lake and Alder Lake
  - Misc. bugfixes, improvements and quirk additions all over
 
 The following is an automated git shortlog grouped by driver:
 
 Add support for DYTC MMC_GET BIOS API.:
  - Add support for DYTC MMC_GET BIOS API.
 
 Adjust Dell drivers to a personal email address:
  - Adjust Dell drivers to a personal email address
 
 Fix typo in Kconfig:
  - Fix typo in Kconfig
 
 ISST:
  -  Account for increased timeout in some cases
 
 MAINTAINERS:
  -  Add missing section for alienware-wmi driver
  -  Adjust Dell drivers to email alias
  -  update MELLANOX HARDWARE PLATFORM SUPPORT maintainers
 
 Merge tag 'ib-mfd-platform-x86-v5.13' into review-hans:
  - Merge tag 'ib-mfd-platform-x86-v5.13' into review-hans
 
 Merge tag 'irq-no-autoen-2021-03-25' into review-hans:
  - Merge tag 'irq-no-autoen-2021-03-25' into review-hans
 
 Typo fix in the file classmate-laptop.c:
  - Typo fix in the file classmate-laptop.c
 
 add Gigabyte WMI temperature driver:
  - add Gigabyte WMI temperature driver
 
 add support for Advantech software defined button:
  - add support for Advantech software defined button
 
 asus-laptop:
  -  fix kobj_to_dev.cocci warnings
 
 asus-wmi:
  -  Add param to turn fn-lock mode on by default
 
 dell-wmi-sysman:
  -  Make init_bios_attributes() ACPI object parsing more robust
  -  Cleanup create_attributes_level_sysfs_files()
  -  Make sysman_init() return -ENODEV of the interfaces are not found
  -  Cleanup sysman_init() error-exit handling
  -  Fix release_attributes_data() getting called twice on init_bios_attributes() failure
  -  Make it safe to call exit_foo_attributes() multiple times
  -  Fix possible NULL pointer deref on exit
  -  Fix crash caused by calling kset_unregister twice
 
 docs:
  -  driver-api: Add Surface DTX driver documentation
 
 genirq:
  -  Add IRQF_NO_AUTOEN for request_irq/nmi()
 
 gigabyte-wmi:
  -  add support for B550M AORUS PRO-P
  -  add X570 AORUS ELITE
 
 hp-wmi:
  -  add platform profile support
  -  rename "thermal policy" to "thermal profile"
 
 intel-hid:
  -  Fix spurious wakeups caused by tablet-mode events during suspend
  -  Support Lenovo ThinkPad X1 Tablet Gen 2
 
 intel-vbtn:
  -  Remove unused KEYMAP_LEN define
  -  Stop reporting SW_DOCK events
 
 intel_chtdc_ti_pwrbtn:
  -  Fix missing IRQF_ONESHOT as only threaded handler
 
 intel_pmc_core:
  -  Uninitialized data in pmc_core_lpm_latch_mode_write()
  -  add ACPI dependency
  -  Fix "unsigned 'ret' is never less than zero" smatch warning
  -  Add support for Alder Lake PCH-P
  -  Add LTR registers for Tiger Lake
  -  Add option to set/clear LPM mode
  -  Add requirements file to debugfs
  -  Get LPM requirements for Tiger Lake
  -  Show LPM residency in microseconds
  -  Handle sub-states generically
  -  Remove global struct pmc_dev
  -  Don't use global pmcdev in quirks
  -  export platform global reset bits via etr3 sysfs file
  -  Ignore GBE LTR on Tiger Lake platforms
  -  Update Kconfig
 
 intel_pmt_class:
  -  Initial resource to 0
 
 intel_pmt_crashlog:
  -  Fix incorrect macros
 
 mfd:
  -  intel_pmt: Add support for DG1
  -  intel_pmt: Fix nuisance messages and handling of disabled capabilities
 
 panasonic-laptop:
  -  remove redundant assignment of variable result
 
 platform:
  -  x86: ACPI: Get rid of ACPICA message printing
 
 platform/mellanox:
  -  mlxreg-hotplug: move to use request_irq by IRQF_NO_AUTOEN flag
  -  Typo fix in the file mlxbf-bootctl.c
 
