leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

A much quieter cycle for documentation (happily), with, one hopes, the bulk

Browse Source 
of the churn behind us.  Significant stuff in this pull includes:
 
  - A set of new Chinese translations
  - Italian translation updates
  - A mechanism from Mauro to automatically format Documentation/features
    for the built docs
  - Automatic cross references without explicit :ref: markup
  - A new reset-controller document
  - An extensive new document on reporting problems from Thorsten
 
 That last patch also adds the CC-BY-4.0 license to LICENSES/dual; there was
 some discussion on this, but we seem to have consensus and an ack from Greg
 for that addition.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl/XyewPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YUeYH/AiNNlVIF/80T45TAkm+1kpy2Fb+d/5wbtGK
 PB7OTXPyDmmqwZNldlF9IsRhp5W+wYC3PNlulYMG44hT7/Jqf2CMFw8SOZqGLmBV
 LhWwoS+TAWLB19IOOMrVXbhAlNsX01NwBDY/dwONjW1Jcu+tuAsBR47T9lKjw4kJ
 qGFGMQTvZG9Ig1x7E6X38mAd7W3SD1viNuUePS2YcoB15GAocWfVVHvu1r+RHUTS
 27ET8tWzMMuiaCAD6toVY9L4T7iCI7YSPXQm8BOkf/f4LXDnpo8Fo11LE5ozTAh3
 +avnNt8vnrRXc06MnzwsvNHm2TqN97B4shkeDiPAV3ySXI8Zu/w=
 =HScX
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.11' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A much quieter cycle for documentation (happily), with, one hopes, the
  bulk of the churn behind us. Significant stuff in this pull includes:

   - A set of new Chinese translations

   - Italian translation updates

   - A mechanism from Mauro to automatically format
     Documentation/features for the built docs

   - Automatic cross references without explicit :ref: markup

   - A new reset-controller document

   - An extensive new document on reporting problems from Thorsten

  That last patch also adds the CC-BY-4.0 license to LICENSES/dual;
  there was some discussion on this, but we seem to have consensus and
  an ack from Greg for that addition"

* tag 'docs-5.11' of git://git.lwn.net/linux: (50 commits)
  docs: fix broken cross reference in translations/zh_CN
  docs: Note that sphinx 1.7 will be required soon
  docs: update requirements to install six module
  docs: reporting-issues: move 'outdated, need help' note to proper place
  docs: Update documentation to reflect what TAINT_CPU_OUT_OF_SPEC means
  docs: add a reset controller chapter to the driver API docs
  docs: make reporting-bugs.rst obsolete
  docs: Add a new text describing how to report bugs
  LICENSES: Add the CC-BY-4.0 license
  Documentation: fix multiple typos found in the admin-guide subdirectory
  Documentation: fix typos found in admin-guide subdirectory
  kernel-doc: Fix example in Nested structs/unions
  docs: clean up sysctl/kernel: titles, version
  docs: trace: fix event state structure name
  docs: nios2: add missing ReST file
  scripts: get_feat.pl: reduce table width for all features output
  scripts: get_feat.pl: change the group by order
  scripts: get_feat.pl: make complete table more coincise
  scripts: kernel-doc: fix parsing function-like typedefs
  Documentation: fix typos found in process, dev-tools, and doc-guide subdirectories
  ...
This commit is contained in:
Linus Torvalds 2020-12-14 16:55:54 -08:00
commit ff6135959a
135 changed files with 4225 additions and 441 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/ABI/testing/configfs-usb-gadget-ecm
View File

@ -7,7 +7,7 @@ Description:
ifname
- network device interface name associated with
this function instance
qmult
qmult
- queue length multiplier for high and
super speed
host_addr

20
Documentation/ABI/testing/procfs-attr-current Normal file
View File

@ -0,0 +1,20 @@
What: /proc/*/attr/current
Contact: linux-security-module@vger.kernel.org,
selinux@vger.kernel.org,
apparmor@lists.ubuntu.com
Description: The current security information used by a Linux
security module (LSM) that is active on the system.
The details of permissions required to read from
this interface and hence obtain the security state
of the task identified is LSM dependent.
A process cannot write to this interface unless it
refers to itself.
The other details of permissions required to write to
this interface and hence change the security state of
the task identified are LSM dependent.
The format of the data used by this interface is LSM
dependent.
SELinux, Smack and AppArmor provide this interface.
Users: SELinux user-space
Smack user-space
AppArmor user-space

20
Documentation/ABI/testing/procfs-attr-exec Normal file
View File

@ -0,0 +1,20 @@
What: /proc/*/attr/exec
Contact: linux-security-module@vger.kernel.org,
selinux@vger.kernel.org,
apparmor@lists.ubuntu.com
Description: The security information to be used on the process
by a Linux security module (LSM) active on the system
after a subsequent exec() call.
The details of permissions required to read from
this interface and hence obtain the security state
of the task identified is LSM dependent.
A process cannot write to this interface unless it
refers to itself.
The other details of permissions required to write to
this interface and hence change the security state of
the task identified are LSM dependent.
The format of the data used by this interface is LSM
dependent.
SELinux and AppArmor provide this interface.
Users: SELinux user-space
AppArmor user-space

19
Documentation/ABI/testing/procfs-attr-prev Normal file
View File

@ -0,0 +1,19 @@
What: /proc/*/attr/prev
Contact: linux-security-module@vger.kernel.org,
selinux@vger.kernel.org,
apparmor@lists.ubuntu.com
Description: The security information used on the process by
a Linux security module (LSM) active on the system
prior to the most recent exec() call.
The details of permissions required to read from
this interface is LSM dependent.
A process cannot write to this interface unless it
refers to itself.
The other details of permissions required to write to
this interface are LSM dependent.
The format of the data used by this interface is LSM
dependent.
SELinux and AppArmor provide this interface.
Users: SELinux user-space
AppArmor user-space

2
Documentation/ABI/testing/sysfs-devices-memory
View File

@ -19,7 +19,7 @@ Description:
identify removable sections of the memory before attempting
potentially expensive hot-remove memory operation
Users: hotplug memory remove tools
http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
What: /sys/devices/system/memory/memoryX/phys_device
Date: September 2008

2
Documentation/ABI/testing/sysfs-fs-ext4
View File

@ -33,7 +33,7 @@ What: /sys/fs/ext4/<disk>/mb_order2_req
Date: March 2008
Contact: "Theodore Ts'o" <tytso@mit.edu>
Description:
Tuning parameter which controls the minimum size for
Tuning parameter which controls the minimum size for
requests (as a power of 2) where the buddy cache is
used

2
Documentation/ABI/testing/sysfs-module
View File

@ -25,7 +25,7 @@ Description: Maximum time allowed for periodic transfers per microframe (μs)
However there are cases, when 80% max isochronous bandwidth is
too limiting. For example two video streams could require 110
microseconds of isochronous bandwidth per microframe to work
together.
together.
Through this setting it is possible to raise the limit so that
the host controller would allow allocating more than 100

2
Documentation/ABI/testing/sysfs-platform-renesas_usb3
View File

@ -12,6 +12,6 @@ Description:
- "peripheral" - switching mode from host to peripheral.
Read the file, then it shows the following strings:
- "host" - The mode is host now.
- "peripheral" - The mode is peripheral now.

