ASoC: davinci-mcasp: Correct rx format unit configuration

In case of capture we should not use rotation. The reverse and mask is
enough to get the data align correctly from the bus to MCU:
Format	  data from bus    after reverse (XRBUF)
S16_LE:  |LSB|MSB|xxx|xxx|  |xxx|xxx|MSB|LSB|
S24_3LE: |LSB|DAT|MSB|xxx|  |xxx|MSB|DAT|LSB|
S24_LE:  |LSB|DAT|MSB|xxx|  |xxx|MSB|DAT|LSB|
S32_LE:  |LSB|DAT|DAT|MSB|  |MSB|DAT|DAT|LSB|

With this patch all supported formats will work for playback and capture.

Reported-by: Jyri Sarha <jsarha@ti.com> (broken S24_3LE capture)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
This commit is contained in:
Peter Ujfalusi 2014-09-04 10:52:53 +03:00 committed by Mark Brown
parent 7d1311b93e
commit fe0a29e163

View File

@ -459,8 +459,17 @@ static int davinci_config_channel_size(struct davinci_mcasp *mcasp,
{
u32 fmt;
u32 tx_rotate = (word_length / 4) & 0x7;
u32 rx_rotate = (32 - word_length) / 4;
u32 mask = (1ULL << word_length) - 1;
/*
* For captured data we should not rotate, inversion and masking is
* enoguh to get the data to the right position:
* Format data from bus after reverse (XRBUF)
* S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB|
* S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB|
* S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB|
* S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB|
*/
u32 rx_rotate = 0;
/*
* if s BCLK-to-LRCLK ratio has been configured via the set_clkdiv()