 platform/surface:
  -  aggregator: fix a bit test
  -  aggregator: move to use request_irq by IRQF_NO_AUTOEN flag
  -  aggregator_registry: Give devices time to set up when connecting
  -  clean up a variable in surface_dtx_read()
  -  fix semicolon.cocci warnings
  -  aggregator_registry: Add support for Surface Pro 7+
  -  aggregator_registry: Make symbol 'ssam_base_hub_group' static
  -  dtx: Add support for native SSAM devices
  -  Add DTX driver
  -  aggregator: Make SSAM_DEFINE_SYNC_REQUEST_x define static functions
  -  Add platform profile driver
  -  aggregator_registry: Add HID subsystem devices
  -  aggregator_registry: Add DTX device
  -  aggregator_registry: Add platform profile device
  -  aggregator_registry: Add battery subsystem devices
  -  aggregator_registry: Add base device hub
  -  Set up Surface Aggregator device registry
 
 pmc_atom:
  -  Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
 
 thinkpad_acpi:
  -  Add labels to the first 2 temperature sensors
  -  Correct thermal sensor allocation
  -  Correct minor typo
  -  sysfs interface to get wwan antenna type
  -  Disable DYTC CQL mode around switching to balanced mode
  -  Allow the FnLock LED to change state
  -  check dytc version for lapmode sysfs
  -  Handle keyboard cover attach/detach events
 
 tools/power/x86/intel-speed-select:
  -  v1.9 release
  -  Drop __DATE__ and __TIME__ macros
  -  Add options to force online
  -  Process mailbox read error for core-power
  -  Increase string size
 
 touchscreen_dmi:
  -  Add info for the Teclast Tbook 11 tablet
  -  Handle device properties with software node API
 
 wmi:
  -  Make remove callback return void
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmCGbVEUHGhkZWdvZWRl
 QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9x4ywgAo51ExPQcLMlEDdfpN7oa0ErT+4AF
 lKqOHO/g3Am63NwlAVZElKAJq+AChfQzZ+Idy9E/IirFplmhuoKBBRQoB+U9SwYS
 zerwNDwAh1j1ZLlWDo0BSsiJLdGJH3j5BvScjo57+Vfa75J9EofIGXvNEjLNxb7j
 djLc4FawAfaqL6YerKXZPvYIfpIw2+26SyxDw2s6KlYyBkPIEneQvto0ObWR3vLc
 1iFxLgfxL1fYX7dD9e/9H84kIQzs/wgTduXmnSn32BcFw3YOtWpnpwB0wJ8IIXM0
 8Ta6jH2ZGTbgfKaHZf2O+UObj8tRXFzjpx4neh5vybRrBsYELzQIm+W+jQ==
 =fsK6
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates freom Hans de Goede:

 - lots of Microsoft Surface work

 - platform-profile support for HP and Microsoft Surface devices

 - new WMI Gigabyte motherboard temperature monitoring driver

 - Intel PMC improvements for Tiger Lake and Alder Lake

 - misc bugfixes, improvements and quirk additions all over

* tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
  platform/x86: gigabyte-wmi: add support for B550M AORUS PRO-P
  platform/x86: intel_pmc_core: Uninitialized data in pmc_core_lpm_latch_mode_write()
  platform/x86: intel_pmc_core: add ACPI dependency
  platform/surface: aggregator: fix a bit test
  platform/x86: intel_pmc_core: Fix "unsigned 'ret' is never less than zero" smatch warning
  platform/x86: touchscreen_dmi: Add info for the Teclast Tbook 11 tablet
  platform/x86: intel_pmc_core: Add support for Alder Lake PCH-P
  platform/x86: intel_pmc_core: Add LTR registers for Tiger Lake
  platform/x86: intel_pmc_core: Add option to set/clear LPM mode
  platform/x86: intel_pmc_core: Add requirements file to debugfs
  platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake
  platform/x86: intel_pmc_core: Show LPM residency in microseconds
  platform/x86: intel_pmc_core: Handle sub-states generically
  platform/x86: intel_pmc_core: Remove global struct pmc_dev
  platform/x86: intel_pmc_core: Don't use global pmcdev in quirks
  platform/x86: intel_chtdc_ti_pwrbtn: Fix missing IRQF_ONESHOT as only threaded handler
  platform/x86: gigabyte-wmi: add X570 AORUS ELITE
  platform/x86: thinkpad_acpi: Add labels to the first 2 temperature sensors
  platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
  platform/x86: add Gigabyte WMI temperature driver
  ...
2021-04-26 10:58:33 -07:00
Srinivas Pandruvada
61ce18ff01 tools/power/x86/intel-speed-select: v1.9 release
This release adds following changes:
- Support increased number of CPUs
- Return error when mailbox commmand fails to enable core-power
- Option to online all CPUs
- Removes build date and time print

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-07 19:47:22 +02:00
Antonio Terceiro
17de9a5654 tools/power/x86/intel-speed-select: Drop __DATE__ and __TIME__ macros
These macros introduce nondeterminism in builds, and break reproducible
builds.

Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-07 19:47:22 +02:00
Srinivas Pandruvada
0d3dfd7570 tools/power/x86/intel-speed-select: Add options to force online
It is possible that users manually offlined CPUs via sysfs interface
and then started this utility. In this case we will not be able to get
package and die id of the those CPUs. So add an option to force online
if required for some commands.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-07 19:47:22 +02:00
Srinivas Pandruvada
b84733a1c5 tools/power/x86/intel-speed-select: Process mailbox read error for core-power
Some older kernels don't support reading core-power status. In that case
mailbox command fails. So, display core-power status as "unknown" instead
of supported.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-07 19:47:22 +02:00
Srinivas Pandruvada
2e70b710f3 tools/power/x86/intel-speed-select: Increase string size
The current string size to print cpulist can accommodate upto 80
logical CPUs per package. But this limit is not enough. So increase
the string size. Also prevent buffer overflow, if the string size
reaches limit.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-07 19:47:22 +02:00
Colin Ian King
e527db8f39 ACPICA: Tree-wide: fix various typos and spelling mistakes
This commit squashes the following:
ACPICA commit bc8939e2d902653e71bb1601b129a993c37fcfad
ACPICA commit 2d9e5e98e23f2a569e5691e6bed183146e25798d
ACPICA commit 937358156631ea7a0eef3569c213c82a031097d5

Fix more spelling issues found using the codespell checker and found
without tools.

Link: https://github.com/acpica/acpica/commit/bc8939e2
Link: https://github.com/acpica/acpica/commit/2d9e5e98
Link: https://github.com/acpica/acpica/commit/93735815

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07 19:09:00 +02:00
Randy Dunlap
800c120ef4 tools/turbostat: Unmark non-kernel-doc comment
Do not mark a comment as kernel-doc notation when it is not meant to be
in kernel-doc notation.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210325201333.16792-1-rdunlap@infradead.org
2021-03-25 23:10:45 +01:00
Ricardo Ribalda
b7e23e54a9 pm-graph: Fix typo "accesible"
Trivial fix.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-22 15:27:17 +01:00
Linus Torvalds
983e4adae0 platform-drivers-x86 for v5.12-1
- Microsoft Surface devices System Aggregator Module support
 - SW_TABLET_MODE reporting improvements
 - thinkpad_acpi keyboard language setting support
 - platform / DPTF profile settings support
  - Base / userspace API parts merged from Rafael's acpi-platform branch
  - thinkpad_acpi and ideapad-laptop support through pdx86
 - Remove support for some obsolete Intel MID platforms through merging
   of the shared intel-mid-removal branch
 - Big cleanup of the ideapad-laptop driver
 - Misc. other fixes / new hw support / quirks
 
 The following is an automated git shortlog grouped by driver:
 
 ACPI:
  -  platform-profile: Fix possible deadlock in platform_profile_remove()
  -  platform-profile: Introduce object pointers to callbacks
  -  platform-profile: Drop const qualifier for cur_profile
  -  platform: Add platform profile support
 
 Documentation:
  -  Add documentation for new platform_profile sysfs attribute
 
 Documentation/ABI:
  -  sysfs-platform-ideapad-laptop: conservation_mode attribute
  -  sysfs-platform-ideapad-laptop: update device attribute paths
 
 Kconfig:
  -  add missing selects for ideapad-laptop
 
 MAINTAINERS:
  -  update email address for Henrique de Moraes Holschuh
 
 Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
  - Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
 
 Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans:
  - Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans
 
 Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next:
  - Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next
 
 Move all dell drivers to their own subdirectory:
  - Move all dell drivers to their own subdirectory
 
 Platform:
  -  OLPC: Constify static struct regulator_ops
  -  OLPC: Specify the enable time
  -  OLPC: Remove dcon_rdev from olpc_ec_priv
  -  OLPC: Fix probe error handling
 