4
Documentation/admin-guide/README.rst
View File

@ -398,8 +398,8 @@ If something goes wrong
If you for some reason cannot do the above (you have a pre-compiled
kernel image or similar), telling me as much about your setup as
possible will help. Please read the :ref:`admin-guide/reporting-bugs.rst <reportingbugs>`
document for details.
possible will help. Please read
'Documentation/admin-guide/reporting-issues.rst' for details.
- Alternatively, you can use gdb on a running kernel. (read-only; i.e. you
cannot change values or set break points.) To do this, first compile the

4
Documentation/admin-guide/acpi/cppc_sysfs.rst
View File

@ -8,7 +8,7 @@ CPPC
====
CPPC defined in the ACPI spec describes a mechanism for the OS to manage the
performance of a logical processor on a contigious and abstract performance
performance of a logical processor on a contiguous and abstract performance
scale. CPPC exposes a set of registers to describe abstract performance scale,
to request performance levels and to measure per-cpu delivered performance.
@ -45,7 +45,7 @@ for each cpu X::
* lowest_freq : CPU frequency corresponding to lowest_perf (in MHz).
* nominal_freq : CPU frequency corresponding to nominal_perf (in MHz).
The above frequencies should only be used to report processor performance in
freqency instead of abstract scale. These values should not be used for any
frequency instead of abstract scale. These values should not be used for any
functional decisions.
* feedback_ctrs : Includes both Reference and delivered performance counter.

2
Documentation/admin-guide/binderfs.rst
View File

@ -70,5 +70,5 @@ Deleting binder Devices
Binderfs binder devices can be deleted via `unlink() <unlink_>`_. This means
that the `rm() <rm_>`_ tool can be used to delete them. Note that the
``binder-control`` device cannot be deleted since this would make the binderfs
instance unuseable. The ``binder-control`` device will be deleted when the
instance unusable. The ``binder-control`` device will be deleted when the
binderfs instance is unmounted and all references to it have been dropped.

2
Documentation/admin-guide/blockdev/paride.rst
View File

@ -220,7 +220,7 @@ example::
Finally, you can load high-level drivers for each kind of device that
you have connected. By default, each driver will autoprobe for a single
device, but you can support up to four similar devices by giving their
individual co-ordinates when you load the driver.
individual coordinates when you load the driver.
For example, if you had two no-name CD-ROM drives both using the
KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc

2
Documentation/admin-guide/blockdev/zram.rst
View File

@ -360,7 +360,7 @@ like below::
/sys/block/zram0/writeback_limit.
$ echo 1 > /sys/block/zram0/writeback_limit_enable
If admins want to allow further write again once the bugdet is exhausted,
If admins want to allow further write again once the budget is exhausted,
he could do it like below::
$ echo $((400<<MB_SHIFT>>4K_SHIFT)) > \

2
Documentation/admin-guide/bug-bisect.rst
View File

@ -15,7 +15,7 @@ give up. Report as much as you have found to the relevant maintainer. See
MAINTAINERS for who that is for the subsystem you have worked on.
Before you submit a bug report read
:ref:`Documentation/admin-guide/reporting-bugs.rst <reportingbugs>`.
'Documentation/admin-guide/reporting-issues.rst'.
Devices not appearing
=====================

2
Documentation/admin-guide/bug-hunting.rst
View File

@ -263,7 +263,7 @@ Please notice that it will point to:
- The last developers that touched the source code (if this is done inside
a git tree). On the above example, Tejun and Bhaktipriya (in this
specific case, none really envolved on the development of this file);
specific case, none really involved on the development of this file);
- The driver maintainer (Hans Verkuil);
- The subsystem maintainer (Mauro Carvalho Chehab);
- The driver and/or subsystem mailing list (linux-media@vger.kernel.org);

2
Documentation/admin-guide/cifs/introduction.rst
View File

@ -9,7 +9,7 @@ Introduction
PC operating systems. New and improved versions of CIFS are now
called SMB2 and SMB3. Use of SMB3 (and later, including SMB3.1.1)
is strongly preferred over using older dialects like CIFS due to
security reaasons. All modern dialects, including the most recent,
security reasons. All modern dialects, including the most recent,
SMB3.1.1 are supported by the CIFS VFS module. The SMB3 protocol
is implemented and supported by all major file servers
such as all modern versions of Windows (including Windows 2016

6
Documentation/admin-guide/cifs/usage.rst
View File

@ -115,7 +115,7 @@ later source tree in docs/manpages/mount.cifs.8
Allowing User Unmounts
======================
To permit users to ummount directories that they have user mounted (see above),
To permit users to unmount directories that they have user mounted (see above),
the utility umount.cifs may be used. It may be invoked directly, or if
umount.cifs is placed in /sbin, umount can invoke the cifs umount helper
(at least for most versions of the umount utility) for umount of cifs
@ -197,7 +197,7 @@ that is ignored by local server applications and non-cifs clients and that will
not be traversed by the Samba server). This is opaque to the Linux client
application using the cifs vfs. Absolute symlinks will work to Samba 3.0.5 or
later, but only for remote clients using the CIFS Unix extensions, and will
be invisbile to Windows clients and typically will not affect local
be invisible to Windows clients and typically will not affect local
applications running on the same server as Samba.
Use instructions
@ -267,7 +267,7 @@ would be forbidden for Windows/CIFS semantics) as long as the server is
configured for Unix Extensions (and the client has not disabled
/proc/fs/cifs/LinuxExtensionsEnabled). In addition the mount option
``mapposix`` can be used on CIFS (vers=1.0) to force the mapping of
illegal Windows/NTFS/SMB characters to a remap range (this mount parm
illegal Windows/NTFS/SMB characters to a remap range (this mount parameter
is the default for SMB3). This remap (``mapposix``) range is also
compatible with Mac (and "Services for Mac" on some older Windows).

4
Documentation/admin-guide/device-mapper/dm-crypt.rst
View File

@ -46,7 +46,7 @@ Parameters::
capi:authenc(hmac(sha256),xts(aes))-random
capi:rfc7539(chacha20,poly1305)-random
The /proc/crypto contains a list of curently loaded crypto modes.
The /proc/crypto contains a list of currently loaded crypto modes.
<key>
Key used for encryption. It is encoded either as a hexadecimal number
@ -92,7 +92,7 @@ Parameters::
<#opt_params>
Number of optional parameters. If there are no optional parameters,
the optional paramaters section can be skipped or #opt_params can be zero.
the optional parameters section can be skipped or #opt_params can be zero.
Otherwise #opt_params is the number of following arguments.
Example of optional parameters section:

4
Documentation/admin-guide/device-mapper/dm-integrity.rst
View File

@ -117,7 +117,7 @@ journal_watermark:number
commit_time:number
Commit time in milliseconds. When this time passes, the journal is
written. The journal is also written immediatelly if the FLUSH
written. The journal is also written immediately if the FLUSH
request is received.
internal_hash:algorithm(:key) (the key is optional)
@ -147,7 +147,7 @@ journal_crypt:algorithm(:key) (the key is optional)
"salsa20" or "ctr(aes)").
The journal contains history of last writes to the block device,
an attacker reading the journal could see the last sector nubmers
an attacker reading the journal could see the last sector numbers
that were written. From the sector numbers, the attacker can infer
the size of files that were written. To protect against this
situation, you can encrypt the journal.

2
Documentation/admin-guide/device-mapper/dm-raid.rst
View File

@ -418,6 +418,6 @@ Version History
specific devices are requested via rebuild. Fix RAID leg
rebuild errors.
1.15.0 Fix size extensions not being synchronized in case of new MD bitmap
pages allocated; also fix those not occuring after previous reductions
pages allocated; also fix those not occurring after previous reductions
1.15.1 Fix argument count and arguments for rebuild/write_mostly/journal_(dev|mode)
on the status line.

6
Documentation/admin-guide/device-mapper/dm-zoned.rst
View File

@ -24,7 +24,7 @@ The dm-zoned implementation is simple and minimizes system overhead (CPU
and memory usage as well as storage capacity loss). For a 10TB
host-managed disk with 256 MB zones, dm-zoned memory usage per disk
instance is at most 4.5 MB and as little as 5 zones will be used
internally for storing metadata and performaing reclaim operations.
internally for storing metadata and performing reclaim operations.
dm-zoned target devices are formatted and checked using the dmzadm
utility available at:
@ -102,7 +102,7 @@ the buffer zone assigned. If the accessed chunk has no mapping, or the
accessed blocks are invalid, the read buffer is zeroed and the read
operation terminated.
After some time, the limited number of convnetional zones available may
After some time, the limited number of conventional zones available may
be exhausted (all used to map chunks or buffer sequential zones) and
unaligned writes to unbuffered chunks become impossible. To avoid this
situation, a reclaim process regularly scans used conventional zones and
@ -158,7 +158,7 @@ Ex::
dmzadm --format /dev/sdxx /dev/sdyy
Fomatted device(s) can be started with the dmzadm utility, too.:
Formatted device(s) can be started with the dmzadm utility, too.:
Ex::

2
Documentation/admin-guide/device-mapper/verity.rst
View File

@ -69,7 +69,7 @@ Construction Parameters
<#opt_params>
Number of optional parameters. If there are no optional parameters,
the optional paramaters section can be skipped or #opt_params can be zero.
the optional parameters section can be skipped or #opt_params can be zero.
Otherwise #opt_params is the number of following arguments.
Example of optional parameters section:

4
Documentation/admin-guide/device-mapper/writecache.rst
View File

@ -37,10 +37,10 @@ Constructor parameters:
autocommit_blocks n (default: 64 for pmem, 65536 for ssd)
when the application writes this amount of blocks without
issuing the FLUSH request, the blocks are automatically
commited
committed
autocommit_time ms (default: 1000)
autocommit time in milliseconds. The data is automatically
commited if this time passes and no FLUSH request is
committed if this time passes and no FLUSH request is
received
fua (by default on)
applicable only to persistent memory - use the FUA flag

3
Documentation/admin-guide/features.rst Normal file
View File

@ -0,0 +1,3 @@
.. SPDX-License-Identifier: GPL-2.0
.. kernel-feat:: $srctree/Documentation/features

2
Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
View File

@ -60,7 +60,7 @@ Hyper-Thread attacks are possible.
The victim of a malicious actor does not need to make use of TSX. Only the
attacker needs to begin a TSX transaction and raise an asynchronous abort
which in turn potenitally leaks data stored in the buffers.
which in turn potentially leaks data stored in the buffers.
More detailed technical information is available in the TAA specific x86
architecture section: :ref:`Documentation/x86/tsx_async_abort.rst <tsx_async_abort>`.

4
Documentation/admin-guide/index.rst
View File

@ -19,6 +19,7 @@ etc.
sysctl/index
abi
features
This section describes CPU vulnerabilities and their mitigations.
@ -33,7 +34,8 @@ problems and bugs in particular.
.. toctree::
:maxdepth: 1
reporting-bugs
reporting-issues
Reporting bugs (obsolete) <reporting-bugs>
security-bugs
bug-hunting
bug-bisect

1
Documentation/admin-guide/kernel-parameters.rst
View File

@ -172,6 +172,7 @@ parameter is applicable::
X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64)
X86_UV SGI UV support is enabled.
XEN Xen support is enabled
XTENSA xtensa architecture is enabled.
In addition, the following text indicates that the option::

2
Documentation/admin-guide/kernel-parameters.txt
View File

@ -2709,7 +2709,7 @@
option description.
memmap=nn[KMG]@ss[KMG]
[KNL] Force usage of a specific region of memory.
[KNL, X86, MIPS, XTENSA] Force usage of a specific region of memory.
Region of memory to be used is from ss to ss+nn.
If @ss[KMG] is omitted, it is equivalent to mem=nn[KMG],
which limits max address to nn[KMG].

2
Documentation/admin-guide/md.rst
View File

@ -221,7 +221,7 @@ All md devices contain:
layout
The ``layout`` for the array for the particular level. This is
simply a number that is interpretted differently by different
simply a number that is interpreted differently by different
levels. It can be written while assembling an array.
array_size

2
Documentation/admin-guide/media/bttv.rst
View File

@ -77,7 +77,7 @@ the Subsystem ID in the second line, looks like this:
only bt878-based cards can have a subsystem ID (which does not mean
that every card really has one). bt848 cards can't have a Subsystem
ID and therefore can't be autodetected. There is a list with the ID's
at :doc:`bttv-cardlist` (in case you are intrested or want to mail
at :doc:`bttv-cardlist` (in case you are interested or want to mail
patches with updates).

2
Documentation/admin-guide/media/dvb_references.rst
View File

@ -10,7 +10,7 @@ The DVB mailing list linux-dvb is hosted at vger. Please see
http://vger.kernel.org/vger-lists.html#linux-media for details.
There are also some other old lists hosted at:
https://linuxtv.org/lists.php. If you're insterested on that for historic
https://linuxtv.org/lists.php. If you're interested on that for historic
reasons, please check the archive at https://linuxtv.org/pipermail/linux-dvb/.
The media subsystem Wiki is hosted at https://linuxtv.org/wiki/.

4
Documentation/admin-guide/media/frontend-cardlist.rst
View File

@ -68,7 +68,7 @@ cx24116 Conexant CX24116 based
cx24117 Conexant CX24117 based
cx24120 Conexant CX24120 based
cx24123 Conexant CX24123 based
ds3000 Montage Tehnology DS3000 based
ds3000 Montage Technology DS3000 based
mb86a16 Fujitsu MB86A16 based
mt312 Zarlink VP310/MT312/ZL10313 based
s5h1420 Samsung S5H1420 based
@ -83,7 +83,7 @@ tda10086 Philips TDA10086 based
tda8083 Philips TDA8083 based
tda8261 Philips TDA8261 based
tda826x Philips TDA826X silicon tuner
ts2020 Montage Tehnology TS2020 based tuners
ts2020 Montage Technology TS2020 based tuners
tua6100 Infineon TUA6100 PLL
cx24113 Conexant CX24113/CX24128 tuner for DVB-S/DSS
itd1000 Integrant ITD1000 Zero IF tuner for DVB-S/DSS

2
Documentation/admin-guide/media/gspca-cardlist.rst
View File

@ -305,7 +305,7 @@ pac7302 093a:2625 Genius iSlim 310
pac7302 093a:2626 Labtec 2200
pac7302 093a:2627 Genius FaceCam 300
pac7302 093a:2628 Genius iLook 300
pac7302 093a:2629 Genious iSlim 300
pac7302 093a:2629 Genius iSlim 300
pac7302 093a:262a Webcam 300k
pac7302 093a:262c Philips SPC 230 NC
jl2005bcd 0979:0227 Various brands, 19 known cameras supported

6
Documentation/admin-guide/media/ipu3.rst
View File

@ -86,7 +86,7 @@ raw Bayer format that is specific to IPU3.
Let us take the example of ov5670 sensor connected to CSI2 port 0, for a
2592x1944 image capture.
Using the media contorller APIs, the ov5670 sensor is configured to send
Using the media controller APIs, the ov5670 sensor is configured to send
frames in packed raw Bayer format to IPU3 CSI2 receiver.
.. code-block:: none
@ -313,8 +313,8 @@ configuration steps of 0.03125 (1/32).
**Geometric Distortion Correction**
Geometric Distortion Correction is used to performe correction of distortions
and image filtering. It needs some extra filter and envelop padding pixels to
Geometric Distortion Correction is used to perform correction of distortions
and image filtering. It needs some extra filter and envelope padding pixels to
work, so the input resolution of GDC should be larger than the output
resolution.