 Revert "platform/x86:
  -  ideapad-laptop: Switch touchpad attribute to be RO"
 
 acer-wmi:
  -  Don't use ACPI_EXCEPTION()
 
 amd-pmc:
  -  put device on error paths
  -  Fix CONFIG_DEBUG_FS check
 
 dell-wmi-sysman:
  -  fix a NULL pointer dereference
 
 docs:
  -  driver-api: Add Surface Aggregator subsystem documentation
 
 drm/gma500:
  -  Get rid of duplicate NULL checks
  -  Convert to use new SCU IPC API
 
 gpio:
  -  msic: Remove driver for deprecated platform
  -  intel-mid: Remove driver for deprecated platform
 
 hp-wmi:
  -  Disable tablet-mode reporting by default
  -  Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
 
 i2c-multi-instantiate:
  -  Don't create platform device for INT3515 ACPI nodes
 
 ideapad-laptop:
  -  add "always on USB charging" control support
  -  add keyboard backlight control support
  -  send notification about touchpad state change to sysfs
  -  fix checkpatch warnings, more consistent style
  -  change 'cfg' debugfs file format
  -  change 'status' debugfs file format
  -  check for touchpad support in _CFG
  -  check for Fn-lock support in HALS
  -  rework is_visible() logic
  -  rework and create new ACPI helpers
  -  group and separate (un)related constants into enums
  -  misc. device attribute changes
  -  always propagate error codes from device attributes' show() callback
  -  convert ACPI helpers to return -EIO in case of failure
  -  use dev_{err,warn} or appropriate variant to display log messages
  -  use msecs_to_jiffies() helper instead of hand-crafted formula
  -  use for_each_set_bit() helper to simplify event processing
  -  use kobj_to_dev()
  -  use device_{add,remove}_group
  -  use sysfs_emit()
  -  add missing call to submodule destructor
  -  sort includes lexicographically
  -  use appropriately typed variable to store the return value of ACPI methods
  -  remove unnecessary NULL checks
  -  remove unnecessary dev_set_drvdata() call
  -  DYTC Platform profile support
  -  Disable touchpad_switch for ELAN0634
 
 intel-vbtn:
  -  Eval VBDL after registering our notifier
  -  Add alternative method to enable switches
  -  Create 2 separate input-devs for buttons and switches
  -  Rework wakeup handling in notify_handler()
  -  Drop HP Stream x360 Convertible PC 11 from allow-list
  -  Support for tablet mode on Dell Inspiron 7352
 
 intel_mid_powerbtn:
  -  Remove driver for deprecated platform
  -  Remove driver for deprecated platform
 
 intel_mid_thermal:
  -  Remove driver for deprecated platform
  -  Remove driver for deprecated platform
 
 intel_pmt:
  -  Make INTEL_PMT_CLASS non-user-selectable
 
 intel_pmt_crashlog:
  -  Add dependency on MFD_INTEL_PMT
 
 intel_pmt_telemetry:
  -  Add dependency on MFD_INTEL_PMT
 
 intel_scu_ipc:
  -  Increase virtual timeout from 3 to 5 seconds
 
 intel_scu_wdt:
  -  Drop mistakenly added const
  -  Get rid of custom x86 model comparison
  -  Drop SCU notification
  -  Move driver from arch/x86
 
 msi-wmi:
  -  Fix variable 'status' set but not used compiler warning
 
 platform/surface:
  -  aggregator: Fix access of unaligned value
  -  Add Surface Hot-Plug driver
  -  surface3-wmi: Fix variable 'status' set but not used compiler warning
  -  aggregator: Fix braces in if condition with unlikely() macro
  -  aggregator: Fix kernel-doc references
  -  aggregator: fix a kernel-doc markup
  -  aggregator_cdev: Add comments regarding unchecked allocation size
  -  aggregator_cdev: Fix access of uninitialized variables
  -  fix potential integer overflow on shift of a int
  -  Add Surface ACPI Notify driver
  -  Add Surface Aggregator user-space interface
  -  aggregator: Add dedicated bus and device type
  -  aggregator: Add error injection capabilities
  -  aggregator: Add trace points
  -  aggregator: Add event item allocation caching
  -  aggregator: Add control packet allocation caching
  -  Add Surface Aggregator subsystem
  -  SURFACE_PLATFORMS should depend on ACPI
  -  surface_gpe: Fix non-PM_SLEEP build warnings
 
 platform/x86/intel-uncore-freq:
  -  Add Sapphire Rapids server support
 
 rtc:
  -  mrst: Remove driver for deprecated platform
 
 sony-laptop:
  -  Remove unneeded semicolon
 
 thinkpad_acpi:
  -  Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
  -  Fix 'warning: no previous prototype for' warnings
  -  Add platform profile support
  -  fixed warning and incorporated review comments
  -  rectify length of title underline
  -  Don't register keyboard_lang unnecessarily
  -  set keyboard language
  -  Add P53/73 firmware to fan_quirk_table for dual fan control
  -  correct palmsensor error checking
 