2
Documentation/admin-guide/media/remote-controller.rst
View File

@ -68,7 +68,7 @@ Using without lircd
Xorg recognizes several IR keycodes that have its numerical value lower
than 247. With the advent of Wayland, the input driver got updated too,
and should now accept all keycodes. Yet, you may want to just reasign
and should now accept all keycodes. Yet, you may want to just reassign
the keycodes to something that your favorite media application likes.
This can be done by setting

4
Documentation/admin-guide/mm/index.rst
View File

@ -3,9 +3,9 @@ Memory Management
=================
Linux memory management subsystem is responsible, as the name implies,
for managing the memory in the system. This includes implemnetation of
for managing the memory in the system. This includes implementation of
virtual memory and demand paging, memory allocation both for kernel
internal structures and user space programms, mapping of files into
internal structures and user space programs, mapping of files into
processes address space and many other cool things.
Linux memory management is a complex system with many configurable

2
Documentation/admin-guide/mm/numaperf.rst
View File

@ -74,7 +74,7 @@ memory node's access class 0 initiators as follows::
/sys/devices/system/node/nodeY/access0/initiators/
These attributes apply only when accessed from nodes that have the
are linked under the this access's inititiators.
are linked under the this access's initiators.
The performance characteristics the kernel provides for the local initiators
are exported are as follows::

2
Documentation/admin-guide/mm/userfaultfd.rst
View File

@ -114,7 +114,7 @@ Notes:
you must provide some kind of page in your thread after reading from
the uffd. You must provide either ``UFFDIO_COPY`` or ``UFFDIO_ZEROPAGE``.
The normal behavior of the OS automatically providing a zero page on
an annonymous mmaping is not in place.
an anonymous mmaping is not in place.
- None of the page-delivering ioctls default to the range that you
registered with. You must fill in all fields for the appropriate

2
Documentation/admin-guide/module-signing.rst
View File

@ -106,7 +106,7 @@ This has a number of options available:
certificate and a private key.
If the PEM file containing the private key is encrypted, or if the
PKCS#11 token requries a PIN, this can be provided at build time by
PKCS#11 token requires a PIN, this can be provided at build time by
means of the ``KBUILD_SIGN_PIN`` variable.

2
Documentation/admin-guide/perf/imx-ddr.rst
View File

@ -4,7 +4,7 @@ Freescale i.MX8 DDR Performance Monitoring Unit (PMU)
There are no performance counters inside the DRAM controller, so performance
signals are brought out to the edge of the controller where a set of 4 x 32 bit
counters is implemented. This is controlled by the CSV modes programed in counter
counters is implemented. This is controlled by the CSV modes programmed in counter
control register which causes a large number of PERF signals to be generated.
Selection of the value for each counter is done via the config registers. There

4
Documentation/admin-guide/pm/intel-speed-select.rst
View File

@ -57,7 +57,7 @@ To get help on a command, another level of help is provided. For example for the
Summary of platform capability
------------------------------
To check the current platform and driver capaibilities, execute::
To check the current platform and driver capabilities, execute::
#intel-speed-select --info
@ -658,7 +658,7 @@ If -a option is not used, then the following steps are required before enabling
Intel(R) SST-BF:
- Discover Intel(R) SST-BF and note low and high priority base frequency
- Note the high prioity CPU list
- Note the high priority CPU list
- Enable CLOS using core-power feature set
- Configure CLOS parameters. Use CLOS.min to set to minimum performance
- Subscribe desired CPUs to CLOS groups

6
Documentation/admin-guide/pm/intel_pstate.rst
View File

@ -56,7 +56,7 @@ Operation Modes
``intel_pstate`` can operate in two different modes, active or passive. In the
active mode, it uses its own internal performance scaling governor algorithm or
allows the hardware to do preformance scaling by itself, while in the passive
allows the hardware to do performance scaling by itself, while in the passive
mode it responds to requests made by a generic ``CPUFreq`` governor implementing
a certain performance scaling algorithm. Which of them will be in effect
depends on what kernel command line options are used and on the capabilities of
@ -380,13 +380,13 @@ argument is passed to the kernel in the command line.
``no_turbo``
If set (equal to 1), the driver is not allowed to set any turbo P-states
(see `Turbo P-states Support`_). If unset (equalt to 0, which is the
(see `Turbo P-states Support`_). If unset (equal to 0, which is the
default), turbo P-states can be set by the driver.
[Note that ``intel_pstate`` does not support the general ``boost``
attribute (supported by some other scaling drivers) which is replaced
by this one.]
This attrubute does not affect the maximum supported frequency value
This attribute does not affect the maximum supported frequency value
supplied to the ``CPUFreq`` core and exposed via the policy interface,
but it affects the maximum possible value of per-policy P-state limits
(see `Interpretation of Policy Attributes`_ below for details).

2
Documentation/admin-guide/ramoops.rst
View File

@ -22,7 +22,7 @@ and type of the memory area are set using three variables:
* ``mem_address`` for the start
* ``mem_size`` for the size. The memory size will be rounded down to a
power of two.
* ``mem_type`` to specifiy if the memory type (default is pgprot_writecombine).
* ``mem_type`` to specify if the memory type (default is pgprot_writecombine).
Typically the default value of ``mem_type=0`` should be used as that sets the pstore
mapping to pgprot_writecombine. Setting ``mem_type=1`` attempts to use

5
Documentation/admin-guide/reporting-bugs.rst
View File

@ -1,5 +1,10 @@
.. _reportingbugs:
.. note::
This document is obsolete, and will be replaced by
'Documentation/admin-guide/reporting-issues.rst' in the near future.
Reporting bugs
++++++++++++++

1631
Documentation/admin-guide/reporting-issues.rst Normal file
View File

File diff suppressed because it is too large Load Diff

2
Documentation/admin-guide/security-bugs.rst
View File

@ -21,7 +21,7 @@ understand and fix the security vulnerability.
As it is with any bug, the more information provided the easier it
will be to diagnose and fix. Please review the procedure outlined in
:doc:`reporting-bugs` if you are unclear about what
'Documentation/admin-guide/reporting-issues.rst' if you are unclear about what
information is helpful. Any exploit code is very helpful and will not
be released without consent from the reporter unless it has already been
made public.

2
Documentation/admin-guide/sysctl/abi.rst
View File

@ -28,7 +28,7 @@ vsyscall32 (x86)
Determines whether the kernels maps a vDSO page into 32-bit processes;
can be set to 1 to enable, or 0 to disable. Defaults to enabled if
``CONFIG_COMPAT_VDSO`` is set, disabled otherwide.
``CONFIG_COMPAT_VDSO`` is set, disabled otherwise.
This controls the same setting as the ``vdso32`` kernel boot
parameter.

18
Documentation/admin-guide/sysctl/kernel.rst
View File

@ -14,7 +14,7 @@ For general info and legal blurb, please look in :doc:`index`.
------------------------------------------------------------------------------
This file contains documentation for the sysctl files in
``/proc/sys/kernel/`` and is valid for Linux kernel version 2.2.
``/proc/sys/kernel/``.
The files in this directory can be used to tune and monitor
miscellaneous and general things in the operation of the Linux
@ -879,7 +879,7 @@ The default value is 127.
perf_event_mlock_kb
===================
Control size of per-cpu ring buffer not counted agains mlock limit.
Control size of per-cpu ring buffer not counted against mlock limit.
The default value is 512 + 1 page
@ -1095,8 +1095,8 @@ Enables/disables scheduler statistics. Enabling this feature
incurs a small amount of overhead in the scheduler but is
useful for debugging and performance tuning.
sched_util_clamp_min:
=====================
sched_util_clamp_min
====================
Max allowed *minimum* utilization.
@ -1106,8 +1106,8 @@ It means that any requested uclamp.min value cannot be greater than
sched_util_clamp_min, i.e., it is restricted to the range
[0:sched_util_clamp_min].
sched_util_clamp_max:
=====================
sched_util_clamp_max
====================
Max allowed *maximum* utilization.
@ -1117,8 +1117,8 @@ It means that any requested uclamp.max value cannot be greater than
sched_util_clamp_max, i.e., it is restricted to the range
[0:sched_util_clamp_max].
sched_util_clamp_min_rt_default:
================================
sched_util_clamp_min_rt_default
===============================
By default Linux is tuned for performance. Which means that RT tasks always run
at the highest frequency and most capable (highest capacity) CPU (in
@ -1336,7 +1336,7 @@ ORed together. The letters are seen in "Tainted" line of Oops reports.
====== ===== ==============================================================
1 `(P)` proprietary module was loaded
2 `(F)` module was force loaded
4 `(S)` SMP kernel oops on an officially SMP incapable processor
4 `(S)` kernel running on an out of specification system
8 `(R)` module was force unloaded
16 `(M)` processor reported a Machine Check Exception (MCE)
32 `(B)` bad page referenced or some unexpected page flags

2
Documentation/admin-guide/sysctl/vm.rst
View File

@ -146,7 +146,7 @@ This should be used on systems where stalls for minor page faults are an
acceptable trade for large contiguous free memory. Set to 0 to prevent
compaction from moving pages that are unevictable. Default value is 1.
On CONFIG_PREEMPT_RT the default value is 0 in order to avoid a page fault, due
to compaction, which would block the task from becomming active until the fault
to compaction, which would block the task from becoming active until the fault
is resolved.

23
Documentation/admin-guide/tainted-kernels.rst
View File

@ -84,7 +84,7 @@ Bit Log Number Reason that got the kernel tainted
=== === ====== ========================================================
0 G/P 1 proprietary module was loaded
1 _/F 2 module was force loaded
2 _/S 4 SMP kernel oops on an officially SMP incapable processor
2 _/S 4 kernel running on an out of specification system
3 _/R 8 module was force unloaded
4 _/M 16 processor reported a Machine Check Exception (MCE)
5 _/B 32 bad page referenced or some unexpected page flags
@ -116,10 +116,23 @@ More detailed explanation for tainting
1) ``F`` if any module was force loaded by ``insmod -f``, ``' '`` if all
modules were loaded normally.
2) ``S`` if the oops occurred on an SMP kernel running on hardware that
hasn't been certified as safe to run multiprocessor.
Currently this occurs only on various Athlons that are not
SMP capable.
2) ``S`` if the kernel is running on a processor or system that is out of
specification: hardware has been put into an unsupported configuration,
therefore proper execution cannot be guaranteed.
Kernel will be tainted if, for example:
- on x86: PAE is forced through forcepae on intel CPUs (such as Pentium M)
which do not report PAE but may have a functional implementation, an SMP
kernel is running on non officially capable SMP Athlon CPUs, MSRs are
being poked at from userspace.
- on arm: kernel running on certain CPUs (such as Keystone 2) without
having certain kernel features enabled.
- on arm64: there are mismatched hardware features between CPUs, the
bootloader has booted CPUs in different modes.
- certain drivers are being used on non supported architectures (such as
scsi/snic on something else than x86_64, scsi/ips on non
x86/x86_64/itanium, have broken firmware settings for the
irqchip/irq-gic on arm64 ...).
3) ``R`` if a module was force unloaded by ``rmmod -f``, ``' '`` if all
modules were unloaded normally.

3
Documentation/arm/features.rst Normal file
View File

@ -0,0 +1,3 @@
.. SPDX-License-Identifier: GPL-2.0
.. kernel-feat:: $srctree/Documentation/features arm

2
Documentation/arm/index.rst
View File

@ -23,6 +23,8 @@ ARM Architecture
vlocks
porting
features
SoC-specific documents
======================

10
Documentation/arm/sunxi.rst
View File

@ -158,3 +158,13 @@ SunXi family
* User Manual
https://linux-sunxi.org/images/4/46/Allwinner_H6_V200_User_Manual_V1.1.pdf
- Allwinner H616
* Datasheet
https://linux-sunxi.org/images/b/b9/H616_Datasheet_V1.0_cleaned.pdf
* User Manual
https://linux-sunxi.org/images/2/24/H616_User_Manual_V1.0_cleaned.pdf

2
Documentation/arm64/elf_hwcaps.rst
View File

@ -1,3 +1,5 @@
.. _elf_hwcaps_index:
================
ARM64 ELF hwcaps
================

3
Documentation/arm64/features.rst Normal file
View File

@ -0,0 +1,3 @@
.. SPDX-License-Identifier: GPL-2.0
.. kernel-feat:: $srctree/Documentation/features arm64

2
Documentation/arm64/index.rst
View File

@ -24,6 +24,8 @@ ARM64 Architecture
tagged-address-abi
tagged-pointers
features
.. only:: subproject and html
Indices

2
Documentation/arm64/perf.rst
View File

@ -1,5 +1,7 @@
.. SPDX-License-Identifier: GPL-2.0
.. _perf_index:
=====================
Perf Event Attributes
=====================

5
Documentation/conf.py
View File

@ -39,7 +39,7 @@ needs_sphinx = '1.3'
extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include',
'kfigure', 'sphinx.ext.ifconfig', 'automarkup',
'maintainers_include', 'sphinx.ext.autosectionlabel',
'kernel_abi']
'kernel_abi', 'kernel_feat']
#
# cdomain is badly broken in Sphinx 3+. Leaving it out generates *most*
@ -112,6 +112,9 @@ if major >= 3:
else:
extensions.append('cdomain')
if major == 1 and minor < 7:
sys.stderr.write('WARNING: Sphinx 1.7 or greater will be required as of '
'the 5.12 release\n')
# Ensure that autosectionlabel will produce unique names
autosectionlabel_prefix_document = True

4
Documentation/core-api/printk-formats.rst
View File

@ -531,7 +531,9 @@ For printing bitmap and its derivatives such as cpumask and nodemask,
%*pb outputs the bitmap with field width as the number of bits and %*pbl
output the bitmap as range list with field width as the number of bits.
Passed by reference.
The field width is passed by value, the bitmap is passed by reference.
Helper macros cpumask_pr_args() and nodemask_pr_args() are available to ease
printing cpumask and nodemask.
Flags bitfields such as page flags, gfp_flags
---------------------------------------------