 tools/power/x86/intel-speed-select:
  -  Update version to 1.8
  -  Add new command to get/set TRL
  -  Add new command turbo-mode
  -  Set higher of cpuinfo_max_freq or base_frequency
  -  Set scaling_max_freq to base_frequency
 
 touchscreen_dmi:
  -  Add info for the Jumper EZpad 7 tablet
  -  Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
 
 watchdog:
  -  intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
  -  intel_scu_watchdog: Remove driver for deprecated platform
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmAqZ5cUHGhkZWdvZWRl
 QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zmuwf/XLoZzs6oW7Ps9DhkyU5lk7D79rti
 DY4AabVnWZhJ+Yl5+qMCTjC0R0nJYoq9PCDU5q20HHSFq7PXV0fPEVo7ZOp8tPng
 wdzb2glbtGjSWksjj3c8eB/jjPP0tpsWptH+9jlTv9yXwQNVh/rPVltmD+z8y69U
 qNzySltQMtoKmQKNbktUeHA12jBldnH+QlkL8KUp5ZEVDd7gukkmAovpzEcnwk5U
 lrza7I52c9Ggu1pD2OCX7an9tk6N7mQ6Rk2/c6GzRsOYa6SC5Aj7fi2bs0LRdGGx
 Kz/gtKS3dRIreEs4LGmL8byVi7a/YvCQoTfO+MxKq/btedBwxO2edDDsRg==
 =B+Fz
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - Microsoft Surface devices System Aggregator Module support

   - SW_TABLET_MODE reporting improvements

   - thinkpad_acpi keyboard language setting support

   - platform / DPTF profile settings support:

      - Base / userspace API parts merged from Rafael's acpi-platform
        branch

      - thinkpad_acpi and ideapad-laptop support through pdx86

   - Remove support for some obsolete Intel MID platforms through
     merging of the shared intel-mid-removal branch

   - Big cleanup of the ideapad-laptop driver

   - Misc other fixes / new hw support / quirks"

* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
  platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
  platform/surface: aggregator: Fix access of unaligned value
  tools/power/x86/intel-speed-select: Update version to 1.8
  tools/power/x86/intel-speed-select: Add new command to get/set TRL
  tools/power/x86/intel-speed-select: Add new command turbo-mode
  Platform: OLPC: Constify static struct regulator_ops
  platform/surface: Add Surface Hot-Plug driver
  platform/x86: intel_scu_wdt: Drop mistakenly added const
  platform/x86: Kconfig: add missing selects for ideapad-laptop
  platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
  platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
  platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
  platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
  platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
  platform/x86: Move all dell drivers to their own subdirectory
  Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
  Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
  platform/x86: ideapad-laptop: add "always on USB charging" control support
  platform/x86: ideapad-laptop: add keyboard backlight control support
  platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
  ...
2021-02-22 08:50:01 -08:00
Linus Torvalds
3c8f504b3a ACPI updates for 5.12-rc1
- Update ACPICA code in the kernel to upstream revision 20201113
    with changes as follows:
 
    * Remove the MTMR (Mid-Timer) table (Al Stone).
    * Remove the VRTC table (Al Stone).
    * Add type casts for string functions (Bob Moore).
    * Update all copyrights to 2021 (Bob Moore).
    * Fix exception code class checks (Maximilian Luz).
    * Clean up exception code class checks (Maximilian Luz).
    * Fix -Wfallthrough (Nick Desaulniers).
 
  - Add support for setting and reading global profile of the platform
    along with documentation (Mark Pearson, Hans de Goede, Jiaxun Yang).
 
  - Fix fwnode properties matching and clean up the code handling
    device properties and its documentation (Rafael Wysocki, Andy
    Shevchenko).
 
  - Clean up ACPI-based device enumeration code (Rafael Wysocki).
 
  - Clean up the CPPC support library code (Ionela Voinescu).
 
  - Clean up the APEI support code (Yang Li, Yazen Ghannam).
 
  - Update GPIO-related properties documentation (Flavio Suligoi).
 
  - Consolidate and clean up the printing of messages in several
    places (Rafael Wysocki).
 
  - Fix error code path in configfs handling code (Qinglang Miao).
 
  - Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray).
 
  - Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in
    multiple places (Bjorn Helgaas).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmAqu2wSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxyWYQAIGKknnitF3TxHyXj5Ka+RQXlvygYAZo
 9rQHy9EwUjkWpEiMZf87haWr3bp3EY1y7CnSdYiL9JgRJP9bqXI4ZQO8R2vXpV03
 NJ46NO7/qNGF1dp5Zbt/QSObkk1yloqNPzU3gH/yo+xNHEc0OzjD9roJr7QA1Oes
 ibCCmSG9mpMOVdNCzwIK+hiY6IdQCWIQyY/DZwTaf66U1+ZVTLsWNtVWzADNOKIz
 DcXW54LZAt7c8kNcwwRxqAac+JOQ/RWBpvnexwgPEV82blad/+nd9egHlTjiEJCl
 fxBmnMNqRcClrgo5SCvJNh1Z17d3bzhPUbF1K2RMiim2JSRXAZxK8euxVGTff2zI
 SKsgFcOqLPHYtM0po5V7fgYCRnk6M1aI44s26JCei5hSM1TrlwddKIuR/D42/73O
 F4TCGmkJMEUFltkpUAqo4gqoZcB7TZW/YX7pjy59yNw0VP8mGQSu+xU1SEdvasTg
 XYbVeFUoDe6QLGqu8ukDq7GeXnV16t6Q2b2A+RxmFaKFZGGUH+IPKQp1XbGLnhnM
 JKirrQnwwHqCZOu7D4LoSOgUvHYIF7B+nTA10QA5liq3XvYwjszFOG79cBImSaeV
 jxx7rgoZ55H45gfB2kQE6OwO7RmFZ4bEB4/k/Oav7ewOPFiY5hrxJt2OIaJYLE87
 pcGH533ZlBoS
 =WpL7
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20210105, fix and clean up the handling of device properties, add
  support for setting global profile of the platform, clean up device
  enumeration, the CPPC library, the APEI support and more, update the
  documentation, consolidate the printing of messages in several places
  and make assorted janitorial changes.

  Specifics:

   - Update ACPICA code in the kernel to upstream revision 20201113 with
     changes as follows:

      * Remove the MTMR (Mid-Timer) table (Al Stone).
      * Remove the VRTC table (Al Stone).
      * Add type casts for string functions (Bob Moore).
      * Update all copyrights to 2021 (Bob Moore).
      * Fix exception code class checks (Maximilian Luz).
      * Clean up exception code class checks (Maximilian Luz).
      * Fix -Wfallthrough (Nick Desaulniers).

   - Add support for setting and reading global profile of the platform
     along with documentation (Mark Pearson, Hans de Goede, Jiaxun
     Yang).

   - Fix fwnode properties matching and clean up the code handling
     device properties and its documentation (Rafael Wysocki, Andy
     Shevchenko).

   - Clean up ACPI-based device enumeration code (Rafael Wysocki).

   - Clean up the CPPC support library code (Ionela Voinescu).

   - Clean up the APEI support code (Yang Li, Yazen Ghannam).

   - Update GPIO-related properties documentation (Flavio Suligoi).

   - Consolidate and clean up the printing of messages in several places
     (Rafael Wysocki).

   - Fix error code path in configfs handling code (Qinglang Miao).

   - Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray).

   - Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in
     multiple places (Bjorn Helgaas)"

* tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
  ACPI: property: Satisfy kernel doc validator (part 2)
  ACPI: property: Satisfy kernel doc validator (part 1)
  ACPI: property: Make acpi_node_prop_read() static
  ACPI: property: Remove dead code
  ACPI: property: Fix fwnode string properties matching
  ACPI: OSL: Clean up printing messages
  ACPI: OSL: Rework acpi_check_resource_conflict()
  ACPI: APEI: ERST: remove unneeded semicolon
  ACPI: thermal: Clean up printing messages
  ACPI: video: Clean up printing messages
  ACPI: button: Clean up printing messages
  ACPI: battery: Clean up printing messages
  ACPI: AC: Clean up printing messages
  ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
  ACPI: utils: Clean up printing messages
  ACPI: scan: Clean up printing messages
  ACPI: bus: Clean up printing messages
  ACPI: PM: Clean up printing messages
  ACPI: power: Clean up printing messages
  ACPI: APEI: Add is_generic_error() to identify GHES sources
  ...
2021-02-20 21:50:59 -08:00
Rafael J. Wysocki
938bdd1d7d Merge back ACPICA material for v5.12. 2021-02-10 19:12:12 +01:00
Srinivas Pandruvada
2a76d235bc tools/power/x86/intel-speed-select: Update version to 1.8
Update version for changes released with v5.12 kernel release.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2021-02-08 11:56:55 -08:00
Srinivas Pandruvada
2c7dc57e9e tools/power/x86/intel-speed-select: Add new command to get/set TRL
Add a new command to get and set TRL (Turbo Ratio Limits). This will
help users to get/set TRL, when the direct MSR access is removed.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2021-02-08 11:54:58 -08:00
Srinivas Pandruvada
006050a6bd tools/power/x86/intel-speed-select: Add new command turbo-mode
Add a new command "turbo-mode", which allows to enable/disable
turbo mode globally. This uses base-frequency as the max frequency
when turbo-mode is disabled. This allows soft disable turbo mode
without depending on kernel or BIOS.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2021-02-08 11:54:58 -08:00
Rafael J. Wysocki
a51d185681 linux-cpupower-5.12-rc1
This cpupower update for Linux 5.12-rc1 consists of:
 