9
Documentation/dev-tools/coccinelle.rst
View File

@ -224,14 +224,21 @@ you may want to use::
rm -f err.log
export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci
make coccicheck DEBUG_FILE="err.log" MODE=report SPFLAGS="--profile --show-trying" M=./drivers/mfd/arizona-irq.c
make coccicheck DEBUG_FILE="err.log" MODE=report SPFLAGS="--profile --show-trying" M=./drivers/mfd
err.log will now have the profiling information, while stdout will
provide some progress information as Coccinelle moves forward with
work.
NOTE:
DEBUG_FILE support is only supported when using coccinelle >= 1.0.2.
Currently, DEBUG_FILE support is only available to check folders, and
not single files. This is because checking a single file requires spatch
to be called twice leading to DEBUG_FILE being set both times to the same value,
giving rise to an error.
.cocciconfig support
--------------------

4
Documentation/dev-tools/kasan.rst
View File

@ -330,7 +330,7 @@ using something like insmod or modprobe. The module is called ``test_kasan``.
~~~~~~~~~~~~~
With ``CONFIG_KUNIT`` built-in, ``CONFIG_KASAN_KUNIT_TEST`` can be built-in
on any architecure that supports KASAN. These and any other KUnit
on any architecture that supports KASAN. These and any other KUnit
tests enabled will run and print the results at boot as a late-init
call.
@ -351,5 +351,5 @@ converted to KUnit. These tests can be run only as a module with
``CONFIG_KASAN`` built-in. The type of error expected and the
function being run is printed before the expression expected to give
an error. Then the error is printed, if found, and that test
should be interpretted to pass only if the error was the one expected
should be interpreted to pass only if the error was the one expected
by the test.

2
Documentation/dev-tools/kcov.rst
View File

@ -243,7 +243,7 @@ handles as they don't belong to a particular subsystem. The bytes 4-7 are
currently reserved and must be zero. In the future the number of bytes
used for the subsystem or handle ids might be increased.
When a particular userspace proccess collects coverage via a common
When a particular userspace process collects coverage via a common
handle, kcov will collect coverage for each code section that is annotated
to use the common handle obtained as kcov_handle from the current
task_struct. However non common handles allow to collect coverage

7
Documentation/dev-tools/kgdb.rst
View File

@ -63,10 +63,9 @@ will want to turn on ``CONFIG_DEBUG_INFO`` which is called
It is advised, but not required, that you turn on the
``CONFIG_FRAME_POINTER`` kernel option which is called :menuselection:`Compile
the kernel with frame pointers` in the config menu. This option inserts code
to into the compiled executable which saves the frame information in
registers or on the stack at different points which allows a debugger
such as gdb to more accurately construct stack back traces while
debugging the kernel.
into the compiled executable which saves the frame information in registers
or on the stack at different points which allows a debugger such as gdb to
more accurately construct stack back traces while debugging the kernel.
If the architecture that you are using supports the kernel option
``CONFIG_STRICT_KERNEL_RWX``, you should consider turning it off. This

3
Documentation/devicetree/bindings/submitting-patches.rst
View File

@ -25,7 +25,8 @@ I. For patch submitters
make dt_binding_check
See ../writing-schema.rst for more details about schema and tools setup.
See Documentation/devicetree/writing-schema.rst for more details about
schema and tools setup.
3) DT binding files should be dual licensed. The preferred license tag is
(GPL-2.0-only OR BSD-2-Clause).

6
Documentation/doc-guide/kernel-doc.rst
View File

@ -247,12 +247,12 @@ It is possible to document nested structs and unions, like::
struct {
int memb1;
int memb2;
}
};
struct {
void *memb3;
int memb4;
}
}
};
};
union {
struct {
int memb1;

2
Documentation/doc-guide/sphinx.rst
View File

@ -375,7 +375,7 @@ image format use SVG (:ref:`svg_image_example`)::
SVG image example
The kernel figure (and image) directive support **DOT** formated files, see
The kernel figure (and image) directive support **DOT** formatted files, see
* DOT: http://graphviz.org/pdf/dotguide.pdf
* Graphviz: http://www.graphviz.org/content/dot-language

1
Documentation/driver-api/index.rst
View File

@ -29,6 +29,7 @@ available subsections can be seen below.
infiniband
frame-buffer
regulator
reset
iio/index
input
usb/index

4
Documentation/driver-api/mtd/intel-spi.rst
View File

@ -52,7 +52,7 @@ Linux.
16384+0 records out
8388608 bytes (8.4 MB) copied, 10.0269 s, 837 kB/s
6) Verify the backup:
6) Verify the backup::
# sha1sum /dev/mtd0ro bios.bak
fdbb011920572ca6c991377c4b418a0502668b73 /dev/mtd0ro
@ -66,7 +66,7 @@ Linux.
# flash_erase /dev/mtd0 0 0
Erasing 4 Kibyte @ 7ff000 -- 100 % complete
8) Once completed without errors you can write the new BIOS image:
8) Once completed without errors you can write the new BIOS image::
# dd if=MNW2MAX1.X64.0092.R01.1605221712.bin of=/dev/mtd0

6
Documentation/driver-api/mtd/spi-nor.rst
View File

@ -34,7 +34,8 @@ Before this framework, the layer is like::
------------------------
SPI NOR chip
After this framework, the layer is like:
After this framework, the layer is like::
MTD
------------------------
SPI NOR framework
@ -45,7 +46,8 @@ Before this framework, the layer is like::
------------------------
SPI NOR chip
With the SPI NOR controller driver (Freescale QuadSPI), it looks like:
With the SPI NOR controller driver (Freescale QuadSPI), it looks like::
MTD
------------------------
SPI NOR framework

221
Documentation/driver-api/reset.rst Normal file
View File

@ -0,0 +1,221 @@
.. SPDX-License-Identifier: GPL-2.0-only
====================
Reset controller API
====================
Introduction
============
Reset controllers are central units that control the reset signals to multiple
peripherals.
The reset controller API is split into two parts:
the `consumer driver interface <#consumer-driver-interface>`__ (`API reference
<#reset-consumer-api>`__), which allows peripheral drivers to request control
over their reset input signals, and the `reset controller driver interface
<#reset-controller-driver-interface>`__ (`API reference
<#reset-controller-driver-api>`__), which is used by drivers for reset
controller devices to register their reset controls to provide them to the
consumers.
While some reset controller hardware units also implement system restart
functionality, restart handlers are out of scope for the reset controller API.
Glossary
--------
The reset controller API uses these terms with a specific meaning:
Reset line
Physical reset line carrying a reset signal from a reset controller
hardware unit to a peripheral module.
Reset control
Control method that determines the state of one or multiple reset lines.
Most commonly this is a single bit in reset controller register space that
either allows direct control over the physical state of the reset line, or
is self-clearing and can be used to trigger a predetermined pulse on the
reset line.
In more complicated reset controls, a single trigger action can launch a
carefully timed sequence of pulses on multiple reset lines.
Reset controller
A hardware module that provides a number of reset controls to control a
number of reset lines.
Reset consumer
Peripheral module or external IC that is put into reset by the signal on a
reset line.
Consumer driver interface
=========================
This interface provides an API that is similar to the kernel clock framework.
Consumer drivers use get and put operations to acquire and release reset
controls.
Functions are provided to assert and deassert the controlled reset lines,
trigger reset pulses, or to query reset line status.
When requesting reset controls, consumers can use symbolic names for their
reset inputs, which are mapped to an actual reset control on an existing reset
controller device by the core.
A stub version of this API is provided when the reset controller framework is
not in use in order to minimize the need to use ifdefs.
Shared and exclusive resets
---------------------------
The reset controller API provides either reference counted deassertion and
assertion or direct, exclusive control.
The distinction between shared and exclusive reset controls is made at the time
the reset control is requested, either via devm_reset_control_get_shared() or
via devm_reset_control_get_exclusive().
This choice determines the behavior of the API calls made with the reset
control.
Shared resets behave similarly to clocks in the kernel clock framework.
They provide reference counted deassertion, where only the first deassert,
which increments the deassertion reference count to one, and the last assert
which decrements the deassertion reference count back to zero, have a physical
effect on the reset line.
Exclusive resets on the other hand guarantee direct control.
That is, an assert causes the reset line to be asserted immediately, and a
deassert causes the reset line to be deasserted immediately.
Assertion and deassertion
-------------------------
Consumer drivers use the reset_control_assert() and reset_control_deassert()
functions to assert and deassert reset lines.
For shared reset controls, calls to the two functions must be balanced.
Note that since multiple consumers may be using a shared reset control, there
is no guarantee that calling reset_control_assert() on a shared reset control
will actually cause the reset line to be asserted.
Consumer drivers using shared reset controls should assume that the reset line
may be kept deasserted at all times.
The API only guarantees that the reset line can not be asserted as long as any
consumer has requested it to be deasserted.
Triggering
----------
Consumer drivers use reset_control_reset() to trigger a reset pulse on a
self-deasserting reset control.
In general, these resets can not be shared between multiple consumers, since
requesting a pulse from any consumer driver will reset all connected
peripherals.
The reset controller API allows requesting self-deasserting reset controls as
shared, but for those only the first trigger request causes an actual pulse to
be issued on the reset line.
All further calls to this function have no effect until all consumers have
called reset_control_rearm().
For shared reset controls, calls to the two functions must be balanced.
This allows devices that only require an initial reset at any point before the
driver is probed or resumed to share a pulsed reset line.
Querying
--------
Only some reset controllers support querying the current status of a reset
line, via reset_control_status().
If supported, this function returns a positive non-zero value if the given
reset line is asserted.
The reset_control_status() function does not accept a
`reset control array <#reset-control-arrays>`__ handle as its input parameter.
Optional resets
---------------
Often peripherals require a reset line on some platforms but not on others.
For this, reset controls can be requested as optional using
devm_reset_control_get_optional_exclusive() or
devm_reset_control_get_optional_shared().
These functions return a NULL pointer instead of an error when the requested
reset control is not specified in the device tree.
Passing a NULL pointer to the reset_control functions causes them to return
quietly without an error.
Reset control arrays
--------------------
Some drivers need to assert a bunch of reset lines in no particular order.
devm_reset_control_array_get() returns an opaque reset control handle that can
be used to assert, deassert, or trigger all specified reset controls at once.
The reset control API does not guarantee the order in which the individual
controls therein are handled.
Reset controller driver interface
=================================
Drivers for reset controller modules provide the functionality necessary to
assert or deassert reset signals, to trigger a reset pulse on a reset line, or
to query its current state.
All functions are optional.
Initialization
--------------
Drivers fill a struct :c:type:`reset_controller_dev` and register it with
reset_controller_register() in their probe function.
The actual functionality is implemented in callback functions via a struct
:c:type:`reset_control_ops`.
API reference
=============
The reset controller API is documented here in two parts:
the `reset consumer API <#reset-consumer-api>`__ and the `reset controller
driver API <#reset-controller-driver-api>`__.
Reset consumer API
------------------
Reset consumers can control a reset line using an opaque reset control handle,
which can be obtained from devm_reset_control_get_exclusive() or
devm_reset_control_get_shared().
Given the reset control, consumers can call reset_control_assert() and
reset_control_deassert(), trigger a reset pulse using reset_control_reset(), or
query the reset line status using reset_control_status().
.. kernel-doc:: include/linux/reset.h
:internal:
.. kernel-doc:: drivers/reset/core.c
:functions: reset_control_reset
reset_control_assert
reset_control_deassert
reset_control_status
reset_control_acquire
reset_control_release
reset_control_rearm
reset_control_put
of_reset_control_get_count
of_reset_control_array_get
devm_reset_control_array_get
reset_control_get_count
Reset controller driver API
---------------------------
Reset controller drivers are supposed to implement the necessary functions in
a static constant structure :c:type:`reset_control_ops`, allocate and fill out
a struct :c:type:`reset_controller_dev`, and register it using
devm_reset_controller_register().
.. kernel-doc:: include/linux/reset-controller.h
:internal:
.. kernel-doc:: drivers/reset/core.c
:functions: of_reset_simple_xlate
reset_controller_register
reset_controller_unregister
devm_reset_controller_register
reset_controller_add_lookup

17
Documentation/features/list-arch.sh
View File

@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
#
# Small script that visualizes the kernel feature support status
# of an architecture.
@ -7,18 +8,4 @@
ARCH=${1:-$(uname -m | sed 's/x86_64/x86/' | sed 's/i386/x86/')}
cd $(dirname $0)
echo "#"
echo "# Kernel feature support matrix of the '$ARCH' architecture:"
echo "#"
for F in */*/arch-support.txt; do
SUBSYS=$(echo $F | cut -d/ -f1)
N=$(grep -h "^# Feature name:" $F | cut -c25-)
C=$(grep -h "^# Kconfig:" $F | cut -c25-)
D=$(grep -h "^# description:" $F | cut -c25-)
S=$(grep -hv "^#" $F | grep -w $ARCH | cut -d\| -f3)
printf "%10s/%-22s:%s| %35s # %s\n" "$SUBSYS" "$N" "$S" "$C" "$D"
done
$(dirname $0)/../../scripts/get_feat.pl list --arch $ARCH

2
Documentation/features/locking/queued-rwlocks/arch-support.txt
View File

@ -22,7 +22,7 @@
| nios2: | TODO |
| openrisc: | ok |
| parisc: | TODO |
| powerpc: | TODO |
| powerpc: | ok |
| riscv: | TODO |
| s390: | TODO |
| sh: | TODO |

2
Documentation/features/locking/queued-spinlocks/arch-support.txt
View File

@ -22,7 +22,7 @@
| nios2: | TODO |
| openrisc: | ok |
| parisc: | TODO |
| powerpc: | TODO |
| powerpc: | ok |
| riscv: | TODO |
| s390: | TODO |
| sh: | TODO |

4
Documentation/features/seccomp/seccomp-filter/arch-support.txt
View File

@ -11,7 +11,7 @@
| arm: | ok |
| arm64: | ok |
| c6x: | TODO |
| csky: | TODO |
| csky: | ok |
| h8300: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
@ -25,7 +25,7 @@
| powerpc: | ok |
| riscv: | ok |
| s390: | ok |
| sh: | TODO |