 - Updates to the cpupower command to add support for AMD family 0x19
   and cleanup the code to remove many of the family checks to make
   future family updates easier.
 
 - Adding Makefile dependencies for install targets to allow building
   cpupower in parallel rather than serially.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmAhYN8ACgkQCwJExA0N
 Qxz/RBAAr+HWZ13OaLRpuenQuD29p8z+ZrK1opU1lU9Is9w2ck3qIKwyPwVISWy3
 x8wlzyQzv6BxHTzSdWJ1IHn/dM8VOAuP3bCBrjrIUhflsX+X7Dst39tZX0Ne4X8z
 wGt3VFNYr5wbpClhb+Q2Fk1MMPSIte0stVvjsMPeSXZgAB1KPhesTYmnePimwv//
 kOKXGO3RKHtlfnkcQaljdnsyHalUtmsG48kmL6ex/WCN4D3Aojrlq1bIAfe5U+u0
 2iswYcrPiTY536B8E7d76zHyetat945nQ9TR2RRaF8kfEmoyCONFiGejXtSakAdv
 W1X/5I1egEO5a+oBNpieL7mPIoBZPU0vNXS8/zlYRu1zZ6BvNJ0FSJp1x9mnPME9
 16WcAq1uX6A30PlRPErrLqU5QgvQQqcxPKQBPK4kzCB5BBHUpbyunlcWaMmOOZ53
 ovV73ulugcaOcXlYrOdMPtD6DyFC2u70REveSq/pUk+L3rR6jEHKWyPXUNpIGsh4
 UNidy0bBSp45IbQHws3/e+2QP4Ida6sAqI8L2SnjzULQZtHxBsmffE/ks4WkdTzO
 D3crtAtTKWciSK6HkVgT+jUQnGWjZabrlqXrrY/jPx86hTwNYZhAgS+D4sx1uGrp
 r6mN9ye2vb9F/cK/P++I/gzJ7YU10kRdj9LuolvtwPkDFG6gyYk=
 =pqCu
 -----END PGP SIGNATURE-----

Merge tag 'linux-cpupower-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux

Pull cpupower utility update for v5.12-rc1 from Shuah Khan:

"This cpupower update for Linux 5.12-rc1 consists of:

 - Updates to the cpupower command to add support for AMD family 0x19
   and cleanup the code to remove many of the family checks to make
   future family updates easier.

 - Adding Makefile dependencies for install targets to allow building
   cpupower in parallel rather than serially."

* tag 'linux-cpupower-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
  cpupower: Add cpuid cap flag for MSR_AMD_HWCR support
  cpupower: Remove family arg to decode_pstates()
  cpupower: Condense pstate enabled bit checks in decode_pstates()
  cpupower: Update family checks when decoding HW pstates
  cpupower: Remove unused pscur variable.
  cpupower: Add CPUPOWER_CAP_AMD_HW_PSTATE cpuid caps flag
  cpupower: Correct macro name for CPB caps flag
  cpupower: Update msr_pstate union struct naming
  cpupower: add Makefile dependencies for install targets
2021-02-08 17:38:25 +01:00
Borislav Petkov
7f1b11ba35 tools/power/turbostat: Fallback to an MSR read for EPB
Commit

  6d6501d912 ("tools/power/turbostat: Read energy_perf_bias from sysfs")

converted turbostat to read the energy_perf_bias value from sysfs.
However, older kernels which do not have that file yet, would fail. For
those, fall back to the MSR reading.

Fixes: 6d6501d912 ("tools/power/turbostat: Read energy_perf_bias from sysfs")
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://lkml.kernel.org/r/20210127132444.981120-1-dedekind1@gmail.com
2021-02-03 11:58:19 +01:00
Nathan Fontenot
3a3ecfdb60 cpupower: Add cpuid cap flag for MSR_AMD_HWCR support
Remove the family check for accessing the MSR_AMD_HWCR MSR and replace
it with a cpupower cap flag.

This update also allows for the removal of the local cpupower_cpu_info
variable in cpufreq_has_boost_support() since we no longer need it to
check the family.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:45 -07:00
Nathan Fontenot
d1abc4e996 cpupower: Remove family arg to decode_pstates()
The decode_pstates() routine no longer uses the CPU family and
the caleed routines (get_cof() and get_did()) can grab the family
from the global cpupower_cpu_info struct. These update removes
passing the family arg to all these routines.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:39 -07:00
Nathan Fontenot
56a85eebeb cpupower: Condense pstate enabled bit checks in decode_pstates()
The enabled bit (bit 63) is common for all families so we can remove
the multiple enabled checks based on family and have a common check
for HW pstate enabled.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:32 -07:00
Nathan Fontenot
23765b82a8 cpupower: Update family checks when decoding HW pstates
The family checks in get_cof() and get_did() need to use the
correct MSR format depending on the family. Add a cpupower
capability for using the pstatedef (family 17h and newer) to
control this instead of direct family checks.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:26 -07:00
Nathan Fontenot
1421de7919 cpupower: Remove unused pscur variable.
The pscur variable is set but not uused, just remove it.

This may have previsously been set to validate the MSR_AMD_PSTATE_STATUS
MSR. With the addition of the CPUPOWER_CAP_AMD_HW_PSTATE cap flag this
is no longer needed since the cpuid bit to enable this cap flag also
validates that the MSR_AMD_PSTATE_STATUS MSR is present.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:21 -07:00
Nathan Fontenot
a0255a76bf cpupower: Add CPUPOWER_CAP_AMD_HW_PSTATE cpuid caps flag
Add a check in get_cpu_info() for the ability to read frequencies
from hardware and set the CPUPOWER_CAP_AMD_HW_PSTATE cpuid flag.
The cpuid flag is set when CPUID_80000007_EDX[7] is set,
which is all families >= 10h. The check excludes family 14h
because HW pstate reporting was not implemented on family 14h.

This is intended to reduce family checks in the main code paths.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:15 -07:00
Robert Richter
7a136a8fcd cpupower: Correct macro name for CPB caps flag
The name is Core Performance Boost (CPB) for the cpuid flag. Correct
cpuid caps flag to use this name (instead of CBP).

Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:08 -07:00
Nathan Fontenot
629d512d68 cpupower: Update msr_pstate union struct naming
The msr_pstate union struct named fam17h_bits is misleading since
this is the struct to use for all families >= 0x17, not just
for family 0x17. Rename the bits structs to be 'pstate' (for pre
family 17h CPUs) and 'pstatedef' (for CPUs since fam 17h) to align
closer with PPR/BDKG (1) naming.

There are no functional changes as part of this update.

1: AMD Processor Programming Reference (PPR) and BIOS and
Kernel Developer's Guide (BKDG) available at:
http://developer.amd.com/resources/developer-guides-manuals

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:39:54 -07:00
Bob Moore
4441e55d50 ACPICA: Updated all copyrights to 2021
This affects all ACPICA source code modules.

ACPICA commit c570953c914437e621dd5f160f26ddf352e0d2f4

Link: https://github.com/acpica/acpica/commit/c570953c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-22 15:51:53 +01:00
Ivan Babrou
fb7791e213 cpupower: add Makefile dependencies for install targets
This allows building cpupower in parallel rather than serially.

Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-05 11:29:27 -07:00
Srinivas Pandruvada
bbaa2e95e2 tools/power/x86/intel-speed-select: Set higher of cpuinfo_max_freq or base_frequency
In some case when BIOS disabled turbo, cpufreq cpuinfo_max_freq can be
lower than base_frequency at higher config level. So, in that case set
scaling_min_freq to base_frequency.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20201221071859.2783957-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04 15:54:27 +01:00
Srinivas Pandruvada
f981dc171c tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequency
When BIOS disables turbo, The scaling_max_freq in cpufreq sysfs will be
limited to config level 0 base frequency. But when user selects a higher
config levels, this will result in higher base frequency. But since
scaling_max_freq is still old base frequency, the performance will still
be limited. So when the turbo is disabled and cpufreq base_frequency is
higher than scaling_max_freq, update the scaling_max_freq to the
base_frequency.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20201221071859.2783957-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04 15:54:27 +01:00