| sh: | ok |
| sparc: | TODO |
| um: | ok |
| x86: | ok |

2
Documentation/features/time/context-tracking/arch-support.txt
View File

@ -11,7 +11,7 @@
| arm: | ok |
| arm64: | ok |
| c6x: | TODO |
| csky: | TODO |
| csky: | ok |
| h8300: | TODO |
| hexagon: | TODO |
| ia64: | TODO |

2
Documentation/features/time/virt-cpuacct/arch-support.txt
View File

@ -11,7 +11,7 @@
| arm: | ok |
| arm64: | ok |
| c6x: | TODO |
| csky: | TODO |
| csky: | ok |
| h8300: | TODO |
| hexagon: | TODO |
| ia64: | ok |

2
Documentation/filesystems/index.rst
View File

@ -113,7 +113,7 @@ Documentation for filesystem implementations.
sysv-fs
tmpfs
ubifs
ubifs-authentication.rst
ubifs-authentication
udf
virtiofs
vfat

4
Documentation/filesystems/mount_api.rst
View File

@ -774,7 +774,7 @@ process the parameters it is given.
should just be set to lie inside the low-to-high range.
If all is good, true is returned. If the table is invalid, errors are
logged to dmesg and false is returned.
logged to the kernel log buffer and false is returned.
* ::
@ -782,7 +782,7 @@ process the parameters it is given.
This performs some validation checks on a parameter description. It
returns true if the description is good and false if it is not. It will
log errors to dmesg if validation fails.
log errors to the kernel log buffer if validation fails.
* ::

1
Documentation/filesystems/proc.rst
View File

@ -546,6 +546,7 @@ encoded manner. The codes are the following:
nh no huge page advise flag
mg mergable advise flag
bt arm64 BTI guarded page
mt arm64 MTE allocation tags are enabled
== =======================================
Note that there is no guarantee that every flag and associated mnemonic will

3
Documentation/ia64/features.rst Normal file
View File

@ -0,0 +1,3 @@
.. SPDX-License-Identifier: GPL-2.0
.. kernel-feat:: $srctree/Documentation/features ia64

2
Documentation/ia64/index.rst
View File

@ -15,3 +15,5 @@ IA-64 Architecture
irq-redir
mca
serial
features

2
Documentation/index.rst
View File

@ -160,7 +160,7 @@ implementation.
ia64/index
m68k/index
mips/index
nios2/nios2
nios2/index
openrisc/index
parisc/index
powerpc/index

3
Documentation/m68k/features.rst Normal file
View File

@ -0,0 +1,3 @@
.. SPDX-License-Identifier: GPL-2.0
.. kernel-feat:: $srctree/Documentation/features m68k

2
Documentation/m68k/index.rst
View File

@ -10,6 +10,8 @@ m68k Architecture
kernel-options
buddha-driver
features
.. only:: subproject and html
Indices

3
Documentation/mips/features.rst Normal file
View File

@ -0,0 +1,3 @@
.. SPDX-License-Identifier: GPL-2.0
.. kernel-feat:: $srctree/Documentation/features mips

2
Documentation/mips/index.rst
View File

@ -11,6 +11,8 @@ MIPS-specific Documentation
booting
ingenic-tcu
features
.. only:: subproject and html
Indices

4
Documentation/networking/device_drivers/ethernet/3com/vortex.rst
View File

@ -374,8 +374,8 @@ steps you should take:
email address will be in the driver source or in the MAINTAINERS file.
- The contents of your report will vary a lot depending upon the
problem. If it's a kernel crash then you should refer to the
admin-guide/reporting-bugs.rst file.
problem. If it's a kernel crash then you should refer to
'Documentation/admin-guide/reporting-issues.rst'.
But for most problems it is useful to provide the following:

3
Documentation/nios2/features.rst Normal file
View File

@ -0,0 +1,3 @@
.. SPDX-License-Identifier: GPL-2.0
.. kernel-feat:: $srctree/Documentation/features nios2

12
Documentation/nios2/index.rst Normal file
View File

@ -0,0 +1,12 @@
.. SPDX-License-Identifier: GPL-2.0
==============================
Nios II Specific Documentation
==============================
.. toctree::
:maxdepth: 2
:numbered:
nios2
features

3
Documentation/openrisc/features.rst Normal file
View File

@ -0,0 +1,3 @@
.. SPDX-License-Identifier: GPL-2.0
.. kernel-feat:: $srctree/Documentation/features openrisc

2
Documentation/openrisc/index.rst
View File

@ -10,6 +10,8 @@ OpenRISC Architecture
openrisc_port
todo
features
.. only:: subproject and html
Indices

3
Documentation/parisc/features.rst Normal file
View File

@ -0,0 +1,3 @@
.. SPDX-License-Identifier: GPL-2.0
.. kernel-feat:: $srctree/Documentation/features parisc

2
Documentation/parisc/index.rst
View File

@ -10,6 +10,8 @@ PA-RISC Architecture
debugging
registers
features
.. only:: subproject and html
Indices

3
Documentation/powerpc/features.rst Normal file
View File

@ -0,0 +1,3 @@
.. SPDX-License-Identifier: GPL-2.0
.. kernel-feat:: $srctree/Documentation/features powerpc

2
Documentation/powerpc/index.rst
View File

@ -34,6 +34,8 @@ powerpc
vas-api
vcpudispatch_stats
features
.. only:: subproject and html
Indices

2
Documentation/process/clang-format.rst
View File

@ -97,7 +97,7 @@ it can be very useful.
There are integrations for many popular text editors. For some of them,
like vim, emacs, BBEdit and Visual Studio you can find support built-in.
For instructions, read the appropiate section at:
For instructions, read the appropriate section at:
https://clang.llvm.org/docs/ClangFormat.html

2
Documentation/process/embargoed-hardware-issues.rst
View File

@ -152,7 +152,7 @@ The disclosing party should provide a list of contacts for all other
entities who have already been, or should be, informed about the issue.
This serves several purposes:
- The list of disclosed entities allows communication accross the
- The list of disclosed entities allows communication across the
industry, e.g. other OS vendors, HW vendors, etc.
- The disclosed entities can be contacted to name experts who should

9
Documentation/process/howto.rst
View File

@ -348,11 +348,10 @@ tool. For details on how to use the kernel bugzilla, please see:
https://bugzilla.kernel.org/page.cgi?id=faq.html
The file :ref:`admin-guide/reporting-bugs.rst <reportingbugs>`
in the main kernel source directory has a good
template for how to report a possible kernel bug, and details what kind
of information is needed by the kernel developers to help track down the
problem.
The file 'Documentation/admin-guide/reporting-issues.rst' in the main kernel
source directory has a good template for how to report a possible kernel bug,
and details what kind of information is needed by the kernel developers to help
track down the problem.
Managing bug reports

4
Documentation/process/kernel-docs.rst
View File

@ -90,7 +90,7 @@ On-line docs
:Date: 2008
:Keywords: patches, review process, types of submissions, basic rules, case studies
:Description: This paper gives several experience values on what types of patches
there are and how likley they get merged.
there are and how likely they get merged.
:Abstract:
[...]. This paper examines some common problems for
submitting larger changes and some strategies to avoid problems.
@ -328,7 +328,7 @@ On-line docs
block devices, hardware interrupts, scsi, DMA, access to user memory,
memory allocation, timers.
:Description: A guide designed to help you get up to speed on the
concepts that are not intuitevly obvious, and to document the internal
concepts that are not intuitively obvious, and to document the internal
structures of Linux.
* Title: **Dynamic Kernels: Modularized Device Drivers**

2
Documentation/process/submitting-patches.rst
View File

@ -404,6 +404,8 @@ then you just add a line saying::
using your real name (sorry, no pseudonyms or anonymous contributions.)
This will be done for you automatically if you use ``git commit -s``.
Reverts should also include "Signed-off-by". ``git revert -s`` does that
for you.
Some people also put extra tags at the end. They'll just be ignored for
now, but you can do this to mark internal company procedures or just

Some files were not shown because too many files have changed in this diff Show More